Tris 2-carboxyethyl Phosphine Research Articles

Selective and Efficient Cysteine Conjugation by Maleimides in the Presence of Phosphine Reductants.

Sulfhydryl functions of thiol-containing amino acids are prime attachment sites for conjugation of labels, ligands, or drugs to proteinaceous compounds. Usually the thiol is offered a xenobiotic electrophilic moiety from the molecule to be attached such as a maleimido function. As sulfhydryls tend to oxidize into disulfides they must be reduced before conjugation. A popular thiol reduction reagent in biosciences is the substituted phosphine tris(2-carboxyethyl)phosphine (TCEP). Yet, phosphines are nucleophilic, too, and thus potentially compete with thiols for the electron-poor alkene moiety of maleimide resulting in complex product mixtures. To overcome this shortcoming we developed a method to eliminate excess reducing agent in the reaction mixture by selective oxidation of the phosphine with azidobenzoic acid before coupling. This results in a selective and efficient labeling of cysteines by maleimides.

The Role of Tris(2-carboxyethyl)phosphine Reducing Agent in the Controlled Formation of α,ω-Alkanedithiols Monolayers on Au(111) with Monocoordinated and Bicoordinated Configurations.

The addition of the reducing agent tris(2-carboxyethyl) phosphine (TCEP) during the formation of α,ω-alkanedithiols monolayers on Au(111) using the immersion method produces the assembly of monolayers with bicoordinated molecules (both S-terminal groups bound to the surface) that have a reductive desorption potential that is more positive than for monolayers with monocoordinated molecules in a standing up configuration. We show that the use of TCEP either during formation of the monolayer or as a post treatment procedure allows the controlled formation of monolayers with bicoordinated or monocoordinated configurations. Density functional theory (DFT) calculations were performed to elucidate the role of TCEP in the formation of the bicoordinated configuration. We investigated the TCEP-dithiol interaction in ethanol solvent as well as the coadsorption of trimethylphosphine with 1,2-ethanedithiol on Au(111). The Brønsted base character of the phosphine facilitates the H exchange from the -SH groups of the dithiol to the phosphorus atom of TCEP with very low activation energy barriers, thus allowing the thiolate groups to bind to the Au(111) surface, thus yielding the bicoordinated configuration. Dithiol lifting mechanisms such as H exchange between S atoms and the formation of intra/inter layer disulfide bonds have much higher energy barriers.

Copper-Complexed Hydrogen Sulfide in Wine: Measurement by Gas Detection Tubes and Comparison of Release Approaches

Recent work suggests that copper complexes may serve as a latent source of free hydrogen sulfide (H2S) and other malodorous volatile thiols during wine storage. However, measurements of these complexes require analytical tools that are unavailable to most wineries. To facilitate additional studies of these compounds, we developed an inexpensive and convenient method for detecting copper-complexed H2S in wine with commercially available colorimetric gas detection tubes. Using brine dilution as a pretreatment, we observed that this approach showed acceptable detection limits (0.34 μg/L) and excellent H2S recovery from both model and real wines. Alternative approaches to H2S release from copper sulfide complexes were also investigated, including ethylenediaminetetraacetic acid (EDTA), neocuproine, ascorbic acid, and tris(2-carboxyethyl)phosphine (TCEP), alone and in combination. EDTA resulted in loss of free H2S. Partial recovery (35 to 70%) of H2S from model wines was achieved with the other reagents, with the release induced by ascorbic acid being of particular interest to winemakers. In a survey of seven commercial wines, the fraction of complexed H2S released by the brine was 80 to 95% of the total H2S pool, with lower releases observed for neocuproine and ascorbic acid. However, in several wines, TCEP treatment released higher concentrations of H2S from unknown precursors.

The Myeloablative Drug Busulfan Converts Cysteine to Dehydroalanine and Lanthionine in Redoxins.

The myeloablative agent busulfan (1,4-butanediol dimethanesulfonate) is an old drug that is used routinely to eliminate cancerous bone marrow prior to hematopoietic stem cell transplant. The myeloablative activity and systemic toxicity of busulfan have been ascribed to its ability to cross-link DNA. In contrast, here we demonstrate that incubation of busulfan with the thiol redox proteins glutaredoxin or thioredoxin at pH 7.4 and 37 °C results in the formation of putative S-tetrahydrothiophenium adducts at their catalytic Cys residues, followed by β-elimination to yield dehydroalanine. Both proteins contain a second Cys, in their catalytic C-X-X-C motif, which reacts with the dehydroalanine, the initial Cys adduct with busulfan, or the S-tetrahydrothiophenium, to form novel intramolecular cross-links. The reactivity of the dehydroalanine (DHA) formed is further demonstrated by adduction with glutathione to yield a lanthionine and by a novel reaction with the reducing agent tris(2-carboxyethyl)phosphine (TCEP), which yields a phosphine adduct via Michael addition to the DHA. Formation of a second quaternary organophosphonium salt via nucleophilic substitution with TCEP on the initial busulfan-protein adduct or on the THT(+)-Redoxin species is also observed. These results reveal a rich potential for reactions of busulfan with proteins in vitro, and likely in vivo. It is striking that several of the chemically altered protein products retain none of the atoms of busulfan, in contrast to typical drug-protein adducts or traditional protein modification reagents. In particular, the ability of a clinically used drug to convert Cys to dehydrolanine in intact proteins, and its subsequent reaction with biological thiols, is unprecedented.

A high-throughput hydrophilic interaction liquid chromatography coupled with a charged aerosol detector method to assess trisulfides in IgG1 monoclonal antibodies using tris(2-carboxyethyl)phosphine reaction products: Tris(2-carboxyethyl)phosphine-oxide and tris(2-carboxyethyl)phosphine-sulfide

A robust, high-throughput method using hydrophilic interaction liquid chromatography (HILIC) coupled with a charged aerosol detector (CAD) is reported as a novel approach for trisulfide quantitation in monoclonal antibodies (mAbs). The products of mAb reduction using tris(2-carboxyethyl)phosphine (TCEP) include a species (TCEP(S)) that is stoichiometrically produced from trisulfides. The TCEP reaction products are chromatographically separated, detected, and quantified by the HILICCAD method. The method was qualified to quantify trisulfides across a range of 1–40% (mol trisulfide/mol mAb). In all tested matrix components, assay linearity and intermediate precision were established with correlation coefficients (R2)>0.99, and relative standard deviations (RSD)<10%. A method comparability study was performed using peptide mapping LC–MS as an orthogonal measurement. For the range of 1–40% trisulfides, the analysis demonstrates that, on average, HILICCAD reads between 0.95 and 1.10 times the value of LC–MS with 95% confidence. Applications of the HILICCAD method include trisulfide determination in purified mAbs to be used in the production of cysteine-linked antibody-drug conjugates, and in cell culture development studies to understand sources of, and strategies for control of, trisulfides.

An electrochemical aptasensor for sensitive and selective detection of dopamine based on signal amplification of electrochemical-chemical redox cycling

This paper presented an electrochemical aptasensor for dopamine detection with high sensitivity and selectivity. The electrochemical signal was amplified by electrochemical-chemical redox cycling with tris(2-carboxyethyl)phosphine (TCEP) as the reducing reagent. Specifically, dopamine captured by the aptamer-covered gold nanoparticles-modified carbon glass electrode was cycled by TCEP after its electrochemical oxidization, enabling an increase in the anodic current. Because of the high specificity and strong binding affinity of aptamer to dopamine, the sensor is fairly selective in not responding to common interferences. The results of chronoamperometry indicated that this aptasensor allowed for the detection of dopamine in a linear concentration range of 5nM to 0.5μM. The detection limit was estimated to be 1.8nM. Additionally, the aptasensor was successfully applied to determine dopamine spiked in the serum sample and gave recoveries ranging from 94.6 to 107.2%. This work would also be valuable for development of new types of electrochemical sensors for determination of other electroactive substances by marrying specific receptors and effective reducing or oxidizing reagents.

Dependence of the structure and mechanics of metaphase chromosomes on oxidized cysteines.

We have found that reagents that reduce oxidized cysteines lead to destabilization of metaphase chromosome folding, suggesting that chemically linked cysteine residues may play a structural role in mitotic chromosome organization, in accord with classical studies by Dounce et al. (J Theor Biol 42:275-285, 1973) and Sumner (J Cell Sci 70:177-188, 1984a). Human chromosomes isolated into buffer unfold when exposed to dithiothreitol (DTT) or tris(2-carboxyethyl)phosphine (TCEP). In micromanipulation experiments which allow us to examine the mechanics of individual metaphase chromosomes, we have found that the gel-like elastic stiffness of native metaphase chromosomes is dramatically suppressed by DTT and TCEP, even before the chromosomes become appreciably unfolded. We also report protein labeling experiments on human metaphase chromosomes which allow us to tag oxidized and reduction-sensitive cysteine residues. PAGE analysis using fluorescent labels shows a small number of labeled bands. Mass spectrometry analysis of similarly labeled proteins provides a list of candidates for proteins with oxidized cysteines involved in chromosome organization, notably including components of condensin I, cohesin, the nucleosome-interacting proteins RCC1 and RCC2, as well as the RNA/DNA-binding protein NONO/p54NRB.

Controlling Peptide Self-Assembly through a Native Chemical Ligation/Desulfurization Strategy.

Self-assembled peptides were synthesized by using a native chemical ligation (NCL)/desulfurization strategy that maintained the chemical diversity of the self-assembled peptides. Herein, we employed oxo-ester-mediated NCL reactions to incorporate cysteine, a cysteine-based dipeptide, and a sterically hindered unnatural amino acid (penicillamine) into peptides. Self-assembly of the peptides resulted in the formation of self-supporting gels. Microscopy analysis indicated the formation of helical nanofibers, which were responsible for the formation of gel matrices. The self-assembly of the ligated peptides was governed by covalent and non-covalent interactions, as confirmed by FTIR, CD, fluorescence spectroscopy, and MS (ESI) analyses. Peptide disassembly was induced by desulfurization reactions with tris(2-carboxyethyl)phosphine (TCEP) and glutathione at 80 °C. Desulfurization reactions of the ligated peptides converted the Cys and penicillamine functionalities into Ala and Val moieties, respectively. The self-supporting gels showed significant shear-thinning and thixotropic properties.

Titanium Surface Priming with Phase-Transited Lysozyme to Establish a Silver Nanoparticle-Loaded Chitosan/Hyaluronic Acid Antibacterial Multilayer via Layer-by-Layer Self-Assembly.

ObjectivesThe formation of biofilm around implants, which is induced by immediate bacterial colonization after installation, is the primary cause of post-operation infection. Initial surface modification is usually required to incorporate antibacterial agents on titanium (Ti) surfaces to inhibit biofilm formation. However, simple and effective priming methods are still lacking for the development of an initial functional layer as a base for subsequent coatings on titanium surfaces. The purpose of our work was to establish a novel initial layer on Ti surfaces using phase-transited lysozyme (PTL), on which multilayer coatings can incorporate silver nanoparticles (AgNP) using chitosan (CS) and hyaluronic acid (HA) via a layer-by-layer (LbL) self-assembly technique.MethodsIn this study, the surfaces of Ti substrates were primed by dipping into a mixture of lysozyme and tris(2-carboxyethyl)phosphine (TCEP) to obtain PTL-functionalized Ti substrates. The subsequent alternating coatings of HA and chitosan loaded with AgNP onto the precursor layer of PTL were carried out via LbL self-assembly to construct multilayer coatings on Ti substrates.ResultsThe results of SEM and XPS indicated that the necklace-like PTL and self-assembled multilayer were successfully immobilized on the Ti substrates. The multilayer coatings loaded with AgNP can kill planktonic and adherent bacteria to 100% during the first 4 days. The antibacterial efficacy of the samples against planktonic and adherent bacteria achieved 65%-90% after 14 days. The sustained release of Ag over 14 days can prevent bacterial invasion until mucosa healing. Although the AgNP-containing structure showed some cytotoxicity, the toxicity can be reduced by controlling the Ag release rate and concentration.ConclusionsThe PTL priming method provides a promising strategy for fabricating long-term antibacterial multilayer coatings on titanium surfaces via the LbL self-assembly technique, which is effective in preventing implant-associated infections in the early stage.

Considerations in producing preferentially reduced half-antibody fragments

Half-antibody fragments are a promising reagent for biosensing, drug-delivery and labeling applications, since exposure of the free thiol group in the Fc hinge region allows oriented reaction. Despite the structural variations among the molecules of different IgG subclasses and those obtained from different hosts, only generalized preferential antibody reduction protocols are currently available. Preferential reduction of polyclonal sheep anti-digoxin, rabbit anti-Escherichia coli and anti-myoglobin class IgG antibodies to half-antibody fragments has been investigated. A mild reductant 2-mercaptoethylamine (2-MEA) and a slightly stronger reductant tris(2-carboxyethyl)phosphine (TCEP) were used and the fragments obtained were quantitatively determined by SDS-PAGE analysis. It has been shown that the yields of half-antibody fragments could be increased by lowering the pH of the reduction mixtures. However, antibody susceptibility to the reductants varied. At pH4.5 the highest yield of sheep anti-digoxin IgG half-antibody fragments was obtained with 1M 2-MEA. Conversely, rabbit IgG half-antibody fragments could only be obtained with the stronger reductant TCEP. Preferential reduction of rabbit anti-myoglobin IgG antibodies was optimized and the highest half-antibody yield was obtained with 35mM TCEP. Finally, it has been demonstrated that produced anti-myoglobin half-IgG fragments retained their binding activity.

Functional modification of wool fabric by thiol-epoxy click chemistry

The paper reports modification and characterization of wool fabrics achieved through thiol-epoxy click chemistry. A pretreatment with tris (2-carboxyethyl) phosphine (TCEP) as an effective reducing agent was carried out to produce thiol groups on wool surface. Glycidyl trimethyl ammonium chloride (GTAC) was later covalently bonded with wool fibers via thiol-epoxy reaction. The reaction was confirmed by SEM, FTIR, Raman and TG analysis. Antibacterial activity, antistatic property, hydrophilicity and dyeability of treated wool fabric were assessed. The results demonstrated that TCEP-GTAC treatment can endow wool fabric good antibacterial and antistatic properties as well as improved hydrophilicity. Tensile strength studies indicated fiber strength loss of ~12 % on modification.

Regenerable Thiophenolic Radical-Trapping Antioxidants.

Diphenyl disulfides carrying alkyltelluro groups in the o-, m-, and p-positions were prepared using ortho-lithiation and lithium halogen exchange reactions. The novel antioxidants showed only minimal inhibitory effect on the azo-initiated peroxidation of linoleic acid in chlorobenzene until reduced to the corresponding thiophenols by tris(2-carboxyethyl)phosphine (TCEP). The best in situ generated thiophenol (from 7c) under these conditions quenched peroxyl radicals more efficiently than α-tocopherol with an almost 3-fold increase in inhibition time.

Rapid detection of Salmonella using a redox cycling-based electrochemical method

An electrochemical method based on redox cycling combined with immunomagnetic separation and pre-concentration was developed for rapid and sensitive detection of Salmonella. Electrochemical methods for the detection of bacteria offer the advantages of instant quantification with minimal equipment. Unfortunately, the limits of detection are often poor compare to other transduction methods such as fluorescence and chemiliuminescence. We demonstrated an electrochemical method which is both rapid and has a low limit of detection. A two-step strategy, which included immunomagentic pre-concentration and redox cycling was used to amplify the signal. Magnetic beads modified with anti-Salmonella antibodies were used for separation and pre-concentration of Salmonella from phosphate buffered saline (PBS) and agricultural water. Then anti-Salmonella antibodies conjugated with alkaline phosphatase were employed for labeling the Salmonella which had been captured by magnetic beads. Alkaline phosphatase (ALP) catalyzed the substrate l-ascorbic acid 2-phosphate (AAP) to electroactive species l-ascorbic acid (AA) while tris(2-carboxyethyl)phosphine (TCEP) facilitated the regeneration of AA on the gold electrode to form redox cycling resulting in an amplified signal. Under the optimal conditions, the Salmonella in PBS buffer as well as in agricultural water were detected. The limit of detection of this approach was approximately 7.6 × 102 CFU/mL and 6.0 × 102 CFU/mL in PBS buffer and agricultural water, respectively, without pre-enrichment in 3 h. When the agricultural water has been pre-enriched for 4 h, the limit of detection was approximately 10 CFU/mL.

Chemical de-conjugation for investigating the stability of small molecule drugs in antibody-drug conjugates

Antibody-drug conjugates (ADCs) offer new therapeutic options for advanced cancer patients through precision killing with fewer side effects. The stability and efficacy of ADCs are closely related, emphasizing the urgency and importance of gaining a comprehensive understanding of ADC stability. In this work, a chemical de-conjugation approach was developed to investigate the in-situ stability of the small molecule drug while it is conjugated to the antibody. This method involves chemical-mediated release of the small molecule drug from the ADC and subsequent characterization of the released small molecule drug by HPLC. The feasibility of this technique was demonstrated utilizing a model ADC containing a disulfide linker that is sensitive to the reducing environment within cancer cells. Five reducing agents were screened for use in de-conjugation; tris(2-carboxyethyl) phosphine (TCEP) was selected for further optimization due to its high efficiency and clean impurity profile. The optimized de-conjugation assay was shown to have excellent specificity and precision. More importantly, it was shown to be stability indicating, enabling the identification and quantification of the small molecule drug and its degradation products under different formulation pHs and storage temperatures. In summary, the chemical de-conjugation strategy demonstrated here offers a powerful tool to assess the in-situ stability of small molecule drugs on ADCs and the resulting information will shed light on ADC formulation/process development and storage condition selection.

Preparation of conductive silk fabric with antibacterial properties by electroless silver plating

To obtain an efficient approach to metalize silk fabric, a novel method was explored and silver-plated silk was prepared. In this study, tris (2-carboxyethyl) phosphine (TCEP) was utilized as a reducing agent to generate thiol groups on the silk surface. These thiol groups react with silver ions to form metal complexes, which were used as catalytic seeds and successfully initiated electroless silver plating. A variety of methods, including Raman, XRD, TG, SEM and EDS were used to characterize the intermediates and final products. The results showed that a uniform and smooth metal layer could be obtained when compared with that without TCEP pretreatment. The silver-plated silk fabric exhibited good electrical conductivity and high anti-bacterial properties. These attractive features enable this conductive silk fabric to be a good candidate as a biomedical material.

Conformational analysis of large and highly disulfide-stabilized proteins by integrating online electrochemical reduction into an optimized H/D exchange mass spectrometry workflow.

Analysis of disulfide-bonded proteins by hydrogen/deuterium exchange mass spectrometry (HDX-MS) requires effective and rapid reduction of disulfide bonds before enzymatic digestion in order to increase sequence coverage. In a conventional HDX-MS workflow, disulfide bonds are reduced chemically by addition of a reducing agent to the quench solution (e.g., tris(2-carboxyethyl)phosphine (TCEP)). The chemical reduction, however, is severely limited under quenched conditions due to a narrow time window as well as low pH and temperature. Here, we demonstrate the real-world applicability of integrating electrochemical reduction into an online HDX-MS workflow. We have optimized the electrochemical reduction efficiency during HDX-MS analysis of two particularly challenging disulfide stabilized proteins: a therapeutic IgG1-antibody and nerve growth factor-β (NGF). Several different parameters (flow rate and applied square wave potential, as well as the type of labeling and quench buffer) were investigated, and the optimized workflow increased the sequence coverage of NGF from 46% with chemical reduction to 99%, when electrochemical reduction was applied. Additionally, the optimized workflow also enabled a similar high sequence coverage of 96% and 87% for the heavy and light chain of the IgG1-antibody, respectively. The presented results demonstrate the successful electrochemical reduction during HDX-MS analysis of both a small exceptional tightly disulfide-bonded protein (NGF) as well as the largest protein attempted to date (IgG1-antibody). We envision that online electrochemical reduction is poised to decrease the complexity of sample handling and increase the versatility of the HDX-MS technique.

Disulfide-Functionalized Diblock Copolymer Worm Gels.

Two strategies for introducing disulfide groups at the outer surface of RAFT-synthesized poly(glycerol monomethacrylate)-poly(2-hydroxypropyl methacrylate) (PGMA-PHPMA, or Gx-Hy for brevity) diblock copolymer worms are investigated. The first approach involved statistical copolymerization of GMA with a small amount of disulfide dimethacrylate (DSDMA, or D) comonomer to afford a G54-D0.50 macromolecular chain transfer agent (macro-CTA); this synthesis was conducted in relatively dilute solution in order to ensure mainly intramolecular cyclization and hence the formation of linear chains. Alternatively, a new disulfide-based bifunctional RAFT agent (DSDB) was used to prepare a G45-S-S-G45 (or (G45-S)2) macro-CTA. A binary mixture of a non-functionalized G55 macro-CTA was utilized with each of these two disulfide-based macro-CTAs in turn for the RAFT aqueous dispersion polymerization of 2-hydroxypropyl methacrylate (HPMA). By targeting a PHPMA DP of 130 and systematically varying the molar ratio of the two macro-CTAs, a series of disulfide-functionalized diblock copolymer worm gels were obtained. For both formulations, oscillatory rheology studies confirmed that higher disulfide contents led to stronger gels, presumably as a result of inter-worm covalent bond formation via disulfide/thiol exchange. Using the DSDB-based macro-CTA led to the strongest worm gels, and this formulation also proved to be more effective in suppressing the thermosensitive behavior that is observed for the nondisulfide-functionalized control worm gel. However, macroscopic precipitation occurred when the proportion of DSDB-based macro-CTA was increased to 50 mol %, whereas the DSDMA-based macro-CTA could be utilized at up to 80 mol %. Finally, the worm gel modulus could be reduced to that of a nondisulfide-containing worm gel by reductive cleavage of the inter-worm disulfide bonds using excess tris(2-carboxyethyl)phosphine (TCEP) to yield thiol groups. These new biomimetic worm gels are expected to exhibit enhanced muco-adhesion.

Redox proteomic analysis of the gastrocnemius muscle from adult and old mice.

The data provides information in support of the research article, “Differential Cysteine Labeling and Global Label-Free Proteomics Reveals an Altered Metabolic State in Skeletal Muscle Aging”, Journal of Proteome Research, 2014, 13 (11), 2008–21 [1]. Raw data is available from ProteomeXchange [2] with identifier PDX001054. The proteome of gastrocnemius muscle from adult and old mice was analyzed by global label-free proteomics and the relative quantification of specific reduced and reversibly oxidized Cysteine (Cys) residues was performed using Skyline [3]. Briefly, reduced Cysteine (Cys) containing peptides was alkylated using N-ethylmalemide (d0-NEM). Samples were desalted and reversibly oxidized Cys residues were reduced using tris(2-carboxyethyl)phosphine (TCEP) and the newly formed reduced Cys residues were labeled with heavy NEM( d5-NEM). Label-free analysis of the global proteome of adult (n=5) and old (n=4) gastrocnemius muscles was performed using Peaks7™ mass spectrometry data analysis software [4]. Relative quantification of Cys containing peptides that were identified as reduced (d(0) NEM labeled) and reversibly oxidized d(5)–NEM labeled was performed using the intensity of their precursor ions in Skyline. Results indicate that muscles from old mice show reduced redox flexibility particularly in proteins involved in the generation of precursor metabolites and energy metabolism, indicating a loss in the flexibility of the redox energy response.

Rapid method for the isolation of mammalian sperm DNA.

The unique DNA packaging of spermatozoa renders them resistant to DNA isolation techniques used for somatic cells, requiring alternative methods that are slow and labor intensive. Here we present a rapid method for isolating high-quality sperm DNA. Isolated human sperm cells were homogenized with 0.2 mm steel beads for 5 min at room temperature in the presence of guanidine thiocyanate lysis buffer supplemented with 50 mM tris(2-carboxyethyl)phosphine (TCEP). Our method yielded &gt;90% high-quality DNA using 3 different commercially available silica-based spin columns. DNA yields did not differ between immediate isolation (2.84 &plusmn; 0.04 pg/cell) and isolation after 2 weeks of homogenate storage at room temperature (2.91 &plusmn; 0.13 pg/cell). DNA methylation analyses revealed similar methylation levels at both time points for three imprinted loci. Our protocol has many advantages: it is conducted at room temperature; lengthy proteinase K (ProK) digestions are eliminated; the reducing agent, TCEP, is odorless and stable at room temperature; nucleic acids are stabilized, allowing storage of homogenate; and it is adaptable for other mammalian species. Taken together, the benefits of our improved method have important implications for settings where sample processing constraints exist.

An electrochemical microRNAs biosensor with the signal amplification of alkaline phosphatase and electrochemical–chemical–chemical redox cycling

MicroRNAs (MiRNAs) have been regarded as clinically important biomarkers and drug discovery targets. In this work, we reported a simple and ultrasensitive electrochemical method for miRNAs detection based on single enzyme amplification and electrochemical–chemical–chemical (ECC) redox cycling. Specifically, upon contact with the target miRNAs, the hairpin structure of biotinylated DNA immobilized on gold electrode was destroyed and the biotin group in DNA was forced away from the electrode surface, allowing for the coupling of streptavidin-conjugated alkaline phosphatase (SA-ALP). Then, ascorbic acid (AA, the enzymatic product of ALP) triggered the ECC redox cycling with ferrocene methanol (FcM) and tris(2-carboxyethyl)phosphine (TCEP) as the redox mediator and the chemical reducing reagent, respectively. The method was more sensitive than that with horseradish peroxidase (HRP) or glucose oxidase (GOx) triggered recycling since one ALP molecule captured by one target miRNA molecule promoted the production of thousands of AA. Analytical merits (e.g., detection limit, dynamic range, specificity, regeneration and reproducibility) were evaluated. The feasibility of the method for analysis of miRNA-21 in human serum has also been demonstrated.