Triplet-triplet Annihilation Research Articles

Near-Infrared-to-Visible Photon Upconversion with Efficiency Exceeding 21% Sensitized by InAs Quantum Dots.

Upconversion (UC) of incoherent near-infrared (NIR) photons to visible photons through sensitized triplet-triplet annihilation (TTA) shows great potential in solar energy harvesting, photocatalysis, and bioimaging. However, the efficiencies of NIR-to-visible TTA-UC systems lag considerably behind those of their visible-to-visible counterparts. Here, we report a novel NIR-to-yellow TTA-UC system with a record quantum yield (QY) of 21.1% (out of a 100% maximum) and a threshold intensity of 20.2 W/cm2 by using InAs-based colloidal quantum dots (QDs) as triplet photosensitizers. The key to success is the epitaxial growth of an ultrathin ZnSe shell on InAs QDs that passivates the surface defects without impeding triplet energy transfer (TET) from QDs to surface-bound tetracene. Transient absorption spectroscopy verifies efficient TET efficiency of more than 80%, along with sufficiently long triplet lifetime of tetracene molecules, leading to high-performance UC. Moreover, high UC QYs (>18%) remain when larger InAs-based QDs─of which the absorption peak is red-shifted by more than 50 nm─are used as sensitizers, indicating the great potential of InAs QDs to utilize NIR photons with lower energy.

Effects of donor substituents on the conformational heterogeneity, photophysical, mechanochromic and electroluminescent properties of the donor-substituted fluorine-containing triphenylpyrimidines

Three derivatives of fluorinated triphenylpyrimidine with the attached carbazole, phenothiazine, or acridan donor moieties are synthesized by Buchwald-Hartwig reactions. The impact of the donor units on emissive and other properties of the compounds is reported. The compounds exhibit excellent thermal stability, competitive photophysical phenomena such as room temperature phosphorescence (RTP) appearing when compounds are molecularly dispersed in the rigid polymer matrix and thermally activated delayed fluorescence (TADF). The compounds with carbazole and phenothiazine donor moieties show the manifestation of triplet–triplet annihilation in the electroluminescence when used as emitters in organic light-emitting diodes (OLEDs). The phenothiazine-containing compound exhibit dual photoluminescence with the blue-shifted peak corresponding to the quasi-axial conformer and a red-shifted peak to the quasi-equatorial conformer. This derivative shows reversible shifts of emission spectra exceeding 100 nm due to the stable (at least 4 cycles) mechanochromic luminescence under the application of external stimuli. After grinding the emission intensity maximum is observed at 555 nm, after fuming at. ca 448 nm and after melting at 555 nm. The photoluminescence shifts and ON/OFF delayed fluorescence of the phenothiazine-based emitter occur due to the alteration between the crystalline and amorphous states. Optimization of the device structure allows to control the charge balance resulting in external quantum efficiency of up to 5.7 % observed for the OLED based on the phenothiazine-based emitter. This compound also shows the biggest response to the presence of oxygen acting as the quencher of triplet excited energy. The film of the compound doped in rigid Zeonex shows an 8.4-fold increase in emission intensity after evacuation. The optical sensor fabricated using the derivative of fluorinated triphenylpyrimidine and phenothiazine is characterized by the Stern-Volmer constant 1.37 × 10-4 ppm−1.

Solar overall water-splitting by a spin-hybrid all-organic semiconductor

Direct solar-to-hydrogen conversion from pure water using all-organic heterogeneous catalysts remains elusive. The challenges are twofold: (i) full-band low-frequent photons in the solar spectrum cannot be harnessed into a unified S1 excited state for water-splitting based on the common Kasha-allowed S0 → S1 excitation; (ii) the H+ → H2 evolution suffers the high overpotential on pristine organic surfaces. Here, we report an organic molecular crystal nanobelt through the self-assembly of spin-one open-shell perylene diimide diradical anions (:PDI2-) and their tautomeric spin-zero closed-shell quinoid isomers (PDI2-). The self-assembled :PDI2-/PDI2- crystal nanobelt alters the spin-dependent excitation evolution, leading to spin-allowed S0S1 → 1(TT) → T1 + T1 singlet fission under visible-light (420 nm~700 nm) and a spin-forbidden S0 → T1 transition under near-infrared (700 nm~1100 nm) within spin-hybrid chromophores. With a triplet-triplet annihilation upconversion, a newly formed S1 excited state on the diradical-quinoid hybrid induces the H+ reduction through a favorable hydrophilic diradical-mediated electron transfer, which enables simultaneous H2 and O2 production from pure water with an average apparent quantum yield over 1.5% under the visible to near-infrared solar spectrum.

Carrier dynamics competition in the nanocrystal-molecule complex for triplet generation studied by transient-absorption spectroscopy

Owing to the long-lived decay of triplet excited state, extensive efforts have been devoted to efficient triplet generation for applications covering triplet–triplet annihilation for photon upconversion, photocycloaddition and photoredox catalysis. Among the candidates, nanocrystal-molecule complexes have received tremendous attention for triplet generation because of easier spin flip and negligible energy loss during intersystem crossing. However, the triplet energy transfer (TET) from nanocrystals (NCs) to molecules can be very complicated in actual situation due to intricate energy level alignment and inevitable defect states, which often involves various decay pathes of the excited state competing with TET. Understanding the detailed carrier dynamics in such complexes is strongly necessary for related applications. Here, a CdSe-TCA (5-tetracene carboxylic acid) complex with a Type-II like energy level alignment is synthesized through precisely adjusting the dimension of CdSe NC. Based on series of spectral measurements, especially the transient absorption (TA) spectroscopy, the results show various carrier dynamics including hole-transfer-mediated TET, Förster resonance energy transfer (FRET) and carrier trapping. Although the carrier trapping by defect states in CdSe NC is revealed not associated with the TET from CdSe to TCA, the FRET is proved to competing with the TET process. Both the FRET and defect states should be refrained for efficient TET in such complexes. This study could provide further insight for understanding the carrier dynamics competition in NC-molecule complexes for triplet generation and benefit related optoelectronics applications.

Photoluminescence Measurement of Triplet Sensitizer-Emitter Solution Using a Customized 3D-Printed Sample Holder

This study explores the photoluminescence (PL) measurement of triplet sensitizer-emitter (TSE) solutions using a custom 3D-printed sample holder, within the context of triplet-triplet annihilation based molecular photon upconversion (TTA-UC) systems targeting the Vis-to-UV spectral region. TTA-UC converts low-energy visible photons to higher-energy ultraviolet (UV) photons, holding promise for solar energy harvesting and photonics applications. Two TSE couples, 4CzIPN/TP and 4CzIPN/QP, were investigated, and their upconverted fluorescence spectra showed peaks at 344 nm and 354 nm / 370 nm, respectively, confirming efficient upconversion capabilities. The 3D-printed sample holder facilitated reproducible PL measurements, enabling the calculation of quantum yields (ΦUC). The 4CzIPN/TP and 4CzIPN/QP couples exhibited low quantum yields (0.028% and 0.043%, respectively), suggesting the need for improved deoxygenation methods to enhance the triplet-triplet annihilation process and overall quantum efficiency. Despite modest yields, successful UV upconverted fluorescence observation underscores the feasibility of the Vis-to-UV TTA-UC system. This study provides insights into TTA-UC optimization and demonstrates the utility of the 3D-printed sample holder for affordable and precise PL measurements, paving the way for future advancements in photonics and solar energy applications.

Enhancement of Blue Doping-Free and Hyperfluorescent Organic Light Emitting Diode Performance through Triplet–Triplet Annihilation in the Derivatives of Anthracene and Carbazole

Enhancement of Blue Doping-Free and Hyperfluorescent Organic Light Emitting Diode Performance through Triplet–Triplet Annihilation in the Derivatives of Anthracene and Carbazole

High-efficiency triplet-triplet annihilation upconversion microemulsion with facile preparation and decent air tolerance.

Current research of triplet-triplet annihilation upconversion (TTA-UC) faces difficulty such as overuse of organic solvents and quenching of excited triplet sensitizers by molecular oxygen. Herein, we propose an efficient and facile preparation strategy of TTA-UC microemulsion to overcome these issues. With simple device and short preparation process, air-stable TTA-UC with a high upconversion efficiency of 16.52% was achieved in microemulsion coassembled from TritonX114, tetrahydrofuran and upconverting chromophores (platinum octaethyl-porphyrin and 9,10-diphenylanthracene). This is comparable to the highest UC efficiency ever reported for TTA-UC microemulsion systems. The excellent UC performance of TX114-THF could be attributed to two perspectives. Firstly, small-size micelle accommodated chromophores up to high concentrations in organic phase, which promoted efficient molecular collision. Additionally, high absorbance at 532nm ensured full use of excitation light, getting more long wavelength photons involved in the TTA-UC process. Moreover, air-stable TTA-UC also performed well in microemulsion with various surfactants, including nonionic surfactants (Tween 20, Tween 80, Triton X-110, Triton X-114), ionic surfactants (sodium dodecyl sulfate, cetyltrimethyl ammonium bromide) and block copolymers (pluronic F127, pluronic P123), through three conjectural assembly models according to the structural characteristics of surfactant molecules (concentrated, uncompacted and scattered). These discoveries could provide estimable reference for selection of surfactants in relevant fields of TTA-UC.

Multifold Enhanced Photon Upconversion in a Composite Annihilator System Sensitized by Perovskite Nanocrystals.

Photon upconversion via triplet-triplet annihilation (TTA-UC) provides a pathway to overcoming the thermodynamic efficiency limits in single-junction solar cells by allowing the harvesting of sub-bandgap photons. Here, we use mixed halide perovskite nanocrystals (CsPbX3, X = Br/I) as triplet sensitizers, with excitation transfer to 9,10-diphenylanthracene (DPA) and/or 9,10-bis[(triisopropylsilyl)ethynyl]anthracene (TIPS-An) which act as the triplet annihilators. We observe that the upconversion efficiency is five times higher with the combination of both annihilators in a composite system compared to the sum of the individual single-acceptor systems. Our work illustrates the importance of using a composite system of annihilators to enhance TTA upconversion, demonstrated in a perovskite-sensitized system, with promise for a range of potential applications in light-harvesting, biomedical imaging, biosensing, therapeutics, and photocatalysis.

Programmable multimode optical encryption of advanced printable security inks by integrating structural color with Down/Up- conversion photoluminescence

Optical information encryption with high encoding capacities can significantly boost the security level of anti-counterfeiting in the scenario of guaranteeing the authenticity of a wide scope of common and luxury goods. In this work, a novel counterfeiting material with high-degree complexity is fabricated by microencapsulating cholesteric liquid crystals and triplet–triplet annihilation upconversion fluorophores to integrate structural coloration with fluorescence and upconversion photoluminescence. Moreover, the multimode security ink presents tailorable optical behaviors and programmable abilities on flexible substrates by various printing techniques, which offers distinct information encryption under different optical modes. The advanced strategy provides a practical versatile platform for high-secure-level multimode optical inks with largely enhanced encoding capacities, programmability, printability, and cost-effectiveness, which manifests enormous potentials for information encryption and anti-counterfeiting technology.

Triplet-Triplet Annihilation Upconverting Liposomes: Mechanistic Insights into the Role of Membranes in Two-Dimensional TTA-UC.

Triplet-triplet annihilation upconversion (TTA-UC) implemented in nanoparticle assemblies is of emerging interest in biomedical applications, including in drug delivery and imaging. As it is a bimolecular process, ensuring sufficient mobility of the sensitizer and annihilator to facilitate effective collision in the nanoparticle is key. Liposomes can provide the benefits of two-dimensional confinement and condensed concentration of the sensitizer and annihilator along with superior fluidity compared to other nanoparticle assemblies. They are also biocompatible and widely applied across drug delivery modalities. However, there are relatively few liposomal TTA-UC systems reported to date, so systematic studies of the influence of the liposomal environment on TTA-UC are currently lacking. Here, we report the first example of a BODIPY-based sensitizer TTA-UC system within liposomes and use this system to study TTA-UC generation and compare the relative intensity of the anti-Stokes signal for this system as a function of liposome composition and membrane fluidity. We report for the first time on time-resolved spectroscopic studies of TTA-UC in membranes. Nanosecond transient absorption data reveal the BODIPY-perylene dyad sensitizer has a long triplet lifetime in liposome with contributions from three triplet excited states, whose lifetimes are reduced upon coinclusion of the annihilator due to triplet-triplet energy transfer, to a greater extent than in solution. This indicates triplet energy transfer between the sensitizer and the annihilator is enhanced in the membrane system. Molecular dynamics simulations of the sensitizer and annihilator TTA collision complex are modeled in the membrane and confirm the co-orientation of the pair within the membrane structure and that the persistence time of the bound complex exceeds the TTA kinetics. Modeling also reliably predicted the diffusion coefficient for the sensitizer which matches closely with the experimental values from fluorescence correlation spectroscopy. The relative intensity of the TTA-UC output across nine liposomal systems of different lipid compositions was explored to examine the influence of membrane viscosity on upconversion (UC). UC showed the highest relative intensity for the most fluidic membranes and the weakest intensity for highly viscous membrane compositions, including a phase separation membrane. Overall, our study reveals that the co-orientation of the UC pair within the membrane is crucial for effective TTA-UC within a biomembrane and that the intensity of the TTA-UC output can be tuned in liposomal nanoparticles by modifying the phase and fluidity of the liposome. These new insights will aid in the design of liposomal TTA-UC systems for biomedical applications.

Ferromagnetically Coupled Chromium(III) Dimer Shows Luminescence and Sensitizes Photon Upconversion.

There has been much progress on mononuclear chromium(III) complexes featuring luminescence and photoredox activity, but dinuclear chromium(III) complexes have remained underexplored in these contexts until now. We identified a tridentate chelate ligand able to accommodate both meridional and facial coordination of chromium(III), to either access a mono- or a dinuclear chromium(III) complex depending on reaction conditions. This chelate ligand causes tetragonally distorted primary coordination spheres around chromium(III) in both complexes, entailing comparatively short excited-state lifetimes in the range of 400 to 800 ns in solution at room temperature and making photoluminescence essentially oxygen insensitive. The two chromium(III) ions in the dimer experience ferromagnetic exchange interactions that result in a high spin (S=3) ground state with a coupling constant of +9.3 cm-1. Photoinduced energy transfer from the luminescent ferromagnetically coupled dimer to an anthracene derivative results in sensitized triplet-triplet annihilation upconversion. Based on these proof-of-principle studies, dinuclear chromium(III) complexes seem attractive for the development of fundamentally new types of photophysics and photochemistry enabled by magnetic exchange interactions.

Electronic Couplings for Triplet-Triplet Annihilation Upconversion in Crystal Rubrene.

Triplet-triplet annihilation photon upconversion (TTA-UC) is a process able to repackage two low-frequency photons into light of higher energy. This transformation is typically orchestrated by the electronic degrees of freedom within organic compounds possessing suitable singlet and triplet energies and electronic couplings. In this work, we propose a computational protocol for the assessment of electronic couplings crucial to TTA-UC in molecular materials and apply it to the study of crystal rubrene. Our methodology integrates sophisticated yet computationally affordable approaches to quantify couplings in singlet and triplet energy transfer, the binding of triplet pairs, and the fusion to the singlet exciton. Of particular significance is the role played by charge-transfer states along the b-axis of rubrene crystal, acting as both partial quenchers of singlet energy transfer and mediators of triplet fusion. Our calculations identify the π-stacking direction as holding notable triplet energy transfer couplings, consistent with the experimentally observed anisotropic exciton diffusion. Finally, we have characterized the impact of thermally induced structural distortions, revealing their key role in the viability of triplet fusion and singlet fission. We posit that our approaches are transferable to a broad spectrum of organic molecular materials, offering a feasible means to quantify electronic couplings.

Triplet-Mediator Ligand-Protected Metal Nanocluster Sensitizers for Photon Upconversion.

Triplet-triplet annihilation photon upconversion (TTA-UC) is attracting a great deal of attention as a viable approach to exploit unutilized wavelengths of light in solar-driven devices. Recently, ligand-protected metal nanoclusters have emerged as a compelling platform for serving as triplet sensitizers for TTA-UC. In this study, we developed an atomically precise, triplet-mediator ligand (TL)-protected metal nanocluster, Au2Cu6(S-Adm)6[P(DPA)3]2 (Au2Cu6DPA; S-Adm = 1-adamanthanethiolate, DPA = 9,10-diphenylanthracene). In Au2Cu6DPA, the excitation of the Au2Cu6 core rapidly generates a metal-to-ligand charge transfer state, followed by the formation of the long-lived triplet state (approximately 150 μs) at a DPA site in the TL. By combining Au2Cu6DPA with a DPA annihilator, we achieved a red-to-blue upconversion quantum yield (ΦUCg) of 20.7 ± 0.4% (50% max.) with a low threshold excitation intensity of 36 mW cm-2 at 640 nm. This quantum yield almost reaches the maximum limit achievable using a DPA annihilator and establishes a record-setting value, outperforming previously reported nanocrystal and nanocluster sensitizers. Furthermore, strong upconversion emission based on a pseudo-first-order TTA process was observed under 1 sun illumination, indicating that the Au2Cu6DPA sensitizer holds promise for applications in solar-energy-based systems.

Tuning Excited State Character in Iridium(III) Photosensitizers and Its Influence on TTA-UC.

A series of mixed ligand, photoluminescent organometallic Ir(III) complexes have been synthesized to incorporate substituted 2-phenyl-1H-naphtho[2,3-d]imidazole cyclometalating ligands. The structures of three example complexes were categorically confirmed using X-ray crystallography each sharing very similar structural traits including evidence of interligand hydrogen bond contacts that account for the shielding effects observed in the 1H NMR spectra. The structural iterations of the cyclometalated ligand provide tuning of the principal electronic transitions that determine the visible absorption and emission properties of the complexes: emission can be tuned in the visible region between 550 and 610 nm and with triplet lifetimes up to 10 μs. The nature of the emitting state varies across the series of complexes, with different admixtures of ligand-centered and metal-to-ligand charge transfer triplet levels evident. Finally, the use of the complexes as photosensitizers in triplet-triplet annihilation energy upconversion (TTA-UC) was investigated in the solution state. The study showed that the complexes possessing the longest triplet lifetimes showed good viability as photosensitizers in TTA-UC. Therefore, the use of an electron-withdrawing group on the 2-phenyl-1H-naphtho[2,3-d]imidazole ligand framework can be used to rationally promote TTA-UC using this class of complex.

Supramolecular Annihilator with DPA Parallelly Arranged by Multiple Hydrogen-Bonding Interactions for Enhanced Triplet-Triplet Annihilation Upconversion.

The triplet annihilator is a critical component for triplet-triplet annihilation upconversion (TTA-UC); both the photophysical properties of the annihilator and the intermolecular orientation have pivotal effects on the overall efficiency of TTA-UC. Herein, we synthesized two supramolecular annihilators A-1 and A-2 by grafting 9,10-diphenylanthracene (DPA) fragments, which have been widely used as triplet annihilators for TTA-UC, on a macrocyclic host-pillar[5]arenes. In A-1, the orientation of the two DPA units was random, while, in A-2, the two DPA units were pushed to a parallel arrangement by intramolecular hydrogen-bonding interactions. The two compounds showed very similar photophysical properties and host-guest binding affinities toward electron-deficient guests, but showed totally different TTA-UC emissions. The UC quantum yield of A-2 could be optimized to 13.7% when an alkyl ammonia chain-attaching sensitizer S-2 was used, while, for A-1, only 5.1% was achieved. Destroying the hydrogen-bonding interactions by adding MeOH to A-2 significantly decreased the UC emissions, demonstrating that the parallel orientations of the two DPA units contributed greatly to the TTA-UC emissions. These results should be beneficial for annihilator designs and provide a new promising strategy for enhancing TTA-UC emissions.

A Nonlinear Photochromic Reaction Based on Sensitizer-Free Triplet-Triplet Annihilation in a Perylene-Substituted Rhodamine Spirolactam.

Nonlinear photochromic reactions that work with weak incoherent light are important for molecular operations with high spatial resolution and multiple photofunctions based on single molecules. However, nonlinear photochromic compounds generally require complex molecular design, restricting accessibility in various fields. Herein, we report nonlinear photochromic properties in a perylene-substituted rhodamine spirolactam derivative (Rh-Pe), which is synthesized from rhodamine B in facile procedures. Direct excitation of Rh-Pe produces the triplet excited state via the charge-transfer (CT) state. The triplet excited state causes triplet-triplet annihilation to bring the generation of the intensely colored ring-open form with nonlinear behavior. Furthermore, green- and red-light-induced photochromism was achieved in Rh-Pe using triplet sensitizers, although Rh-Pe can be directly excited only by ultraviolet and blue light. Our findings are expected to contribute to the development of photofunctional materials showing nonlinear behavior and low-energy light responsivity.

A Nonlinear Photochromic Reaction Based on Sensitizer‐Free Triplet–Triplet Annihilation in a Perylene‐Substituted Rhodamine Spirolactam

AbstractNonlinear photochromic reactions that work with weak incoherent light are important for molecular operations with high spatial resolution and multiple photofunctions based on single molecules. However, nonlinear photochromic compounds generally require complex molecular design, restricting accessibility in various fields. Herein, we report nonlinear photochromic properties in a perylene‐substituted rhodamine spirolactam derivative (Rh−Pe), which is synthesized from rhodamine B in facile procedures. Direct excitation of Rh−Pe produces the triplet excited state via the charge‐transfer (CT) state. The triplet excited state causes triplet–triplet annihilation to bring the generation of the intensely colored ring‐open form with nonlinear behavior. Furthermore, green‐ and red‐light‐induced photochromism was achieved in Rh−Pe using triplet sensitizers, although Rh−Pe can be directly excited only by ultraviolet and blue light. Our findings are expected to contribute to the development of photofunctional materials showing nonlinear behavior and low‐energy light responsivity.

Deep Learning Prediction of Triplet-Triplet Annihilation Parameters in Blue Fluorescent Organic Light-Emitting Diodes.

The triplet-triplet annihilation (TTA) ratio and the rate coefficient (kTT) of TTA are key factors in estimating the contribution of triplet excitons to radiative singlet excitons in fluorescent TTA organic light-emitting diodes. In this study, deep learning models are implemented to predict key factors from transient electroluminescence (trEL) data using new numerical equations. A new TTA model is developed that considers both polaron and exciton dynamics, enabling the distinction between prompt and delayed singlet decays with a fundamental understanding of the mechanism. In addition, deep learning models for predicting the kinetic coefficients and TTA ratio are established. After comprehensive optimization inspired by photophysics, determination coefficient values of 0.992 and 0.999 are achieved in the prediction of kTT and TTA ratio, respectively, indicating a nearly perfect prediction. The contribution of each kinetic parameter of polaron and exciton dynamics to the trEL curve is discussed using various deep-learning models.

Sensitized Triplet-Triplet Annihilation in Nanostructured Polymeric Scintillators Allows for Pulse Shape Discrimination.

Scintillating materials emit light when exposed to ionizing radiation or particles and are used for the detection of nuclear threats, medical imaging, high-energy physics, and other usages. For some of these applications, it is vital to distinguish neutrons and charged particles from γ-rays. This is achievable by pulse shape discrimination (PSD), a time-gated technique, which exploits that the scintillation kinetics can depend on the nature of the incident radiation. However, it proves difficult to realize efficient PSD with plastic scintillators, which have several advantages over liquid or crystalline scintillating materials, including mechanical robustness and shapeability. It is shown here that sensitive and rapid PSD is possible with nanostructured polymer scintillators that consist of a solid polymer matrix and liquid nanodomains in which an organic dye capable of triplet-triplet annihilation (TTA) is dissolved. The liquid nature of the nanodomains renders TTA highly efficient so that delayed fluorescence can occur at low energy density. The nanostructured polymer scintillators allow discriminating α particles, neutrons, and γ-rays with a time response that is better than that of commercial scintillators. Exploiting that the liquid nanodomains can facilitate energy transfer processes otherwise difficult to realize in solid polymers, an auxiliary triplet sensitizer is incorporated. This approach further increases the scintillator's sensitivity toward α particles and neutrons and other high-energy processes where localized interactions are involved.

9-Borafluoren-9-yl and diphenylboron tetracoordinate complexes of 8-quinolinolato ligands with heavy-atoms substituents: Synthesis, fluorescence and application in OLED devices

This work describes the synthesis and characterisation of new tetrahedral boron complexes, incorporating bromine- or iodine-substituted 8-quinolinolato chelate chromophores connected to 9-borafluoren-9-yl or diphenylboron orthogonal fragments. The molecular features and photophysical properties of these complexes are analysed in both solution and solid state. Steady-state photophysical studies reveal photoluminescence quantum yields (Φf) ranging from 0.02 to 0.15 and prompt fluorescence (PF) lifetimes (τf) between 2 and 16 ns. Time-resolved photophysical experiments show the presence of delayed fluorescence (DF) and phosphorescence at both 77 K and room temperature. The DF intensity increases with a rise in temperature. This variation is ascribed to an enhancement in the intersystem crossing (ISC) process promoted by the bromine or iodine heavy-atom effect. Investigations into the dependence of DF intensity relative to the excitation dose indicate emissions stemming either from Triplet-Triplet Annihilation (TTA), Thermally Activated Delayed Fluorescence (TADF), or a combination of these competing mechanisms. The effect is related to the size and number of heavy-atom substituents in each boron complex. A study of the DF emission intensity as a function of the excitation dose reveals that diiodo-substituted 8-quinolinolato boron complexes, whether rigid or flexible, display TADF emission. Rigid 5,7-dibromo- and 5-chloro-7-iodo-substituted 8-quinolinolato complexes exhibit a combined TADF-TTA mechanism, whereas the other complexes predominantly demonstrate pure TTA emission. DFT and TDDFT calculations showed that the ground state structures reproduced the experimental geometries and only small increases in bond lengths were observed in the excited state geometries. The low energy absorption bands displayed mainly intra-ligand π→π* (8-quinolinato) character. The fluorescence emission energies were well reproduced, while the singlet-triplet energy gaps were relatively high and spin-orbit coupling was relevant for complexes with heavy-atoms. Ultimately, organic light-emitting diodes (OLEDs) are fabricated using the most luminescent boron complexes. The best OLED is obtained when using complex 3a, which displays green electroluminescence (EL) (λEL = 502 nm) with maximum external quantum efficiency (EQEmax) of 2.5% and maximum luminance (Lmax) of 2200 cd m−2.