Triplet Exciton Formation Research Articles

Efficient Electroluminescence from Organic Fluorophore-Containing Perovskite Films.

Two-dimensional perovskites containing an organic fluorophore can be a unique emitter for light-emitting diodes (LEDs). However, external quantum efficiencies (EQEs) of fluorophore-containing perovskite LEDs reported thus far are still very low. In this study, these are able to boost the EQE to ≈10% by choosing an organic fluorophore with appropriate energy levels for the perovskite structure organization. In the fluorophore-containing perovskite LEDs, carrier transport and exciton formation take place in the perovskite's metal halide framework, thereby avoiding the direct formation of nonradiative triplet excitons on the organic fluorophores. Subsequently, the bright triplet excitons formed in the metal halide framework are transferred to form the radiative singlet states of the organic fluorophores, leading to efficient electroluminescence (EL) from the organic fluorophores regularly dispersed inside the perovskite structure. Unexpectedly higher light-outcoupling efficiency, which is caused by the light scattering in the polycrystalline perovskite layer, will be another reason for efficient EL. These findings will contribute toward the fabrication of LED-based products with high performance at a low cost.

Highly efficient organic solar cells enabled by suppressing triplet exciton formation and non-radiative recombination

The high non-radiative energy loss is a bottleneck issue that impedes the improvement of organic solar cells. The formation of triplet exciton is thought to be the main source of the large non-radiative energy loss. Decreasing the rate of back charge transfer is considered as an effective approach to alleviate the relaxation of the charge-transfer state and the triplet exciton generation. Herein, we develops an efficient ternary system based on D18:N3-BO:F-BTA3 by regulating the charge-transfer state disorder and the rate of back charge transfer of the blend. With the addition of F-BTA3, a well-defined morphology with a more condensed molecular packing is obtained. Moreover, a reduced charge-transfer state disorder is demonstrated in the ternary blend, which decreases the rate of back charge transfer as well as the triplet exciton formation, and therefore hinders the non-radiative recombination pathways. Consequently, D18:N3-BO:F-BTA3-based device produces a low non-radiative energy loss of 0.183 eV and a record-high efficiency of 20.25%. This work not only points towards the significant role of the charge-transfer state disorder on the suppression of triplet exciton formation and the non-radiative energy loss, but also provides a valuable insight for enhancing the performance of OSCs.

Fast Transfer of Triplet to Doublet Excitons from Organometallic Host to Organic Radical Semiconductors.

Spin triplet exciton formation sets limits on technologies using organic semiconductors that are confined to singlet-triplet photophysics. In contrast, excitations in the spin doublet manifold in organic radical semiconductors can show efficient luminescence. Here the dynamics of the spin allowed process of intermolecular energy transfer from triplet to doublet excitons are explored. A carbene-metal-amide (CMA-CF3) is employed as a model triplet donor host, since following photoexcitation it undergoes extremely fast intersystem crossing to generate a population of triplet excitons within 4ps. This enables a foundational study for tracking energy transfer from triplets to a model radical semiconductor, TTM-3PCz. Over 74% of all radical luminescence originates from the triplet channel in this system under photoexcitation. It is found that intermolecular triplet-to-doublet energy transfer can occur directly and rapidly, with 12% of triplet excitons transferring already on sub-ns timescales. This enhanced triplet harvesting mechanism is utilized in efficient near-infrared organic light-emitting diodes, which can be extended to other opto-electronic and -spintronic technologies by radical-based spin control in molecular semiconductors.

Frontispiece: Ambient Phosphor with High Efficiency and Long Lifetime in Poly(Methyl Methacrylate) Through Charge‐Transfer‐Mediated Triplet Exciton Formation for Photolithography Applications

Frontispiece: Ambient Phosphor with High Efficiency and Long Lifetime in Poly(Methyl Methacrylate) Through Charge‐Transfer‐Mediated Triplet Exciton Formation for Photolithography Applications

Frontispiz: Ambient Phosphor with High Efficiency and Long Lifetime in Poly(Methyl Methacrylate) Through Charge‐Transfer‐Mediated Triplet Exciton Formation for Photolithography Applications

Frontispiz: Ambient Phosphor with High Efficiency and Long Lifetime in Poly(Methyl Methacrylate) Through Charge‐Transfer‐Mediated Triplet Exciton Formation for Photolithography Applications

Ambient Phosphor with High Efficiency and Long Lifetime in Poly(Methyl Methacrylate) Through Charge-Transfer-Mediated Triplet Exciton Formation for Photolithography Applications.

Currently, purely organic compounds showing ambient phosphorescence with high efficiency (ΦP ) and ultra-long lifetime (τP ) are quite rare and often need to be achieved in hydrophilic poly(vinyl alcohol)-based hosts. This severely limits their applications. Here, we provide a solution to this issue by constructing an ortho-linked donor-acceptor (D-A) dyad whose D moiety has not only a long-lived T1 state to achieve a long τP , but also a Tn state that is close to the S1 state of the dyad to trigger effective spin-orbit charge transfer intersystem crossing (SOCT-ISC). The rationality of this strategy was validated by a new phosphor OF-BCz that is able to show a τP of 1.92 s and a ΦP of 30 % even in a less rigid matrix of poly(methyl methacrylate) (PMMA). Excitingly, OF-BCz exhibited its potential as both a photocuring initiator and an in situ quality indicator, allowing for the visual detection of defects in photolithographic patterning.

Ambient Phosphor with High Efficiency and Long Lifetime in Poly(Methyl Methacrylate) Through Charge‐Transfer‐Mediated Triplet Exciton Formation for Photolithography Applications

AbstractCurrently, purely organic compounds showing ambient phosphorescence with high efficiency (ΦP) and ultra‐long lifetime (τP) are quite rare and often need to be achieved in hydrophilic poly(vinyl alcohol)‐based hosts. This severely limits their applications. Here, we provide a solution to this issue by constructing an ortho‐linked donor‐acceptor (D−A) dyad whose D moiety has not only a long‐lived T1 state to achieve a long τP, but also a Tn state that is close to the S1 state of the dyad to trigger effective spin‐orbit charge transfer intersystem crossing (SOCT‐ISC). The rationality of this strategy was validated by a new phosphor OF‐BCz that is able to show a τP of 1.92 s and a ΦP of 30 % even in a less rigid matrix of poly(methyl methacrylate) (PMMA). Excitingly, OF‐BCz exhibited its potential as both a photocuring initiator and an in situ quality indicator, allowing for the visual detection of defects in photolithographic patterning.

Singlet-Triplet Energy Inversion in Carbon Nitride Photocatalysts.

Time-resolved EPR (TR-EPR) demonstrates the formation of well-defined spin triplet excitons in carbon nitride. This permits to experimentally probe the extent of the triplet wavefunction which delocalizes over several tri-s-triazine units. Analysis of the temperature dependence of the TR-EPR signal reveals the mobility of the triplet excitons. By employing monochromatic light excitation in the range 430-600 nm, the energy of the spin triplet is estimated to be ≈0.2 eV above the conduction band edge, proving that the triplet exciton lies above the corresponding singlet. Comparison between amorphous and graphitic forms establishes the singlet-triplet inversion as a general feature of carbon nitride materials.

Optimization of ITO/V2O5/Alq3/TPBi/BPhen/LiF/Al Layers Configuration for OLED and Study of Its Optical and Electrical Characteristics

Nowadays, OLEDs have shown aesthetic potential in smart cards, sensor displays, other electronic devices, sensitive medical devices and signal monitoring etc. due to their wide range of applications like low power consumption, high contrast ratio, speed highly electroluminescent, wide viewing angle and fast response time. In this paper, a highly efficient organic LED ITO/V2O5/Alq3/TPBi/BPhen/LiF/Al with low turn-on voltage and high optically efficiency is presented including electrical and optical characteristics. The simulation of electrical characteristics like current versus applied voltage, current density versus applied voltage, recombination prefactor versus excess carrier density characteristics and optical characteristics like light flux versus current density, light flux versus applied voltage and optical efficiency versus applied voltage has been explained. The physical design, working principle and thickness of different layers along with the process of formation of singlet and triplet excitons are discussed in detail. Here double electron transport layer (ETL), cathode layers are used to enhance the electrical and optical efficiency of OLED. The operating voltage is found to be ~ 3.2 V for the ITO/V2O5/Alq3/TPBi/BPhen/LiF/Al heterostructure based OLED. The designed organic LED has achieved the maximum optical efficiency at 3 V.

Efficient Intramolecular Singlet Fission in Spiro-Linked Heterodimers.

We investigate intramolecular singlet fission (iSF) of spiro-linked azaacene heterodimers by time-resolved spectroscopy and quantum chemical calculations. Combining two different azaacenes through a nonconjugated linker using condensation chemistry furnishes azaacene heterodimers. Compared to their homodimers, iSF quantum yields are improved at an extended absorption range. The driving force of iSF, the energy difference ΔEiSF between the S1 state and the correlated triplet pair 1(TT), is tuned by the nature of the heterodimers. iSF is exothermic in all of the herein studied molecules. The overall quantum yield for triplet exciton formation reaches approximately 174%. This novel concept exploits large energy differences between singlet electronic states in combination with spatially fixed chromophores, which achieves efficient heterogeneous iSF, if the through-space interaction between the chromophores is minimal.

The Mechanism of the Photodimerization of [60]Fullerene Derivatives: It is Still a Charge Separation Followed by a Back Transfer!

AbstractHerein, we present a systematic study of the photochemical behavior of a set of fullerene compounds bearing various organic addends attached to the fullerene cage. It has been shown that the yield of photodimerization products strongly depends on the structure and electronic properties of the material, primarily the electron affinity (acceptor strength) of the modified fullerene core. This finding being inconsistent with the conventional [2+2]cycloaddition mechanism and pointed to an alternative pathway. This proposed pathway involves photoinduced charge separation followed by back charge transfer events leading to the efficient generation of triplet excitons, which are responsible for the formation of dimerized species. The light‐induced charge separation pathway was confirmed by electron spin resonance spectroscopy and was supported by theoretical calculations. The revealed mechanism allows one to control the photochemical behavior of the fullerene derivatives via rational structural engineering: some of the compounds were shown to be fully resistant to photodimerization, which makes them promising candidates in the development of stable organic photovoltaics. Furthermore, this approach could be used to suppress back charge transfer in donor‐acceptor blends and hinder the formation of triplet excitons which represents one a major energy loss channel in the current generation of organic solar cells.

Charge Separation from Triplet Excited States in Nonfullerene Acceptor‐Based Organic Solar Cells

Suppressing charge recombination is pivotal for further improving the power conversion efficiency of organic solar cells (OSCs). The bimolecular recombination of free charge carriers leads to the formation of both singlet and triplet charge transfer (CT) states at a ratio of 1:3 when considering simple spin statistics, meaning that charge recombination via the triplet excited state is the main deactivation channel for OSCs. Although the formation of local triplet excitons through back charge transfer from triplet CT states is thought to be a terminal loss process, it is shown that charge separation from triplet excitons can occur in nonfullerene acceptor (NFA)‐based OSCs. To reveal the triplet exciton dynamics, a triplet sensitizer PtTPBP is doped into an OSC consisting of PM6 and Y6 as an electron donor and acceptor, respectively. Upon photoexcitation of PtTPBP, triplet excitons are formed, which subsequently transfer their energy to Y6, resulting in Y6 triplet excitons formation. Based on transient absorption and external quantum efficiency measurements, clear experimental evidence of charge photogeneration from Y6 triplet excitons at the PM6:Y6 interface is provided. This study highlights the importance of minimizing the energy difference between the singlet and triplet excited states of NFAs to suppress charge recombination.

Theoretical studies of new iridium-based terpolymer donors for high-efficiency triplet-material-based organic photovoltaics: Incorporation of different iridium(III) complexes

Screening potential terpolymer donors for high-performance triplet-material-based organic photovoltaics (T-OPVs) has been a challenge. Herein, four terpolymer donors, with different bis-tridentate iridium(III) complexes incorporated into the backbone of PTB7Ir, were designed and investigated by DFT and TD-DFT methods. The results show that, for designed 1–4 molecules, the bis-tridentate architecture in iridium complexes contributes to the formation of the orbital transitions involving iridium atoms, and promotes the enhancement of spin-orbit coupling (SOC) in heavy metals. Based on the efficient exciton transformation channel from the lowest singlet (S1) state to the third triplet (T3) state, the designed 1–3 have smaller energy differences (ΔES1−T3) and larger SOC matrix elements (⟨S1|HSOC|T3⟩) between S1 and T3, resulting in the faster intersystem crossing (ISC) and triplet exciton formation. Furthermore, 1–3/PC71BM heterojunctions with –ΔGCRT<−0.1 eV (–ΔGCRT refers to the driving force of triplet charge recombination) could exhibit suppressed triplet charge recombination (CRT) processes. The calculation results suggest that designed 1–3 systems can present enhanced inter-facial charge transfer and photovoltaic performance, and become promising candidates for iridium-based terpolymer donors in T-OPVs. This work will provide valuable guidance for the molecular design of T-OPV terpolymer donors.

Internal electric fields control triplet formation in halide perovskite-sensitized photon upconverters

Halide perovskite-based photon upconverters utilize perovskite thin films to sensitize triplet exciton formation in a small-molecule layer, driving triplet-triplet annihilation upconversion. Despite having excellent carrier mobility, these systems suffer from inefficient triplet formation at the perovskite/annihilator interface. We studied triplet formation in formamidinium-methylammonium lead iodide/rubrene bilayers using photoluminescence and surface photovoltage methods. By studying systems constructed on glass as well as hole-selective substrates, comprising self-assembled layers of the carbazole derivative 2PACz ([2-(9H-carbazol-9-yl)ethyl]phosphonic acid) on indium-doped tin oxide, we saw how changes in the carrier dynamics induced by the hole-selective substrate perturbed triplet formation at the perovskite/rubrene interface. We propose that an internal electric field, caused by hole transfer at the perovskite/rubrene interface, strongly affects triplet exciton formation, accelerating exciton-forming electron-hole encounters at the interface but also limiting thehole density in rubrene at high excitation densities. Controlling this field is a promising path to improving triplet formation in perovskite/annihilator upconverters.

Near-infrared absorbing acceptor with suppressed triplet exciton generation enabling high performance tandem organic solar cells

Reducing the energy loss of sub-cells is critical for high performance tandem organic solar cells, while it is limited by the severe non-radiative voltage loss via the formation of non-emissive triplet excitons. Herein, we develop an ultra-narrow bandgap acceptor BTPSeV-4F through replacement of terminal thiophene by selenophene in the central fused ring of BTPSV-4F, for constructing efficient tandem organic solar cells. The selenophene substitution further decrease the optical bandgap of BTPSV-4F to 1.17 eV and suppress the formation of triplet exciton in the BTPSV-4F-based devices. The organic solar cells with BTPSeV-4F as acceptor demonstrate a higher power conversion efficiency of 14.2% with a record high short-circuit current density of 30.1 mA cm−2 and low energy loss of 0.55 eV benefitted from the low non-radiative energy loss due to the suppression of triplet exciton formation. We also develop a high-performance medium bandgap acceptor O1-Br for front cells. By integrating the PM6:O1-Br based front cells with the PTB7-Th:BTPSeV-4F based rear cells, the tandem organic solar cell demonstrates a power conversion efficiency of 19%. The results indicate that the suppression of triplet excitons formation in the near-infrared-absorbing acceptor by molecular design is an effective way to improve the photovoltaic performance of the tandem organic solar cells.

Mechanism of Ultrafast Triplet Exciton Formation in Single Cocrystals of π-Stacked Electron Donors and Acceptors.

Ultrafast triplet formation in donor-acceptor (D-A) systems typically occurs by spin-orbit charge-transfer intersystem crossing (SOCT-ISC), which requires a significant orbital angular momentum change and is thus usually observed when the adjacent π systems of D and A are orthogonal; however, the results presented here show that subnanosecond triplet formation occurs in a series of D-A cocrystals that form one-dimensional cofacial π stacks. Using ultrafast transient absorption microscopy, photoexcitation of D-A single cocrystals, where D is coronene (Cor) or pyrene (Pyr) and A is N,N-bis(3'-pentyl)-perylene-3,4:9,10-bis(dicarboximide) (C5PDI) or naphthalene-1,4:5,8-tetracarboxydianhydride (NDA), results in formation of the charge transfer (CT) excitons Cor•+-C5PDI•-, Pyr•+-C5PDI•-, Cor•+-NDA•-, and Pyr•+-NDA•- in <300 fs, while triplet exciton formation occurs in τ = 125, 106, 484, and 958 ps, respectively. TDDFT calculations show that the SOCT-ISC rates correlate with charge delocalization in the CT exciton state. In addition, time-resolved EPR spectroscopy shows that Cor•+-C5PDI•- and Pyr•+-C5PDI•- recombine to form localized 3*C5PDI excitons with zero-field splittings of |D| = 1170 and 1250 MHz, respectively. In contrast, Cor•+-NDA•- and Pyr•+-NDA•- give triplet excitons in which |D| is only 1240 and 690 MHz, respectively, compared to that of NDA (2091 MHz), which is the lowest energy localized triplet exciton, indicating that the Cor-NDA and Pyr-NDA triplet excitons have significant CT character. These results show that charge delocalization in CT excitons impacts both ultrafast triplet formation as well as the CT character of the resultant triplet states.

Nanomorphology dependence of the environmental stability of organic solar cells

Previous studies have reported contradictory effects of small-molecule acceptors on the environmental stability of polymer:small-molecule blends, with one showing that a small-molecule acceptor stabilizes and another showing that it destabilizes the polymer donor. In this work, to investigate the origin of these contradictory results, the effects of the nanomorphologies of small-molecule acceptors on the environmental stability of polymer:small-molecule blends are demonstrated. Investigations on the environmental stabilities of polymer:fullerene blends of poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]] (PTB7):phenyl-C61-butyric acid methyl ester (PCBM) with contrasting nanomorphologies of PCBM reveal that dispersed PCBM in a mixed phase is the critical factor that causes triplet-mediated singlet oxygen generation and, hence, the severe photooxidation of PTB7, whereas an aggregated PCBM phase stabilizes PTB7 by reducing the formation of PTB7 triplet excitons. In addition, the photooxidation of PTB7 substantially degrades hole transport in the PTB7:PCBM blends by destroying the crystalline PTB7 phases within the films; this effect is strongly correlated with the efficiency losses of the PTB7:PCBM organic solar cells. These conclusions are also extended to polymer:nonfullerene blends of PTB7:ITIC and PTB7:Y6, thereby confirming the generality of this phenomenon for polymer:small-molecule organic solar cells.

Comparative Study of Exciton Dynamics in 9,9′-Bianthracene Nanoaggregates and Thin Films: Observation of Singlet–Singlet Annihilation-Mediated Triplet Exciton Formation

Comparative Study of Exciton Dynamics in 9,9′-Bianthracene Nanoaggregates and Thin Films: Observation of Singlet–Singlet Annihilation-Mediated Triplet Exciton Formation

Geminate and Nongeminate Pathways for Triplet Exciton Formation in Organic Solar Cells

AbstractOrganic solar cells (OSCs) have recently shown a rapid improvement in their performance, bringing power conversion efficiencies to above 18%. However, the open‐circuit voltage of OSCs remains low relative to their optical gap and this currently limits efficiency. Recombination to spin‐triplet excitons is a key contributing factor, and is widely, but not universally, observed in donor–acceptor blends using both fullerene and nonfullerenes as electron acceptors. Here, an experimental framework that combines time‐resolved optical and magnetic resonance spectroscopies to detect triplet excitons and identify their formation mechanisms, is reported. The methodology is applied to two well‐studied polymer:fullerene systems, PM6:PC60BM and PTB7‐Th:PC60BM. In contrast to the more efficient nonfullerene acceptor systems that show only triplet states formed via nongeminate recombination, the fullerene systems also show significant triplet formation via geminate processes. This requires that geminate electron–hole pairs be trapped long enough to allow intersystem crossing. It is proposed that this is a general feature of fullerene acceptor systems, where isolated fullerenes are known to intercalate within the alkyl sidechains of the donor polymers. Thus, the study demonstrates that engineering good donor and acceptor domain purity is key for suppressing losses via triplet excitons in OSCs.

Molecular design for organic luminogens with efficient emission in solution and solid-state

Design and synthesis of organic luminogens with efficient emission in both solution and solid-state (namely, dual-state emission: DSE) still face enormous challenges, a majority of luminescent compounds are always either aggregation-caused quenching or aggregation-induced emission luminogens. The development of dual-state emissive materials is extremely desirable for advanced applications. However, up to now, how to design this kind of materials remains a big challenge. Thus, a further in-depth understanding of the dual-state emission still needs to be established. In this work, a rational molecular design strategy has been presented based on triphenylamine via theoretical calculation and practical verification. First, steric hindrance effect of triphenylamine molecule can render the intramolecular rotation restricted in solution state, which could reduce the non-radiative transition; second, the twisted structure prevents or alleviates detrimental close molecular packing in the solid state; third, rational chemical modification forbids or inhibits the Sn – Tn intersystem crossing, which prevents the formation of triplet excitons and decrease the non-radiative transition rate. Once the above conditions are satisfied, the triphenylamine derivatives can exhibit bright emission in both solution and solid-state. This efficient strategy has been strongly confirmed by TPA-BP, TPA-BT, TPA-BBT and several molecules previously reported. We believe that this work will help to design novel luminescent materials with efficient emission in both solution and solid-state, which is of benefit to organic light-emitting diodes (OLEDs), chemical sensors, smart optoelectronic materials, and other high-tech areas.