Triplet Excited State Research Articles

Modeling Novel Aqueous Particle and Cloud Chemistry Processes of Biomass Burning Phenols and Their Potential to Form Secondary Organic Aerosols.

Phenols emitted from biomass burning contribute significantly to secondary organic aerosol (SOA) formation through the partitioning of semivolatile products formed from gas-phase chemistry and multiphase chemistry in aerosol liquid water and clouds. The aqueous-phase SOA (aqSOA) formed via hydroxyl radical (•OH), singlet molecular oxygen (1O2*), and triplet excited states of organic compounds (3C*), which oxidize dissolved phenols in the aqueous phase, might play a significant role in the evolution of organic aerosol (OA). However, a quantitative and predictive understanding of aqSOA has been challenging. Here, we develop a stand-alone box model to investigate the formation of SOA from gas-phase •OH chemistry and aqSOA formed by the dissolution of phenols followed by their aqueous-phase reactions with •OH, 1O2*, and 3C* in cloud droplets and aerosol liquid water. We investigate four phenolic compounds, i.e., phenol, guaiacol, syringol, and guaiacyl acetone (GA), which represent some of the key potential sources of aqSOA from biomass burning in clouds. For the same initial precursor organic gas that dissolves in aerosol/cloud liquid water and subsequently reacts with aqueous phase oxidants, we predict that the aqSOA formation potential (defined as aqSOA formed per unit dissolved organic gas concentration) of these phenols is higher than that of isoprene-epoxydiol (IEPOX), a well-known aqSOA precursor. Cloud droplets can dissolve a broader range of soluble phenols compared to aqueous aerosols, since the liquid water contents of aerosols are orders of magnitude smaller than cloud droplets. Our simulations suggest that highly soluble and reactive multifunctional phenols like GA would predominantly undergo cloud chemistry within cloud layers, while gas-phase chemistry is likely to be more important for less soluble phenols. But in the absence of clouds, the condensation of low-volatility products from gas-phase oxidation followed by their reversible partitioning to organic aerosols dominates SOA formation, while the SOA formed through aqueous aerosol chemistry increases with relative humidity (RH), approaching 40% of the sum of gas and aqueous aerosol chemistry at 95% RH for GA. Our model developments of biomass-burning phenols and their aqueous chemistry can be readily implemented in regional and global atmospheric chemistry models to investigate the aqueous aerosol and cloud chemistry of biomass-burning organic gases in the atmosphere.

Incorporation of deuterated coronene into cage-like sodalite-type porous organic salts and improvement of room-temperature phosphorescence properties

Abstract Host materials with external heavy atom effects do not change the chemical structures of incorporated luminescent molecules but promote intersystem crossing from the excited singlet state to the excited triplet state, which induces room-temperature phosphorescence (RTP). The deuteration of luminescent molecules suppresses non-radiative deactivation via C–H stretching vibration; therefore, the improvement of both phosphorescence lifetime and quantum efficiency (i.e. isotope effect) is expected. Although a combination of the external heavy atom effect and isotope effect could be expected to improve phosphorescent performances dramatically, an environment with a strong external heavy atom effect (density of iodine atoms ≥0.65 gcm−3) increases non-radiative deactivation via spin-orbit coupling; therefore, the isotope effect is hindered, and the phosphorescent lifetime and quantum efficiency are not usually improved. In the current work, we constructed cage-like sodalite-type porous organic salts (s-POSs) where the density of iodine atoms (0.55 gcm−3) was moderate (0.13 ̶ 0.65 gcm−3). Incorporation of a deuterated representative luminescent molecule such as coronene (coronene-d12) into s-POSs enabled the exerting of both the external heavy atom effect and isotope effect, which successfully improved both RTP lifetime (1.1 times) and quantum efficiency (1.6 times) over those of an incorporated ordinary coronene (coronene-h12).

Photo-production of excited triplet-state of dissolved organic matters in inland freshwater and coastal seawater

The excited triplet-state of dissolved organic matter (3DOM*) is a major reactive intermediate in sunlit waters. Its quantum yield is important in understanding the fate of organic micropollutants. The degradation efficiency of its chemical probe, 2,4,6-trimeythlphenol (fTMP), is generally used as a proxy of the quantum yield. However, fTMP has been described and modelled only for freshwater systems. Therefore, this study quantified fTMP in inland freshwater and coastal seawater sampled in Japan by conducting steady-state photochemical experiments. Optical properties of water were then used to model fTMP. Results indicated that the inland freshwater DOM originated mainly from terrestrial sources, while the coastal seawater DOM were microbial-dominated. On average, inland freshwater exhibited lower fTMP (61.2 M−1) than coastal seawater (79.7 M−1) and the coastal seawater exhibited significant variations in the proportion of high-energy 3DOM* (> 250 kJ/mol). In addition, E2:E3 (ratio of absorbance at 254 to 365 nm) was positively correlated with fTMP of inland freshwater, coastal seawater, and the overall dataset. Catchment conditions such as forest coverage also influenced the production of 3DOM* and high-energy 3DOM* in inland freshwater. Furthermore, the developed models estimated fTMP based on the optical properties of both freshwater and seawater, providing valuable insights about 3DOM* photochemistry in the aquatic environment.

Exploring the Early Time Behavior of the Excited States of an Archetype Thermally Activated Delayed Fluorescence Molecule.

Optical pump-probe techniques allow for an in-depth study of dark excited states. Here, we utilize them to map and gain insights into the excited states involved in the thermally activated delayed fluorescence (TADF) mechanism of a benchmark TADF emitter DMAC-TRZ. The results identify different electronic excited states involved in the key TADF transitions and their nature by combining pump-probe and photoluminescence measurements. The photoinduced absorption signals are highly dependent on polarity, affecting the transition oscillator strength but not their relative energy positions. In methylcyclohexane, a strong and vibronically structured local triplet excited state absorption (3LE → 3LEn) is observed, which is quenched in higher polarity solvents as 3CT becomes the lowest triplet state. Furthermore, ultrafast transient absorption (fsTA) confirms the presence of two stable conformers of DMAC-TRZ: (1) quasi-axial (QA) interconverting within 20 ps into (2) quasi-equatorial (QE) in the excited state. Moreover, fsTA highlights how sensitive excited state couplings are to the environment and the molecular conformation.

Solvent and alkyl substitution effects on charge-transfer mediated triplet state generation in BODIPY dyads: a combined computational and experimental study

Donor–acceptor dyads based on BODIPYs have been recently employed to enhance the formation of triplet excited states with the process of spin–orbit charge transfer intersystem crossing (SOCT-ISC) which does not require introduction of transition metals or other heavy atoms into the molecule. In this work we compare two donor–acceptor dyads based on meso-naphthalenyl BODIPY by combining experimental and computational investigations. The photophysical and electrochemical characterization reveals a significant effect of alkylation of the BODIPY core, disfavoring the SOCT-ISC mechanism for the ethylated BODIPY dyad. This is complemented with a computational investigation carried out to rationalize the influence of ethyl substituents and solvent effects on the electronic structure and efficiency of triplet state population via charge recombination (CR) from the photoinduced electron transfer (PeT) generated charge-transfer (CT) state. Time dependent-density functional theory (TD-DFT) calculations including solvent effects and spin–orbit coupling (SOC) calculations uncover the combined role played by solvent and alkyl substitution on the lateral positions of BODIPY.Graphical abstract

Mechanistic Aspects of Photodegradation of Deoxynucleosides Induced by Triplet State of Effluent Organic Matter.

Excited triplet states of wastewater effluent organic matter (3EfOM*) are known as important photo-oxidants in the degradation of extracellular antibiotic resistance genes (eArGs) in sunlit waters. In this work, we further found that 3EfOM* showed highly selective reactivity toward 2'-deoxyguanosine (dG) sites within eArGs in irradiated EfOM solutions at pH 7.0, while it showed no photosensitizing capacity toward 2'-deoxyadenosine, 2'-deoxythymidine, and 2'-deoxycytidine (the basic structures of eArGs). The 3EfOM* contributed to the photooxidation of dG primarily via one-electron transfer mechanism, with second-order reaction rate constants of (1.58-1.74) × 108 M-1 s-1, forming the oxidation intermediates of dG (dG(-H)•). The formed dG(-H)• could play a significant role in hole hopping and damage throughout eArGs. Using the four deoxynucleosides as probes, the upper limit for the reduction potential of 3EfOM* is estimated to be between 1.47 and 1.94 VNHE. Compared to EfOM, the role of the triplet state of terrestrially natural organic matter (3NOM*) in dG photooxidation was minor (∼15%) mainly due to the rapid reverse reactions of dG(-H)• by the antioxidant moieties of NOM. This study advances our understanding of the difference in the photosensitizing capacity and electron donating capacity between NOM and EfOM and the photodegradation mechanism of eArGs induced by 3EfOM*.

Elucidating the inhibitory effects of natural organic matter on the photodegradation of organic micropollutants: Atrazine as a probe compound

Natural organic matter (NOM) is a complex mixture of heterogeneous compounds with varying functional groups and molecular sizes. Understanding the impact of NOM on the generation of photochemically produced reactive intermediates (PPRIs) and their potential inhibitory effects on photolysis has remained challenging due to the variations in the reactivities and concentrations of these functional groups. To address this gap, tannic acid (TA), gallic acid (GA), catechin (CAT), and tryptophan (Trp), were chosen as potential substitutes for NOM. Their effects on the photochemical transformation process were evaluated and compared with the widely used Suwannee River NOM (SRNOM). Atrazine (ATZ) was selected as a probe organic micropollutant (OMP). In this investigation, a significantly higher concentration of HO• was observed compared to O21, and the triplet excited state ( NOM*3). The findings suggest that the substituted phenols, particularly those with carboxylate-substitutions, played a substantial role in HO• formation, while electron-rich moieties acted as antioxidants, consuming NOM*3. Hydroxyl, carboxylic, and amino acid were the active groups for O21 formation. However, the inhibitory effects induced by the NOM surrogates were significant and mainly attributed to the direct photolysis inhibition caused by the inner filter effect. The scope of this work was further extended to include SRNOM, where similar trends with less pronounced formation of PPRIs and inner filter effects were observed. Therefore, this study sheds some light on the role of the functional groups in NOM during photochemical transformations of OMPs, thereby deepening our understanding of their fate in aqueous systems.

Excited state properties of 5-fluoro-4-thiouridine derivative†.

The excited state properties of thionated 5-fluorouridine (2',3',5'-tri-O-acetyl-5-fluoro-4-thiouridine; ta5F4TUrd), synthesized with Lawesson's reagent, have been intensively investigated with nanosecond transient absorption spectroscopy, time-resolved thermal lensing, near-infrared emission, and quantum chemical calculation. The intrinsic triplet lifetime of ta5F4TUrd was determined to be μs in acetonitrile, and the formation quantum yield of the excited triplet state was as large as . The quenching rate constants of the triplet ta5F4TUrd by the dissolved oxygen molecule and by the self-quenching process were found to be nearly equal to the diffusion-controlled rate of acetonitrile. The quantum yield of the singlet molecular oxygen produced through energy transfer between the triplet ta5F4TUrd and the dissolved oxygen, , was successfully determined to be under the oxygen-saturated condition. From the oxygen concentration dependence of the value, the fraction of triplet ta5F4TUrd quenched by dissolved oxygen which gives rise to the 1 O2 * formation, , was successfully obtained to be , which was the largest among the thionucleobases and the thionucleosides reported so far. This could be due to the lower energy and/or the ππ* character of the triplet state.

Symmetry-Breaking Triplet Excited State Enhances Red Afterglow Enabling Ubiquitous Afterglow Readout.

Molecular vibrations are often factors that deactivate luminescence. However, if there are molecular motion elements that enhance luminescence, it may be possible to utilize molecular movement as a design guideline to enhance luminescence. Here, the authors report a large contribution of symmetry-breaking molecular motion that enhances red persistent room-temperature phosphorescence (RTP) in donor-π-donor conjugated chromophores. The deuterated form of the donor-π-donor chromophore exhibits efficient red persistent RTP with a yield of 21% and a lifetime of 1.6s. A dynamic calculation of the phosphorescence rate constant (kp) indicates that the symmetry-breaking movement has a crucial role in selectively facilitating kp without increasing nonradiative transition from the lowest triplet excited state. Molecules exhibiting efficient red persistent RTP enable long-wavelength excitation, indicating the suitability of observing afterglow readout in a bright indoor environment with a white-light-emitting diode flashlight, greatly expanding the range of anti-counterfeiting applications that use afterglow.

Synthesis, and evaluation of photophysical properties of a potential DPP-derived photosensitizer for photodynamic therapy with D-A-D architecture

The study of a macromolecule derived from DPP and triphenylamine, (DPP-BisTPA) by computational chemistry, its synthesis by direct arylation, optical characterization (UV-Vis and fluorescence) and electrochemistry (cyclic voltammetry), as well as its evaluation as a generator of reactive oxygen species indirectly, through the degradation of uric acid. The results obtained by DFT using B3LYP/6-31G (d, p) and TD-DFT using CAM-B3LYP/6-31G (d, p) reveal values of energy levels of the first singlet and triplet excited state that indicate a possible intersystem crossover and the possible generation of reactive oxygen species by a type I mechanism. The compound presents an absorption region within the phototherapeutic window. The electrochemical bandgap is 1.64 eV which suggests a behavior as a semiconductor. DPP-BisTPa were processed as hemispherical nanoparticles with a size around 100 nm, and NPOs were evaluated as a photosensitizer with a ROS generation yield of 4% using a photodynamic therapy flashlight as the light source.Graphical

Management of triplet excitons transition: fine regulation of Förster and dexter energy transfer simultaneously

Understanding and management of triplet excitons transition in the same molecule remain a great challenge. Hence, for the first time, by host engineering, manageable transitions of triplet excitons in a naphthalimide derivative NDOH were achieved, and monitored through the intensity ratio (ITADF/IRTP) between thermally activated delayed fluorescence (TADF) and room-temperature phosphorescence (RTP). Energy differences between lowest triplet excited states of host and guest were changed from 0.03 to 0.17 eV, and ITADF/IRTP of NDOH decreased by 200 times, thus red shifting the afterglow color. It was proposed that shorter conjugation length led to larger band gaps of host materials, thus contributing to efficient Dexter and inefficient Förster energy transfer. Interestingly, no transition to singlet state and only strongest RTP with quantum yield of 13.9% could be observed, when PBNC with loosest stacking and largest band gap acted as host. This work provides novel insight for the management and prediction of triplet exciton transitions and the development of smart afterglow materials.

The Rhodamine–Perylene Compact Electron Donor–Acceptor Dyad: Spin-Orbit Charge-Transfer Intersystem Crossing and the Energy Balance of the Triplet Excited States

The Rhodamine–Perylene Compact Electron Donor–Acceptor Dyad: Spin-Orbit Charge-Transfer Intersystem Crossing and the Energy Balance of the Triplet Excited States

Measuring Intermolecular Excited State Geometry for Favorable Singlet Fission in Tetracene.

Singlet fission (SF) is the process of converting an excited singlet to a pair of excited triplets. Harvesting two charges from a single photon has the potential to increase photovoltaic device efficiencies. Acenes, such as tetracene and pentacene, are model molecules for studying SF. Despite SF being an endoergic process for tetracene and exoergic for pentacene, both acenes exhibit near unity SF quantum efficiencies, raising questions about how tetracene can overcome the energy barrier. Here, we use recently developed instrumentation to measure inelastic neutron scattering (INS) while optically exciting the model molecules using two different excitation energies. The spectroscopic results reveal intermolecular structural relaxation due to the presence of a triplet excited state. The structural dynamics of the combined excited state molecule and surrounding tetracene molecules are further studied using time-dependent density functional theory (TD-DFT), which shows that the singlet and triplet levels shift due to the excited state geometry, reducing the uphill energy barrier for SF to within kT.

Spin-Vibronic Intersystem Crossing and Molecular Packing Effects in Heavy Atom Free Organic Phosphor.

We present a detailed investigation into the excited state properties of a planar D3h symmetric azatriangulenetrione, HTANGO, which has received significant interest due to its high solid-state phosphorescence quantum yield and therefore potential as an organic room temperature phosphorescent (ORTP) dye. Using a model linear vibronic coupling Hamiltonian in combination with quantum dynamics simulations, we observe that intersystem crossing (ISC) in HTANGO occurs with a rate of ∼1010 s-1, comparable to benzophenone, an archetypal molecule for fast ISC in heavy metal free molecules. Our simulations demonstrate that the mechanism for fast ISC is associated with the high density of excited triplet states which lie in close proximity to the lowest singlet states, offering multiple channels into the triplet manifold facilitating rapid population transfer. Finally, to rationalize the solid-state emission properties, we use quantum chemistry to investigate the excited state surfaces of the HTANGO dimer, highlighting the influence and importance of the rotational alignment between the two HTANGO molecules in the solid state and how this contributes to high phosphorescence quantum yield.

Tuning Energy Transfer Pathways in Halide Perovskite-Dye Hybrids through Bandgap Engineering.

Lead halide perovskite nanocrystals, which offer rich photochemistry, have the potential to capture photons over a wide range of the visible and infrared spectrum for photocatalytic, optoelectronic, and photon conversion applications. Energy transfer from the perovskite nanocrystal to an acceptor dye in the form of a triplet or singlet state offers additional opportunities to tune the properties of the semiconductor-dye hybrid and extend excited-state lifetimes. We have now successfully established the key factors that dictate triplet energy transfer between excited CsPbI3 and surface-bound rhodamine dyes using absorption and emission spectroscopies. The pendant groups on the acceptor dyes influence surface binding to the nanocrystals, which in turn dictate the energy transfer kinetics, as well as the efficiency of energy transfer. Of the three rhodamine dyes investigated (rhodamine B, rhodamine B isothiocyanate, and rose Bengal), the CsPbI3-rose Bengal hybrid with the strongest binding showed the highest triplet energy transfer efficiency (96%) with a rate constant of 1 × 109 s-1. This triplet energy transfer rate constant is nearly 2 orders of magnitude slower than the singlet energy transfer observed for the pure-bromide CsPbBr3-rose Bengal hybrid (1.1 × 1011 s-1). Intriguingly, although the single-halide CsPbBr3 and CsPbI3 nanocrystals selectively populate singlet and triplet excited states of rose Bengal, respectively, the mixed halide perovskites were able to generate a mixture of both singlet and triplet excited states. By tuning the bromide/iodide ratio and thus bandgap energy in CsPb(Br1-xIx)3 compositions, the percentage of singlets vs triplets delivered to the acceptor dye was systematically tuned from 0 to 100%. The excited-state properties of halide perovskite-molecular hybrids discussed here provide new ways to modulate singlet and triplet energy transfer in semiconductor-molecular dye hybrids through acceptor functionalization and donor bandgap engineering.

On‐Surface Synthesis and Determination of the Open‐Shell Singlet Ground State of Tridecacene**

AbstractThe character of the electronic structure of acenes has been the subject of longstanding discussion. However, convincing experimental evidence of their open‐shell character has so far been missing. Here, we present the on‐surface synthesis of tridecacene molecules by thermal annealing of octahydrotridecacene on a Au(111) surface. We characterized the electronic structure of the tridecacene by scanning probe microscopy, which reveals the presence of an inelastic signal at 126 meV. We attribute the inelastic signal to spin excitation from the singlet diradical ground state to the triplet excited state. To rationalize the experimental findings, we carried out many‐body ab initio calculations as well as model Hamiltonians to take into account the effect of the metallic substrate. Moreover, we provide a detailed analysis of how the dynamic electron correlation and virtual charge fluctuation between the molecule and metallic surface reduces the singlet‐triplet band gap. Thus, this work provides the first experimental confirmation of the magnetic character of tridecacene.

Photosensitized isomerization of resveratrol: Evaluation of energy and electron transfer pathways

Resveratrol (3,5,4′-trihydroxystilbene, RSV) is a natural stilbene synthetized as trans-isomer in plants exposed to oxidative stress. In order to understand the mechanism involved during photosensitized degradation of trans-resveratrol, steady-state and time-resolved experiments were performed and compared with quantum-chemical calculations using density functional theory (DFT). Pterin (Ptr), a well-known photosensitizer, under UV-A radiation induces the oxidation of several biomolecules mainly through electron-transfer mechanisms.On the one hand, it was observed that trans-RSV participates in an energy-transfer pathway with Ptr triplet excited state (3Ptr*) forming 3trans-RSV*, which dissipates the energy by isomerization to cis-RSV. On the other hand, RSV neutral radical (trans-RSV(-H)•) was detected in laser flash photolysis experiments, evidencing an electron-transfer mechanism. The electron-transfer from 3Ptr* to trans-RSV is a barely feasible reaction, however, more favorable is the formation of trans-RSV(-H)• in a reaction between trans-RSV and Ptr radical cation (Ptr•+), which is produced during irradiation.The combination of experimental and theoretical approaches evidences the capability of trans-RSV to undergo energy-transfer (feasible by DFT calculations) and/or one-electron transfer pathways with 3Ptr*. These findings reveal the mechanisms involved in the interaction of trans-RSV and pterin excited states and provide information on the antioxidant action of resveratrol during photosensitized oxidation of biomolecules.

A Rational Way to Control the Triplet State Wave Function Confinement of Organic Chromophores: Effect of the Connection Sites and Spin Density Distribution-Guided Molecular Structure Design Principles in Bodipy Dimers.

To study the intersystem crossing (ISC) and the spatial confinement of the triplet excited states of organic chromophores, we prepared a series of Bodipy dimers. We found that the connection position of the two units has a significant effect on the absorption and fluorescence. Singlet oxygen quantum yields of 3.8-12.4% were observed for the dimers, which are independent of solvent polarity. Nanosecond transient absorption spectra indicate the population of long-lived triplet excited states with lifetimes (τT) of 45-454 μs. Pulsed laser-excited time-resolved electron paramagnetic resonance (TREPR) spectra show that the T1 triplet states are essentially delocalized, which is different from the case for the previously reported Bodipy dimers. The TREPR spectra of the triplet states imply that the delocalization over the whole dimer essentially depends on the electron density of the carbon atoms at the connection sites. This property may become a universal rule for controlling the T1 state confinement in multichromophore organic molecules.

B and N Co-doped carbon dots for the ratiometric fluorescence detection of riboflavin and information security with room temperature phosphorescence

Matrix-free room temperature phosphorescence (RTP) materials have generated considerable interest in sensing, anti-counterfeiting and bioimaging due to long lifetime and large Stokes shift. However, spin-forbidden transition and non-radiative transition make RTP challenging to implement. In this work, matrix-free RTP carbon dots (CDs) co-doped with boron and nitrogen were prepared through the microwave-assisted strategy. The CDs realize RTP without any protective matrix. This may be attributed to the stable and rigid structure formed during the heating polymerization process, which can protect the triplet excited state from being quenched by oxygen and water in the air environment. The fluorescence and phosphorescence emission wavelength of the as-prepared CDs were observed at 532 nm and 596 nm with the excitation wavelength of 476 nm and 514 nm, respectively, showing a long afterglow lifetime of 735.3 ms. Nitrogen doping has a crucial effect on the luminescence of RTP, and the increase of nitrogen content facilitates the n-π* transition and improve the efficiency of intersystem crossing (ISC). Importantly, the ratiometric fluorescence method for determining riboflavin has been established based on the Förster resonance energy transfer (FRET) between the CDs (Donor) and riboflavin (Acceptor), with a linear relationship in the range of 9.52–85.71 μM and the limit of detection (LOD) of 19.9 nM. Additionally, the phosphorescent property of the CDs was exploited to demonstrate the potential applications in the field of information encryption.

Excited state dynamics of Bi3+ centers in cubic Gd2O3

Photoluminescence characteristics of Gd2O3:Bi are studied in the 4.2–800 K temperature range by the time-resolved spectroscopy methods. Purely cubic structure of Gd2O3:Bi is confirmed by XRD. The luminescence of Bi3+(S6) and Bi3+(C2) centers is found to arise from the electron transitions from the emitting level of the triplet excited state of Bi3+, corresponding to the 3P1 → 1S0 transitions of the free Bi3+ ion. Relaxation processes in the triplet excited state of Bi3+ ions do not result in the population of the lowest-energy metastable level. The absence of the radiative transitions, corresponding to the 3P0 → 1S0 transitions of the free Bi3+ ion, explains the short (0.3–2.0 μs) decay time of the triplet emission of Bi3+ even at 4.2 K. The conclusion is made that the fast luminescence decay cannot be caused by the mixing of the metastable and emitting levels of the triplet excited state of Bi3+ by the magnetic field created at the Bi3+ site by the magnetically ordered Gd3+ sublattice. The electron transfer and recombination processes, resulting in the appearance of the photo- and thermally stimulated electron recombination luminescence of Bi3+(S6) and Bi3+(C2) centers under excitation in the Eexc > 4.3 eV energy region, are also discussed. The energy level positions of the Bi3+(S6) and Bi3+(C2) centers in the band gap of Gd2O3 are estimated.