Triple Bandpass Filter Research Articles

Feasibility of Remote Blood Pressure Estimation via Narrow-band Multi-wavelength Pulse Transit Time

Contact-free sensing gained much traction in the past decade. While remote monitoring of some parameters (heart rate) is approaching clinical levels of precision, others remain challenging (blood pressure). We investigated the feasibility of estimating blood pressure (BP) via pulse transit time (PTT) in a novel remote single-site manner, using a modified RGB camera. A narrow-band triple band-pass filter allowed us to measure the PTT between different skin layers, harvesting information from green and near-infrared wavelengths. The filter minimizes the inter-channel influence and band overlap, however, some overlap remains within the filter bands. We further resolve this using a color-channel model and a novel channel-separation method. Using the proposed setup and algorithm, we obtained multi-wavelength (MW) PTTs in an experiment inducing BP changes to 9 subjects. The results showed good absolute Pearson’s correlation coefficient between both MW PTT and systolic BP (R = 0.61, p = 0.08) as well as diastolic BP (R = 0.54, p = 0.05), pointing to feasibility of the proposed novel remote MW BP estimation via PTT. This was further confirmed in a leave-one-subject-out experiment, where a simple Random Forest regression model achieved mean absolute errors of 3.59 and 2.63 mmHg for systolic and diastolic BP respectively.

Semi‐circular mushroom resonator loaded substrate integrated waveguide cavity based compact triple‐band bandpass filter with high selectivity

Two cascaded semi-circular mushroom resonators (ScMRs) loaded to a circular substrate integrated waveguide (CSIW) is used to implement a triple-band bandpass filter of compact size and high selectivity with six transmission zeros (TZs). The ScMRs are coupled to each other along the linear edges of the metal patches and are loaded to the CSIW cavity. A distinctive modification in the schematic and the orientation of the loaded mushroom resonators is carried out along with the introduction of radial coupling slots into the CSIW cavity to generate the three passbands. The TM101 mode is responsible for the generation of first passband. The second and third passbands are formed due to the split odd and even modes of next higher order mode (TM201). An extracted pole is formed within the second passband that splits TM201 mode into odd and even modes. TM201 odd mode (TM201odd) and TM201 even mode (TM201even) are responsible for the generation of second and third passbands, respectively. Here, source-load coupling is employed within the proposed resonator to generate one TZ each at the lower stopband and upper stopband. Two cross-couplings of different modes between two loaded ScMRs are introduced to generate four transmission zeros (TZs) additionally to achieve high selectivity. The triple bandpass filter covering a compact volume of 0.0011 λg3 is fabricated and measured to validate the filter structure. The measured result agrees decently with the simulated one where the passband center frequencies (CFs) of first, second, and third passbands are measured at 1.9, 3.5, and 4.4 GHz with measured insertion losses of 1.5, 1.87, and 1.8 dB, respectively.

Design of Compact Coupled Resonators for Triple-Band Wireless Power Transfer

This letter suggests a design methodology for triple-band wireless power transfer (TB-WPT) filters. The proposed triple-bandpass filter (TB-PF) is designed using two complementary split-ring resonators CSRR-DGSs coupled in a back-to-back configuration, and operates at 0.6, 2.4, and 2.7 GHz. Each of the transmitter and the receiver has a size of 25 mm × 25 mm. The measured power transfer efficiencies were 96% for 0.6 GHz, 74% at 2.4 GHz, and 70% at 2.7 GHz, respectively, at a separation distance between the transmitter and receiver of 10 mm.

A Dual Function Reconfigurable Bandpass Filter for Wideband and Tri-Band Operations

A dual-functional reconfigurable filter is explored for the application in wideband and triple band pass filter. The wideband configuration is implemented by parallel combination of open stub loaded and short circuited stub loaded resonators to exhibit a passband from 2.0 GHz-6.1 GHz. Tight coupling generates transmission zeroes at the either side of passband, which enhances the selectivity. The proposed tri-band BPF offers passbands at 2.4 GHz, 3.5 GHz and 5.2 GHz where two-stepped impedance resonators (SIRs) and one uniform impedance resonator (UIR) are assembled to accomplish such behavior. The two short circuited stubs are connected to the feed line to extend the range of upper stopband. PIN diodes are effectively utilized to switch the operation from wideband to tri-band or vice versa. Detailed design guidelines are provided to design the proposed filter. The behavior of the proposed filter topology is investigated by even and odd mode analysis. The developed reconfigurable filter is fabricated and measured to verify the anticipated and simulated results. A close agreement is observed between them. The fabricated reconfigurable BPF has a very compact size, high selectivity, less insertion loss and good return loss profile.

Fully tunable filter with cross coupling and reconfigurable transmission zero

In this article, a novel coupling structure is proposed. The surface voltage and current distribution on this structure can be tuned by changing the ratio of the two capacitances so that the central frequency and coupling coefficient can be tuned. The coupling structure can also be tuned to change the sign of coupling coefficient, which is utilized to control the transmission zero of cross coupled tunable bandpass filter. A second order bandpass filter with tunable central frequency and bandwidth is designed and measured. The measurement shows that the central frequency tuning range is 0.768 to 1.512 GHz and the fractional bandwidth tuning range is 0.052 to 0.18 at 1.14 GHz. It shows that the filter can also be tuned with constant fractional bandwidth or constant absolute bandwidth. A tunable cascaded triple bandpass filter with tunable central frequency and bandwidth is designed and measured, as well. The cross‐coupled transmission zero can be configured to locate at either high side or low side of the passband by changing the coupling type of the filter topology.

Synthesis of Multiband Filters by Linear Optimization

In this article, a new synthesis method for the generation of multiband generalized Chebyshev polynomials with prescribed transmission zeros is presented. The proposed linear optimization technique is applicable to symmetric and asymmetric filter responses. To demonstrate its general application, the technique has been applied to the direct synthesis of dual-and triple-bandpass filters. A 7th degree dual-band prototype and a 10th degree triple-band prototype, synthesized using the proposed technique, have been fabricated and tested to validate the practicality of the method.

Labyrinth double split open loop resonator based bandpass filter design for S, C and X-band application

Nested circular shaped Labyrinth double split open loop resonators (OLRs) are introduced in this article to design a triple bandpass filter for 3.01 GHz, 7.39 GHz and 12.88 GHz applications. A Rogers RT-5880 is used as a substrate to design the proposed passband filter which has a succinct structure where the attainment of the resonator is explored both integrally and experimentally. The same structure is designed on both sides of the substrate and an analysis is made on the current distribution. Based on the proposed resonator, a bandpass filter is designed and fabricated to justify the perception focusing on 3.01 GHz, 7.39 GHz and 12.88 GHz. It has also been observed by the Nicolson–Ross–Weir approach at the filtering frequencies. The effective electromagnetic parameters retrieved from the simulation of the S-parameters imply that the OLR metamaterial filter shows negative refraction bands. Having an auspicious design and double negative characteristics, this structure is suitable for triple passband filters, particularly for S, C and X-band applications.

Design of Microwave Multibandpass Filters with Quasilumped Resonators

Design of RF and microwave filters has always been the challenging engineering field. Modern filter design techniques involve the use of the three-dimensional electromagnetic (3D EM) solvers for predicting filter behavior, yielding the most accurate filter characteristics. However, the 3D EM simulations are time consuming. In this paper, we propose electric-circuit models, instead of 3D EM models, suitable for design of RF and microwave filters with quasilumped coupled resonators. Using the diakoptic approach, the 3D filter structure is decomposed into domains that are modeled by electric networks. The coupling between these domains is modeled by capacitors and coupled inductors. Furthermore, we relate the circuit-element values to the physical dimensions of the 3D filter structure. We propose the filter design procedure that is based on the circuit models and fast circuit-level simulations, yielding the element values from which the physical dimensions can be obtained. The obtained dimensions should be slightly refined for achieving the desired filter characteristics. The mathematical problems encountered in the procedure are solved by numerical and symbolic computations. The procedure is exemplified by designing a triple-bandpass filter and validated by measurements on the fabricated filter. The simulation and experimental results are in good agreement.

Polarised stereo endoscope and narrowband detection for minimal access surgery.

Polarisation imaging has the potential to provide enhanced contrast based on variations in the optical properties, such as scattering or birefringence, of the tissue of interest. Examining the signal at different wavebands in the visible spectrum also allows interrogation of different depths and structures. A stereo endoscope has been adapted to allow snapshot acquisition of orthogonal linear polarisation images to generate difference of linear polarisation images. These images are acquired in three narrow bands using a triple-bandpass filter and pair of colour cameras. The first in vivo results, acquired during a surgical procedure on a porcine subject, are presented that show wavelength dependent variations in vessel visibility and an increase in contrast under polarised detection.

New π –T generalised metamaterial negative refractive index transmission line for a compact coplanar waveguide triple band pass filter applications

This study presents, for the first time, a novel π − T generalised negative refractive index (NRI) transmission line (TL) configuration. It is innovated for increasing the possible passbands in designing microwave components. It is proved that the proposed transmission line can introduce up to seven passbands for completely unbalanced transmission line condition. The detailed mathematical analysis of that configuration based on the periodic network analysis and equivalent circuit model is introduced. As an application for the novel π − T generalised NRI TL configuration, a new compact triple band coplanar waveguide (CPW) metamaterial filter is introduced. The proposed triple bands CPW filter design steps are introduced and its performance is validated using equivalent circuit model simulation, electromagnetic full wave simulation and experimental measurements. Good agreements between the circuit modelling, electromagnetic full wave simulation and practical measurement results are achieved. All the results confirm that the proposed filter has triple passbands from 900 to 960 MHz, 1.4 to 1.48 GHz and 2.4 to 2.45 GHz. Moreover the filter size is compact whose length is only 12.1% λg at first passbands, 18.2 λg % at second passbands and 31.7 λg % at third passbands.

Coupled atomic coherences induced by a standing wave

Atomic coherence effects with a strong standing-wave coupling field on a four-level system of hot Rb atoms are investigated. Amplitude modulation and phase modulation of the strong standing-wave field are coherently coupled in linear and nonlinear atomic polarizations in various multi-wave mixing processes. Such coupled atomic coherence effect leads to one-photon triple-bandpass filters in an electromagnetically induced transparency structure and two-photon bandgaps at two different wavelengths under two-photon resonance in the hot four-level Rb atoms. Such system can be useful for dispersion compensation in multi-channel WDM systems, all-optical switching and optical filters at multiple wavelengths.

A CAD model of triple bandpass filter implemented with mushroom structure

This article demonstrates the design of planar triple-band filter using mushroom resonator for significant size reduction of the order 80%. Here, mushroom type resonator is used to realize a triple passband filter using the coupling matrix approach. The electric and magnetic couplings between the mushroom resonators are achieved by proper positioning of corner via which have been analyzed and presented. Finally, the frequency transformation has been applied to design a highly selective 12-pole triple-passband cascaded-quartets filter. This symmetric triple-band filter is operative at center frequencies 3.41/3.56/3.72 GHz with 100 MHz bandwidth of each band. It is observed that the measured results are in good agreement with the simulated results. A significant size reduction has been achieved while realizing triple-passband filter, which is as small as 50 mm × 25 mm × 1.27 mm. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:421–428, 2014.

Exogenous glucose improves long-standing human sperm motility, viability, and mitochondrial function

A relevant fraction of human sperm can be maintained in simple phosphate-buffered saline (PBS) for more than 1 week at room temperature, a time that could be doubled if glucose was available. This does not seem to be directly due to sperm mitochondrial activity.

Novel triple-bandpass microstrip filter with flexible passband assignment

A novel approach for designing triple-bandpass filters has been presented in this letter.The triple-bandpass filters are constructed by stepped impedance resonators and common half-wavelength resonators. The stepped-impedance resonators operate at the first and third passband and some coupled resonators are introduced to increase the degrees of freedom in extracting coupling coefficients of the first and third passband. The other resonators are designed to operate at the second passband. This structure improves design freedom to fit easily the specific coupling coefficients at all passbands simultaneously and the locations of each passband can also be tuned in a large region. To verify the presented concept, two experimental examples of filters with a triple-band Chebyshev and triple-band quasi-elliptic response operating at 2.4, 3.6, and 5.2 GHz was designed and fabricated with microstrip technology. The measured results are in good agreement with the full-wave simulation results. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26207

The Homotetrameric Kinesin-5 KLP61F Preferentially Crosslinks Microtubules into Antiparallel Orientations

The segregation of genetic material during mitosis is coordinated by the mitotic spindle, whose action depends upon the polarity patterns of its microtubules (MTs). Homotetrameric mitotic kinesin-5 motors can crosslink and slide adjacent spindle MTs, but it is unknown whether they or other motors contribute to establishing these MT polarity patterns. Here, we explored whether the Drosophila embryo kinesin-5 KLP61F, which plausibly crosslinks both parallel and antiparallel MTs, displays a preference for parallel or antiparallel MT orientation. In motility assays, KLP61F was observed to crosslink and slide adjacent MTs, as predicted. Remarkably, KLP61F displayed a 3-fold higher preference for crosslinking MTs in the antiparallel orientation. This polarity preference was observed in the presence of ADP or ATP plus AMPPNP, but not AMPPNP alone, which induces instantaneous rigor binding. Also, a purified motorless tetramer containing the C-terminal tail domains displayed an antiparallel orientation preference, confirming that motor activity is not required. The results suggest that, during morphogenesis of the Drosophila embryo mitotic spindle, KLP61F's crosslinking and sliding activities could facilitate the gradual accumulation of KLP61F within antiparallel interpolar MTs at the equator, where the motor could generate force to drive poleward flux and pole-pole separation.

Induction of Cell Membrane Protrusions by the N-terminal Glutaredoxin Domain of a Rare Splice Variant of Human Thioredoxin Reductase 1

The human thioredoxin system has a wide range of functions in cells including regulation of cell proliferation and differentiation, immune system modulation, antioxidant defense, redox control of transcription factor activity, and promotion of cancer development. A key component of this enzymatic system is the selenoprotein thioredoxin reductase 1 (TrxR1), encoded by the TXNRD1 gene. Transcription of TXNRD1 involves alternative splicing, leading to a number of transcripts also encoding isoforms of TrxR1 that differ from each other at their N-terminal domains. Here we have studied the TXNRD1_v3 isoform containing an atypical N-terminal glutaredoxin (Grx) domain. Expression of the transcript of this isoform was found predominantly in testis but was also detected in ovary, spleen, heart, liver, kidney, and pancreas. By immunohistochemical analysis in human testis with antibodies specific for the Grx domain of TXNRD1_v3, the protein was found to be predominantly expressed in the Leydig cells. Expression of the TXNRD1_v3 transcript was also found in several cancer cell lines (HCC1937, H23, A549, U1810, or H157), and in HeLa cells, it was induced by estradiol or testosterone treatments. Surprisingly, green fluorescent protein fusions with the complete TXNRD1_v3 protein or with only its Grx domain localized to distinct cellular sites in proximity to actin, and furthermore, had a potent capacity to rapidly induce cell membrane protrusions. Analyses of these structures suggested that the Grx domain of TXNRD1_v3 localizes first in the emerging protrusion and is then followed into the protrusions by actin and subsequently by tubulin. The results presented thus reveal that TXNRD1_v3 has a unique and distinct expression pattern in human cells and suggest that the protein can guide actin polymerization in relation to cell membrane restructuring.

Optical Interference Coatings Design Contest 2007: triple bandpass filter and nonpolarizing beam splitter

A triple bandpass filter (28 solutions received) and a nonpolarizing beam splitter (23 solutions received) were the subjects of the design contest held in conjunction with the 2007 Optical Interference Coatings topical meeting of the Optical Society of America. Fifteen designers participated using a wide spectrum of design approaches and optimization strategies to create the submissions. The results differ significantly, but all meet the contest requirements. Fabien Lemarchand wins both contests by submitting the thinnest (6254 nm) triple bandpass design and the widest (61.7 nm) nonpolarizing beam-splitter design. Michael Trubetskov is in second place, followed by Vladimir Pervak in both contests. The submitted designs are described and evaluated.

Activation of Syntaxin 1C, an Alternative Splice Variant of HPC-1/Syntaxin 1A, by Phorbol 12-Myristate 13-Acetate (PMA) Suppresses Glucose Transport into Astroglioma Cells via the Glucose Transporter-1 (GLUT-1)

Syntaxin 1C is an alternative splice variant lacking the transmembrane domain of HPC-1/syntaxin 1A. We found previously that syntaxin 1C is expressed as a soluble protein in human astroglioma (T98G) cells, and syntaxin 1C expression is enhanced by stimulation with phorbol 12-myristate 13-acetate (PMA). However, the physiological function of syntaxin 1C is not known. In this study, we examined the relationship between syntaxin 1C and glucose transport. First, we discovered that glucose transporter-1 (GLUT-1) was the primary isoform in T98G cells. Second, we demonstrated that glucose uptake in T98G cells was suppressed following an increase in endogenous syntaxin 1C after stimulation with PMA, which did not alter the expression levels of other plasma membrane syntaxins. We further examined glucose uptake and intracellular localization of GLUT-1 in cells that overexpressed exogenous syntaxin 1C; glucose uptake via GLUT-1 was inhibited without affecting sodium-dependent glucose transport. The value of Vmax for the dose-dependent uptake of glucose was reduced in syntaxin 1C-expressing cells, whereas there was no change in Km. Immunofluorescence studies revealed a reduction in the amount of GLUT-1 in the plasma membrane in cells that expressed syntaxin 1C. Based on these results, we postulate that syntaxin 1C regulates glucose transport in astroglioma cells by changing the intracellular trafficking of GLUT-1. This is the first report to indicate that a syntaxin isoform that lacks a transmembrane domain can regulate the intracellular transport of a plasma membrane protein.

Spectral karyotyping, a 24-colour FISH technique for the identification of chromosomal rearrangements.

Spectral karyotyping (SKY) is a new fluorescence in situ hybridisation (FISH) technique that refers to the molecular cytogenetic analysis of metaphase preparations by means of spectral microscopy. For SKY of human metaphase chromosomes, 24 chromosome-specific painting probes are used in just one FISH experiment. The probes are labelled by degenerate oligonucleotide-primed PCR using three fluorochromes and two haptens. Each probe is differentially labelled with one, two, three or four fluorescent dyes, resulting in a unique spectral signature for every chromosome. After in situ hybridisation and immunodetection, a spectral image is acquired using a conventional fluorescence light microscope equipped with a custom-designed triple-bandpass filter and the SpectraCube, which is able to retrieve spectral information for every pixel in a digital CCD image. The 24-colour display and chromosome classification are based on the unique emission spectra of the chromosomes. Together with chromosome banding information from an inverted DAPI or a G-banded metaphase, a comprehensive overview of chromosomal aberrations is presented.

Comparative genomic hybridization imaging by the one‐chip true‐color CCD camera Kappa CF 15 MC

In comparative genomic hybridization (CGH), quantitative measurement of fluorescence intensity ratios on metaphase chromosomes is the basic method for detecting copy number changes in the test DNA. The microscope images are usually acquired by high-resolution, highly sensitive, black and white (B&W) CCD cameras. This requires subsequent recording of the different color images using appropriate filter combinations for excitation and emission. We describe an alternative approach using the one-chip true-color CCD camera Kappa CF 15 MC and an Omega triple-bandpass filter for simultaneous registration of the three dyes Texas red, FITC, and DAPI. A detailed examination of the imaging properties of the system was performed. The camera response in the three color planes R, G, and B was evaluated, and calibration factors for image correction were calculated. An error estimate is given. A complete computer program for the image analysis of CGH experiments has been developed for an 80486 PC, using the commercially available software package Optimas as the basis for image recording. Examples that confirm the suitability of the system for ratio imaging in CGH are presented. The results were compared with others obtained from the same microscope slides using an established setup consisting of a B&W CCD camera (Photometrics) and a software program based on the TCL software package and run on a Macintosh Quadra 950. The results obtained using the two different systems were found to correspond closely. © 1996 Wiley-Liss, Inc.