Trigger Delay Research Articles

The Effect of Laser Energy on the Initial Plasma Characteristics of Laser-Triggered Vacuum Switch

With the development of pulsed-power technology, more and more applications require high-voltage and heavy-current pulse switches. Laser-triggered vacuum switch combines laser technology, vacuum switch technology, and three-electrode trigger switch technology, and has the advantages of heavy current capability, good isolation from the main circuit, and short delay time. In this paper, the 1-D thermal conduction model was developed to analyze the influence of laser energy on the velocity of initial plasma. The relationship between the ablation area and the laser energy was derived. The theoretical analysis can be verified by the relationship between the trigger delay time and laser energy and the initial plasma microcurrent curve in the experiments.

Effect of Cardiogenic Oscillations on Trigger Delay During Pressure Support Ventilation.

Sensitive flow or pressure triggers are usually applied to improve ventilator response time. Conversely, too sensitive triggers can incur risk of auto-triggering, a type of asynchrony in which a breath is triggered without inspiratory muscle activity. A frequent cause of auto-triggering is cardiogenic oscillations, characterized by cyclical variations in pressure and flow waveforms caused by cardiac contractions. Our goal was to test trigger performance and capacity to abolish auto-triggering in 5 different ICU ventilators using different simulated levels of cardiogenic oscillations. A mechanical breathing simulator was used to test 5 different ICU ventilators' trigger response time and capacity to minimize auto-triggering in conditions with 0, 0.25, 0.5, and 1 cm H2O cardiogenic oscillation. Each ventilator was evaluated until an ideal trigger was found (the most sensitive that abolished auto-triggering). When the least sensitive flow trigger was unable to avoid auto-triggering, a pressure trigger was used. We compared time delay, airway pressure drop until triggering, and work of breathing before each trigger, all at the ideal trigger level for each cardiogenic oscillation amplitude. We also assessed the proportion of auto-triggered breaths in the whole range of trigger levels tested. Larger cardiogenic oscillations were associated with more frequent auto-triggering. To avoid auto-triggering, less sensitive triggers were required (+2.51 L/min per 1 cm H2O increase in cardiogenic oscillation; 95% CI 2.26-2.76, P < .001). Time delay increased with larger cardiogenic oscillations, because less sensitive trigger levels were required to abolish auto-triggering (4.79-ms increase per 1 L/min increment on flow trigger). More sensitive triggers led to faster ventilator response, but also to more frequent auto-triggering. To avoid auto-triggering, less sensitive triggers were required, with consequent slower trigger response. To compare trigger performance in a scenario that more closely represents clinical practice, evaluation of the tradeoff between time delay and frequency of auto-triggering should be considered.

Characterization and Statistical Analysis of Breakdown Data for a Corona-Stabilized Switch in Environmentally Friendly Gas Mixtures

Characterization of a corona-stabilized switch in the single-shot regime, including triggering range, delay times, and jitter, is reported over the pressure range 0–3 bar gauge, as a continuation of work from similar characterization with this switch filled with SF6 with different gap spacings. When filled with mixtures of 1,3,3,3-tetrafluoropropene (HFO-1234ze) and N2, the breakdown voltage can be increased by up to ~306% and ~191% under negative and positive polarities, respectively, of that using 100% N2. These results were achieved with gas mixtures consisting of 80% N2 and 20% HFO-1234ze, by pressure. The maximum negative polarity triggering range was 13.6 kV, comparable to that achieved previously using SF6. The measured delay time and calculated jitter were generally found to increase with increasing pressure, and with increasing percentage (from 5% to 20%) of HFO-1234ze in the gas mixtures. von Laue statistical analysis of time-to-breakdown data showed that both the formative time and statistical time increased with increasing pressure, and with increasing percentage of HFO-1234ze in the gas mixtures. The formative time under negative polarity was significantly longer than that for positive polarity. The results indicate that HFO-1234ze may be considered as a suitable candidate to replace SF6 for switching applications, although there are some operational observations that require further investigation.

A novel trigger for pseudospark switch with high repetition rate, low jitter, and compact structure.

This paper presents the design and development of a trigger with a high repetition rate, low jitter, and compact structure for the pseudospark switch (PSS), which includes an improved Marx generator based on avalanche transistors and a corona-plasma trigger unit. The generator adopted a novel 3 × 12-stage Marx circuit based on avalanche transistors in which the failure rate of transistors in the first and second stages was significantly reduced by connecting the parallel capacitors compared to the previous similar generator. The reason for the improved performance was also discussed. The main parameters of output pulses were an amplitude of -7 kV, rise time of 6 ns, jitter of 0.2 ns, and repetition rate of 2 kHz. The corona-plasma trigger unit adopted BaTiO3 ceramics with high εr as the dielectric and was arranged in the hollow cathode of the PSS. The experiments of triggering a PSS prototype were conducted. The influence of anode voltage and pressure on the trigger delay and jitter was studied, and the minimum trigger jitter achieved <1 ns. This trigger worked for 107 shots at the repetition rate of 2 kHz continuously without obvious performance degradation and any failure of the generator. The main advantage of this trigger is the simultaneous combination of the high repetition rate, low jitter, long lifetime, and great simplicity in a compact structure.

Comparative bench study evaluation of different infant interfaces for non-invasive ventilation

BackgroundTo compare, in terms of patient-ventilator interaction and performance, a new nasal mask (Respireo, AirLiquide, FR) with the Endotracheal tube (ET) and a commonly used nasal mask (FPM, Fisher and Paykel, NZ) for delivering Pressure Support Ventilation (PSV) in an infant model of Acute Respiratory Failure (ARF).MethodsAn active test lung (ASL 5000) connected to an infant mannequin through 3 different interfaces (Respireo, ET and FPM), was ventilated with a standard ICU ventilator set in PSV. The test lung was set to simulate a 5.5 kg infant with ARF, breathing at 50 and 60 breaths/min). Non-invasive ventilation (NIV) mode was not used and the leaks were nearly zero.ResultsThe ET showed the shortest inspiratory trigger delay and pressurization time compared to FPM and Respireo (p < 0.01). At each respiratory rate tested, the FPM showed the shortest Expiratory trigger delay compared to ET and Respireo (p < 0.01). The Respireo presented a lower value of Inspiratory pressure–time product and trigger pressure drop than ET (p < 0.01), while no significant difference was found in terms of pressure-time product at 300 and 500 ms. During all tests, compared with the FPM, ET showed a significantly higher tidal volume (VT) delivered (p < 0.01), while Respireo showed a trend toward an increase of tidal volume delivered compared with FPM.ConclusionsThe ET showed a better patient-ventilator interaction and performance compared to both the nasal masks. Despite the higher internal volume, Respireo showed a trend toward an increase of the delivered tidal volume; globally, its efficiency in terms of patient-ventilator interaction was comparable to the FPM, which is the infant NIV mask characterized by the smaller internal volume among the (few) models on the market.

Effect of cardiac-related translational motion in diffusion MRI of the spinal cord

Cardiac-related spinal cord motion affects diffusion-weighted (DWI) signal. The goal of this study was to further quantify the specific detrimental effect of cord translational motion on the DWI signal in order to make better informed decisions about the cost-benefit of cardiac gating.We designed an MRI-compatible phantom mimicking the spinal cord translational motion. Cardiac-gated DWI data were acquired by varying the trigger delay and the b-values. Evaluation of the effect of motion on the DWI signal was done by computing the apparent diffusion coefficient (ADC) along (z-direction) and orthogonal (y- and x-directions) to the phantom.The computed ADCs of the phantom moving along Z were similar for the three orthogonal diffusion-encoding directions, with an average value of 1.65·10−9 , 1.66·10−9 and 1.65·10−9 m2/s along X, Y and Z respectively. DW phase images on the other hand showed the expected linear relationship with phantom velocity.Pure translational motion has minor effect on the diffusion-weighted magnitude signal. The sudden signal drop typically observed in in vivo spinal cord DWI is likely not caused by translational motion of the spinal cord, and possibly originates from non-rigid compression/stretching of the cord and/or from intra-voxel incoherent motion (IVIM).

An Interband Time-Delay Compensation Algorithm for Concurrent Dual-Band Power Amplifier Characterization

In this letter, an interband time-delay compensation algorithm that is based on correlation enhancement technique has been proposed to process the signals used for concurrent dual-band power amplifier (PA) characterization, where the characterization is a crucial step of behavioral modeling and digital predistortion (DPD) of the PA, and the interband time delay represents the difference of delay time between different channels. Compared with the traditional compensation method which adjusts the trigger or marker delay manually, the proposed method can work online and shows a higher performance. Finally, the modeling and DPD performance of a wideband PA, which works in concurrent dual-band mode, are evaluated to verify the feasibility and advantages of the proposed algorithm.

Respiratory trigger signal generation by means of a stretchable sensor array

Respiratory monitoring is a clinical method which helps to examine the medical condition of patients. Patients diagnosed with types of respiratory distress are often supported through artificial respiration. To be able to adapt and synchronize airway pressures and flows to the patient’s own breathing for improved respiration efficiency, intelligent sensors are needed to detect the beginning and ending of the breathing cycle. An ultra-thin and stretchable 6 × 6 sensor array with skin-like properties is presented that is used to generate a trigger signal which is suitable to control and synchronize artificial respiration with the patient's own breathing. Stretchability of the sensor array is achieved by fs-laser structuring of the thin polyimide sensor substrate resulting in small sensor islands connected via slender meandering electrical leads. The resulting stretchable sensor grid is embedded in layers of PDMS whereby a skin-friendly sensor patch is created. To simulate respiration an externally ventilated dummy is used. The principle of trigger signal generation from multiple sensor signals is based on a self-developed algorithm that first evaluates the signal quality of each sensor based on adjustable parameters. Only the sensors selected as suitable are then used to calculate an averaged scaled signal, which is taken for trigger point detection. The best results were typically obtained when quality factures are set to a level where about half of the sensors are contributing to the trigger detection, leading to a trigger delay of about 80 ms relative to the pressure reference signal. It could also be shown that the algorithm can resume the trigger point detection within 2–3 s, after manually applying disturbances which could similarly occur in the clinical environment. The results show that the skin-friendly sensor patch provides suitable trigger signals for artificial respiration which are robust against drop out of single sensors, non-ideal sensor patch positioning on the thorax and mechanical irritations.

Dual-energy CT iodine maps as an alternative quantitative imaging biomarker to abdominal CT perfusion: determination of appropriate trigger delays for acquisition using bolus tracking.

Quantitative evaluation of different bolustracking trigger delays for acquisition of dualenergy (DE) CT iodine maps as an alternative to CT perfusion. Prior to this retrospective analysis of prospectively acquired data, DECT perfusion sequences were dynamically acquired in 22 patients with pancreatic carcinoma using dualsource CT at 80/140kVp with tin filtration. After deformable motion-correction, perfusion maps of blood flow (BF) were calculated from 80kVp image series of DECT, and iodine maps were calculated for each of the 34 DECT acquisitions per patient. BF and iodine concentrations were measured in healthy pancreatic tissue and carcinoma. To evaluate potential DECT acquisition triggered by bolus tracking, measured iodine concentrations from the 34 DECT acquisitions per patient corresponding to different trigger delays were assessed for correlation to BF and intergroup differences between tissue types depending on acquisition time. Average BF measured in healthy pancreatic tissue and carcinoma was 87.6 ± 28.4 and 38.6 ± 22.2 ml/100 mlmin-1, respectively. Correlation between iodine concentrations and BF was statistically significant for bolus tracking with trigger delay greater than 0 s (rmax = 0.89; p < 0.05). Differences in iodine concentrations between healthy pancreatic tissue and carcinoma were statistically significant for DECT acquisitions corresponding to trigger delays of 15-21 s (p < 0.05). An acquisition window between 15 and21 s after exceeding bolus tracking threshold shows promising results for acquisition of DECT iodine maps as an alternative to CTperfusion measurements of BF. Advances in knowledge: After clinical validation, DECT iodine maps of pancreas acquired using bolus tracking with appropriate trigger delay as determined in this study could offer an alternative quantitative imaging biomarker providing functional information for tumor assessment at reduced patient radiation exposure compared to CTperfusion measurements of BF.

线阵图像采集系统外触发延时时间的确定

线阵图像采集系统外触发延时时间的确定

Patient\u2013ventilator asynchrony during conventional mechanical ventilation in children

BackgroundWe aimed (1) to describe the characteristics of patient–ventilator asynchrony in a population of critically ill children, (2) to describe the risk factors associated with patient–ventilator asynchrony, and (3) to evaluate the association between patient–ventilator asynchrony and ventilator-free days at day 28.MethodsIn this single-center prospective study, consecutive children admitted to the PICU and mechanically ventilated for at least 24 h were included. Patient–ventilator asynchrony was analyzed by comparing the ventilator pressure curve and the electrical activity of the diaphragm (Edi) signal with (1) a manual analysis and (2) using a standardized fully automated method.ResultsFifty-two patients (median age 6 months) were included in the analysis. Eighteen patients had a very low ventilatory drive (i.e., peak Edi < 2 µV on average), which prevented the calculation of patient–ventilator asynchrony. Children spent 27% (interquartile 22–39%) of the time in conflict with the ventilator. Cycling-off errors and trigger delays contributed to most of this asynchronous time. The automatic algorithm provided a NeuroSync index of 45%, confirming the high prevalence of asynchrony. No association between the severity of asynchrony and ventilator-free days at day 28 or any other clinical secondary outcomes was observed, but the proportion of children with good synchrony was very low.ConclusionPatient–ventilator interaction is poor in children supported by conventional ventilation, with a high frequency of depressed ventilatory drive and a large proportion of time spent in asynchrony. The clinical benefit of strategies to improve patient–ventilator interactions should be evaluated in pediatric critical care.

Ignitron-Based Switching Scheme for Multiple Ignitron Triggering in Pulsed Power Applications

This paper describes a low-cost ignitron-based switching scheme for transferring energy from capacitor bank to various loads, used in plasma physics and other pulsed power applications. Battery-operated driver modules have been designed to simultaneously trigger two ignitrons in parallel by using either transistor–transistor logic pulses or optical pulses using a fiber-optic interface with optical fibers of length up to 50 m, for applications prone to generate electromagnetic interferences. These driver modules are designed using insulated gate bipolar transistors as switches to deliver a pulse of amplitude of ~500 A and rise time of $\sim 1.2~\mu \text{s}$ to the ignitor–cathode junction of their respective ignitrons. The modules are designed to facilitate triggering of multiple ignitrons required for large current applications. The feasibility of this scheme and the performance of designed circuit are characterized using a test setup. Statistical variation of triggering delay for single ignitrons is studied extensively, and the effect of trigger energy on statistical parameters is reported. Jitters of 63.5 and 85 ns, respectively, have been observed for triggering of each ignitron used in this scheme. Difference in triggering of two ignitrons connected in parallel is also studied, and a jitter of 150 ns is observed in the onset of current discharges through individual ignitrons.

1 μs broadband frequency sweeping reflectometry for plasma density and fluctuation profile measurements.

Frequency swept reflectometry has reached the symbolic value of 1 μs sweeping time; this performance has been made possible, thanks to an improved control of the ramp voltage driving the frequency source. In parallel, the memory depth of the acquisition system has been upgraded and can provide up to 200 000 signals during a plasma discharge. Additional improvements regarding the trigger delay determination of the acquisition and the voltage ramp linearity required by this ultra-fast technique have been set. While this diagnostic is traditionally dedicated to the plasma electron density profile measurement, such a fast sweeping rate can provide the study of fast plasma events and turbulence with unprecedented time and radial resolution from the edge to the core. Experimental results obtained on ASDEX Upgrade plasmas are presented to demonstrate the performances of the diagnostic.

Analytical Method for DFIG Transients During Voltage Dips

Electromagnetic transients resulting from voltage dips not only present challenges for low-voltage ride-through (LVRT) of doubly fed induction generators (DFIGs) in wind turbines (WTs) but also introduce complications for protective relays in power systems. Analysis of the voltage-dip response is a fundamental requirement for methodologies targeting LVRT performance and is also useful for power system development. To date, it has not been feasible to take into account the interval between voltage dip and crowbar triggering, and, consequently, the accuracy of the analytical results has been compromised. In this paper, a concept of equivalent fault source is presented with which the transient process during voltage dips is decomposed into one response to the equivalent stator fault source and the other response to the equivalent rotor fault source. The former results from dips in the supply voltage, while the latter arises from variations in both the rotor resistance and the control voltage produced by crowbar activation. This makes it feasible to incorporate the interval, i.e., the triggering delay, into the analytical solution. Additionally, this decomposition approach allows for the physical mechanisms behind the individual transient components to be more clearly understood. With the explicit analytical formulas, some intrinsic characteristics of the transients are identified. The comparative accuracy and advantages of this analytical method over the conventional approaches is demonstrated through simulations using a 2-MW DFIG for commercial WTs and further verified experimentally on a laboratory-scale test rig.

A fast and accurate zebra finch syllable detector.

The song of the adult male zebra finch is strikingly stereotyped. Efforts to understand motor output, pattern generation, and learning have taken advantage of this consistency by investigating the bird’s ability to modify specific parts of song under external cues, and by examining timing relationships between neural activity and vocal output. Such experiments require that precise moments during song be identified in real time as the bird sings. Various syllable-detection methods exist, but many require special hardware, software, and know-how, and details on their implementation and performance are scarce. We present an accurate, versatile, and fast syllable detector that can control hardware at precisely timed moments during zebra finch song. Many moments during song can be isolated and detected with false negative and false positive rates well under 1% and 0.005% respectively. The detector can run on a stock Mac Mini with triggering delay of less than a millisecond and a jitter of σ ≈ 2 milliseconds.

New setting of neurally adjusted ventilatory assist for noninvasive ventilation by facial mask: a physiologic study

BackgroundNoninvasive ventilation (NIV) is generally delivered using pneumatically-triggered and cycled-off pressure support (PSP) through a mask. Neurally adjusted ventilatory assist (NAVA) is the only ventilatory mode that uses a non-pneumatic signal, i.e., diaphragm electrical activity (EAdi), to trigger and drive ventilator assistance. A specific setting to generate neurally controlled pressure support (PSN) was recently proposed for delivering NIV by helmet. We compared PSN with PSP and NAVA during NIV using a facial mask, with respect to patient comfort, gas exchange, and patient-ventilator interaction and synchrony.MethodsThree 30-minute trials of NIV were randomly delivered to 14 patients immediately after extubation to prevent post-extubation respiratory failure: (1) PSP, with an inspiratory support ≥8 cmH2O; (2) NAVA, adjusting the NAVA level to achieve a comparable peak EAdi (EAdipeak) as during PSP; and (3) PSN, setting the NAVA level at 15 cmH2O/μV with an upper airway pressure (Paw) limit to obtain the same overall Paw applied during PSP. We assessed patient comfort, peak inspiratory flow (PIF), time to reach PIF (PIFtime), EAdipeak, arterial blood gases, pressure-time product of the first 300 ms (PTP300-index) and 500 ms (PTP500-index) after initiation of patient effort, inspiratory trigger delay (DelayTR-insp), and rate of asynchrony, determined as asynchrony index (AI%). The categorical variables were compared using the McNemar test, and continuous variables by the Friedman test followed by the Wilcoxon test with Bonferroni correction for multiple comparisons (p < 0.017).ResultsPSN significantly improved patient comfort, compared to both PSP (p = 0.001) and NAVA (p = 0.002), without differences between the two latter (p = 0.08). PIF (p = 0.109), EAdipeak (p = 0.931) and gas exchange were similar between modes. Compared to PSP and NAVA, PSN reduced PIFtime (p < 0.001), and increased PTP300-index (p = 0.004) and PTP500-index (p = 0.001). NAVA and PSN significantly reduced DelayTR-insp, as opposed to PSP (p < 0.001). During both NAVA and PSN, AI% was <10% in all patients, while AI% was ≥10% in 7 patients (50%) with PSP (p = 0.023 compared with both NAVA and PSN).ConclusionsCompared to both PSP and NAVA, PSN improved comfort and patient-ventilator interaction during NIV by facial mask. PSN also improved synchrony, as opposed to PSP only.Trial registrationClinicalTrials.gov, NCT03041402. Registered (retrospectively) on 2 February 2017.

Effects of neurally adjusted ventilatory assist on air distribution and dead space in patients with acute exacerbation of chronic obstructive pulmonary disease

BackgroundNeurally adjusted ventilatory assist (NAVA) could improve patient-ventilator interaction; its effects on ventilation distribution and dead space are still unknown. The aim of this study was to evaluate the effects of varying levels of assist during NAVA and pressure support ventilation (PSV) on ventilation distribution and dead space in patients with acute exacerbation of chronic obstructive pulmonary disease (AECOPD).MethodsFifteen mechanically ventilated patients with AECOPD were included in the study. The initial PSV levels were set to 10 cmH2O for 10 min. Thereafter, the ventilator mode was changed to NAVA for another 10 min with the same electrical activity of the diaphragm as during PSV. Furthermore, the ventilation mode was switched between PSV and NAVA every 10 min in the following order: PSV 5 cmH2O; NAVA 50%; PSV 15 cmH2O; and NAVA 150% (relative to the initial NAVA support level). Ventilation distribution in the lung was evaluated in percentages in regions of interest (ROI) of four anteroposterior segments of equal height (ROI1 to ROI4 represents ventral, mid-ventral, mid-dorsal, and dorsal, respectively). Blood gases, ventilation distribution (electrical impedance tomography), diaphragm activity (B-mode ultrasonography), and dead space fraction (PeCO2 and PaCO2) were measured.ResultsThe trigger and cycle delays were lower during NAVA than during PSV. The work of trigger was significantly lower during NAVA compared to PSV. The diaphragm activities based on ultrasonography were higher during NAVA compared to the same support level during PSV. The ventilation distribution in ROI4 increased significantly (P < 0.05) during NAVA compared to PSV (except for a support level of 50%). Similar results were found in ROI3 + 4. NAVA reduced dead space fraction compared to the corresponding support level of PSV.ConclusionsNAVA was superior to PSV in AECOPD for increasing ventilation distribution in ROI4 and reducing dead space.Trial registrationClinicaltrials.gov, NCT02289573. Registered on 12 November 2014.

A Relevant Inrush Current Limitation Based on SCRs Smart Control Used in EV Battery Chargers

In this article, an active inrush current limiter based on the phase shift control of silicon controlled rectifiers (SCRs) is proposed. These SCRs are used in medium power AC-DC converters (up to 3.7 kW) for electric vehicle (EV) charging systems. The control strategy consists in adjusting the triggering delay of SCRs both to limit the peak value of inrush current spikes and accelerate the charge of the DC-link capacitor of the converter. A modeling of the AC-DC converter, based on mathematical calculations, is necessary to implement the control strategy of the SCRs. Experimental test results demonstrate the robustness of the method, and confirm the modeling results.

Measurement of the timing behaviour of off-the-shelf cameras

This paper presents a measurement method suitable for investigating the timing properties of cameras. A single light source illuminates the camera detector starting with a varying defined delay after the camera trigger. Pixels from the recorded camera frames are summed up and normalised, and the resulting function is indicative of the overlap between illumination and exposure. This allows one to infer the trigger delay and the exposure time with sub-microsecond accuracy. The method is therefore of interest when off-the-shelf cameras are used in reactive systems or synchronised with other cameras. It can supplement radiometric and geometric calibration methods for cameras in scientific use. A closer look at the measurement results reveals deviations from the ideal camera behaviour of constant sensitivity limited to the exposure interval. One of the industrial cameras investigated retains a small sensitivity long after the end of the nominal exposure interval. All three investigated cameras show non-linear variations of sensitivity at to during exposure. Due to its sign, the latter effect cannot be described by a sensitivity function depending on the time after triggering, but represents non-linear pixel characteristics.

A comparison of leak compensation in six acute care ventilators during non-invasive ventilation

Objective: To compare the ability of leak compensation in 6 medical ventilators during non-invasive ventilation. Methods: Six medical ventilators were selected, including 3 non-invasive ventilators (V60, Flexo and Stellar150), and 3 invasive ventilators(Avea, Servo I and BellaVist). Using a lung simulator, the ability of leak compensation was evaluated during triggering and cycling in 2 respiratory mechanics conditions (high airway resistance condition and high elastance resistance condition), and each condition was performed under 2 PEEP levels (4, and 8 cmH(2)O, 1 mmHg=0.098 kPa) at 4 air leak level conditions (L0: 2-3 L/min, L1: 8-10 L/min, L2: 22-27 L/min, L3: 35-40 L/min). Results: In the high elastance resistance condition (L2, L3)with different leak levels, the number of auto-triggering and miss-triggering of the non-invasive ventilator Flexo was significantly less than those of the others (L2: 1, 1; L3: 1.67, 1.33, P<0.01), and had better synchronization (L2: 2.33, 2.33; L3: 3.33, 3.33, P<0.01). In the high airway resistance condition with PEEP 4 cmH(2)O, V60 had less number of auto-triggering than other ventilators (P<0.01), while in the high airway resistance condition with PEEP 8 cmH(2)O, Stellar150 had less number of miss-triggering than other ventilators (1, 0.67, 0, P<0.01). Flexo had a shorter trigger delay time than other ventilators in both high airway resistance and high elastance resistance conditions with L0 and L1 leak levels and PEEP levels [ARDS, PEEP=4: (109.8±1.8) ms, (112.0±0.6) ms; ARDS, PEEP=8: (103.1±0.7) ms, (109.7±0.7) ms; COPD, PEEP=4: (207.3±1.1) ms, (220.8±1.1) ms; COPD, PEEP=8: (195.6±6.7) ms, (200.0±1.2) ms , P<0.01]. Stellar150 had the shortest trigger delay time in high airway resistance condition with PEEP 4 cmH(2)O and high leak level L3[(262.8±0.8) ms , P<0.01]. V60 had a good performance on trigger delay time in high elastance resistance condition with PEEP 4 and 8 cmH(2)O, and also was most stable in increasing leak levels. Conclusion: In high airway resistance and high elastance resistance conditions with different PEEP levels and leak levels, V60, Stellar150, Flexo and BellaVista ventilators could be synchronized, among which V60, Stellar150 and Flexo presented a good performance features in specific conditions.