Triethylene Glycol Groups Research Articles

Moisture‐resistant nitroaromatic explosive gas sensor based on hydrophilic pentiptycene polymer

AbstractThe detection of explosive materials, particularly nitroaromatic compounds such as 2,4,6‐trinitrotoluene (TNT), is critical for public safety and national security. Existing detection methods often require complex instrumentation, limiting their applicability for real‐time or in‐field use. Fluorescent sensors, which offer rapid and sensitive detection through fluorescence quenching, present a promising alternative. This study evaluates the performance of two pentiptycene‐based polymers, P‐1 and P‐2, in detecting explosive vapors, with a specific focus on their behavior under high‐humidity conditions. P‐2, modified with triethylene glycol groups, demonstrated significantly increased hydrophilicity compared to the commonly studied P‐1, as confirmed by contact angle measurements. Spectroscopic analysis revealed a blue shift in P‐2's UV–Vis absorption and photoluminescence spectra, indicating electronic property changes due to structural modifications. The enhanced hydrophilicity of P‐2 enabled it to maintain stable sensing performance under moist conditions, showing less than a 10% reduction in sensitivity, compared to the 20% decrease observed in P‐1. This superior moisture resistance suggests that P‐2 is a more robust and practical sensor for explosive detection in environments with variable humidity levels.

Special issue on enhanced photodynamic therapy: Part II

Special issue on enhanced photodynamic therapy: Part II

A novel BODIPY-based nano-photosensitizer with aggregation-induced emission for cancer photodynamic therapy

The discovery of aggregation-induced emission (AIE) effect provides opportunities for the rapid development of fluorescence imaging-guided photodynamic therapy (PDT). In this work, a boron dipyrromethene (BODIPY)-based photosensitizer (ET-BDP-O) with AIE characteristics was developed, in which the two linear arms of BODIPY group were linked with triphenylamine to form an electron Donor–Acceptor–Donor (D–A–D) architecture while side chain was equipped with triethylene glycol group. ET-BDP-O was able to directly self-assemble into nanoparticles (NPs) without supplement of any other matrices or stabilizers due to its amphiphilic property. The as-prepared ET-BDP-O NPs had an excellent colloid stability with the size of 125 nm. Benefiting from the AIE property, ET-BDP-O NPs could generate strong fluorescence and reactive oxygen species under light-emitting diode light irradiation (60[Formula: see text]mW/cm[Formula: see text]. After internalized in cancer cells, ET-BDP-O NPs were able to emit bright red fluorescence signal for bioimaging. In addition, the cell viability assay demonstrated that the ET-BDP-O NPs exhibited excellent photo-cytotoxicity against cancer cells, while negligible cytotoxicity under dark environment. Thus, ET-BDP-O NPs might be regarded as a promising photosensitizer for fluorescence imaging-guided PDT in future.

Chemo-photodynamic Activity of Silicon Phthalocyanines Bearing Cyclooxygenase Inhibitors on Colorectal Cancer Cell Lines.

Colorectal cancer ranks as the third most lethal cancer worldwide, resulting in over 1 million cases and 900 000 deaths per year. According to population-based studies, administration of long-term non-steroidal anti-inflammatory drugs (NSAIDs) was proven to reduce the risk of a subject developing colorectal cancer. In the present study, the anti-cancer activity of two different NSAIDs, sulindac- (Pc-1) or diclofenac-substituted (Pc-2) asymmetric silicon phthalocyanine derivatives, was evaluated in four different colorectal cancer cell lines bearing various carcinogenic mutations. In this context, the IC50 values of each compound after 24 and 48 h were determined on HCT116, SW480, LoVo, and HT29 cell lines, and the effects of the compounds on programmed cell death pathways apoptosis and autophagy, their impact on cell cycle progression, and the effect of NSAID moieties they bear on COX-1 and COX-2 proteins were analyzed. In addition, the photophysical and photochemical properties of a synthesized Pc derivative bearing axial diclofenac and triethylene glycol groups (Pc-2) have been investigated, and the compound has been characterized by using different analytical techniques. Our results indicated that both compounds inhibit COX protein expression levels, activate apoptosis in all cell lines, and lead to cell cycle arrest in the G2/M phase, depending on the COX expression profiles of the cell lines, indicating that NSAIDs can be coupled with Pc's to achieve increased anti-cancer activity, especially on cancer cells known to have high COX activity.

Lithium-Conducting Self-Assembled Organic Nanotubes.

Supramolecular polymers are compelling platforms for the design of stimuli-responsive materials with emergent functions. Here, we report the assembly of an amphiphilic nanotube for Li-ion conduction that exhibits high ionic conductivity, mechanical integrity, electrochemical stability, and solution processability. Imine condensation of a pyridine-containing diamine with a triethylene glycol functionalized isophthalaldehyde yields pore-functionalized macrocycles. Atomic force microscopy, scanning electron microscopy, and in solvo X-ray diffraction reveal that macrocycle protonation during their mild synthesis drives assembly into high-aspect ratio (>103) nanotubes with three interior triethylene glycol groups. Electrochemical impedance spectroscopy demonstrates that lithiated nanotubes are efficient Li+ conductors, with an activation energy of 0.42 eV and a peak room temperature conductivity of 3.91 ± 0.38 × 10-5 S cm-1. 7Li NMR and Raman spectroscopy show that lithiation occurs exclusively within the nanotube interior and implicates the glycol groups in facilitating efficient Li+ transduction. Linear sweep voltammetry and galvanostatic lithium plating-stripping tests reveal that this nanotube-based electrolyte is stable over a wide potential range and supports long-term cyclability. These findings demonstrate how the coupling of synthetic design and supramolecular structural control can yield high-performance ionic transporters that are amenable to device-relevant fabrication, as well as the technological potential of chemically designed self-assembled nanotubes.

Synergistic catalysis within core-shell Fe3O4@SiO2 functionalized with triethylene glycol (TEG)-imidazolium ionic liquid and tetramethylpiperidine N-oxyl (TEMPO) boosting selective aerobic oxidation of alcohols

HypothesisIt is expected that incorporation of 2, 2, 6, 6-tetra-methyl piperidine-N-oxyl radical (TEMPO) and an imidazolium bromide bearing hydrophilic triethylene glycol (TEG) groups on Fe3O4@SiO2 core–shell may not only result in a novel highly water-dispersible/magnetically separable multi-functional catalyst system for metal-free aerobic oxidation of alcohols, which operates through a synergistic relay pathway, but it could potentially provide a strong platform for simultaneous separation and recycling of all components. ExperimentsThe catalyst was prepared by anchoring TEMPO moieties onto a magnetic core–shell Fe3O4@SiO2 functionalized with an ionic liquid bearing TEG groups. The materials was characterized using transmission electron microscopy, Fourier transform infrared spectroscopy, nitrogen adsorption–desorption isotherms, thermal gravimetric analysis, and elemental analysis. The performance of the catalyst was evaluated and quantitatively measured in the aerobic oxidation of alcohols in water. FindingsThe catalyst exhibited excellent and stable colloidal dispersion in water and high performance in the aerobic oxidation of various types of alcohols under metal- and halogen-free reaction conditions. As hypothesized, strong synergistic effect between functionalized components was seen in the described reaction. The catalyst displayed excellent dual-adjustable-selectivity in the oxidation of primary alcohols to either the corresponding aldehydes or carboxylic acids by tuning the reaction solvent and/or reaction time and excellent recycling behavior through a “double-separation-strategy”.

Development of Helical Aromatic Amide Foldamers with a Diphenylacetylene Backbone.

We designed and synthesized aromatic polyamides with a diphenylacetylene backbone, α-DPA and β-DPA, bearing (S)-α- and (S)-β-methyl-substituted triethyleneglycol (TEG) side chains, respectively, and examined their conformations in solution. Both polymers exhibit strong, solvent polarity-dependent circular dichroism spectra, which indicated that they take helical conformations in low-polarity solvents. The spectra were mirror images, depending on the chiral position of the side chains. Thus, the polyamide α-DPA bearing (S)-α-methyl-substituted TEG groups takes a left-handed helical conformation, while the polyamide β-DPA with (S)-β-methyl-substituted TEG groups takes a right-handed helical conformation. The difference in the screw sense of α-DPA and β-DPA would be caused by the steric interaction between the main chain and the side chain, as observed in poly(p-benzamide) possessing (S)-β-methyl-substituted TEG side chains (β-PA) because the large cavity of the helical structure of DPA would disturb the solvophobically induced helical folding. Detailed conformational analyses of the oligoamides 6-12 with β-methyl-substituted TEG groups were conducted. Theoretical calculations indicated that the oligoamides with β-methyl-substituted TEG groups exist in a helical conformation with a cavity of 7 Å in diameter. The 1H NMR spectra of the oligomers revealed interactions with small anions such as chloride and acetate anions and with pyridinium cations.

Novel Silicon Phthalocyanines Bearing Triethylene Glycol Groups: Photophysical and Photochemical Properties as well as pH-Induced Spectral Behaviour.

Herein, novel silicon (IV) phthalocyanines peripherally substituted by triethylene glycol groups and bearing axial hydroxyl groups were synthesized and fully characterized by using different analyses techniques. The photophysical and photochemical properties of octa (2a) and tetra (2b) derivatives were investigated in DMF and DMSO. The effect of octa or tetra substitution on fluorescence quantum yield, singlet oxygen generation and photodegradation were examined, and the differences were evaluated regarding their potential efficiency in photodynamic therapy (PDT). Their pH-responses were investigated to determine the influence of protonation of azomethine nitrogen atoms on singlet oxygen generation efficiencies. Dramatic optical changes were observed by protonation of azomethine bridges of 2a and 2b. They exhibited signal decrease from pH4.0 to 1.0 for 2a (pKa=2.6) and pH3.0 to 1.0 for 2b (pKa=1.8). Besides, the compounds exhibited no aggregation tendency, moderate fluorescence quantum yield, solubility in common organic solvents, high singlet oxygen quantum yield and high photostability in DMF and in DMSO, these favorable properties making them good candidates as photosensitizer for PDT.

Synthesis, Photophysical and Photochemical Properties of a Set of Silicon Phthalocyanines Bearing Anti-Inflammatory Groups.

In this study, a series of novel silicon (IV) phthalocyanines conjugated axially with anti-inflammatory (sulindac) and triethylene glycol groups has been synthesized. Different synthetic strategies were attempted to obtain the targeted molecules in high yield. The compounds were fully characterized by using different analyses techniques. Our objectives were to generate a system with sulindac group which enhances the singlet oxygen generation and exhibits anti-cancer effect. Therefore, photophysical and photochemical properties of these compounds were investigated in different solvents. The substituent effect on fluorescence quantum yield and singlet oxygen generation was evaluated for efficiency in photodynamic therapy (PDT) as photosensitizer. The molecules exhibited no aggregation tendency, solubility in common organic solvents, high singlet oxygen quantum yield and high photostability in DMSO so these favourable properties make them good candidates as photosensitizer for PDT. In addition, their stabilities were investigated in DMSO, THF, acetonitrile and DMF.

Photoinduced macroscopic morphological transformation of an amphiphilic diarylethene assembly: reversible dynamic motion.

Self-assembled microstructures of an amphiphilic diarylethene featuring an alkyl chain and triethylene glycol groups showed a photoinduced reversible morphological change in water. Reversible photoisomerization of the core diarylethene gave rise to a reversible morphological transformation between colorless microspheres and colored fibers. When colorless microspheres were irradiated with UV light, colored fibers were formed, and when the colored fibers were irradiated with visible light, the spheres were restored to their original positions where the spheres originally existed. This system showed reversible morphological change through not only photoirradiation but also temperature change. These behaviors can be interpreted as a phase transition between the sphere and fiber states. The dynamic process of the phase transition was monitored by polarized optical microscopy (POM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). It was revealed that the formation of fibers upon UV irradiation occurred radially at the surface of the sphere and the formation of the spheres upon visible-light irradiation occurred at the middle of the fiber. The unique photoinduced mechanical motion provides useful information for the design of sophisticated photoactuators.

“Single–Single” Amphiphilic Janus Dendrimers Self-Assemble into Uniform Dendrimersomes with Predictable Size

An accelerated modular synthesis of six libraries containing 29 amphiphilic Janus dendrimers, employed to discover and predict functions via primary structures, is reported. These dendrimers were constructed from a single hydrophobic and a single hydrophilic dendron, interconnected with l-Ala to form two constitutional isomeric libraries, with Gly to produce one library, and with l-propanediol ester to generate two additional constitutional isomeric libraries. They are denoted "single-single" amphiphilic Janus dendrimers. Assemblies obtained by injection of their ethanol solution into water were analyzed by dynamic light scattering and cryogenic transmission electron microscopy. A diversity of complex structures including soft and hard dendrimersomes, cubosomes, solid lamellae, and rod-like micelles were obtained in water. It was discovered that the "single-single" amphiphilic Janus dendrimers containing three triethylene glycol groups in the hydrophilic dendron favored the formation of dendrimersomes. Assemblies in bulk analyzed by differential scanning calorimetry and powder X-ray diffraction revealed that the amphiphilic Janus dendrimers with melting point or glass transition below room temperature self-assemble into soft dendrimersomes in water, while those with higher temperature transitions produce hard assemblies. In the range of concentrations where their size distribution is narrow, the diameter of the dendrimersomes is predictable by the d-spacing of their assemblies in bulk. These results suggested the synthesis of Library 6 containing two simpler constitutional isomeric benzyl ester based amphiphilic Janus dendrimers that self-assemble in water into soft dendrimersomes and multidendrimersome dendrimersomes with predictable dimensions.

Interface Engineering to Enhance the Efficiency of Conventional Polymer Solar Cells by Alcohol-/Water-Soluble C60 Materials Doped with Alkali Carbonates

Two new C60-based n-type materials, EGMC-OH and EGMC-COOH, functionalized with hydrophilic triethylene glycol groups (TEGs), have been synthesized and employed in conventional polymer solar cells. With the assistance of the TEG-based surfactant, EGMC-OH and EGMC-COOH can be dissolved in highly polar solvents to implement the polar/nonpolar orthogonal solvent strategy, forming an electron modification layer (EML) without eroding the underlying active layer. Multilayer conventional solar cells on the basis of ITO/PEDOT:PSS/P3HT:PC61BM/EML/Ca/Al configuration with the insertion of the EGMC-OH and EGMC-COOH EML between the active layer and the electrode have thus been successfully realized by cost-effective solution processing techniques. Moreover, the electron conductivity of the EML can be improved by incorporating alkali carbonates into the EGMC-COOH EML. Compared to the pristine device with a PCE of 3.61%, the devices modified by the Li2CO3-doped EGMC-COOH EML achieved a highest PCE of 4.29%. Furthermore, we demonstrated that the formation of the EGMC-COOH EML can be utilized as a general approach in the fabrication of highly efficient multilayer conventional devices. With the incorporation of the EGMC-COOH doped with 40 wt % Li2CO3, the PCDCTBT-C8:PC71BM-based device exhibited a superior PCE of 4.51%, which outperformed the corresponding nonmodified device with a PCE of 3.63%.

The Influence of Linker Geometry in Bis(3‐hydroxy‐N‐methyl‐pyridin‐2‐one) Ligands on Solution Phase Uranyl Affinity

Seven water-soluble, tetradentate bis(3-hydroxy-N-methyl-pyridin-2-one) (bis-Me-3,2-HOPO) ligands were synthesized that vary only in linker geometry and rigidity. Solution-phase thermodynamic measurements were conducted between pH 1.6 and pH 9.0 to determine the effects of these variations on proton and uranyl cation affinity. Proton affinity decreases by introduction of the solubilizing triethylene glycol group as compared to unsubstituted reference ligands. Uranyl affinity was found to follow no discernable trends with incremental geometric modification. The butyl-linked 4 li-Me-3,2-HOPO ligand exhibited the highest uranyl affinity, consistent with prior in vivo decorporation results. Of the rigidly-linked ligands, the o-phenylene linker imparted the best uranyl affinity to the bis-Me-3,2-HOPO ligand platform.

Controlling nonspecific protein adsorption in a plug-based microfluidic system by controlling interfacial chemistry using fluorous-phase surfactants.

Control of surface chemistry and protein adsorption is important for using microfluidic devices for biochemical analysis and high-throughput screening assays. This paper describes the control of protein adsorption at the liquid-liquid interface in a plug-based microfluidic system. The microfluidic system uses multiphase flows of immiscible fluorous and aqueous fluids to form plugs, which are aqueous droplets that are completely surrounded by fluorocarbon oil and do not come into direct contact with the hydrophobic surface of the microchannel. Protein adsorption at the aqueous-fluorous interface was controlled by using surfactants that were soluble in fluorocarbon oil but insoluble in aqueous solutions. Three perfluorinated alkane surfactants capped with different functional groups were used: a carboxylic acid, an alcohol, and a triethylene glycol group that was synthesized from commercially available materials. Using complementary methods of analysis, adsorption was characterized for several proteins (bovine serum albumin (BSA) and fibrinogen), including enzymes (ribonuclease A (RNase A) and alkaline phosphatase). These complementary methods involved characterizing adsorption in microliter-sized droplets by drop tensiometry and in nanoliter plugs by fluorescence microscopy and kinetic measurements of enzyme catalysis. The oligoethylene glycol-capped surfactant prevented protein adsorption in all cases. Adsorption of proteins to the carboxylic acid-capped surfactant in nanoliter plugs could be described by using the Langmuir model and tensiometry results for microliter drops. The microfluidic system was fabricated using rapid prototyping in poly(dimethylsiloxane) (PDMS). Black PDMS microfluidic devices, fabricated by curing a suspension of charcoal in PDMS, were used to measure the changes in fluorescence intensity more sensitively. This system will be useful for microfluidic bioassays, enzymatic kinetics, and protein crystallization, because it does not require surface modification during fabrication to control surface chemistry and protein adsorption.

Oriented Binding of the His6-Tagged Carboxyl-Tail of the L-type Ca2+ Channel α1-Subunit to a New NTA-Functionalized Self-Assembled Monolayer

Oriented stable binding of functional proteins on surfaces is of fundamental interest for receptor/ligand studies in atomic force microscopy (AFM) and surface plasmon resonance (SPR) experiments. Here we have chosen the His6-tagged carboxyl-tail (C-tail) of the alpha1c-subunit of the L-type Ca2+ channel and calmodulin (CaM) as its cognitive partner as a model system to develop a new functional surface. Covalently attached self-assembled monolayers on ultraflat gold containing NTA-thiols to which the His6-tagged C-tail was bound and thiols with triethylene-glycol groups as matrix-thiols represented the system of choice. The topography of this surface was characterized using AFM; its ability to bind C-tail proteins oriented and stable was confirmed by SPR measurements and by complementary force spectroscopy experiments with a CaM4-construct covalently attached to the tip. The developed anchoring strategy can now be used to study receptor/ligand interactions in general applying force spectroscopy and SPR on His6-tagged proteins oriented immobilized onto this new NTA-functionalized self-assembled monolayer.

Synthesis and pairing properties of oligoribonucleotide analogues containing a metal-binding site attached to beta-D-allofuranosyl cytosine.

A method for the facile preparation of oligoribonucleotide analogues containing beta-d-allofuranosyl nucleosides with additional functional groups tethered to the 6'-O positions is presented. It is based on the synthesis of two protected nucleosides carrying a 6'-O -bromopentyl and a 6'-O -methylaminopentyl substituent. By a simple two-step procedure, these key intermediates were transformed into two phosphoramidites carrying a 1-aza-18-crown-6 and a triethyleneglycol group, respectively, each capable of complexing metal ions. By automated synthesis, these functionalized nucleoside analogues were efficiently incorporated into short oligoribonucleotides. Under physiological conditions (150 mM NaCl, 2 mM MgCl2, pH 7.4), incorporation of a single allofuranosyl cytosine substituted with a triethyleneglycol moiety led to a significant enthalpic stabilization of an A-type RNA duplex. This observation is in agreement with a metal ion-mediated stabilizing interaction between the two pairing strands.

The Structure of the Mixed Nonionic Surfactant Monolayer of Monododecyl Triethylene Glycol and Monododecyl Octaethylene Glycol at the Air–Water Interface

The structure of the mixed nonionic surfactant monolayer of monododecyl triethylene glycol and monododecyl octaethylene glycol adsorbed at the air–water interface has been determined using specular neutron reflection. Using partial isotopic labeling (deuterium/hydrogen) of the alkyl and ethylene oxide chains of each type of molecule, the distribution and relative positions of those labeled fragments have been obtained. The frustration caused by the packing of the triethylene and octaethylene glycol headgroups results in a change of the surfactant structure compared to the pure monolayer of either surfactant. Compared to the pure monolayer the alkyl chain distributions of both surfactants are more extended, the triethylene glycol group is less hydrated, and the octaethylene glycol group is less extended and more hydrated.

Solubilizing Acid‐Labile Peptide Protecting Groups

Work with peptides can be facilitated by a new protecting group. It combines the structural characteristics and properties of triethylene glycol groups (solubilization) and tert-butyl groups (acid lability).