Radical Trapping Research Articles

Advancing the eradication of harmful dyes through stereolithography-produced 3D floating photocatalysis: Exploiting the synergistic potential of graphene/MnO2/Fe3O4 hybrid nanomaterials

The utilization of heterogeneous photocatalysis for the breakdown of organic pollutants in wastewater has become increasingly popular as an alternative treatment method, offering rapid mineralization of organic compounds. However, the challenges lie in the recycling and recovery processes. To overcome this hurdle, a novel 3D-printed hybrid photocatalyst composed of graphene/MnO2/Fe3O4 was developed through an ex-situ approach. Comprehensive property evaluations were conducted, and the catalyst was employed in the creation of a 3D photocatalyst designed for MB dye removal under direct sunlight, facilitating the easy separation of the used catalyst. Further enhancement of its photocatalytic activity was achieved through carbonization, rendering it promising for wastewater treatment owing to its ordered structure and facile recovery. Notably, the developed 3D photocatalyst exhibited a significant improvement in MB dye degradation compared to powder samples. It showcased effective degradation of 10 ppm of MB dye within a mere 120 min of sunlight exposure. Radical trapping analysis indicated that the high photocatalytic degradation was predominantly attributed to the photogenerated superoxide radicals. Consequently, the 3D printed photocatalyst demonstrated exceptional reusability and sustained efficiency in MB dye degradation without any discernible decrease in catalytic activity. The augmented photocatalytic degradation was governed by the generation of photogenerated charge carriers through reduction and oxidation reactions. This research holds promise for the creation of an economical, user-friendly, and highly efficient 3D printed hybrid photocatalyst with synergistic applications in water purification.

Arone-containing cyclomatrix-type polyphosphazene hybrid microspheres for epoxy resin: Enhancing fire safety and mechanical properties

Arone-containing cyclomatrix-type polyphosphazene hybrid microspheres (PZK) were synthesized to enhance both the fire safety and mechanical performance of epoxy resin (EP). The chemical structure and micro-morphology of PZK were characterized using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy, and X-ray photoelectron spectroscopy. Subsequently, PZK was employed in fabricating EP thermosets. Thermal properties of the PZK modified EP thermosets were comprehensively assessed through thermalgravimetric analysis (TGA) and dynamic mechanical analysis. The results indicate that PZK endowed EP with enhanced char yield and storage modulus, attributed to its exceptional thermal stability and distinctive microsphere structure. Additionally, with only a 1.5% loading of PZK, EP achieved a UL-94 V-1 rating during vertical flame testing, accompanied by an increased limiting oxygen index of 28.3%. Additional analysis with a cone calorimeter demonstrated that the addition of PZK markedly reduced the peak heat release rate, total heat release, fire growth rate, and total smoke production of EP, indicating notable efficacy in suppressing heat and smoke release. Char residue and pyrolysis products were analyzed using SEM, TG-FTIR, and pyrolysis gas chromatography-mass spectrometry, revealing that PZK effectively inhibits the release of combustible gases from EP during thermal decomposition. The expected generation of Ph—O• radicals from arone units in PZK suggested a gaseous free radical trapping mechanism. The phosphazene framework played a crucial role in forming condensed-phase char due to its exceptional thermal stability. Consequently, PZK exhibited a typical biphasic flame-retardant mechanism for EP. Notably, the study observed that the introduction of PZK simultaneously enhances the tensile strength, flexural strength, and modulus of EP, with a particularly significant improvement observed in impact strength. This research expands the scope of investigation into the preparation and flame-retardant application of cyclomatrix-type polyphosphazene hybrid microspheres in polymers.

Mo-modified BiOI0.5Cl0.5 composites preparation for antibiotic removal

Photocatalytic technology has the advantages of high efficiency, mild reaction conditions, low cost, and minimal secondary contamination in antibiotic degradation. Bismuth oxyhalides(BiOX) has garnered considerable attention and application as a photocatalyst, due to its suitable band gap and light capture capability. In this study, we successfully synthesized the BiOI0.5Cl0.5 (BCI) material through hydrothermal treatment. Furthermore, Molybdenum (Mo) atoms were diffused into the composite to form Mo-doped Mo@BiOI0.5Cl0.5. Various techniques were employed to characterize the structures, chemical compositions, and morphologies of the obtained materials.The photocatalytic performance of the obtained materials was investigated, revealing that MBCI-3 exhibited superior performance in the photocatalytic degradation of contaminants. Over a span of 20 min, 100% of rhodamine B and 86.0% of tetracycline were successfully removed from water. The enhancement in photocatalytic performance can be attributed to the alteration in the band gap of the BCI complex, leading to improved light absorption, while the incorporation of Mo atoms expedites electron transfer. Finally, the role of h+ and O2•- radicals in photocatalytic degradation was verified through radical trapping experiments.

Oxidative Cascade Iodocyclization of 1,n-Dienes: Synthesis of Iodinated Benzo[b]azepine and Benzo[b]azocine Derivatives.

An oxidative cascade iodocyclization of 1,7- or 1,8-dienes has been realized under mild conditions. By employing I2 as an iodine source, this protocol provides a concise and efficient approach to a great deal of biologically significant iodinated benzo[b]azepine and benzo[b]azocine derivatives in moderate to good yields. The gram-scale synthesis and further transformation of products render the approach practical and attractive. Radical trapping and deuterium-labeling experiments help to understand the mechanism.

A Novel Bismuth‐Rich Bi3O4Cl/BixOyIz Composite with Intensified Photocatalytic Internal Electrical Field for Photocatalytic Degradation of Antibiotics

The enhancement of photocatalytic semiconductor degradation performance through a bismuth‐rich strategy and heterojunction engineering is considered a very effective approach. Herein, the bismuth‐rich Bi3O4Cl/BixOyIz composites are synthesized through a simple solvothermal reaction. The composites have an internal electric field because of their specific layered structure. Due to the difference between their covalent [BixOy]2+ layer and exchangeable halogen ion layer, the enhanced internal electric field facilitates electron transfer at the high‐quality interface of the semiconductor. The trace presence of Bi3O4Cl/BixOyIz (0.1 g L−1) can achieve an 88% removal of tetracycline (20 mg L−1) from the solution phase under visible light illumination in 120 min. The photocatalytic activity is much higher than that of pure BiOCl and BiOI. Furthermore, the material also exhibits high photocatalytic degradation performance for bisphenol A, doxycycline hydrochloride, etc. The excellent results further confirm the application range of the prepared photocatalysts. The superior photocatalytic activity of Bi3O4Cl/BixOyIz is attributed to the formation of a heterojunction and the generation of an internal electric field, which enhances charge separation and oxidation ability. Photoelectrochemical characterization can confirm the above views. Free radical trapping experiments and electron spin resonance show that heterojunctions can produce abundant •O2− and •OH under visible light irradiation.

BiOBr/Cu2S p-n heterojunction for efficient photodegradation of ciprofloxacin and tetracycline under visible light

With the increasing needs of people for a better life, the problem of water resources pollution has attracted wide attention. The construction of p-n heterojunction is an effective strategy to promote the removal of pollutants by photocatalysts. In this work, a series of BiOBr/Cu2S heterojunction photocatalysts with mass ratios of Cu2S have been synthesized successfully by a hydrothermal method combined with grinding method for photocatalytic degradation of tetracycline (TC) and ciprofloxacin (CIP). The results showed that BiOBr/Cu2S exhibited superior photodegradation efficiency of TC and ciprofloxacin CIP than BiOBr and Cu2S monomers. When the mass ratio of Cu2S is 0.15 %, the visible degradation of CIP and TC are 79.2 % in 90 min and 88.5% in 60 min. In addition, the effects of different inorganic ions and pH value on the photocatalytic performance of BiOBr/Cu2S were investigated. It was proved that superoxide free radical (•O2-) was the main active species by free radical trapping experiment. The photocatalytic degradation process was further evaluated by total organic carbon and mass spectrometry tests. This work provides a feasible construction strategy for photocatalysts with potential application in water resources pollutants.

Enantioselective domino alkyl arylation of vinyl phosphonates by combining photoredox and nickel catalysis

A nickel/photoredox mediated asymmetric domino alkyl arylation of vinyl phosphonates to generate a diverse array of enantioenriched α-aryl phosphonates is disclosed. This asymmetric three-component difunctionalization couples aryl halides and alkyl bromides with vinyl phosphonates, exhibiting excellent chemo- and regioselectivity under mild reaction conditions. The method avoids the need for pre-formed organometallics and phosphorus halides. Mechanistic and DFT studies suggest that photoexcited [4CzIPN]* oxidizes diethyl 1,4-dihydro-2,6-dimethyl-3,5-pyridinedicarboxylate (HEH) to generate the [4CzIPN]•–, which then reduces the alkyl bromide to form alkyl radicals that undergo Giese addition to the vinyl phosphonate. At the same time, Ni0 oxidatively adds the aryl bromide followed by enantiodetermining oxidative radical trapping of the phosphonate-based radical by the tetrahedral NiII center followed by reductive elimination. Independent gradient model based on Hirshfeld partition (IGMH) analysis suggests that the orientation of the phosphonate group (P=O…π interaction) is expected to play an essential role in controlling the enantioselectivity.

Waste to worth: Facile preparation of CaO2 derived from oyster shells for highly efficient degradation of organic contaminants based on Fenton-like system

In recent years, CaO2 has been frequently used as a substitute for H2O2 to address the limitations of H2O2. However, commercially available CaO2 are facing the shortcomings of low purity and limited preparation conditions. Oyster shells can provide superior and abundant biomass calcium element with low cost for developing CaO2. In this work, highly purified CaO2 functional biomaterials were prepared via a facile approach derived from waste oyster shells, which were applied in a Fenton-like system to remove organic pollutants. Experimental results indicated that the oyster shells-derived CaO2 with 100% purity exhibited a greatly enhanced catalytic performance compared with other CaO2 materials in Fenton-like catalytic degradation of organic pollutants, which can be completely removed within 60 s. The high purity of CaO2 would facilitate the release of H2O2 during the Fenton-like catalytic reaction and promote the generation of more active species to oxidize pollutants. Besides, the abundant trace metal elements originated from oyster shells can further motivate the Fenton-like reaction and accelerate the degradation of pollutants, endowing oyster shells-derived CaO2 an excellent catalytic activity. Furthermore, the Fenton-like catalytic mechanism was proposed on basis of tests of radicals trapping and electron spin resonance, validating the vital roles of ⋅OH, ⋅O2– and 1O2 generated throughout the reaction process. This work not only provides a novel and low-cost approach to exploit CaO2 with highly efficient catalytic ability, but also realizes the effective resource utilization of waste shells.

A flame‐retardant, dendrite‐inhibiting sandwich separator prepared by electrospinning for high‐performance and safety lithium batteries

AbstractAs the “safety switch” of lithium batteries, the separator controls the electrochemical performance and safety performance of lithium batteries. However, highly flammable and easy to induce lithium dendrite generation of commercial polyolefin pose a huge safety hazard for current commercial lithium‐ion batteries. Therefore, developing a flame‐retardant, lithium dendrite‐inhibiting separator can achieve further leap in the lithium battery industry. A “sandwich” separator (SPS‐B) is designed by integrating silk fibroin (SF), decabromodiphenyl ethane, and polyvinyl alcohol through electrospinning. SPS‐B shows excellent flame‐retardant properties through a free radical trapping mechanism. Moreover, the SPS‐B demonstrated satisfactory capability of suppressing lithium dendrites by constructing Li3N‐SEI with high ionic conductivity and high strength, and the secondary structure β‐sheets of SF can inhibit the “tip effect” of lithium dendrites, which enables efficient lithium plating/stripping in Li//Li and Li//Cu cells. In addition, the enhanced porosity, electrolyte affinity of SPS‐B promotes excellent electrochemical performance with enhanced discharge capacity and reduced concentration polarization. Finally, fire risk of soft‐pack batteries are evaluated by continuous external heating. Compared with commercial separator, soft‐pack batteries with SPS‐B show much lower heat release rate, peak temperature and flue gas release rate, further confirming the effectiveness of SPS‐B in reducing fire risk. Overall, the SPS‐B provides a satisfactory way to develop high‐performance and superior safety lithium batteries.

Construction of a direct Z-scheme Cs3Bi2Cl9/g-C3N4 heterojunction composite for efficient photocatalytic degradation of various pollutants in water: Performance, kinetics and degradation mechanism

The use of emerging composite materials has been booming to remove environmental pollutants. The aim of this research is to develop a new composite based on Cs3Bi2Cl9 perovskite and graphitic carbon nitride (g-C3N4) to investigate the photocatalytic performance under visible light irradiation. To achieve this, we produce the Cs3Bi2Cl9/g-C3N4 heterojunctions through a simple self-assembly synthesis. The as-synthesized composites are characterized using XRD, FTIR, FESEM, TEM, BET and EDX techniques. The photocatalytic performance of Cs3Bi2Cl9/g-C3N4 is examined in the degradation of various water contaminants, including 4-nitrophenol (4-NP), tetracycline antibiotic (TC), methylene blue (MB) and methyl orange (MO). The experimental results indicate the superior photocatalytic performance of the composites in the degradation of pollutants compared to pure Cs3Bi2Cl9 and g-C3N4. The 10% Cs3Bi2Cl9/g-C3N4 composite achieves the optimal degradation efficiency of 100, 92, 98.7, and 85.1% of 4-NP, TC, MB, and MO, respectively. This superior photocatalytic activity attributes to improved optical and electrochemical properties, including enhanced absorption ability, narrowing band gap, promoted separation efficiency of photogenerated carriers, and a high redox potential, which is confirmed by UV–vis DRS, PL, EIS, and CV analyses. The 10% Cs3Bi2Cl9/g-C3N4 composite also demonstrates high photocatalytic stability after four consecutive cycles. Radical trapping tests show that superoxide radicals (•O2−), holes (h+), and hydroxyl radicals (•OH) contribute to the photocatalytic process. Based on the obtained data, a direct Z-scheme heterojunction mechanism is proposed. Overall, this research offers a new stable photocatalyst with excellent prospect for photocatalytic applications.

Syntheses and photochemically antibiotic degradation of two Co(II)-based coordination polymers

Two new Co(II)-based coordination polymers (CPs), designated as [Co2(bbp)4(1,3-bdc)4]n(1) and [Co(bbp)3(NO3)2(H2O)]n(2) (bbp = 3,5-bis(benzoimidazo-1-ly) pyridine; 1,3-H2bdc = 1,3-benzenedicarboxy acid), were synthesized using a dual ligand approach. The characterization of these CPs involved single- crystal -XRD, UV–visible, FT-IR, and TGA analysis. Both CPs 1 and 2 exhibit a distorted octahedral geometry. Both 1 and 2 show a 1D ladder chain, and this chain-like structure undergoes further development into a more intricate two-dimensional (2D) supramolecular network. The thermal stability analysis revealed that 1 and 2 are stable at temperatures of 119 °C and 286 °C, respectively, with no significant mass loss. Notably, both CPs displayed semiconducting properties. The photocatalytic degradation capabilities of CPs 1 and 2 were investigated against antibiotics such as metronidazole (MDZ), Tinidazole (TDZ), ornidazole (ODZ), and furazolidone (FZD). CP 1 exhibits exceptional photocatalytic activity against FZD. A dosage of 5 mg/L of CP 1 resulted in a remarkable degradation efficiency of 92.2 % for 40 ppm FZD. Additionally, a proposed photodegradation mechanism was investigated through radical trapping experiments.

Antioxidant Activity of Bilirubin in Micellar and Liposomal Systems Is pH-Dependent.

Bilirubin (BR), a product of heme catabolism, plays a critical role in biological systems. Although increased levels of BR result in hyperbilirubinemia or jaundice, there is increasing evidence that lower concentrations substantially decrease the risk of oxidative stress-mediated diseases due to antioxidant functions of BR. We studied the radical-trapping ability of BR in two model systems, micellar and liposomal, at a broad pH range. At pH < 6.0, BR behaves as a retardant; however, at pH ≥ 6.0, BR becomes strong radical trapping antioxidant, with rate constants for reaction with lipidperoxyl radicals (kinh) within the range from 1.2 × 104 M-1 s-1 to 3.5 × 104 M-1 s-1, and in liposomal system, the activity of BR is comparable to α-tocopherol. This transition is likely facilitated by the ionization of carboxyl groups, leading to a conformational shift in BR and improved solubility/localization at the water/lipid interface. This is the first experimental evidence of the role of pH on the antioxidant activity of bilirubin, and the observed pH-dependent radical-trapping ability of BR holds practical significance, particularly in jaundice treatment where light therapy targets the skin's weakly acidic surface. Minor adjustments toward neutral or alkaline pH can enhance radical-trapping action of BR, thereby mitigating oxidative stress induced with blue or violet light exposure.

Synergistic degradation of formaldehyde and chlorophenols in N-CQDs/BiOBr photocathode-coupled microbial fuel cells and the enhancement of power production efficiency

p-Chlorophenol (4-CP) is a recalcitrant pollutant with high toxicity that bioaccumulates and persists in the environment. In order to remove most of 4-CP in a short time, this study constructed an N-CQDs/BiOBr photocatalytic cathode microbial fuel cell (PMFCs) system, introduced formaldehyde wastewater into the biological anode, and enhanced the electronic interaction between the cathode and anode, thus realizing the high efficiency of the degradation of 4-CP and the production of electric energy. The results showed that the removal rate of 4-CP (30 mg/L) by PMFCs was 86.8%, which was higher than that of MFC (65%) and photocatalysis (11.73%) combined, showing a good synergistic effect. In addition, driven by the continuous negative bias provided by the anode, the electrons generated at the anode preferentially combine with the photogenerated holes at the cathode, which increases the power generation of the PMFCs, and achieves a maximum power density of 286.225 W/ m2 and a maximum open-circuit voltage of 0.518 V. The electrochemical properties of PMFCs were characterized by cyclic voltammetry and electrochemical impedance spectroscopy, and the results showed that the charge transfer resistance of PMFCs was only half that of MFC. Free radical trapping experiments have confirmed that ∙O2- is the main reactive oxidizing substance. Subsequently, a possible electron transport mechanism was proposed, and five degradation pathways of 4-CP were identified using liquid chromatography-mass spectrometry. In conclusion, this technology is a good alternative method to improve the treatment efficiency of refractory wastewater in practical applications.

Improving Photocatalytic Performance through Incorporation of Various Cations in A-site of Double Perovskite Material (Cs0.50MA0.50)2SnI6 for Degradation of Methylene Blue Dye Pollutant under Visible Light Irradiation

In this article, undoped double perovskite materials like caesium tin iodide (Cs2SnI6), methyl ammonium tin iodide [MA2SnI6: MA denotes CH3NH3+] and mixed double perovskite material [(Cs0.50MA0.50)2SnI6] were synthesized using a wet chemical methodology. The crystal structure confirmation, optical properties, thermal properties, surface morphology and presence of elemental composition of the prepared samples using XRD, UV, TGA and FESEM-EDAX analyses were thoroughly investigated. The synthesized materials were employed as photocatalysts to degrade methylene blue dye within 120 min under visible light. An increase in the optical properties of the synthesized double perovskite materials was confirmed by ultraviolet (UV) analysis, which showed that the introduction of various cations into the perovskite material at the A-site shifted the photoluminescence (PL) emission peak to the red. TGA results demonstrated that (Cs0.50MA0.50)2SnI6 has greater thermal stability, which was confirmed by the presence of 43% of sample despite the temperature reaching almost 870 ºC. Doped double perovskite material (Cs0.50MA0.50)2SnI6 exhibited increased photocatalytic activity, with methylene blue dye degradation efficiency attaining 89% after 120 min of visible light irradiation, which is greater than pure double perovskite materials. The photocatalytic degradation of methylene blue dye is mostly facilitated by hydroxyl radicals and holes, according to a radical trapping experiment that we conducted by employing different scavengers. The results of the current work showed that doped double perovskite materials [(Cs0.50MA0.50)2SnI6] exhibit high thermal stability as well as higher photocatalytic activity than pure double perovskite materials. A possible photocatalytic reaction process is also diagrammatically using the band positions of double perovskite materials found using Mott-Schottky plots , which confirms that the synthesized double perovskite material has an N-type semiconductor nature.

Copper-Catalyzed Radical Relay 1,3-Carbocarbonylation across Two Distinct C═C Bonds.

The radical relay provides an effective paradigm for intermolecular assembly to achieve functionalization across remote chemical bonds. Herein, we report the first radical relay 1,3-carbocarbonylation of α-carbonyl alkyl bromides across two separate C═C bonds. The reaction is highly chemo- and regioselective, with two C(sp3)-C(sp3) bonds and one C═O bond formed in a single orchestrated operation. In addition, the synthesis method under mild conditions and using inexpensive copper as the catalyst allows facile access to structurally diverse 1,3-carbocarbonylation products. The plausible mechanism is investigated through a series of control experiments, including radical trapping, radical clock experiments, critical intermediate trapping, and 18O labeling experiment.

Enhanced visible light photocatalytic degradation of dyes by the oxygen-rich vacancy-assisted S-scheme heterojunction Al2O3/BiOBr: Catalytic mechanism and performance evaluation

A heterojunction Al2O3/BiOBr composite photocatalyst, characterized by an S-scheme structure and enriched with oxygen vacancies, was synthesized through a solvothermal reaction coupled with an in situ growth approach. Oxygen vacancies on the catalyst surface, enhanced by the robust coupling between Al2O3 and BiOBr, were corroborated by X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR). Techniques such as UV–vis diffuse reflectance spectroscopy (DRS), UV photoelectron spectroscopy (UPS), Mott–Schottky characterization, and experimental radical trapping experiments collectively validated the pathways for migrating photogenerated carriers. The interplay between the surface oxygen vacancies and the S-scheme Al2O3/BiOBr heterojunction, which possesses potent redox capabilities, significantly improved the photocatalytic degradation. This enhancement was particularly evident in the outstanding visible photocatalytic degradation performance against rhodamine B (RhB), methyl orange (MO), and basic fuchsin (BF). The synthesized composite photocatalysts demonstrated 92% retention of degradation efficiency after five recycling cycles, indicating their considerable stability.

Enhanced Mechanistic Understanding Through the Detection of Radical Intermediates in Organic Reactions.

Two applications of a radical trap based on a homolytic substitution reaction (SH2') are presented for the trapping of short-lived radical intermediates in organic reactions. The first example is a photochemical cyanomethylation catalyzed by a Ru complex. Two intermediate radicals in the radical chain propagation have been trapped and detected using mass spectrometry (MS), along with the starting materials, products and catalyst degradation fragments. Although qualitative, these results helped to elucidate the reaction mechanism. In the second example, the trapping method was applied to study the radical initiation catalyzed by a triethylboronoxygen mixture. In this case, the concentration of trapped radicals was sufficiently high to enable their detection by nuclear magnetic resonance (NMR). Quantitative measurements made it possible to characterize the radical flux in the system under different reaction conditions (including variations of solvent, temperature and concentration) where modelling was complicated by chain reactions and heterogeneous mass transfer.

Enhanced piezo-catalytic performance of BaTiO3 nanorods combining highly exposed active crystalline facets and superior deformation capability: Water purification and activation mechanism

Using piezoelectric materials for advanced oxidation is a green and viable means of water purification and environmental restoration. However, unmodified piezoelectric catalysts exhibited unsatisfactory catalytic performance, which had become a bottleneck for the practical application of piezoelectric catalysis. In this work, piezoelectric responsiveness and exposed active crystal surface area were rationally coordinated by synthesizing one-dimensional BaTiO3 nanorods (BTO NRs). Enhanced piezo-responsivity enables faster free charge carriers transfer, while the highly exposed area of the (001) facets provides more active sites for piezo-catalytic reactions. Consequently, BTO NRs degraded RHB (Rhodamine B) and TC (Tetracycline) with first-order rate constants of 0.018 min−1 and 0.012 min−1, respectively, 5 times higher than BaTiO3 nanoparticles. The specific active sites on the (001) crystal plane were further investigated through a combination of DFT calculations, free radical trapping experiments, and XPS analysis. Ti4+ adsorbs and activates water molecules to generate Ti3+ and •OH, in the catalytic reaction. Afterward, Ti3+ is oxidized to Ti4+ by piezo-holes (holes driven by piezoelectric potential), while •OH is desorbed and involved in the degradation of pollutants. This research not only provides an approach to modify piezoelectric catalysts with high catalytic activity but also presents new insights into the mechanism of piezoelectric catalysis from the viewpoint of the atom level.

Integration of Ag2S QDs in 3D Zn3V2O8 nanoflower for visible light driven effective photocatalytic degradation of rifampicin: Insights into preparation, mechanism and by-product toxicity evaluation

Water contamination is regarded as one of the most important concerns in the last decade and its crucial to develop an efficient and productive technique to remediate organic pollutants from waters. Photocatalytic degradation processesare advanced oxidation procedure and a promising technique for the degradation of organic pollutants. In this study, we fabricated Ag2S/Zn3V2O8 nanocomposite (AS/ZVO NCs) for the degradation of rifampicin (RIF) by ultrasonicated co-precipitation strategy. The NCs was optimally synthesized with varying deposition concentrations, among which 5%-Ag2S/Zn3V2O8 (5%-AS/ZVO) exhibited superior photocatalytic activity (95.5%) under visible light irradiation. Moreover, the experiments were conducted at diverse operational parameters such as different NCs dosage, different concentration of RIF, pH, and ions, to investigate the impact on the photocatalytic degradation of RIF. Notably, XRD and XPS results of used 5%-AS/ZVO NCs demonstrated commendable stability and possess sustained integrity in structure after six consecutive cycle tests. The scavenging study and radical trapping experiments confirmed the formation of •OH and O2•- during photocatalytic reaction. The mechanism of photocatalytic degradation of RIF by 5%-AS/ZVO NCs was proposed and the pathway was predicted based on the GC-MS results. The current study provides a comprehensive understanding for designing efficient photocatalysts for the environmental remediation applications.

Synthesis of rGO-Supported NiCo2O4/NiS nanocomposite for effective degradation of diclofenac and bromophenol blue

The removal of organic effluents from polluted water is a significant concern. Photodegradation of organic effluents can be performed using different photocatalysts. For this purpose, herein nickel cobaltite (NC) was prepared via the auto moisturization route and nickel sulfide (NS) via a hydrothermal approach. rGO-based nanocomposite (NC/NS/rGO) was synthesized using an ultrasonication approach. The as-prepared nanocatalysts were employed for bromophenol blue and diclofenac degradation. The outcomes of colored (bromophenol blue) effluent degradation by NC, NS, NC/NS, and NC/NS/rGO was found to be 42.65 %, 33.92 %, 56.19 %, and 81.44 %, respectively. The % degradation of diclofenac by NC/NS and NC/NS/rGO was realized to be 44.05 % and 65.98 %, respectively. NC/NS/rGO showed greater catalytic activity than other fabricated nanocatalysts due to the combined effect of nickel cobaltite and nickel sulfide and the existence of rGO. The rGO layers exhibited immense and active sites for the degradation reaction. A radical trapping analysis was performed to investigate the participation of active species in the photocatalytic reaction.