Transverse Components Research Articles

Spin-Orbit Torque Vector Quantification in Nanoscale Magnetic Tunnel Junctions.

Spin-orbit torques (SOT) allow ultrafast, energy-efficient toggling of magnetization state by an in-plane charge current for applications such as magnetic random-access memory (SOT-MRAM). Tailoring the SOT vector comprising of antidamping (TAD) and fieldlike (TFL) torques could lead to faster, more reliable, and low-power SOT-MRAM. Here, we establish a method to quantify the longitudinal (TAD) and transverse (TFL) components of the SOT vector and its efficiency χAD and χFL, respectively, in nanoscale three-terminal SOT magnetic tunnel junctions (SOT-MTJ). Modulation of nucleation or switching field (BSF) for magnetization reversal by SOT effective fields (BSOT) leads to the modification of SOT-MTJ hysteresis loop behavior from which χAD and χFL are quantified. Surprisingly, in nanoscale W/CoFeB SOT-MTJ, we find χFL to be (i) twice as large as χAD and (ii) 6 times as large as χFL in micrometer-sized W/CoFeB Hall-bar devices. Our quantification is supported by micromagnetic and macrospin simulations which reproduce experimental SOT-MTJ Stoner-Wohlfarth astroid behavior only for χFL > χAD. Additionally, from the threshold current for current-induced magnetization switching with a transverse magnetic field, we show that in SOT-MTJ, TFL plays a more prominent role in magnetization dynamics than TAD. Due to SOT-MRAM geometry and nanodimensionality, the potential role of nonlocal spin Hall spin current accumulated adjacent to the SOT-MTJ in the mediation of TFL and χFL amplification merits to be explored.

Dynamics of stress propagation in anharmonic crystals: MD simulations

Anharmonic inter-atomic potential ∼|x|n , n > 1, has been used in molecular dynamics (MD) simulations of stress dynamics of FCC oriented crystal. The model of the chain of masses and springs is found as a convenient and accurate description of simulation results, with masses representing the crystallographic planes. The dynamics of oscillations of two planes is found analytically to be given by Euler’s beta functions, and its scaling with non-linearity parameter and amplitude of oscillations, or applied shear pressure is discussed on examples of time dependencies of displacements, velocities, and forces acting on masses (planes). The dynamics of stress penetration from the surface of the sample with multiply-planes (an anharmonic crystal) towards its interior is confirmed to be given exactly as a series of Bessel functions, when n = 2 (Schrödinger and Pater solutions). When n ≠ 2 the stress dynamics (wave propagation) in bulk material remains qualitatively of the same nature as in the harmonic case. In particular, results suggest that the quasi-linear relationship between frequency and the wave number is preserved. The speed of the transverse sound component, dependent on sound wave amplitude, is found to be a strongly decreasing function of n. The results are useful in the analysis of any MD simulations under pressure, as they help to understand the dynamics of pressure retarded effects, as well as help design the proper methodology of performing MD simulations in cases such as, for instance, studies of the dynamics of dislocations.

Anisotropic generalized polytropic spheres: Regular 3D black holes

We model gravitating relativistic 3D spheres composed of an anisotropic fluid in which the radial and transverse components of the pressure correspond to the vacuum energy and a generalized polytropic equation-of-state, respectively. By using the generalized Tolman–Oppenheimer–Volkoff (TOV) equation, and solving the complete system of equations for these anisotropic generalized polytropic spheres, for a given range of model parameters, we find three novel classes of asymptotically AdS black hole solutions with regular core. We show the regularity of the solutions using curvature scalars and the formalism of geodesic completeness. Then, using the eigenvalues of the Riemann curvature tensor, we consider the effects of repulsive gravity in the three static 3D regular black holes, concluding that their regular behavior can be explained as due to the presence of repulsive gravity near the center of the objects. Finally, we study the stability of the regular black holes under the flow of the energy through the Cauchy horizon.

Magnetic Anisotropy and Relaxation in Four-Coordinate Cobalt(II) Single-Ion Magnets with a [CoIIO4] Core.

A mononuclear four-coordinate Co(II) complex with a [CoIIO4] core, namely, PPN[Li(MeOH)4][Co(L)2] (1) (PPN = bis(phosphoranediyl)iminium; H2L = perfluoropinacol), has been studied by X-ray crystallography, magnetic characterization, and theoretical calculations. This complex presents a severely distorted coordination geometry. The O-Co-O bite angle is 83.42°/83.65°, and the dihedral twist angle between the O-Co-O chelate planes is 55.6°. The structural distortion results in a large easy-axis magnetic anisotropy with D = -104(1) cm-1 and a transverse component with |E| = +4(2) cm-1. Alternating current (ac) susceptibility measurements demonstrate that 1 exhibits slow relaxation of magnetization at zero static field. However, the frequency-dependent out-of-phase (χ"M) susceptibilities of 1 at 0 Oe do not show a characteristic maximum. Upon the application of a dc field or the dilution with a diamagnetic Zn matrix, the quantum tunneling of magnetization (QTM) process can be successfully suppressed. Notably, after dilution with the Zn matrix, the obtained sample exhibits a structure different from that of the pristine complex. In this altered sample, the asymmetric unit does not contain the Li(MeOH)4+ cation, resulting in an O-Co-O bite angle of 86.05° and a dihedral twist angle of 75.84°, thereby leading to an approximate D2d symmetry. Although such differences are not desirable for magnetic studies, this study still gives some insights. Theoretical calculations reveal that the D parameter is governed by the O-Co-O bite angle, in line with our previous report for other tetrahedral Co(II) complex with a [CoIIN4] core. On the other hand, the rhombic component is found to increase as the dihedral angle deviates from 90°. These findings provide valuable guidelines for fine-tuning the magnetic properties of Co(II) complexes.

Structure-Structure Interaction in the Reinforced Concrete Frames-Wall

Abstract Reinforced concrete frame-wall (RC frame-Wall) structures are generally solved in a global manner by modeling the entire structure by assembling the RC frame and wall stiffness matrices into a global matrix. The bar-wall element interface is modeled at the mean line of the beam-column element, according to RPA 99, which limits the interaction to the axial and transverse components of the forces (mechanical and kinematic) thus neglecting the effects of section rotations. In order to take into account, the rotational components of the mechanical behavior of the beams (section rotation and bending moment), the interaction between the RC frame and the wall must take place at the real interface of the two substructures, i.e. at the extreme fiber of the bar elements (beams and columns). The transmission of force from the wall to the RC frame is done by transforming the tangent stresses of the wall into moment in the beam.

Neutral pion masses within a hot and magnetized medium in a lattice-improved soft-wall AdS/QCD model

We investigate chiral phase transitions and the screening masses, pole masses, and thermal widths of neutral pion mesons with finite temperature T and magnetic field B in a lattice-improved AdS/QCD model, which is constructed by fitting the lattice results of the pseudocritical temperatures Tpc(B). Specifically, we find that the chiral condensate σ undergoes a crossover phase transition demonstrating distinct magnetic catalysis and inverse magnetic catalysis effects in very low- and high-temperature regions with fixed finite B, respectively. For the screening masses, we find that the longitudinal component decreases with B at very low and high temperatures and increases with B near Tpc. The transverse component always increases with B at fixed T. However, both the longitudinal and transverse screening masses increase with T at fixed B. Furthermore, we find that the pole mass decreases with the increase of B or T. It is interesting to note that the thermal width shows similar behavior to the longitudinal screening masses in the very-high-temperature region. Published by the American Physical Society 2024

Additive Manufacturing of Composite Polymers: Thermomechanical FEA and Experimental Study.

This study presents a comprehensive approach for simulating the additive manufacturing process of semi-crystalline composite polymers using Fused Deposition Modeling (FDM). By combining thermomechanical Finite Element Analysis (FEA) with experimental validation, our main objective is to comprehend and model the complex behaviors of 50 wt.% carbon fiber-reinforced Polyphenylene Sulfide (CF PPS) during FDM printing. The simulations of the FDM process encompass various theoretical aspects, including heat transfer, orthotropic thermal properties, thermal dissipation mechanisms, polymer crystallization, anisotropic viscoelasticity, and material shrinkage. We utilize Abaqus user subroutines such as UMATHT for thermal orthotropic constitutive behavior, UEPACTIVATIONVOL for progressive activation of elements, and ORIENT for material orientation. Mechanical behavior is characterized using a Maxwell model for viscoelastic materials, incorporating a dual non-isothermal crystallization kinetics model within the UMAT subroutine. Our approach is validated by comparing nodal temperature distributions obtained from both the Abaqus built-in AM Modeler and our user subroutines, showing close agreement and demonstrating the effectiveness of our simulation methods. Experimental verification further confirms the accuracy of our simulation techniques. The mechanical analysis investigates residual stresses and distortions, with particular emphasis on the critical transverse in-plane stress component. This study offers valuable insights into accurately simulating thermomechanical behaviors in additive manufacturing of composite polymers.

The Quantitative Role of Moisture and Vertical Motion in Shaping Summer Heavy Rainfall over North China under Two Distinct Large-Scale Weather Patterns

Abstract Two distinct categories of weather patterns, denoted as Type 1 and Type 2, which show higher-than-expected frequency of summer heavy rainfall days (HRDs) over North China (NC), are selected from nine weather patterns categorized by the self-organizing map algorithm during 1979–2019. The respective HRDs over NC exhibit dissimilar characteristics, with Type 1 showing a northern distribution and Type 2 a southern distribution. The quantitative disparities in terms of moisture content and vertical motion are discussed in reactions to the synoptic-scale patterns associated with HRDs. The outcomes of a 20-day backward tracking, using the so-called Water Accounting Model-2layers, reveal noteworthy contrasts in moisture sources. Type 1 predominantly receives moisture from the western North Pacific, while Type 2 relies more on contributions from the Arabian Sea, Bay of Bengal, and Eurasia. However, the major moisture sources with grid cells contributing more than 0.01 mm show a consistent cumulative contribution of 77% for Type 1 and 80% for Type 2. The finding suggests that the discrepancy between the two types cannot be solely attributed to moisture supply. Further examination of the transverse and shearwise Q-vector components provides insights into how these distinct weather patterns influence HRDs by the alteration of vertical motion. In Type 1, an upper-level jet entrance induces a thermally direct secondary circulation that enhances vertical motion, while a baroclinic trough plays a dominant role in generating vertical motion in Type 2. Moreover, these unique configurations for each type of weather pattern are not only pre-existing but also intensified during HRDs.

Unlocking the specificity of antimicrobial peptide interactions for membrane-targeted therapies

Antimicrobial peptides (AMPs) are increasingly recognized as potent therapeutic agents, with their selective affinity for pathological membranes, low toxicity profile, and minimal resistance development making them particularly attractive in the pharmaceutical landscape. This study offers a comprehensive analysis of the interaction between specific AMPs, including magainin-2, pleurocidin, CM15, LL37, and clavanin, with lipid bilayer models of very different compositions that have been ordinarily used as biological membrane models of healthy mammal, cancerous, and bacterial cells. Employing unbiased molecular dynamics simulations and metadynamics techniques, we have deciphered the intricate mechanisms by which these peptides recognize pathogenic and pathologic lipid patterns and integrate into lipid assemblies. Our findings reveal that the transverse component of the peptide's hydrophobic dipole moment is critical for membrane interaction, decisively influencing the molecule's orientation and expected therapeutic efficacy. Our approach also provides insight on the kinetic and dynamic dependence on the peptide orientation in the axial and azimuthal angles when coming close to the membrane. The aim is to establish a robust framework for the rational design of peptide-based, membrane-targeted therapies, as well as effective quantitative descriptors that can facilitate the automated design of novel AMPs for these therapies using machine learning methods.

Atmospheric pressure uniform dielectric barrier discharge (DBD) in a wide air gap initiated from a narrow starting point

Generating a uniform non-equilibrium plasma in atmospheric pressure air has always been a challenge. It is believed that the maximum spacing for generating a uniform non-equilibrium plasma in atmospheric pressure air, whether using AC or nanosecond pulse drive, is 4 mm. Discharges are always non-uniform when the spacing is greater than 4 mm. In this paper, we propose a new type of dielectric barrier discharge structure to address this challenge. The left end of the structure rapidly increases the discharge spacing from 0.5 mm to 6 mm, while the right side of the main discharge gap maintains a uniform spacing of 6 mm. Nanosecond pulse voltage is used to drive the plasma, an ICCD camera is used to capture the image of the plasma during a discharge pulse cycle, which indicates that a uniform plasma within the 6 mm spacing of the main discharge gap is generated. Upon further reducing the ICCD camera’s exposure time to 20 ns, it is revealed that the uniform plasma is formed due to the rapid propagation of the plasma from left to right at a speed of order of 105 m s−1. Due to the small transverse component of the external electric field, this rapid propagation behavior cannot be due to the external electric field. Therefore, this paper further proposes the hypothesis of electric dipole formation leading to this fast propagation. The hypothesis suggests that the charge separation on the surface of the anode forms an electric dipole, which generates a local discharge at its right end. This local discharge further triggers the discharge in the main gap, and the main gap discharge, in turn, forms a dipole due to charge separation again, by repeating this cycle, the plasma propagates rapidly to the right. Further analysis demonstrates that this dipole can indeed produce a strong electric field of up to 41 kV cm−1 at its right end, which is sufficient to induce a local discharge. Moreover, under such a strong electric field, the electron migration rate can indeed reach 105 m s−1. These findings support the plausibility of this hypothesis.

Semiclassical approach to spin dynamics of a ferromagnetic S = 1 chain

Abstract Motivated by recent experimental progress on the quasi-one-dimensional quantum magnet NiNb2O6, we study the spin dynamics of an S = 1 ferromagnetic Heisenberg chain with single-ion anisotropy by using a semiclassical molecular dynamics approach. This system undergoes a quantum phase transition from a ferromagnetic to a paramagnetic state under a transverse magnetic field, and the magnetic response reflecting this transition is well described by our semiclassical method. We show that at low temperature the transverse component of the dynamical structure factor depicts clearly the magnon dispersion, and the longitudinal component exhibits two continua associated with single- and two-magnon excitations, respectively. These spin excitation spectra show interesting temperature dependence as effects of magnon interactions. Our findings shed light on the experimental detection of spin excitations in a large class of quasi-one-dimensional magnets.

Vibrational enhancement of evolutionary monochromatic neutron transport

The monochromatic hyperbolic neutron density wave is conceived as a Rayleigh-like wave with mixed transverse and longitudinal components. It is proved for the first time that the absolute ratio of the longitudinal to transverse interfering components, varies, with increasing the frequency of this wave, from zero to 1. Such a limited variation is to be coined as vibrational enhancement of evolutionary one-speed neutron transport.

Investigation of Generalized Fourier and Fick’s Law of Electro-Osmotic MHD Two-Phase Flow of Dusty Hybrid Ferrofluid Through Inclined Microchannel

Numerous industries, including biology and medicine, stand to benefit greatly from the cutting-edge use of electro-osmotic MHD flow of hybrid Ferro fluid via a microchannel. To investigate the electroosmotic MHD flow of a hybrid Ferro fluid with dust particles, we use a microchannel inclined vertically. We also take into account the magnetic field’s transverse component. The impacts of heat and mass transfer within this fluid system are the focus of this investigation. Partial differential equations are a powerful tool for modeling the aforementioned physical phenomena. The classical system is further fractionalized into a nondimensional form by using suitable nondimensional variables, free of dimensions, the generalized Fourier transform, and Fick’s rule. The Caputo derivative is used as a starting point for generalizations. The analytical solutions for the velocity (containing the hybrid Ferro fluid and dusty fluid), temperature, and concentration profiles are obtained using a mixture of Laplace and Fourier methods. The research looks at how things like temperature, stress (Grashof, Schmidt, and Prandtl numbers), and the dusty fluid parameter affect one another. The concentration distributions are analyzed, and graphs are presented to help visualize the results. The average values for the Sherwood number, the heat transfer rate, and the coefficient of skin friction are provided. Notably, the fractional models provide more leeway in finding workable solutions since they are more precise. All things considered, it seems that these strategies are quite beneficial. The hybrid Ferro fluid has the capacity to effectively modify the velocity boundary layer and has a greater heat transfer rate than both nanofluid and conventional fluid.

Coexistence of large anomalous Nernst effect and large coercive force in amorphous ferrimagnetic TbCo alloy films

The anomalous Nernst effect (ANE) has garnered significant interest for practical applications, particularly in energy harvesting and heat flux sensing. For these applications, it is crucial for the module to operate without an external magnetic field, necessitating a combination of a large ANE and a substantial coercive force. However, most materials exhibiting a large ANE typically have a relatively small coercive force. In our research, we have explored the ANE in amorphous ferrimagnetic TbCo alloy films, noting that the coercive force peaks at the magnetization compensation point (MCP). We observed that transverse Seebeck coefficients are amplified with Tb doping, reaching more than 1.0 μV/K over a wide composition range near the MCP, which is three times greater than that of pure Co. Our findings indicate that this enhancement is primarily due to direct conversion, a product of the transverse thermoelectric component and electrical resistivity. TbCo films present several significant advantages for practical use: a large ANE, the capability to exhibit both positive and negative ANE, the flexibility to be deposited on any substrate due to their amorphous nature, a low thermal conductivity, and a large coercive force. These attributes make TbCo films a promising material for advancing ANE-based technologies.

Propagation of focused scalar and vector vortex beams in anisotropic media: A semianalytical approach

In the field of structured light, the study of optical vortices and their vectorial extension—vectorial vortex beams—has garnered substantial interest due to their unique phase and polarization properties, which make them appealing for many potential applications. Combining the advantages of vortex beams and anisotropic materials, unique possibilities for electromagnetic field tailoring and manipulation can be achieved in nonlinear optics, quantum and topological photonics. These applications call for a comprehensive modeling framework that accounts for properties of both anisotropic materials and vector vortex beams. In this paper, we describe a semianalytical model that extends the vectorial diffraction theory to the case of focused vortex beams propagating through a uniaxial slab, considering both the cases of scalar and vectorial vortices in the common framework of a Laguerre-Gaussian mode basis. The model aims to provide a comprehensive description of the methodology, enabling the implementation of complex beam transmission through, reflection from, and propagation in uniaxial anisotropic materials for specific applications. As a demonstration of its versatility, we apply the developed approach to describe propagation of high-order vortex beams in uniaxial materials with various dispersion characteristics, exploring the elliptic, hyperbolic and epsilon-near-zero regimes. We show how variations of the medium anisotropy modify the beam structure due to the vectorial nature of their interaction, which results from the different permittivities of the medium for transverse and longitudinal field components. The applicability of the approach can be extended to artificially structured media if they can be described by effective medium parameters. The developed formalism will be useful for modeling interaction of complex beams with uniaxial materials, allowing a common framework for a large variety of situations, which can also be extended beyond the electromagnetic waves. Published by the American Physical Society 2024

Miniature atom bottle traps enabled by chiral doughnut light

We highlight what we believe to be a novel optical set-up which enables the confinement of cold atoms in a finite set of sub-wavelength bottle traps. This involves two counter-propagating vortex beams with the same winding number ℓ = ±1 and the same circular polarization (. Strong focusing generates significant longitudinal field components which become responsible for an on-axis standing wave enabling the axial confinement of far blue-detuned atoms. The off-axis radial confinement is provided by the optical potential due to the transverse components of the light. The trap characteristics are illustrated using experimentally accessible parameters and are tunable by changing the power, focusing and ellipticity of the light. Atoms trapped in such a set-up are useful for applications, including quantum simulation and quantum information processing.

Corrections to long wavelength approximation of peristalsis viscous fluid flow within a wavy channel

This research paper delves into the pumping phenomenon of peristaltic motion within a wavy, straight channel. Our aim is to provide analytical solutions for the well-established long wavelength and small Reynolds number approximation. To achieve this, we derive third-order corrections to the ideal leading-order solutions. These closed-form solutions encompass the axial and transverse velocity components, pressure rise and axial pressure gradients, and drag force along the wavy channel. Additionally, we elucidate the trapping phenomena of viscous flowing boluses through stream function contours. Notably, these exact solutions enable the analysis of peristalsis with finite wave numbers and moderate Reynolds numbers, eliminating the need for numerical simulations of the full Navier–Stokes equations at such physical parameters. Our simulations reveal that the pumping region is significantly influenced by short wavelength and moderate Reynolds number corrections. Further, the corrections enhance the drag force, and cell divisions within the boluses are observed at higher Reynolds numbers. The analytical derivations provided save researchers from the need for full simulations of the complex equations to acquire the key insights and contributions to capture the essence of the physical peristalsis mechanism inside wavy channels.

Theoretical modeling and dynamics analysis of a rotating piezoelectric laminated beam with different setting angles

Dynamics modeling and analysis of a rotating piezoelectric laminated beam (RPLB) considering the effect of the setting angle is presented in this paper. The rotating piezoelectric energy harvester can be simplified as a RPLB which is fixed at a rotating hub. It is easy to know that a steady transversal deformation would be produced due to the transversal component of centrifugal force when the beam is not along the radial direction (the setting angle is not equal to 0° or 180°). However, the variation of steady transversal deformation and its effect were rarely considered by existing theoretical models about the rotating harvesters. To this end, a novel nonlinear dynamics model of the RPLB is developed by the combination of floating frame reference (FFR) and absolute nodal coordinate formulation. In the model, the position coordinates and gradients on the FFR are used as the nodal coordinates to describe deformation field. The enthalpy, elastic and kinetic energies of the RPLB are derived with consideration of the piezoelectric constitutive equation and the rotation of the FFR. Thus, the dynamics equations of the RPLB can be developed by using the Lagrange's equations of second kind. The results obtained from the model show agreement with those obtained from the previous literatures, which verifies the correctness of the model. Several examples are presented to analyze the effects of rotating speed, setting angle and tip mass on steady transversal deformation, output voltage and modal characteristics.

Subwavelength dielectric waveguide for efficient travelling-wave magnetic resonance imaging

Magnetic resonance imaging (MRI) has diverse applications in physics, biology, and medicine. Uniform excitation of nuclei spins through circular-polarized transverse magnetic component of electromagnetic field is vital for obtaining unbiased tissue contrasts. However, achieving this in the electrically large human body poses a significant challenge, especially at ultra-high fields (UHF) with increased working frequencies (≥297 MHz). Canonical volume resonators struggle to meet this challenge, while radiative excitation methods like travelling-wave (TW) show promise but often suffer from inadequate excitation efficiency. Here, we introduce a new technique using a subwavelength dielectric waveguide insert that enhances both efficiency and homogeneity at 7 T. Through TE11-to-TM11 mode conversion, power focusing, wave impedance matching, and phase velocity matching, we achieved a 114% improvement in TW efficiency and mitigated the center-brightening effect. This fundamental advancement in TW MRI through effective wave manipulation could promote the electromagnetic design of UHF MRI systems.

Study of the demagnetization behavior of no-insulation persistent-current mode HTS coils under external AC fields by 3D FEM simulation

The no-insulation (NI) winding technique is promising for applications in the persistent-current mode (PCM) operation of high-temperature superconducting (HTS) coils. To produce an NI PCM coil, it is essential to understand its demagnetization behavior (i.e. decay of persistent DC current) under an external AC field, which occurs in maglev trains, electric machines and other dynamic magnet systems. For this purpose, a 3D finite-element method (FEM) model, capturing the full electromagnetic properties of NI HTS coils is established. This work studied three kinds of AC fields, observing the impact of turn-to-turn contact resistivity on demagnetization rates, which is attributed to current distribution modulations. Under a transverse AC field, the lower contact resistivity attracts more transport current to flow in the radial pathway to bypass the ‘dynamic resistance’ generated in the superconductor, leading to slower demagnetization. Under an axial AC field, the demagnetization rate exhibits a non-monotonic relation with the contact resistivity: (1) the initial decrease in contact resistivity leads to a concentration of induced AC current on the outer turns, which accelerates the demagnetization; (2) the further decrease in contact resistivity makes the current smartly redistribute to avoid flowing through the loss-concentrated outer turns, thus slowing down the demagnetization. Under a rotating DC field, a hybrid of transverse and axial fields, the impact of contact resistivity on the demagnetization rate exhibits combined characteristics of the transverse and axial components. Additionally, quantitative prediction of the demagnetization rate of NI PCM coil under external AC field is instructive for practical designs and operations, which is tested by this 3D FEM model, and a comparison with experimental results is conducted.