Transport Properties Of Organic Semiconductors Research Articles

Ultrafast Time-Domain Spectroscopy Reveals Coherent Vibronic Couplings upon Electronic Excitation in Crystalline Organic Thin Films.

The coherent coupling between electronic excitations and vibrational modes of molecules largely affects the optical and charge transport properties of organic semiconductors and molecular solids. To analyze these couplings by means of ultrafast spectroscopy, highly ordered crystalline films with large domains are particularly suitable because the domains can be addressed individually, hence allowing azimuthal polarization-resolved measurements. Impressive examples of this are highly ordered crystalline thin films of perfluoropentacene (PFP) molecules, which adopt different molecular orientations on different alkali halide substrates. Here, we report polarization-resolved time-domain vibrational spectroscopy with 10 fs time resolution and Raman spectroscopy of crystalline PFP thin films grown on NaF(100) and KCl(100) substrates. Coherent oscillations in the time-resolved spectra reveal vibronic coupling to a high-frequency, 25 fs, in-plane deformation mode that is insensitive to the optical polarization, while the coupling to a lower-frequency, 85 fs, out-of-plane ring bending mode depends significantly on the crystalline and molecular orientation. Comparison with calculated Raman spectra of isolated PFP molecules in vacuo supports this interpretation and indicates a dominant role of solid-state effects in the vibronic properties of these materials. Our results represent a first step toward uncovering the role of anisotropic vibronic couplings for singlet fission processes in crystalline molecular thin films.

A new homologous series of semi-conducting liquid crystals based on phenyl-anthracene: synthesis and effect of the alkyloxy terminal chain on charge transport and photoconductive properties.

π-Conjugated systems are the key to the charge transport properties of organic semiconductors. Four multifunctional mesogenic materials were designed and synthesised from 2-amino anthracene and para-hydroxybenzaldehyde. Each material contains a central, rigid phenyl-anthracene core and one flexible alkyloxy chain with different lengths based on the concept of combining liquid crystal (LC) materials featuring facile processability, highly ordered alignment, and effective charge transport. (E)-N-(Anthracen-2-yl)-1-(4-(alkyloxy)phenyl) methanimine (n-OPIA) with n = 8, 10, 12, and 16 was chemically characterized by nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry. Their thermal behaviours were performed by means of differential scanning calorimetry and polarised optical microscopy and showed differences in mesomorphic behaviours with respect to the alkyloxy chain length. Concerning their frontier molecular energy levels, they were studied by optical spectroscopy and cyclic voltammetry and compared to values obtained via ab initio density-functional theory (DFT) calculations. LC field-effect transistors (LC-FETs) using a solvent vapour enhanced drop casting based n-OPIA material showed efficient electrical parameters and interesting photoconductive properties, indicating their potential applications in multifunctional integrated devices. As the alkyloxy chain length of the n-OPIA compounds increased, the hole mobility, on/off current ratio, and responsivity decreased. The 8-OPIA homologue exhibits a mobility one order of magnitude larger than the previously studied homologue, namely 10-OPIA.

Over 19% Efficient Inverted Organic Photovoltaics Featuring a Molecularly Doped Metal Oxide Electron-Transporting Layer.

Molecular doping is commonly utilized to tune the charge transport properties of organic semiconductors. However, applying this technique to electrically dope inorganic materials like metal oxide semiconductors is challenging due to the limited availability of molecules with suitable energy levels and processing characteristics. Herein, n-type doping of zinc oxide (ZnO) films is demonstrated using 1,3-dimethylimidazolium-2-carboxylate (CO2-DMI), a thermally activated organic n-type dopant. Adding CO2-DMI into the ZnO precursor solution and processing it atop a predeposited indium oxide (InOx) layer yield InOx/n-ZnO heterojunctions with increased electron field-effect mobility of 32.6 cm2 V-1 s-1 compared to 18.5 cm2 V-1 s-1 for the pristine InOx/ZnO bilayer. The improved electron transport originates from the ZnO's enhanced crystallinity, reduced hydroxyl concentrations, and fewer oxygen vacancy groups upon doping. Applying the optimally doped InOx/n-ZnO heterojunctions as the electron-transporting layers (ETLs) in organic photovoltaics (OPVs) yields cells with improved power conversion efficiency of 19.06%, up from 18.3% for devices with pristine ZnO, and 18.2% for devices featuring the undoped InOx/ZnO ETL. It is shown that the all-around improved OPV performance originates from synergistic effects associated with CO2-DMI doping of the thermally grown ZnO, highlighting its potential as an electronic dopant for ZnO and potentially other metal oxides.

High Mobility n‐Type Imide‐Based Semiconductor with Unusual Single‐Crystal Packing Structure in Solution‐Processed Thin Film

AbstractSolid‐state molecular arrangement has been recognized as the most important role in the charge transport properties of organic semiconductors. Although highly ordered molecular stacking is achieved in single crystals, maintaining single‐crystal molecular packing in solution‐processed thin films remains a significant challenge. Herein, a new type of n‐type organic semiconductors based on an asymmetric fluoranthene imide unit is reported, whose intermolecular packing and aggregation behavior in the thin film state can be effectively controlled by regulating the cyano substitution sites and alkyl chain types in the imide group. F10 with cyano groups at 4,9‐sites and branched 2‐ethylhexyl chain encouragingly shows a highly ordered single‐crystal‐like molecular packing in solution‐processed thin film after thermal annealing, and thus the resulting organic field‐effect transistors exhibit impressive charge transport performance, with the electron mobility as high as 0.116 cm2 V−1 s−1. This work opens a new avenue for developing high‐performance solution‐processed n‐type semiconductors.

Pressure effects on both fluorescent emission and charge transport properties of organic semiconductors: a computational study.

External pressure can regulate the photophysical property and charge transport performance of organic semiconductors, however, the underlying mechanism at the microscopic level is still elusive. Using thermal vibrational correlation function coupled quantum mechanics/molecular mechanics and full quantum charge transfer rate theory, we systematically explore the influence of pressure on fluorescence emission and charge transport behaviours of representative cyclooctatetrathiophene (COTh). It is found that, upon pressurization, the intramolecular configurations of COTh became more twisted, leading to the blue-shifted emission. The fluorescence quantum efficiency (FQE) of COTh crystals decreases monotonically in a wide pressure range of 0-4.38 GPa, because the increase of intermolecular electronic energy transfer rate constant (keet) is larger than the decrease of internal conversion rate constant (kic), and the variation of keet is dominant. The decrease in kic is attributed to the decreasing reorganization energy, reflecting the suppression of the low-frequency flipping vibrations of four thiophene rings and the high-frequency stretching vibrations of central cyclooctatetraene, while the keet increase is due to the simultaneous increase in exciton coupling and spectra overlap. Moreover, we predicted that the hole mobility of COTh increases monotonically by nearly an order of magnitude from 0.39 to 3.00 cm2 V-1 s-1 upon compression, because of the increase in transfer integral and the decrease of charged reorganization energy. Furthermore, its hole mobility exhibits obvious anisotropy. Our work systematically builds the external pressure, molecular packing, luminescence and transport properties relationships of organic semiconductors and provides theoretical guidance for the rational design of pressure responsive organic semiconductors with excellent photoelectric performance.

Virtual mining of polymer monomers for photodetectors application and regression-aided reorganization energy prediction

Predicting and understanding the charge transport properties of organic semiconductors is a crucial target for constructing efficient electronic devices such as photodetectors. To this end, reorganization energy (Re) is a key parameter for molecular design, which provides quantitative strength of electron-photon coupling process (charge transport parameter). Although modern density functional theory-based approaches can accurately simulate intramolecular RE trends, such computations are time-consuming and costly. In this study, we present machine-learning tools for the accurate and fast prediction of intramolecular Re. These tools are effectively used for screening of new compounds with low internal Re. Moreover, virtual mining of polymer monomers is performed for photodetector applications. Machine learning models are developed with molecular descriptors (features). Regression analysis is used to show how two or more variables are related. The dependent variable yields the best outcomes and helps to predict Re. This research shows that chemical designs can accurately predict the REs of organic semiconductor materials. Out of five different regressions models, gradient booster regression gives the best prediction capability (R2 = 0.761). Moreover, chemical similarity analysis (CSA) is used to search for a new group of molecules with high performance. Library enumeration is used for structure determination and for studying the properties of these small molecules. The fitness score of newly designed quinoxaline is more than 0.9, which shows best outcome. The new strategy holds immense potential for the virtual mining of polymer monomers for photodetectors applications and regression-aided reorganization energy predictions.

Insight into the effect of side chains on thermal transport of organic semiconductors.

Understanding the correlation mechanism of side chains on thermal transport of organic semiconductors is crucial for functionalized organic electronics. In this study, phenyl and alkyl side chains, two representatives of side chain engineering, are chosen to modify dinaphtho-[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) to synthesize Ph-DNTT and C10-DNTT. The thermal conductivities of the three organic semiconductors exhibit obvious anisotropy, and the corresponding relationships are along-chain > inter-chain > cross-chain. The phenyl side chains enhance the thermal conductivity in the along-chain direction and degrade it in the inter-chain direction, while the alkyl side chains hinder thermal transport. In the cross-chain direction, side chains have a slight effect on thermal transport. The structure orientation consistency between the phenyl side chains and the main chains in Ph-DNTT leads to phonon coupling in the along-chain direction, which improves phonon transport. In the inter-chain direction, the combined effect of the phonon group velocity and phonon participation ratio causes the thermal conductivity degeneracy of Ph-DNTT. For C10-DNTT, the vibrational mismatch between the alkyl side chains and the main chains results in the degradation of thermal transport in the along-chain and inter-chain directions. In the cross-chain direction, the nonbonding interaction dominates the energy transfer in the three organic semiconductors, which induces inferior phonon transport properties and weak effects of side chains.

Strong Suppression of Thermal Conductivity in the Presence of Long Terminal Alkyl Chains in Low-Disorder Molecular Semiconductors.

While the charge transport properties of organic semiconductors have been extensively studied over the recent years, the field of organics-based thermoelectrics is still limited by a lack of experimental data on thermal transport and of understanding of the associated structure-property relationships. To fill this gap, a comprehensive experimental and theoretical investigation of the lattice thermal conductivity in polycrystalline thin films of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (Cn-DNTT-Cn with n= 0, 8) semiconductors is reported. Strikingly, thermal conductivity appears to be much more isotropic than charge transport, which is confined to the 2D molecular layers. A direct comparison between experimental measurements (3ω-Völklein method) and theoretical estimations (approach-to-equilibrium molecular dynamics (AEMD) method) indicates that the in-plane thermal conductivity is strongly reduced in the presence of the long terminal alkyl chains. This evolution can be rationalized by the strong localization of the intermolecular vibrational modes in C8-DNTT-C8 in comparison to unsubstituted DNTT cores, as evidenced by a vibrational mode analysis. Combined with the enhanced charge transport properties of alkylated DNTT systems, this opens the possibility to decouple electron and phonon transport in these materials, which provides great potential for enhancing the thermoelectric figure of merit ZT.

Spin injection and transport in single-crystalline organic spin valves based on TIPS-pentacene

Single crystals of organic semiconductors with perfect crystal structure and minimal density of defects can exhibit high mobility and low spin scattering compared with their amorphous or polycrystalline counterparts. Therefore, these materials are promising candidates as the spin transport media to obtain long spin relaxation times and spin diffusion lengths in spintronic devices. However, the investigation of spin injection and transport properties in organic single crystals is hindered by the inability to construct devices such as single-crystalline organic spin valves (OSVs). Herein, thin and large organic single crystals of 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene) were grown on a liquid substrate and transferred to a target substrate carrying ferromagnetic electrodes to construct single-crystalline OSVs. The magnetoresistance (MR) responses of the single crystals were investigated to study their spin injection and transport properties. MR value as high as 17% was probed with an intermediate layer thickness of 269 nm. More importantly, spin transport was still observed in a single crystal of a thickness up to 457 nm, which was much larger than that of polycrystalline thin film. Our research provides a general methodology for constructing single-crystalline OSVs and paves the way to probe the intrinsic spin transport properties of organic semiconductors based on single crystals.

A Three-Dimensional Porous Organic Semiconductor Based on Fully sp2 -Hybridized Graphitic Polymer.

Dimensionality plays an important role in the charge transport properties of organic semiconductors. Although three‐dimensional semiconductors, such as Si, are common in inorganic materials, imparting electrical conductivity to covalent three‐dimensional organic polymers is challenging. Now, the synthesis of a three‐dimensional π‐conjugated porous organic polymer (3D p‐POP) using catalyst‐free Diels–Alder cycloaddition polymerization followed by acid‐promoted aromatization is presented. With a surface area of 801 m2 g−1, full conjugation throughout the carbon backbone, and an electrical conductivity of 6(2)×10−4 S cm−1 upon treatment with I2 vapor, the 3D p‐POP is the first member of a new class of permanently porous 3D organic semiconductors.

A Three‐Dimensional Porous Organic Semiconductor Based on Fully sp2‐Hybridized Graphitic Polymer

AbstractDimensionality plays an important role in the charge transport properties of organic semiconductors. Although three‐dimensional semiconductors, such as Si, are common in inorganic materials, imparting electrical conductivity to covalent three‐dimensional organic polymers is challenging. Now, the synthesis of a three‐dimensional π‐conjugated porous organic polymer (3D p‐POP) using catalyst‐free Diels–Alder cycloaddition polymerization followed by acid‐promoted aromatization is presented. With a surface area of 801 m2 g−1, full conjugation throughout the carbon backbone, and an electrical conductivity of 6(2)×10−4 S cm−1 upon treatment with I2 vapor, the 3D p‐POP is the first member of a new class of permanently porous 3D organic semiconductors.

Tuning the π-π overlap and charge transport in single crystals of an organic semiconductor via solvation and polymorphism.

Polymorphism is a central phenomenon in materials science that often results in important differences of the electronic properties of organic crystals due to slight variations in intermolecular distances and positions. Although a large number of π-conjugated organic compounds can grow as polymorphs, it is necessary to have at disposal a series of several polymorphs of the same molecule to establish clear and predictive structure-property relationships. We report here on the occurrence of two solvates and three polymorphs in single crystalline form of the organic p-type semiconductor 2,2',6,6'-tetraphenyldipyranylidene (DIPO). When grown from chlorobenzene or toluene, the DIPO crystals spontaneously capture solvent molecules to form two pseudopolymorphic 1 : 1 binary solvates. Independently, three solvent-free DIPO polymorphs are obtained either from the vapor phase or from acetonitrile and benzene. Surprisingly, single crystal field-effect transistors (SC-FETs) reveal that the DIPO 1 : 1 binary solvate grown from chlorobenzene possesses a higher hole mobility (1.1 cm2 V-1 s-1) than the three solvent-free polymorphs (0.02-0.64 cm2 V-1 s-1). A refined crystallographic analysis combined with a theoretical transport model clearly shows that the higher mobility of the solvate results from an improved π-π overlap. Our observations demonstrate that solvation allows to tune the π-π overlap and transport properties of organic semiconductors by selecting appropriate solvents.

Enabling Multifunctional Organic Transistors with Fine-Tuned Charge Transport.

Organic field-effect transistors (OFETs) are promising candidates for many electronic applications not only because of the intrinsic features of organic semiconductors in mechanical flexibility and solution processability but also owing to their multifunctionalities promised by combined signal switching and transduction properties. In contrast to rapid developments of high performance devices, the construction of multifunctional OFETs remains challenging. A key issue is fine-tuning the charge transport by modulating electric fields that are coupled with various external stimuli. Given that the charge transport is determined by complicated factors involving material and device engineering, the development of effective strategies to manipulate charge transport is highly desired toward state-of-the-art multifunctional OFETs. In this Account, we present our recent progress on device-engineered OFETs for sensing applications and thermoelectric studies of organic semiconductors. The interactions between organic semiconductors and the target analyte determine the performance of chemical sensors based on OFETs. We introduced gas receptors and in situ tailored molecular antenna on the surface of ultrathin active layers. The engineered interfaces enable direct and specific semiconductor-analyte interactions, as demonstrated in developed chemical sensors and biosensors with prominent sensitivity and good selectivity. In comparison with chemical stimuli, many physical stimuli such as pressure typically possess a limit effect on the charge transport properties of organic semiconductors. By utilizing the suspended-gate geometry, the carrier concentration in a conductive channel can be controlled quantitatively by the pressure dominated changes in the capacitance of an air dielectric layer, allowing for ultrasensitive pressure detection in a unique manner. More importantly, the transduced current can be further processed by a synaptic OFET, in which the proton/electron coupling interfaces contribute to the dynamic modulation of carrier concentration, thus mimicking biological synapses. The integrated pressure sensor and synaptic OFETs, namely, the dual-organic-transistor-based tactile-perception element, has exhibited promising applications in artificial intelligence elements. Aiming at revealing thermoelectric (TE) properties of organic semiconductors, we also investigated field-modulated TE performance of several high-mobility semiconductors by varying the driving electric field to the temperature gradient. This has been confirmed to offer a strategy to accelerate the search for promising TE materials from well-developed organic semiconductors. By tuning the charge transport process in the device, the functional modulation of OFETs has experienced significant progress in the preceding years. The exploration of new ways to create OFETs with more fascinating functionalities is still full of opportunities to obtain greater benefit from organic transistors.

Machine Learning–Based Charge Transport Computation for Pentacene

AbstractInsight into the relation between morphology and transport properties of organic semiconductors can be gained using multiscale simulations. Since computing electronic properties, such as the intermolecular transfer integral, using quantum chemical (QC) methods requires a high computational cost, existing models assume several approximations. A machine learning (ML)–based multiscale approach is presented that allows to simulate charge transport in organic semiconductors considering the static disorder within disordered crystals. By mapping fingerprints of dimers to their respective transfer integral, a kernel ridge regression ML algorithm for the prediction of charge transfer integrals is trained and evaluated. Since QC calculations of the electronic structure must be performed only once, the use of ML reduces the computation time radically, while maintaining the prediction error small. Transfer integrals predicted by ML are utilized for the computation of charge carrier mobilities using off‐lattice kinetic Monte Carlo (kMC) simulations. Benefiting from the rapid performance of ML, microscopic processes can be described accurately without the need for phenomenological approximations. The multiscale system is tested with the well‐known molecular semiconductor pentacene. The presented methodology allows reproducing the experimentally observed anisotropy of the mobility and enables a fast estimation of the impact of disorder.

Fluorination-Induced Evolution of Columnar Packing in Fluorous Triphenylenes and Benzotriphenylenes.

Use of D3h -symmetrical triphenylene (TRPH) as a substrate for high-temperature radical reactions with C4 F8 I2 under varying conditions resulted in the introduction of four types of fluorinated substituents: ω-C4 F8 H, c-C4 F8 , c-C4 F4 , and c-C4 HF3 . In contrast to the previous work on direct (poly)substitutions with RF groups in polycyclic aromatic hydrocarbons (PAHs), in this work regiospecificity, selectivity, and high yield were achieved for TRPH(C4 F8 ) and TRPH(C4 F8 )3 . New single-crystal structural data for seven compounds combined with literature crystallographic data allowed for the first detailed and precise analysis of the effects of fluorous substituent types, their number, and their position(s) on the TRPH core on the solid-state packing, and more specifically, the degree of π-π overlap between neighboring molecules, which is linked to charge transport properties. Comparison of isostructural partially fluorinated benzotriphenylenes, 2,3-TRPH(C4 F4 ) and 2,3-TRPH(C4 HF3 ), revealed an unexpectedly large (30 %) drop of π-π overlap, when only one fluorine atom was replaced with the hydrogen atom in a C4 F4 moiety. Theoretical and potentially practical implications of this work may include further testing and elaboration of computational methods describing solid-state interactions and predictions of transport properties of organic semiconductors, and further advances in the molecular design of high-performing TRPH-based organic materials and supramolecular architectures for organic optoelectronics.

Effects of crystal structures and intermolecular interactions on charge transport properties of organic semiconductors

In this study, the effects of the packing configuration and intermolecular interaction on the transport properties are investigated based on density functional theory. Molecular design from the standpoint of a quantum-chemical view is helpful to engender favorable molecular packing motifs. The transfer integral along the orientation with π–π overlap is much larger than other directions without π–π overlap, and the mobility along this orientation is higher than that along other directions. The intermolecular interaction analyses demonstrate that hydrogen bonds play a crucial role with strong electrostatic interactions in charge transfer. There will be a synergistic relationship when the π–π stacking and intermolecular interaction coexist in the same direction. It turns out that intermolecular interactions are responsible for charge transport, while π–π stacking interactions dominate donor–acceptor transport. Incorporating the understanding of the molecular packing motifs and intermolecular interactions into the design of organic semiconductors can assist in the development of novel materials.

Effect of Alkyl‐Chain Length on Charge Transport Properties of Organic Semiconductors and Organic Field‐Effect Transistors

AbstractThe molecular structure and electrical properties of two n‐type organic small molecules which have the same core but different alkyl chains are compared. The effect of the length of alkyl chains on charge transport along the alkyl‐chain stacking direction (out‐of‐plane) is investigated by a combination of techniques. The results show that a longer alkyl chain corresponds to lower out‐of‐plane mobility (µout‐of‐plane). More importantly, it is found that this effect not only plays a significant role in affecting the performance of diode‐structure devices such as organic light‐emitting diodes (OLEDs) or organic photovoltaics (OPVs), but also has profound influence on the performance of organic field‐effect transistors (OFETs), especially for OFETs which are in staggered configuration.

Anion-induced N-doping of naphthalenediimide polymer semiconductor in organic thin-film transistors

Molecular doping is an important strategy to improve the charge transport properties of organic semiconductors in various electronic devices. Compared to p-type dopants, the development of n-type dopants is especially challenging due to poor dopant stability against atmospheric conditions. In this article, we report the n-doping of the milestone naphthalenediimide-based conjugated polymer P(NDI2OD-T2) in organic thin film transistor devices by soluble anion dopants. The addition of the dopants resulted in the formation of stable radical anions in thin films, as confirmed by EPR spectroscopy. By tuning the dopant concentration via simple solution mixing, the transistor parameters could be readily controlled. Hence the contact resistance between the electrodes and the semiconducting polymer could be significantly reduced, which resulted in the transistor behaviour approaching the desirable gate voltage-independent model. Reduced hysteresis was also observed, thanks to the trap filling by the dopant. Under optimal doping concentrations the channel on-current was increased several fold whilst the on/off ratio was simultaneously increased by around one order of magnitude. Hence doping with soluble organic salts appears to be a promising route to improve the charge transport properties of n-type organic semiconductors.

Theoretical insights into molecular blending on charge transport properties in organic semiconductors based on quantum nuclear tunneling model

The effects of molecular blending on the charge transport properties of organic semiconductors are studied based on ab initio DFT calculation and quantum nuclear tunneling model coupled with kinetic Monte-Carlo simulation. Two model compounds, [(2,3,9,10-tetrachloropentacene-6,13-diyl)bis(ethyne-2,1-diyl)]bis(triisopropylsilane) (4Cl-TIPS-P) and [(1,2,3,4,8,9,10,11-octafluoropentacene-6,13-diyl)bis(ethyne-2,1-diyl)]bis(triisopropylsilane) (8F-TIPS-P), are blended homogeneously with different ratios, and the system is studied at a temperature ranging from 50 to 300 K. Our result shows that, at high temperature, blending leads to a smooth shift in mobility, whereas at a low temperature, one of the components tends to become traps, thus hamper the charge transport at low concentration. It is found that at 50 K, blending 0.995 mol. % of 4Cl-TIPS-P with 0.005 mol. % of 8F-TIPS-P, whose site energy is 48.1 meV lower than that of 4Cl-TIPS-P, would reduce the electron mobility by three orders of magnitude from that of pristine 4Cl-TIPS-P due to the trapping effect. The results are in agreement with the experimental observations.

Quantitative Correlation between Carrier Mobility and Intermolecular Center-to-Center Distance in Organic Single Crystals

Charge transport properties of organic semiconductors critically depend on their molecular packing structures. Controlling the charge transport by varying the molecular packing and understanding their structure–property correlations are essential for developing high-performance organic electronic devices. Here, we demonstrate that the charge carrier mobility in organic single-crystal nanowires can be modulated with respect to the intermolecular center-to-center distance by applying uniaxial strain to the cofacially stacked crystals. Monotonic changes in charge carrier mobility (from 0.0196 to 19.6 cm2V–1s–1 for 6,13-bis(triisopropylsilylethylnyl) pentacene (TIPS-PEN)) were observed under a wide range of strains from −16.7% (compressive) to 16.7% (tensile). Furthermore, the measured values of charge carrier mobility were in good agreement with theoretical calculations based on charge localized hopping theory. These results provide a definitive relationship between intermolecular packing arrangement and cha...