Transparent Scaffold Research Articles

Intense and Stable Blue Light Emission From CsPbBr3/Cs4PbBr6 Heterostructures Embedded in Transparent Nanoporous Films

AbstractLead halide perovskite nanocrystals are attractive for light emitting devices both as electroluminescent and color‐converting materials since they combine intense and narrow emissions with good charge injection and transport properties. However, while most perovskite nanocrystals shine at green and red wavelengths, the observation of intense and stable blue emission still remains a challenging target. In this work, a method is reported to attain intense and enduring blue emission (470–480 nm), with a photoluminescence quantum yield (PLQY) of 40%, originating from very small CsPbBr3 nanocrystals (diameter < 3 nm) formed by controllably exposing Cs4PbBr6 to humidity. This process is mediated by the void network of a mesoporous transparent scaffold in which the zero‐dimensional Cs4PbBr6 lattice is embedded, which allows the fine control over water adsorption and condensation that determines the optimization of the synthetic procedure and, eventually, the nanocrystal size. The approach provides a means to attain highly efficient transparent and stable blue light‐emitting films that complete the palette offered by perovskite nanocrystals for lighting and display applications.

Development of a new kappa-carrageenan hydrogel system to study benthic diatom vertical movements.

Benthic diatom vertical movement has been investigated mainly through indirect measurements based on chlorophyll a fluorescence and spectral reflectance signals. The presence of sediment hinders direct imaging and grazers activity renders the work under controlled conditions very difficult. This study provides a tool to study diatoms movement in a 3D hydrogel matrix. Synthetic and natural hydrogels were tested to find the best 3D transparent scaffold where diatoms could grow and freely move in all directions. Polyamidoamines (PAAm) hydrogels were no-cytocompatible and hyaluronic acid (HA) only allowed diatoms to survive for 2-days. Natural hydrogels made of gelatin/Na-alginate, Na-alginate and kappa-carrageenan (KC) were cytocompatible, with KC showing the best properties for diatom growth and movement on a long term (up to 2 months). Comparing Nitzschia spathulata, Gyrosigma limosum and Navicula phyllepta growth in liquid media vs in KC gels, we found that diatoms reached a significantly higher final biomass in the hydrogel condition. Hydrogels were also useful to isolate large size diatom species e.g., Nitzschia elongata, that did not survive in suspension. Finally, we showed three ways to study diatom species-specific movement in KC hydrogels: 1) controlled species mix; 2) natural diatom assemblages with grazers; and 3) natural diatom assemblages without grazers. With our system, single diatoms could be imaged, identified, and counted. In addition, different stimuli, e.g., light intensity and light composition can be applied and their effects on movement and physiology studied without being masked by sediment or impaired by meiofauna.

Effects of Different Perfusing Routes through The Portal Vein, Hepatic Vein, and Biliary Duct on Whole Rat Liver Decellularization.

Organ transplantation is the last therapeutic choice for end-stage liver failure, which is limited by the lack of sufficient donors. Decellularized liver can be used as a suitable matrix for liver tissue engineering with clinical application potential. Optimizing the decellularization procedure would obtain a biological matrix with completely removed cellular components and preserved 3-dimensional structure. This study aimed to evaluate the decellularization efficacy through three anatomical routes. In this experimental study, rat liver decellularization was performed through biliary duct (BD), portal vein (PV), and hepatic vein (HV); using chemical detergents and enzymes. The decellularization efficacy was evaluated by measurement of DNA content, extracellular matrix (ECM) total proteins, and glycosaminoglycans (GAGs). ECM preservation was examined by histological and immunohistochemical (IHC) staining and scanning electron microscopy (SEM). Scaffold biocompatibility was tested by the MTT assay for HepG2 and HUVEC cell lines. Decellularization through HV and PV resulted in a transparent scaffold by complete cell removal, while the BD route produced an opaque scaffold with incomplete decellularization. H and E staining confirmed these results. Maximum DNA loss was obtained using 1% and 0.5% sodium dodecyl sulfate (SDS) in the PV and HV groups and the DNA content decreased faster in the HV group. At the final stages, the proteins excreted in the HV and PV groups were significantly less than the BD group. The GAGs level was diminished after decellularization, especially in the PV and HV groups. In the HV and PV groups the collagen amount was significantly more than the BD group. The IHC and SEM images showed that the ECM structure was preserved and cellular components were entirely removed. MTT assay showed the biocompatibility of the decellularized scaffold. The results revealed that the HV is a more suitable route for liver decellularization than the PV and BD.

Preparation of an artificial crystal skull and its formation mechanism

• Homogenous organic–inorganic composites with high transparency and modulus were prepared. • The composites simulate chemical composition of nature bone and can be constructed into artificial crystal skull. • Possible binding mechanism between CaP and GelMA was discussed. We present an efficient and simple approach using calcium phosphate oligomers and methacrylic anhydride-modified gelatine to prepare homogeneous organic–inorganic composites of 2D and 3D shapes with high transparency and mechanical properties. We characterized the microstructure and chemical composition and studied the formation mechanism. The scaffold could potentially be applied as a bioink when used in combination with UV light to create a biomimetically engineered transparent scaffold.

Allantoin-functionalized silk fibroin/sodium alginate transparent scaffold for cutaneous wound healing

In clinical application, it's highly desirable for developing bio-functionalized cutaneous scaffold with transparent features for convenient observation, excellent biocompatibility, and high efficiency for promoting wound repair. Herein, allantoin-functionalized composite hydrogel was developed by coupling silk fibroin (SF) and sodium alginate (SA) for treatment of cutaneous wounds. The prepared allantoin-functionalized SF-SA composite scaffolds (AFAS) exhibited excellent mechanical properties, especially featured by similar ultimate tensile strength (UTS) and elongation at breaking to human skin. Besides, the solvent-casting method guaranteed the AFAS to obtain highly transparent properties with sufficient moisture permeability and excellent adhesion in wet state. In vitro cellular experiments demonstrated excellent biocompatibility of the scaffold that attachment and proliferation of NIH-3T3 fibroblast cells was promoted in the presence of AFAS. Furthermore, the scaffolds exhibited efficient hemostatic property, based on rat hepatic hemorrhage model. In a cutaneous excisional mouse wound model, the AFAS significantly improved the wound closure rate, compared with pure SF-SA scaffolds and blank control. Moreover, the histomorphological assessments showed that AFAS facilitated the integrity of skin and wound healing process by enhancing collagen deposition, re-epithelialization and vascularization at wound site. The results demonstrate that the novel allantoin-functionalized SF/SA transparent hydrogel has great potential for clinical treatment of cutaneous wound.

Biofabrication of chitosan/chitosan nanoparticles/polycaprolactone transparent membrane for corneal endothelial tissue engineering

We aimed to construct a biodegradable transparent scaffold for culturing corneal endothelial cells by incorporating chitosan nanoparticles (CSNPs) into chitosan/polycaprolactone (PCL) membranes. Various ratios of CSNP/PCL were prepared in the presence of constant concentration of chitosan and the films were constructed by solvent casting method. Scaffold properties including transparency, surface wettability, FTIR, and biocompatibility were examined. SEM imaging, H&E staining, and cell count were performed to investigate the HCECs adhesion. The phenotypic maintenance of the cells during culture was investigated by flow cytometry. Transparency and surface wettability improved by increasing the CSNP/PCL ratio. The CSNP/PCL 50/25, which has the lowest WCA, showed comparable transparency with human acellular corneal stroma. The scaffold was not cytotoxic and promoted the HCECs proliferation as evaluated by MTT assay. Cell counting, flow cytometry, SEM, and H&E results showed appropriate attachment of HCECs to the scaffold which formed a compact monolayer. The developed scaffold seems to be suitable for use in corneal endothelial regeneration in terms of transparency and biocompatibility.

Fluorescent carbon dots embedded in mesoporous silica nanospheres: A simple platform for Cr(VI) detection in environmental water

In this work, amino-functionalized mesoporous silica nanospheres (NH2-mSiO2) anchored with carbon dots (CDs) have been designed to construct an outstanding fluorescent sensor for heavy metal detection. Uniform mSiO2 was chosen to provide an optically transparent scaffold for immobilizing CDs. With the help of amino group modification on the surface of silica, benzene-1,4-diboronic acid (BA) was used as raw material to load CDs in the pores of mSiO2 by one-step solvothermal method. The proposed nanohybrid can solve the problem of aggregation-induced fluorescence quenching, leading to bright blue emission at 450 nm. Meanwhile, the fluorescence of NH2-mSiO2@CDs showed high sensitivity to Cr(VI) in acetic acid buffer solution (pH = 4) with detection limit as low as 5 nM by inner filter effect (IFE) and electrostatic interaction (EI). The proposed method can also be extended to other CDs-based detection systems for chemical/biological sensors.

Porous Optically Transparent Cellulose Acetate Scaffolds for Biomimetic Blood-Brain Barrierin vitro Models.

In vitro blood-brain barrier (BBB) models represent an efficient platform to conduct high-throughput quantitative investigations on BBB crossing ability of different drugs. Such models provide a closed system where different fundamental variables can be efficaciously tuned and monitored, and issues related to scarce accessibility of animal brains and ethics can be addressed. In this work, we propose the fabrication of cellulose acetate (CA) porous bio-scaffolds by exploiting both vapor-induced phase separation (VIPS) and electrospinning methods. Parameters of fabrication have been tuned in order to obtain porous and transparent scaffolds suitable for optical/confocal microscopy, where endothelial cell monolayers are allowed to growth thus obtaining biomimetic BBB in vitro models. Concerning VIPS-based approach, CA membranes fabricated using 25% H2O + 75% EtOH as non-solvent showed submicrometer-scale porosity and an optical transmittance comparable to that one of commercially available poly(ethylene terephthalate) membranes. CA membranes fabricated via VIPS have been exploited for obtaining multicellular BBB models through the double seeding of endothelial cells and astrocytes on the two surfaces of the membrane. Electrospun CA substrates, instead, were characterized by micrometer-sized pores, and were unsuitable for double seeding approach and long term studies. However, the potential exploitation of the electrospun CA substrates for modeling blood-brain-tumor barrier and studying cell invasiveness has been speculated. The features of the obtained models have been critically compared and discussed for future applications.

Marimo-Bead-Supported Core-Shell Nanocomposites of Titanium Nitride and Chromium-Doped Titanium Dioxide as a Highly Efficient Water-Floatable Green Photocatalyst.

The release of untreated industrial wastewater creates a hazardous impact on the environment. In this regard, the development of an environmentally friendly catalyst is of paramount importance. Here, we report a highly efficient and reusable core-shell TiN/SiO2/Cr-TiO2 (TSCT) photocatalyst that is composed of SiO2-cladded titanium nitride (TiN) nanoparticles (NPs) decorated with Cr-doped TiO2 NPs for the removal of organic contaminants from water. The TiN NPs serve as the main light absorber component with excellent visible-light absorption along with Cr-TiO2 NPs. The TSCT shows remarkable improvement in the photodecomposition of methylene blue (MB) over Cr-TiO2 and TiO2 NPs. An efficient structural design is proposed by adopting calcium alginate beads (P-Marimo beads) as a transparent scaffold for supporting our TSCT, which floats nature on the water surface and realizes easy handling as well as excellent reusability for multipurpose water purification. Surprisingly, our TSCT is found to keep its catalytic activity even after the illumination is turned off. Our proposed P-Marimo-encapsulated TSCT can be utilized as an excellent green photocatalyst with high photocatalytic performance, good recyclability, and easy handling.

Luminescent methacrylic copolymers with side-chain cyclometalated iridium(III) complexes

A series of eight copolymers made of a poly (methyl methacrylate) backbone with a luminescent iridium(III)-based pendant is presented. These materials are obtained by radical copolymerization of different ratios of methyl methacrylate (MMA) with the reactive Ir-based MMA monomer [Ir(ppy)2(ptmma)]Cl (Hppy = 2-phenylpyridine, ptmma = 11-(4-pyridin-2-yltriazol-1-yl)undecyl 2-methylprop-2-enoate). The products are characterized by NMR, IR and DSC methods. The specific ratio among the two monomers, dictates the concentration of the emissive iridium-based centers along the polymer backbone, which affects the overall luminescence behavior of the material. The position of the absorption and emission maxima of the iridium-based monomer and of the related polymeric compounds are virtually identical, pinpointing the optically innocent character of the polymer matrix. Photophysical investigations show that the emission quantum yields (PLQYs) of the iridium-based emitters improve upon increasing the fraction of the inert MMA co-monomer, due to a progressive decrease in self-absorption and self-quenching, approaching the infinite-dilution limit at the relatively low [MMA]:[Ir] molar ratio of 500, with PLQY = 0.51 ± 0.05.The concentration-quenching rate process follows a power-law proportional to R–(2.6±0.9), where R is the calculated average distance between the emitting units of the copolymers. Such a deviation from the expected dipole-dipole interaction (i.e., R−6 dependence) suggests the partial formation of aggregates leading to the occurrence of static self-quenching in the solid matrix, as the concentration of the iridium centers increases. These results offer valuable hints for the formulation of strongly emitting hybrid materials in which a high concentration of triplet luminophores is embedded in organic polymers solely serving as solid transparent scaffolds.

Fabrication of transparent hemispherical 3D nanofibrous scaffolds with radially aligned patterns via a novel electrospinning method

Tissue engineering has significantly contributed to the development of optimal treatments for individual injury sites based on their unique functional and histologic properties. Human organs and tissue have three-dimensional (3D) morphologies; for example, the morphology of the eye is a spherical shape. However, most conventional electrospinning equipment is only capable of fabricating a two-dimensional (2D) structured fibrous scaffold and no report is available on a 3D electrospinning method to fabricate a hemispherical scaffold to mimic the native properties of the cornea, including microscopic to macroscopic morphology and transparency. We proposed a novel electrospinning method using a single nonconductive hemispherical device and a metal pin. A designed peg-top shaped collector, a hemispherical nonconductive device with a metal pin in the center and copper wire forming a circle around at the edge was attached to a conventional conductive collector. A 3D hemispherical transparent scaffold with radially aligned nanofibers was successfully fabricated with the designed peg-top collector. In summary, our fabricated 3D electrospun scaffold is expected to be suitable for the treatment of injuries of ocular tissues owing to the hemispherical shape and radially aligned nanofibers which can guide the direction of the main collagen and cellular actin filament in the extracellular matrix.

Highly concentrated collagen solutions leading to transparent scaffolds of controlled three-dimensional organizations for corneal epithelial cell colonization.

This study aimed at controlling both the organization and the transparency of dense collagen scaffolds making use of the lyotropic mesogen properties of collagen. Cholesteric or plywood-like liquid crystal phases were achieved using mixtures of acetic and hydrochloric acids as solvents. The critical pH at which the switch between the two phases occurred was around pH = 3. The use of the two acids led to fibrillated collagen I scaffolds, whose visual aspect ranged from opaque to transparent. Rheological investigations showed that viscoelastic properties of the plywood-like solutions were optimized for molding due to faster recovery. They also confirmed the correlation between the elastic modulus and the diameter of collagen fibrils obtained after fibrillogenesis under ammonia vapor. Human corneal epithelial cells, grown from donor limbal explants, were cultured both on transparent plywood-like matrices and on human amniotic membranes for 14 days. The development of corneal epithelium and the preservation of epithelial stem cells were checked by optical microscopy, colony formation assay, immuno-fluorescence and quantitative polymerase chain reaction. A higher level of amplification of limbal stem cells was obtained with collagen matrices compared with amniotic membranes, showing the high biocompatibility of our scaffolds. We therefore suggest that collagen solutions presenting both plywood-like organization and transparency might be of interest for biomedical applications in ophthalmology.

Heparin-modified gelatin scaffolds for human corneal endothelial cell transplantation

Although one of the most transplanted tissues, a shortage of cadaveric corneas for transplantation still exists in the western society and elsewhere. The goal of this study was to develop a biological scaffold to support transfer of cultured human corneal endothelial cells (HCECs) into the anterior chamber of the eye, potentially a replacement for cadaveric donor tissue. A series of transparent scaffolds were fabricated from gelatin and modified with heparin. Mechanical parameters of the scaffolds, such as stiffness, affected cell proliferation, phenotype and cell surface marker expression were determined. The heparin-modified scaffolds had a greater capacity to absorb basic fibroblast growth factor (bFGF) and showed better release kinetics for up to 20 days. The release of bFGF from the scaffolds improved HCECs survival and reduced cellular loss. The scaffolds were flexible and could be folded and implanted in rabbits' eyes, through a small incision in the cornea. The scaffolds adhered to the inner surface of the corneal stroma and gradually integrated with the surrounding tissue. These results indicate that gelatin based corneal scaffolds modified to absorb and release growth factors and seeded with HCECs, might be a suitable alternative for cadaveric cornea transplantation.

Fibrin phantom for use in optical coherence tomography

This work presents a novel tissue-mimicking phantom for use in a range of optical coherence tomography (OCT) experiments. Such phantoms are critical in the development and assessment of new OCT techniques, but no previously published phantoms have become universally accepted. We present the first description of a phantom based on a fibrin matrix, which improves key attributes of previously published methods. It provides a biocompatible, optically transparent scaffold in which to incorporate organic and/or inorganic optical scattering materials. Its fabrication time is markedly shorter than many common phantoms, and its lifetime is longer than other biocompatible phantoms. The potential of fibrin phantoms incorporating Intralipid() to introduce uniform optical scattering is demonstrated. The measured attenuation coefficient as a function of Intralipid concentration confirms the ability to control optical scattering. A bilayer phantom with distinct optical scattering in each layer is also presented.

A new method for continual quantitation of viable cells on endothelialized polyurethanes.

Many of the segmented polyurethanes currently used in cardiovascular prostheses undergo either modification of their surface structure or are lined with a confluent monolayer of endothelial cells to improve their hemocompatibility. During the establishment of an endothelial cell lining on these biopolymers it is necessary to continually monitor the number of viable cells that are covering the substrate. Yet, not all of the conventional cell enumeration techniques are suitable for assessing the growth of endothelial cells on polyurethanes. Methods, such as direct cell counting, dye uptake, or DNA or protein staining require either a transparent scaffold or lead to termination of the culturing process prior to measurement. In addition, some of the spectroscopic assays are often hampered by interaction of the dyes and/or solubilizers with the various constituents (e.g., catalyzers, antioxidants) and/or functional groups in the polyurethane formulations. In addressing these problems, we adapted a novel, highly reproducible fluorescent assay which is based on reduction by viable cells of an electrochemically sensitive compound, Alamar Blue. The bioreduced product is soluble and stable in culture media and noncytotoxic. In addition, the assay is independent of the geometry or physicochemical properties of the polymeric surfaces. In the present study we focus on the implementation of this assay to monitoring attachment and growth of various endothelial cell types on segmented polyurethanes.