Transparent Resistive Memory Devices Research Articles

Impacts of Co doping on ZnO transparent switching memory device characteristics

The resistive switching characteristics of indium tin oxide (ITO)/Zn1−xCoxO/ITO transparent resistive memory devices were investigated. An appropriate amount of cobalt dopant in ZnO resistive layer demonstrated sufficient memory window and switching stability. In contrast, pure ZnO devices demonstrated a poor memory window, and using an excessive dopant concentration led to switching instability. To achieve suitable memory performance, relying only on controlling defect concentrations is insufficient; the grain growth orientation of the resistive layer must also be considered. Stable endurance with an ON/OFF ratio of more than one order of magnitude during 5000 cycles confirmed that the Co-doped ZnO device is a suitable candidate for resistive random access memory application. Additionally, fully transparent devices with a high transmittance of up to 90% at wavelength of 550 nm have been fabricated.

Enhanced switching uniformity in AZO/ZnO1−x/ITO transparent resistive memory devices by bipolar double forming

The influence of single and double forming on the switching stability of AZO/ZnO1−x/ITO transparent resistive memory devices was investigated. Devices that underwent single forming exhibited severe switching instability, where as those that underwent double forming exhibited excellent switching uniformity. The quantity of conducting filaments can be limited by applying the two-step forming process. Consequently, the set/reset process can be controlled, enhancing switching stability. Satisfactory endurance with an acceptable ON/OFF ratio of 102 and satisfactory retention behavior of 104 s at room temperature confirmed the reliability of optimized devices. Furthermore, highly transparent devices (transparency of approximately 85% in visible range) have been fabricated.