Transparency Effect Research Articles

Dual dynamically tunable terahertz graphene-based plasmonic induced transparency and slow light effects

A novel single-layer graphene-based structure is designed in this article. This structure consists of two graphene strips and two graphene blocks. The components of this structure generate two bright modes and one dark mode in the terahertz region, and these three modes undergo destructive interference, leading to the phenomenon of double plasmonic induced transparency. The graphene of this structure has continuity, and the Fermi level can be adjusted by adjusting the bias voltage applied to the structure. Compared with those discontinuous structures, it is easier to achieve tuning function. The structure uses the finite-difference time-domain for data simulation, uses the coupled mode theory for theoretic calculation, and compares the transmission spectra obtained by the two methods. Through observation, it can be found that the frequency positions of the peaks and dips of the simulated transmission spectrum increase with the increase of the Fermi level, showing a perfect linear relationship, which indicates that this structure has great prospects in the modulator. In addition, the structure has achieved good results in the slow light effect, and after measurement, the peak values of group index and group delay can reach up to 380 and 0.241 ps, respectively. By utilizing these advantages, this structure can provide more possibilities for the development and research of slow light fields.

Corrections to “Simultaneous Detection of Refractive Index and Temperature in Terahertz Band Based on Electromagnetic Induced Transparency Effect”

Corrections to “Simultaneous Detection of Refractive Index and Temperature in Terahertz Band Based on Electromagnetic Induced Transparency Effect”

Terahertz sensor based on plasmon-induced transparency in a carbon nanotube metamaterial

In this paper, the plasmon-induced transparency (PIT) effect based on a carbon nanotube (CNT) resonator structure is achieved. An array of two split ring resonators (SRRs) and a cut wire (CW) resonator are utilized to form the proposed metamaterial. A PIT transparency window is achieved under a TM polarization terahertz light. Results show that the PIT effect is originated from the near-field coupled of the bright mode and dark mode. A coupled harmonic oscillator model is used to describe the near-field coupling between the bright mode and subradiant mode, and the results agree well with the FDTD simulation. The effect of geometrical sizes, like structure period, the radius and the splitting degree of the split ring resonator, the length of the cut wire resonator, and the coupling distance on the PIT window is analyzed in detail. Besides, the sensing and slow light performance of the proposed CNT metamaterial are studied, a maximum sensitivity of 0.74 THz RIU, and a time delay of 0.54 ps are obtained. Therefore, the proposed CNT-based device can be applied to the PIT effect, near-infrared modulators, slow light devices, sensors, and other fields.

Dynamically tunable multiple plasmon-induced transparency effect based on monolayer graphene structure system with rectangular defect cavities

In this article, a dynamically tunable multiple plasmon-induced transparency (PIT) effect in monolayer graphene structure system with rectangular defect cavities is investigated both theoretically and numerically. Because the graphene of our structure exists in a continuous form, the Fermi level of the graphene can be dynamically tuned by simply applying a bias voltage. The expressions of the theoretical transmittance are correctly deduced, and the fitting theoretical results are very consistent with the numerical simulation data. When the Fermi level of the graphene is increased from 0.8 eV to 1.2 eV, the group index of the dual-PIT system is controlled between 383 and 766. Alternatively, the group index of the triple-PIT system is maintained between 445 and 812. Moreover, the maximum group index can reach 812 at 1.2 eV, which shows that it can be designed as an excellent slow light device. Therefore, the proposed structures and results may provide strong guidance towards multichannel optical filters, dynamically tunable and excellent slow light and light storage devices.

Electromagnetically induced transparency in a strongly coupled orthogonal polarization-insensitive planar terahertz metamaterial

We demonstrate experimentally and numerically the electromagnetically induced transparency (EIT) effect in a strongly coupled planar terahertz (THz) metamaterial. The circular-shaped four-arc geometry combined with cross resonators ensures the polarization-insensitive response of the EIT for the orthogonal polarization incident THz. The EIT response can be varied by changing the gap between the arc and cross-shaped resonators. The field profiles indicate a strong coupling between the resonators leading to the EIT effect. In order to understand the underlying physical mechanism, we employed a coupled harmonic oscillator model, which suggests an increase in coupling when the distance between resonators is reduced. THz time-domain spectroscopy of the fabricated samples with the same shape and size of the simulated structures was used to verify the numerical findings. Our study uses a symmetric and easy-to-fabricate planar metasurface that can pave the way for the design and construction of THz photonic components, such as optical switches and slow light devices.

Dynamic tunable multiple plasmon induced transparency sensor and optical switch in dual-polarization excitation in a terahertz graphene metamaterial

This paper proposes the development of a simplified graphene-based terahertz device that exhibits multiple plasmon induced transparency (PIT) effects in x-polarized and y-polarized waves. The PIT device is composed of “Z-shaped” and “parallel strips” structures, which demonstrate multiple transparency windows under x-polarized and y-polarized incident light within the frequency range of 2-15 THz. Additionally, under x-polarized incident, the device demonstrates wideband transparency at 3.4 THz. By comparing the transmission spectra of individual and combined structures, we observe that the initial transmission valley of the single two horizontal stripes structure transforms into a PIT curve in the combined structure, while the transmission valley of the other individual structures remains transmission. The PIT device demonstrates a peak sensitivity of 3THz/RIU for x-polarized waves and 2.9THz/RIU for y-polarized waves when employed as a light sensor. PIT as a light switch can attain a maximum modulation depth of 81.4% for x-polarized waves and 71.2% for y-polarized waves at Fermi energy levels ranging from 0.5eV to 1.2eV. The presented PIT device shows promise for applications in high-sensitivity optical sensing and optical switching.

An efficient biosensor based on plasmon-induced transparency effect in plasmonic-graphene-black phosphorous absorber for diabetes diagnosis

In this work, an efficient absorber (biosensor) based on the combinations of graphene – plasmonic - black phosphorous configurations is proposed and investigated. The presented absorber is considered to operate based on the plasmon-induced transparency (PIT) effect. The presented absorber is based on various layers of graphene, phosphorene and gold in the ring and plate shapes. In the bio-sensing application, the analyte would be inserted in the upper layer while being in contact with the incident light wave. By considering the PIT effect, the absorber would be further improved (improving the absorption's peak value). In order to fulfill the improvement, effects of structural parameters (R1, R2, R3, R4, h1, h2, h3) and chemical potential(Ef) would be investigated. After the improvement process, the structure would be utilized as a biosensor for detection the Glucose concentrations in blood samples. By detecting Glucose concentrations in blood samples, physicians can diagnose diabetes in early stages. Finally, the sensitivity factor, figure of merit (FOM), full width at half maximum (FWHM) and Q-Factor of 2686.5 nm/RIU, 134.325 RIU−1, 20 nm and (58.5–76.5) would be achieved, respectively. As a result, the proposed absorber (biosensor) can be a remarkable and great candidate for bio-sensing applications in optical integrated circuits.

Logic operation and all-optical switch characteristics of graphene surface plasmons.

Terahertz logic gates play a crucial role in optical signal processing and THz digitization. In this paper, we propose a design strategy for graphene-based metamaterial THz all-optical logic gate devices based on the induced transparency effect of surface isolated. Theoretically, we realize Boolean operations by coupling of a hexagonal graphene resonant cavity with dual embedded rotatable ellipses. Based on the coupled mode theory, the elliptical rotation angle of the resonator is an important factor affecting the PIT phenomenon. We control the logic input by adjusting the rotation angles of the two embedded ellipses. The analysis results show that: under the incidence of y-polarized light, the ellipse deflection angle of 0° represents the input signal '0', and the ellipse deflection angle of 30° represents the input signal '1'. Through numerical simulation, the structure realizes two logical operations of NAND and AND. Under the incidence of x-polarized light, the ellipse deflection angle of 0° represents the input signal '0', and the ellipse deflection angle of 90° represents the input signal '1'. Through numerical simulation, the structure realizes three logical operations of NAND, XNOR and OR. Finally, we analyze the performance of the logic gates by extinction ratio. The extinction ratio of the logic gate is up to 10.38 dB when performing OR Boolean operations. Numerically simulated all-optical logic gates can be key components of optical processing and telecommunication equipment.

Electromagnetically induced transparency and Autler-Towns effect in multi-level cascade type system in 133Cs

The probe field propagation through a twelve-level Ξ type atomic system, having two ground energy levels, four intermediate energy levels and six upper energy levels, is studied theoretically in presence of a control field connected from intermediate energy levels to upper energy levels of the transitions of 133Cs atom. Optical Bloch equations (OBEs) for the system are derived by density matrix formalism and are solved numerically under Doppler free and Doppler broadened conditions. The control field can simultaneously remain resonant or nearly resonant with certain hyperfine transitions and highly detuned with respect to other transitions. Under Doppler free condition the probe absorption curve shows multiple electromagnetically induced transparency peaks (EIT) formed within largely separated Autler-Towns (A-T) peaks. The A-T peaks are formed due to the dressing of the hyperfine transitions coupled by a highly detuned control field. The EIT windows get widened with increase in the Rabi frequency of the control field. The numerical result is compared with analytically solved reduced three-level Ξ type system. At room temperature the multiple transparency peaks get masked due to thermal averaging and an overall transparency like feature appears in the simulated Doppler broadened probe absorption curve.

X-ray polarization properties of partially ionized equatorial obscurers around accreting compact objects

ABSTRACT We present the expected X-ray polarization signal resulting from distant reprocessing material around black holes. Using a central isotropic power-law emission at the centre of the simulated model, we add distant equatorial and axially symmetric media that are covering the central accreting sources. We include partial ionization and partial transparency effects, and the impact of various polarization and steepness of the primary radiation spectrum. The results are obtained with the Monte Carlo code STOKES that considers both line and continuum processes and computes the effects of scattering and absorption inside static homogenous wedge-shaped and elliptical toroidal structures, varying in relative size, composition and distance to the source. We provide first order estimates for parsec-scale reprocessing in Compton-thin and Compton-thick active galactic nuclei, as well as winds around accreting stellar-mass compact objects, for observer’s inclinations above and below the grazing angle. The resulting reprocessed polarization can reach tens of per cent with either parallel or perpendicular orientation with respect to the axis of symmetry, depending on subtle details of the geometry, density, and ionization structure. We also show how principal parameters constrained from X-ray spectroscopy or polarimetry in other wavelengths can lift the shown degeneracies in X-ray polarization. We provide an application example of the broad modelling discussion by revisiting the recent IXPE 2–8 keV X-ray polarimetric observation of the accreting stellar-mass black hole in Cygnus X-3 from the perspective of partial transparency and ionization of the obscuring outflows.

Terahertz narrowband filter metasurfaces based on bound states in the continuum.

The electromagnetically induced transparency (EIT) effect realized by metasurfaces have potential for narrowband filtering due to their narrow bandwidth. In optics, bound states in the continuum (BIC) can produce strong localized resonances, which means that light can be trapped and stored for long periods of time to produce very high Q-factors. This has potential applications in designing highly efficient sensors and narrow bandpass filters. Here, we present two metal-flexible dielectric metasurfaces consisting of copper structures and polyimide substrates. Quasi BICs are obtained by breaking C2 symmetry of the metal structures. Resonance-captured quasi-BICs with ultra-high q-factor resonances satisfy the dark modes required to realize the EIT and couple to the bright modes in the structure to achieve narrowband filtering. The peak transmission rates are around 0.9 at 0.29 THz-0.32 THz and 0.23 THz-0.27 THz, respectively. Our results have practical implications for the realization of low-frequency terahertz communications.

Simultaneous Detection of Refractive Index and Temperature in Terahertz Band Based on Electromagnetic Induced Transparency Effect

Simultaneous Detection of Refractive Index and Temperature in Terahertz Band Based on Electromagnetic Induced Transparency Effect

Metamaterial Sensor With Large Incident Angle Based on Electromagnetically Induced Transparency Effect

Metamaterial Sensor With Large Incident Angle Based on Electromagnetically Induced Transparency Effect

Multifunctional active terahertz metasurface with electromagnetically induced transparency, perfect absorption, and circular dichroism

Navigated by the continued demand for design integration and miniaturization, incorporating multiple diversified operations into a single metasurface hybridized with the tunable metasurface is highly demanding at the terahertz (THz) range. However, up to now, because of the limitation of the reconfigurable metasurface at the terahertz range, most metasurfaces only feature a single function or process similar functionalities at a single frequency. A multi-functional terahertz metasurface based on vanadium dioxide (VO2) is proposed in this paper, which consists of a gold layer, a VO2 bridge, a SiO2 spacer, and a VO2 layer on the back of the spacer. Under different conductivity of different VO2 layers, the proposed metasurface achieves various terahertz device functions, including single-band perfect terahertz absorption, circular dichroism (CD) for the reflected and transmitted fields, and electromagnetically induced transparency (EIT) effect. Furthermore, the proposed metasurface exhibits robust response against oblique incidences. The mechanisms of perfect absorption, chiral-selective absorption and EIT are illustrated by impedance matching theory, surface current and electric field distributions, respectively. The function-switching ability of proposed metasurface provides more options for the design of terahertz devices in the future.

Controlled‐NOT Gate Based on the Rydberg States of Surface Electrons

AbstractDue to the long coherence time and efficient manipulation, the surface electron (SE) provides a perfect 2D platform for quantum computation and quantum simulation. In this work, a theoretical scheme to realize the controlled‐NOT gate is proposed, where the two‐qubit system is encoded on the four‐level Rydberg structure of SE. The state transfer is achieved by a three‐level structure with an intermediate level. By simultaneously driving the SE with two external electromagnetic fields, the dark state in the electromagnetically induced transparency effect is exploited to suppress the population of the most dissipative state and increase the robustness against dissipation. The fidelity of the scheme is 0.9989 with experimentally achievable parameters.

Dynamic Modulation of Multilayer Structured Metamaterials Based on Vanadium Dioxide

In order to achieve a better characterized electromagnetic induction transparency (EIT) effect, a temperature-controlled modulated three-layer terahertz (THz) metamaterial structure based on the phase transition properties of vanadium dioxide (VO2) is designed, which is capable of demonstrating independently tunable multi-band broadband EIT effect. Simulations are applied to optimize the structure parametrically by varying the C-type resonator’s the length of the two arms and the interlayer spacing of each dielectric layer. The overall structure coupling is changed by varying the conductivity of the temperature-regulated VO2 to achieve independent dynamic modulation. Finally, the EIT effect is achieved at more than 85% of the frequencies in the 0.8 THz to 2.2 THz region, and the transparency exceeds 0.8. This independently tunable and broadband characteristic is of great interest for the application of the EIT effect.

Combining sensitivity and robustness: EIT-like characteristic in a 2D topological photonic crystal.

The study of topological photonics has gained significant attention due to its potential application for robust and efficient light manipulation. In this work, we theoretically investigate a two-dimensional photonics crystal that exhibits a topological edge state (TES) and a topological corner state (TCS). Furthermore, we also achieve a coupling between a topological corner state and a trivial cavity (TC), resulting in a phenomenon similar to the electromagnetically induced transparency (EIT) effect. To verify the stability of the EIT-like effect, disorders around TES and TCS are introduced, and the theoretical results show that this structure is immune to the disorders. The achievement of the coupling between topological states can have potential applications in the areas of waveguiding, sensing, and logic gates. It is hoped that this work will contribute to the ongoing efforts in the exploration and utilization of topological photonics.

Dynamically Adjusting Borophene-Based Plasmon-Induced Transparency in a Polymer-Separated Hybrid System for Broadband-Tunable Sensing.

Borophene, an emerging two-dimensional (2D) material platform, is capable of supporting highly confined plasmonic modes in the visible and near-infrared wavebands. This provides a novel building block for light manipulation at the deep subwavelength scale, thus making it well-suited for designing ultracompact optical devices. Here, we theoretically explore a borophene-based plasmonic hybrid system comprising a continuous borophene monolayer (CBM) and sodium nanostrip gratings (SNGs), separated by a polymer spacer layer. In such a structure, a dynamically tunable plasmon-induced transparency (PIT) effect can be achieved by strongly coupling dark and bright plasmonic modes, while actively controlling borophene. Here, the bright mode is generated through the localized plasmon resonance of SNGs when directly excited by TM-polarized incident light. Meanwhile, the dark mode corresponds to a propagating borophene surface plasmon (BSP) mode in the CBM waveguide, which cannot be directly excited, but requires phase matching with the assistance of SNGs. The thickness of the polymer layer has a significant impact on the coupling strength of the two modes. Owing to the BSP mode, highly sensitive to variations in the ambient refractive index (RI), this borophene-based hybrid system exhibits a good RI-sensing performance (643.8 nm/RIU) associated with a wide range of dynamically adjustable wavebands (1420-2150 nm) by tuning the electron density of borophene. This work offers a novel concept for designing active plasmonic sensors dependent on electrically gating borophene, which has promising applications in next-generation point-of-care (PoC) biomedical diagnostic techniques.

Terahertz Metasurfaces for Thermally Controlled Optical Encryption

AbstractTerahertz (THz) metasurfaces have emerged as powerful tools to modulate the wavefronts of THz radiation fully. Smart designs and fabrication are essential for enhancing the flexibility and encryption security of THz metasurfaces. In addition to digital coding metasurfaces and microelectromechanical systems, one method to realize dynamic THz metasurfaces is to utilize an active material. In this paper, a dynamic THz metasurface, which is combined with the phase‐change material VO2 and can be thermally controlled to achieve optical encryption, is proposed. Based on the electromagnetically induced transparency effect and by arranging the antennas in advance according to a specific hologram, a secret image can be encoded into the metasurface. At room temperature, the transmitted light field is an irregular light spot with no useful information. If the temperature increases above the phase‐change temperature, the encrypted hologram can be reconstructed. Moreover, owing to the distinct characteristics of VO2, the phase‐change temperature required during decryption is not very high, and the entire process is reversible. It is expected that, in combination with updated processing technology, such metasurfaces can be practically applied to the next generation of optical encryption or optical anticounterfeiting in the future.

Microstructure of macrointerfaces in shape-memory alloys

Shape-memory alloys exhibit a rich microstructure, characterized by large regions containing relatively regular laminates mixing different martensitic variants. Macrointerfaces separate these regions, and are often composed of arrays of needle-shaped martensitic domains. We formulate a model for the geometry of arrays of needles and present numerical simulations, appropriate for two compound twinned variants of martensite in a plane stress setting. One important ingredient is a new class of polyconvex energy densities with cubic symmetry, that is able to reproduce the austenitic elastic constants of the relevant materials. The energy-minimizing needle geometry is determined with tools from shape optimization. Our main finding is the “transparency effect”, which characterizes the effect of needles on domain boundaries located in front of their tip. Our numerical results are in good agreement with experimental observations.