Wireless Signal Transmission Research Articles

Bimodal Tactile Sensor without Signal Fusion for User-Interactive Applications

Tactile sensors with multimode sensing ability are cornerstones of artificial skin for applications in humanoid robotics and smart prosthetics. However, the intuitive and interference-free reading of multiple tactile signals without involving complex algorithms and calculations remains a challenge. Herein a pressure-temperature bimodal tactile sensor without any interference is demonstrated by combining the fundamentally different sensing mechanisms of optics and electronics, enabling the simultaneous and independent sensing of pressure and temperature with the elimination of signal separation algorithms and calculations. The bimodal sensor comprises a mechanoluminescent hybrid of ZnS-CaZnOS and a poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) thermoresistant material, endowing the unambiguous transduction of pressure and temperature into optical and electrical signals, respectively. This device exhibits the highest temperature sensitivity of -0.6% °C-1 in the range of 21-60 °C and visual sensing of the applied forces at a low limitation of 2 N. The interference-free and light-emitting characteristics of this device permit user-interactive applications in robotics for encrypted communication as well as temperature and pressure monitoring, along with wireless signal transmission. This work provides an unexplored solution to signal interference of multimodal tactile sensors, which can be extended to other multifunctional sensing devices.

Fast Photostriction in Ferroelectrics.

Light-induced nonthermal strain, known as the photostrictive effect, offers a potential way to excite mechanical strain and acoustic wave remotely. The anisotropic photostrictive effect induced by the combination of bulk photovoltaic effect (BPVE) and converse piezoelectric effect in ferroelectric materials is known as too small and slow for the applications requiring a high strain rate, such as ultrasound generation and high-speed signal transmission. Here, a strategy to achieve high rate dynamic photostrictive strain by utilizing local fast responses under modulating continuous light excitation in the resonance condition is reported. A strain rate of 8.06 × 10-3 s-1 is demonstrated under continuous light excitation, which is at least one order of magnitude higher than previous studies on bulk samples as seen in the literature. The significant photostrictive response exists even in depoled ferroelectric material without overall polarization. The theoretical analyses show that fast ferroelectric photostriction can be obtained through the combinational interaction mechanism of local BPVE and local converse piezoelectric effect existing only in the microscopic scale, thus circumventing the slow and low efficient BPVE charging up process across the macroscopic electrical terminals. The achieved fast photostriction and new understandings will open new opportunities to realize future wireless signal transmission and light-acoustic devices.

Research on robust adaptive sliding film fault-tolerant control under nonlinear distortion of signal transmission in amorphous flat air-to-ground wireless ad-hoc network system

PurposeTo solve the above problems and ensure the stability of the ad hoc network node topology in the process of wireless signal transmission, this paper aims to design a robust adaptive sliding film fault-tolerant controller under the nonlinear distortion of signal transmission in an amorphous flat air-to-ground wireless ad hoc network system.Design/methodology/approachThis paper designs a robust adaptive sliding film fault-tolerant controller under the nonlinear distortion of signal transmission in an amorphous flat air-to-ground wireless ad hoc network system.FindingsThe simulation results show that the amorphous flat wireless self-organizing network system has good nonlinear distortion fault-tolerant correction ability under the feedback control of the designed controller, and the system has the asymptotically stable convergence ability; the test results show: the node topology of the self-organizing network structural stability is significantly improved, which provides a foundation for the subsequent realization of long-distance transmission of ad hoc network nodes.Research limitations/implicationsBecause of the chosen research approach, the research results may lack generalizability. Therefore, researchers are encouraged to test the proposed propositions further.Originality/valueThe controller can extract the fault information caused by nonlinear distortion in the wireless signal transmission process, and at the same time, its feedback matrix K can gradually converge the generated wireless signal error to zero, to realize the stable transmission of the wireless signal.

Radio communication channel characteristics estimation in the marine environment

The results of data processing obtained in the course of full-scale experiments on the transmission of a short-wave radio signal in the marine environment using special ball antennas are presented. The capacity of the radio communication channel in the modulation frequency band is estimated. Statistical estimates of signals and noises are obtained, which make it possible to calculate decision-making thresholds based on the theory of statistical radio engineering. It is concluded that it is possible to create a two-way voice radio communication channel between mobile underwater objects. Keywords: underwater radio communication, radio communication channel capacity, ball antennas, generalized electrodynamics.

Оценка характеристик канала радиосвязи в морской среде

The results of data processing obtained in the course of full-scale experiments on the transmission of a short-wave radio signal in the marine environment using special ball antennas are presented. The capacity of the radio communication channel in the modulation frequency band is estimated. Statistical estimates of signals and noises are obtained, which make it possible to calculate decision-making thresholds based on the theory of statistical radio engineering. It is concluded that it is possible to create a two-way voice radio communication channel between mobile underwater objects.

Speed and Position Aware Dynamic Routing for Emergency Message Dissemination in VANETs

Vehicular Ad hoc Networks (VANETs) can help reduce traffic-related accidents by broadcasting Emergency Messages (EMs) in advance between vehicles. Due to the high-speed mobility of VANETs and attenuation of the wireless signal, reliable and fast transmission of EMs is a challenging task. Such as the chosen next-hop vehicle may have driven away from the neighborhood of the sender before receiving the EM, and rerouting may increase the delay when the EMs encounter transmission failure. To this end, we propose a Speed and Position aware Dynamic Routing (SPDR) for EM dissemination in VANETs. First, we introduce a speed metric dynamic greedy routing to provide a dynamic hop-by-hop rebroadcast of the EM. SPDR dynamically shrinks the Routing Decision Area (RDA) range based on the velocity variance of candidate neighbors and prioritizes the farthest vehicle in the shrunk RDA as the optimal next-hop, enhancing the reliable transmission of EMs. Then, we present a collaborative forwarding strategy to enable candidate neighbors to collaborate in communication. In case of transmission failure, SPDR elects the candidate vehicle close to the destination as the forwarder to reduce rerouting. Simulations in a practical motorway scenario using NS-2 and VanetMobiSim show that SPDR outperforms the existing protocols in terms of message delivery ratio, network throughput, and average dissemination delay.

The Self-Powered Agricultural Sensing System with 1.7 Km Wireless Multichannel Signal Transmission Using a Pulsed Triboelectric Nanogenerator of Corn Husk Composite Film

The Self-Powered Agricultural Sensing System with 1.7 Km Wireless Multichannel Signal Transmission Using a Pulsed Triboelectric Nanogenerator of Corn Husk Composite Film

2ASK System Modeling and Simulation

The communication network of our country is developing vigorously, and the digital communication system has a certain development prospect. However, for wireless signal transmission, signal modulation is needed to ensure the output results. To use the limited bandwidth to transmit digital signals more efficiently, the corresponding digital signals need to be modulated by the carrier. In this paper, the digital signal is transmitted by carrier modulation, and under the condition of Gaussian white noise, the modelling and simulation of 2ASK modulation and demodulation system are realized by using Simulink and m file respectively, and the anti-noise performance of the system can be seen. And through the m file to achieve non-coherent demodulation and coherent demodulation through the Simulink, we can see the advantages and disadvantages of the two ways. At the end of the paper, the bit error rate of the 2ASK signal is analyzed.

Additive manufacturing of a passive, sensor-monitored 16MnCr5 steel gear incorporating a wireless signal transmission system

The combination of functions in a single component, efficient use of limited space, comprehensive acquisition of process and sensor data and development of passive, wireless monitoring systems are all at the focus of current research. Additive manufacturing is playing an increasingly important role in these developments, because it acts as an enabler for free-form structures, allows access to the interior of the component through its layer-by-layer build-up, and facilitates the processing of a wide variety of materials. Within this work, the aspects mentioned are jointly addressed by the development of a monitored additively manufactured gear (material: 16MnCr5) that communicates wirelessly. This paper shows how an RFID-antenna can be optimized by simulation, incorporated in the design of a metallic gear, then built up in a single manufacturing process and linked to an in-situ inserted sensor board. The approach is validated by fabrication of a sensor-monitored prototype and verified in respect of its functionality and internal structure.

Design o f Wireless Ad Hoc System u sing Adaptive Multi Hop Link State Optimal Routing Protocol

Now a days for the radio network communication multi-hop routing is used. This multi-hop routing technique covers larger coverage area. Therefore to reach at specific location data is transferred in form of packets from one node to other node. But for the transmission of radio signals over the large distance, large number of transreceivers are required and these transreceivers requires large power to operate. As a result, multi-hop routing can saves energy over separate routing. Therefore it is necessity to design a cost effective multi-hop routing technique for successful transmission of ratio packet data. In this paper a hop by hop adaptive link state optional routing (HALO) is explained. It is the first packet transmitting solution with hop by hop and link state routing, which reduces the cost of transporting data across a packet switch network[3]. The triple model is designed for multi hop packet routing. In this work each node of network iteratively and separately improves the small part of traffic bound. This algorithm finds the shortest path of specific location for every iteration and it is calculated by the marginal cost of the various links of network. The marginal link cost is used to calculate the shortest path between the node and the destination location. This marginal link cost is gathered from link state updates. The various networks changes are automatically identified by the adaptive method which is used in this paper. Due to this the exchange between the packets on wrong node is reduced over the overhead traffic. To validate these theoretical results the experimental evaluations and mathematical calculations are also reported in this work. Net beans java is the programmed use in this proposed project.

Musical Information Visualization System

The visualisation systems are spread widely as personal computer’s software. The system, that are processing audio data are presented in this article. The system visualizes the ratio of spectrum amplitudes and has fixed frequency binding to colours. The technology of audio signals processing by the device and components of the device were considered. For the increasing information processing speed was used 32bit controller and graphic equalizer with seven passbands. Music visualization it is function, that are spread widely in mediaplayer’s software, on a different operation systems. This function shows animated images that are depends on music signal. Images are usually reproduced in the real time mode and synchronized with a played audio-track. Music and visualization are merges in the different kind of art: opera, ballett, music drama or movies. Dependencies of auditory and visual sensations are used for increasing the emotional perseption for ordinary listeners . In the systems, that are currently being actively promoted, are used several tools for personal computers, such as: After Effects – The Audio Spectrum Effect, VSDC Video Editor Free – Audio Spectrum Visualizer, Magic Music Visuals. The software, that are mentioned above, has a one disadvantage: the using of streaming video is not possible with the simultaneous receipt of audio and requires processing and rendering of the resulting video series. The purpose of the work is to determine the features of spectral analysis of music information and taking into account real-time data processing. Propose a variant of the music information visualization system, which displays the spectral composition of music and the amplitude of individual harmonics, and filling the LED-matrix with the appropriate color depending on the amplitude of the audio signal, with the possibility of wireless signal transmission from the music source to the visual effects device. The technology of frequency analysis of the spectrum with estimation of amplitude of spectrum’s components of the musical data, that is arriving on the device is chosen for this project. The method is based on the analysis of the spectrum in the selected frequency bands, which in turn simplifies the function of finding maxima at different frequencies. The proposed variant of the musical information visualization system provides display on the LED-matrix of colors that correspond to the frequencies spectrum’s components in the musical composition. Moreover, the number of involved LEDs is proportional to the ratio of the amplitudes of the signal’s frequency components. The desired result is achieved by using a Fast Fourier Transform and selecting Khan or Heming windows for providing a better analysis results of the signal spectrum. The amplitudes of the individual components of the spectrum are estimated additionally and each frequency band has its own color. The work of the system is to analyze the components of the spectrum and frequency of musical information. This information affects the display of colors on the LED matrix. The using of a 32-bit microcontroller provides sufficient speed of audio signal processing with minimal delays. For the increasing the accuracy and speed up the frequency analysis, the sound range is divided into seven bands. For this purpose was used seven-band graphic equalizer MSGEQ7. Music information is transmitted to the system via Bluetooth, which greatly simplifies the selection and connection of the music data source.

Assessment of Active Wheelset Steering System Using Computer Simulations and Roller Rig Tests

The paper is created within a project which aims to design a system of active wheelset steering for an electric four-axle locomotive. The wheelset steering system enables reduction in forces acting in the wheel-rail contacts in a curved track and consequently a reduction in wear and maintenance costs of both vehicles and rails is achieved. The project consists of three main parts: computer simulations, scaled roller rig experiments, and field tests. The paper is focused on the fundamental aspects of the first and the second part on the project. Track curvature estimation based on the rotation of the bogies towards the car body is proposed and assessed by computer simulations across varying track radiuses, vehicle speeds, and friction conditions. The scaled roller rig has been innovated in order to simulate bogie run in a curved track with uncompensated value of lateral acceleration and instrumented with a system of measurement of lateral wheel-rail forces. The experimental bogie has been equipped with systems of active wheelset steering and measurement of axle-box forces. The experiment setup, newly developed and applied systems of forces measurement and wireless signal transmission, and results of the first experiments are described in detail. Performed computer simulations and scaled roller rig experiments show that active wheelset steering is effective and practically implementable method of reducing guiding forces acting between railway vehicle wheels and rails in a curved track.

Discussion on the Safe Broadcast in the Transmission and Transmission of Radio and Television Signals

Discussion on the Safe Broadcast in the Transmission and Transmission of Radio and Television Signals

Preparation of Polyvinyl alcohol Hydrogel Braided Wire Reinforced by Soluble starch Granules Based on Magnetoionic induction and Piezoelectric sensing

AbstractIntegrating textiles with a signal collector may provide sustainable solutions for wearable electronic devices in the Internet of Things era owing to the soaring development of chemistry and materials. This study adopted soluble starch(S) granules for advancing the resistance and formability of polyvinylalcohol (PVA) hydrogel in the structural deformation stage, thus preparing a PVA based composite hydrogel wire that may be produced continuously. In the whole process, the mechanical performance, strain resistance and sensing property of the hydrogel wire were studied. The results showed that when PVA : S=7 : 3, the hydrogel wire had the best formability and mechanical performance, and the stress and strain were 2.3 MPa and 255 % respectively. When starch granules were added in the hydrogel wire, the coincidence degree between starting stress and cyclic stress was increased after the wire was stretched by 17.5 %, and thus, the stability of the hydrogel wire was improved. In addition, the electronic skin strain sensors assembled with hydrogel wires can detect the movement of different parts of the body effectively. In particular, a piezoelectric sensor braided with polyurethane‐encapsulated hydrogel wire may not only generate a voltage about 0.4 mV at a slight touch, but also locate the stress point. When an induction coil is prepared with the hydrogel wire, the magnetoionic induction of a single coil can produce a significant induced voltage, which is conductive to the wireless signal transmission of hydrogel. As a conductor, the hydrogel wire also had a current reaction in phase to AC voltage. And according to the experiment, it is speculated that as braided and electronically integrated, the hydrogel wire can be used in smart fabrics for strain sensing, wireless signal transmission, and force location.

Bandwidth-Based Wake-Up Radio Solution through IEEE 802.11 Technology.

IEEE 802.11 consists of one of the most used wireless access technologies, which can be found in almost all consumer electronics devices available. Recently, Wake-up Radio (WuR) systems have emerged as a solution for energy-efficient communications. WuR mechanisms rely on using a secondary low-power radio interface that is always in the active operation mode and is in charge of switching the primary interface, used for main data exchange, from the power-saving state to the active mode. In this paper, we present a WuR solution based on IEEE 802.11 technology employing transmissions of legacy frames by an IEEE 802.11 standard-compliant transmitter during a Transmission Opportunity (TXOP) period. Unlike other proposals available in the literature, the WuR system presented in this paper exploits the PHY characteristics of modern IEEE 802.11 radios, where different signal bandwidths can be used on a per-packet basis. The proposal is validated through the Matlab software tool, and extensive simulation results are presented in a wide variety of scenario configurations. Moreover, insights are provided on the feasibility of the WuR proposal for its implementation in real hardware. Our approach allows the transmission of complex Wake-up Radio signals (i.e., including address field and other binary data) from legacy Wi-Fi devices (from IEEE 802.11n-2009 on), avoiding hardware or even firmware modifications intended to alter standard MAC/PHY behavior, and achieving a bit rate of up to 33 kbps.

Variability and trends in rain height retrieved from GPM and implications on rain-induced attenuation over Nigeria

To meet the rising demand for uninterrupted high-speed broadband internet services, the deployment of high-frequency bands for the transmission of radio signals is inevitable. Unfortunately, attenuation due to rain droplets remains the most challenging factor impeding effective radio wave propagation especially in earth-space satellite links operating at Ka and V bands. It is important to understand the attenuation and the parameters that determine its magnitude in order to provide an effective solution to this problem. Rain height as one of the attenuation input parameters was examined in detail. A study of its temporal evolution reveals that seasonal variation is insignificant while the spatial variation shows that it increases from the Sahel to the Coastal Zone of Nigeria. The work provides comprehensive rain height and rain-induced attenuation contour maps. These maps are expected to serve as a database for link budget calculations for different areas in Nigeria. Rain-induced attenuation maps for 1%, 0.1%, and 0.01% of time exceedance are provided at 20 GHz and 40 GHz for Ka and V band signals respectively.

Finite element simulation and frequency optimization for wireless signal transmission through RC structures

The enclosed civil structures pose a challenging environment for wireless communication between sensor nodes. Wireless electromagnetic (EM) signal attenuates significantly when transmitting through reinforced concrete structures. This paper simulates the signal attenuation for plain concrete, pure steel rebar lattice and reinforced concrete using finite element method (FEM) in Ansoft High Frequency Structure Simulator (HFSS). Jonscher model is found to be a better concrete dielectric model than Debye model from the attenuation test results. FEM simulation for signal attenuation of reinforced concrete (RC) slab is validated by finite difference time domain (FDTD) simulation and test results from literature. Optimal frequency to minimize the signal attenuation through RC structure is in the range of 0.35 GHz ~ 0.5 GHz. Resonance occurs at t / (λc/4) = 2n and t / (λc/4) = 2n + 1, n = 1, 2, 3, 4, ... for low concrete volumetric water content (VWC). Signal attenuation is highly linear with slab thickness t for high concrete VWC. 433 MHz is suggested for real application of wireless sensor network considering the antenna size and optimization results. FEM simulation is validated by the experiment using intact wireless sensor nodes.

Low area FPGA Implementation of Secure MIMO OFDM based Wireless ECG Signal Transmission

Low area FPGA Implementation of Secure MIMO OFDM based Wireless ECG Signal Transmission

Discussion on Safe Broadcasting in Transmission and Emission of Radio and TV Signals

Discussion on Safe Broadcasting in Transmission and Emission of Radio and TV Signals

Experimental comparison of DSB and CS-DSB mmW formats over a hybrid fiber and FSO fronthaul network for 5G.

The telecommunication world is experiencing the 5th generation (5G) networks deployment including the use of millimeter wave (mmW) frequency bands to satisfy capacity demands. This leads to the extensive use of optical communications, especially the optical fiber connectivity at the last mile access and the edge networks. In this paper we outline fiber and free space optics (FSO) technologies for use as part of the 5G optical fronthaul network. We investigate two different mmW transmission schemes based on (i) the conventional analog radio over fiber transmission using one Mach-Zehnder modulator (MZM) with double sideband (DSB) optical modulation, and (ii) an optical-based frequency doubling with one MZM biased at the null point to introduce carrier suppression DSB (CS DSB) transmission and second MZM used for data modulation. Both systems are assessed in terms of the error vector magnitude, signal-to-noise ratio, dynamic range and phase noise. We consider a configuration for the fronthaul network in the frequency range 2 (FR2) at 27 and 39 GHz with the scale of bandwidth up to 400 MHz with M-quadrature amplitude modulation and quadrature phase shift keying. Results are also shown for FR1 at 3.5 GHz. Moreover, we investigate for the first time the 5G new radio signal transmission under strong turbulence conditions and show the turbulence-induced FSO link impairment. We finally demonstrate the CS DSB scheme performs well under chromatic dispersion-induced fading for the frequency up to 40 GHz and single mode fiber length of 30 km, whereas the DSB format seems more appropriate for an antenna seamless transmission.