Transmission Electron Microscopy-electron Energy Loss Research Articles

In Situ Monitoring of the Polymerization Kinetics of Organic Pollutants during Persulfate-Based Advanced Oxidation Processes Using Plasmonic Colorimetry.

Using sulfate radicals to initiate polymer production in persulfate-based advanced oxidation processes (AOPs) is an emerging strategy for organics removal. However, our understanding of this process remains limited due to a dearth of efficient methods for in situ and real time monitoring of polymerization kinetics. This study leverages plasmonic colorimetry to monitor the polymerization kinetics of an array of aromatic pollutants in the presence of sulfate radicals. We observed that the formation of polymer shells on the surfaces of gold nanoparticles (AuNPs) led to an increase and red shift in their localized surface plasmon resonance (LSPR) band as a result of an increased refractive index surrounding the AuNP surfaces. This observation aligns with Mie theory simulations and transmission electron microscopy-electron energy loss spectroscopy characterizations. Our study demonstrated that the polymerization kinetics exhibits a significant reliance on the electrophilicity and quantity of benzene rings, the concentration of aromatic pollutants, and the dosage of oxidants. In addition, we found that changes in LSPR band wavelength fit well into a pseudo-first-order kinetic model, providing a comprehensive and quantitative insight into the polymerization kinetics involving diverse organic compounds. This technique holds the potential for optimizing AOP-based water treatment by facilitating the polymerization of aromatic pollutants.

Visualization of the Active Sites of Zinc-Chromium Oxides and the CO/H2 Activation Mechanism in Direct Syngas Conversion.

Despite wide studies demonstrating the versatility of the metal oxide-zeolite (OXZEO) catalyst concept to tackle the selectivity challenge in syngas chemistry, the active sites of metal oxides and the mechanism of CO/H2 activation remain to be elucidated. Herein, we demonstrate experimentally the role of Cr in zinc-chromium oxides and unveil visually, for the first time, the active sites for CO activation employing scanning transmission electron microscopy-electron energy loss spectroscopy using the volumetric density of surface carbon species as a descriptor. The ZnCr2O4 spinel surface with atomic ZnOx overlayer is the most active site for C-O bond dissociation, particularly at the narrow ZnCr2O4(110) facets constrained between the (311) and (111) facets, followed by the Cr-doped wurtzite ZnO surface. In comparison, the surfaces of ZnCr2O4 with aggregated ZnOx overlayers, pure ZnO, and the stoichiometric ZnCr2O4 exhibit a significantly lower activity. In situ synchrotron-based vacuum ultraviolet photoionization mass spectrometric study on different temperature programmed surface reactions with isotopes of C18O, 13CO, and D2 validates direct CO dissociation over ZnCrn oxides in CO, forming CH2 and further to hydrocarbons if H2 is present and CH2CO intermediates in syngas. The activity of CO dissociation and hydrogenation over ZnCrn oxides correlates well with the syngas-to-light-olefins activity of ZnCrn-SAPO-18 composite catalysts as a function of the Cr/Zn ratio.

Charge Distribution across Capped and Uncapped Infinite-Layer Neodymium Nickelate Thin Films.

Charge ordering (CO) phenomena have been widely debated in strongly-correlated electron systems mainly regarding their role in high-temperature superconductivity. Here, the structural and charge distribution in NdNiO2 thin films prepared with and without capping layers, and characterized by the absence and presence of CO are elucidated. The microstructural and spectroscopic analysis is done by scanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS) and hard X-ray photoemission spectroscopy (HAXPES). Capped samples show Ni1+ , with an out-of-plane (o-o-p) lattice parameter of around 3.30 Å indicating good stabilization of the infinite-layer structure. Bulk-sensitive HAXPES on Ni-2p shows weak satellite features indicating large charge-transfer energy. The uncapped samples evidence an increase of the o-o-p parameter up to 3.65 Å on the thin film top with a valence toward Ni2+ in this region. Here, 4D-STEM demonstrates (303)-oriented stripes which emerge from partially occupied apical oxygen. Those stripes form quasi-2D coherent domains viewed as rods in the reciprocal space with Δqz ≈ 0.24 reciprocal lattice units (r.l.u.) extension located at Q = ( ) and ( ) r.l.u. The stripes associated with oxygen re-intercalation concomitant with hole doping suggest a possible link to the previously reported CO in infinite-layer nickelate thin films.

Effect of Spatial Heterogeneity on the Unusual Uptake Behavior of Multivariate-Metal-Organic Frameworks.

The uniqueness of multivariate metal-organic frameworks (MTV-MOFs) has been widely explored to discover their unknown opportunities. While mesoscopic apportionments have been studied, macroscopic heterogeneity and its spatial effects remain unexplored in MTV-MOFs. In this study, we investigated the effect of macroscopic heterogeneity on MTV-MOFs on their uptake behaviors by comparing three types of MTV-MOFs having the functional groups in inner, outer, or entire parts of crystals. Their adsorption behavior for carbon dioxide (CO2) and water (H2O) brought out that functional groups located in the outer part of the crystals dominantly influence the sorption behavior of MTV-MOFs. These results are also visualized by observing iodine adsorption in the three types of MTV-MOFs using scanning transmission electron microscopy-electron energy loss spectroscopy. We believe that this finding provides new ways to decipher and design MTV-MOFs for their unusual properties.

Machine Learning-Aided Design of Gold Core-Shell Nanocatalysts toward Enhanced and Selective Photooxygenation.

We demonstrate the use of the machine learning (ML) tools to rapidly and accurately predict the electric field as a guide for designing core-shell Au-silica nanoparticles to enhance 1O2 sensitization and selectivity of organic synthesis. Based on the feature importance analysis, obtained from a deep neural network algorithm, we found a general and linear dependent descriptor (θ ∝ aD0.25t-1, where a, D, and t are the shape constant, size of metal nanoparticles, and distance from the metal surface) for the electric field around the core-shell plasmonic nanoparticle. Directed by the new descriptor, we synthesized gold-silica nanoparticles and validated their plasmonic intensity using scanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS) mapping. The nanoparticles with θ = 0.40 demonstrate an ∼3-fold increase in the reaction rate of photooxygenation of anthracene and 4% increase in the selectivity of photooxygenation of dihydroartemisinic acid (DHAA), a long-standing goal in organic synthesis. In addition, the combination of ML and experimental investigations shows the synergetic effect of plasmonic enhancement and fluorescence quenching, leading to enhancement for 1O2 generation. Our results from time-dependent density functional theory (TD-DFT) calculations suggest that the presence of an electric field can favor intersystem crossing (ISC) of methylene blue to enhance 1O2 generation. The strategy reported here provides a data-driven catalyst preparation method that can significantly reduce experimental cost while paving the way for designing photocatalysts for organic drug synthesis.

Atomistic Simulation Informs Interface Engineering of Nanoscale LiCoO2.

Lithium-ion batteries continue to be a critical part of the search for enhanced energy storage solutions. Understanding the stability of interfaces (surfaces and grain boundaries) is one of the most crucial aspects of cathode design to improve the capacity and cyclability of batteries. Interfacial engineering through chemical modification offers the opportunity to create metastable states in the cathodes to inhibit common degradation mechanisms. Here, we demonstrate how atomistic simulations can effectively evaluate dopant interfacial segregation trends and be an effective predictive tool for cathode design despite the intrinsic approximations. We computationally studied two surfaces, {001} and {104}, and grain boundaries, Σ3 and Σ5, of LiCoO2 to investigate the segregation potential and stabilization effect of dopants. Isovalent and aliovalent dopants (Mg2+, Ca2+, Sr2+, Sc3+, Y3+, Gd3+, La3+, Al3+, Ti4+, Sn4+, Zr4+, V5+) were studied by replacing the Co3+ sites in all four of the constructed interfaces. The segregation energies of the dopants increased with the ionic radius of the dopant. They exhibited a linear dependence on the ionic size for divalent, trivalent, and quadrivalent dopants for surfaces and grain boundaries. The magnitude of the segregation potential also depended on the surface chemistry and grain boundary structure, showing higher segregation energies for the Σ5 grain boundary compared with the lower energy Σ3 boundary and higher for the {104} surface compared to the {001}. Lanthanum-doped nanoparticles were synthesized and imaged with scanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS) to validate the computational results, revealing the predicted lanthanum enrichment at grain boundaries and both the {001} and the {104} surfaces.

Electron Microscopy Probing Electron-Photon Interactions in SiC Nanowires with Ultrawide Energy and Momentum Match.

Light-matter interactions are commonly probed by optical spectroscopy, which, however, has some fundamental limitations such as diffraction-limited spatial resolution, tiny momentum transfer, and noncontinuous excitation/detection. In this work, through the use of scanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS) with ultrawide energy and momentum match and subnanometer spatial resolution, the longitudinal Fabry-Perot (FP) resonating modes and the transverse whispering-gallery modes (WGMs) in individual SiC nanowires are simultaneously excited and detected, which span from near-infrared (∼1.2 μm) to ultraviolet (∼0.2 μm) spectral regime, and the momentum transfer can range up to 108 cm-1. The size effects on the resonant spectra of nanowires are also revealed. This work provides an alternative technique to optical resonating spectroscopy and light-matter interactions in dielectric nanostructures, which is promising for modulating free electrons via photonic structures.

Imaging of isotope diffusion using atomic-scale vibrational spectroscopy.

The spatial resolutions of even the most sensitive isotope analysis techniques based on light or ion probes are limited to a few hundred nanometres. Although vibrational spectroscopy using electron probes has achieved higher spatial resolution1-3, the detection of isotopes at the atomic level4 has been challenging so far. Here we show the unambiguous isotopic imaging of 12C carbon atoms embedded in 13C graphene and the monitoring of their self-diffusion via atomic-level vibrational spectroscopy. We first grow a domain of 12C carbon atoms in a pre-existing crack of 13C graphene, which is then annealed at 600 degrees Celsius for several hours. Using scanning transmission electron microscopy-electron energy loss spectroscopy, we obtain an isotope map that confirms the segregation of 12C atoms that diffused rapidly. The map also indicates that the graphene layer becomes isotopically homogeneous over 100-nanometre regions after 2 hours. Our results demonstrate the high mobility of carbon atoms during growth and annealing via self-diffusion. This imaging technique can provide a fundamental methodology for nanoisotope engineering and monitoring, which will aid in the creation of isotope labels and tracing at the nanoscale.

Fabrication of chemically and structurally abrupt Eu1−xLaxO/SrO/Si interfaces and their analysis by STEM-EELS

Precise control of molecular-beam epitaxy deposition conditions has enabled the fabrication of chemically and structurally abrupt ${\mathrm{Eu}}_{1\ensuremath{-}x}{\mathrm{La}}_{x}\mathrm{O}/\mathrm{SrO}/\mathrm{Si}$ interfaces by interposing as little as half a monolayer of SrO between the La-doped EuO and silicon. The interfaces were analyzed by scanning transmission electron microscopy-electron energy loss spectroscopy; no reaction products were detected. These abrupt interfaces might enable direct ohmic injection of spin-polarized currents from the doped half-metallic semiconductor EuO into silicon.

Phase analysis of hydrogen contained Zr-2.5wt%Nb CANDU pressure tube using plasmon energy loss analysis

Canada Deuterium Uranium (CANDU) reactors use Zr-2.5Nb alloys as the pressure tube material. Ensuring optimal performance of Zr-2.5Nb pressure tubes is vital to the safety of CANDU-type heavy water reactors. Long-term use of the pressure tube induces hydrogen pickup and hydride precipitation, causing delayed hydride cracking. Therefore, to evaluate the mechanical integrity of the pressure tube, it is critical to determine the phase distributions inside the pressure tube during hydrogen charging. This study focuses on visually expressing the hydride phasesusingscanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS).By using EELS, two phase characterization possibilities were noted at the phase boundary between α-Zr and δ-hydride: nucleated β-Zr and γ-hydride and a mechanical mixture of α-Zr and δ-hydride. The first characterization possibility was reported previously by Barrowet al., and the second possibility is described comprehensively in this paper.

NiCo2S4 Bi-metal Sulfide Coating on LiNi0.6Co0.2Mn0.2O2 Cathode for High-Performance All-Solid-State Lithium Batteries.

NiCo2S4 nanoparticles (NPs) were dry coated on LiNi0.6Co0.2Mn0.2O2 (NCM622) cathode using a resonant acoustic coating technique to produce all-solid-state lithium batteries. The NiCo2S4 coating improved the electrochemical properties of the NCM622 cathode. In addition, NiCo2S4 eliminated the space-charge layer and the cathode showed an excellent affinity with the interface with a sulfide-based solid electrolyte as an inert material. X-ray diffraction patterns of NCM622 coated with NiCo2S4 showed the same peak separations and lattice parameters as those of bare NCM622. Field-emission scanning electron microscopy and electron dispersive spectroscopy mapping analyses showed that 0.3 wt% NiCo2S4-coated NCM622 had an evenly modified surface with NiCo2S4 NPs. X-ray photoelectron spectroscopy (XPS) revealed that the surface of 0.3 wt% NiCo2S4-coated NCM622 had two different S 2p peaks, a Co–S peak, and Ni and Co peaks, compared to those of bare NCM622. Electrochemical studies with electrochemical impedance spectroscopy and galvanostatic charge–discharge cycle performances showed that NiCo2S4-coated NCM622 retained a higher specific capacity over multiple cycles than bare NCM622. Especially, 0.3 wt% NiCo2S4-coated NCM622 exhibited a capacity retention of 60.6% at a current density of 15 mA/g for 20 cycles, compared to only 37.3% for bare NCM622. Finally, interfacial XPS and transmission electron microscopy-electron energy loss spectroscopy analyses confirmed the stable state of 0.3 wt% NiCo2S4-coated NCM622 with minimal side reactions.

Plasmonic evolution of atomically size-selected Au clusters by electron energy loss spectrum.

The plasmonic response of gold clusters with atom number (N) = 100–70 000 was investigated using scanning transmission electron microscopy-electron energy loss spectroscopy. For decreasing N, the bulk plasmon remains unchanged above N = 887 but then disappears, while the surface plasmon firstly redshifts from 2.4 to 2.3 eV above N = 887 before blueshifting towards 2.6 eV down to N = 300, and finally splitting into three fine features. The surface plasmon's excitation ratio is found to follow N0.669, which is essentially R2. An atomically precise evolution picture of plasmon physics is thus demonstrated according to three regimes: classical plasmon (N = 887–70 000), quantum confinement corrected plasmon (N = 300–887) and molecule related plasmon (N < 300).

Tents, Chairs, Tacos, Kites, and Rods: Shapes and Plasmonic Properties of Singly Twinned Magnesium Nanoparticles.

Nanostructures of some metals can sustain light-driven electron oscillations called localized surface plasmon resonances, or LSPRs, that give rise to absorption, scattering, and local electric field enhancement. Their resonant frequency is dictated by the nanoparticle (NP) shape and size, fueling much research geared toward discovery and control of new structures. LSPR properties also depend on composition; traditional, rare, and expensive noble metals (Ag, Au) are increasingly eclipsed by earth-abundant alternatives, with Mg being an exciting candidate capable of sustaining resonances across the ultraviolet, visible, and near-infrared spectral ranges. Here, we report numerical predictions and experimental verifications of a set of shapes based on Mg NPs displaying various twinning patterns including (101̅1), (101̅2), (101̅3), and (112̅1), that create tent-, chair-, taco-, and kite-shaped NPs, respectively. These are strikingly different from what is obtained for typical plasmonic metals because Mg crystallizes in a hexagonal close packed structure, as opposed to the cubic Al, Cu, Ag, and Au. A numerical survey of the optical response of the various structures, as well as the effect of size and aspect ratio, reveals their rich array of resonances, which are supported by single-particle optical scattering experiments. Further, corresponding numerical and experimental studies of the near-field plasmon distribution via scanning transmission electron microscopy electron-energy loss spectroscopy unravels a mode nature and distribution that are unlike those of either hexagonal plates or cylindrical rods. These NPs, made from earth-abundant Mg, provide interesting ways to control light at the nanoscale across the ultraviolet, visible, and near-infrared spectral ranges.

Manipulation of surface phonon polaritons in SiC nanorods

Surface phonon polaritons (SPhPs) are potentially very attractive for subwavelength control and manipulation of light at the infrared to terahertz wavelengths. Probing their propagation behavior in nanostructures is crucial to guide rational device design. Here, aided by monochromatic scanning transmission electron microscopy-electron energy loss spectroscopy technique, we measure the dispersion relation of SPhPs in individual SiC nanorods and reveal the effects of size and shape. We find that the SPhPs can be modulated by the geometric shape and size of SiC nanorods. The energy of SPhPs shows red-shift with decreasing radius and the surface optical phonon is mainly concentrated on the surface with large radius. Therefore, the fields can be precisely confined in specific positions by varying the size of the nanorod, allowing effective tuning at nanometer scale. The findings of this work are in agreement with dielectric response theory and numerical simulation, and provide novel strategies for manipulating light in polar dielectrics through shape and size control, enabling the design of novel nanoscale phonon-photonic devices.

Spectrally tunable infrared plasmonic F,Sn:In2O3 nanocrystal cubes.

A synthetic challenge in faceted metal oxide nanocrystals (NCs) is realizing tunable localized surface plasmon resonance (LSPR) near-field response in the infrared (IR). Cube-shaped nanoparticles of noble metals exhibit LSPR spectral tunability limited to visible spectral range. Here, we describe the colloidal synthesis of fluorine, tin codoped indium oxide (F,Sn:In2O3) NC cubes with tunable IR range LSPR for around 10 nm particle sizes. Free carrier concentration is tuned through controlled Sn dopant incorporation, where Sn is an aliovalent n-type dopant in the In2O3 lattice. F shapes the NC morphology into cubes by functioning as a surfactant on the {100} crystallographic facets. Cube shaped F,Sn:In2O3 NCs exhibit narrow, shape-dependent multimodal LSPR due to corner, edge, and face centered modes. Monolayer NC arrays are fabricated through a liquid-air interface assembly, further demonstrating tunable LSPR response as NC film nanocavities that can heighten near-field enhancement (NFE). The tunable F,Sn:In2O3 NC near-field is coupled with PbS quantum dots, via the Purcell effect. The detuning frequency between the nanocavity and exciton is varied, resulting in IR near-field dependent enhanced exciton lifetime decay. LSPR near-field tunability is directly visualized through IR range scanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS). STEM-EELS mapping of the spatially confined near-field in the F,Sn:In2O3 NC array interparticle gap demonstrates elevated NFE tunability in the arrays.

Dynamic behavior of helium bubbles at high temperature in Si studied by in situ TEM, STEM-EELS, and TDS

We demonstrated, using in situ transmission electron microscopy (TEM), the random motion of helium bubbles formed by irradiation with helium ions in an FZ (011)Si specimen at high temperatures. Analysis of the random motion yielded the bubble diffusivity, which was dependent on the bubble size and the annealing temperature. The helium density in individual bubbles, measured using scanning transmission electron microscopy-electron energy loss spectroscopy, was as high as 70 ± 14 He/nm3. It was dependent on the irradiation temperature, beam flux, and annealing temperature but was independent of the bubble size. The bubbles retained a high density of helium atoms at around 800 K, but a significant reduction of the helium density within individual bubbles took place after annealing above about 970 K. Thermal desorption of helium from the specimen, measured using thermal desorption spectroscopy, occurred at temperatures between 650 K and 1100 K, centering at around 890 K. TEM revealed the corresponding microstructure. On the basis of these results, the thermal desorption profile was discussed in terms of the release of helium at lower temperatures from migrating and coalescing overpressurized bubbles and bubbles migrating to the specimen surface, and at higher temperatures from stationary large bubbles.

(Invited) Tuning Optoelectronic Properties of Transition Metal Dichalcogenides for Hydrogen Generation

We tune the optical and electronic properties of 2D transition metal dichalcogenides (TMDCs) – MoS2, MoSe2, WS2, and WSe­2– to control the surface conductivity, energetics, and ultimately reactivity. The optoelectronic properties of monolayer and few-layered TMDCs are tuned by surface functionalization, environmental control, and phase engineering. These modifications have a direct impact on the surface reactivity for hydrogen generation. Specifically, we directly map the surface energetics, phase, and reactivity with scanning electrochemical microscopy, scanning Kelvin probe microscopy, confocal Raman/photoluminescence, and scanning transmission electron microscopy-electron energy loss spectroscopy. Moreover, we disentangle the influence of O2and H2O molecules on the surface of TMDCs, where these molecules impact the optoelectronic properties and can influence the potential applications of monolayer TMDCs in (photo)electrocatalysis.

Atomic-Scale Valence State Distribution inside Ultrafine CeO2 Nanocubes and Its Size Dependence.

Atomic-scale analysis of the cation valence state distribution will help to understand intrinsic features of oxygen vacancies (VO ) inside metal oxide nanocrystals, which, however, remains a great challenge. In this work, the distribution of cerium valence states across the ultrafine CeO2 nanocubes (NCs) perpendicular to the {100} exposed facet is investigated layer-by-layer using state-of-the-art scanning transmission electron microscopy-electron energy loss spectroscopy. The effect of size on the distribution of Ce valence states inside CeO2 NCs is demonstrated as the size changed from 11.8 to 5.4 nm, showing that a large number of Ce3+ cations exist not only in the surface layers, but also in the center layers of smaller CeO2 NCs, which is in contrast to those in larger NCs. Combining with the atomic-scale analysis of the local structure inside the CeO2 NCs and theoretical calculation on the VO forming energy, the mechanism of size effect on the Ce valence states distribution and lattice expansion are elaborated: nano-size effect induces the overall lattice expansion as the size decreased to ≈5 nm; the expanded lattice facilitates the formation of VO due to the lower formation energy required for the smaller size, which, in principle, provides a fundamental understanding of the formation and distribution of Ce3+ inside ultrafine CeO2 NCs.

Electric field-triggered metal-insulator transition resistive switching of bilayered multiphasic VOx

Electric field-triggered Mott transition of VO2 for next-generation memory devices with sharp and fast resistance-switching response is considered to be ideal but the formation of single-phase VO2 by common deposition techniques is very challenging. Here, VOx films with a VO2-dominant phase for a Mott transition-based metal-insulator transition (MIT) switching device were successfully fabricated by the combined process of RF magnetron sputtering of V metal and subsequent O2 annealing to form. By performing various material characterizations, including scanning transmission electron microscopy-electron energy loss spectroscopy, the film is determined to have a bilayer structure consisting of a VO2-rich bottom layer acting as the Mott transition switching layer and a V2O5/V2O3 mixed top layer acting as a control layer that suppresses any stray leakage current and improves cyclic performance. This bilayer structure enables excellent electric field-triggered Mott transition-based resistive switching of Pt-VOx-Pt metal-insulator-metal devices with a set/reset current ratio reaching ~200, set/reset voltage of less than 2.5 V, and very stable DC cyclic switching upto ~120 cycles with a great set/reset current and voltage distribution less than 5% of standard deviation at room temperature, which are specifications applicable for neuromorphic or memory device applications.

Forming-less and Non-Volatile Resistive Switching in WOX by Oxygen Vacancy Control at Interfaces

Resistive switching devices are recognized as candidates for next-generation memory devices in that they can replace conventional memory devices. In these devices, a WOX film deposited by RF magnetron sputtering with a significant number of oxygen vacancies exhibits a resistive switching property and does not involve the use of a forming process. The resistive switching mechanism involves the hopping of electrons through the sub-band states of the oxygen vacancies in E-field-driven electromigration. X-ray photoemission spectroscopy, ultra-violet photoemission spectroscopy, and transmission electron microscopy-electron energy loss spectroscopy were performed to analyze local variations in the O-vacancies and in the electronic band structure of a WOX thin film. The band structure is responsible for the correlation between the motion of the electrons under the interface effect at the electrodes with the change in the resistance and the bias-polarity dependence of the I-V property of the device. The optimized metal-insulator-metal structure (Pt/WOX/Au), which has an asymmetric electrode and many oxygen vacancies, gives rise to excellent resistive-switching properties with a high on/off ratio on the order of 105 times, a low set voltage of <0.34 V, and a uniform DC cyclic performance in the order of 1500 cycles at room temperature. These specifications can be further adopted for application to non-volatile memory-device applications.