Transition Metals Iron Research Articles

The Transcriptomic Response of Cells of the Thermophilic Bacterium Geobacillus icigianus to Terahertz Irradiation

As areas of application of terahertz (THz) radiation expand in science and practice, evidence is accumulating that this type of radiation can affect not only biological molecules directly, but also cellular processes as a whole. In this study, the transcriptome in cells of the thermophilic bacterium Geobacillus icigianus was analyzed immediately after THz irradiation (0.23 W/cm2, 130 μm, 15 min) and at 10 min after its completion. THz irradiation does not affect the activity of heat shock protein genes and diminishes the activity of genes whose products are involved in peptidoglycan recycling, participate in redox reactions, and protect DNA and proteins from damage, including genes of chaperone protein ClpB and of DNA repair protein RadA, as well as genes of catalase and kinase McsB. Gene systems responsible for the homeostasis of transition metals (copper, iron, and zinc) proved to be the most sensitive to THz irradiation; downregulation of these systems increased significantly 10 min after the end of the irradiation. It was also hypothesized that some negative effects of THz radiation on metabolism in G. icigianus cells are related to disturbances in activities of gene systems controlled by metal-sensitive transcription factors.

Theoretical Investigation of Transition Metal (Cr, Fe)-Doped AlN in a rocksalt structure: A DFT Study on Physical Properties

This study presents first-principles computations to explore the structural, electronic, optical, elastic, vibrational, and thermodynamic properties of Aluminum Nitride (AlN) doped with the transition metals Chromium (Cr) and Iron (Fe) in the rocksalt structure. Using spin-polarized density functional theory (DFT) within the CASTEP code, we applied GGA-PBE, GGA+U, and HSE06 approximations for exchange-correlation functions. Our results reveal that Cr doping transforms AlN into a dilute magnetic semiconductor (DMS), while Fe doping induces a transition to a metallic state. Both Al0.₇₅Cr₀.₂₅N and Al₀.₇₅Fe₀.₂₅N exhibit strong covalent bonding, contributing to enhanced hardness. The substantial increase in static dielectric constant and refractive index suggests strong optical responses. Furthermore, our analysis confirms the mechanical and dynamic stability of these compounds. Al₀.₇₅Cr₀.₂₅N is a promising candidate for electronic and spintronic applications, whereas Al₀.₇₅Fe₀.₂₅N, with its high conductivity, is well-suited for magnetic storage devices and electrical contacts. Our findings for AlN are consistent with prior theoretical and experimental data, while the results for Al₀.₇₅Cr₀.₂₅N and Al₀.₇₅Fe₀.₂₅N offer novel insights for future research.

A colorimetric platform using highly active Prussian blue composite nanocubes for the rapid determination of ascorbic acid and acid phosphatase.

Cobalt-doped Prussian blue composite nanocubes (Co-PB NCs) were synthesized, which can quickly convert O2 to O2•- and 1O2. Due to the presence of cobalt and iron transition metal redox electron pairs, Co-PB NCs with high oxidase mimetic activity can rapidly oxidize the substrate 3,3',5,5'-tetramethylbenzidine (TMB) to produce blue products (ox-TMB) without the assistance of unstable H2O2. Using ascorbic acid-2-phosphate trisodium salt (AAP) as a substrate, it can be converted to reduced ascorbic acid (AA) under acid phosphatase (ACP) hydrolysis, resulting in suppression of TMB oxidation. Therefore, an enzyme cascade signal amplification strategy for rapid colorimetric detection of AA/ACP was developed based on the high-efficiency oxidase-like activity of Co-PB NCs combined with the hydrolysis effect of ACP. The color changes at low concentrations of AA and ACP could be observed by the naked eye, and the detection limits of AA and ACP were 1.67μM and 0.0266 U/L, respectively. The developed colorimetric method was applied to the determination of AA in beverages and ACP in human serum, and the RSDs were less than 3%, showing good reproducibility. This work provides a promising strategy for the use of metal-doped Prussian blue composite material for the construction of rapid colorimetric sensing platforms that avoid the use of unstable hydrogen peroxide.

One-pot bioinspired synthesis of PbO/CuO/FeO trimetallic oxide nanocomposite using Vitis vinifera fruit juice for highly sensitive electrochemical detection of 4-Nitrotoluene

The determination of explosive nitroaromatic chemicals has prompted concerns about human safety around the world. In this work, we demonstrate an electrochemical sensor based on trimetallic oxide nanocomposites modified screen-printed carbon electrode (SPCE) for the detection of nitroaromatic compounds. Trimetallic oxide nanocomposites are multiphase materials containing ternary metal oxides. Because of their high specific surface area, superior electron transport capabilities, and favourable catalytic behaviour, they are frequently employed as antibacterial materials, catalysts, and sensors. In order to combat the problems associated with high manufacturing costs, low selectivity, and low sensitivity of conventional sensors, this paper reports on the construction of an electrochemical sensor for 4-nitrotoluene (4-NT) using a trimetallic oxide nano-sensor. The nano-sensor is composed of transition metal oxides copper and iron combined with post-transition lead metal oxide. In this study, we prepared a PbO/CuO/FeO TMO NCs sample with different individual metal oxides synthesized by a green reduction method using Vitis vinifera fruit juice. SEM was used to observe and validate structural and morphological variations brought on by various metal compositions. The four bio-synthesized materials comprise dispersed multiphase matrices containing varying shapes of nanoparticles with different morphologies. The elemental and phase arrangements of the synthesized samples were investigated employing UV, FT-IR, XRD, and EDAX approaches. The findings of the electrochemical measurements indicate that the SPCE modified with PbO/CuO/FeO TMO NCs has enhanced sensing capabilities over CuO, FeO, and PbO NPs for 4-NT; the limit of detection is 4.512 nM and sensitivity is −0.531 μA nM−1 for the developed sensor. Notably, recovery values (99.2–101.7 %) in water samples showed that evaluating interfering species from different contaminants had no effect on the sensing of 4-NT. All of these findings show that the newly developed sensor performs well in terms of reproducibility, selectivity, and sensitivity for the detection of 4-NT

Eco-friendly nanocomposite particles CuO/Fe2O3 and CuFeO2 as corrosion inhibitors of reinforced steel for concrete

Abstract In the last period of scientific research, the application of nanoscale materials had a huge interest in enhancing sustainability and improving the performance of concrete. This paper discusses lots of experimental truths about nanoparticles (CuO, Fe2O3) and nanocomposite particles (CuFeO2 and CuO/Fe2O3), which are manufactured by green chemistry and their effect on concrete. Because of their advanced properties due to containing the two heavy transition metals iron and copper, these particles can It is possible to bring about a wide development in the field of building and construction, and they may finalize more than one function at the same time. The dispersion of nanoparticles (Nps) in concrete mixtures is a key strategy to achieve the tailoring process, which is used to design new materials with specific properties to perform desired functions or applications. In this paper, resistance against chemical corrosion is achieved. These nanocomposites (Ncps)can improve the microstructure, function, and strength. The SEM, physical, mechanical characterization, workability and electrochemical measurements of the concrete based on those Nps. The results discovered that those Nps are corrosion resistant, contributing to decreased failure corrosion problems, which may lead to continuing to work at the same level throughout the years of service. This communication aims to provide a deep comprehension of the role of (Ncps) admixtures in concrete composites. They provide possible methods to enhance their overall characteristics and establish the basis for a more sustainable and long-lasting future in the building field.

GSH responsive AuNRs@TFF nanotheranostic for NIR-II photoacoustic imaging-guided CDT/PTT synergistic cancer therapy

Gold nanorods (AuNRs) are important photothermal therapeutic agents; however, a single therapy does not achieve satisfactory outcomes, and the synthesis process often leads to the adsorption of cetyltrimethylammonium bromide on the surface of AuNRs, which reduces its biocompatibility. Natural polyphenols are abundant in natural plants and have good biocompatibility. The metal-polyphenol network is formed by the coordination of metal ions and polyphenols, which has good drug loading, surface adhesion, and biocompatibility. In this study, the metal-polyphenol network structure formed by a transition metal (iron) and natural polyphenol tannic acid was used to modify the surface of gold nanorods (AuNRs@TF). Additionally, the surfaces of AuNRs were modified using the targeted functional molecule mercapto folic acid (AuNRs@TFF). The constructed composite nanomaterials AuNRs@TFF has good biocompatibility and tumor targeting ability. Tannic acid‑iron degrades in the tumor microenvironment and releases iron ions that catalyze the Fenton reaction, thereby facilitating chemodynamic therapy. The good photo-thermal ability of AuNRs generate good photoacoustic signals to facilitate photoacoustic imaging mediation and enhances photothermal and chemodynamic therapy performance. This study expands on the application of AuNRs in the field of nanomedicine. The simple and effective design of AuNRs@TFF provides a strategy for the development of synergistic therapeutic agents for photothermal therapy and chemodynamic therapy.

Modulation of Free Carbon Structures in Polysiloxane-Derived Ceramics for Anode Materials in Lithium-Ion Batteries.

Polymer-derived silicon oxycarbide (SiOC) ceramics have garnered significant attention as novel silicon-based anode materials. However, the low conductivity of SiOC ceramics is a limiting factor, reducing both their rate capability and cycling stability. Therefore, controlling the free carbon content and its degree of graphitization within SiOC is crucial for determining battery performance. In this study, we regulated the free carbon content using divinylbenzene (DVB) and controlled the graphitization of free carbon with the transition metal iron (Fe). Through a simple pyrolysis process, we synthesized SiOC ceramic materials (CF) and investigated the impact of Fe-induced changes in the carbon phase and the amorphous SiOC phase on the comprehensive electrochemical performance. The results demonstrated that increasing the DVB content in the SiOC precursor enhanced the free carbon content, while the addition of Fe promoted the graphitization of free carbon and induced the formation of carbon nanotubes (CNTs). The electrochemical performance results showed that the CF electrode material exhibited a high reversible capacity of approximately 1154.05 mAh g-1 at a low current density of 100 mA g-1 and maintained good rate capability and cycling stability after 1000 cycles at a high current density of 2000 mA g-1.

Nanoarchitectonics of MIL-101(Fe)/g-C3N4 S-Scheme heterojunction for photocatalytic nitrogen fixation: Mechanisms and performance

Recently, there has been a growing interest in the fundamental understanding of the mechanism of how MIL-101(Fe)/g-C3N4 heterojunctions facilitate the occurrence of photocatalytic nitrogen fixation reactions, especially the electron transfer mechanism has attained increasing attention in photocatalysis. Herein, we implemented a "triple win scenario" strategy to fabricate the S-scheme MIL-101(Fe)/g-C3N4 heterojunction through a straightforward solvothermal process. The MC-6 heterojunction minimizes the recombination of photogenerated carriers, enhances light utilization efficiency, and activates the N≡N bond, thus boosting photocatalytic nitrogen fixation efficiency. The transition metal iron activates the N≡N bond, while S-scheme heterojunctions reduce the photogenerated carrier recombination. In addition, the decrease in band gap (Eg) leads to an increase in visible light utilization efficiency. ISIXPS proved the mechanism of interelectron transfer of MIL-101(Fe)/g-C3N4 heterojunction under illumination. Upon the creation of the heterojunction, electrons migrate from g-C3N4 to MIL-101(Fe), establishing an inherent electric field due to the disparate Fermi levels between the two materials. The electrons (e-) on the g-C3N4 CB with a more negative reduction potential and the holes (h+) on the MIL-101(Fe) VB are retained, which increased the redox capacity to a great extent required for the reduction of N2 to NH3. The ammonia production efficiency of MC-6 photocatalyst was 160 µmol gcat-1 h-1, representing an 8-fold and 2.8-fold improvement over pristine g-C3N4 (20 µmol gcat-1 h-1) and MIL-101(Fe) (57 µmol gcat-1 h-1), respectively.

Pyrolysis characteristics and hydrogen production mechanism of biomass impregnated with transition metals

The application of metal impregnation pretreatment to improve the quality of biomass pyrolysis gas production is considered as a promising upgrading technology. Transition metals have been well developed for the unique structural characteristics. After impregnation pretreatment, the product distribution of biomass pyrolysis was changed, and the transfer path of H atoms and the formation mechanism of H2 can be revealed through analysis. The effects of impregnation pretreatment with three different transition metals (iron, cobalt, and nickel) on the pyrolysis characteristics of corn straw were evaluated in this work. Three transition metal solutions with concentrations of 0.5 M, 1 M, and 2 M were used to explore the influence of impregnation concentration on the yield and composition of the pyrolysis products. The results showed that iron promoted the formation of liquid products, whose proportion increased by 37.29% upon increasing the impregnation solution concentration. The addition of cobalt and nickel led to more pyrolysis gas generation. When the impregnation solution concentration was greater than 0.5 M, the gas production rate exceeded 45 wt%. Nickel simultaneously promoted the generation of H2 and CH4 in pyrolysis gas, whose yields were increased by 63% and 20% respectively compared with raw materials. Py-GC/MS analysis showed that Co-CS had strong decarboxylation characteristics during pyrolysis. Metal impregnation decreased the content of aromatic compounds in tar, which increased the stretching vibrations of C-H bonds in char. Ring-opening rearrangements of polycyclic aromatic hydrocarbons were promoted, which formed more -H. Nickel catalyzed the removal of CH3 and H groups and the rearrangement of C-O in volatile products, which formed more H2 and CH4. These findings provide an avenue to optimize the metal impregnation conditions to produce hydrogen via biomass pyrolysis.

Nanozyme Decorated Metal-Organic Framework Nanosheet for Enhanced Photodynamic Therapy Against Hypoxic Tumor.

Photodynamic therapy (PDT) has attracted increasing attention in the clinical treatment of epidermal and luminal tumors. However, the PDT efficacy in practice is severely impeded by tumor hypoxia and the adverse factors associated with hydrophobic photosensitizers (PSs), including low delivery capacity, poor photoactivity and limited ROS diffusion. In this study, Pt nanozymes decorated two-dimensional (2D) porphyrin metal-organic framework (MOF) nanosheets (PMOF@HA) were fabricated and investigated to conquer the obstacles of PDT against hypoxic tumors. PMOF@HA was synthesized by the coordination of transition metal iron (Zr4+) and PS (TCPP), in situ generation of Pt nanozyme and surface modification with hyaluronic acid (HA). The abilities of hypoxic relief and ROS generation were evaluated by detecting the changes of O2 and 1O2 concentration. The cellular uptake was investigated using flow cytometry and confocal laser scanning microscopy. The SMMC-7721 cells and the subcutaneous tumor-bearing mice were used to demonstrate the PDT efficacy of PMOF@HA in vitro and in vivo, respectively. Benefiting from the 2D structure and inherent properties of MOF materials, the prepared PMOF@HA could not only serve as nano-PS with high PS loading but also ensure the rational distance between PS molecules to avoid aggregation-induced quenching, enhance the photosensitive activity and promote the rapid diffusion of generated radical oxide species (ROS). Meanwhile, Pt nanozymes with catalase-like activity effectively catalyzed intratumoral overproduced H2O2 into O2 to alleviate tumor hypoxia. Additionally, PMOF@HA, with the help of externally coated HA, significantly improved the stability and increased the cell uptake by CD44 overexpressed tumor cells to strengthen O2 self-supply and PDT efficacy. This study provided a new strategy of integrating 2D porphyrin MOF nanosheets with nanozymes to conquer the obstacles of PDT against hypoxic tumors.

The Effect of Rubber-Metal Interactions on the Mechanical, Magneto-Mechanical, and Electrical Properties of Iron, Aluminum, and Hybrid Filler-Based Styrene-Butadiene Rubber Composites.

Multifunctional stretchable rubber composites are gaining attention due to their unique electrical, mechanical, and magnetic properties. However, their high production costs pose economic challenges. This study explores the use of cost-effective metal powders-iron, aluminum, and their 1:1 (vol/vol) hybrid filler-in styrene-butadiene rubber composites, varying from 10 to 20 vol%. The effects of these metal particles on the mechanical, electrical, morphological, and swelling properties were investigated. Metal particles generally act as non-reinforcing fillers but can significantly enhance the mechanical modulus, electrical, and magnetic properties based on the filler structure and the filler-rubber interactions. Iron-based composites exhibit significant electrical conductivity and excellent magnetic properties. Aluminum enhances the modulus, while the combination yields average mechanical properties with added magnetic characteristics. Iron demonstrates higher reactivity with sulfur-based crosslinking ingredients, adversely affecting the rubber matrix's crosslinks, as shown by swelling tests. This reactivity is attributed to iron's transition metal characteristics. At 20 vol%, iron-filled composites display the highest magnetic anisotropic effect on toughness (~25%) under a magnetic field by permanent magnets and excellent electrical conductivity (1.5 × 10-2 S/m). While iron significantly boosts the electrical and magnetic properties, higher filler amounts degrade the mechanical properties. These composites are currently suitable for electrical and smart mechanical applications, but incorporating reinforcing fillers could enhance their robustness for broader applications.

Graphitized carbon-anchored FeSe nanoparticles for stable and efficient bifunctional electrocatalyst in rechargeable zinc-air batteries

Developing zinc-air batteries still heavily relies on the design of stable, high-activity, and inexpensive oxygen-electric bifunctional catalysts. In this work, transition metal iron salts converted amorphous carbon into graphitized carbon at high temperatures, and nitrogen-doped graphitized carbon-anchored iron nanoparticles (Fe–N–C) are prepared. Then, Fe–N–C is pyrolyzed with selenium dioxide (SeO2) to convert iron (Fe) nanoparticles into iron selenide (FeSe) in situ to obtain nitrogen-doped graphitized carbon-anchored FeSe nanoparticle catalysts (FeSe/NC). The catalyst's carbon support has excellent electrical conductivity, which effectively promotes the transport rate of charges and enhances the catalytic activity of FeSe particles. FeSe/NC demonstrates outstanding catalytic activity for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). When utilizing FeSe/NC catalysts in rechargeable zinc-air batteries (ZABs-FeSe/NC), the most excellent power density could exceed 186.6 mW cm−2, and the specific capacity can achieve 905.2 mAh g−1, demonstrating excellent performance. Furthermore, the battery can achieve stable charge-discharge for longer than 200 h at a large current density of 10 mA cm−2, which has excellent practical application feasibility in the future.

Recent Advances in Targeting Transition Metals (Copper, Iron, and Zinc) in Alzheimer's Disease.

Changes in the transition metal homeostasis in the brain are closely linked with Alzheimer's disease (AD), including intraneuronal iron accumulation and extracellular copper and zinc pooling in the amyloid plague. The brain copper, zinc, and iron surplus are commonly acknowledged characteristics of AD, despite disagreements among some. This has led to the theory that oxidative stress resulting from abnormal homeostasis of these transition metals may be a causative explanation behind AD. In the nervous system, the interaction of metals with proteins appears to be an essential variable in the development or suppression of neurodegeneration. Chelation treatment may be an option for treating neurodegeneration induced by transition metal ion dyshomeostasis. Some clinicians even recommend using chelating agents as an adjunct therapy for AD. The current review also looks at the therapeutic strategies that have been attempted, primarily with metal-chelating drugs. Metal buildup in the nervous system, as reported in the AD, could be the result of compensatory mechanisms designed to improve metal availability for physiological functions.

Theoretical insight into electrochemical nitrate reduction on transition metal iron doped graphdiyne

AbstractProduction of ammonia (NH3) by electrocatalytic reduction of nitrate (NO3RR) not only eliminates harmful pollution, but also provides a way to reduce the energy consumption associated with predominated Haber‐Bosch process. However, realization of this process still faces many challenges because of the complexity of the reaction mechanism. Here we investigated the catalytic activity and selectivity of a series of graphdiyne supported single atom catalysts (SACs), namely TM/GDY, for the reduction of N to NH3 by first‐principles calculations. Among the 10 SACs studied, Fe/GDY was found to have good catalytic performance, consistent with the fact that the Fe‐doped GDY molecular layer was located near the top of the volcano plot, with a reaction limit potential of −0.44 V and showed excellent selectivity in inhibiting the competitive hydrogen evolution reaction (HER). The formation of the by‐products NO2, NO, N2O and N2 on Fe/GDY requires a considerable energy barrier, which ensures high selectivity. Furthermore, detailed electronic property analyses indicate that the GDY can work as an electron repository to effectively balance the charge transfers during the reaction process. This study not only offers an eligible NO3RR electrocatalyst but also provides an atomic understanding of the mechanisms of the NO3RR process behind.

Metal–organic framework–derived trimetallic particles encapsulated by ultrathin nitrogen-doped carbon nanosheets on a network of nitrogen-doped carbon nanotubes as bifunctional catalysts for rechargeable zinc–air batteries

Economical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) bifunctional catalysts with high activity aimed at replacing precious metal catalysts for rechargeable zinc-air batteries (ZABs) must be developed. In this study, a multiple hierarchical-structural material is developed using a facile dielectric barrier discharge (DBD) plasma surface treatment, solvothermal reaction, and high-temperature carbonization strategy. This strategy allows for the construction of nanosheets using nitrogen-doped carbon (NC) material-encapsulated ternary CoNiFe alloy nanoparticles (NPs) on a network of NC nanotubes (NCNTs), denoted as CoNiFe–NC@p–NCNTs. Precisely, the presence of abundant CoNiFe alloy NPs and the formation of M–N–C active sites created by transition metals (cobalt, nickel, and iron) coupled with NC can provide superior OER/ORR bifunctional properties. Moreover, the prepared NC layers with a multilevel pore structure contribute to a larger specific surface area, exposing numerous active sites and enhancing the uniformity of electron and mass movement. The CoNiFe0.08–NC@p–NCNTs show remarkable dual functionality for electrochemical oxygen reactions (ORR half-wave potential of 0.811 V, limiting current density of 5.73 mA cm−2 measured with a rotating disk electrode at a rotation speed of 1600 rpm, and OER overpotential of 351 mV at 10 mA cm−2), which demonstrates similar ORR performance to 20 wt% Pt/C and better OER performance than the commercial RuO2. A liquid ZAB prepared using the proposed material has excellent bifunctionality with an open-circuit voltage of 1.450 V and long-term cycling stability of 230 h@10 mA cm−2.

Femtosecond Infrared Spectroscopy Resolving the Multiplicity of High-Spin Crossover States in Transition Metal Iron Complexes.

Tuning the photophysical properties of iron-based transition-metal complexes is crucial for their employment as photosensitizers in solar energy conversion. For the optimization of these new complexes, a detailed understanding of the excited-state deactivation paths is necessary. Here, we report femtosecond transient mid-IR spectroscopy data on a recently developed octahedral ligand-field enhancing [Fe(dqp)2]2+ (C1) complex with dqp = 2,6-diquinolylpyridine and prototypical [Fe(bpy)3]2+ (C0). By combining mid-IR spectroscopy with quantum chemical DFT calculations, we propose a method for disentangling the 5Q1 and 3T1 multiplicities of the long-lived metal-centered (MC) states, applicable to a variety of metal-organic iron complexes. Our results for C0 align well with the established assignment toward the 5Q1, validating our approach. For C1, we find that deactivation of the initially excited metal-to-ligand charge-transfer state leads to a population of a long-lived MC 5Q1 state. Analysis of transient changes in the mid-IR shows an ultrafast sub 200 fs rearrangement of ligand geometry for both complexes, accompanying the MLCT → MC deactivation. This confirms that the flexibility in the ligand sphere supports the stabilization of high spin states and plays a crucial role in the MLCT lifetime of metal-organic iron complexes.

Coupling and electronic synergistic effects of Fe/CeO2 composite to achieve high efficiency and selectivity for RWGS reaction

Transition metal iron, because of its high oxygen mobility, excellent thermal stability and low price, is often used in the study of RWGS reaction. However, the bottleneck problem of iron-based catalysts is the poor CO2 conversion rate. Herein, the Fe/CeO2 composite catalyst with Fe-O-Ce was successfully constructed, which has both high CO2 conversion and high CO selectivity for the low-temperature RWGS reaction. Furthermore, the influence of Fe0 contents is studied, and the result indicated that the CO2 conversion rate and CO selectivity are up to 50.05% and 100% at 500 ºC by the use of 20Fe/CeO2. Moreover, CeO2 is the best catalyst holder than the others. The physical and chemical properties of the catalysts are investigated by in-situ XPS, XRD, low-temperature N2 absorption-desorption (BET) and CO2-TPD. Nano zero-valent iron (Fe0) is the main active center for the RWGS reaction, which easily releases the outer electrons to activate reactant molecules. The introduction of the CeO2 is conducive to the high dispersion of Fe0 nanoparticles and the formation of abundant active centers. With the increase of Fe loading, the electron-rich Fe0 induces a strong electronic effect on the electron-deficient CeO2. The regularity of catalyst are changed by a large amount of zero-valent iron entering into the CeO2 lattice, then formed a lot of Fe-O-Ce solid solution. A large amount of zero-valent iron enter into the CeO2 lattice, inhibiting the grain growth and aggregation of monometallic species, and promoting nano Fe species highly dispersed on CeO2 carriers, leading more active centers exposure. Meanwhile, the abundant oxygen vacancy on xFe/CeO2 surface is advantage for the adsorption and activation of H2 and CO2 molecules. Therefore, the coupling and electronic synergistic effects of the active component Fe0 and the carrier CeO2 make xFe/CeO2 becoming a promising candidate catalyst for RWGS reaction.

Chemometric and ICP-OES analyses of Forsythia europaea Degen & Bald. and its extracts

Forsythia represents a group of plants originating mainly from China and Japan, but one species is endemic and grows in the Balkans (Balkan forsythia, Forsythia europaea Degen & Bald.). Our previous studies on polyphenols in investigated extracts of Balkan forsythia showed that this plant is a good source of polyphenols. Analysis of the various extracts of Balkan forsythia (Forsythia europaea Degen & Bald.) by the application of ICP-OES method showed that they are rich in different macro and microelements. The abundance order of macroelements is K>Ca>P>Mg>Na in all extracts. Among the transition metals iron, manganese, zinc and copper are particularly important, and the order of abundance is Zn>Fe>Cu>Mn. Heavy metals which are the most frequent contaminants of food are lead, cadmium and arsenic, and the determination of their contents is of special importance on the safe use of plant species. The determination shows that aqueous extracts contain the highest quantity of elements, which is especially important. The contents of toxic elements are significantly lower than the permitted values. Statistical methods (Principal Component Analysis (PCA) and Agglomerative Hierarchical Clustering (AHC)) are useful tools for the grouping of samples and determining relations between investigated elements. This analysis shows that when higher quantities of Cr and Ba are present, the lower quantities of V are present, and vice versa. Based on our studies on polyphenols and minerals, we can expect the anti-inflammatory effects of extracts of Balkan forsythia.

State of the Art Technologies for High Yield Heterologous Expression and Production of Oxidoreductase Enzymes: Glucose Oxidase, Cellobiose Dehydrogenase, Horseradish Peroxidase, and Laccases in Yeasts P. pastoris and S. cerevisiae

Oxidoreductase (OXR) enzymes are in high demand for biocatalytic applications in the food industry and cosmetics (glucose oxidase (GOx) and cellobiose dehydrogenase (CDH)), bioremediations (horseradish peroxidase (HRP) and laccase (LAC)), and medicine for biosensors and miniature biofuel cells (GOx, CDH, LAC, and HRP). They can be used in a soluble form and/or within the yeast cell walls expressed as chimeras on the surface of yeast cells (YSD), such as P. pastoris and S. cerevisiae. However, most of the current studies suffer from either low yield for soluble enzyme expression or low enzyme activity when expressed as chimeric proteins using YSD. This is always the case in studies dealing with the heterologous expression of oxidoreductase enzymes, since there is a requirement not only for multiple OXR gene integrations into the yeast genome (super transformations), and codon optimization, but also very careful design of fermentation media composition and fermentation conditions during expression due to the need for transition metals (copper and iron) and metabolic precursors of FAD and heme. Therefore, scientists are still trying to find the optimal formula using the above-mentioned approaches; most recently, researcher started using protein engineering and directed evolution to increase in the yield of recombinant enzyme production. In this review article, we will cover all the current state-of-the-art technologies and most recent advances in the field that yielded a high expression level for some of these enzymes in specially designed expression/fermentation systems. We will also tackle and discuss new possibilities for further increases in fermentation yield using cutting-edge technologies such as directed evolution, protein and strain engineering, high-throughput screening methods based on in vitro compartmentalization, flow cytometry, and microfluidics.

Advancement in the C–H bond alkylation of (hetero)arenes catalyzed by the most abundant transition metal–iron

Advancement in the direct C–H bond alkylation of arenes and heteroarenes using the catalysts based on the most abundant transition metal, iron, is summarized.