Transfixation Pin Cast Research Articles

Nonpathological phalangeal fractures in cattle: 17 cases (2004-2020).

To characterize clinical findings and outcomes for cattle with nonpathological phalangeal fractures. 17 cattle with nonpathological phalangeal fractures. Medical records of a teaching hospital were reviewed to identify cattle treated for nonpathological phalangeal fracture between May 2004 and May 2020. Information extracted from the records of study-eligible animals included signalment, history, clinical and diagnostic imaging findings, treatment, and survival to hospital discharge. Long-term outcome was assessed by telephone communication with owners. 9 bulls and 8 heifers or cows (age range, 1 to 7 years) of various breeds and uses were evaluated. Five of the 9 bulls were bucking stock, which were overrepresented in the study population. Seven animals had 8 distal phalanx fractures; 10 animals had 11 proximal phalanx fractures. Eight animals were treated by application of a hoof block on the unaffected adjacent digit, 7 animals were treated with a distal limb (n = 6) or transfixation pin (1) cast in addition to a hoof block, 1 animal was treated with a hoof trim to elevate and alleviate weight bearing on the affected digit, and 1 animal was euthanized immediately after diagnosis. Sixteen animals survived to hospital discharge. Follow-up was obtained for 12 animals, of which 9 returned to functionable use and 3 were culled. Results suggested cattle with a nonpathological phalangeal fracture have a favorable prognosis for return to function following application of a hoof block to the unaffected adjacent digit with or without a distal limb cast.

The Effect of Reducing the Bone to Cast Distance in an Equine Transfixation Pin Cast: An Ex Vivo Biomechanical Study.

The aim of this study was to evaluate the effect of reducing the bone to cast distance on the resistance of the pin to cyclic loading in equine transfixation pin casts. Eleven pairs of cadaveric equine third metacarpal bones were prepared and one 6.3/8.0 mm transfixation pin was placed in standard fashion 10 mm proximal to the distal physeal scar into each bone. One metacarpus of each pair was tested with a distance of 10 mm (10 mm group) and the contralateral metacarpus with a distance of 20 mm (20 mm group) between the outer cortex of the bone and the fixation of the pin. Eight pairs were tested using a simplified test set-up in which the pins were fastened at both ends to polyoxymethylene-copolymer sleeves. The pins of the remaining three pairs of bones were incorporated into a fibreglass cast. All specimens were tested under cyclic loading until failure of the pin in axial compression. All pins failed uni- or bilaterally at clinically relevant load levels. Pins of the 10 mm group endured significantly (p < 0.05) higher load levels and total number of cycles until failure compared with the pins of the 20 mm group. The distance between the bone surface and the cast at the location of pin insertion has a significant effect on resistance of the pins to cyclic loading. Therefore, the amount of padding applied underneath an equine transfixation pin cast can have an influence on the overall stability and durability of the construct.

Surgical treatment of a complicated distal tibia epiphyseal Salter–Harris type I fracture in a yearling

SummaryThis article describes the management of a complicated distal epiphyseal Salter–Harris type I fracture of the left tibia in a yearling horse. Closed reduction and internal fixation was attempted in the first surgery using tension band wires. Due to fracture instability 2 weeks after surgery, a full‐limb transfixation pin cast was applied to the tibia and maintained for 7 weeks to prevent further fracture displacement and to achieve axial alignment. The full‐limb cast was maintained for a total of 12 weeks, including the time with the transfixation pin cast. Cast sores and tendon laxity resolved without further complications. Ten months after the first surgery, the fracture had radiographically healed, and the horse was sound at the walk and trot in a straight line.

Closing wedge ostectomy with transfixation pin-cast stabilization for correction of angular limb deformities of the metatarsophalangeal region in four cattle.

4 calves were evaluated because of lameness and an angular limb deformity of the metatarsophalangeal region. 3 calves (ages, 5 days, 10 days, and 1 month) had a congenital varus deformity of the metatarsophalangeal region characterized by medial subluxation of the first phalanx of digits 3 and 4 at the metatarsophalangeal joints. A 6-month-old heifer had a valgus deformity of the metatarsophalangeal region secondary to a malunion of a Salter-Harris type II fracture. The degree of deformity angulation ranged from 16° to 54° for the 4 patients. A closing wedge ostectomy with transfixation pin-cast application was performed on the affected limb of all 4 patients. The ostectomy healed with only minor complications (disuse osteopenia distal to the transfixation pins [n = 4] and cast sores [1]) that were easily resolved with no long-term adverse effects. Duration of follow-up for the 4 patients ranged from 6 to 17 months, and the owners reported satisfactory ambulation with no (n = 2) or only mild (2) residual lameness in the affected limb. Results suggested that a closing wedge ostectomy with transfixation pin-cast stabilization is an alternative for management of angular limb deformities of the metatarsophalangeal region in cattle. Such treatment improved the quality of life for all 4 patients. However, 2 of the 4 patients had congenital deformities confirmed to be heritable. There are ethical concerns associated with treating animals with heritable disorders, and exhibition and breeding of such animals should be avoided.

Clinical findings, treatment, and outcome in 11 dairy heifers with breakdown injury due to interosseous medius muscle rupture.

To describe the diagnosis, treatment, and prognosis of fetlock breakdown due to interosseus medius muscle rupture in cattle. Retrospective clinical study. Dairy heifers with unilateral or bilateral interosseus medius muscle rupture (n = 11). Breakdown injury due to rupture of the interosseus medius muscle was documented clinically, radiographically, and ultrasonographically. Breakdown was bilateral in 4 heifers (3 in forelimbs, 1 in hind limbs) and unilateral in 7 (all hind limbs). One heifer with severe bilateral hind limb breakdown was slaughtered and the remaining 10 were treated by transfixation pin cast (1 heifer), box rest (n = 2), and/or a cast and splint (7). Hyperextension of the fetlock and hyperflexion of the proximal interphalangeal joints during weight bearing were characteristic for interosseus muscle breakdown. Ultrasonographically, the origin and body of the interosseus muscle and the branches to the sesamoid bones were primarily affected by the rupture. Conservative treatment was successful (used for their intended purpose) in 8 of 9 heifers with a median lifespan of 32 months after discharge from the clinic (range 6-83). Rupture of the interosseus medius muscle in young cattle may be more common than previously suggested in the literature. Imaging with ultrasound allowed more detailed localization of lesions of the musculo-tendinous structure. Interosseus medius muscle rupture had a favorable prognosis when treated conservatively in these heifers.

Use of a modified transfixation pin cast for treatment of comminuted phalangeal fractures in horses

To (1) report a modified transfixation pin cast technique, using dorsal recumbency for fracture reduction, distal positioning of the pins in the epiphysis and distal metaphysis, and a hybrid cast, combining plaster of Paris (POP) and fiberglass casting, and (2) report outcome in 11 adult horses. Case series. Adult horses (n = 11) with comminuted phalangeal fractures. Horses were anesthetized and positioned in dorsal recumbency. The phalangeal fracture was reduced by limb traction using a cable attached to the hoof. Screw fixation in lag fashion of fracture fragments was performed when possible. Transfixation casting was performed using two 6.3 mm positive profile centrally threaded pins with the 1st pin placed in the epiphysis of the metacarpus/tarsus at the center of, or slightly proximal to, the condylar fossa and the 2nd one 3-4 cm proximal. A hybrid cast was applied. Forelimbs were involved in 9 horses and the hind limb in 2. Pins were maintained for a minimum of 6 weeks. No pin loosening was observed at the time of removal (6-8 weeks). A pony fractured the distal aspect of the metacarpus at the proximal pin. Nine horses survived (82%); none of the horses developed septic arthritis despite the distal location of the distal pin, close to the fetlock joint. This modified transfixation pin casting technique was associated with good pin longevity and could reduce the risk of secondary pin hole fractures and pin loosening.

Surgical treatment of distal tarsal joint luxations in three horses

The clinical signs, radiographic findings, surgical treatment, and outcome of three horses with luxation of the distal tarsal joints are reported. Two patients showed luxations of the tarsometatarsal joint whereas luxation of the proximal intertarsal joint was found in one case. Open reduction, followed by internal fixation was performed in two horses and closed reduction with a transfixation pin cast was performed in the third. The treatment in all three cases resulted in a satisfactory clinical outcome.

Comparative Biomechanical Evaluation of a Pin‐Sleeve Transfixation System in Cadaveric Calf Metacarpal Bones

To compare proximal fragment displacement and the peri-implant strain using a pin-sleeve cast (PSC) system and a transfixation pin cast (TPC) system on a cadaveric calf metacarpal bone fracture model. Experimental. Cadaveric calf metacarpal bones (n= 6 pairs). Paired samples were instrumented with either the TPC or the PSC systems. Strain gauges were applied proximal to the transfixation implants and the bones encased in cast material. The distal part of the construct was removed to mimic an unstable distal comminuted fracture. Constructs were fixed to the material testing machine and initially loaded in axial compression in their elastic range to determine construct stiffness. Constructs were loaded cyclically with a sinusoidal curve that increased until failure. Variables compared statistically between constructs were the initial construct stiffness and, at given load points, the mean metacarpal axial displacement in loading and unloading condition and mean axial strain. Initial construct mean± SD axial stiffness was not significantly different between constructs (PSC: 689± 258; TPC: 879± 306 N/mm). There was no significant difference between either investigated displacements of metacarpal bones transfixed with PSC and those transfixed with TPC at all load points. The PSC constructs had a significant decrease in the recorded mean strain (502± 340 μstrain) compared to the TPC construct (1738± 2218 μstrain). The PSC significantly reduced peri-implant strain with comparable axial displacement to the TPC in cadaveric calf metacarpal bones.

Incidence of support limb laminitis in horses treated with half limb, full limb or transfixation pin casts: A retrospective study of 113 horses (2000–2009)

To determine the incidence of support limb laminitis among horses treated with half limb, full limb or transfixation pin casts and determine potential risk factors. Medical records of 113 horses treated with half limb, full limb or transfixation pin casts at an equine referral hospital from 2000 to 2009 were reviewed. Associations between potential risk factors and development of support limb laminitis were evaluated by bivariable and multivariable logistic regression analyses. Of the 113 horses that received casts, 14 (12%) developed confirmed support limb laminitis. The bodyweight of the horse and duration of casting in weeks were significantly associated with support limb laminitis. Horses requiring full limb casts or transfixation pin casts were more likely to develop this complication than horses requiring half limb casts. There were no significant associations between developing support limb laminitis and weightbearing capacity on presentation to the hospital, the limb affected (fore- or hind), whether there was a fracture present or breed of horse. Support limb laminitis is a relatively common complication among horses treated with half limb, full limb and transfixation pin casts. Greater durations of casting and higher bodyweights increase the likelihood of developing this complication. Support limb laminitis may occur secondary to any painful unilateral lameness and is not necessarily more likely to develop in horses with severe orthopaedic conditions such as fractures. However, heavier horses, those requiring casts for longer periods of time and those that require a full limb or transfixation pin cast as opposed to a half limb cast should be considered to have an increased risk for developing support limb laminitis post operatively.

Finite element analysis of a novel pin-sleeve system for external fixation of distal limb fractures in horses

The transfixation pin cast (TPC) is an external skeletal fixation technique used to treat horses with distal limb fractures, but its use is often associated with pin-loosening and an increased risk of treatment failure. To address implant loosening, the pin sleeve cast system (PSC) was recently designed and consists of a pin-sleeve unit inserted into the bone. Each pin runs through a sleeve placed in the bone, making contact at two fixed points only within the sleeve. Each pin is attached to a ring embedded in a resin cast. In this report, the mechanical performance of a traditional TPC pin arrangement was compared with that of the PSC using validated finite element models of bone substitutes previously tested in vitro. The PSC resulted in a marked reduction in peak strain magnitude around the pins and a more even distribution of strain across the bone cortex. The two systems resulted in comparable proximal fragment displacement and had a similar stress concentration around bone defects during implant removal. The findings suggest that the PSC load transfer mechanism is effective even in geometrically complex structures like equine bones.

Comparison of Fixation Methods for Treatment of Long Bone Fractures in Llamas and Alpacas

To determine outcome after repair of long bone fractures in llamas and alpacas. Case series. Llamas (n=11) and alpacas (8). Medical records (1998-2008) of camelids with long bone fractures were reviewed for history, repair method, and complications. Outcome was also assessed by owner telephone questionnaire. Mean age at repair was 39 months. There were 8 males and 11 females. Fracture distribution was tibia (n=6), metatarsus (5), metacarpus (4), radius and ulna (2), humerus (1), and femur (1), with 13 closed and 6 open fractures. Fracture repair was by internal fixation (n=11), external fixation with a transfixation pin cast (5), external coaptation (2), and cross-pinning (1). In 1 llama, the limb was amputated to revise a failed external fixation repair. Seventeen animals (89%) were discharged, and 2 were euthanatized. Outcome was available for 13 animals: 9 were used for breeding and 4 as pets. Fewer major complications occurred with internal fixation than with external fixation with a transfixation pin cast (P<.005); however, there were no significant differences in minor complications between groups. Internal fixation with bone plates was associated with fewer major complications than external fixation with a transfixation pin cast.

In Vitro Mechanical Evaluation of a Novel Pin-Sleeve System for External Fixation of Distal Limb Fractures in Horses: A Proof of Concept Study

To evaluate the efficacy of a novel pin-sleeve cast (PSC) system for external fixation of distal limb fractures in horses and to compare it with the transfixation pin cast (TPC) system. Experimental. One bone substitute each was used for the TPC and PSC systems. The PSC was tested in 4 configurations characterized by different pin preloads. Specimens were loaded in axial compression in the elastic range. Variables compared statistically were: bone substitute axial displacement and axial strain measured above implants with strain gauges. Pin preload was correlated with the variables investigated. Load to failure and a fatigue tests supplemented the investigation. The PSC configuration with the highest pin preload showed a significantly lower axial displacement compared with the TPC. No significant differences were observed between all other PSC configurations and the TPC. All PSC systems had a significant decrease in recorded strain compared with the TPC system. Pin axial preload inversely correlated with axial displacement but had no effect on axial strain. In the failure test, the PSC encountered plastic deformation earlier than the TPC. In the fatigue test, the PSC ran >200,000 cycles. Preliminary in vitro tests showed that the PSC system significantly reduced peri-implant strain while concurrently having comparable axial displacement to the TPC system. The PSC system has the potential to reduce the risk of pin loosening in horses.

In Vitro Comparison of a Novel External Fixator and Traditional Full-Limb Transfixation Pin Cast in Horses

To compare the mechanical properties and failure modes of a standardized short oblique distal radial metaphyseal osteotomy stabilized using either a transfixation pin cast (TPC), a modular-sidebar external skeletal fixator (ESF), or a solid-sidebar ESF (modular- or solid-ESF, respectively) using static or cyclic axial loading to failure. In vitro study. Equine cadaver forelimbs. A 30 degrees oblique distal radial osteotomy was created and stabilized using 1 of the 3 fixation methods: (1) TPC, (2) modular-ESF, or (3) solid-ESF. Limbs were tested using static (TPC, modular-ESF, and solid-ESF) or cyclic (TPC and solid-ESF) axial loading to failure. The stiffness, yield load, yield displacement, failure load, and failure displacement for static loading and the cycles to failure for cyclic loading at 75% failure load were obtained. Data were analyzed using a Kruskal-Wallis test. Level of significance was P<.05. The solid-ESF had a greater stiffness, higher yield and failure load and a lower yield and failure displacement than the TPC (P=.01) and the modular-ESF (P=.02). TPC had a higher yield load, failure load, and yield displacement than the modular-ESF (P=.01). Mean cycles to failure for TPC was 2996+/-657 at a load of 16,000 N and for solid-ESF 6560+/-90 cycles at a load of 25,000 N. The solid-ESF was stiffer and stronger than the TPC and modular-ESF and failed at a greater number of cycles in axial loading compared with the TPC. This study is an initial step in evaluating the solid-ESF. Further testing needs to be performed, but this fixation may offer a viable alternative to the traditional TPC for stabilization of long bone fractures in adult horses.

Use of transfixation pin casts to treat adult horses with comminuted phalangeal fractures: 20 cases (1993–2003)

To determine the clinical applications, short and long-term survival, and complications of using transfixation pin casts for treatment of comminuted phalangeal fractures in adult horses. Retrospective case series. 20 horses. Medical records were reviewed to obtain information regarding signalment, fracture location, treatment methods, complications, and short-term survival (discharge from hospital). Long-term follow-up information was obtained via contact with owners or trainers. 12 fractures were in a hind limb, and 8 were in a forelimb. Fourteen fractures occurred in a middle phalanx, and 6 occurred in a proximal phalanx. Eleven fractures were treated with internal fixation combined with transfixation pin casts, and 9 fractures were treated with transfixation pin casts alone. Transfixation pin casts were maintained for a mean of 52 days (median, 49 days; range, 1 to 131 days). Fourteen (70%) horses were discharged from the hospital, whereas 6 (30%) were euthanized during the treatment period. Reasons for euthanasia included secondary fracture of the third metacarpal or metatarsal bone, avascularity of the distal aspect of the limb associated with an open fracture, and displacement of the fracture after transfixation pin cast removal. A significantly greater number of horses was discharged from the hospital when the transfixation pin cast was maintained for > 40 days, compared with those in which the transfixation pin cast was maintained for < 40 days. Results suggested that horses should be maintained in a transfixation pin cast for a minimum of 40 days, as this was associated with an increase in short-term survival without an increased risk of catastrophic failure.

Ex vivo comparison of a novel tapered-sleeve and traditional full-limb transfixation pin cast for distal radial fracture stabilization in the horse

Distal radial fractures in adult horses are examples of long-bone fractures that are not always amenable to internal fixation. These fractures are often open, contaminated, severely comminuted, and located adjacent to the antebrachiocarpal joint. There have been few studies to improve upon the methods of stabilization of this type of fracture. External coaptation incorporating transfixation pins is one method that has been used to stabilize distal radial fractures in horses (1-3). The purpose of this preliminary study was to compare the load to failure in simulated weight-bearing of a novel tapered-sleeve transfixation pin cast (TSTPC) (4) with the traditional transfixation pin cast (TPC) in an ex vivo distal radial fracture model. Ten adult equine cadaveric forelimbs were randomly placed into a TPC group (n = 5) or a TSTPC group (n = 5). An oblique distal radial osteotomy was created prior to application of fibreglass cast material. The limbs were loaded in a single cycle to failure in simulated weight-bearing using an axial load. The mean load to failure for the TSTPC group (35,814 N) was significantly greater than in the TPC group (22,344 N) (p = 0.003). Tapered sleeves in conjunction with TPC warrant further investigation because they may prolong the life of the fixation, prevent or diminish fractures through the pin sites, and increase the load capacity of external coaptation used to stabilize equine fractures.

Effect of three types of half-limb casts on in vitro bone strain recorded from the third metacarpal bone and proximal phalanx in equine cadaver limbs

Abstract Objective To determine effect of 3 half-limb casts on bone strains recorded from the proximal phalanx (P-1) and third metacarpal bone (MCIII) of equine cadaver limbs, using a mechanical testing machine. Animals 12 equine cadaver limbs and 4 live horses. Procedure Bone strains were recorded at middorsal P-1 and the dorsal cortical aspect of the distal third of MCIII while limbs were variably loaded with 100 to 1,000 lb of force. To determine ability of the cast to protect the distal portion of the limb from weight-bearing loads, strains were recorded with the limb in 1 of the 3 casts and with it unsupported. To determine cast-induced discomfort, weight-supporting and transfixation pin casts were evaluated on 2 live horses Results All 3 casts significantly reduced bone strain at P-1. Significant differences were observed: mean 61 % reduction for the standard half-limb cast, 84% for the transfixation pin cast, and 97% for the weight-supporting cast at weight-bearing force of 500 lb. Only the weight-supporting cast significantly reduced strains recorded from MCIII. The weight-supporting cast was not well tolerated by 2 live horses. Conclusions The 3 casts significantly reduced transfer of weight-bearing forces to the distal portion of the limb. The weight-supporting cast effectively reduced strain on the P-1 to near 0, but was well tolerated by live horses. The transfixation pin cast reduced strain on the P-1 by &gt; 80% at weight-bearing loads of 500 lb, and live horses were comfortable. Standard half-limb casts significantly reduced strains on the P- 1, but to a lesser degree than did other casts. (Am J Vet Res 1998;59:1188-1193)

Effect of different full-limb casts on in vitro bone strain in the distal portion of the equine forelimb

SUMMARY Objective To determine the ability of a full-limb transfixation pin cast to protect the distal portion of the equine forelimb from weight-bearing forces by measuring bone strain in vitro on cadaver limbs loaded in a mechanical testing machine. Sample Population 6 forelimbs from 6 horses. Procedure Each limb was instrumented with 3 unidirectional metal foil electrical resistant strain gauges. Gauges were placed on the dorsal aspect of the distal portion of the radius and the mid-dorsal portion of the cortex of the third metacarpal bone and the first phalanx. Each limb was tested 3 times, once supported with a transfixation pin cast, once supported by a standard full-limb cast, and finally, uncast. The limbs were tested in a mechanical testing machine under axial loads ranging from 100 to 1,000 lb, and bone strains were recorded at each load. Results Compared with values for the uncast limb, the transfixation pin cast and the standard full-limb cast significantly (P &lt; 0.001) reduced bone strain on the distal portion of the radius, third metacarpal bone, and first phalanx. Compared with the standard full-limb cast, the transfixation pin cast significantly (P &lt; 0.001) reduced bone strain on the first phalanx. Conclusion and Clinical Relevance Compared with the standard full limb cast, the full-limb transfixation pin cast is more protective of the first phalanx. (Am J Vet Res 1998;59:197–200)

Effect of pin hole size and number on in vitro bone strength in the equine radius loaded in torsion

SUMMARY Objective To determine the effect of pin hole size and number on the breaking strength of the adult equine radius when loaded in torsion to failure. Sample Population 54 pairs of equine radii from adult horses. Procedure For test one, 12 pairs of radii were used to determine the effect of pin hole size on torsional breaking strength. A 6.35-mm hole was drilled in 1 radius, and a 9.5-mm hole was drilled in the contralateral radius. For test two, 36 pairs of radii were randomly assigned to 1 of 3 treatment groups (n = 12) to determine the effect of pin hole number on the torsional breaking strength of the equine radius. One radius of each pair served as a control, and one, three, or six 6.35-mm transcortical holes were drilled in the contralateral radius. For test three, 6 pairs of radii had torsional forces applied directly to the transfixation pins, as opposed to the bone itself. One radius of a pair served as a control, and three 6.35-mm smooth Steinman pins were placed in the contralateral radius. All radii were loaded in torsion to failure, and the breaking strengths were recorded. Results Compared with the 6.35-mm hole, the 9.5-mm hole significantly decreased torsional strength of the radius. There was no significant difference in mean torsional strength between the control radii and the radii with 1, 3, or 6 transcortical holes or when the transfixation pins were loaded. Conclusion Use of up to three 6.35-mm transfixation pins can be used in a full-limb transfixation pin cast to optimize stiffness without a significant decrease (12%) in bone strength. (Am J Vet Res 1998; 59:201–204)