Cis And Trans Research Articles

Investigation of isomerization and oxidation of astaxanthin in ready-to-eat Litopenaeus vannamei during accelerated storage

Astaxanthin (AST), the natural pigment in Litopenaeus vannamei, is susceptible to oxidation and isomerization, leading to the fading of the orange-red color in ready-to-eat (RTE) shrimps. This study specifically investigated the changes mechanism in AST content, including geometric and stereoisomers, as well as oxidation degradation, throughout the storage process of RTE shrimps. The results showed that the total amount of AST decreased by 46.76 % after 45 days of storage at 40 °C. The levels of geometric isomers (all-E, 9-Z, 13-Z) and stereoisomers (3S,3′S, 3S,3′R, 3R,3′R) gradually decreased over time. Notably, 9-Z and 3S,3′S isomers, known for their strong antioxidant activity, were reduced by 83.57 % and 61.64 % respectively. Additionally, AST underwent oxidative degradation, forming short-chain compounds (astaxanthinal or astaxanthinone), with the main products being Apo-14′-astaxanthinal and Apo-7-astaxanthinone DHA ester. These findings provide a theoretical foundation for further research on the degradation mechanism of AST, and offer valuable insights into the color protection of RTE shrimps.

Unraveling the Mechanical Response of Short-Chain Branched Amorphous Polyethylene: Insights from Molecular Dynamics Simulations

The deformation behavior of short-chain branched, amorphous polyethylene (PE) was investigated using united atom molecular dynamics (MD) simulations under uniaxial stretching. Our research reported in this paper examined the internal mechanisms underlying the mechanical response of the PE by analyzing potential energies, dihedral angle distributions, chain orientation and entanglements. The findings indicated that the short-chain branching generally enhanced Young’s modulus, except for sample B60 with a critical ethyl branch content of 60/1000 (60 ethyl branches per 1000 backbone carbons). The Young’s modulus of B60 was the local minimum value in the various samples. Analysis of the evolution of dihedral angles shows that the short-chain branching hinders the transition from gauche to trans configurations, leading to a decrease in the trans population as the branch content increases. Regarding the sample B60 with critical branch content 60/1000, the orientation parameter and entanglement parameter of the molecular chains along the backbone were lowest in the initial structure, and the efficiency of chain disentanglement was at its lowest during deformation. The simulation results elucidated the deformation mechanism related to the conformational evolution of the molecular chains, which can provide atomic-scale insights into the mechanical properties and processability of branched polyethylene, thereby allowing for optimization in its design and application.

Bridge vs Terminal Cyano-coordination in Binuclear Cobalt Porphyrin Dimers: Interplay of Electrons between Metal and Ligand and Spin-Coupling via Bridge.

Three cyano-coordinated cobalt porphyrin dimers were synthesized and thoroughly characterized. The X-ray structure of the complexes reveals that cyanide binds in a terminal fashion in both the anti and trans isomers of ethane- and ethylene-bridged cobalt porphyrin dimers, while in the cis ethylene-bridged dimer, cyanides bind in both terminal and bridging modes. The nonconjugated ethane-bridged complex stabilizes exclusively a diamagnetic metal-centered oxidation of type CoIII(por)(CN)2 both in the solid and in solution. In contrast, the complexes with the conjugated ethylene-bridge contain signatures of both paramagnetic ligand-centered oxidation of the type CoII(por•+)(CN)2 and diamagnetic metal-centered oxidation of type CoIII(por)(CN)2 with the metal-centered oxidized species being the major component in the solid state as observed in XPS, while the ligand-centered oxidized species are present in a significant amount in solution. 1H NMR spectrum in solution displays two set of signals corresponding to the simultaneous presence of both the diamagnetic and paramagnetic species. EPR and magnetic investigation reveal that there is a moderate ferromagnetic coupling between the unpaired electrons of the low-spin CoII center and the porphyrin π-cation radical in CoII(por•+)(CN)2 species as well as an antiferromagnetic coupling between the two CoII(por•+) units through the ethylene and CN bridges.

Reaction under Ball-Milling: Solvent- and Metal-Free One-Pot Diastereoselective Synthesis of Tetrahydroquinoline Derivatives as Potential Antibacterial and Anticancer Agents

AbstractA mild and efficient one-pot, three-component ball-mill-assisted reaction of aldehydes, anilines, and dihydrofuran (or dihydropyran and cyclohexenone) has been described for the first time in the presence of the catalytic amount of aqueous perchloric acid (8 mol%) at room temperature under organic solvent- and metal-free conditions. The reactions are fast (1 h), providing the products with excellent yields and high diastereoselectivity. This procedure endows a simple, efficient, and cost-effective method for the diastereoselective synthesis of furano- and pyrano-tetrahydroquinolines and phenanthridinone derivatives, which are important biological compounds. The diastereomers with cis configuration were isolated as major products. The H–H COSY, NOESY experiments and X-ray crystallographic analysis of selected compounds were performed to confirm the cis isomer. The synthesized tetrahydroquinolines have been evaluated in vitro for their antibacterial and anticancer activities, and it was found that both the prepared compounds showed significant antibacterial and anticancer properties.

Metabolic profiling and pharmacokinetic studies of alkamides, a pair of cis-trans isomers N-isobutyl-2E,4E,8Z,10E/Z-dodecatetraenamide, from Asari Radix et Rhizoma by UHPLC-Q/TOF-MS and UHPLC-MS/MS

Cis-trans isomers of N-isobutyl-2E,4E,8Z,10E-dodecatetraenamide (DDA-E) and N-isobutyl-2E,4E,8Z,10Z-dodecatetraenamide (DDA-Z) are representative alkamides with numbness of tongue, anti-inflammatory and analgesic activities of Asari Radix et Rhizoma. However, their respective metabolic pathways and pharmacokinetic behaviors are still unknown. This study aim to investigate the metabolism of the two alkamides in vitro and in vivo using ultra-high-performance liquid chromatography-quadruple-time-of-flight mass spectrometry. Furthermore, a rapid, sensitive, and selective ultra-high-performance liquid chromatography-tandem mass spectrometry method was developed to quantify DDA-E/Z in rat plasma. Results indicated that DDA-E and DDA-Z showed significant differences in metabolism and pharmacokinetics. Across all samples, 24 metabolites of DDA-E and 21 metabolites of DDA-Z were detected. A variety of pathways were involved in the production of these metabolites, mainly hydroxylation and oxidation. The linear range of DDA-E/Z was 1–2500 ng/mL (R2 = 0.9984), and the lowest quantification limit was 1 ng/mL. Precision, accuracy, extraction recovery, matrix effect, and stability of DDA-E/Z were within acceptable limits. Pharmacokinetic research was conducted using male Sprague-Dawley rats receiving intravenous (1 mg/kg) or intragastric (40 mg/kg) administration of DDA-E or DDA-Z solution. There was a calculated absolute bioavailability of 15.67 % for DDA-E and 4.83 % for DDA-Z when consumed orally. The apparent volume of distribution of intravenous and intragastric administrations were 4.44 ± 0.41 L/kg and 5.18 ± 0.67 L/kg for DDA-E, and 1.56 ± 1.66 L/kg and 2.35 ± 0.42 L/kg for DDA-Z. The maximal plasma concentrations of DDA-E and DDA-Z were 599.84 ± 149.92 nM and 422.09 ± 69.17 nM, and the time to maximum peak were 4.33 ± 3.51 h and 0.70 ± 1.12 h, respectively. In conclusion, in subsequent pharmacodynamics and safety evaluation studies, great attention should be paid to the metabolic characteristics and pharmacokinetic differences between DDA-E and DDA-Z.

Exploring the molecular solvatochromism, stability, reactivity, and non-linear optical response of resveratrol.

This work analyzes the isomerization effects and solvent contributions to the stability, electronic excitations, reactivity, and non-linear optical properties (NLO) of resveratrol molecules within the formalism of the Density Functional Theory. The findings suggest that resveratrol solvatochromism is significantly influenced by solvent polarization. The electronic and free energies (E and G) indicate that trans is the most stable conformer. The system is classified as a strong nucleophile. However, the analysis of the Fukui functions and the Mulliken charges indicate that cis-trans isomerization jointly affects the reactive indices of the carbon and hydrogen atoms. The results also suggest that solvent is relevant to solvatochromism and the NLO response. Both cis and trans conformers present strong excitations that undergo a visible hypsochromic change when the polarity of the solvent increases. Once the absorption spectra are connected to the first hyperpolarization ( ) by the Oudar and Chemla relation, the hypsochromism of resveratrol is the reason for the drop in the generation of the second harmonic when the ambient polarity decreases. The CAM-B3LYP DFT results suggest that resveratrol is interesting for NLO applications. Depending on the choice of solvent, values 50 times those observed for urea ( esu), which is a standard NLO material. The optimized geometries of cis and trans isomers of resveratrol in vacuum were obtained using Density Functional Theory (DFT) with the hybrid exchange-correlation function (CAM-B3LYP) and Pople basis set functions, specifically 6-311++G(d,p). The solvent effect on the geometries of both isomers was included using the polarizable continuum model (PCM) with the same level of QM calculation. Vibrational analysis was conducted to confirm that all optimized geometries correspond to the minimum energy. Various electronic properties, including dipole moments, molecular orbitals, transition energy, dipole polarizabilities, and global reactivity parameters, were calculated using both continuum and discrete solvation models based on the sequential QM/MM methodology. All QM calculations were performed with the Gaussian 09 program and the MC simulations with the DICE program. All NLO analysis was carried out using the Multiwfn code.

Oxidative Substitution of Organocopper(II) by a Carbon-Centered Radical.

Copper-catalyzed coupling reactions of alkyl halides are believed to prominently involve copper(II) species and alkyl radicals as pivotal intermediates, with their exact interaction mechanism being the subject of considerable debate. In this study, a visible light-responsive fluoroalkylcopper(III) complex, [(terpy)Cu(CF3)2(CH2CO2tBu)] Trans-1, was designed to explore the mechanism. Upon exposure to blue LED irradiation, Trans-1 undergoes copper-carbon bond homolysis, generating Cu(II) species and carbon-centered radicals, where the carbon-centered radical then recombines with the Cu(II) intermediate, resulting in the formation of Cis-1, the Cis isomer of Trans-1. Beyond this, a well-defined fluoroalkylcopper(II) intermediate ligated with a sterically hindered ligand was isolated and underwent full characterization and electronic structure studies. The collective experimental, computational, and spectroscopic findings in this work strongly suggest that organocopper(II) engages with carbon-centered radicals via an "oxidative substitution" mechanism, which is likely the operational pathway for copper-catalyzed C-H bond trifluoromethylation reactions.

Self-assembly via hydrogen bonding of bis(18-crown-6)-1,3-distyrylbenzene and [2 + 2] photocycloaddition: Stereoselective synthesis of [2.2]metacyclophanes and butterfly-type thermal isomerization

The photochemistry of bis(18-crown-6)-containing 1,3-distyrylbenzene and its 2 : 2 bis-pseudo-sandwich complex with ethane-1,2-diammonium was studied. The UV irradiation of the supramolecular complex resulted in the formation of three geometric isomers of tetracrown-containing dicyclobutano[2.2]metacyclopane, differing in the orientation of the cyclobutane moieties, with the unsymmetrical isomer (>50 %) predominating. The diammonium cations used as the template could be removed after photolysis by simple extraction, and the product was obtained in high yield (82 %). The 1H NMR signals of a mixture of geometric isomers of [2.2]metacyclophane derivative were assigned resorting to quantum chemistry methods (DFT). The kinetic and thermodynamic parameters of thermal isomerization between the endo,endo- and exo,exo-isomers were measured. Tetracrown-containing dicyclobutano[2.2]metacyclophanes are homotetratopic ligands that contain four binding sites for metal and ammonium cations, which is of interest for the design of photo- and thermo-switchable supramolecular devices with a variable complex formation behavior and supramolecular machines owing to the butterfly-type thermal isomerization.

Cryogenic Ion Vibrational Spectroscopy of Protonated Valine: Messenger Tag Effects.

We report the infrared photodissociation spectrum of tagged protonated valine in the range 1000-1900 cm-1, prepared in a cryogenic ion trap. Comparison of experimental results with calculated infrared spectra based on density functional theory shows that the hydroxyl group of the carboxylic acid functionality and the protonated amine group adopt a trans configuration. Nitrogen and methane molecules were used as messenger tags with optimal tagging temperatures of 30 K for N2 and 60 K for CH4. While the calculated infrared spectra of the tagged ion suggest only a weak influence of the messenger tag on the frequency positions of ValH+, the measured intensities for N2-tagged ValH+ appear strongly suppressed for all but the highest frequency feature at 1773 cm-1. We trace this behavior to the binding energy of the N2 tag, which is significantly higher than that of CH4, based on density functional and coupled cluster calculations and rate estimates for photoinduced unimolecular dissociation from statistical theory.

"Cyclophilin A" Enzymatic Effect on the Aggregation Behavior of 1N4R Tau Protein: An Overlooked Crucial Determinant that should be Re-considered in Alzheimer's Disease Pathogenesis.

Neurodegenerative disorders like Alzheimer's disease (AD) involve the abnormal aggregation of tau protein, which forms toxic oligomers and amyloid deposits. The structure of tau protein is influenced by the conformational states of distinct proline residues, which are regulated by peptidyl-prolyl isomerases (PPIases). However, there has been no research on the impact of human cyclophilin A (CypA) as a PPIase on (non-phosphorylated) tau protein aggregation. On the basis of these explanations, we used various spectroscopic techniques to explore the effects of CypA on tau protein aggregation behavior. We demonstrated the role of the isomerization activity of CypA in promoting the formation of tau protein amyloid fibrils with well-defined and highly ordered cross-β structures. According to the "cistauosis hypothesis," CypA's ability to enhance tau protein fibril formation in AD is attributed to the isomerization of specific proline residues from the trans to cis configuration. To corroborate this theory, we conducted refolding experiments using lysozyme as a model protein. The presence of CypA increased lysozyme aggregation and impeded its refolding process. It is known that proper refolding of lysozyme relies on the correct (trans) isomerization of two critical proline residues. Thus, our findings confirmed that CypA induces the trans-to-cis isomerization of specific proline residues, ultimately leading to increased aggregation. Overall, this study highlights the emerging role of isomerization in tau protein pathogenesis in AD.

Stilbenes in Carex acuta and Carex lepidocarpa.

Stilbenes in the roots of Carex acuta and Carex lepidocarpa were studied. Root samples were extracted with 100% methanol and analyzed by HPLC and LC-MS. In this way, trans-resveratrol dimers (m/z 455 Da [M + H]+), trimers (m/z 681 Da [M + H]+) and tetramers (m/z 907 Da [M + H]+) were identified in the extracts. Using LC-NMR in stop-flow mode, pallidol and trans-ε-viniferin as dimers were identified. After the separation of individual peaks and their measurement by 1H NMR, cis and trans-miyabenol A as a tetramer and cis-miyabenol C as a trimer were identified. In the case of miyabenol A, it is a chromatographically inseparable mixture of cis and trans isomers in the ratio of 2:3 according to 1H NMR measurement. In the case of cis-miyabenol C, the Z-trans-trans-miyabenol C configuration was confirmed. The remaining unidentified peak with a practically identical UV-VIS spectrum to that of cis-miyabenol C is most likely another isomer of miyabenol C.

Mechanical Efficiency of Photochromic Nanomotors, From First Principles.

Photochromic molecular motors hold promise for a multitude of potential applications in fields ranging from medicine to communications and structural repair. Yet, it is still a challenge to predict their mechanical efficiency. Here, azobenzene is explored as a representative light-driven nanomotor and estimate its quantum yield of photoisomerization and maximum mechanical efficiency. This is based on first-principles mapping of the 3D potential energy surfaces for the ground and excited states of the trans and cis configurations and identifying the minimum energy pathway for isomerization. A work cycle is devised and identifies force constant as the parameter that resembles temperature in the Carnot heat engine, but with very different efficiencies. The results show that the optomechanical efficiency of azobenzene at constant load is about 5% albeit under ideal conditions. To test the hypothesis, the study also explores the optomechanical efficiency of stilbene and 2-butene and shows that their efficiency does not exceed 5%.

Concerning the structures of Lewis base adducts of titanium(IV) hexafluoroisopropoxide.

The reaction of titanium(IV) chloride with sodium hexafluoroisopropoxide, carried out in hexafluoroisopropanol, produces titanium(IV) hexafluoroisopropoxide, which is a liquid at room temperature. Recrystallization from coordinating solvents, such as acetonitrile or tetrahydrofuran, results in the formation of bis-solvate complexes. These compounds are of interest as possible Ziegler-Natta polymerization catalysts. The acetonitrile complex had been structurally characterized previously and adopts a distorted octahedral structure in which the nitrile ligands adopt a cis configuration, with nitrogen lone pairs coordinated to the metal. The low-melting tetrahydrofuran complex has not provided crystals suitable for single-crystal X-ray analysis. However, the structure of chloridotris(hexafluoroisopropoxido-κO)bis(tetrahydrofuran-κO)titanium(IV), [Ti(C3HF6O)3Cl(C4H8O)2], has been obtained and adopts a distorted octahedral coordination geometry, with a facial arrangement of the alkoxide ligands and adjacent tetrahydrofuran ligands, coordinated by way of metal-oxygen polar coordinate interactions.

Preparation of two amphiphilic dendritic small molecule gelators based on poly (aryl ether) modified silica-based chromatographic stationary phases and molecular shape recognition for shape-restricted isomers

Geometric isomers tend to have similar polarities and differ only in molecular shape. Vigorously developing new stationary phases to meet the requirements for the separation of isomers that have similar physicochemical properties is still an urgent topic in separation science. Poly (arylene ether)-based dendrimers are known for their multifunctional branched peripheral structures and high self-assembly properties. In this paper, two amphiphilic dendritic organic small molecule gelling agents based on poly (aryl ether), PAE-ANT and PAE-PA, were prepared and conjugated to the silica surface. SiO2@PAE-ANT and SiO2@PAE-PA were used as HPLC stationary phases for the separation of non-polar shape-restricted isomers. Both stationary phases have very high molecular shape selectivity for isomers such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), tocopherols and carotenoids. Separation of cis-trans geometric isomers such as diethylstilbestrol and polar compounds such as monosubstituted benzenes and anilines can also be achieved. These two columns offer more flexible selectivity and higher separation performance than commercial C18 and phenyl columns. There is a difference in molecular shape selectivity between the two stationary phases for the same analyte test probes. SiO2@PAE-ANT showed slightly better linear selectivity for non-polar shape-restricted isomers compared to SiO2@PAE-PA with Janus-type PAE-PA bonding phase. This separation behavior may be attributed to the ordered spatial structure formed by the gel factor on the surface of the stationary phase and the combined effect of multiple weak interaction centers (hydrophobic, hydrophilic, hydrogen bonding and π-π interactions). It was also possible to separate nucleoside and nucleobase strongly polar compounds well in the HILIC mode, suggesting that hydrophilic groups in PAE-ANT and PAE-PA are involved in the interactions, reflecting their amphiphilic nature.The results show that the ordered gelation of dendritic organic small molecule gelators on the SiO2 surface, along with multiple carbonyl-π, π-π and other interactions, play a crucial role in the separating shape-restricted isomers. The integrated and ordered functional groups serve as the primary driving force behind the exceptionally high molecular shape selectivity of SiO2@PAE-ANT and SiO2@PAE-PA phases. Alterations in the structure of dendritic organic small molecule gelators can impact both molecular orientation and recognition ability, while changes in the type of functional groups influences the separation mechanism of shape-restricted isomers.

On-Surface Formation and Chemical Transformations of Indigo Coordination Polymers

Coordination polymers are attractive candidates for miniaturized electronics. With unconventional electronic and magnetic properties posited, they are interesting for multiple applications including magnetic information storage and spintronics. Natural products are appealing to tailor advanced new materials, bearing inherent advantages in biodegradation. Among them, we distinguished indigo, a common natural dye with a distinctive blue color, used as a pigment since antiquity. Motivated by its optical properties and the reported metal complexes [1], we employed it as a molecular building block for the surface formation of coordination polymers with iron.We report on the on-surface formation of extended coordination polymers which controllably feature the cis and the transmonomers of the molecular building block. The reaction products of indigo and Fe were characterized atomically by a combination of state-of-the -art experimental and theoretical techniques. By a combination of X-ray photoelectron spectroscopy and scanning tunneling microscopy (STM), it is found that indigo deprotonates and coordinates with Fe atoms on silver surfaces. We identify unambiguously well-defined coordination polymers composed of (1 dehydroindigo : 1 Fe) repeat units with STM, bond-resolving atomic force microscopy and density functional theory (DFT) simulations. On both Ag(100) and on Ag(111), the trans configuration of dehydroindigo results in N,O-chelation in the polymer chains. On the more inert Ag(111) surface, the molecules undergo thermally induced isomerization from the trans to the cisconfiguration and afford N,N- plus O,O-chelation (see figure). This is enabled by the dehydrogenation and is preferential solely in the environment of the coordination chain on Ag(111). DFT calculations also confirm that the coordination polymers of the cis-isomers on Ag(111) and of the trans-isomers on Ag(100) are energetically favored.Our results demonstrate post-synthetic linker isomerization in interfacial metal-organic nanosystems. Both types of coordination polymers are predicted to be spin-crossover systems and the isomerization is anticipated to have a significant impact on their magnetic properties.

Cis -decalin tetramic acid metabolite from a mangrove derived endophytic fungus Nigrospora oryzae.

Most of the natural products containing tetramic acid have trans configuration of the decalin moiety. Undana A (1), a new cis decalin-bearing tetramic acid metabolite was isolated from endophytic fungi Nigrospora oryzae associated with Avicennia marina. The structure was determined based on the mass and NMR spectral data together with the comparison of the literature. This is the first report of cis decalin-tetramic acid metabolite from the mangrove endophytic fungus. Compound 1 was tested for cytotoxic against L5178Y mouse cancer cells and antibacterial activity against several gram-positive including MRSA and gram-negative bacteria but was found inactive.

3-Substituted 6-Azabicyclo[3.1.1]heptanes: Nonclassical Piperidine Isosteres for Drug Discovery.

Advanced analogs of piperidine and smaller homologues of tropane─3-substituted 6-azabicyclo[3.1.1]heptanes─were synthesized on a large scale using readily available bulk reagents. The key step of the approach involved the double alkylation reaction of malonate with cis-2,4-bis(mesyloxymethyl)azetidine-1-carboxylate, in turn easily prepared on up to 1 kg scale. After hydrolysis, N-Boc-6-azabicyclo[3.1.1]heptane-3,3-dicarboxylic acid was obtained (up to 400 g in a single run), which was used as a common intermediate for the preparation of all the title building blocks. In particular, Pb(OAc)4-mediated oxidative decarboxylation of this intermediate gave 2,6-methanopiperidone derivative (up to 400 g scale), while monodecarboxylation gave N-Boc-6-azabicyclo[3.1.1]heptane-3-carboxylic acids as an easily separatable mixture of cis and trans diastereomers (up to 100 g scale). Further functional group transformations gave diastereopure cis- and trans-N-Boc-monoprotected diamines and amino alcohols. Molecular structure analysis using exit vector parameters (EVP) revealed that cis isomers of 3-substituted 6-azabicyclo[3.1.1]heptanes are three-dimensional analogs of common 1,4-disubstituted piperidine chair conformer, whereas trans isomers can be considered as unusual "boat" piperidines.

Solution State‐Like Reactivity of a Flexible Crystalline Werner‐Type Metal Complex

AbstractFlexible crystalline solids exhibit unique properties in response to external stimuli like heat and light. However, challenges exist in developing crystalline solids that have similar degrees of flexibility as in solution. Herein, we report the preparation of the new flexible crystalline metal complex [Cd(CF3SO3)2(4‐spy)4] (4‐spy=4‐styrylpyridine), which contains photoreactive 4‐spy ligand. Unlike traditional solids, this metal complex displays solution state‐like [2+2] photocycloaddition reactivity. Specifically, UV irradiation of the crystalline material leads to formation of the same diverse array of dimers and cis isomer that are generated by photoreaction in the solution state. In addition, the photoresponsive flexibility of the solid leads to a photosalient effect and photo‐induced formation of pores. The origin of the solution state‐like photoreactivity of the solid is related to properties of the Cd(II) cation and fluorinated CF3SO3 anion, and the multi‐orientational arrangement of the 4‐spy ligands.

A novel cinnamic and caffeic acid-conjugated peptide analogs with anticonvulsant and analgesic potency: Comparative analyses of trans/cis isomers.

The novel cinnamic acid (CA) (H4-CA, H5-CA, and H7-CA) and caffeic acid (KA) (H4-KA, H5-KA, and H7-KA) hemorphin analogs have recently been synthesized and their trans isomers have been tested for antiseizure and antinociceptive activity. In the present study, the cis forms of these compounds were tested and compared with their trans isomers in seizure and nociception tests in mice. The cis-H5-CA and H7-CA compounds showed efficacy against psychomotor seizures, whereas the trans isomers were ineffective. Both the cis and trans KA isomers were ineffective in the 6-Hz test. In the maximal electroshock (MES) test, the cis isomers showed superior antiseizure activity to the trans forms of CA and KA conjugates, respectively. The suppression of seizure propagation by cis-H5-CA and the cis-H5-KA was reversed by a kappa opioid receptor (KOR) antagonist. Naloxone and naltrindole were not effective. The cis-isomers of CA conjugates and cis-H7-KA produced significantly stronger antinociceptive effects than their trans-isomers. The cis-H5-CA antinociception was blocked by naloxone in the acute phase and by naloxone and KOR antagonists in the inflammatory phase of the formalin test. The antinociception of the KA conjugates was not abolished by opioid receptor blockade. None of the tested conjugates affected the thermal nociceptive threshold. The results of the docking analysis also suggest a model-specific mechanism related to the activity of the cis-isomers of CA and KA conjugates in relation to opioid receptors. Our findings pave the way for the further development of novel opioid-related antiseizure and antinociceptive therapeutics.

Mechanical Effect Produced by Photo‐Switchable Reactions: Insights from Molecular Simulations

AbstractLight‐responsive shape‐changing polymers are photonastic materials: they can convert light into mechanical energy through macroscopic transformations. Indeed, photochromic molecules embedded in these polymer films present light‐induced structural modifications that can trigger a significant macroscopic deformation. In this theoretical study based on molecular dynamics simulations, analysis tools ranging from atomic to supramolecular scales are developed to investigate this photonastic phenomenon. To this purpose, a model system built upon an azobenzene photochrome embedded in different environments (tetrahydrofuran, cis‐1,4‐polybutadiene and hydroxyl‐terminated polybutadiene) is considered. First, the impact of the environment on the photochrome properties is discussed through the analysis of the structural properties, ultra‐violet visible (UV–vis) absorption spectra and dynamical properties of the photoswitch. Then, the impact of the presence of the photochrome on the polymer is studied. At the atomic scale, the radial distribution functions show some differences between the cis and trans isomers due to geometrical effects. At the molecular scale, the analysis of the size and shape of the polymer chains reveals that the photochrome has no impact on the chain properties. Finally, at the macroscopic scale, the cohesive energy density shows that the polymer is stabilized by the presence of photochrome molecules.