Traditional Trimming Research Articles

Calibration of Ring Oscillator-Based Integrated Temperature Sensors for Power Management Systems.

This paper details the development and validation of a temperature sensing methodology using an un-trimmed oscillator-based integrated sensor implemented in the 0.18-μm SOI XFAB process, with a focus on thermal monitoring in system-on-chip (SoC) based DC-DC converters. Our study identifies a quadratic relationship between the oscillator output frequency and temperature, which forms the basis of our proposed calibration mechanism. This mechanism aims at mitigating process variation effects, enabling accurate temperature-to-frequency mapping. Our research proposes and characterizes several trimming-free calibration techniques, covering a spectrum from zero to thirty-one frequency-temperature measurement points. Notably, the Corrected One-Point calibration method, requiring only a single ambient temperature measurement, emerges as a practical solution that removes the need for a temperature chamber. This method, after adjustment, successfully reduces the maximum error to within ±2.95 °C. Additionally, the Two-Point calibration method demonstrates improved precision with a maximum positive error of +1.56 °C at -15 °C and a maximum negative error of -3.13 °C at +10 °C (R2 value of 0.9958). The Three-Point calibration method performed similarly, yielding an R2 value of 0.9956. The findings of this study indicate that competitive results in temperature sensor calibration can be achieved without circuit trimming, offering a viable alternative or a complementary approach to traditional trimming techniques.

Confocal autofluorescence microscopy revealed the fine morphology of the amber preserved mite Congovidia glesoconomorphi sp. nov. (Acari: Hemisarcoptidae) phoretic on a mycterid beetle

We examined three astigmatic mite specimens phoretic on the beetle Glesoconomorphus ekaterinae from Eocene Rovno amber. Due to the precious nature of this amber piece, housing the name-bearing holotype of the host beetle, traditional trimming for the application of high-resolution imaging techniques at small focal distances was unfeasible. To overcome this challenge, we employed a combination of confocal microscopy relying on the autofluorescence properties of the mite chitinous exoskeleton and long working distance / water immersion objectives. This innovative approach successfully resolved the minute mite features from a considerable distance (700 μm). Based on these data, we describe many taxonomically important characters and identify these mites as a new species, Congovidia glesoconomorphi sp. nov., within the family Hemisarcoptidae. This represents the first fossil record for the mite family. Additionally, we provide a key for phoretic deutonymphs of all known species of Congovidia. As larvae of many extant Eurypinae live in subcortical spaces of decomposing tree trunks, we suggest that the mite C. glesoconomorphi similarly occupied subcortical niches in decayed wood and utilized adult beetles of G. ekaterinae for dispersal.

Quality of Trimming and its Effect on Stretch Flanging of Automotive Panels

Traditional trimming requires accurate alignment of the die shearing edges, typically 5–10% of the blank thickness. Increasing the clearance above the recommended value often leads to generation of burrs on the trimmed surface. These burrs may create difficulties for flanging and hemming operations. Details of trimming technology for panels made out of aluminum sheet AA6111-T4 with elastic offal support will be discussed, including such factors as die radii of the tooling, effect of tooling wear, and trimming angle on the quality of trimmed surface. Also, imperfections on the trimmed edge of the panel may result in reduced formability in stretched flanging and hemming operations. Experimental results quantifying the behavior of trimmed surface in stretching will be provided for both a conventional trimming process and a newly developed process.

New trim configurations for laser trimmed thick-film resistors—theoretical analysis, numerical simulation and experimental verification

In this paper a new approach to laser trimming is investigated and compared with traditional trimming. It relies on creating an additional contact for lowering resistance values thus simplifying the design and widening resistance trimming ranges. This enables to achieve a correction with shorter cut length of, so it can lead to a faster and cheaper fabrication process of hybrid integrated circuit. This paper analyses trimming range and trimming characteristics computed for different shapes of added contact using a new, very fast and easily programmable method. Moreover the experimental verification of such approach is presented. The relative trimming range and sensitivity are analyzed as a function of additional contact shape and cut length. Next long-term stability, pulse durability and low frequency noise are compared for two- and three-contact resistors versus trim pathway length.

Effects of ground surface deformability, trimming, and shoeing on quasistatic hoof loading patterns in horses.

To determine whether solar load distribution pattern on a solid nondeformable ground surface is the product of contact erosion and is the mirror image of load distribution on a deformable surface in horses. 30 clinically normal horses. Solar load distribution was compared among 25 clinically normal horses during quasistatic loading on a solid nondeformable surface and on a highly deformable surface. Changes in solar load distribution patterns were evaluated in 5 previously pasture-maintained horses housed on a flat nondeformable surface. Changes in solar load distribution created by traditional trimming and shoeing were recorded. Unshod untrimmed horses had a 4-point (12/25, 48%) or a 3-point (13/25, 52%) wall load distribution pattern on a flat solid surface. Load distribution on a deformable ground surface was principally solar and located transversely across the central region of the foot. Ground surface contact areas on solid (24.2 +/- 8.62 cm2) and deformable (69.4 +/- 22.55 cm2) surfaces were significantly different. Maintaining unshod horses on a flat nondeformable surface resulted in a loss of the 3- and 4-point loading pattern and an increase in ground surface contact area (17.9 +/- 2.77 to 39.9 +/- 12.77 cm2). Trimming increased ground surface contact area (24.2 +/- 8.60 to 45.7 +/- 14.89 cm2). In horses, the solar surface is the primary weight-loading surface, and deformability of ground surface may have a role in foot expansion during loading. Increased surface area induced by loading on deformable surfaces, trimming, and shoeing protects the foot.

Functional and Corrective Claw Trimming

Foot care and claw trimming require proper systems for restraint, sharp knives and trimming equipment, and an understanding of the biomechanics of weight bearing and hoof overgrowth in cattle. The objective of functional claw trimming is to correct hoof overgrowth, thereby re-establishing appropriate weight bearing within and between the claws of each foot. Traditional trimming methods fail to achieve these objectives. Corrective trimming procedures are applied to horn lesions affecting the claw capsule. Primary objectives of corrective trimming are to adjust weight bearing to provide rest for diseased claws and to remove loose horn and hard ridges that may cause further injury to the corium. The application of a foot block to the healthy claw is a valuable aid in foot care when corrective trimming alone is insufficient to provide needed relief from weight bearing. Finally, the use of topical treatments under a bandage is controversial. It is recommended that caustic treatments be avoided and that the use of a bandage be limited to conditions requiring hemostasis or when operators are committed to their removal within a period of 2 to 5 days depending on the level of environmental contamination.