Traditional NMR Methods Research Articles

Residual Dipolar Couplings for Resolving Cysteine Bridges in Disulfide-Rich Peptides.

Disulfide bridges in proteins are formed by the oxidation of pairs of cysteine residues. These cross-links play a critical role in stabilizing the 3D-structure of small disulfide rich polypeptides such as hormones and venom toxins. The arrangement of the multiple disulfide bonds directs the peptide fold into distinct structural motifs that have evolved for resistance against biochemical and physical insults. These structural scaffolds have, therefore, proven to be very attractive in bioengineering efforts to develop novel biologics with applications in health and agriculture. Structural characterization of small disulfide rich peptides (DRPs) presents unique challenges when using commonly applied biophysical methods. NMR is the most commonly used method for studying such molecules, where the relatively small size of these molecules results in highly precise structural ensembles defined by a large number of distance and dihedral angle restraints per amino acid. However, in NMR the sulfur atoms that are involved in three of the five dihedral angles in a disulfide bond cannot be readily measured. Given the central role of disulfide bonds in the structure of these molecules, it is unclear what the inherent resolution of such NMR structures is when using traditional NMR methods. Here, we use an extensive set of long-range residual dipolar couplings (RDCs) to assess the resolution of the NMR structure of a disulfide-rich peptide. We find that structures based primarily on NOEs, yield ensembles that are equivalent to a crystallographic resolution of 2-3 Å in resolution, and that incorporation of RDCs reduces this to ~1-1.5 Å resolution. At this resolution the sidechain of ordered amino acids can be defined accurately, allowing the geometry of the cysteine bridges to be better defined, and allowing for disulfide-bond connectivities to be determined with high confidence. The observed improvements in resolution when using RDCs is remarkable considering the small size of these peptides.

Characterization of Dynamic IDP Complexes by NMR Spectroscopy.

NMR spectroscopy has proven to be a key method for studying intrinsically disordered proteins (IDPs). Nonetheless, traditional NMR methods developed for solving structures of ordered protein complexes are insufficient for the full characterization of dynamic IDP complexes, where the energy landscape is broader and more rugged. Furthermore, due to their high sensitivity to environmental changes, NMR studies of IDP complexes must be conducted with extra care and the observed NMR parameters thoroughly evaluated to enable disentanglement of binding events from ensemble distribution changes. In this chapter, written for the non-NMR expert, we start out by outlining sample preparation for IDP complexes, guide through the recording and evaluation of diagnostic 1H,15N-HSQC spectra, and delineate more sophisticated NMR strategies to follow for the particular type of complex. The most relevant experiments are then described in terms of aims, needs, pitfalls, analysis, and expected outcomes, with references to recent examples.

Nuclear Magnetic Resonance of Hyperpolarized Fluorine for Characterization of Protein–Ligand Interactions

Fluorine NMR spectroscopy is widely used for detection of protein-ligand interactions in drug discovery because of the simplicity of fluorine spectra combined with a relatively high likelihood for a drug molecule to include at least one fluorine atom. In general, an important limitation of NMR spectroscopy in drug discovery is its sensitivity, which results in the need for unphysiologically high protein concentrations and large ligand:protein ratios. An enhancement in the (19)F signal of several thousand fold by dynamic nuclear polarization allows for the detection of submicromolar concentrations of fluorinated small molecules. Techniques for exploiting this gain in signal to detect ligands in the strong-, intermediate-, and weak-binding regimes are presented. Similar to conventional NMR analysis, dissociation constants are determined. However, the ability to use a low ligand concentration permits the detection of ligands in slow exchange that are not easily amenable to drug screening by traditional NMR methods. The relative speed and additional information gained may make the hyperpolarization-based approach an interesting alternative for use in drug discovery.

Probing exchange kinetics and atomic resolution dynamics in high-molecular-weight complexes using dark-state exchange saturation transfer NMR spectroscopy

We present the protocol for the measurement and analysis of dark-state exchange saturation transfer (DEST), a novel solution NMR method for characterizing, at atomic resolution, the interaction between an NMR-'visible' free species and an NMR-'invisible' species transiently bound to a very high-molecular-weight (>1 MDa) macromolecular entity. The reduced rate of reorientational motion in the bound state that precludes characterization by traditional NMR methods permits the observation of DEST. (15)N-DEST profiles are measured on a sample comprising the dark state in exchange with an NMR-visible species; in addition, the difference (ΔR(2)) in (15)N transverse relaxation rates between this sample and a control sample comprising only the NMR-visible species is also obtained. The (15)N-DEST and ΔR(2) data for all residues are then fitted simultaneously to the McConnell equations for various exchange models describing the residue-specific dynamics in the bound state(s) and the interconversion rate constants. Although the length of the experiments depends strongly on sample conditions, approximately 1 week of NMR spectrometer time was sufficient for full characterization of samples of amyloid-β (Aβ) at concentrations of ~100 μM.

Determination of solution structures of proteins up to 40 kDa using CS-Rosetta with sparse NMR data from deuterated samples

We have developed an approach for determining NMR structures of proteins over 20kDa that utilizes sparse distance restraints obtained using transverse relaxation optimized spectroscopy experiments on perdeuterated samples to guide RASREC Rosetta NMR structure calculations. The method was tested on 11 proteins ranging from 15 to 40kDa, seven of which were previously unsolved. The RASREC Rosetta models were in good agreement with models obtained using traditional NMR methods with larger restraint sets. In five cases X-ray structures were determined or were available, allowing comparison of the accuracy of the Rosetta models and conventional NMR models. In all five cases, the Rosetta models were more similar to the X-ray structures over both the backbone and side-chain conformations than the "best effort" structures determined by conventional methods. The incorporation of sparse distance restraints into RASREC Rosetta allows routine determination of high-quality solution NMR structures for proteins up to 40kDa, and should be broadly useful in structural biology.

Transient, Sparsely Populated Compact States of Apo and Calcium-Loaded Calmodulin Probed by Paramagnetic Relaxation Enhancement: Interplay of Conformational Selection and Induced Fit

Calmodulin (CaM) is the universal calcium sensor in eukaryotes, regulating the function of numerous proteins. Crystallography and NMR show that free CaM-4Ca(2+) exists in an extended conformation with significant interdomain separation, but clamps down upon target peptides to form a highly compact structure. NMR has revealed substantial interdomain motions in CaM-4Ca(2+), enabled by a flexible linker. In one instance, CaM-4Ca(2+) has been crystallized in a compact configuration; however, no direct evidence for transient interdomain contacts has been observed in solution, and little is known about how large-scale interdomain motions contribute to biological function. Here, we use paramagnetic relaxation enhancement (PRE) to characterize transient compact states of free CaM that are too sparsely populated to observe by traditional NMR methods. We show that unbound CaM samples a range of compact structures, populated at 5-10%, and that Ca(2+) dramatically alters the distribution of these configurations in favor of states resembling the peptide-bound structure. In the absence of Ca(2+), the target peptide binds only to the C-terminal domain, and the distribution of compact states is similar with and without peptide. These data suggest an alternative pathway of CaM action in which CaM remains associated with its kinase targets even in the resting state. Only CaM-4Ca(2+), however, shows an innate propensity to form the physiologically active compact structures, suggesting that Ca(2+) activates CaM not only through local structural changes within each domain but also through more global remodeling of interdomain interactions. Thus, these findings illustrate the subtle interplay between conformational selection and induced fit.

Three‐dimensional structure of the weakly associated protein homodimer SeR13 using RDCs and paramagnetic surface mapping

The traditional NMR-based method for determining oligomeric protein structure usually involves distinguishing and assigning intra- and intersubunit NOEs. This task becomes challenging when determining symmetric homo-dimer structures because NOE cross-peaks from a given pair of protons occur at the same position whether intra- or intersubunit in origin. While there are isotope-filtering strategies for distinguishing intra from intermolecular NOE interactions in these cases, they are laborious and often prove ineffectual in cases of weak dimers, where observation of intermolecular NOEs is rare. Here, we present an efficient procedure for weak dimer structure determination based on residual dipolar couplings (RDCs), chemical shift changes upon dilution, and paramagnetic surface perturbations. This procedure is applied to the Northeast Structural Genomics Consortium protein target, SeR13, a negatively charged Staphylococcus epidermidis dimeric protein (K(d) 3.4 ± 1.4 mM) composed of 86 amino acids. A structure determination for the monomeric form using traditional NMR methods is presented, followed by a dimer structure determination using docking under orientation constraints from RDCs data, and scoring under residue pair potentials and shape-based predictions of RDCs. Validation using paramagnetic surface perturbation and chemical shift perturbation data acquired on sample dilution is also presented. The general utility of the dimer structure determination procedure and the possible relevance of SeR13 dimer formation are discussed.

SOS-NMR: a saturation transfer NMR-based method for determining the structures of protein-ligand complexes.

An NMR-based alternative to traditional X-ray crystallography and NMR methods for structure-based drug design is described that enables the structure determination of ligands complexed to virtually any biomolecular target regardless of size, composition, or oligomeric state. The method utilizes saturation transfer difference (STD) NMR spectroscopy performed on a ligand complexed to a series of target samples that have been deuterated everywhere except for specific amino acid types. In this way, the amino acid composition of the ligand-binding site can be defined, and, given the three-dimensional structure of the protein target, the three-dimensional structure of the protein-ligand complex can be determined. Unlike earlier NMR methods for solving the structures of protein-ligand complexes, no protein resonance assignments are necessary. Thus, the approach has broad potential applications--especially in cases where X-ray crystallography and traditional NMR methods have failed to produce structural data. The method is called SOS-NMR for structural information using Overhauser effects and selective labeling and is validated on two protein-ligand complexes: FKBP complexed to 2-(3'-pyridyl)-benzimidazole and MurA complexed to uridine diphosphate N-acetylglucosamine.

Conformational analysis of a flexible oligosaccharide using residual dipolar couplings.

We present a new approach to the analysis of the conformational and the motional properties of an oligosaccharide, methyl 3,6-di-O-(alpha-D-mannopyranosyl)-alpha-D-mannopyranoside. The approach relies on an order matrix analysis of residual dipolar couplings in the solution state. By combining a number of different types of couplings, (1)D(CH), (2)D(CH), and D(HH), an order matrix is solved for each ring of the trimannoside. The resulting order parameters indicate the internal motion at the alpha (1,3) linkage to be limited, while significant motion is suggested at the alpha (1,6) linkage. Two structures for the trimannoside were determined by aligning the order tensor principal axes obtained from two different orienting media, bicelles and phage. The very similar conformations at the alpha (1,3) linkage of these two structures confirm that the internal motion at the alpha (1,3) linkage is small and the conformation is a good representation of a single preferred structure. The different conformations at the alpha (1,6) linkage suggest that the motional amplitudes are large and the conformations must be viewed as virtual conformers. Compared with traditional NMR methods, data acquisition is easy and data analysis is straightforward.