Traditional Coil Research Articles

Structure optimization of transmission coil of wireless power transmission system for rail transit vehicles

Abstract To solve the transmission efficiency problem of traditional wireless energy systems applied to rail transit vehicles. In this paper, the key components of a wireless power transmission system, such as the transmission efficiency of the transmission coil and the poor anti-deviation ability of the coil, are studied. Firstly, this paper analyzes the traditional planar circular and square coil shapes, analyzes the magnetic field characteristics of the traditional transmission coil structures by ANSYS Maxwell simulation software, and obtains the advantages and disadvantages of different coil structures. According to the analysis structure, the coil structure is optimized and improved, and the coil structure form of the combined coil is put forward. Through the comparative analysis of finite element simulation software, it is attested that combined coil structure has a significant improvement in transmission efficiency and anti-deviation ability.

The Difference between Traditional Magnetic Stimulation and Microcoil Stimulation: Threshold and the Electric Field Gradient

This paper considers the threshold value of the activating function needed for stimulation in traditional magnetic stimulation and microcoil stimulation. Two analyses of excitation have been studied: spatial frequency analysis and active membrane analysis using the Hodgkin−Huxley model. The activating function depends on the spatial distribution of the electric field gradient in the active membrane analysis and the spatial frequency in the spatial frequency analysis. Both analyses show that a microcoil (tens of microns in size) has a higher threshold than a traditional coil (tens of millimeters in size) when the spatial frequency is large or the spatial extent of the activating function is small. Consequently, the stimulation threshold for a microcoil is much higher than that for a conventional coil.

Research on FPC coils with limited turns in planar electromagnetic tomography

Electromagnetic tomography (EMT) is a non-destructive testing method that reconstructs electrical parameter distribution based on boundary electromagnetic measurement data along electromagnetic rotation projection. The coil is a critical component of the EMT system, used to excite and detect changing magnetic fields. The performance of excitation-detection with specific coils directly affects the quality of the reconstructed image. The traditional EMT coils are wound coils. The excitation-detection performance of the coils is enhanced by increasing the number of turns to obtain better imaging quality. A larger coil volume has better sensitivity, but it cannot meet the space constraints of many applications. To solve this problem, this paper proposes a method using extremely thin FPC coil arrays as EMT sensors. To verify the feasibility of FPC coil imaging with a limited number of turns, firstly, this article analyses the excitation-detection capabilities of FPC coil with 1 to 12 turns through a combination of simulation and experiment. Secondly, the impact of excitation-detection capability on the EMT sensitivity matrix was studied. Finally, a 4×4 8-Turns FPC coil sensor was designed for image reconstruction experiments. The experimental results show that FPC coils with limited turns can be used for image reconstruction and to solve the problem of planar nondestructive testing in a small space.

Optimized design of cubic grid coil system with high space utilization ratio for weak biomagnetic signal measurement

The uniform field coils with large uniform region are important for improving the resolution in bio-magnetic signal measurements. The traditional coil design methods suffer from small space utilization ratio which limits the mobility and accuracy of bio-magnetic signal measurements. In this paper, a novel cubic grid coil (CGC) design method is presented, with significantly improved space utilization ratio and simple structure. The iterative fastest current drop method (IFCD) is proposed to simplify coil structure, thus ensuring the controllability of the cubic grid coil system. The superiority of CGCs has been demonstrated by finite element simulations and a series of experiments. The space utilization ratio of CGCs reaches 22.4% while maintaining 2% inhomogeneity, improved by about 6 times compared with traditional coils. Furthermore, the CGC-based system for directly eliminating the geomagnetic field achieves a low residual magnetic field noise of 29.7 pT/Hz/1/2 at 1 Hz. The CGCs can provide new ideas for high-resolution, lightweight mobile measurements of weak bio-magnetic signals in the human body.

RF coil that minimizes electronic components while enhancing performance for rodent MRI at 7 Tesla.

This study introduces a novel volume coil design that features two slotted end-plates connected by six rungs, resembling the traditional birdcage coil. The end rings are equipped with six evenly distributed circular slots, inspired by Mansfield's cavity resonator theory, which suggests that circular slots can generate a baseline resonant frequency. One notable advantage of this proposed coil design is its reduced reliance on electronic components compared to other volume coils, making it more efficient. Additionally, the dimensions of the coil can be theoretically computed in advance, enhancing its practicality. To evaluate the performance and safety of the coil, electromagnetic field and specific absorption rate simulations were simulated using a cylindrical saline phantom and the finite element method. Furthermore, a transceiver coil prototype optimized for 7 Tesla and driven in quadrature was constructed, enabling whole-body imaging of rats. The resonant frequency of the coil prototype obtained through experimental measurements closely matched the theoretical frequency derived from Mansfield's theory. To validate the coil design, phantom images were acquired to demonstrate its viability and assess its performance. These images also served to validate the magnetic field simulations. The experimental results aligned well with the simulation findings, confirming the reliability of the proposed coil design. Importantly, the prototype coil showcased significant improvements over a similarly-sized birdcage coil, indicating its potential for enhanced performance. The noise figure was lower in the prototype versus the birdcage coil (NFbirdcage-NFslotcage= 0.7). Phantom image data were also used to compute the image SNR, giving SNRslotcage/SNRbirdcage= 34.36/24.34. By proving the feasibility of the coil design through successful rat whole-body imaging, the study provides evidence supporting its potential as a viable option for high-field MRI applications on rodents.

Coupled stack-up volume RF coils for low-field open MR imaging.

Low-field open magnetic resonance imaging (MRI) systems, typically operating at magnetic field strengths below 1 Tesla, has greatly expanded the accessibility of MRI technology to meet a wide range of patient needs. However, the inherent challenges of low-field MRI, such as limited signal-to-noise ratios and limited availability of dedicated radiofrequency (RF) coils, have prompted the need for innovative coil designs that can improve imaging quality and diagnostic capabilities. In response to these challenges, we introduce the coupled stack-up volume coil, a novel RF coil design that addresses the shortcomings of conventional birdcage in the context of low-field open MRI. The proposed coupled stack-up volume coil design utilizes a unique architecture that optimizes both transmit/receive efficiency and RF field homogeneity and offers the advantage of a simple design and construction, making it a practical and feasible solution for low-field MRI applications. This paper presents a comprehensive exploration of the theoretical framework, design considerations, and experimental validation of this innovative coil design. We demonstrate the superior performance of the coupled stack-up volume coil in achieving 47.7% higher transmit/receive efficiency and 68% more uniform magnetic field distribution compared to traditional birdcage coils in electromagnetic simulations. Bench tests results show that the B1 field efficiency of coupled stack-up volume coil is 57.3% higher compared with that of conventional birdcage coil. The proposed coupled stack-up volume coil outperforms the conventional birdcage coil in terms of B1 efficiency, imaging coverage, and low-frequency operation capability. This design provides a robust and simple solution to low-field MR RF coil design.

Addressing EMI and EMF Challenges in EV Wireless Charging with the Alternating Voltage Phase Coil

Wireless charging technologies are widely used in electric vehicles (EVs) due to their advantages of convenience and safety. Conventional wireless charging systems often use planar circular or square spiral windings, which tend to produce strong electric fields (E-fields), leading to electromagnetic interference (EMI) and potential health risks. These standard coil configurations, while efficient in energy transfer, often fail to address the critical balance between E-field emission reduction and power transfer effectiveness. This study presents an “Alternating Voltage Phase Coil” (AVPC), an innovative coil design that can address these limitations. The AVPC retains the standard dimensions of traditional square coils (400 mm in length and width, with a 2.5 mm wire diameter and 22 turns), but introduces a novel current flow pattern called Sequential Inversion Winding (SIW). This configuration of the winding significantly reduces E-field emissions by altering the sequence of current through its loops. Rigorous simulations and experimental evaluations have demonstrated the AVPC’s ability to lower E-field emissions by effectively up to 85% while maintaining charging power. Meeting stringent regulatory standards, this advancement in the proposed coil design method provides a way for WPT systems to meet stringent regulatory standards requirements while maintaining transmission capability.

Comparison of adaptive imaging receiver coil and traditional coil for multiplexed sensitivity encoding diffusion-weighted imaging of the liver.

To compare the image quality and efficacy of the adaptive imaging receiver (AIR) coil (GE Healthcare) and the traditional coil for multiplexed sensitivity encoding diffusion-weighted imaging (MUSE-DWI) in the detection of focal liver lesions (FLLs). Two groups of MUSE-DWI were obtained. Image quality was qualitatively evaluated by 3 independent blinded radiologists on a 5-point scale, and quantitative parameters were calculated by measurements of the region of interest in the liver and FLLs. McNemar's test were used to compare the characteristics and detectability. Less image noise, sharper contours, milder susceptibility artefacts, and better liver lesion conspicuity were found by all radiologists in 60 livers with 140 FLLs with the AIR coil than with the traditional coil (reader average mean, 4.3-4.4 vs. 3.7-4.0, P < .001). The signal-to-noise ratio (SNR) of the liver was significantly higher with the AIR coil than with the traditional coil (right lobe: mean, 8.89 vs.7.76, P < .05; left lobe: mean, 7.14 vs.6.19, P < .001), and the SNR of FLLs (mean, 24.62 vs. 21.01, P < .001) and lesion-to-liver CNR (mean, 16.61 vs. 14.02, P < .001) exhibited significant differences between the AIR coil and the traditional coil. Besides, superior detection of FLLs was observed with the AIR coil compared to the traditional coil (95.7% [134/140] vs. 85.7% [120/140], P < .001). The AIR coil yields less noise, fewer distortions, better lesion detectability, higher SNR of the liver and FLLs, and improved lesion-to-liver CNR during liver MUSE-DWI. Thus, it is a feasible and effective scanning scheme in liver MRI. The AIR coil improves SNR and the quality of liver MR imaging compared with the traditional coil.

Primate eye tracking with carbon-nanotube-paper-composite based capacitive sensors and machine learning algorithms

BackgroundAccurate real-time eye tracking is crucial in oculomotor system research. While the scleral search coil system is the gold standard, its implantation procedure and bulkiness pose challenges. Camera-based systems are affected by ambient lighting and require high computational and electric power. New MethodThis study presents a novel eye tracker using proximity capacitive sensors made of carbon-nanotube-paper-composite (CPC). These sensors detect femtofarad-level capacitance changes caused by primate corneal movement during horizontal and vertical eye rotations. Data processing and machine learning algorithms are evaluated to enhance the accuracy of gaze angle prediction. ResultsThe system performance is benchmarked against the scleral coil during smooth pursuits, saccades tracking, and fixations. The eye tracker demonstrates up to 0.97 correlation with the coil in eye tracking and is capable of estimating gaze angle with a median absolute error as low as 0.30°. ComparisonThe capacitive eye tracker demonstrates good consistency and accuracy in comparison to the gold-standard scleral search coil method. ConclusionsThis lightweight, non-invasive capacitive eye tracker offers potential as an alternative to traditional coil and camera-based systems in oculomotor research and vision science.

Exploring efficiency in next generation high temperature superconducting-enhanced applied field magnetoplasmadynamic thrusters: A combined numerical and experimental study

The integration of superconductors into space propulsion has emerged as a promising avenue. Superconductors have demonstrated significant effectiveness in space propulsion devices in terms of performance. This study introduces a low-power High-Temperature superconducting Applied Field MPD thruster, utilizing High-Temperature superconductors to propel plasma out of the thruster to generate thrust. Replacing traditional copper magnets with High-Temperature superconducting magnets has not only led to substantial improvements but has also addressed challenges such as the increased weight of traditional copper coils, the energy-intensive nature of copper magnets consuming high power, and the extremely low temperatures required by conventional superconductors, necessitating the use of helium cooling tanks, which can add to the overall weight of the thruster.The research combines numerical simulations with detailed experimental validation to evaluate performance. As predicted by the simulation model, experimental results demonstrate a thrust of 220 mN at 15 mg/s and 15.2 kW, and 180 mN at 5 mg/s and 14.8 kW, with a specific impulse of 2760s, while maintaining a discharge current of 200 A. Additionally, the discharge voltage in the experimental setup increases with magnetic field strength but decreases with mass flow rate. Plasma fall voltage also increases with both the applied magnet field strength set by the High-Temperature superconducting magnet and the mass flow rate. Meanwhile, the fractional electrode fall voltage decreases with the applied field. Discharge voltage, plasma fall voltage, and electrode fall voltage are analyzed as factors influencing the increase or decrease in thrust, specific impulse, and efficiency of the High-Temperature superconducting-enhanced Applied Field Magnetoplasmadynamic thruster.Furthermore, the study concludes with a comprehensive examination of the High-Temperature superconducting-enhanced Applied Field Magnetoplasmadynamic thruster, offering valuable insights for researchers. Notably, the achieved efficiencies for Applied field Magnetoplasmadynamic thruster at low input power surpass those of the same configuration with traditional copper magnet, highlighting the potential benefits of utilizing High Temperature superconducting magnets for enhanced performance.

A Bionic Flapping Magnetic-Dipole Resonator for ELF Cross-Medium Communication.

Extremely low-frequency (ELF) electromagnetic (EM) waves adeptly propagate in harsh cross-medium environments, overcoming rapid decay that hinders high-frequency counterparts. Traditional antennas, however, encounter challenges concerning size, efficiency, and power. Here, drawing inspiration from nature, we present a groundbreaking piezo-actuated, bionic flapping-wing magnetic-dipole resonator (BFW-MDR), operating in the electro-mechano-magnetic coupling mechanism, designed for efficient ELF EM wave transmission. The unique rigid-flexible hybrid flapping-wing structure magnifies rotation angles of anti-phase magnetic dipoles by tenfold, leading to constructive superposition of emitted magnetic fields. Consequently, the BFW-MDR exhibits a remarkable quality factor of 288 and an enhanced magnetic field emission of 514 fT at 100 meters with only 6.9 mW power consumption, surpassing traditional coil antennas by three orders of magnitude. The communication rate is doubled by the ASK+PSK modulation method. Its robust performance in cross-medium communication, even amidst various interferences, underscores its potential as a highly efficient antenna for underwater and underground applications.

Extended curvature birdcage coil design for localized magnetic field in 9.4 T MRI for multiple mouse imaging

Magnetic resonance imaging (MRI) for preclinical analysis is useful for testing medical procedures, therapies, and drug development. Preclinical MRI uses small animals, such as mice, for multiple studies. Preclinical studies are often needed to control target mouse models with different parameters; thus, performing simultaneous MRIs is desired to reduce study time and provide a fair comparison. In this study, we propose a variation of a birdcage coil that is capable of providing the same field intensity for each mouse compared to a traditional birdcage coil configuration. The arrangement of the proposed birdcage coil produces a uniform and strongly localized magnetic |B1|-field in each of the four target mice. The design involves rotating the legs of the birdcage coil so that the current distribution produces a uniform field inside each mouse. Electromagnetic simulations were performed to validate the proposed design. The proposed design exhibited a better field intensity than the reference linear, circularly polarized mode birdcage coils and an eight-channel loop array coil. The proposed customized birdcage coil arrangement promises a better field intensity and uniformity across multiple mouse imaging using 9.4 T preclinical MRI scanners.

Piezo‐Turned Magnet Rotation for ELF/SLF Cross‐Medium Communication in Omni‐Direction

AbstractExtremely/super low frequency (ELF/SLF) electromagnetic (EM) waves offer efficient propagation in challenging cross‐medium environments. However, conventional coil antennas, when emitting ELF/SLF EM waves, face constraints related to size, radiation efficiency, and high power consumption. To overcome these limitations, a disc‐rod structured piezoelectric rotating resonator is proposed, which can turn a NdFeB permanent magnet disc into rotation with an impressive high‐speed up to 10 000 r min−1 via wobbling motion of the rod tip, effectively generating ELF/SLF magnetic field radiation via rotational oscillation other than common linear and swinging oscillation of the magnetic dipole moments. The piezo‐turned magnetic rotation (PTMR) method leads to a two to five‐fold enhancement in magnetic field emission compared to existing piezo‐actuated acoustic resonant antennas, and a 370 times higher emitting efficiency compared to the traditional coil antenna with a comparable size. In contrast to unidirectional EM wave radiation at their solely resonant frequencies, the PTMR antenna showcases omnidirectional B‐field radiation with continuous tunability in a dual frequency band spanning from 10 to 100 Hz. Moreover, an air–seawater cross‐medium magnetic field communication is successfully demonstrated. With outstanding performance metrics, the PTMR antenna emerges as a promising solution for efficient long‐distance ELF/SLF cross‐medium communication.

Design and measurement of three-dimensional uniform-field coils based on swarm intelligence algorithms under ferromagnetic boundaries

Combination systems of high permeability magnetic shields and coils are widely used in fields such as the magnetic field standard metrology and the zero magnetic room construction. To solve the problem that the magnetic field of uniform-field coils under the ferromagnetic boundary of magnetic shields is difficult to design precisely and the uniformity is difficult to improve, three-dimensional uniform field coils are designed based on the magnetic field model of coils under the ferromagnetic boundary using the target-field method (TFM), and the weight coefficient vectors determining the coils’ structure are optimized using intelligent optimization algorithms, which improves the uniformity of the magnetic field in the target region by 2 orders of magnitude through whale optimization algorithm (WOA). Then, the radial WOA-TFMUFY coil and the axial WOA-TFMUFZ coil are designed considering sidewall optical holes, and their magnetic field distribution is analyzed and verified under different permeabilities and axial opening sizes of the shield. Compared to the traditional saddle coil and Lee-whiting coil, the maximum magnetic field non-uniformity in the target uniform field region is reduced by 82.2 % and 92.8 % for the WOA-TFMUFY coil and WOA-TFMUFZ coil. The maximum relative errors between the measured magnetic field generated by the designed coils and the finite element method (FEM) simulation results are no higher than 2.2%. This novel method can provide more precise and uniform magnetic field metrology standard elements.

Numerical research of an internal and external-corrugated tube-in-tube helical coil heat exchanger

ABSTRACT To effectively enhance the heat transfer of a tube-in-tube helical coil heat exchanger, a novel internal and external-corrugated tube-in-tube helical coil was proposed by improving both the inner and outer tubes. The impact of the corrugation layout on the annular region’s heat transfer property was simulated. The effect of periodically distributed corrugations on flow patterns and the local Nusselt on the inner tube wall was explored. Furthermore, by comparing the fluid’s velocity and temperature field contour in traditional helical coil and novel helical coil, the enhanced heat transfer mechanism was discovered. Finally, the effects of Re, dimensionless depth H, and dimensionless pitch S of corrugations on the annular region’s heat transfer, flow resistance and entropy generation were analyzed. The results showed that annular region’s heat transfer could be improved due to the periodically distributed corrugations. The local Nu distribution on the corrugated inner tube wall was similar to that of ordinary inner tube, while changed periodically due to the continuous influence of corrugations. The number of Nu and f increased by 53% ~72% and 40% ~120% with the dimensionless corrugation depth and dimensionless pitch being 0.15 and 1.5, respectively. The comprehensive heat transfer performance PEC reached 1.2 ~ 1.6, and cross-arranged inner and outer tube corrugations were more favorable for heat transfer than the corresponding arrangement, when Re = 6000, H3 structure has the highest S t , S f and S gen , which are 0.934W/K, 0.379 W/K and 1.312W/K, respectively. Increasing H and decreasing S could enhance the Nu, f and entropy generation. The values of PEC decreased with increasing S, while with the increment of H, PEC increased and decreased, respectively when Re was in the range of (2000, 4000) and (4000, 6000). In the study range, changing H and S could increase Nu by 40.3%–97.3%, 31.7%–96.8%, and f by 11.7%–176.5%, 16.4%–180.9%, respectively. The final comprehensive heat transfer performance increased by 12.8%-65.9%. Finally, the prediction correlation formulas of Nu and f in NTTHC annular region with high correlation is proposed.

Design and characterisation of a cell exposure system with high magnetic field homogeneity: RILZ coils.

In vitro studies requiring controlled exposure to low-frequency electromagnetic fields employ exposure systems with different geometries and configurations, the Helmholtz configuration being one of the most widely used. This configuration has limitations in the homogeneity of the spatial distribution of the magnetic field intensity values. We present the design, manufacturing, and characterisation of a new coil system, called RILZ configuration, which improves the distribution of magnetic field intensity values in the three dimensions of space for three different heights in comparison with the traditional circular coils in Helmholtz configuration. In addition, a comparative study of the cellular response in CT2A cultures exposed to a magnetic field of 50 Hz and 100µT for 48hrs is performed with both exposure systems. The results of the study show reduced values of deviation from the central value of magnetic field intensity using the RILZ coil system. These differences are statistically significant compared to the Helmholtz configuration for the three Cartesian directions: x (p < 0.01), y (p < 0.01), z (p < 0.01). In addition, the intensity values for three different heights are statistically significantly correlated using the RILZ coil system (p < 0.01). The differences in cell behaviour are also statistically significant between the two systems (p < 0.01) and may be directly related to the differences found in the distribution of intensity values between the two systems. This study highlights the importance of the homogeneity of the magnetic field intensity generated by the exposure systems used and offers an effective solution to control the magnetic field exposure parameters in vitro assays.

Comparison of the Field Trapping Ability of MgB2 and Hybrid Disc-Shaped Layouts.

Superconductors have revolutionized magnet technology, surpassing the limitations of traditional coils and permanent magnets. This work experimentally investigates the field-trapping ability of a MgB2 disc at various temperatures and proposes new hybrid (MgB2-soft iron) configurations using a numerical approach based on the vector potential (A→) formulation. The experimental characterization consists in measurements of trapped magnetic flux density carried out using cryogenic Hall probes located at different radial positions over the MgB2 sample, after a field cooling (FC) process and the subsequent removal of the applied field. Measurements were performed also as a function of the distance from the disc surface. The numerical modelling of the superconductor required the evaluation of the critical current density dependence on the magnetic flux density (Jc(B)) obtained through an iterative procedure whose output were successfully validated by the comparison between experimental and computed data. The numerical model, upgraded to also describe the in-field behavior of ARMCO soft iron, was then employed to predict the field-trapping ability of hybrid layouts of different shapes. The most promising results were achieved by assuming a hollow superconducting disc filled with a ferromagnetic (FM) cylinder. With such a geometry, optimizing the radius of the FM cylinder while the external dimensions of the superconducting disc are kept unchanged, an improvement of more than 30% is predicted with respect to the full superconducting disc, assuming a working temperature of 20 K.

Variable augmentation network for invertible MR coil compression

To improve the efficiency of multi-coil data compression and recover the compressed image reversibly, increasing the possibility of applying the proposed method to medical scenarios. A deep learning algorithm is employed for MR coil compression in the presented work. The approach introduces a variable augmentation network for invertible coil compression (VAN-ICC). This network utilizes the inherent reversibility of normalizing flow-based models. The aim is to enhance the readability of the sentence and clearly convey the key components of the algorithm. By applying the variable augmentation technology to image/k-space variables from multi-coils, VAN-ICC trains the invertible network by finding an invertible and bijective function, which can map the original data to the compressed counterpart and vice versa. Experiments conducted on both fully-sampled and under-sampled data verified the effectiveness and flexibility of VAN-ICC. Quantitative and qualitative comparisons with traditional non-deep learning-based approaches demonstrated that VAN-ICC carries much higher compression effects. The proposed method trains the invertible network by finding an invertible and bijective function, which improves the defects of traditional coil compression method by utilizing inherent reversibility of normalizing flow-based models. In addition, the application of variable augmentation technology ensures the implementation of reversible networks. In short, VAN-ICC offered a competitive advantage over other traditional coil compression algorithms.

Systematic Review and Meta‐Analysis of Endovascular Therapy Effectiveness for Unruptured Saccular Intracranial Aneurysms

Background Currently, endovascular treatment of intracranial aneurysms is limited by low complete occlusion rates. The advent of novel endovascular technology has expanded the applicability of endovascular therapies; however, the superiority of novel embolic devices over the traditional Guglielmi detachable coils is still debated. We performed a systematic review of literature that reported the Raymond–Roy occlusion classification (RROC) rates of modern endovascular devices to determine their immediate and follow‐up occlusion effectivenesses for the treatment of unruptured saccular intracranial aneurysms. Methods A search was conducted using electronic databases (PUBMED, Cochrane, ClinicalTrials.gov, and Web of Science). We retrieved studies published between 2000 and 2022, reporting immediate and follow‐up RROC rates of subjects treated with different endovascular intracranial aneurysm therapies. We extracted demographic information of the treated patients and their reported angiographic RROC rates. Results A total of 80 studies from 15 countries were included for data extraction. The RROC rates determined from angiogram were obtained for 21 331 patients (72.5% women, pooled mean age: 58.2 [95% CI]: 56.8–59.6), harboring 22 791 aneurysms. The most frequent aneurysm locations were the internal carotid artery (46.4%, 95% CI: 41.9%–50.9%), the anterior communicating artery (26.4%, 95% CI: 22.5%–30.8%), the middle cerebral artery (24.5%, 95% CI: 19.2%–30.8%), and the basilar tip (14.4%, 95% CI: 11.3%–18.3%). The complete occlusion probability (RROC‐I) was analyzed for Guglielmi detachable coils, the Woven EndoBridge, and flow diverters. The RROC‐I rate was the highest in balloon‐assisted coiling (73.9%, 95% CI: 65.0%–81.2%) and the lowest in the Woven EndoBridge (27.8%, 95% CI: 13.2%–49.2%). The follow‐up RROC‐I probability was homogenous in all analyzed devices. Conclusion We observed that the coil‐based endovascular therapy provides acceptable rates of complete occlusion, and these rates are improved in balloon‐assisted coils. Out of the analyzed devices, the Woven EndoBridge exhibited the shortest time to achieve &gt;90% probability of follow‐up complete occlusion (∼18 months). Overall, the Guglielmi detachable coils remain the gold standard for endovascular treatment of unruptured saccular aneurysms.

Embolization of De Novo Pulmonary Arteriovenous Malformations Using High-Volume Detachable Non-Fibered Coils: Propensity-Matched Comparison to Traditional Coils

Embolization of de novo pulmonary arteriovenous malformations (PAVMs) using high-volume detachable non-fibered (HVDNF) coils was compared to traditional non-HVDNF coils. Persistent-occlusion rates were evaluated. A total of 272 de novo (previously untreated) PAVM treatments were retrospectively stratified into those treated with non-HVDNF coils only (n = 192) and those treated with HVDNF coils with or without other coils (n = 80). Propensity score matching, followed by survival analysis and cost analysis, was performed. The overall persistent-occlusion rate was 86.0% (234/272). Persistent occlusion was achieved in 81.8% of PAVMs using non-HVDNF coils, compared with 96.3% using HVDNF coils (p = 0.0017). The mean follow-up was 30.7 ± 31.9 months versus 14.7 ± 13.4 months, respectively (p &lt; 0.0001). Propensity-matched survival analysis demonstrated PAVMs treated with HVDNF coils recurred significantly less frequently than PAVMs treated with non-HVNDF coils (p = 0.023). The use of HVDNF coils was more expensive than standard coils, however not significantly different for the treatment of complex PAVMs. The use of high-volume detachable non-fibered coils was associated with higher persistent-occlusion rates when compared with non-HVDNF coils. HVDNF coils were more expensive on average; however, cost was similar between groups for the treatment of complex PAVMs.