Trace Amounts Of Rare Earth Elements Research Articles

Preparation of imprinted cryogels of cellulose cross-linked ionic liquids for selective separation of Gd(III) from rare earth leachate

The development of high technology has elevated industry’s dependence on rare earth resources. The hydrometallurgical process is widely used for the separation of rare earth elements (REEs) from rare earth ores, producing acidic leachate with trace amounts of REEs. Recovery of REEs from rare earth leachate not only mitigates the negative impact of leachate on the environment, but also contributes to the realization of sustainable resource utilization. In this study, two novel imprinted cryogel adsorbents, methyltrioctylammonium chloride-derivative carboxymethylated cellulose nanocrystal imprinted cryogel (LR-ICMC) and ethylmethylimidazolium bromide-derivative carboxymethylated cellulose nanocrystal imprinted cryogel (LM-ICMC), were constructed by using carboxymethylated modified cellulose nanocrystals as a backbone structure, and successfully branched ionic liquids (ILs) methyltrioctylammonium chloride-derivative and ethylmethylimidazolium bromide-derivative, respectively, for the separation of gadolinium ions (Gd(III)) from rare earth leachate. Firstly, SEM and TEM results showed that the incorporation of ILs retained part of the pore structure of carboxymethylated cellulose nanocrystals (CMCNCs). BET and TG results illustrated that the incorporation of ILs effectively increased the specific surface area and thermal stability of LR-ICMC and LM-ICMC. FT-IR and XPS results showed that LR-ICMC and LM-ICMC could adsorb Gd(III) by electrostatic and chelating effects. Secondly, adsorption isotherm experiments demonstrated the adsorption capacities of 66.880 mg/g and 75.895 mg/g for LR-ICMC and LM-ICMC, respectively; adsorption kinetic experiments demonstrated the ability of LR-ICMC and LM-ICMC to rapidly adsorb 85.152 % and 87.989 % of the maximum adsorption capacity, respectively, within the initial first 40 min. Finally, cycling experiments demonstrated the advantages of LR-ICMC and LM-ICMC in reuse, maintaining 89.245 % and 90.734 % of the original performance after five adsorption–desorption cycles, respectively. Based on these results, LR-ICMC and LM-ICMC were demonstrated to be highly efficient and reusable adsorbents for selective recovery of Gd(III) from rare earth leachate. This study deepens the application of ILs in solid-phase adsorbents and highlights the great potential of LR-ICMC and LM-ICMC in the field of REEs recovery.

Determination of Trace Amounts of Rare-Earth Elements in Clean Steel by Inductively Coupled Plasma Optical Emission Spectrometry after Removal of Iron Matrix with Anion-Exchange Resin

Inductively coupled plasma optical emission spectrometry (ICP-OES) was applied to the determination of trace rare-earth elements in clean steel. The steel sample was dissolved with a mixture of hydrochloric acid (HCl), nitric acid (HNO(3)), and hydrogen peroxide (H(2)O(2)), with the solution passing through a column packed with the anion-exchange resin DOWEX 1 x 8-200. Iron was absorbed selectively on the resin column, and the analytes of interest passed through the column and were effectively separated from the iron matrix. Conditions of separation were optimized. When the sample solution was spiked with 10 microg of the analytes of interest, the recoveries ranged from 88% to 102%, and relative standard deviations were between 6% and 21% (n = 6). The method was successfully applied to the determination of trace amounts of targeted elements in clean steel.

Effects of Trace Amounts of Rare Earth Additions on Microstructure and Properties of Sn-Bi-Based Solder Alloy

The effect of trace amounts of rare earth additions on the microstructure and properties were studied for the Sn-58Bi and Sn-58Bi-Ag solder alloys. At the same time, the intermetallic compounds (IMCs) in the solder alloys and intermetallic layer (IML) thickness at the solder/Cu substrate interface were investigated, both as-reflowed and after high-temperature aging. The results indicate that adding trace amounts of rare earth (RE) elements has little influence on the melting temperature and microhardness of the solders investigated, but adding RE elements improves the wettability and shear strength of the Sn-58Bi and Sn-58Bi-Ag solder alloys. In addition, it was found that the addition of RE elements not only refines the microstructure and size of the IMC particles, but also decreases the IML thickness and shear strength of the Sn-58Bi solder joint after high-temperature aging. Adding trace amounts of RE elements is superior to adding trace amounts of Ag for improving the properties of the Sn-58Bi solder. The reason may be related to the modification of the microstructure of the solder alloys due to the addition of trace amounts of RE elements.

Determination of trace amounts of rare-earth elements in highly pure neodymium oxide by sector field inductively coupled plasma mass spectrometry (ICP-SFMS) and high-performance liquid chromatography (HPLC) techniques

Recently rare-earth elements (REE) have received much attention in fields of geochemistry and industry. Rapid and accurate determinations of them are increasingly required as industrial demands expand. Sector field inductively coupled plasma mass spectrometry (ICP-SFMS) with high-performance liquid chromatography (HPLC) has been applied to the determination of REE. HR ICP-MS was used as an element-selective detector for HPLC in highly pure materials. The separation of REE with HPLC helped to avoid erroneous analytical results due to spectral interferences. Sixteen elements (Sc, Y and 14 lanthanides) were determined selectively with the HPLC/ICP-SFMS system using a concentration gradient methods. The detection limits with the HPLC/ICP-SFMS system were about 0.5–10pgmL−1. The percentage recovery ranged from 90% to 100% for different REE. The %RSD of the methods varying between 2.5% and 4.5% for a set of five (n=5) replicates was found for the IPEN's material and for the certificate reference sample. Determination of trace REEs in two highly pure neodymium oxides samples (IPEN and Johnson Matthey Company) were performed. In short, the IPEN's materials which are highly pure (>99.9%) were successfully analyzed without spectral interferences.

Determination of rare earth elements in chloroplasts of Brassia napus by INAA and biochemical separation techniques

Intact chloroplasts were isolated from mesophyll protoplasts of Brassia napus. Concentrations of 8 rare earth elements (REEs) in the chloroplasts were determined by instrumental neutron activation analysis (INAA). The results showed that there were trace amounts of REEs in the chloroplasts, which corresponded to 1 atom of REEs per 2000 chlorophyll molecules. About 30% of the total REEs in the leaves are localized in the chloroplasts and the light REEs were enriched with respect to the heavy elements of the series.

Determination of trace amounts of rare earth elements by neutron activation analysis after preconcentration using hydrated magnesium oxide

A preconcentration method of 13 rare earth elements (REES) was studied for neutron activation ananlysis (NAA). Hydrated magnesium oxide was used as the preconcentration agent to absorb the REES ions from aqueous solution onto the solid magnesium oxide, which was separated and analyzed. It was observed that the Langmuir equation for isothermal adsorption was well obeyed by the REES under the condition studied. The efficiency of the preconcentration process using hydrated magnesium oxide was critically examined for each of REE and for mixture of REES by preparing a known volume of solution containing known amount of trace REES. NAA was used to analyze REES recovered by the preconcentration process. It was found that the REES recoveries were satisfactory and the preconcentration process is reliable. There are several resort resort areas in Taiwan where local people are enjoying its hot spring water. It is generally believed that the hot spring water spa would bring about some sorts of therapeutic functions. The preconcentration method developed above, was applied to analyze the trace amounts of REES in hot spring wate in Taiwan.

Determination of rare-earth elements in USGS standard rocks by mixed-solvent ion exchange and mass-spectrometric isotope dilution

The development is described of a mixed-solvent ion-exchange technique for separating trace amounts of rare-earth elements from silicate rocks and minerals. A two-column method is used, bulk separation of rare earths from other elements being accomplished on the first, and separation into three groups for mass-spectrometric analysis on the second. This has been applied to the determination of nine REE (La, Ce, Nd, Sm, Eu, Gd, Dy, Er and Yb) in standard rock samples. Smooth variation of the chondrite-normalized abundance distributions and comparison with other published results indicate that the accuracy of the method, with the exception of La, is generally ± 2%.