Trabecular Metal Cones Research Articles

Uso de cone de metal trabecular tântalo para tratamento de defeitos ósseos na artroplastia de revisão do joelho

Objectivesthe aim of this study was to evaluate the surgical technique and determine the initial results, with a minimum follow‐up of two years, from total knee arthroplasty revisions in which trabecular metal cones made of tantalum were used at the Knee Surgery Center of the National Institute of Traumatology and Orthopedics (INTO) or at the authors’ private clinic between July 2008 and December 2010. Methodsten patients were included in the study prospectively, through clinical and radiographic evaluations. Resultsseven patients presented evolution without complications relating to the tantalum cones used. Five of these patients said that they did not have any pain and all of them were able to walk without needing crutches. In all the cases, we observed that osseointegration of the tantalum cones had occurred. No migration or loosening of the implants was observed, nor was osteolysis. Conclusionuse of trabecular metal cones made of tantalum for treating AORI type II or II bone defects was capable of providing efficient structural support to the prosthetic revision implants, in evaluations with a short follow‐up.

Tantalum cones for major osteolysis in revision knee replacement

We report the results of revision total knee replacement (TKR) in 26 patients with major metaphyseal osteolytic defects using 29 trabecular metal cones in conjunction with a rotating hinged total knee prosthesis. The osteolytic defects were types II and III (A or B) according to the Anderson Orthopaedic Research Institute (AORI) classification. The mean age of the patients was 72 years (62 to 84) and there were 15 men and 11 women. In this series patients had undergone a mean of 2.34 previous total knee arthroplasties. The main objective was to restore anatomy along with stability and function of the knee joint to allow immediate full weight-bearing and active knee movement. Outcomes were measured using Knee Society scores, Oxford knee scores, range of movement of the knee and serial radiographs. Patients were followed for a mean of 36 months (24 to 49). The mean Oxford knee clinical scores improved from 12.83 (10 to 15) to 35.20 (32 to 38) (p < 0.001) and mean American Knee Society scores improved from 33.24 (13 to 36) to 81.12 (78 to 86) (p < 0.001). No radiolucent lines suggestive of loosening were seen around the trabecular metal cones, and by one year all the radiographs showed good osteo-integration. There was no evidence of any collapse or implant migration. Our early results confirm the findings of others that trabecular metal cones offer a useful way of managing severe bone loss in revision TKR.

Treatment of Large Bone Defects With Trabecular Metal Cones in Revision Total Knee Arthroplasty

The early term results of 29 cases of revision total knee arthroplasty using highly porous trabecular metal cone implants for femoral and tibial major bone deficit reconstruction (Anderson Orthopedic Research Institute classification type 2B and 3) have been prospectively analyzed. Indications for revision surgery included: aseptic loosening/wear, staged reimplantation after infection, as well as periprosthetic fracture. At an average follow-up of 33 months (range, 13-73 months) the mean Knee Society Score and functional score statistically improved. Radiological follow-up revealed no evidence of loosening or migration of the constructs. No evidence of complications was noted in correlation with the use of trabecular metal cones. This study supports evidence that trabecular metal cones are an efficient and effective option for dealing with significant bone deficits and obtaining stable biological fixation in revision total knee arthroplasty.

Tantalum Cones in Revision Total Knee Arthroplasty. A Promising Short-Term Result With 29 Cones in 21 Patients

Twenty-nine porous tantalum metaphyseal cones were implanted in 21 patients (14 women and 7 men) during revision TKA. The average age at the time of the procedure was 73.3years. Sixteen revisions were considered aseptic and 5 were reimplantations after sepsis. Eight patients had stemmed revision implants and thirteen primary designs. According to the Anderson Orthopaedic Research Institute bone defect classification, femoral defects were rated as F3 in 14 knees and F2B in 3 knees. Tibial defects were rated as T2A in 3 cases, T2B in 3 cases and T3 in 5 cases. A femoral cone was inserted in 10 patients, a double cone (femur and tibia) in 8, and a single tibial cone in 3. A rotating hinge knee prosthesis (RHK, Zimmer) was inserted in 10 patients and a constrained condylar prosthesis (LCCK, Zimmer) in 11 patients. The diaphysis was cemented in 9 cases and, in 11 cases, just the metaphysis. At an average follow up of 36months only one reconstruction was removed due to persistent infection. All metaphyseal cones showed evidence of stable osseointegration. According to the Knee Society Score the results were rated as excellent in 12 cases, good in 5 cases, fair in 3 and poor in 1 case. In the short term, porous tantalum metaphyseal cones provided structural support for large femoral and tibial defects. They also provided the environment for bone graft osseointegration, repair of femoral fractures and effective interdigitation of cement mantle into the trabecular metal cone.

Revision Total Knee Arthroplasty With the Use of Trabecular Metal Cones: A Randomized Radiostereometric Analysis With 2 Years of Follow-Up

“Trabecular Metal Cone” (TM Cone) (Zimmer, Inc, Warsaw, Ind) for reconstruction of bone loss in the proximal tibia during revision total knee arthroplasty is now optional. Forty patients were randomized to receive revision total knee arthroplasty with or without TM Cone (No TM Cone). The Anderson Orthopaedic Research Institute bone loss classification and NexGen revision system were used. Radiostereometric analysis was performed with 24 months of follow-up. Maximum total point motion: stable migration was seen in the TM Cone group. No statistically significant difference was found. Segment motion analysis at 24 months showed the same net direction of rotation for the groups around the y-, z-axis and around the x-, y-axis for translation. Tibial revision implants with TM Cone result in an early stable situation with less irregular migration pattern than revision without TM Cone.

Bone mineral density changes of the proximal tibia after revision total knee arthroplasty. A randomised study with the use of porous tantalum metaphyseal cones

Forty patients were enrolled in a prospective randomised study using conventional method or "Trabecular Metal Cone" (TM Cone) (Zimmer inc., Warsaw, USA) for reconstruction of bone loss of the proximal tibia during revision total knee arthroplasty (rTKA). The aim was to evaluate changes in bone mineral density (BMD) at the proximal tibia. Thirty-six patients [median 67 years (range: 40-85 years)] received rTKA with NexGen® (Zimmer Warsaw, USA) revision system. Knee Society´s Knee Scoring System and the Anderson Orthopaedic Research Institute (AORI) bone classification was used. Changes in BMD were measured by dual energy X-ray absorptiometry (DEXA). Knee and function score improved in both groups. No significant changes between the groups were found. Changes in BMD within the two groups were quite similar. Overall decreases in BMD of 0.1 - 5.4 % were found in both groups (ROI 1-6) postoperative to 12 months of follow-up, except that ROI 7 showed an increase in BMD (0.8 - 1.3 %). After 24 months of follow-up, an increase in BMD was found along the stem (ROI 2-5) of 1.9 - 6.3 % , with significant changes in the TM Cone Group (ROI 3, 4, 5) . No significant changes in BMD between the groups were found. The bone remodelling pattern was almost the same in the two groups after two years.

Metaphyseal Fixation in Revision Total Knee Arthroplasty: Indications and Techniques

The need for revision total knee arthroplasty (TKA) is on the rise. Challenges to attaining durable, stable, well-functioning revision TKA include bony deficiency, periarticular osteopenia, deformity, and soft-tissue imbalance. Defect management often requires the use of stems, cement, metal augmentation, or allograft. Recently, there has been interest in obtaining fixation in the metaphyseal region in an attempt to improve construct stability while managing bony deficiency. Often, the metaphyseal bone is well vascularized, which provides an opportunity for additional fixation with cement, allograft, trabecular metal cones, or stepped porous-coated sleeves. Multiple series have documented good survivorship at short-term follow-up with trabecular metal cones and porous-coated sleeves. These newer technologies offer biologic fixation and are useful for treating bony defects that are not easily managed with other methods. Long-term studies are needed to determine the durability of these constructs. Concerns persist regarding stress shielding and difficulty of removal. Familiarity with the rationale and strategies for metaphyseal fixation in revision TKA is a valuable addition to the armamentarium of the revision surgeon.

Rebuilding the Skeleton, Stems, Metal Augments, and Discipline

Bony deficiencies are commonly encountered during revision total knee arthroplasty. Stems are used routinely to offload epiphyseal fixation, and both fully cemented and press-fit stems have demonstrated excellent survivorship in recent studies. Ease of removal, if needed, end of stem pain concerns, anatomic variability, and bone quality can influence stem-fixation method selection. Metal augments are available in various shapes and sizes to allow efficient management of epiphyseal defects and a modular approach to gap balancing. Larger defects can be managed with trabecular metal cones and metaphyseal filling sleeves, which have demonstrated encouraging results in recent studies. These newer implants are available in a variety of shapes and sizes and allow the efficient management of larger defects not handled easily by other methods.

Management of Bone Loss

Trabecular metal augmentation has added new treatment options for severe proximal tibial bone defects in revision knee arthroplasty. Porous tantalum tibial cones provide mechanical support for the tibial component and have the potential for long-term biologic fixation. These cones facilitate restoration of the proximal tibia metaphysis in Type 2 and 3 defects. Ten tantalum tibial cones were press-fit into the prepared cavitary defect of a series of revision knee arthroplasties. Voids between the cone and host bone were filled with morselized grafting material. The core tibial component was cemented into the implanted tibial cone; fixation was enhanced with stem extensions, which were press-fit in four knees and cemented in six knees. Extensions ranged from 75-200 mm with length dependent upon the residual bone quality. Offset stems were used in 3 tibias. At follow-up (average 10 months), radiographic evaluation revealed no evidence of loosening or change in position. Strength, range of motion, and stability were comparable to previously reported series of revision arthroplasties. Trabecular metal cones can help reconstruct large cavitary defects and, along with stem extensions and offset stems, may eliminate the need for extensive bone grafting or structural allograft in revision knee arthroplasty. Therapeutic study, level V (expert opinion). See the Guidelines for Authors for a complete description of levels of evidence.