Toxic Compounds Research Articles

Genomic and morphological characterization of Knufia obscura isolated from the Mars 2020 spacecraft assembly facility

Members of the family Trichomeriaceae, belonging to the Chaetothyriales order and the Ascomycota phylum, are known for their capability to inhabit hostile environments characterized by extreme temperatures, oligotrophic conditions, drought, or presence of toxic compounds. The genus Knufia encompasses many polyextremophilic species. In this report, the genomic and morphological features of the strain FJI-L2-BK-P2 presented, which was isolated from the Mars 2020 mission spacecraft assembly facility located at the Jet Propulsion Laboratory in Pasadena, California. The identification is based on sequence alignment for marker genes, multi-locus sequence analysis, and whole genome sequence phylogeny. The morphological features were studied using a diverse range of microscopic techniques (bright field, phase contrast, differential interference contrast and scanning electron microscopy). The phylogenetic marker genes of the strain FJI-L2-BK-P2 exhibited highest similarities with type strain of Knufia obscura (CBS 148926T) that was isolated from the gas tank of a car in Italy. To validate the species identity, whole genomes of both strains (FJI-L2-BK-P2 and CBS 148926T) were sequenced, annotated, and strain FJI-L2-BK-P2 was confirmed as K. obscura. The morphological analysis and description of the genomic characteristics of K. obscura FJI-L2-BK-P2 may contribute to refining the taxonomy of Knufia species. Key morphological features are reported in this K. obscura strain, resembling microsclerotia and chlamydospore-like propagules. These features known to be characteristic features in black fungi which could potentially facilitate their adaptation to harsh environments.

Persistence of PFOA Pollution at a PTFE Production Site and Occurrence of Replacement PFASs in English Freshwaters Revealed by Sentinel Species, the Eurasian Otter (Lutra lutra).

Concentrations of 33 PFASs were determined in 20 Eurasian otters, sampled 2015-2019, along a transect away from a factory, which used PFOA in PTFE manufacture. Despite cessation of usage in 2012, PFOA concentrations remained high near the factory (>298 μg/kg ww <20 km from factory) and declined with increasing distance (<57 μg/kg ww >150 km away). Long-chain legacy PFASs dominated the Σ33PFAS profile, particularly PFOS, PFOA, PFDA, and PFNA. Replacement compounds, PFECHS, F-53B, PFBSA, PFBS, PFHpA, and 8:2 FTS, were detected in ≥19 otters, this being the first report of PFBSA and PFECHS in the species. Concentrations of replacement PFASs were generally lower than legacy compounds (max: 70.3 μg/kg ww and 4,640 μg/kg ww, respectively). Our study underscores the utility of otters as sentinels for evaluating mitigation success and highlights the value of continued monitoring to provide insights into the longevity of spatial associations with historic sources. Lower concentrations of replacement, than legacy, PFASs likely reflect their lower bioaccumulation potential, and more recent introduction. Continued PFAS use will inevitably lead to increased environmental and human exposure if not controlled. Further research is needed on fate, toxicity, and bioaccumulation of replacement compounds.

Multi-Endpoint Acute Toxicity Assessment of Organic Compounds Using Large-Scale Machine Learning Modeling.

In recent years, alternative animal testing methods such as computational and machine learning approaches have become increasingly crucial for toxicity testing. However, the complexity and scarcity of available biomedical data challenge the development of predictive models. Combining nonlinear machine learning together with multicondition descriptors offers a solution for using data from various assays to create a robust model. This work applies multicondition descriptors (MCDs) to develop a QSTR (Quantitative Structure-Toxicity Relationship) model based on a large toxicity data set comprising more than 80,000 compounds and 59 different end points (122,572 data points). The prediction capabilities of developed single-task multi-end point machine learning models as well as a novel data analysis approach with the use of Convolutional Neural Networks (CNN) are discussed. The results show that using MCDs significantly improves the model and using them with CNN-1D yields the best result (R2train = 0.93, R2ext = 0.70). Several structural features showed a high level of contribution to the toxicity, including van der Waals surface area (VSA), number of nitrogen-containing fragments (nN+), presence of S-P fragments, ionization potential, and presence of C-N fragments. The developed models can be very useful tools to predict the toxicity of various compounds under different conditions, enabling quick toxicity assessment of new compounds.

Exposure to environmental pollutants selects for xenobiotic-degrading functions in the human gut microbiome

Environmental pollutants from different chemical families may reach the gut microbiome, where they can be metabolized and transformed. However, how our gut symbionts respond to the exposure to environmental pollution is still underexplored. In this observational, cohort study, we aim to investigate the influence of environmental pollution on the gut microbiome composition and potential activity by shotgun metagenomics. We select as a case study a population living in a highly polluted area in Campania region (Southern Italy), proposed as an ideal field for exposomic studies and we compare the fecal microbiome of 359 subjects living in areas with high, medium and low environmental pollution. We highlight changes in gut microbiome composition and functionality that were driven by pollution exposure. Subjects from highly polluted areas show higher blood concentrations of dioxin and heavy metals, as well as an increase in microbial genes related to degradation and/or resistance to these molecules. Here we demonstrate the dramatic effect that environmental xenobiotics have on gut microbial communities, shaping their composition and boosting the selection of strains with degrading capacity. The gut microbiome can be considered as a pivotal player in the environment-health interaction that may contribute to detoxifying toxic compounds and should be taken into account when developing risk assessment models. The study was registered at ClinicalTrials.gov with the identifier NCT05976126.

Application of Biosensors for the Detection of Mycotoxins for the Improvement of Food Safety.

Mycotoxins, secondary metabolites synthesized by various filamentous fungi genera such as Aspergillus, Penicillium, Fusarium, Claviceps, and Alternaria, are potent toxic compounds. Their production is contingent upon specific environmental conditions during fungal growth. Arising as byproducts of fungal metabolic processes, mycotoxins exhibit significant toxicity, posing risks of acute or chronic health complications. Recognized as highly hazardous food contaminants, mycotoxins present a pervasive threat throughout the agricultural and food processing continuum, from plant cultivation to post-harvest stages. The imperative to adhere to principles of good agricultural and industrial practice is underscored to mitigate the risk of mycotoxin contamination in food production. In the domain of food safety, the rapid and efficient detection of mycotoxins holds paramount significance. This paper delineates conventional and commercial methodologies for mycotoxin detection in ensuring food safety, encompassing techniques like liquid chromatography, immunoassays, and test strips, with a significant emphasis on the role of electrochemiluminescence (ECL) biosensors, which are known for their high sensitivity and specificity. These are categorized into antibody-, and aptamer-based, as well as molecular imprinting methods. This paper examines the latest advancements in biosensors for mycotoxin testing, with a particular focus on their amplification strategies and operating mechanisms.

Temporal and Spatial Variation of Toxic Metal Concentrations in Cultivated Soil in Jiaxing, Zhejiang Province, China: Characteristics and Mechanisms.

The toxic metal (As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn) pollution in 250 agricultural soil samples representing the urban area of Jiaxing was studied to investigate the temporal and spatial variations. Compared to the early 1990s, the pollution level has increased. Industry and urbanization were the main factors causing toxic metal pollution on temporal variation, especially the use of feed containing toxic metals. The soil types and crop cultivation methods are the main factors causing toxic metal pollution on spatial variation. Although the single-factor pollution indices of all the toxic metals were within the safe limits, as per the National Soil Environmental Quality Standard (risk screening value), if the background values of soil elements in Jiaxing City are used as the standard, the pollution index of all the elements surveyed exceeds 1.0, reaching a level of mild pollution. The soil samples investigated were heavily contaminated with toxic metal compounds, and their levels increased over time. This situation poses potential ecological and health risks.

Toxic tasting: how capuchin monkeys avoid grasshoppers' chemical defenses.

Platyrrhines consume many species of arthropods in the order Orthoptera. Some species of orthopterans can produce chemical defenses that render them toxic or unpalatable and thus act as predator deterrents. These species include the stick grasshoppers (family Proscopiidae), which are widely distributed in the Caatinga biome in northeastern Brazil, which comprises part of the distribution of capuchin monkeys. Capuchin monkeys are omnivores and consume a wide variety of foods, including unpleasant-tasting, potentially toxic items, which they need to learn how to process. We describe the processing of stick grasshoppers (Stiphra sp.) by wild capuchin monkeys (Sapajus libidinosus) that live in Serra da Capivara National Park, Brazil, and compare how individuals of different age classes handle these potentially toxic food items. S. libidinosus predominantly avoided consuming the digestive tract, which contains toxic compounds, when feeding on stick grasshoppers. Immatures took longer than adults to process the stick grasshoppers, indicating that capuchins need to learn how to process the toxic digestive tract of these prey to avoid consuming it.

Thermoelectric Performance of Hybrid Inorganic/Organic Composites Based on PEDOT:PSS/Tin(II) Oxide.

PSS(poly(3,4-ethylenedioxylthiophene):poly(styrenesulfonate))-based composites often exhibit remarkable characteristics regarding high electrical conductivity and great processability, being a suitable candidate for thermoelectric (TE) applications. To increase its performance, PEDOT:PSS is commonly blended with scarce and toxic inorganic compounds based on Se, Te or Bi. In this work we propose the use of one p-type metal oxide semiconductor (MOs): tin(II) oxide (SnO), motivated by its abundance and low toxicity. Hybrid PEDOT:PSS/SnO composites were obtained by firstly blending Ethylene glycol (EG) with PEDOT:PSS and then by adding p-type SnO, previously synthesized by a chemical route. The mixture was deposited via spin-coating onto glass substrates. The Power Factor (PF) of the composites increased by a factor of 300 with the combined EG/SnO composition.

Determination of hydroxymethylfurfural and malondialdehyde amounts in various instant coffees commonly sold in Türkiye

Coffee is currently one of the most consumed non-alcoholic beverages around the world. Although many beneficial compounds are present in the composition of coffee, it should be taken into account that coffee products may contain some toxic substances. The aim of this study is to determine both 5-hydroxymethylfurfural (HMF) and malondialdehyde (MDA) levels of the most well-known coffee brands in Türkiye and to discuss the factors associated with the increase of these toxic compounds in coffee products. In this research, 30 instant coffee samples were obtained from common commercial markets in Istanbul, Türkiye. The amounts of HMF and MDA in these coffees were determined by high-performance liquid chromatography (HPLC). The amounts of HMF and MDA in the coffee samples ranged from 2.8 to 1595 mg/kg and from 17.5 µg to 212 µg/100 g, respectively. There was no significant relationship between the declared amount of added sugar and the analyzed amount of HMF. The amounts of both HMF and MDA, or either HMF or MDA were generally higher in coffee products with high non-dairy coffee creamer content (82–85 %). The present study provides remarkable findings about the quality of coffee products commonly sold in Türkiye.

Additive aluminum as a cause of induced immunoexcitoxicity resulting in neurodevelopmental and neurodegenerative disorders: A biochemical, pathophysiological, and pharmacological analysis.

Much has been learned about the neurotoxicity of aluminum over the past several decades in terms of its ability to disrupt cellular function, result in slow accumulation, and the difficulty of its removal from cells. Newer evidence suggests a central pathophysiological mechanism may be responsible for much of the toxicity of aluminum and aluminofluoride compounds on the brain and spinal cord. This mechanism involves activation of the brain's innate immune system, primarily the microglia, astrocytes, and macrophages, with a release of neurotoxic concentrations of excitotoxins and proinflammatory cytokines, chemokines, and immune mediators. Many studies suggest that excitotoxicity plays a significant role in the neurotoxic action of several metals, including aluminum. Recently, researchers have found that while most of the chronic pathology involved in the observed neurodegenerative effects of these metals are secondary to prolonged inflammation, it is the enhancement of excitotoxicity by the immune mediators that are responsible for most of the metal's toxicity. This enhancement occurs through a crosstalk between cytokines and glutamate-related mechanisms. The author coined the name immunoexcitotoxicity to describe this process. This paper reviews the evidence linking immunoexcitotoxicity to aluminum's neurotoxic effects and that a slow accumulation of aluminum may be the cause of neurodevelopmental defects as well as neurodegeneration in the adult.

Evaluation of feeding table optimizations in Pacific white shrimp nursery biofloc systems

A 45-day experiment was conducted to optimize feeding rates in the nursery phase of Pacific white shrimp reared in biofloc systems (BFT). Four treatments were evaluated in quadruplicate, according to the Van Wyk table: maximum feeding rate; minimum feeding rate; minimum feeding rate minus 10%; and maximum feeding rate plus 10%. Post-larvae (0.08 ± 0.00 g) were cultured at the density of 2,000 shrimp·m-3, and water quality, solids production, and productive performance were all monitored. No significant difference was observed in final mean weight (1.47 ± 0.17 g), productivity (2.34 ± 0.20 kg·m-3) and survival (85.29 ± 5.44%) among treatments, but feed conversion ratio was significantly lower in the minimum feeding rate and minimum feeding rate minus 10% treatments, indicating efficient feed conversion without compromising growth. These treatments also resulted in lower values of toxic nitrogen compounds and total suspended solids, suggesting a positive impact on water quality. Although these rates proved suitable, continuous adjustments are needed owing to variations in the BFT system. This study provides guidelines for optimizing feeding management in superintensive BFT nursery systems.

Thermal fixation technologies affect phenolic profile, ginkgolides, bilobalide, product quality, and ginkgolic acids in Ginkgo biloba leaf tea.

Ginkgo biloba leaves (GBLs) contain high phytoconstituents, but ginkgolic acids (GAs, the main toxic compound in GBLs) have limited its applications. Processing Ginkgo biloba dark tea (GBDT) using fixation technology could decrease the toxic compounds; retain flavonoids, ginkgolides, and bilobalide; and improve the product quality. For the first time, various thermal fixations (hot air fixation [HAF], iron pot fixation [IPF], and boiled water fixation [BWF]) followed by rolling, fermentation, and drying were applied to produce GBDT. A comprehensive analysis of the toxicants (GAs), main bioactive compounds (ginkgolides and bilobalide, flavonoids, antioxidants, and phenolic profiles), and product qualities (moisture content, reducing sugar [RS], free amino acids [FAAs], enzyme activity, color properties, antioxidant capacity, etc.) were evaluated. The results revealed that thermal fixations BWF and HAF significantly reduced the GA contents (41.1%-34.6%). Most terpene lactones showed significant differences in control, IPF, and HAF. The HAF had lower total flavonoid content (TFC) than BWF and IPF. The control group (unfixated) had the highest toxic components (GA), terpene trilactones, and TFC compared with various fixations. Adding different fixations to rolling, fermentation, and drying had various impacts on GBDT, and principal component analysis supported the results. Among four thermal fixations, HAF yielded the best results in RS, FAA, total phenolic content, and antioxidant activities, while IPF had the highest TFC. BWF had the lowest content for GA. In conclusion, HAF (6) was chosen as the best technique for producing GBDT since it preserved GBDT's bioactive components while lowering its toxic components.

Evaluation of Aflatoxins and Heavy Metals Exposure in the Local Feeds of Fish and Shrimp in Bangladesh.

This study aims to comprehensively assess the presence of aflatoxins, pervasive fungal toxins, and heavy metals (lead, chromium, cadmium) in the local feed of fish and shrimp. Forty-eight samples of the fish and shrimp feed were collected from the Dhaka and Sathkhira districts of Bangladesh respectively. Aflatoxins (B1, B2, G1, G2) were analyzed by high-performance liquid chromatography (HPLC) with fluorescence detector, and atomic absorption spectrophotometry (AAS) was used for the heavy metal detection after sample digestion. The standard analytical methods of the Association of Official Analytical Chemists were followed for analyzing the proximate composition of the feed samples. The findings revealed the high toxic concentration of total aflatoxins particularly in fish feed (196.25 μg/kg). Concurrently, varying concentrations of heavy metals, including lead (Pb) and chromium (Cr), were detected, with the highest levels found in shrimp feed at 3.324 and 174.6 mg/kg, respectively. In comparison, highest contamination of cadmium (Cd) was found in fish feed at 0.398 mg/kg. The outcomes are growing concerns regarding the quality of locally sourced feed and emphasizing the need for prompt corrective actions. Otherwise, neglecting this concern may lead to the possibility of both fish and, ultimately, humans who consume them being vulnerable to the absorption and accumulation of these assessed toxic compounds.

Carcinogenicity of dietary MelQx in the prostate, breast, colon, and liver cancers, and the inhibitory effects of some compounds on MelQx: a mini review

Heterocyclic amines (HCAs) are among the most common toxic compounds formed in food, particularly protein-rich foods when prepared at high temperatures for an extended period. To date, 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline (MeIQx) is considered one of the most abundant HCAs. However, only a few studies have been conducted on MeIQx, particularly on its carcinogenic potential, despite being labelled as Group 2B Carcinogens by the International Agency for Research on Cancer. MeIQx has been shown to contribute to various types of cancer such as prostate, breast, colon and liver cancers. In most cancers, the genotoxic metabolites of MeIQx induce cancer primarily through the formation of DNA-carcinogen adducts, although some studies show their association with oxidative damage. Nonetheless, the involvement of various enzymes such as Nacetyltransferase, sulfotransferases, and glutathione S-transferases equally plays a crucial role in determining whether this carcinogen undergoes bio-activation or detoxification. This review sought to highlight the most recent research on the carcinogenic effects of MeIQx in prostate, colon, breast, and liver cancers, and provide a list of some potential compounds that can inhibit MeIQx formation. Epidemiological studies exploring the association between MeIQx exposure and prostate, breast and colon cancers produced mixed results. However, most of the experimental studies demonstrated the carcinogenic role of MeIQX in prostate, breast, colon, and liver cancers in both in vitro and in vivo models. Further investigation on the effects of its consumption on human health is needed which may help in understanding and reducing its potential to cause cancer. The inhibitory properties of other natural compounds on this carcinogen should also be explored

Diesel Particulate Matter Permeation into Normal Human Skin and Intervention Using a Topical Ceramide Formulation

Introduction: Diesel particulate matter (DPM) emitted from diesel engines is a major source of air pollutants. DPM is composed of elemental carbon, which adsorbs organic compounds including toxic polycyclic aromatic hydrocarbons (PAHs). The skin, as well as airways, is directly exposed to DPM, and association of atopic dermatitis, psoriasis flares, and premature skin aging with air pollutant levels has been documented. In skin, the permeation of DPM and DPM-adsorbed compounds is primarily blocked by the epidermal permeability barrier deployed in the stratum corneum. Depending upon the integrity of this barrier, certain amounts of DPM and DPM-adsorbed compounds can permeate into the skin. However, this permeation into human skin has not been completely elucidated. Methods: We assessed the permeation of PAHs (adsorbed to DPM) into skin using ex vivo normal (barrier-competent) organ-cultured human skin after application of DPM. Two major PAHs, 2-methylnaphthalene and triphenylene, and a carcinogenic PAH, benzo(a)pyrene, all found in DPM, were measured in the epidermis and dermis using liquid chromatography electrospray ionization tandem mass spectrometry. In addition, we investigated whether a topical formulation can attenuate the permeation of DPM into skin. Results: 2-Methylnaphthalene, triphenylene, and benzo(a)pyrene were recovered from the epidermis. Although these PAHs were also detected in the dermis after DPM application, these PAH levels were significantly lower than those found in the epidermis. We also demonstrated that a topical formulation that has the ability to form more uniform membrane structures can significantly suppress the permeation of PAHs adsorbed to DPM into the skin. Conclusion: Toxic compounds adsorbed by DPM can permeate even barrier-competent skin. Hence, barrier-compromised skin, such as in atopic dermatitis, psoriasis, and xerosis, is even more vulnerable to air pollutants. A properly formulated topical mixture that forms certain membrane structures on the skin surface can effectively prevent permeation of exogenous substances, including DPM, into skin.

Synthesis and characterization of nitrogen-doped-MWCNT@cobalt oxide for nerve agent simulant detection

Organophosphorus nerve agents are toxic compounds that disrupt neuromuscular transmission by inhibiting the neurotransmitter enzyme, acetylcholinesterase, leading to rapid death. A hybrid composite was synthesized using a hydrothermal process for the early detection of dimethyl methyl phosphonate (DMMP), a simulant of the G-series nerve agent, sarin. Quartz crystal microbalance (QCM) and surface acoustic wave (SAW) sensors were used as detectors. Nitrogen-doped multiwalled carbon nanotubes (N-MWCNTs), cobalt oxide (Co3O4), and N-MWCNT@Co3O4 were compared to detect DMMP concentrations of 25–150 ppm. At 25 ppm, the differential frequencies (Δf) of the N-MWCNT, Co3O4, and N-MWCNT@Co3O4 sensors were 5.8, 2.3, and 99.5 Hz, respectively. The selectivity results revealed a preference for the DMMP rather than potential interference. The coefficients of determination (R2) of the N-MWCNT, Co3O4, and N-MWCNT@Co3O4 sensors for detecting 25–150 ppm DMMP were 0.983, 0.986, and 0.999, respectively. The response times of the N-MWCNT, Co3O4, and N-MWCNT@Co3O4 sensors for detecting 100 ppm DMMP were 25, 27, and 34 s, respectively, while the corresponding recovery times were 85, 105, and 181 s. The repeatability results revealed the reversible adsorption and desorption phenomena for the fixed DMMP concentration of 100 ppm. These unique findings show that synthesized materials can be used to detect organophosphorus nerve agents.

The complete catalog of antimicrobial resistance secondary active transporters in Clostridioides difficile: evolution and drug resistance perspective

Secondary active transporters shuttle substrates across eukaryotic and prokaryotic membranes, utilizing different electrochemical gradients. They are recognized as one of the antimicrobial efflux pumps among pathogens. While primary active transporters within the genome of C. difficile 630 have been completely cataloged, the systematical study of secondary active transporters remains incomplete. Here, we not only identify secondary active transporters but also disclose their evolution and role in drug resistance in C. difficile 630. Our analysis reveals that C. difficile 630 carries 147 secondary active transporters belonging to 27 (super)families. Notably, 50 (34%) of them potentially contribute to antimicrobial resistance (AMR). AMR-secondary active transporters are structurally classified into five (super)families: the p-aminobenzoyl-glutamate transporter (AbgT), drug/metabolite transporter (DMT) superfamily, major facilitator (MFS) superfamily, multidrug and toxic compound extrusion (MATE) family, and resistance-nodulation-division (RND) family. Surprisingly, complete RND genes found in C. difficile 630 are likely an evolutionary leftover from the common ancestor with the diderm. Through protein structure comparisons, we have potentially identified six novel AMR-secondary active transporters from DMT, MATE, and MFS (super)families. Pangenome analysis revealed that half of the AMR-secondary transporters are accessory genes, which indicates an important role in adaptive AMR function rather than innate physiological homeostasis. Gene expression profile firmly supports their ability to respond to a wide spectrum of antibiotics. Our findings highlight the evolution of AMR-secondary active transporters and their integral role in antibiotic responses. This marks AMR-secondary active transporters as interesting therapeutic targets to synergize with other antibiotic activity.

Cryo-EM structures elucidate the multiligand receptor nature of megalin

Megalin (low-density lipoprotein receptor-related protein 2) is a giant glycoprotein of about 600 kDa, mediating the endocytosis of more than 60 ligands, including those of proteins, peptides, and drug compounds [S. Goto, M. Hosojima, H. Kabasawa, A. Saito, Int. J. Biochem. Cell Biol. 157, 106393 (2023)]. It is expressed predominantly in renal proximal tubule epithelial cells, as well as in the brain, lungs, eyes, inner ear, thyroid gland, and placenta. Megalin is also known to mediate the endocytosis of toxic compounds, particularly those that cause renal and hearing disorders [Y. Hori et al., J. Am. Soc. Nephrol. 28, 1783-1791 (2017)]. Genetic megalin deficiency causes Donnai-Barrow syndrome/facio-oculo-acoustico-renal syndrome in humans. However, it is not known how megalin interacts with such a wide variety of ligands and plays pathological roles in various organs. In this study, we elucidated the dimeric architecture of megalin, purified from rat kidneys, using cryoelectron microscopy. The maps revealed the densities of endogenous ligands bound to various regions throughout the dimer, elucidating the multiligand receptor nature of megalin. We also determined the structure of megalin in complex with receptor-associated protein, a molecular chaperone for megalin. The results will facilitate further studies on the pathophysiology of megalin-dependent multiligand endocytic pathways in multiple organs and will also be useful for the development of megalin-targeted drugs for renal and hearing disorders, Alzheimer's disease [B. V. Zlokovic et al., Proc. Natl. Acad. Sci. U.S.A. 93, 4229-4234 (1996)], and other illnesses.

Performance of a Composite Inhibitor on Mild Steel in NaCl Solution: Imidazoline, Sodium Molybdate, and Sodium Dodecylbenzenesulfonate

Mild steel corrosion is a significant challenge in oil and gas exploitation. Inhibitors are frequently employed to minimize the corrosive impact on mild steel. Mixing corrosion inhibitors is an effective method in reducing the dosage of toxic compounds and expanding the potential applications of inhibitors in NaCl solutions. Herein, a mixed corrosion inhibitor composed of imidazoline (IM), sodium molybdate, and sodium dodecylbenzenesulfonate (SDBS) for mild steel in a 3.5 wt% NaCl solution are investigated by orthogonal experimental design and electrochemical measurement. The imidazoline compound was synthesized and identified using Fourier transform infrared (FTIR) spectroscopy. The inhibitory effect is improved by higher concentrations of sodium molybdate and is further enhanced with the addition of 10 mg/L of SDBS. The electrochemical impedance spectroscopy indicates that the combination of IM (100 mg/L), sodium molybdate (50 mg/L), and SDBS (100 mg/L) results in excellent performance with electrochemical impedance (1.8 kohm·cm2). The mild steel surfaces after electrochemical measurement were analyzed using scanning electron microscopy (SEM). The information can contribute to the development of corrosion inhibitors with high performance or to understand the influence of mixing inhibitors on corrosion processes of mild steels.

Microalgae: A promising strategy for aflatoxin control in poultry feeds

Aflatoxins are toxic compounds produced by certain molds, primarily Aspergillus species, which can contaminate crops such as grains and nuts. These toxins pose a significant health risk to animals and humans. Aflatoxin B1 (AFB1) is the most potent of these compounds and has been well-characterized to lead to diminished growth and feed efficiency by disrupting nutrient absorption and metabolism in poultry. AFB1 can trigger apoptosis and inflammation, leading to a decline in immune function and changes in blood biochemistry in poultry. Recently, there has been growing interest in using microalgae as a natural antioxidant to mitigate the effects of aflatoxins in poultry diets. Microalgae have strong antioxidant, antimicrobial, anti-apoptotic, and anti-inflammatory properties, and adding them to aflatoxin-contaminated poultry diets has been shown to improve growth and overall health. This review investigates the potential of microalgae, such as Spirulina platensis, Chlorella vulgaris, and Enteromorpha prolifera, to mitigate AFB1 contamination in poultry feeds. These microalgae contain substantial amounts of bioactive compounds, including polysaccharides, peptides, vitamins, and pigments, which possess antioxidant, antimicrobial, and detoxifying properties. Microalgae can bind to aflatoxins and prevent their absorption in the gastrointestinal tract of poultry. They can also enhance the immune system of poultry, making them more resilient to the toxic effects of AFB1. Based on the data collected, microalgae have shown promising results in combating AFB1 contamination in poultry feeds. They can bind to aflatoxins, boost the immune system, and improve feed quality. This review emphasizes the harmful effects of AFB1 on poultry and the promising role of microalgae in reducing these effects.