PurposePipelines are subject to pits, holes and cracks after staying in service for a while, especially in harsh environments. To repair the pipelines, composite materials are used, due to composite materials' low cost, high-corrosion resistance and easy handling. This study aims to investigate the reliability of the blister test for evaluating the bonding strength of multiwall carbon nanotube (MWCNT) on woven carbon-reinforced epoxy.Design/methodology/approach Flexural, hardness and Izod impact tests were used to evaluate MWCNT effect on the epoxy by adding different amounts, 0.2, 0.4, 0.6, 0.8 and 1 wt. %, of MWCNT, to be compared with pure epoxy.FindingsThe results showed that 0.8 wt.% gives the highest strength. The experimental results of 0.8 wt.% MWCNT reinforced carbon composite was compared with the finite element model under blister test, and the results showed high similarities.Originality/valueEvaluation of the reliability and the advantages of MWCNT considering the high aspect ratio and high tensile strength, which is more than 15 times compared to steel, MWCNT enhances the strength, stiffness and toughness of epoxy used as a matrix in repairing pipelines, which leads to an increase in the resistance of composite materials against oil internal pressure before delamination.