Total Water Content Research Articles

The influence of humus extract on the quality of raspberry (Rubus idaeus L.)

This paper analyzes the influence of foliar fertilizer based on humus extract on some of the elements central to the quality of the Polka raspberry variety in the area of the city of Bihać. The research was conducted in 2015 according to the control and treatment system. A foliar fertilizer based on humus extract was used for the treatment. A total of 12 quantitative and qualitative properties were analyzed: content of total sugars, reducing sugars, invert sugars, sucrose, water content, dry matter, total acidity, vitamin C, total phenols, total flavonoids, antioxidant capacity, and fruit mass. After the analyses were completed, it can be concluded that fruits of raspberry plants treated with humus extract have an almost identical value of total acidity (1.65%) as found in control. However, treatment with a humus extract slightly lowered the content of total phenols and vitamin C. Based on the results obtained, it was shown that the foliar fertilizer based on the humus extract did not have a positive effect on certain chemical and antioxidant properties of the raspberry fruit.

Physio-biochemical Behavior and Health Effects of Pepper Plants Subjected to Lead Stress and Their Responses to Remediating Agents as Microbial Activity and Phosphorus

This work assessed the alleviating effects of bacteria (Bacillus subtilis) and phosphorus as environmentally friendly materials on the cultivation of pepper plants in polluted soil with lead (Pb) in forms of PbSO4, and Pb(NO3)2 at rates of 0, 1000, 2000 and 3000 µg Pb/g soil. Pot experiments were conducted to study the growth parameters, some physiological factors, biochemical constituents, and yield attributes, as well as the tolerance index (TI), translocation factor (TF), bioconcentration factor (BCF), and health effects [daily intake of heavy metals (DIM), health risk index (HRI), and carcinogenic risk (CR)]. Increasing the Pb concentration of all Pb salt used in soil severely affected the plant vegetative growth parameters. In comparison with other Pb salt forms, Pb(NO3)2 salt had a strong inhibitory impact. Additionally, the photosynthetic pigments in leaves were negatively impacted by all Pb salt forms. The application of Pb in all salt forms led to changes in the leaf water deficit (LWD), osmotic pressure, and membrane integrity and decreased the total water content, relative water content (RWC), transpiration rate, and leaf succulence. Pollution with Pb salts considerably decreased the yield constituents and various chemical properties of pepper, more so in the presence of Pb nitrate than in the presence of Pb sulfate type. A comparison of the concentration of Pb presence of Pb nitrate was greatly increased than the Pb sulfate in the whole plants. The safe limit of 0.3 mg/kg was exceeded by the Pb concentration in pepper fruits (6.3 and 4.3 mg/kg) cultivated in Pb-contaminated soil [with Pb(NO3)2 and PbSO4, respectively]. Additionally, Pb sulfate had a greater detrimental effect on Pb uptake in several plant organs than other Pb salt forms. The TI of pepper plants treated with salt types was >60% with PbSO4 (75.6%), whereas it was <60% with Pb(NO3)2 (35.2%). The BCF values of pepper plants in the polluted Pb soils varied from 0.10 to 0.41, indicating a moderate accumulator plant. At every level of Pb contamination with all Pb salt types, the sequence of Pb TF values was as follows: roots (TFr) > shoots (TFsh) > fruits (TFf), with TF values < 1. When compared with TFr and TFsh, TFs for shoot to fruits (TFf) had the lowest values (range, 0.07–0.22). The DIM, HRI, and CR values of pepper plants revealed that the Pb of fruit of stressed pepper plants is within safe limits. In addition to reducing the detrimental effects of intolerable Pb levels (2000 and 3000 µg Pb/g soil) on the majority of the aforementioned characters, adding Bacillus bacteria as a bio-agent and phosphorus as a chemo-agent to Pb-polluted soils also stimulated growth, increased yield, controlled plant water relations, protected photosynthetic pigments, and sharply decreased the Pb accumulation in plant organs. The Bacillus bacteria application resulted in some superior characteristics, such as root length, leaf number, leaf length, leaf area, leaf area index, fresh biomass, dry biomass, photosynthetic pigments, quantity yield attributes, reduction Pb accumulation in all plant organs, TI, TFr, TFf, BCF, in health effects trials, whereas phosphorus application improved plant height, leaf width, RWC, LWD, osmotic pressure, total soluble solids, acidity, total carbohydrates, total protein, and TFsh.

Effects of Different Organic Fertilizer Substitutions for Chemical Nitrogen Fertilizer on Soil Fertility and Nitrogen Use Efficiency of Foxtail Millet

Conventional fertilizer management can destroy the structure of soil. Replacing chemical fertilizers with organic fertilizers can improve soil quality and nitrogen use efficiency. We aimed to study the effects of organic fertilizer substitutions for chemical nitrogen fertilizer on soil fertility and nitrogen use efficiency in order to clarify the effectiveness of the available nutrient management measures in improving soil quality and increasing foxtail millet yield. A field experiment was carried out over two consecutive years, and a total of six treatments were set up: no fertilizer (CK), chemical nitrogen fertilizer alone (N), the substitution of 25% of chemical nitrogen fertilizer with bio-organic fertilizer (N25A1), the substitution of 25% of chemical nitrogen fertilizer with fermented mealworm manure (N25B1), the substitution of 50% of chemical nitrogen fertilizer with bio-organic fertilizer (N50A2), and the substitution of 50% of chemical nitrogen fertilizer with fermented mealworm manure (N50B2). The results of this study show the following: (1) Compared with chemical nitrogen fertilizer, the substitution of organic fertilizer for nitrogen fertilizer reduced the bulk density and solid phase of the soil, and it increased the total porosity, water content, liquid phase, and gas phase of the soil. (2) Compared with nitrogen fertilizer, the use of an organic fertilizer increased the contents of nitrate nitrogen, ammonium nitrogen, and total nitrogen in the soil by 13.59~52.56%, 4.47~18.27%, and 4.40~12.09%, respectively. The content of alkaline nitrogen increased by 1.70~32.37%, and the contents of soil available potassium, available phosphorus, and organic matter also increased. (3) The activities of sucrase, urease, glutaminase, and asparaginase were improved by replacing chemical nitrogen fertilizer with organic fertilizer. The N25 treatments performed better than the N50 treatments, and fermented mealworm manure performed better than biological organic fertilizer. (4) A moderate application of organic fertilizer (N25) can increase the grain yield, ear weight, grain weight, and 1000-grain weight of foxtail millet, whereas excessive application of organic fertilizer (N50) can reduce foxtail millet yield. (5) Replacing chemical nitrogen fertilizer with organic fertilizer can improve the agronomic use efficiency, physiological efficiency, biased productivity, harvest index, and apparent use efficiency of nitrogen fertilizer. In this study, the substitution of 25% of chemical nitrogen fertilizer with fermented mealworm manure was the best combination for restoring crop productivity and soil quality.

Fruit Quality and Plant Productivity of A Cherry Tomato (Solanum lycopersicum var. cerasiforme) Grown under Different Irrigation Regimes during the Reproductive Phase

The impact of water deficit severity and the specific growth stages at which water stress is applied have been found to have significant implications for both tomato yield and fruit quality. Recent findings have highlighted the influence of water deficits during the reproductive phase on tomato fruit quality. This study aimed to assess the effects of deficit irrigation on tomato fruit quality and overall plant productivity. Cherry tomatoes (Solanum lycopersicum var. cerasiforme) were grown in a greenhouse from August to November 2022. Three distinct watering regimes were implemented: Daily watering (T1), watering every 3 days (T2) and watering every 7 days (T3), starting from the flowering stage and continuing through subsequent plant development stages. The mean soil metric potentials (SMP) were −4.9, −29.7 and −52.8 kPa for T1, T2 and T3, respectively. Various traits of fruit size, fruit biomass, total soluble solids (TSS), water content, glucose content and lycopene content were measured. Additionally, the overall plant biomass and root-to-shoot ratio were evaluated. The results revealed that traits of the fruit size, such as diameter, length, volume and fresh weight, were most favorable when plants were subjected to the T2 watering regime, while higher and lower watering frequencies led to smaller fruit sizes. Interestingly, the TSS concentration had the most pronounced response to drought stress, indicating increased fruit sweetness. However, the fruit water content, glucose content and lycopene content remained unaffected by the different watering regimes. Furthermore, plants subjected to the T3 with the minimum SMP at −196.4 kPa exhibited enhanced development of the root system, prioritizing resource acquisition such as water and mineral nutrients over shoot components. In conclusion, this study provided valuable insights for agricultural practitioners, offering a range of alternatives that can inform optimal irrigation strategies that effectively enhance the quality of cherry tomato yields. HIGHLIGHTS Water deficits during the reproductive phase have a notable impact on tomato fruit quality Three distinct watering regimes, including daily watering (T1), watering every 3 days (T2) and watering every 7 days (T3), were implemented, with mean soil metric potentials for T1, T2 and T3 recorded at −4.9, −29.7 and −52.8 kPa, respectively T2 watering regime resulted in the most favorable fruit size (diameter, length, volume and fresh weight), while higher and lower watering frequencies led to smaller fruit sizes Total soluble solid concentration showed a pronounced response to drought stress, indicating increased fruit sweetness, while glucose content and lycopene content were unaffected by different watering regimes The study provides valuable insights for agricultural practitioners, suggesting alternative irrigation strategies to enhance the quality of cherry tomato yields GRAPHICAL ABSTRACT

A photometric-turbidimetric fusion sensor for measuring the water content in diesel with sensitivity increase by the extended infrared path capillary

Petroleum-based diesel is the main energy supply for heavy-duty vehicles and industrial equipment. Excessive water in the diesel would affect engine performance directly and even lead to serious accidents. In this paper, a new on-board compact sensor for detecting water content in diesel is proposed, which is composed of LED, photodetector, special metal waveguide capillary and ultrasonic cavity. Especially, the metal waveguide capillary with extended optical path can significantly improves the measurement accuracy meanwhile decrease the size. The small ultrasonic oscillation cavity is connected with the metal waveguide capillary to ensure the saturated water droplets to be evenly mixed with petroleum-based diesel before being detected. Then, the photometric - turbidimetric fusion method is proposed to measure the total water contents in different states (i.e., dissolved water, emulsified water and free water) in the diesel. The designed metal waveguide capillary with extended optical path improves sensor accuracy by the way of multiple reflections of light. In addition, the sensor is installed in the line between the fuel tank and the engine, then, the actual water pumped into the engine can be accurately measured. The experimental results show that the root mean square of the prediction error (RMSEP) is only 7.34 ppm, which is much lower than the optical sensor based on non-dispersive infrared spectroscopy of 18.6 ppm. The sensor fabricated in this paper finds application in detecting water content in diesel, which has the advantages of high sensitivity, small volume, and are suitable for on-board detection.

Note on volume and distribution of fresh water in the Amazon River plume under low discharge conditions

In this research communication, we report the results of a field survey conducted in a part of the plume of the Amazon River between 0° and 5°N and offshore of the 28 m isobaths in November of 2022, during the low river discharge season. By comparing the observed vertical salinity profiles ‘disturbed’ by continental discharges within the plume with the virtually ‘undisturbed’ ones outside the plume, we estimated the total content of fresh water in the area covered by the measurements as 203 ± 22 km3, which equals to less than 3% of the average annual Amazon River discharge. Furthermore, we argue that the river-borne continental water was not confined to the upper mixed layer and show that about 37%, or 76 km3, of its volume was entrained into the plume-underlying layer between the mixed layer and the salinity maximum. This point is additionally supported by analysis of chromophoric dissolved organic matter (CDOM) fluorescence in water samples, demonstrating significant concentrations of terrigenous CDOM to depths up to 140 m. We also observed that there was a significant direct correlation between the volume of freshwater accumulated in the affected layer and background stratification (expressed as buoyancy frequency) in the unaffected layer below it.

Characteristics of Fruit Leather Made from Jackfruit (Artocarpus heterophyllus) with the Addition of Gracilaria sp. Agar Flour

Fruit leather is a food modification of semi-wet or dry processed fruit products in the form of thin sheets. Agar flour from seaweed Gracilaria sp. Can be used to improve the texture of fruit leather so that it is easy to consume. The aim of this research was to determine the role of agar powder from Gracilaria sp. in improving the texture of fruit leather and the influence on consumer preference value. The research method used is experimental laboratories. Making fruit leather using jackfruit then adding agar flour from Gracilaria sp. using control concentrations, 0.5%, 1%, 1.5%, and 2%. Testing of jackfruit fruit leather includes total sugar, water content, pH, ash content, texture and hedonic test. The results showed that the addition of Gracilaria sp agar powder had significant effect on all fruit leather parameters. The addition of 0.5% Gracilaria sp agar flour produced the best fruit leather.

Warming affects leaf light use efficiency and functional traits in alpine plants: evidence from a 4-year in-situ field experiment.

Light use efficiency (LUE) is a crucial determinant of plant productivity, while leaf functional traits directly affect ecosystem functions. However, it remains unclear how climate warming affects LUE and leaf functional traits of dominant species in alpine meadows. We conducted a 4-year in-situ field warming experiment to investigate the eco-physiological characteristics for a dominant species (Elymus nutans) and a common species (Potentilla anserina) on the Tibetan Plateau. The leaf traits, photosynthesis and fluorescence characteristics were measured, along with the soil physical-chemical properties associated with the two species. Experimental warming increased the leaf LUE, maximum photochemical efficiency, non-photochemical quenching, relative water content and specific leaf area for both species. However, there was a decrease in leaf and soil element content. Different species exhibit varying adaptability to warming. Increasing temperature significantly increased the photosynthetic rate, stomatal conductance, transpiration rate, total water content, and specific leaf volume of E. nutans; however, all these traits exhibited an opposite trend in P. anserina. Warming has a direct negative impact on leaf LUE and an indirectly enhances LUE through its effects on leaf traits. The impact of warming on plant photosynthetic capacity is primarily mediated by soil nutrients and leaf traits. These results indicate that the two different species employ distinct adaptive strategies in response to climate change, which are related to their species-specific variations. Such changes can confer an adaptive advantage for plant to cope with environmental change and potentially lead to alterations to ecosystem structure and functioning.

Investigating soil quality in cold highland agricultural fields with different soil types

ABSTRACT To evaluate the soil quality of alpine farmland and elucidate the key factors influencing productivity levels under the current agricultural paradigm, we conducted an extensive collection of soil samples. In total, 234 soil samples (0–20 cm) were collected from Menyuan County, the heartland of the southern slope of the Qilian Mountains. These samples represented four predominant soil types, including cold calcic soil, luvic chernozem, calcareous meadow soil, and calcareous gray cinnamon soil. Moreover, by employing principal component analysis, we established a minimum data set (MDS) that encapsulated the essential parameters for the comprehensive evaluation of the soil quality of farmland in the study area. Upon evaluating the soil quality index, the rankings were as follows: luvic chernozem (0.63) > calcareous gray cinnamon soil (0.58) > calcareous meadow soil (0.58) > cold calcic soil (0.55). Overall, the results highlighted that the significant impact of soil total nitrogen (TN), available potassium (AK), and soil water content (SWC) on soil quality within the study area. Therefore, in the context of land management practices, careful attention should be paid to the management of soil TN, AK content, and SWC to avoid the degradation of cultivated land into abandoned fields.

An effective medium theory-based unified model for estimating thermal conductivity of unfrozen and frozen soils

Soil thermal conductivity (STC) is a crucial parameter in modeling land surface processes. However, the current STC models are developed separately for unfrozen and frozen soils, leading to inconsistent understanding. In this study, we propose a unified model based on the work of Ghanbarian and Daigle (2016) originally developed for unfrozen soils. The unified model comprises three parameters: critical volume fraction (ϕc), scaling exponent (t), and a compensating factor (α), and considers dry soil as the low-conductivity component (weighted by air volume fraction) and saturated soil as the high-conductivity component (weighted by volumetric liquid content for unfrozen state and total water content for frozen state). Specifically, ϕc represents a critical point where high-conductivity component begins to govern the behavior of effective STC, characterized by t. α allows for accurate calibration of saturated STC. Using a dataset of 90 unfrozen samples (693 measurements) and 74 frozen samples (255 measurements), pedotransfer functions (PTFs) for the three parameters were trained. The unified model successfully reproduces the sharp rise in STC at low moisture conditions during wetting and the increase during freezing. Compared to an empirical model (Côté and Konrad, 2005a) and a theoretical model (Tian et al., 2016), the unified model demonstrates higher predictive skill for unfrozen and frozen soils, achieving Nash-Sutcliffe efficiency coefficients of 0.96 and 0.90, respectively. This work contributes to a more consistent and comprehensive understanding of STC in cold environments and has the potential to be integrated into land surface models.

Estimation of in vivo body composition of Iberian pigs using bioelectric impedance and ultrasonography techniques

Iberian pigs are renowned for their high-quality products and distinctive characteristics, including high fat accumulation, low protein deposition rate, and a long productive cycle. The study aimed to assess in vivo body composition of purebred Iberian pigs using bioimpedance analysis (BIA) and ultrasonography. Accurate estimation of body composition in live animals is crucial for adopting decisions at the farm level. The experiment involved three groups of pure male Iberian pigs differing in body weight (BW; 60, 80 and 100 kg) with the same nutritional management. Body measurements, BIA and back fat and loin thickness (measured by ultrasonography) were obtained before slaughter. After slaughter pig carcasses were chemically analysed. A strong correlation between BIA measurements, specifically resistance (Rs) values, and body chemical parameters (total protein, lipids, ash, and water contents; p < 0.001 for all) was found. Reactance values (Xc), however, did not exhibit significant correlations. Regression analyses were conducted to predict carcass composition based on BIA measurements, BW, ultrasonography and linear corporal measurements. The prediction models achieved high R2 values for lipids, protein, total ash, water, and lean tissue (0.957, 0.968, 0.936, 0.961 and 0.976, respectively, p < 0.001 for all), indicating strong predictive power. These findings demonstrate the potential of non-invasive techniques such as BIA for estimating body chemical composition and quality of pig carcasses. However, it is important to acknowledge that the prediction models developed may not be applicable to other pig populations, as they were based on a specific sample of pigs.

Malnutrition as an unfavorable prognostic factor after surgical treatment for metastatic colorectal cancer.

&lt;b&gt;&lt;br&gt;Introduction:&lt;/b&gt; Colorectal cancer (CRC) is the second-leading cause of cancer-related deaths worldwide. Distant metastases are usually located in the liver and are present in 50% of patients.&lt;/br&gt; &lt;b&gt;&lt;br&gt;Aim:&lt;/b&gt; The aim of this study is to evaluate changes in body composition and phase angle before and after surgical treatment of CRC liver metastases, as well as survival time and treatment costs.&lt;/br&gt; &lt;b&gt;&lt;br&gt;Material and methods:&lt;/b&gt; The study included 134 patients who received 174 surgeries for CRC liver metastases. Bioelectrical impedance analysis (BIA) was performed using an AKERN BIA 101 analyzer.&lt;/br&gt; &lt;b&gt;&lt;br&gt;Results:&lt;/b&gt; BIA was performed before and after surgery. The results of tests (total body water content [TBW], body cell mass [BCM], and phase angle) showed a reduction in BCM by 2.21 kg and a statistically significant decrease in phase angle values after surgery (from 5.06 to 4.25 in women and from 5.34 to 4.76 in men). These values are below the reference range for both sexes. There was a correlation between phase angle values and muscle mass, both before (R = 0.528, p&lt;0001) and after surgery (R = 0.634, p&lt;000.1). Preoperative levels of the tumor marker CEA were elevated in more than half of the patients. The median survival time after resection of liver metastases was 37.6 months.&lt;/br&gt; &lt;b&gt;&lt;br&gt;Discussion:&lt;/b&gt; A significant factor that increases complications, mortality, and treatment costs of cancer patients is malnutrition, which could be the earliest symptom of malignant disease.&lt;/br&gt; &lt;b&gt;&lt;br&gt;Conclusions:&lt;/b&gt; Successful treatment of CRC requires the patients to participate in follow-up examinations and to be aware of early signs associated with recurrence (e.g., blood in the stool or weight loss). The patients' nutritional status should be monitored and recorded in a DILO card.&lt;/br&gt.

Fluids and body composition during anesthesia in children and adolescents: A pilot study

The purpose of this study is to evaluate the intracellular and extracellular volume before and after anesthesia in order to ascertain their variations and determine the potential utility of this information in optimizing intraoperative fluid administration practices. A bioimpedance spectroscopy device (body composition monitor, BCM) was used to measure total body fluid volume, extracellular volume, and intracellular volume. BCM measurements were performed before and after general anesthesia in unselected healthy children and adolescents visiting the Pediatric Institute of Southern Switzerland for low-risk surgical procedures hydrated with an isotonic solution. In 100 children and adolescents aged 7.0 (4.8–11) years (median and interquartile range), the average total body water increased perioperatively with a delta value of 182 (0–383) mL/m2 from pre- to postoperatively, as well as the extracellular water content, which had a similar increase with a delta value of 169 (19–307) mL/m2. The changes in total body water and extracellular water content significantly correlated with the amount of fluids administered. The intracellular water content did not significantly change. Conclusion: Intraoperative administration of isotonic solutions results in a significant fluid accumulation in low-risk schoolchildren during general anesthesia. The results suggest that children without major health problems undergoing short procedures do not need any perioperative intravenous fluid therapy, because they are allowed to take clear fluids up to 1 h prior anesthesia. In future studies, the use of BCM measurements has the potential to be valuable in guiding intraoperative fluid therapy.What is Known:• Most children who undergo common surgical interventions or investigations requiring anesthesia are nowadays hydrated at a rate of 1700 mL/m2/day with an isotonic solution.• The use bioimpedance spectroscopy for the assessment of fluid status in healthy children has already been successfully validated.• The bioimpedance spectroscopy is already currently widely used in various nephrological settings to calculate fluid overload and determine patient’s optimal fluid status.What is New:• Routine intraoperative fluid administration results in a significant fluid accumulation during general anesthesia in low-risk surgical procedures.• This observation might be relevant for children and adolescents with conditions predisposing to fluid retention.• In future studies, the use of BCM measurements has the potential to be valuable in guiding intraoperative fluid therapy.

A graph-based approach for modeling the soil–water retention curve of granular soils across the entire suction range

This study investigates experimentally the water retention behavior of granular soils from saturation to oven-dry state. The soil–water retention curve (SWRC) tests were conducted on a well-graded sand with clay using tensiometer and chilled-mirror hygrometer techniques. The soil samples were statically compacted at various water contents to different initial densities. The results showed that individual linear segments in the log–log graph could characterize the desorption process of capillary and adsorption water. A novel water retention model in a simple mathematical form was developed by conceptualizing the total water content as the sum of the suction-dependent capillary and adsorption components. The model parameters possess an unambiguous physical meaning. They can be easily calibrated based on the graphical properties of the test data using simple linear regression, which is a significant advantage over conventional SWRC models. The model was validated using the water retention data of the tested soil in this study and the available data of granular soils in the literature. The reproduced curves agree well with the experimental results. This study also analyzed the influence of compaction water content, initial density, and clay content on the capillary and adsorption components of the water retention curve. Additionally, the proposed framework provides a quick approximation method for the adsorption capacity, which plays an essential role in assessing the effective stress and the simulation of liquid film flow in unsaturated granular soils.

Textural evidence of fragmentation and densification processes in a fossilised shallow conduit on the flank of Nevados de Chillán Volcanic Complex

Eruptive style transitions are common in silicic volcanoes and an improved understanding of transitional controls is necessary for hazard forecasting. Examples of hybrid eruptions where both explosive and effusive eruptive behaviours occur simultaneously have led to a re-examination of models used to understand these complex and poorly understood processes. Exposed fossilised conduits record evidence of magmatic processes and provide the opportunity to examine structures and textures related to these transitions. Here we present a conceptual model of the evolution of a narrow (2.5 m wide) conduit located on the SW flank of the Nevados de Chillán Volcanic Complex, Chile. This conduit records evidence of fragmentation and densification processes through intercalated and juxtaposed banded, porous and dense domains. To understand how the products of each eruptive style relate and evolve during conduit formation, we combined qualitative textural analyses at different scales (outcrop, optical microscope and electron microscope), pore size and shape measurements using ImageJ, connected porosity measurements made using a helium pycnometer and total water content measurements using Fourier transform infrared spectroscopy. The results allow us to identify five principal phases of the conduit evolution: (I) an explosive phase where the conduit is filled with pyroclastic material, evidenced in the pyroclastic deposit preserved at the conduit wall, (II) a cyclic process of fragmentation and densification within the conduit that generates intercalation of the porous and dense domains, and leads to a hybrid explosive-effusive phase, (III) the formation of a dense magma plug that eventually seals the conduit and deforms vesicles and bands, (IV) the compaction of the pyroclastic domain due to the ascent of the plug, driving porosity reduction (to as little as 3% in the densest bands), with micro-folds and glassy fiamme, and (V) a final phase of post-sintering vesicle relaxation, yielding regular, mainly rounded, shapes. We compare our results with other exposed and examined conduits to propose a model of conduit evolution during small-volume, short-lived silicic eruptions.

Evaluation of AquaCrop’s Ability to Simulate Water Stress Based on 2-Year Case Study of Maize Crop

To apply AquaCrop to the study of agricultural soil moisture in the North China Plain, a water-treatment experiment on summer maize was carried out at the Fengqiu experimental station of the Chinese Academy of Sciences from 2017 to 2018. A water treatment was used to achieve field water capacities of 20 (W1), 40 (W2), and 60 (W3) cm soil layers under irrigation, and a rain-fed treatment (W0) was added. The model parameters were calibrated using the measured data in 2017. Then, they were applied to 2018 to verify the ability of the model to simulate water stress. The results showed that the variation trends for crop yield, canopy coverage, total soil water content, and the curve in the growth cycle simulated via AquaCrop were consistent with the actual observations; the results of a discrete analysis showed that the values of b (regression coefficient), R2 (determination coefficient), and EF (efficiency) were close to 1, and the values of the RMSE (root mean square error) were close to 0, which proved that the model could simulate dynamic changes in summer maize yield, canopy coverage, and total soil water content well. AquaCrop had good applicability in the North China Plain and could be applied to the study of agricultural water consumption and water-use efficiency in this area. The simulated values obtained can serve as an easily obtainable source of long-term experimental data in areas with frequent non-extreme weather events.

Influence of Unit Water Content Control on Concrete Performance in the Ready-Mixed Concrete Production Process.

This study examined the effects of increasing concrete unit water content and artificially controlling water content on concrete performance in the production process of ready-mixed concrete. Results showed that changes in the unit water content of 20 concrete mix proportions without air-entraining significantly reduced concrete compressive strength, increased porosity, and in-creased occurrence of bleeding. A unit water content increase of 25 kg/m3 or more may reduce the compressive strength of concrete below the design standard and significantly affect the occurrence of bleeding water. Moreover, an extra unit water content of at least 25 kg/m3 could significantly affect the diffusion of chloride ions in the concrete. The carbonation depth of concrete was extremely high with the increase in unit water content and water addition. In the production of concrete requiring at least normal strength or durability, the extra water change to total unit water content should be maintained at 15 kg/m3 or less. And a water-cement ratio of 48% or less and a unit water content of 155 kg/m3 or less are considered effective for management of concrete quality. Considering the aggregate type, absorption rate, and moisture state, the management of unit water content error in concrete production processes requires greater.

Study on the Quality Variation and Internal Mechanisms of Frozen Oatmeal Cooked Noodles during Freeze-Thaw Cycles.

Frozen staple food, attributed to its favorable taste and convenience, has a promising development potential in the future. Frequent freezing and thawing, however, will affect its quality. This study simulated several freeze-thaw cycles (FTC) that may occur during the cold chain process of frozen oatmeal cooked noodles (FOCN) production to consumption. The quality changes and their mechanisms were elucidated using methods such as differential scanning calorimetry (DSC), low-field nuclear magnetic resonance (LF-NMR), Fourier-transform infrared spectroscopy (FTIR), confocal laser scanning microscopy (CLSM), texture analysis, and sensory evaluation. The freezable water content of the FOCN decreased because of the FTC treatment, and the relative content of total water in FOCN also decreased accordingly. The increase in β-Turn after FTC induced disorder in the secondary structure of proteins, causing the protein microstructure to become loose and discontinuous, which in turn reduced the water-holding capacity of FOCN. Additionally, FTC reduced the chewiness and sensory score of FOCN. This research will contribute a theoretical foundation for optimizing the cold chain process.

Effects of Different Tillage Depths on Soil Physical Properties and the Growth and Yield of Tobacco in the Mountainous Chongqing Region of China

Tobacco (Nicotiana tabacum L.) is the most important cash crop in the mountainous Chongqing region, where mini rotary tillers are widely used for land preparation. The decline in tobacco yields has been partially attributed to deteriorating soil physical properties and the formation of plough pans as a result of the repeated use of the mini rotary tiller. The objective of this study was to evaluate the effects of different tillage depths on soil physical properties and the growth and yield of tobacco. Three tillage depths were evaluated: mini rotary tillage to 15 cm (T15) as a control, medium-deep tillage to 25 cm (T25), and deep tillage to 35 cm (T35). Total porosity, capillary porosity, and soil water content were measured for each treatment, and the root distribution, agronomical traits, and dry matter accumulation were monitored at different growing stages. Tobacco yield and output value were determined following the harvest. Compared to T15, T35 significantly increased total porosity and capillary porosity in the 10–40 cm soil layer and soil water content in the 0–40 cm soil layer, while T25 improved soil physical properties but not significantly. T35 significantly promoted dry matter accumulation and root, stem, and leaf growth compared to T15, while differences in some agronomic traits between T25 and T15 were not significant. Compared to T15, T35 and T25 increased the tobacco yield by 17.2–18.9% and 8.0–10.1%, respectively, and increased the output value by 44.4–46.4% and 29.2–32.6%, respectively. The results indicate that deep tillage improves soil physical properties, breaks plough pans, stimulates root growth, and increases tobacco yield and output value.

Changes in Germination Parameters, Growth and Development of Three Cultivars of Corn Seedlings under Various Aqueous Extracts of Mallow

Abstract: Allelopathy is related to the positive or negative impacts on one type of plant of a chemical produced by another type of plant, such as weeds, and different kinds of chemicals are hydroxamic acids, phenolics, and short-chain fatty acids. The potential allelopathic impacts of weeds are directly associated with the plant species used, as well as the concentration of the aqueous extract available in the environment. The present research has made an attempt to find and identify the allelopathic effects of aquatic extracts from dry seeds and shoots of mallow (Malva sylvestris L.) on germination, seedling growth, and progress of three cultivars of maize. Maize seeds (Zea mays L.) were obtained as seed material; three maize seed cultivars were KSC 704 (cultivar 1), KSC 500 (cultivar 2), and KSC 302 (cultivar 3), respectively. The aqueous ex-tracts of mallow shoots and seeds, in concentrations of 1, 3, and 5%, were made from the crum-bled and dried above-ground plant sections. The influence of plant dosage was significant on the coefficient of the rate of germination (CRG), seedling vigour index (SVI), total germination (T50), mean germination time (MGT), germination energy (GE), germination index (GI), inhibi-tion percentage (IP), fresh mass, dry mass, relative water content (RWC), and total water content (TWC). Different plant parts had a meaningful influence on SVI, GI, MGT, CRG, GE, and IP. The impacts of the cultivar on T50, IP, RWC, fresh mass, dry mass, and TWC were significant. Together with the increase in the concentration of allelopathic components, a decline in the ger-mination activity of all tested maize cultivars was found. The highest SVI was associated with control treatment, followed by 1% and 3% of plant dosages. KSC 704 obtained the maximum CRG and GE, and the minimum one was related to KSC 500. 3% of plant dosage has obtained the highest value of CRG and GE. The maximum and the minimum T50 were related to KSC 302 and KSC 704, respectively. The lowest values of GI and MGT were related to KSC 500, and the maximum values were related to KSC 704. While the maximum IP, RWC, fresh mass, dry mass, and TWC were related to KSC 704, the lowest values were achieved for KSC 500. The RWC was the highest for seedlings grown on the 5% extract. The information provided in this article can be helpful in the conditions of the threat of maize seedlings with the mass appearance of mallow.