Total Transmit Power Constraint Research Articles

Reconfigurable Intelligent Surface-Assisted Secure Communication in Cognitive Radio Systems

A reconfigurable intelligent reflective surface (RIS)-assisted cognitive radio (CR) multiple-input multiple-output (MIMO) secure communication system is considered. In the presence of an eavesdropper, a primary base station (PBS) and a cognitive base station (CBS) equipped with multiple antennas communicate to a primary user (PU) and a secondary user (SU), respectively. In order to maximize the achievable secrecy rate of the system, the secrecy rate maximization problem is first transformed into a secure energy efficiency (SEE) problem using an objective function. Then, the security energy efficiency of the system is maximized by jointly optimizing the transmit beam formation of the base station and the reflected beam formation of the smart reflecting surface under the conditions that the total transmitted power constraint and the interference power constraint are satisfied. To address the difficulty in solving the resulting optimization problem, we apply an algorithm based on alternating optimization and semidefinite relaxation, as well as Dinklbach’s algorithm, to solve the problem. Simulation results show that this method can significantly improve the safety energy efficiency of the system.

On Distributed Detection in EH-WSNs With Finite-State Markov Channel and Limited Feedback

We consider a network of N sensors, tasked with solving binary distributed detection, a fusion center (FC), and a feedback channel from the FC to sensors. Each sensor is capable of harvesting energy and is equipped with a finite-size battery to store randomly arrived energy. Sensors process their observations and transmit their symbols to the FC over orthogonal and Markovian time correlated fading channels. The FC fuses the received symbols and makes a global binary decision. We aim at developing adaptive channel-dependent transmit power control policies such that J-divergence based detection metric is maximized at the FC, subject to total transmit power constraint. Modeling quantized fading channel, energy arrival, and battery dynamics as time-homogeneous finite-state Markov chains, and the network lifetime as a geometric random variable, we formulate our power control optimization problem as a discounted infinite-horizon constrained Markov decision process (MDP) problem, where sensors’ transmit powers are functions of the battery states, quantized channel gains, and the arrived energies. We utilize stochastic dynamic programming and Lagrangian approach to find the optimal and sub-optimal power control policies. We demonstrate that our sub-optimal policy provides a close-to-optimal performance with a reduced computational complexity and without imposing signaling overhead on sensors.

Waveform Design and Optimization for Integrated Visible Light Positioning and Communication

In this paper, we investigate an energy efficient waveform design for integrated visible light positioning and communication (VLPC) systems by exploiting the relationship between visible light positioning (VLP) and visible light communication (VLC). We propose that the direct current component and the alternating current component of the VLPC signals are utilized for positioning and communication, respectively. With a single LED-lamp, we propose a received-signal-strength based 3D VLP scheme, and further derive the Cramer-Rao lower bound (CRLB). Then, by exploiting the inherent coupling relationship between VLP and VLC, the positioning results are utilized for channel estimation of VLC, which can significantly reduce the channel estimation pilot overhead. Furthermore, we optimize the waveform design by minimizing the CRLB, while satisfying both the outage probability of communication rate and total transmit power constraints. However, this problem turns to be non-convex and intractable. To address this challenging problem, we utilize the Conditional Value-at-Risk to conservatively transform the outage probability constraint into a deterministic form. By exploiting the block coordinate descent algorithm, the waveform design problem can be efficiently solved by alternately optimizing VLP and VLC convex sub-problems and dual problem. Finally, simulation results verify both the effectiveness and robustness of the proposed waveform design.

SLIPT-Enabled Multi-LED MU-MISO VLC Networks: Joint Beamforming and DC Bias Optimization

This paper studies a simultaneous lightwave information and power transfer (SLIPT)-enabled multi-user (MU) multiple input single output (MISO) visible light communication (VLC) network, where multiple user equipments (UEs) are simultaneously allowed to receive information by the photodiode (PD) and harvest energy by the solar panel, respectively. To improve the system spectral efficiency, an achievable sum rate maximization problem is formulated subject to the minimum energy harvesting (EH) requirement of each UE, the total transmit power constraint of the LEDs and the dimming control constraint of the LEDs, by jointly optimizing the beamforming vector and the direct current (DC) bias vector of the LEDs. To be general, the practical non-linear EH model and the information capacity model of the VLC channel are adopted. To solve the non-convex optimization problem, the objective function is equivalently transformed at first by using the epigraph reformulation, and then the transformed problem is relaxed with the semi-definite relaxation (SDR) method. Based on this, an iterative algorithm is designed to approximately obtain the maximal achievable sum rate based on the successive convex approximation (SCA). Simulation results indicate that there exists a non-trivial trade-off between the achievable sum rate and the harvested energy, and that DC bias vector dominates the amount of the harvested energy compared with the beamforming vector. Besides, for a given relatively high EH requirement, the achievable sum rate increases with the increment of the dimming level, especially for relatively small dimming level. Once the dimming level is larger than a specific value, with the increment of the dimming level, more transmit power will be allocated for illumination, resulting in the decrement of the achievable sum rate.

Integrated sensing and communication waveform design in the Internet of Vehicles

We design an integrated sensing and communication (ISAC) transmission waveform with total transmission power, waveform similarity, and peak-to-average power ratio (PAPR) constraints in the Internet of Vehicles (IoV). The integrated waveform can complete radar target detection while communicating with downlink cellular users. The design of IoV with ISAC can not only improve the spectrum efficiency, but also further promote the integration of communication and sensing equipment. In this paper, the IoV with ISAC is formally modeled from the communication view and sensing view respectively. On this basis, taking the joint optimization of multi-user interference (MUI) total energy and Cramér Rao Bound (CRB) as the objective function, the transmission waveforms are designed with total transmission power, waveform similarity, and PAPR constraints respectively. To obtain the global optimal solution, we adopt a low complexity algorithm to solve the optimization problem under the total transmit power constraint and the optimization problem based on waveform similarity and PAPR constraints is further transformed into a nonconvex quadratically constrained quadratic programming (QCQP) problem, which is solved by using the semidefinite relaxation (SDR) technique. By ranking one approximation of the constrained optimization problem, it can be transformed into the solution of semidefinite programming (SDP) problems. The numerical results show that the designed ISAC transmission waveform can achieve an efficient tradeoff between sensing and communication performance, and each KPI is superior to one of the only communication and only sensing waveform design schemes. And it can improve the real-time information interaction ability of the IoV.

Robust WMMSE Precoder With Deep Learning Design for Massive MIMO

In this paper, we investigate the downlink robust precoding with imperfect channel state information (CSI) for massive multiple-input-multiple-output (MIMO) communications. With the estimated channel and channel error statistics, the general design of the robust precoder is to maximize the ergodic sum rate subject to the total transmit power constraint. To make the problem more tractable, we find a lower bound of the ergodic sum rate and propose the robust weighted minimum mean-squared-error (WMMSE) precoder to maximize the bound. We characterize the structure of the precoding vectors by low-dimensional parameters, which are learned directly from the available CSI through a neural network. As such, the precoding vectors can be immediately computed without iterations. To extend the deep learning design to multi-antennas users, we present a flexible approach that allows the various antenna configurations at the user side to be handled. Simulation results show that the deep learning design can significantly reduce the computational complexity compared with the existing precoder designs while achieving near optimal performance.

Trade-Off Between Positioning and Communication for Millimeter Wave Systems With Ziv-Zakai Bound

In this paper, we investigate the trade-off between positioning and communication for an integrated positioning and communication (IPAC) millimeter wave system. First, in terms of the positioning in the IPAC system, the Cramér-Rao bound (CRB) is commonly used as a performance metric. Unfortunately, the CRB is only tight in a certain region for the high signal-to-noise ratio (SNR). To compensate for this deficiency, we derive the Ziv-Zakai bound (ZZB) for the IPAC system by exploiting the a priori delay information extracted from both the time delay parameter and the channel amplitude attenuation. Further, we derive the expected CRB (ECRB) and the weighted CRB (WCRB) of the system for comparisons. Second, we analyze the trade-off between positioning and communication for this IPAC system based on the derived ZZB. Specifically, we aim to optimize the power allocation to maximize the achievable data rate subject to the ZZB and total transmit power constraints. Numerical results show that the ZZB provides a tighter and more reasonable bound for the minimum mean square error (MMSE) estimator over the wide range of SNRs compared to the ECRB and WCRB. Moreover, the trade-off between positioning and communication is revealed via changing critical parameters by simulations.

Energy-Efficient Resource Allocation for NOMA HetNets in Millimeter Wave Communications

The integration of millimeter-wave (mmWave) and non-orthogonal multiple access (NOMA) has attracted academic and industrial interest as a promising enabling approach due to their massive bandwidth support and greater spectral efficiency. In this paper, we consider NOMA heterogeneous network (HetNet) in mmWave communications, consisting of the macro-cell and small cell tiers connected through the wireless backhaul. Following this, we propose a user grouping algorithm to significantly simplify the user clustering process where each cluster consists of highly correlated users to suppress the inter-cluster interference. We then propose a hybrid analog/digital precoding scheme at the macro base station. The goal is to maximize the system’s total energy-efficiency (EE) in NOMA HetNet by jointly optimizing the transmission of hybrid precoding, power allocation, and bandwidth partition. Next, we formulate an optimization problem within the proposed framework under the minimum data rate and total maximum transmission power constraints. Due to the non-convexity nature of the formulated problem, it is challenging to obtain the optimal solution. As a result, we transform the original problem into a quasi-convex equivalent by analyzing its structure. Then we propose energy-efficient distributed power allocation algorithms to optimize the resource allocation of macro-cell and small cells. Finally, we exhibit the simulation results to demonstrate the proposed algorithm’s performance gains. The simulation results reveal that the proposed algorithmic approach surpasses state-of-the-art and traditional mmWave orthogonal multiple access systems in both capacity and EE.

Secrecy Energy Efficiency Maximization for Multi-User Multi-Eavesdropper Cell-Free Massive MIMO Networks

In this paper, the secrecy energy efficiency (SEE) optimization problem is studied in multi-user multi-eavesdropper cell-free massive multiple-input multiple-output (CF-mMIMO) networks, where a large number of distributed access points (APs) equipped with multiple antennas connect to a central processing unit via backhaul links to communicate with multiple users in the presence of multiple active non-colluding eavesdroppers. In order to theoretically analyze the SEE performance of CF-mMIMO systems, we first provide a lower bound on the ergodic secrecy rate. Meanwhile, a realistic model is used to measure the power consumption of CF-mMIMO networks, which takes into account the radio transmit power of all APs, circuit power consumption, and the power consumed by the backhaul link transmissions. Then, we develop a confidential and energy-efficient design for transmit power allocation subject to individual quality-of-service requirements for the users and total transmit power constraint of all APs. For the reason that the proposed SEE maximization (SEEM) problem is non-convex, we give a two-tier iterative power allocation algorithm, capitalizing on Dinkelbach's method and successive convex approximation approach. Simulation results show that the proposed SEEM algorithm converges fast and outperforms the conventional secrecy rate maximization and energy efficiency maximization strategies in terms of SEE performance.

Beam Direction-Based Modulation for Millimeter-Wave Communication Systems: Design and Optimization

In this paper, we investigate a novel beam direction-based modulation transmit scheme for millimeter-wave (mmWave) communication systems equipped with distributed antennas, and propose an enhanced space-domain index modulation (ESDIM) scheme, in which the number of beamforming directions (BDs) for transmitting information bits can be one or two. The ESDIM system jointly utilizes the combination of the index of BDs and signal constellations to transmit information bits, in which one or two beam directions are considered. In addition, we propose power allocation (PA) aided schemes for ESDIM to further improve the system reliability by reducing the system symbol error rate (SER), where three constraints to the transmit power for beamforming are investigated. To be specific, a total transmit power constraint (TTPC) and two per-beamforming power constraints (PBPC) are considered. We first propose a suboptimal PA algorithm for the TTPC-PA aided ESDIM scheme using a powerful solver based on advanced algebra theories, which only considers the PA aspects for a given selected beamforming pair. Then, we extend the TTPC-PA aided scheme to the average per-beamforming power constraint (APBPC)-PA aided scheme and the strict per-beamforming power constraint (SPBPC)-PA aided scheme. Simulation results show that the proposed schemes improve the system SER performance compared to other existing counterparts.

Distributed Noncoherent Joint Transmission Based on Multi-Agent Reinforcement Learning for Dense Small Cell Networks

In dense small cell networks, the coordinated multi-point noncoherent joint transmission (JT) is a key technique to mitigate inter-cell interference and enhance network capacity. However, the capacity-maximizing power control and beamforming problem subject to a total transmit power constraint at each individual small cell base station (BS) is inherently nonconvex and NP-hard. To solve this problem, most existing algorithms require global channel state information (CSI) and a lot of computations, which are infeasible and impractical in dynamic wireless networks with limited computing power and link capacity. In this paper, we characterize a low-dimensional solution structure for the power control of the sum-rate maximization problem in time division duplex (TDD) dense small cell networks. Taking advantage of this low-dimensional structure, a distributed noncoherent JT scheme based on multi-agent reinforcement learning (MARL) is proposed to maximize the sum-rate of the dense small cell networks with reduced information overhead. In the proposed scheme, each BS acts as an agent and makes decisions locally. It is proved that the optimal sum-rate can be achieved for single-transmit-antenna BSs by using the proposed scheme. Compared to the best method presently known, the proposed scheme achieves a similar sum-rate with considerably lower computational complexity and information overhead, which makes it more appealing for practical implementations.

Joint User Scheduling and Hybrid Beamforming Design for Massive MIMO LEO Satellite Multigroup Multicast Communication Systems.

In the satellite multigroup multicast communication systems based on the DVB-S2X standard, due to the limitation of the DVB-S2X frame structure, user scheduling and beamforming design have become the focus of academic research. In this work, we take the massive multi-input multi-output (MIMO) low earth orbit (LEO) satellite communication system adopting the DVB-S2X standard as the research scenario, and the LEO satellite adopts a uniform planar array (UPA) based on the fully connected hybrid structure. We focus on the coupling design of user scheduling and beamforming; meanwhile, the scheme design takes the influence of residual Doppler shift and phase disturbance on channel errors into account. Under the constraints of total transmission power and quality of service (QoS), we study the robust joint user scheduling and hybrid beamforming design aimed at maximizing the energy efficiency (EE). For this problem, we first adopt the hierarchical clustering algorithm to group users. Then, the semidefinite programming (SDP) algorithm and the concave convex process (CCCP) framework are applied to tackle the optimization of user scheduling and hybrid beamforming design. To handle the rank-one matrix constraint, the penalty iteration algorithm is proposed. To balance the performance and complexity of the algorithm, the user preselected step is added before joint design. Finally, to obtain the digital beamforming matrix and the analog beamforming matrix in a hybrid beamformer, the alternative optimization algorithm based on the majorization-minimization framework (MM-AltOpt) is proposed. Numerical simulation results show that the EE of the proposed joint user scheduling and beamforming design algorithm is higher than that of the traditional decoupling design algorithms.

Hybrid Beamforming Designs for Frequency-Selective mmWave MIMO Systems With Per-RF Chain or Per-Antenna Power Constraints

Configuring precoders and combiners is a major challenge to deploy practical multiple-input multiple-output (MIMO) millimeter wave (mmWave) communication systems with large antenna arrays. Most prior work addresses the problem focusing on a total transmit power constraint. In practical transmitters, however, power amplifiers must operate within their linear range, so that a power constraint applies to each one of the input signals to these devices. Therefore, precoder and combiner designs should incorporate per-antenna or per-radio frequency (RF) chain transmit power constraints. We focus on such problem for frequency-selective channels with multicarrier modulation, and assuming hybrid analog/digital architectures based on fully connected analog blocks implemented with finite-resolution phase shifters. We first derive an all-digital solution which aims to maximize spectral efficiency. Then, we develop hybrid precoders and combiners by approximately matching the corresponding all-digital matrices while still enforcing the power constraints. Numerical results show that the proposed all-digital design performs close to the upper bound given by the standard waterfilling-based solution with a total power constraint. Additionally, the hybrid designs exhibit a moderate loss even when low-resolution phase shifters are considered.

Collaborative Beamforming Aided Fog Radio Access Networks

The success of fog radio access networks (F-RANs) is critically dependent on the potential quality of service (QoS) that they can offer to users in the face of capacity-constrained fronthaul links and limited caches at their remote radio heads (RRHs). In this context, the collaborative beamforming design is very challenging, since it constitutes a large-dimensional nonlinearly constrained optimization problem. The paper develops a new technique for tackling these critical challenges in fog computing. We show that all the associated constraints can be efficiently dealt with maximizing the geometric mean (GM) of the user throughputs (GM-throughput) subject to the affordable total transmit power constraints. To elaborate, the GM-throughput maximization judiciously exploits the fronthaul links and the RRHs’ caches by relying on our novel algorithm, which evaluates low-complexity closed-form expressions in each of its iterations. The problem of F-RAN energy-efficiency is also addressed while maintaining the target throughput. Numerical examples are provided for quantifying the efficiency of the proposed algorithms.

Energy Efficiency of Full- and Half-Duplex Decode-and-Forward Relay Channels

This article studies the energy efficiency (EE) of a three-node decode-and-forward (DF) relay channel, where the relay operates in full-duplex (FD) or half-duplex (HD) mode. In particular, for the FD mode, both the residual self-interference (RSI) and the extra circuit power consumption introduced by the self-interference cancellation (SIC) at the relay node are considered and modeled as linear functions over the relay transmission power. Under this setup, the EE maximization problems for the considered FD and HD modes subject to the total transmission power and spectral efficiency (SE) constraints are formulated as max–min problems, whose optimal power allocation is computed by fractional programming. Next, the EEs for the FD, HD, and direct transmission (DT) modes are compared under different channel conditions, and a hybrid mode selection scheme, i.e., selecting the one with the maximum EE among the above three modes, is proposed. Besides, we also prove that both the EE and the SE monotonically increase with the total transmission power under a given condition. Finally, numerical results show that the maximum EE of the FD relaying exceeds those of the HD and DT ones when the required SE is relatively high. Furthermore, the proposed hybrid mode selection scheme can provide up to 192.4% higher EE compared with the DT mode.

Joint Transmit Precoding and Reflect Beamforming Design for IRS-Assisted MIMO Cognitive Radio Systems

In this paper, we consider an intelligent reflecting surface (IRS)-assisted downlink cognitive radio (CR) system, in which a secondary access point (SAP) communicates with multiple secondary users (SUs) without affecting multiple primary users (PUs) in the primary network and all nodes are equipped with multiple antennas. Our design objective is to maximize the achievable weighted sum rate (WSR) of SUs subject to the total transmit power constraint at the SAP and the interference constraints at PUs, by jointly optimizing the transmit precoding at the SAP and the reflecting coefficients at the IRS. To deal with the complex objective function, the problem is reformulated by employing the well-known weighted minimum mean-square error (WMMSE) method and an alternating optimization (AO)-based algorithm is proposed. Furthermore, a special scenario with only a single PU and multiple SUs is considered and AO algorithm is adopted again. It is worth mentioning that the proposed algorithm has a much lower computational complexity than the above algorithm without the performance loss. Finally, some numerical simulations have been provided to demonstrate that the proposed algorithm outperforms other benchmark schemes.

Joint Content Caching, Recommendation, and Transmission Optimization for Next Generation Multiple Access Networks

We exploit a behavior-shaping proactive mechanism, namely, recommendation, in cache-assisted non-orthogonal multiple access (NOMA) networks, aiming at minimizing the average system’s latency. Thereof, the considered latency consists of two parts, i.e., the backhaul link transmission delay and the content delivery latency. Towards this end, we first examine the expression of system latency, demonstrating how it is critically determined by content cache placement, personalized recommendation, and delivery associated NOMA user pairing and power control strategies. Thereafter, we formulate the minimization problem mathematically taking into account the cache capacity budget, the recommendation-oriented requirements, and the total transmit power constraint, which is a non-convex, multi-timescale, and mixed-integer programming problem. To facilitate the process, we put forth an entirely new paradigm named <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">divide-and-rule</i> . Specifically, we first solve the short-term optimization problem regarding user pairing as well as power allocation and the long-term decision-making problem with respect to recommendation and caching, respectively. On this basis, an iterative algorithm is developed to optimize all the optimization variables alternately. Particularly, for solving the short-timescale problem, graph theory enabled NOMA user grouping and efficient inter-group power control manners are invoked. Meanwhile, a dynamic programming approach and a complexity-controllable swap-then-compare method with convergence insurance are designed to derive the caching and recommendation policies, respectively. From Monte-Carlo simulation, we show the superiority of the proposed joint optimization method in terms of both system latency and cache hit ratio when compared to extensive benchmark strategies.

Energy‐efficient alternating current computing‐enabled receiver design for K‐user interference channel simultaneous wireless information and power transfer networks

SummaryEnergy efficiency is one of the key challenges in fifth generation (5G) and beyond wireless communication systems. Recently, simultaneous wireless information and power transfer (SWIPT) systems are usually adopted to enhance energy efficiency. The harvested energy through power transfer is first rectified to generate the direct current (DC) voltage that is used to power the communication devices. This rectification reduces the energy efficiency due to losses in conversion to DC voltages. In this work, we consider integrated information decoding and energy harvesting receiver architecture through power splitting SWIPT network that enables alternating current (AC) computational logic. The AC computing method is used to supply the computing block of receivers to further enhance the energy efficiency. Multiuser multiple input single output (MISO) interference channel (IC) is considered, where receivers are required to compromise between quality of service (QoS) and energy consumption. The system sum rate is maximized under sum harvested energy and total transmit power constraints through joint beamforming and power splitting factors design. For the problem tractability in the proposed AC computing‐enabled receiver, standard beamforming schemes are deployed, namely, zero forcing (ZF), regularized zero forcing (RZF), maximum ratio transmission (MRT), and a hybrid scheme between MRT and ZF beamforming (MRT‐ZF). Moreover, the power splitting ratios design problem is transformed into a one dimension search problem. Simulation results show that different beamforming designs exhibit a great trade‐off between the achieved rate and the harvested energy.

Spectral and Energy Efficiency of ACO-OFDM in Visible Light Communication Systems

In this paper, we study the spectral efficiency (SE) and energy efficiency (EE) of asymmetrically clipped optical orthogonal frequency division multiplexing (ACO-OFDM) for visible light communication (VLC). Firstly, we derive the achievable rates for Gaussian distributions inputs and practical finite-alphabet inputs. Then, we investigate the SE maximization problems subject to both the total transmit power constraint and the average optical power constraint with the above two inputs, respectively. By exploiting the relationship between the mutual information and the minimum mean-squared error, an optimal power allocation scheme is proposed to maximize the SE with finite-alphabet inputs. To reduce the computational complexity of the power allocation scheme, we derive a closed-form lower bound of the SE. Also, considering the quality of service, we further tackle the non-convex EE maximization problems of ACO-OFDM with the two inputs, respectively. The problems are solved by the proposed Dinkelbach-type iterative algorithm. In each iteration, the interior point algorithm is applied to obtain the optimal power allocation.The performance of the proposed power allocation schemes for the SE and EE maximization are validated through numerical analysis.

Transceiver Design and Power Control for Full-Duplex Ultra-Reliable Low-Latency Communication Systems

Ultra-reliable low-latency communication (URLLC) is one of the most important components in the fifth generation (5G) cellular networks for realizing mission-critical applications. In this paper, we jointly optimize the transceiver design and decoding error probability (DEP) of a full-duplex (FD) URLLC system, where the base station (BS) operates in FD mode, while the uplink (UL) and downlink (DL) users work in half-duplex (HD) mode. Accordingly, an optimization problem is formulated to maximize the achievable total (UL plus DL) rate for an FD URLLC system under finite blocklength, subject to the end-to-end (E2E) reliability constraint from the UL user to each DL user and the total transmission power constraint at the UL user and at the BS. We analyze the problem structure and convexify the problem by approximating the channel dispersion in scenarios of high and mid-to-high signal-to-interference plus noise ratio (SINR) regimes, respectively. Next, efficient iterative algorithms are proposed to find the near-optimal power allocation for the UL user and transceiver weights for the BS. Furthermore, closed-form expressions of the transceiver weights are derived, and the convergence of the proposed algorithms is proved. Simulation examples demonstrate the impact of the code blocklength, number of DL users, transmitter/receiver distortion and DEP threshold on the system performance.