Total Polycyclic Aromatic Hydrocarbons Research Articles

Occurrence and characteristics of PAHs in coastal seawater off the city of Samsun on the Black Sea coast of Turkey

Polycyclic aromatic hydrocarbons (PAHs) concentrations in seawater were monitored seasonally along the Samsun coast, Turkey, between August 2019 and May 2020 to elucidate main origin, seasonal variations, and risk pathways of PAHs. Total PAH concentrations in surface seawater ranged from 24.86 to 477.78 ng L−1 (mean 138.90, SD 62.22 ng L−1), with relatively higher levels in summer and autumn seasons. Combustion products were the major sources of PAHs. The increased PAH levels during the summer period may have resulted from the more intense industrial and agricultural activities. The highest proportion of PAHs were 3- and 2-ringed, accounting for 39.23 % and 26.50 % of ΣPAHs, respectively, and their derivatives Nap and Phe predominated in individual PAHs. While RQ values of ∑PAHs showed low ecological risk, RQMPCs of BpF and BaA in autumn and BpF in summer were at high ecological risk.

Large-scale soil application of hydrochar: Reducing its polycyclic aromatic hydrocarbon content and toxicity by heating

The beneficial roles of hydrochar in carbon sequestration and soil improvement are widely accepted. Despite few available reports regarding polycyclic aromatic hydrocarbons (PAHs) generated during preparation, their potential negative impacts on ecosystems remain a concern. A heating treatment method was employed in this study for rapidly removing PAHs and reducing the toxicity of corn stover-based hydrochar (CHC). The result showed total PAHs content (∑PAH) decreased and then sharply increased within the temperature range from 150 °C to 400 °C. The ∑PAH and related toxicity in CHC decreased by more than 80% under 200 °C heating temperature, compared with those in the untreated sample, representing the lowest microbial toxicity. Benzo(a)pyrene produced a significant influence on the ecological toxicity of the hydrochar among the 16 types of PAHs. The impact of thermal treatment on the composition, content, and toxicity of PAHs was significantly influenced by the adsorption, migration, and desorption of PAHs within hydrochar pores, as well as the disintegration and aggregation of large molecular polymers. The combination of hydrochar with carbonized waste heat and exhaust gas collection could be a promising method to efficiently and affordably reduce hydrochar ecological toxicity.

Polycyclic Aromatic Hydrocarbon (PAHs) Levels in Treated Spent Engine Oil Contaminated Soil from Automechanic Workshop Site in Wukari, Nigeria

Spent engine oil contaminated soil samples were collected and divided into three portions along with uncontaminated soil sample collected 10 meters away from the contaminated site. Two of the contaminated soil samples were treated with 0.5M NaOH and heat at 2500C respectively. All the samples were extracted with appropriate solvents using sonication, cleaned up and then analyzed with gas chromatograph coupled to flame ionization detector. The results show that total PAHs concentration of contaminated soil sample was 333.6820 mg/kg, contaminated soil sample treated with 0.5M NaOH, 104.8540 mg/kg, contaminated soil sample treated with heat at 2500C was 180.0905 mg/kg and the uncontaminated soil sample, 0.7084 mg/kg. The results showed that Wukari mechanic village is contaminated with PAHs through indiscriminate disposal of spent engine oil. Furthermore, treatment with 0.5M NaOH was a more effective means of remediation relative to treatment with heat at 250oC for two hours. The study will be an appropriate guide for the artisans following enlightenment about the possible threat that contact with PAH contaminated soils could have on their health. 

Chemical and Thermal Exposure Risks in a Multi Compartment Training Structure

AbstractProviding NFPA 1403 compliant live-fire training can present thermal and chemical exposure risk to instructors and students. To reduce risk, training academies, fire departments, instructors, and standards setting technical committees need more information on how different training fuels used in common training structures can impact the environment in which firefighter training occurs. This study utilized a traditional concrete training structure with multiple compartments to characterize training environments with three different fuel package materials [i.e., low density wood fiberboard, oriented strand board (OSB), and wood pallets]. Exposure risks for a fire instructor located on either the first or second floor were characterized using measurements of heat flux, air temperature and airborne concentrations of several contaminants including known, probable, or possible carcinogens. It was hypothesized that utilizing a training fuel package with solid wood pallets would result in lower concentrations of these airborne contaminants [aldehydes, polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs)] than wood-based sheet goods containing additional resins and/or waxes. Additionally, it was hypothesized that these concentrations would be lower than in the single compartment Fire Behavior Lab presented in a companion manuscript. For all measured compounds other than hydrochloric acid, airborne concentrations were 10 to 100 times lower than in the Fire Behavior Lab. OSB-fueled fires produced the highest median concentrations of total PAHs and VOCs such as benzene, while the pallet fuel package produced the lowest median concentrations of these compounds. These trends generally followed the qualitative visual obscuration created by each fuel. Additional tests were conducted on the OSB-fueled fires with increased ventilation and an alternate means of reducing visibility through smoldering smoke barrels. This OSB experiment with increased ventilation resulted in the highest temperatures in the fire room but the lowest impact on visibility throughout the structure, as well as the lowest overall concentrations of contaminants in this study. In contrast, the smoldering straw-filled smoke barrel created a highly obscured environment (with minimal impact on thermal environment) and some of the highest concentrations of the targeted contaminants of any test. These data may be useful in balancing obscuration for training with potential exposure to thermal stressors and contaminants.

Removal of polycyclic aromatic hydrocarbons (PAHs) from produced water using the microalgae Chlorella vulgaris cultivated in mixotrophic and heterotrophic conditions

Chlorella vulgaris was cultivated for 15 days in 10 different treatments under mixotrophic and heterotrophic conditions, using wastewater from oil and poultry industries as the culture medium. The blends were made with produced water (PW), sterilized produced water (PWs), sterilized poultry wastewater (PoWs), sterilized seawater (SWs), and the addition of sodium nitrate to evaluate cell growth in treatments and the removal of PAHs. The heterotrophic condition showed more effective removal, having an initial concentration of 3.93 μg L−1 and a final concentration of 0.57 μg L−1 of total PAHs reporting 83%, during phycoremediation of (PW) than the mixotrophic condition, with an initial concentration of 3.93 μg L−1 and a final concentration of 1.96 and 43% removal for the PAHs. In the heterotrophic condition, the blend with (PWs + SWs) with an initial concentration of 0.90 μg L−1 and a final concentration of 0.32 μg L−1 had 64% removal of total PAHs compared to the mixotrophic condition with 37% removal having an initial concentration of 0.90 μg L−1 and a final concentration of 0.56 μg L−1. However, the best result in the mixotrophic condition was obtained using a blend of (PWs + PoWs) that had an initial cell concentration of 1.18 × 105 cells mL−1 and reached a final cell concentration of 4.39 × 105 cells mL−1, an initial concentration of 4.76 μg L−1 and a final concentration of 0.37 μg L−1 having a 92% total removal of PAHs. The biostimulation process increased the percentage of PAHs removal by 45% (PW) in the mixotrophic condition. This study showed that it is possible to allow an environmental remediation strategy that significantly reduces effluent toxicity and generates high value-added biomass in contaminated effluents rich in nutrients and carbon, based on a circular bioeconomy model.

Potassium peroxoborate: A sustained-released reactive oxygen carrier with enhanced PAHs contaminated soil remediation performance

Seeking for a safe, efficient, inexpensive, and eco-friendly oxidizer is always a big challenge for in-situ chemical oxidation (ISCO) technology. This study adopted the potassium peroxoborate (PPB), a novel peroxide, for soil remediation for the first time. PPB based chemical oxidation system (PPB-CO) could efficiently degrade polycyclic aromatic hydrocarbons (PAHs) without other reagents added, reaching 72.1 %, 64.2 %, and 50.0 % removal rates for naphthalene, phenanthrene, and pyrene after 24 h reaction, respectively. The superior total PAHs removal efficiency (60.6 %) was 3.6–4.7 times higher than that of other commercial peroxides (2Na2CO3•3H2O, CaO2, and H2O2). Mechanism analysis revealed that varieties of reactive oxygen species (ROS) can be generated by PPB through Fenton-like or non-Fenton routines, including H2O2, perborates species, O2•−, •OH, and 1O2. The sustainable generation of H2O2 reduced the disproportionation effect of H2O2 by 86 %, significantly improving the utilization rate. Moreover, sandbox experiments and actual contaminated soil remediation experiments verified the feasibility of PPB-CO in a real polluted site. This work provides a novel strategy for effectively soil remediation, highlighting the selection and application of new oxidants.

Appraisal of polycyclic aromatic hydrocarbons (PAHs) in indoor dust of Eastern Nigeria and its implications in the COVID-19 years

The risk assessment of PAHs in settled indoor dusts from different localities of Awka, Ekwulobia, and Rumuodomaya–Ogale, Eastern Nigeria, were investigated. Settled dust samples (n = 144) were collected from the windows and floor using brush and analyzed for PAHs with GC- FID. Dust from the windows showed higher total PAHs concentrations than the floor in the order; Rumuodomaya–Ogale > Ekwulobia > Awka. The 3- and 4-ring PAHs were dominant in the window and floor dust of Awka in all the months, while the 3-ring PAHs were the dominant compound in Ekwulobia. The concentrations of total PAH in the window and floor dusts of Ekwulobia, showed a significant difference across the months (p < 0.05). In Rumuodomaya–Ogale, the 3, 4, and 5-ring PAHs supersede in the window and floor dust. This showed that dust is a major sink for 3–5-ring PAHs. The compounds; BaA, DahA, Ant, BaP, and DBA were the major contributors to benzo(a)pyrene as toxicity equivalence (BaPTEQ) values of the window and floor dust. The total incremental life cancer risk was < 1.0 × 10−04 in all the study area; hence, the increased indoor activities during COVID-19 lockdown had no significant cancer effect on human health of the populace.

Can environmental factors increase oxidative responses in fish exposed to polycyclic aromatic hydrocarbons (PAHs)?

Relations among polycyclic aromatic hydrocarbons (PAHs), biomarkers of oxidative stress (lipid peroxidation, glutathione, and glutathione S-transferase activity), and the possible influence of environmental factors (temperature, pH, and salinity) were assessed in situ for specimens of Ramnogaster arcuata, a native estuarine fish. PAH levels found in the muscular tissue of R. arcuata ranged from 0.7 to 293.4 ng g−1 wet weight with petrogenic and pyrolytic inputs. Lipid peroxidation in the liver showed positive correlations (P < 0.05) with total PAHs (r = 0.66), 3-ring (r = 0.66) and 4-ring PAHs (r = 0.52) and glutathione in muscle (r = 0.58). Significant positive correlations (P < 0.05) were also evidenced between muscular glutathione with total (r = 0.62) and 3-ring PAHs (r = 0.75). Hepatic glutathione S-transferase negatively correlated with 4-ring PAHs (r = −0.58). These correlations suggest that lipid peroxidation and muscular glutathione could be good biomarkers for complex mixtures of PAHs, and hepatic glutathione S-transferase could be a suitable biomarker for 4-ring PAHs. Furthermore, significant correlations (P < 0.05) of environmental factors with PAH levels and biomarkers were observed, especially pH with 3-ring PAHs (r = −0.65), lipid peroxidation (r = −0.6), glutathione in the liver (r = −0.73) and muscle (r = −0.75); and temperature with 2-ring PAHs (r = −0.75) and glutathione in muscle (r = 0.51). The data suggest an influence of physicochemical parameters which could be driving a shift in PAH toxicity in R. arcuata. These results are essential for an integrated understanding of ecotoxicology and could help to predict environmental effects in present and future scenarios of ocean warming and acidification.

Formation mechanism of polycyclic aromatic hydrocarbons in grilled beef and the mitigative effect of flavonoids

AbstractPolycyclic aromatic hydrocarbons (PAHs) are found in many common foods and increase the risk of cancer in humans. This study systematically screened the components that may be related to the formation of PAHs by an excessive addition of 19 amino acids and glucose in the beef patties. Phenylalanine and glucose exhibited the potential as promoters of PAHs, while lysine, aspartic acid, glutamic acid, valine, and methionine exhibited excellent potential as inhibitors of PAHs. Subsequently, a chemical model containing phenylalanine and glucose was established to confirm their roles as precursors of PAHs. The formation mechanism of PAHs showed that naphthalene was first formed as a basic structure, and then, PAHs with more rings were further formed through substitution, addition reactions, or intramolecular cyclization reactions. The mitigative effects of four flavonoids on total PAH contents were in the order: kaempferol &gt; naringenin (better for individual PAH) &gt; myricetin &gt; quercetin (contradictory), which suggested that the antioxidant ability or radical scavenging capacity of flavonoids may be one of the pathways for PAH inhibition.

Distribution Characteristics and Pollution Sources Analysis of Polycyclic Aromatic Hydrocarbons and Phthalate Esters in the Seawater of Land-Based Outlets around Zhanjiang Bay in Spring

This study analyzed the distribution characteristics and sources of pollutants in the coastal estuaries of Zhanjiang Bay (ZJB) to provide theoretical and data support for the scientific prevention and control of bay pollution. Monitoring data from eight rivers and flood drains flowing into ZJB in March 2021 were used to analyze the composition and spatial distribution characteristics of polycyclic aromatic hydrocarbons (PAHs) and phthalate esters (PAEs) in the water bodies of the bay. The dominant components in the eight rivers and flood drains were 3–4-ring PAHs, with Bis (2-ethylhexyl) phthalate (DEHP), Diisobutyl phthalate (DIBP), and Dibutyl-O-phthalate (DBP) being the main PAE compounds. Higher pollutant levels were observed in residential areas, aquaculture zones, and industrial areas. Eigen-ratio analysis and principal component analysis were used to identify pollution sources, including atmospheric inputs (coal, petroleum products, biomass combustion products), offshore petroleum pollution, and plastic pollution sources. The assessment showed that atmospheric inputs contributed to 89.75% of the total PAHs in the bay, with coal and biomass combustion accounting for 62.12% and petroleum fuel combustion accounting for 27.63%. The content of ΣPAEs ranged from 588.43 to 1427.26 ng·L−1, with a mean value of 906.59 ng·L−1, which is at a low to medium level compared to other regions of China and abroad, indicating a medium-low level of pollution risk. The results of this study have important implications for guiding urban development, adjusting energy consumption structures, and planning pollution prevention and control measures in ZJB.

PAH bioremediation with Rhodococcus rhodochrous ATCC 21198: Impact of cell immobilization and surfactant use on PAH treatment and post-remediation toxicity

Polycyclic aromatic hydrocarbons (PAHs) are prevalent environmental contaminants that are harmful to ecological and human health. Bioremediation is a promising technique for remediating PAHs in the environment, however bioremediation often results in the accumulation of toxic PAH metabolites. The objectives of this research were to demonstrate the cometabolic treatment of a mixture of PAHs by a pure bacterial culture, Rhodococcus rhodochrous ATCC 21198, and investigate PAH metabolites and toxicity. Additionally, the surfactant Tween ® 80 and cell immobilization techniques were used to enhance bioremediation. Total PAH removal ranged from 70–95% for fluorene, 44–89% for phenanthrene, 86–97% for anthracene, and 6.5–78% for pyrene. Maximum removal was achieved with immobilized cells in the presence of Tween ® 80. Investigation of PAH metabolites produced by 21198 revealed a complex mixture of hydroxylated compounds, quinones, and ring-fission products. Toxicity appeared to increase after bioremediation, manifesting as mortality and developmental effects in embryonic zebrafish. 21198′s ability to rapidly transform PAHs of a variety of molecular structures and sizes suggests that 21198 can be a valuable microorganism for catalyzing PAH remediation. However, implementing further treatment processes to address toxic PAH metabolites should be pursued to help lower post-remediation toxicity in future studies.

Personal exposure monitoring to polycyclic aromatic hydrocarbons bound to size-segregated aerosol

Air pollution is a global problem, where impaired air quality significantly damages human health and the environment. Twenty-four hours of personal exposure to size-segregated airborne particulate matter (PM) and associated polycyclic aromatic hydrocarbons (PAHs) were measured in 129 non-smoking residents living in two Czech cities, Ostrava (an industrial area with high levels of air pollution) and Ceske Budejovice (an agricultural area with lower air pollution level) in various seasons between years 2018–2020. Particulate matter (PM) was sampled by cascade impactors based on their aerodynamic diameter (dae, μm) and divided into size fractions: coarse (2.5 < dae), fine (0.25 < dae < 2.5) and ultrafine (<0.25). Size distributions of 20 priority PAHs adsorbed on these PM fractions were analyzed by gas chromatography coupled to tandem mass spectrometry in electron ionization (GC-EI-MS/MS). The total concentration of ∑20PAHs to which residents were exposed ranged from 0.09 ng/m3 to 47.18 ng/m3. A higher level of PAHs was detected in Ostrava (mean: 5.59 ng/m3) than in Ceske Budejovice (mean: 1.96 ng/m3). Statistically significant concentration differences between PAHs in individual seasons were observed in both sampled localities, with higher concentrations measured in winter than in summer. Fine and ultrafine particles predominated in the mass composition of the particulate matter. The ultrafine particle size contained 67–80% of total PAHs. Respiratory health risk was estimated based on inhalation cancer risk (ICR). Cancer risk attributable to personal inhalation exposure ranged from 2.8 × 10−8 to 4.3 × 10−4. In winter, higher cancer risk were found in Ostrava, mainly caused by a high concentration of carcinogenic PAHs bound to ultrafine particles. Overall, the personal monitoring data confirmed a higher air pollution burden in the industrial area and the winter season and highlighted the importance of focusing on ultrafine particles as the main carriers of potentially mutagenic and carcinogenic substances, such as PAHs. In addition, personal monitoring data provided more detailed and accurate information on individual-level exposures, revealing significant differences in exposure concentrations in people living in the same area.

Space-specific flux estimation of atmospheric chemicals from point sources to soil

Predicting chemical flux to soil from industrial point sources accurately at a regional scale has been a significant challenge due to high uncertainty in spatial heterogeneity and quantification. To address this challenge, we developed an innovative approach by combining California Air Resources Board Puff (CALPUFF) and mass balance models, leveraging their complementary strengths in quantitative accuracy and spatial precision. Specifically, CALPUFF was used to predict the polycyclic aromatic hydrocarbons (PAHs) flux to soil due to industrial sources. Additionally, the spatial distribution coefficient of PAHs flux (e.g., si for spatial unit i) was calculated by neural network and combined with the mass balance model to obtain the results of total PAHs fluxes, which were then combined with the results predicted by CALPUFF to effectively estimate the contribution of industrial sources to soil PAHs flux. Taking a petrochemical industry region located in Zhejiang province, China as a case study, results showed the input Phenanthrene (Phe) and Benzo(a)pyrene (BaP) fluxes predicted by CALPUFF were generally lower than those by the mass balance model, with slightly different distribution patterns. CALPUFF results, based on 36 industrial sources, partially represent those of the mass balance model, which includes all sources and pathways. It was suggested that industrial sources contributed 49%–89% and 65%–100% of soil Phe and BaP, respectively across the study area. The average Phe flux from point sources by deposition averaged 2.68 mg m−2∙a−1 in 2021, accounting for approximately 60% of the total Phe flux to soil. The average BaP flux from point sources by deposition averaged 0.0755 mg m−2∙a−1, accounting for only 0.1%–3.65% of the total BaP flux to soil. Thereby, our approach fills up a gap between the relevance to point sources and the accuracy of deposition quantification in estimating chemical flux from specific point sources to soil at a regional scale.

Remediation potential of an immobilized microbial consortium with corn straw as a carrier in polycyclic aromatic hydrocarbons contaminated soil

Polycyclic aromatic hydrocarbons (PAHs) are widespread in soils and threaten human health seriously. The immobilized microorganisms (IM) technique is an effective and environmentally sound approach for remediating PAH-contaminated soil. However, the knowledge of the remedial efficiency and the way IM operates using natural organic materials as carriers in complex soil environments is limited. In this study, we loaded a functional microbial consortium on corn straw to analyze the effect of IM on PAH concentration and explore the potential remediation mechanisms of IM in PAH-contaminated soil. The findings revealed that the removal rate of total PAHs in the soil was 88.25% with the application of IM after 20 days, which was 39.25% higher than the control treatment, suggesting that IM could more easily degrade PAHs in soil. The findings from high-throughput sequencing and quantitative PCR revealed that the addition of IM altered the bacterial community structure and key components of the bacterial network, enhanced cooperative relationships among bacteria, and increased the abundance of bacteria and functional gene copies such as nidA and nahAc in the soil, ultimately facilitating the degradation of PAHs in the soil. This study enhances our understanding of the potential applications of IM for the treatment of PAH-contaminated soil.

Potential of Pinus eldarica Medw. tree bark for biomonitoring polycyclic aromatic hydrocarbons in ambient air

Urban trees' biomonitoring of pollutants such as polycyclic aromatic hydrocarbons (PAHs) yields pertinent and useful data for air pollution management. The aim of this study was to biomonitor PAHs in pine (Pinus eldarica Medw.) trees in the city of Isfahan and identify their sources. In total, 34 samples of outer bark of the trees were collected and their contents of 16 EPA PAHs were analyzed. With a median value of 136.3 ng/g, the total PAH contents in tree barks varied from 53.4 to 705.2 ng/g. The average values of the diagnostic ratios for Ant/(Ant + Phe), Flu/(Flu + Py), BaA/(BaA + Chr) and IP/(IP + BP) were 0.19, 0.49, 0.45 and 0.49, respectively, revealing the PAHs majority source of pyrogenic. Meanwhile, principal component analysis showed two major types of PAHs sources including pyrogenic (fossil fuel combustion and industrial activities) and petrogenic (uncombusted) sources. The average ratio An/(An + Phe) and Flu/(Flu + Py) in bark samples was close to their relevant ratios in ambient air which demonstrated the potential use of this approach for biomonitoring of PAHs.

Bioaccumulation of heavy metals and petroleum hydrocarbons in the blue crab (&lt;i&gt;Callinectes sapidus&lt;/i&gt;, Rathbun 1896) from Ogu Creek in Upper Bonny Estuary, Nigeria

Prolonged industrial and artisanal discharge of petroleum refinery effluents into the Ogu Creek at the Upper Bonny estuary of the Niger Delta could pose a great threat to the aquatic biotopes. This research investigated bioaccumulation of selected heavy metals and petroleum hydrocarbons in the blue crab (Callinectes sapidus) from the creek. Crabs (N=20; average length 18±20cm; weight 150.18±0.02g) were collected with nets. Mean concentrations (mg/l) of Zn (0.044±0.01), Cd (0.002±0.00), Cr (0.001±0.00), Pb (0.001±0.00), Fe (5.82±0.29), Mn (0.001±0.00), total petroleum hydrocarbons (TPH; 40.23±2.83) and total polynuclear aromatic hydrocarbons (ΣPAHs;7.60±1.29) were lower in water than sediments (22.10±1.37, 1.98±0.04, 2.13±0.09, 4.80±0.57, 24.03±1.29, 0.04±0.01, 70.93±3.10 and 29.80±4.02mg/kg, respectively) at the impacted location. Accumulations (μg/g) in digestive tract (dtr), muscle (mus) and ovaries (ov) were as follows: Zn 10.50 (dtr), 11.00 (mus), 2.40 (ov); Cr 0.21 (dtr), 0.10 (mus), 0.04 (ov); Cd 0.01 (dtr), 0.02 (mus), 0.01 (ov); Pb 0.04 (dtr), 0.02 (mus), 0.01 (ov); Mn 0.05 (dtr), 0.03 (mus), 0.01 (ov); TPH 4.14 (dtr), 3.14 (mus), 1.20 (ov); and mononuclear aromatic hydrocarbons (MAHs=BTEX) 0.01μg/g (dtr), 0.02 μg/g (mus), 0.01 μg/g (ov). Accumulations of TPH and BTEX were significantly (p&lt;0.05) higher at the impacted location (p = 0.03 and 0.02, respectively) than reference locations. High TQ/HQ values of 1.59, 2.82 and 1.90 were recorded for Zn, TPHs and PAHs, respectively. The results raise environmental health concerns among consumers of the aquatic food in the area.

Effect of PM2.5 exposure on adhesion molecules and systemic nitric oxide in healthy adults: The role of metals, PAHs, and oxidative potential

Since there is limited evidence on the impact of PM2.5 content on cardiovascular biomarkers, we conducted a cross-sectional study on 89 healthy adults from October 12 to November 21, 2021. We measured daily PM2.5 in two distinct regions during different time windows: a high-traffic urban area and an industrial suburb. The concentrations of metals, PAHs, and oxidative potential (OP) were determined using ICP-MS, GC-MS, and dithiothreitol (DTT), respectively. Systemic biomarkers, including NO, sICAM-1, sVCAM-1, MDA, and CRP, were quantified in each subject simultaneously. A generalized linear model was used to examine the association between PM2.5 toxicity and each health endpoint. Our findings indicated that daily PM2.5 concentrations exceeded the WHO-recommended level by approximately sevenfold. We found that PM2.5 exposure was associated with adverse cardiovascular outcomes. Moreover, exposure to PM2.5 mass, total PAHs, and certain trace metals (Ni, Fe, V, As, and Pb) resulted in a decline in serum NO levels. At lag 3, exposure to PM2.5 mass resulted in a significant decrease in NO levels [1.32% (95% CI: −2.27, −0.12)] and total PAHs [2.05% (95% CI: −3.93, −0.12)]. In contrast, OP exhibited a mild correlation with NO level increases. Positive associations were observed between PM2.5 and its chemical constituents (PAHs, As, Cu, OP) and adhesion molecules at different lag times. An increase of 0.16 ppb in PAH concentrations at an interquartile range was associated with a 4.74% decline (95% CI, −7.80, −0.55) in the sVCAM-1 level. However, our study did not reveal any significant trend between pollutants and other biomarkers (sICAM-1, MDA, and CRP). Consequently, our findings suggest that different PM2.5 chemical compositions exhibit diverse behavior in biological responses.

Sources of hydrocarbons and their risk assessment in seawater and sediment samples collected from the Nile Delta coast of the Mediterranean Sea

The aim of this work is to examine the levels, distribution, bases, and hazards of n-alkanes (n-C9 to n-C20) and PAHs in the seawater and sediments around oil production locations in the whole delta region. The variations in the levels of PAHs and n-alkanes in seawater and sediment of the Nile delta coast of the Mediterranean were investigated using GC–MS/MS. The Σn-alkanes residues ranged between 12.05 and 93.51 mg/L (mean: 50.45 ± 17.49 mg/L) and 4.70 to 84.03 µg/g (mean: 31.02 ± 27.995 µg/g) in seawater and sediments, respectively. Total PAHs concentrations ranged between 4.485 and 16.337 μg/L (average: 9.47 ± 3.69 μg/L) and 1.32 to 28.38 ng/g (average 8.61 ± 7.57 ng/g) in seawater and sediment samples, respectively. The CPI (carbon preference index) values fluctuated between 0.62 and 1.72 (seawater) and from 0.234 to 2.175 (sediment), proposing the variation sources of n-alkane in the studied area. PAHs concentrations were lower than the Effective Range Low (ERL) and Effective Range Median (ERM) levels. The Toxic Equivalent Quotient (TEQ) values oscillated between 0.002 and 6.84 ng/L and from 3.72 to 13.48 ng/g for the seawater and sediment samples, respectively. The Ant/(Ant + Phe) ratio in sediment and seawater samples indicated a pyrolytic source while the BaA/(BaA + Chry) ratio indicates petrogenic sources in most of the studied stations.

Occurrence of Polycyclic Aromatic Hydrocarbons and Polychlorinated Biphenyls in Fogwater at Urban, Suburban, and Rural Sites in Northeast France between 2015 and 2021

Polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) exist in the atmosphere in the vapor and particulate phases, as well as in solubilized form in fog/rain/cloud waters. In the current paper, fogwater samples are collected during 42 events between 2015 and 2021 at four different sites (Strasbourg, Geispolsheim, Erstein, Cronenbourg) in the Alsace region. Organics are extracted using liquid–liquid extraction (LLE) supported on a solid cartridge (XTR Chromabond), and then analyzed by gas chromatography–tandem mass spectrometry (GC-MS/MS). The total PAHs and PCBs concentrations in fog samples vary between 0.58 and 6.7 µg L−1 (average of 2.70 µg L−1), and 0.14 and 15.5 µg L−1 (average of 2.75 µg L−1). Low-molecular-weight (LMW) PAHs are predominant and highly detectable compared to high-molecular-weight (HMW) PAHs, while pentachloro-biphenyls are the dominant PCB congener. The PAHs and PCBs concentrations have increased over the sampling years at all sites, except for a slight decrease in PCBs level at Geispolsheim. A diagnostic ratio (DR) and principal component analysis (PCA) are applied to suggest potential contamination sources at Strasbourg metropolitan. Their results reveal that PAHs derive from a mixture of pyrogenic activities, while PCBs mainly come from industrial activities. The results also reveal, in some cases, inter-site variability for simultaneous and successive fog events.

Concentrations, Sources and Health Risk Assessment of Polycyclic Aromatic Hydrocarbons in Chinese Herbal Medicines.

The determination and evaluation of 16 polycyclic aromatic hydrocarbons (PAHs) in seven Chinese herbal medicines (CHMs) were conducted through a rapid and straightforward extraction and purification method, coupled with GC-MS. A sample-based solid-phase extraction (SPE) pretreatment technique, incorporating isotopic internal standards, was employed for detecting various medicinal parts of CHMs. The assay exhibited linearity within the range of 5 to 500 ng/mL, with linear coefficients (R2) for PAHs exceeding 0.999. The recoveries of spiked standards ranged from 63.37% to 133.12%, with relative standard deviations (RSDs) ranging from 0.75% to 14.54%. The total PAH content varied from 176.906 to 1414.087 μg/kg. Among the 16 PAHs, phenanthrene (Phe) was consistently detected at the highest levels (47.045-168.640 μg/kg). Characteristic ratio analysis indicated that oil, coal, and biomass combustion were the primary sources of PAHs in CHMs. The health risk associated with CHMs was assessed using the lifetime carcinogenic risk approach, revealing potential health risks from the consumption of honeysuckle, while the health risks of consuming Lycium chinense berries were deemed negligible. For the other five CHMs (glycyrrhizae, Coix lacryma, ginseng, lotus seed, seed of Sterculia lychnophora), the health risk from consumption fell within acceptable ranges. Furthermore, sensitivity analyses utilizing Monte Carlo exposure assessment methods identified PAH levels in CHMs as health risk sensitizers. It is crucial to recognize that the consumption of herbal medicines is not a continuous process but entails potential health risks. Hence, the monitoring and risk assessment of PAH residues in CHMs demand careful attention.