Total Travel Time Of Passengers Research Articles

A conceptual non-stop operation strategy for urban rail transit: a case study of São Paulo’s monorail line

Purpose The purpose of this study is to address the extended travel time caused by dwelling time at stations for passengers on traditional rail transit lines. To mitigate this issue, the authors propose the “Non-stop” design, which involves trains comprised of modular vehicles that can couple and uncouple from each other during operation, thereby eliminating dwelling time at stations.. Design/methodology/approach The main contributions of this paper are threefold: first, to introduce the concept of non-stop rail transit lines, which, to the best of the authors’ knowledge, has not been researched in the literature; second, to develop a framework for the operation schedule of such a line; and third, the author evaluate the potential of its implementation in terms of total passenger travel time. Findings The total travel time was reduced by 6% to 32.91%. The results show that the savings were more significant for long commutes and low train occupancy rates. Research limitations/implications The non-stop system can improve existing lines without the need for the construction of additional facilities, but it requires technological advances for rolling stock. Originality/value To eliminate dwelling time at stations, the authors present the “Non-stop” design, which is based on trains composed of locomotives that couple and uncouple from each other during operation, which to the best of the authors’ knowledge has not been researched in the literature.

Cooperative Optimization of Bus-Subway-Shared Bicycle Based on Uncertainty Theory

This research considered the uncertainty of the operation time of shared bicycle, constructed the urban coupling network, and established the optimization model for the cooperative operation of conventional buses, subways and shared bikes. In the programming model, the optimization objective is to minimize the total travel time of passengers, and by optimizing and adjusting the departure intervals of conventional buses and subways as well as the stopping time of vehicles, the travel efficiency of passengers is improved. The interchange cooperative system composed of Nanchang Metro Line 1 and Bus 520 and the surrounding shared bicycle concentration area was taken as the case study. According to the optimization results, the passenger waiting time, passenger transfer time, and total passenger on-board time are effectively reduced by 21.5%, 23.2%, and 7.37%; ultimately, the total travel time is reduced by 8.2% at a confidence level of 95%. Case analyses show that the conventional bus stopping time has the greatest impact on the total travel time of the passengers as compared to the other variables. The research is of positive practical significance for promoting the efficient and coordinated development of urban transportation networks and facilitating the travel of residents.

Pareto Optimization of Energy-Saving Timetables Considering the Non-Parallel Operation of Multiple Trains on a Metro Line

In light of reducing train operation energy consumption while maintaining the passenger service level for creating sustainable urban rail transit systems, we address a non-parallel train timetabling problem considering regenerative braking energy utilization and the non-parallel operation of multiple trains on a metro line via a newly proposed multi-objective timetable (MOT) optimization model and an evolutionary algorithm based on NSGA-II. The optimization objectives of the MOT model are to find satisfactory energy-saving timetables on the Pareto frontier by minimizing the total travel time of passengers and minimizing the net energy consumption of trains. An improved multi-objective evolutionary algorithm based on NSGA-II is constructed to generate the optimal arrival and departure times at each station for each train running in a non-parallel operation mode. This study tests the feasibility of the proposed optimization method via an empirical case using the data collected from the Yizhuang Line of the Beijing metro systems in China. The simulation results show that the proposed optimization method satisfies both the energy utilization and passenger service levels along a Pareto front. The MOT improves the overall effectiveness of regenerative braking energy utilization by 29.88% in comparison with the original timetable; it reduces the net operation energy consumption by 44.86% relative to the travel-oriented timetable (TOT); and it reduces the total passenger travel time by 27.18% compared with the energy-oriented timetable (EOT).

Multi-Objective Optimization for High-Speed Railway Network Based on “Demand–Supply–Management” Model

This paper develops a multi-objective optimization model for national high-speed railway network planning. Three objectives are proposed from the macro, meso, and micro perspectives, and these three objectives are considered simultaneously. Using real data, case studies are conducted to optimize China’s “four east–west and four north–south railway lines” network, which includes Beijing, Shanghai, Wuhan, Guangzhou, and Zhengzhou as main hubs. The results show that, on the one hand, the optimization model reduces the overlap between long-distance passengers and short-distance passengers on the high-speed railway line, facilitates the travel of passengers, and improves the line service capability; on the other hand, optimization of the network shortens the travel time of the passengers, reduces the cost of the railway, and improves the operation efficiency of the high-speed railway line network. The results show that the total travel time of all high-speed railway passengers in the optimization model is reduced by 18.4%, while the benefit rate of the operator increased by 21.99%.

Bi-objective optimization of last-train timetabling with multimodal coordination in urban transportation

When urban rail transit (URT) does not provide 24-hour services, passengers who travel at late night may not be able to reach their destinations with only URT trains. As a result, passengers have to find alternative transport means, or combine URT trains with other transport services to fulfill their journeys. This paper investigates the integrated optimization of last train timetabling and bridging service design with consideration of passenger path choices. Two bridging services are considered: taxis and buses. Based on pre-constructed path sets, a bi-objective mixed-integer nonlinear programming (MINLP) model is developed, aiming at minimizing total passenger travel time and total passenger travel cost. To reduce the model scale and improve solution efficiency, three path dominance principles are proposed to remove redundant passenger paths without loss of optimality. An adaptive iterative algorithm is designed to obtain the Pareto frontier curve. The proposed model and solution methods are demonstrated on the Chengdu URT network. Results indicate that passenger travel costs and travel times can be significantly reduced by the integrated optimization. It also provides passengers with a safer night travel environment due to the reduction in passenger travel times in taxis.

A variable neighborhood search algorithm for a public bus line with a demand-responsive operation during peak hours

ABSTRACT In this study, we propose a variable neighborhood search (VNS) algorithm to optimize the performance of a single bus line during peak hours where the passenger flows in one direction are typically much larger than the flows in the opposite direction. The system we propose aims to increase the frequency of the service towards the city center during morning peak hours, by allowing some of the vehicles to perform short-cut trips away from the city center. Just before the morning peak hours and based on the expected demand, the VNS algorithm decides which buses should visit all the stops ahead or take a short-cut during its return trip. Experiments show that with the demand-responsive system, total passenger travel time improves about 10% on average for a real-size benchmark instance. The performance of the system is also analyzed under different fleet size and capacity, duration of peak hours, and demand scenarios.

Collaborative optimization for train stop planning and train timetabling on high-speed railways based on passenger demand.

In recent years, with increasing passenger travel demand, high-speed railways have developed rapidly. The stop planning and timetabling problems are the core contents of high-speed railway transport planning and have important practical significance for improving efficiency of passenger travel and railway operation Dong et al. (2020). This study proposes a collaborative optimization approach that can be divided into two phases. In the first phase, a mixed-integer nonlinear programming model is constructed to obtain a stop plan by minimizing the total passenger travel time. The constraints of passenger origin-destination (OD) demand, train capacity, and stop frequency are considered in the first phase. In the second phase, the train timetable is optimized after the stop plan is obtained. A multiobjective mixed-integer linear optimization model is formulated by minimizing the total train travel time and the deviation between the expected and actual departure times from the origin station for all trains. Multiple types of trains and more refined headways are considered in the timetabling model. Finally, the approach is applied to China's high-speed railway, and the GUROBI optimizer is used to solve the models in the above two stages. By analyzing the results, the total passenger travel time and train travel time decreased by 2.81% and 3.34% respectively. The proposed method generates a more efficient solution for the railway system.

Collaborative Optimization Model for the Design and Operation of Feeder Bus Routes Based on Urban Metro

The collaborative development of conventional buses and urban metro has become an important research topic for the priority development of urban public transport. The topic of collaborative optimization of feeder bus route design and operation is studied in this study. The objective function is to minimize the total travel time of passengers and the operation cost of feeder buses. The improved particle swarm optimization (PSO) algorithm is used to solve the collaborative optimization model, and the effectiveness of the model and algorithm is verified through the case study. The research shows that it is feasible in model construction and algorithm to carry out collaborative optimization of feeder bus route design and operation. Compared with the multiple-to-one (M to 1) mode, the multiple-to-multiple (M to M) mode can better satisfy the needs of passengers from different places of departure and destinations to achieve a more reasonable and realistic goal. The case study is based on two metro stations and 16 feeder bus stops on Fuzhou Metro line 2 to obtain two bus routes and a corresponding operation scheme. Under the same topology road network, the operation time of the improved PSO algorithm is much shorter than the DFS algorithm, the total cost error of the feeder bus is 0.04%, and the departure frequency error is 4.6%, which is within the reasonable error range. Therefore, the collaborative optimization model proposed in this study is feasible and effective in optimizing the feeder bus routes and operation.

Travel time, delay and reliability of ferry transportation across a waterway

This paper studies the journey time, delay, system reliability, vessel and passenger arrival patterns and their interdependence in six waterway transport (ferry) routes across a river. Deviations from average and buffer time indices (indicating reliability) are calculated for waiting delay, ferry journey and total travel time of passengers. Although the ferry journey is fairly reliable (6-19% deviations), large unreliability persists in waiting time (56-95% deviation). Intuitively, it decreases in locations with higher frequencies and passenger flow. Further, consistency in maintaining fixed frequency results in passengers remembering the schedule and arriving just in time, as observed statistically. A 50% hypothetical increase of frequency with fixed departures decreases the waiting delay by 29-59% and increases the reliability by 30-96%. The outcome of this paper can invigorate transportation operations over short waterway routes, as the result provides implications from the passengers’ and operators’ perspectives.

A multi-objective optimization model for green demand responsive airport shuttle scheduling with a stop location problem

<abstract> <p>We proposed a multi-objective optimization framework for green demand responsive airport shuttle scheduling, which simultaneously aims at assigning demand points to selected stops and routing airport shuttles to visit these stops in their overlapping time windows to transport all passengers from their homes or workplaces to the airport. Our objectives were to minimize total travel time for passengers, the punishment expense of violating the time-window as well as carbon emissions for all shuttles. Since such issues belongs to the NP-problem, a two-stage Multi-objective ant lion optimizer (MOALO)-based algorithm incorporating dynamic programming search method was developed to acquire the optimal scheduling schemes. Finally, a case study of airport shuttle service in Tianjin Airport, China, was used to demonstrate the validity of the model and algorithm.</p> </abstract>

Integrated Robust Optimization of Scheduling and Signal Timing for Bus Rapid Transit

The unbalanced nature of passenger demand and the uncertainty of delay at intersections are considered critical factors in the efficiency of public transportation operations. Considering the controllable characteristics of the bus rapid transit system (BRT), an integrated optimization model that includes multi-mode transit scheduling and signal timing is proposed. The robust optimization model copes with the fluctuations in passenger demand and bus operation. A non-linear programming is developed to minimize the total passenger travel time and optimize the transit departure time, dwelling strategies at stations, and signal timings at intersections. The constraints on the signal control, degree of saturation, transit scheduling, and passenger waiting time at stations are intended to reflect real traffic conditions. A case study and extensive sensitivity analyses were conducted to evaluate the performance of the proposed model. The results show that the proposed integrated model can adjust the BRT dwelling strategies based on different passenger demands and coordinate transit departure time and signal timing adjustment to mitigate the passenger delay. Furthermore, experimental results demonstrate improvements of 5.3% and 8.1% in the mean and maximum values of passenger travel time, respectively, using the proposed model, compared to those obtained using the conventional operation strategy.

An Integrated Multi-Objective Optimization for Dynamic Airport Shuttle Bus Location, Route Design and Departure Frequency Setting Problem.

An airport shuttle bus (ASB), as an environmentally friendly mode of green transportation, is an effective way to solve the "first/last mile" of aviation passengers, which can attract a higher passenger transfer from private cars to public transport, thereby reducing emissions of carbon dioxide and other polluting gases. This study presents a multi-objective mixed-integer linear programming for ASB services in a dynamic environment. Taking into account time-varying demand and travel time characteristics in different periods, the proposed model provides a comprehensive framework that simultaneously advises passengers to join the bus at the nearest bus stations, designs routes for transporting them from these selected stations through the airport, and computes their departure frequencies in multiple periods. The primary objective is to optimize both the total ride time and waiting time for all passengers. The secondary objective is to optimize the total transfer distance of all passengers simultaneously. Given the Non-Deterministic Polynomial (NP) hardness of this problem, a two-stage multi-objective heuristic approach based on the non-dominated sorting genetic algorithm (NSGA-II) is combined with a dynamic programming search method and further advanced to obtain the Pareto-optimal solutions of the proposed model within a reasonable time. Finally, the proposed model and algorithm feasibility are proved by a test example of designing a shuttle bus route and schedule at Tianjin Airport, China. The results show that the total passenger travel time of the presented model is markedly reduced by 1.21% compared with the conventional model.

Bus Scheduling of Overlapping Routes Based on the Combination of All-Stop and Stop-Skipping Services

Developing public transportation is an effective way to alleviate traffic congestion and reduce fossil fuel consumption. However, the result of ineffective public transport planning can be that some bus lines have long overlapping intervals, and share many common stops between them, which causes a significant waste of resources. The current bus scheduling method does not consider the imbalance of passenger flow between different stops or combine the overlapping interval with transit mixed scheduling, including all-stop and stop-skipping services. Therefore, based on the analysis of the characteristics of overlapping interval, this paper proposes a combined bus scheduling method, which includes both all-stop and stop-skipping bus services. The method is a deterministic method applied in the scheduling stage of transit planning. The method optimizes scheduling strategies by minimizing total passenger travel time, including the waiting time and the in-vehicle travel time, and the line frequency of each bus service is taken as the decision variable. Then a genetic algorithm is designed to find the optimal solution. The model is verified by two bus lines in Changchun city. The experimental results showed that the proposed model could reduce total passenger travel time by 7.71% compared with the existing scheduling method. The combined bus scheduling method can supplement the research on bus scheduling of overlapping routes and provide suggestions for operators.

A capacity adaption optimization model for supernormal operation of urban rail transit networks

In response to urban rail transit capacity shortage, a capacity adaption optimization model for the new mixed train operation mode is proposed in the supernormal operation of urban rail transit networks. First, the characteristics of express-local train and long-short route slow train are analyzed to obtain the main influencing factors of capacity adaption. Moreover, various train types are simultaneously classified and recombined in the adaption train operation mode to maximize transportation capacity for passengers. A nonlinear mixed-integer programming model is established to maximize the total number of trains, improving train load rate and reducing the total passenger travel time. In addition, the actual case of Beijing Metro Line 1 is solved to demonstrate the feasibility and effectiveness of the proposed model. The optimal passenger travel time-saving rates of the morning and evening peak hours are 12.1% and 11.5%, respectively. The optimal utilization rates of capacity in the morning and evening peak hours are 79.5% and 84.5%, respectively. Meanwhile, the optimal load factor within the range of 0.7–0.9 would benefit the utilization of train resources and the passengers’ service level. The optimized results show that the proposed capacity adaption optimization model benefits for high service level and practical significance and rationality for operators.

Optimization of New Energy Public Transportation Network Based on Ant Colony Algorithm and Low-Carbon Concept

In order to solve the optimization of new energy bus line network, a new energy bus line network based on ant colony algorithm and low-carbon concept is proposed. Firstly, the model of public transport network is established combined with OD matrix, and the improved ant colony algorithm is used to iteratively optimize the initial suboptimal route set, optimize the objective function, and finally obtain the optimal public transport route set. Secondly, the improved ant colony algorithm based on simulated annealing solves the design of public transport network, and the optimization scheme greatly reduces the number of passenger transfers and the total travel time of passengers. Finally, simulated annealing algorithm, basic ant colony algorithm, and simulated annealing improved ant colony algorithm are used to optimize the objective function. It is proved that the improved ant colony algorithm of simulated annealing can find the optimal solution of the three algorithms when solving the problem of public transport network design, which is better than the solution of basic ant colony and simulated annealing algorithm. The solution efficiency is 10.6 times that of simulated annealing algorithm and 3.5 times that of basic ant colony algorithm.

Novel model for integrated demand-responsive transit service considering rail transit schedule.

This research aims to develop an optimization model for optimizing demand-responsive transit (DRT) services. These services can not only direct passengers to reach their nearest bus stops but also transport them to connecting stops on major transit systems at selected bus stops. The proposed methodology is characterized by service time windows and selected metro schedules when passengers place a personalized travel order. In addition, synchronous transfers between shuttles and feeder buses were fully considered regarding transit problems. Aiming at optimizing the total travel time of passengers, a mixed-integer linear programming model was established, which includes vehicle ride time from pickup locations to drop-off locations and passenger wait time during transfer travels. Since this model is commonly known as an NP-hard problem, a new two-stage heuristic using the ant colony algorithm (ACO) was developed in this study to efficiently achieve the meta-optimal solution of the model within a reasonable time. Furthermore, a case study in Chongqing, China, shows that compared with conventional models, the developed model was more efficient formaking passenger, route and operation plans, and it could reduce the total travel time of passengers.

Joint optimisation of regular and demand-responsive transit services

This study aims to jointly optimise regular and demand responsive transit (DRT) services, which can offer opportunities for leveraging on their respective advantages. An optimisation model with the objective of minimising the total travel time of passengers and the total fleet size is proposed. The terminal bus stops of regular bus lines, the service area of the DRT, and the fleet size of both regular and DRT are optimised simultaneously. A rule-based optimisation preparation step is added to the proposed model to obtain a reasonable design scheme and to reduce the computational load. The model is solved using a tailored boundary-start-based two-step heuristic algorithm. The performance of the mixed network is affected by the preference of the decision maker and the operation mode adopted for the DRT service. A reduction in the operational level of the DRT results in a considerable increase in the travel time of DRT passengers.

Optimization of Stop Plan for Skip-Stop Operation on Suburban Railway Line

A combination of express and local trains (E/L mode) is generally used to operate a suburban rail service, it can meet the rapid and direct service needs of long-distance travelers as well the needs of short-distance travelers. Generally, a stop plan is the core of the E/L mode. A stop plan optimization model in E/L mode, which aims to minimize the total passenger travel time and the number of operating trains during the peak period with the safe headway and departure frequency constraints, is proposed in this study. Meanwhile, an algorithm based on a genetic algorithm is designed to solve the proposed model. A case study of the Jiangjin Line, a suburban railway in Chongqing, China, is carried out. The results show the efficiency and feasibility of the proposed method. The calculation results also show that the total passenger travel time under E/L mode with the overtaking condition is significantly reduced compared with the all-stops (AS) mode and E/L mode without overtaking condition. The superiority of the E/L mode can be enhanced by reducing the dwell time at stations and adopting the overtaking condition.

A Multi-Objective Meta-Heuristic Approach to Improve the Bus Transit Network: A Case Study of Fargo-Moorhead Area

In this study, the Transit Network Design Problem (TNDP) is studied to determine the set of routes and frequency on each route for public transportation systems. To ensure the important concerns of planners like route length, route configuration, demand satisfaction, and attractiveness of the transit routes, the TNDP is solved to generate a set of routes by proposing an initial route set generation (IRSG) procedure embedded into the NSGA-II algorithm. The proposed IRSG algorithm aims to produce high-quality initial route set solutions to reach better optimization procedures. Moreover, the Multi-Objective Mixed-Integer Non-Linear Programming (MOMINLP) model is proposed to formulate the frequency setting problem on each route by minimizing the total travel time of passengers (user costs) and operator costs simultaneously, while maximizing the service coverage area near all the bus stops. The MOMINLP model is solved by applying the NSGA-II algorithm to produce a Pareto front between the first and the second objective functions. The model was applied to the Fargo-Moorhead Area (FMA), a small urban area. Results were compared with the existing transit network to measure the efficiency of the NSGA-II solution methodology. The proposed algorithm was found to considerably decrease the total travel time of passengers.

Optimization of single-line bus timetables considering time-dependent travel times: A case study of Beijing, China

Bus timetables play an important role in improving the level of service and reducing operations costs of a bus transit system. Without dedicated bus lanes, bus travel times, which are important input data for bus timetabling, are usually time-dependent due to recurrent traffic congestion. However, few studies on bus timetabling have explicitly considered such travel time time-dependency in creating timetables. This paper addresses the problem of how to optimally modify an existing single-line bus timetable by slightly shifting vehicle departure times at the departure terminal and holding vehicles at other stops taking into account time-dependent travel times. The problem is mathematically formulated as a nonlinear programming model. According to the special structure and properties of the model, a derivative-free constrained compass search algorithm with revised step-size updating rule is applied to solve it. A case study of a bus line in Beijing, China is conducted to demonstrate the effectiveness and efficiency of the proposed model and solution algorithm. The case study results show that by utilizing the proposed methodology the optimized bus timetable can significantly reduce the total passenger travel time and improve ridership comfort, while rarely increasing the average vehicle cycle time. This study offers a promising and practical methodology for optimizing single-line bus service taking into account time-dependent travel times.