Total Number Of Microplastics Research Articles

Risk assessment of cigarette butts and microplastic pollution in a drinking and irrigation water basin of West Anatolia, Türkiye.

Cigarette butts (CBs) and Microplastics (MPs) have serious harmful effects on the environment and living organisms despite their small size. This research aims to investigate the abundance and pollution status of CBs and MPs in Tahtalı Dam Basin (West Anatolia, Türkiye) which is the most important drinking and irrigation water resources. Clean Environment Index (CEI) and Cigarette Butt Pollution Index (CBPI) were used to determine pollution degree of the basin. The total number of CBs were 1.478 items, the total number of MPs were 477 items/m2 in the basin. As a result of this study, MP particles weren't found in Balaban Stream. Highest number of MP particles observed in 100-250μm (45%) size class. The most abundant MP type and colour were, fragment (54%) and white (42%), respectively. Polyethylene terephthalate (50%) was the most abundant type of polymer according to the ATR- FTIR analysis. As a result of the CEI and CBPI, the upstream stations of the stream were classified as "clean" status, while downstream sampling points of the stream and Balaban Lake coasts were classified as "extremely dirty" status. The calculated volumes of MP particulates from mining facility, agricultural and recreational activities indicate that anthropogenic factors are the most important MP source in the Tahtalı Dam Basin. This study is the first study about MP and CB pollution of the freshwater ecosystems in the region.

Basin scale monitoring of microplastics and phthalates in sediments from the Persian Gulf and the Gulf of Makran using GIS-based algorithms: Insights towards spatial variation and potential risk assessment

Information on sedimentary microplastics and phthalates has been restricted to the coastal regions of the Persian Gulf and the Gulf of Makran. Our basin-wide study monitored their levels, spatial behaviors, and potential risks using GIS-based techniques. Microplastics and phthalates ranged from 5 to 75 particles/kg d.w and 0.004–1.219 μg g−1 d.w, respectively. Microplastics were in the size category of 100 μm to 3 mm, and black microfibers (< 1 mm) and high-density polymers were dominant. The total number of microplastics was between 356.333 × 1012 and 469.075 × 1012 particles in the surface sediments of the studied regions (confidence interval = 99 %). Diethylhexyl phthalate (DEHP) and Di-isobutyl phthalate contributed 88 % of detected phthalates. Significant correlations among microplastic abundance, total phthalates, and DEHP were distinguished (p < 0.05). Overall, the findings reiterated the widespread presence of microplastics and a potential link between phthalates and microplastics. Semi-variogram, cluster Voronoi polygons, and Trend analysis identified spatial outliers and major deposition sites of microplastics and phthalates and consequently outlined the localities where upcoming studies should be concentrated. A hotspot of potential risks was marked using Fuzzy logic and GIS-based algorithms in the Sea of Makran, covering an area equal to 342. 99 km2.

Robinia pseudoacacia L. (Black Locust) Leaflets as Biomonitors of Airborne Microplastics.

Here we investigate the suitability of Robinia pseudoacacia L. (black locust) leaflets as a novel biomonitor of airborne microplastics (MPs) including tyre wear particles (TWPs). Leaflets were collected from rural roadside locations (ROs, n = 5) and urban parks (UPs, n = 5) in Siena, Italy. MPs were removed by washing, identified by stereomicroscope, and analysed for polymer type by Fourier transform infrared spectroscopy. Daily MP deposition was estimated from leaf area. The mass magnetic susceptibility and the bioaccumulation of traffic-related potentially toxic elements (PTEs) were also analysed. The total number of MPs at ROs was significantly higher at 2962, dominated by TWPs, compared with 193 in UPs, where TWPs were not found. In contrast, total microfibres were significantly higher in UPs compared with ROs (185 vs. 86). Daily MP deposition was estimated to range from 4.2 to 5.1 MPs/m2/d across UPs and 29.9-457.6 MPs/m2/d across ROs. The polymer types at ROs were dominated by rubber (80%) from TWPs, followed by 15% polyamide (PA) and 5% polysulfone (PES), while in UPs the proportion of PES (44%) was higher than PA (22%) and polyacrylonitrile (11%). The mean mass magnetic susceptibility, a proxy of the bioaccumulation of traffic-related metallic particles, was higher at ROs (0.62 ± 0.01 10-8 m3/kg) than at UPs (-0.50 ± 0.03 10-8 m3/kg). The content of PTEs was similar across sites, except for significantly higher concentrations of Sb, a tracer of vehicle brake wear, at ROs (0.308 ± 0.008 µg/g) compared with UPs (0.054 ± 0.006 µg/g). Our results suggest that the waxy leaflets and easy determination of surface area make Robinia an effective biomonitor for airborne MPs including TWPs.

Quantitative assessment of microplastic contamination in muddy shores of Gulf of Khambhat, India

Microplastics (MPs) have become a global concern due to their widespread distribution in marine ecosystems. The present study was aimed to assess MPs contamination in 21 muddy shores sites situated in the Gulf of Khambhat. From each site, five samples (1 kg each) were collected. In the laboratory, the replicates were homogenated, out of which a 100 g sample was used for analysis. The total number of MPs, shape, colour, size and polymer composition of MPs were assessed. The MPs abundance ranged from 0.32 ± 0.18 particles/g (Jampore) to 2.81 ± 0.50 particles/g (Uncha Kotda) among different study sites. Moreover, threads were recorded maximum followed by films, foams and fragments. In case of MPs colour, black and blue coloured MPs occurred dominantly, with sizes ranging from 1 mm to 5 mm. FTIR analysis identified seven different types of plastic polymers, out of which polypropylene was the dominant plastic polymer (32.46 %) followed by polyurethane (32.16 %), acrylonitrile butadiene styrene (14.93 %), polystyrene (9.62 %), polyethylene terephthalate (4.61 %), polyethylene (3.71 %) and polyvinyl chloride (2.51 %). Based on the results of the Contamination factor (CF) value, Alang, Mahua, Ghogha and Uncha Kotda were identified as very high contaminated sites (CF ≥ 6). Pollution Load Index (PLI) value of entire study area revealed the Gulf of Khambhat as a polluted area with MPs contamination (PLI > 1). While value of Hazardous Index (H) identified 12 study sites as class-V risk category (H value > 10,000). Moreover, Pollution Risk Index (PRI) value revealed fifteen sites as very high contaminated sites (PRI > 1200). Pollution indices can be useful in predicting the level of MPs contamination at the study site. Overall, the present study provides the information on MPs contamination in the coastal region of the Gulf of Khambhat that can be used as a baseline data for future studies on the ecotoxicity of MPs on marine biota.

Microplastic contamination of coastal hill soils: Perspective of Rohingya Refugee camps in Bangladesh

ABSTRACT Microplastics (MPs) pollution of environments due to human activities is a global concern. In the present study, we examined the occurrence of MPs in coastal hill soils (burned and non-burned) collected from the Rohingya Refugee camps in Cox’s Bazar, Bangladesh. The total number of MPs per kg of burned soil (402–403 items/kg) sample was significantly higher than that in non-burned soil (210 items/kg) sample. Fibers (24–57%) dominated in all the samples, followed by fragments (18–51%), sheet (12–29%), and microbeads (12–13%). The most common color of MPs was blue (16–68%), followed by red (14–25%), transparent (14–24%) and brown (14–22%). Among the size groups, MPs of 0.5-<1.0 mm (34–44%) dominated in all the samples, followed by 1.0–5.0 mm (27–45%) and <0.5 mm (14–29%). Attenuated Total Reflectance Fourier Transform Infrared spectroscopy analysis confirmed the most abundant polymer type in burned soil was polystyrene (28%) followed by polypropylene (23%), polyethylene (21%), polyamide (15%), ethylene-vinyl acetate (8%), and polyvinyl chloride (3%). The study confirms the presence of high MPs loads in burned soil, with high potential of trophic transfer to plants and washed out to aquatic environment and will appear as base line information for further assessment of MPs effects on biota.

Macro- and microplastic accumulation in soil after 32 years of plastic film mulching

Plastic film mulch (PFM) is a double-edged-sword agricultural technology, which greatly improves global agricultural production but can also cause severe plastic pollution of the environment. Here, we characterized and quantified the amount of macro- and micro-plastics accumulated after 32 years of continuous plastic mulch film use in an agricultural field. An interactive field trial was established in 1987, where the effect of plastic mulching and N fertilization on maize yield was investigated. We assessed the abundance and type of macroplastics (>5 mm) at 0–20 cm soil depth and microplastic (<5 mm) at 0–100 cm depth. In the PFM plot, we found about 10 times more macroplastic particles in the fertilized plots than in the non-fertilized plots (6796 vs 653 pieces/m2), and the amount of film microplastics was about twice as abundant in the fertilized plots than in the non-fertilized plots (3.7 × 106 vs 2.2 × 106 particles/kg soil). These differences can be explained by entanglement of plastics with plant roots and stems, which made it more difficult to remove plastic film after harvest. Macroplastics consisted mainly of films, while microplastics consisted of films, fibers, and granules, with the films being identified as polyethylene originating from the plastic mulch films. Plastic mulch films contributed 33%–56% to the total microplastics in 0–100 cm depth. The total number of microplastics in the topsoil (0–10 cm) ranged as 7183–10,586 particles/kg, with an average of 8885 particles/kg. In the deep subsoil (80–100 cm) the plastic concentration ranged as 2268–3529 particles/kg, with an average of 2899 particles/kg. Long-term use of plastic mulch films caused considerable pollution of not only surface, but also subsurface soil. Migration of plastic to deeper soil layers makes removal and remediation more difficult, implying that the plastic pollution legacy will remain in soil for centuries.

Fourier transform infrared (FTIR) analysis identifies microplastics in stranded common dolphins (Delphinus delphis) from New Zealand waters

Here we provide a first assessment of microplastics (MPs) in stomach contents of 15 common dolphins (Delphinus delphis) from both single and mass stranding events along the New Zealand coast between 2019 and 2020. MPs were observed in all examined individuals, with an average of 7.8 pieces per stomach. Most MPs were fragments (77%, n = 90) as opposed to fibres (23%, n = 27), with translucent/clear (46%) the most prevalent colour. Fourier transform infrared (FTIR) spectroscopy revealed polyethylene terephthalate (65%) as the most predominant polymer in fibres, whereas polypropylene (31%) and acrylonitrile butadiene styrene (20%) were more frequently recorded as fragments. Mean fragment and fibre size was 584 μm and 1567 μm, respectively. No correlation between total number of MPs and biological parameters (total body length, age, sexual maturity, axillary girth, or blubber thickness) was observed, with similar levels of MPs observed between each of the mass stranding events. Considering MPs are being increasingly linked to a wide range of deleterious effects across taxa, these findings in a typically pelagic marine sentinel species warrants further investigation.

Karakteristik Mikroplastik pada Daerah Feeding Ground Pari Manta, Big Manta Bay, Nusa Penida

Microplastic, the pieces of plastic sized &lt; 5 mm, are dangerous materials for marine organisms where if is ingested can anatomically and physiogically change the marine organism. Manta rays (Mobula alfredi) are filter feeders where they eat planktons and small fishes by filtering seawater. Mantas can filter up to hundreds cubic meter everyday, indicating the chances of it ingesting microplastics. This research was conducted to find out the microplastic characteristics at Big Manta Bay, Nusa Penida. Samples were obtained at two sites, North and South Big Manta Bay, by trawling 6 times on each site that represents Big Manta Bay using a plankton net. Samples were processed by separating plastics and organic matters using density separation method, and afterwards identified based on its type, quantity and size using a dissecting microscope. Results from the research came back stating the microplastic abundance reached 123,767 pieces/km2, with a total number of microplastics up to 174 pcs. The types of plastics most frequently found are fragments (44,69%), films (38,55%), fiber (14,53%) and foam (2,23%). Samples were also analysed using FTI-R Spectrometry, where plastics are identified as Polypropylene (PP) and Low-density Polyethylene (LDPE). Both polymers are the top two polymers that are produced globally.

Spatial distribution of microplastics in the superficial sediment of a mangrove in Southeast Brazil: A comparison between fringe and basin

The presence of microplastics (MPs) has been observed globally in every marine environment, including mangroves. However, the distribution of MPs in mangroves comparing fringe and basin forests and their ecological consequences need be better investigated. The objectives of this study were to verify the presence, distribution and types of MPs in a mangrove area in southeast Brazil. Further, we linked the presence of vegetation and urban activities with MPs presence at these sites. Eight mangrove sites in Vitória Bay were delimited and classified as fringe or basin, totaling 16 sample points. Superficial sediments were collected, then MPs classified and quantified by shapes and colors. A total of 2175 MPs were observed in the mangrove basin and fringe of sites analyzed (66.4% and 33.6%, respectively), suggesting high levels of MPs in basin sites. The color proportion of MPs found was blue (54%), transparent (21%), black (10%), red and green (6% each) and yellow and white (<1% each). Filaments accounted for 88.7% of the total, compared with 11.3% from fragments. The majority of MPs were found at the basin sites with less preserved vegetation. A positive correlation was found between the total number of MPs and the density of dead vegetation, indicating that degraded environments are more susceptible to MP accumulation. Thus, our data suggest that MPs are widely distributed and associated with lower hydrodynamism (basin region), less preserved vegetation and urban activities.

The accumulation of microplastics in fish from an important fish farm and mariculture area, Haizhou Bay, China

Marine fisheries and aquaculture can match growing demand for marine protein from an increasing population. However, the microplastics (MPs) in marine environments may pose a threat to human health through food chains by seafood consumption. The MPs have been found lodged in the digestive tracts and other tissues of various sea animals, nevertheless, little is known in regard to the accumulation of MPs in fish from major fish farms and mariculture areas, especially in non-digestive tissues of fishes. This study investigated the accumulation of MPs in six major wild fish species (including Thryssa kammalensis, Amblychaeturichthys hexanema, Odontamblyopus rubicundus, Cynoglossus semilaevis, Chaeturichthys stigmatias and Collichthys lucidus), both in digestive and non-digestive tissues, from an important fish farm and mariculture area, Haizhou Bay, China. All fishes had items that were identified as MPs. The highest abundance of MPs was 22.21±1.70items/individual or 11.19±1.28items/g in T. kammalensis, which is filter-feeding and usually inhabits in estuary. The lowest abundance of MPs was observed in C. semilaevis (13.54±2.09items/individual) and C. stigmatias (1.61±0.56items/g). The abundance of MPs exponentially increased with the decrease of MPs size. The MPs were dominated by fiber in shape, black or grey in colour and cellophane in composition. As to different tissues, the total number of MPs on skin (800) or in gills (746) was higher than that in gut (514). In terms of skin, the abundances of MPs in three species of scaleless fish with mucus (A. hexanema, C. stigmatias and O. rubicundus) were generally higher than other three fishes with scales (C. lucidus, C. semilaevis and T. kammalensis), implying the potential high risk of scaleless fish consumption for human health in Haizhou Bay. More in-depth studies need to focus on the scaleless fish through mucus adsorbing enormous MPs.

Microplastics in freshwater sediments of Atoyac River basin, Puebla City, Mexico

Microplastics (MPs) are contaminants of emerging concern in aquatic environments. The abundance, distribution and characteristics (color, morphology, texture) of MPs from Atoyac River basin, a highly urbanized river system located in Central Mexico were investigated in this study. The sediment samples were collected from 29 different sites along the Atoyac River basin in four different zones: Zahuapan River, Atoyac River, Confluence zone and Valsequillo dam and processed for MPs extraction using ZnCl2 density separation method. The total number of MPs in Zahuapan River, Atoyac River, Confluence zone and Valsequillo dam was 1633.34 ± 202.56, 1133.33 ± 72.76, 833.33 ± 80.79 and 900 ± 346.12 items kg−1 respectively. It was found that the concentration of MPs is higher in the downstream section of the river (confluence zone: 833.33 ± 80.79 & Valsequillo dam: 900 ± 346.12 items kg−1), revealing significant impacts of dense population and industrial complex of Puebla City. Colored MPs were predominant accounting for 51% and white MPs for 49% of the total MPs. Films (25.9%) and fragments (22.2%) were the most abundant type followed by fibers (14.8%). Scanning electron microscope images revealed varying disintegration features and energy-dispersive X-ray spectra demonstrated the presence of different metal elements on the surface of MPs. The results highlighted the widespread distribution of MPs in the sediments of Atoyac River basin, Mexico.

Impacts of macro - and microplastic on macrozoobenthos abundance in intertidal zone

Plastics pollution in coastal areas is one of the topics that have received more attention over the past few years. The intertidal zone is a waters area that is directly affected by contamination of plastic waste from land and sea. The purpose of this study was to analyze the types and abundance of plastic waste in the intertidal zone and its impact on macrozoobenthos abundance. This research was conducted at Pesisir Desa Jaring Halus in February-April 2017. Macrozoobenthos and macro - micro plastic were collected by using quadratic transect. Sediments were collected with a core, to a depth of 30 cm. Microplastic and macroplastic abundances were analyzed using separation of sediment density and hand sorting. The dominant micro plastic types were film (52.30%), fiber (24.88%), fragments (22.74%), followed by pellets (0.1%). The total number of microplastics were 326,33 items and macro plastic were 308 items. Macroplastic abundance is positively correlated with microplastic (0.765). The abundance of macrozoobenthos is negatively correlated with microplastic abundance (-0.368) and with macro plastic abundance (-0.633). The management strategies were suggested clean up marine debris, decrease plastic using and built up the station of debris processing.