Total Molecular Weight Research Articles

Characterization of Cytotoxic Lactose Binding Lectin from Sulphur Polypore, Laetiporus sulphureus (Agaricomycetes), from Algeria.

Mushroom lectins have important biological and biomedical applications. Most lectins purified from these organisms exhibit high toxicity in animal cells and toward microbial agents. They are able to induce cell growth inhibition and metabolism by their ability to interact with glyconjugate components (glycoproteins receptors, glycolipids) present in their membrane. After lectins bind to these membrane receptors, they induce cellular signalization chains in which gene expression is regulated and cell death programming (apoptosis) is activated. In this work, a new multimeric lectin was characterized from the rare saprobic edible mushroom, Laetiporus sulphureus strain TMES43, grown in the Algerian forest. Lectin was isolated with ammonium sulfate precipitation followed by affinity chromatography on a Sepharose 4B column, with specific activity of 1204.7 units of hemagglutination activity/mg and 35.55% yield. The protein has a tetrameric structure with a molecular weight of 36 kDa for each subunit, with a total molecular weight of approximately 140 kDa. In addition, a Mascot peptide fingerprint study on a matrix-assisted laser desorption ionization-time of flight tandem fragment showed identity with autophagy-related protein 16 from Meyerozyma guilliermondii (strain ATCC 6260/CBS 566/DSM 6381/JCM 1539/NBRC 10279/NRRL Y-324; Expasy ID: ATG16_PICGU) and no sequence similarity to known mushroom lectins. L. sulphureus hemagglutination activity was reduced by 5 mM of lactose and 10 mM of EDTA incubation and was recovered by metallic cations such as CaCl2, MgCl2, and ZnCl2. L. sulphureus purified lectin had no human ABO group specificity and showed low temperature and alkaline pH stabilities. The MTT preliminary assay showed that L. sulphureus purified lectin induced high cytotoxicity for tumor cells and normal cells.

Cytotoxic Effect of Bee (A. mellifera) Venom on Cancer Cell Lines.

ObjectivesNowadays cancer treatment is an important challenge in the medical world that needs better therapies. Many active secretions produced by insects such as honey bees used to discover new anticancer drugs. Bee venom (BV) has a potent anti inflammatory, anti cancer and tumor effects. The aim of present study is evaluation of anticancer effects induced by Apis mellifera venom (AmV) on cell Lines.MethodsAmV was selected for study on cancer cell lines. Total protein, molecular weight and LD50 of crude venom were determined. Then, cells were grown in Dulbecco’s Modified Eagle medium supplemented with 10% fetal bovine serum and 1% antibiotics. The A549, HeLa and MDA-MB-231 cell Lines were exposed by different concentration of AmV. The morphology of cells was determined and cell viability was studed by MTT assay. Evaluation of cell death was determined by and DNA fragmentation.ResultsThe results from MTT assay showed that 3.125 µg/mL of A549, 12.5 for HeLa and 6.25 µg/mL of MDA-MB-231 killed 50% of cells (p < 0.05). Morphological analysis and the results from hoescht staining and DNA fragmentation indicated that cell death induced by AmV was significantly apoptosis.ConclusionThe data showed that using lower dosage of AmV during treatment period cause inhibition of proliferation in time and dose dependant manner. Findings indicated that some ingredients of AmV have anticancer effects and with further investigation it can be used in production of anticancer drugs.

Anaerobic biological treatment of EG/PG water-soluble copolymer coupled with down-flow hanging sponge reactor

Water-soluble copolymers such as polyvinylpyrrolidone and polyvinyl alcohol have been widely used as detergents, paints, and chemical intermediates in many industrial processes, leading to environmental concerns associated with high-volume organic compound wastewater. Therefore, in this study, a combined upflow anaerobic sludge blanket (UASB) reactor and downflow hanging sponge (DHS) biosystem has been applied for the treatment of synthetic water-soluble copolymer wastewater. Copolymer consisted of ethylene glycol and propylene glycol with a total molecular weight of 8,500, commonly preferred in the automobile parts processing factory, were included in influent. Overall, the whole UASB–DHS system achieved a favorable chemical oxygen demand (COD) removal efficiency of 86% ± 7%. In more detail, with an organic loading rate of 2.12 kg-COD ⋅ m −3 ⋅ day −1 , the UASB reactor enhanced the biodegradability of wastewater, and reached COD removal efficiency of 61% ± 16%. Meanwhile, gel permeation chromatography analysis indicated that the molecular weight of the wastewater was primarily reduced in the DHS reactor. In addition, massive 16S rRNA gene sequencing showed that polyethylene-glycol-degrading bacteria Pelobacter sp. was predominant in the UASB granular sludge. • First report on integrated biological treatment of water-soluble copolymers. • UASB reactor after adaptation can recover energy in the form of methane. • Total system achieved chemical oxygen demand removal efficiency of 86% ±7%. • Molecular weight reduction in the process was mainly occurred in the DHS. • UASB-DHS system was applicable to this wastewater.

Molecular-weight and cooling-rate dependence of polymer thermodynamics in molecular dynamics simulation

Molecular dynamics (MD) simulations are conducted to systematically benchmark the effects of molecular weight, chain number, and cooling rate on the glass transition temperature (Tg) and coefficient of thermal expansion (CTE) of poly(ethylene oxide) (PEO). Hyperbolic regression as an objective identified method is used to extract Tg and CTE. The results show that for a cooling rate higher than 5 × 1013 K/min, Tg and CTE are both strongly affected by rapid quenching. For a cooling rate lower than 5 × 1013 K/min, Tg and CTE in the high-temperature domain still slightly depend on the cooling rate. Eventually, to eliminate the finite size effect of the model, a threshold molecular weight of 11,240 g/mol should be satisfied in the system. In addition, the chain number must be more than 10, at least for an oligomer system (50 monomers). This study comprehensively reveal the critical parameters of poly(ethylene oxide) (PEO) in the MD simulation that causes the numerical effect on polymer simulation and the variation of thermodynamics property. The threshold value of total molecular weight of 11,240 g/mol must be satisfied, which leads the polymer that exhibits its steady state bulk properties. For the oligomer system (Mw < 2248 g/mol per chain (50 monomers)), the total chain number must be more than 10 at least. The cooling rate must be lower than 5 × 1013 K/min for the structural equilibrium.

In Situ Growth of AuNPs on Glass Nanofibers for SERS Sensors.

It is challenging to fabricate plasmonic nanosensors on high-curvature surfaces with high sensitivity and reproducibility at low cost. Here, we report a facile and straightforward strategy, based on an in situ growth technique, for fabricating glass nanofibers covered by asymmetric gold nanoparticles (AuNPs) with tunable morphologies and adjustable spacings, leading to much improved surface-enhanced Raman scattering (SERS) sensitivity because of hotspots generated by the AuNP surface irregularities and adjacent AuNP coupling. First, nanosensors covered with uniform and well-dispersed citrate-capped spherical AuNPs were constructed using a polystyrene-b-poly(4-vinylpyridine) (PS-P4VP, with 33 mol % P4VP content and 61 kg/mol total molecular weight) block copolymer brush-layer templating method, and then, the deposited AuNPs were grown to asymmetric AuNPs. AuNP morphologies and hence the optical characteristics of AuNP-covered glass nanofibers were easily controlled by the choice of experimental parameters, such as the growth time and growth solution composition. In particular, tunable AuNP average diameters between about 40 and 80 nm with AuNP spacings between about 50 and 1 nm were achieved within 15 min of growth. The SERS sensitivity of branched AuNP-covered nanofibers (3 min growth time) was demonstrated to be more than threefold more intense than that of the original spherical AuNP-covered nanofibers using a 633 nm laser. Finite-difference time-domain simulations were performed, showing that the electric field enhancement is highest for intermediate AuNP diameters. Furthermore, SERS applications of these nanosensors for H2O2 detection and pH sensing were demonstrated, offering appealing and promising candidates for real-time monitoring of extra/intracellular species in vitro and in vivo.

Purification and characterization of novel exopolysaccharides produced from Lactobacillus paraplantarum KM1 isolated from human milk and its cytotoxicity

BackgroundMicrobial origin polysaccharides have gained popularity due to lesser toxicity, better degradability and selectivity as compared to their synthetic counterparts and can be used as emulsifier, stabilizer, thickener, texturizer, flocculating and gelling agent. Here main emphasis on exopolysaccharide production from potential lactic acid bacteria that has GRAS status. ResultsThis work was aimed at isolating, purifying and characterizing an extracellular polysaccharide (EPS) produced by a foodgrade lactic acid bacteria Lactobacillus paraplantarum KM1. L. paraplantarum KM1 was isolated from human milk and identified by conventional and molecular techniques. The 16S rRNA sequence of the isolate was registered in National Centre for Biotechnology Information (NCBI) under accession number KX671558. L. paraplantarum KM1 was found to produce EPSs in lactose containing MRS medium, and the maximum yield (47.4 mg/ml) was achieved after 32-h incubation. As evident from TLC and HPLC analyses, the polysaccharide was found to be a heteropolymer-containing glucose, galactose and mannose as main sugars. Different oligosaccharides namely hexoses were obtained after partial hydrolysis of the polymer using MALDI-ToF-MS. The total molecular weight of all polysaccharides present was 348.7 kDa with 100 °C thermal stability as well as water soluble in nature. Cell cytotoxicity revealed that the purified EPS was safe for consumption; thus, it can be used in various food industries as emulsifying and texture agent. ConclusionsThe present study highlighted that exopolysaccharides could be harnessed to improve food products in terms of texture, emulsifying agents, pharmaceutical industry (antioxidants, antitumour, anti-inflammatory and antiviral agents) and as safety purposes.

Stability of Turoctocog Alfa, a Recombinant Factor VIII Product, during Continuous Infusion In Vitro.

Objective Turoctocog alfa is a recombinant factor VIII (rFVIII) for the prevention and treatment of bleeding in patients with hemophilia A, including those undergoing surgery and invasive medical procedures. This in vitro study evaluated the physical and chemical stability of turoctocog alfa during continuous infusion (CI) over 24 hours at 30°C. Materials and Methods The study was performed at 30°C ( ± 2°C). A CI system with pump speed set at either 0.6 or 1.5 mL/h was used to evaluate the stability of three turoctocog alfa strengths (500, 1,000, and 3,000 IU), equating to doses of 1.1 to 16.1 IU/h per kilogram of body weight. The following parameters were evaluated at selected time points between 0 and 24 hours: appearance of solution, clarity, pH, potency, purity, content, total high molecular weight proteins (HMWPs), and oxidized rFVIII. Results The mean potency of turoctocog alfa was maintained within the predefined acceptance criteria during CI for both pump speeds with all three strengths at 6, 12, or 24 hours (500 IU: ≥484 IU/vial; 1,000 IU: ≥1,014 IU/vial; and 3,000 IU: ≥3,029 IU/vial). Furthermore, the appearance of solution, clarity, pH, purity, content of turoctocog alfa, total HMWP, and oxidized forms were also within the predefined limits, and comparable to the reference samples (time = 0 hours) for the pump speeds and product strengths assessed. Conclusion Physical and chemical stability of turoctocog alfa was maintained during CI over 24 hours. There was only minor degradation or changes in any of the parameters tested. Potency was within the prespecified acceptance limits throughout 24 hours of infusion. These findings confirm the suitability of turoctocog alfa for CI.

A Systematic Review and Meta-Analysis of Serum Adiponectin Measurements in the Framework of Dog Obesity.

Simple SummaryAdiponectin is a molecule with biological activity that is closely linked with obesity and obesity-related problems. Despite some literature publications, there is a lack of consensus about how adiponectin changes in canine obesity. Therefore, a meta-analysis is performed here to assess the global performance of adiponectin concentrations in terms of obesity in dogs. After considering 20 different studies, including a total sample size of 366 dogs with obesity and 349 normal weight dogs, the meta-analysis indicates that adiponectin in serum is lower in obese dogs compared with normal weight dogs and increases after weight loss programs.Adiponectin is an abundant plasma protein that is closely related to obesity and obesity-related pathologies. The molecule can be found in three different isoforms, each with different biological activities. Studies on canine obesity have suggested that adiponectin concentrations are decreased in obesity; however, no canine meta-analyses have been performed that feature all the required data. The aim of this study is to perform a systematic review and meta-analysis of studies that pertain to total and high molecular weight (HMW) adiponectin in relation to canine obesity. From 20 different studies, a total of 366 dogs with obesity and 349 normal weight dogs are included in the meta-analysis. Client-owned dogs were most represented, accounting for 54.3% of the dogs used, while experimental dogs enrolled in the studies made up the remaining 45.7%. The concentrations of total adiponectin in dogs with obesity were significantly lower compared with normal weight dogs. Additionally, adiponectin concentrations were significantly higher in dogs after a successful weight loss protocol compared to the start of the protocol and were significantly lower in dogs after gaining weight. In conclusion, although caution should be taken due to the relatively low number of studies that exist and the high heterogeneity between them, this meta-analysis indicates that adiponectin is decreased in obese dogs.

Analysis of the SARS-CoV-2 spike protein glycan shield reveals implications for immune recognition

Here we have generated 3D structures of glycoforms of the spike (S) glycoprotein from SARS-CoV-2, based on reported 3D structures and glycomics data for the protein produced in HEK293 cells. We also analyze structures for glycoforms representing those present in the nascent glycoproteins (prior to enzymatic modifications in the Golgi), as well as those that are commonly observed on antigens present in other viruses. These models were subjected to molecular dynamics (MD) simulation to determine the extent to which glycan microheterogeneity impacts the antigenicity of the S glycoprotein. Lastly, we have identified peptides in the S glycoprotein that are likely to be presented in human leukocyte antigen (HLA) complexes, and discuss the role of S protein glycosylation in potentially modulating the innate and adaptive immune response to the SARS-CoV-2 virus or to a related vaccine. The 3D structures show that the protein surface is extensively shielded from antibody recognition by glycans, with the notable exception of the ACE2 receptor binding domain, and also that the degree of shielding is largely insensitive to the specific glycoform. Despite the relatively modest contribution of the glycans to the total molecular weight of the S trimer (17% for the HEK293 glycoform) they shield approximately 40% of the protein surface.

Universal size ratios of Gaussian polymers with complex architecture: radius of gyration vs hydrodynamic radius

We study the impact of arm architecture of polymers with a single branch point on their structure in solvents. Many physical properties of polymer liquids strongly dependent on the size and shape measures of individual macromolecules, which in turn are determined by their topology. Here, we use combination of analytical theory, based on path integration method, and molecular dynamics simulations to study structural properties of complex Gaussian polymers containing f^c linear branches and f^r closed loops grafted to the central core. We determine size measures such as the gyration radius R_g and the hydrodynamic radii R_H, and obtain the estimates for the size ratio R_g /R_H with its dependence on the functionality f=f^c+f^r of grafted polymers. In particular, we obtain the quantitative estimate of the degree of compactification of these polymers with increasing number of closed loops f^r as compared to linear or star-shape molecules of the same total molecular weight. Numerical simulations corroborate theoretical prediction that R_g /R_H decreases towards unity with increasing f. These findings provide qualitative description of polymers with complex architecture in theta solvents.

Adiposity, Physical Function, and Their Associations With Insulin Resistance, Inflammation, and Adipokines in CKD

Adiposity and physical fitness levels are major drivers of cardiometabolic risk, but these relationships have not been well-characterized in chronic kidney disease (CKD). We examined the associations of visceral adipose tissue (VAT), subcutaneous adipose tissue (SAT), intrahepatic fat, and physical function with inflammation, insulin resistance, and adipokine levels in patients with CKD. Prospective cohort study. Participants with stages 3-5 CKD not receiving maintenance dialysis, followed up at one of 8 clinical sites in the Chronic Renal Insufficiency Cohort (CRIC) Study, and who underwent magnetic resonance imaging of the abdomen at an annual CRIC Study visit (n=419). VAT volume, SAT volume, intrahepatic fat, body mass index, waist circumference, and time taken to complete the 400-m walk test (physical function). Markers of inflammation (interleukin 1β [IL-1β], IL-6, tumor necrosis factor receptor 1 [TNFR1], and TNFR2), insulin resistance (homeostasis model assessment of insulin resistance), and adipokine levels (adiponectin, total and high molecular weight, resistin, and leptin). Multivariable linear regression of VAT and SAT volume, intrahepatic fat, and physical function with individual markers (log-transformed values), adjusting for relevant covariates. Mean age of the study population was 64.3 years; 41% were women, and mean estimated glomerular filtration rate was 53.2±14.6 (SD) mL/min/1.73m2. More than 85% were overweight or obese, and 40% had diabetes. Higher VAT volume, SAT volume, and liver proton density fat fraction were associated with lower levels of total and high-molecular-weight adiponectin, higher levels of leptin and insulin resistance, and lower high-density lipoprotein cholesterol and higher serum triglyceride levels. A slower 400-m walk time was associated only with higher levels of leptin, total adiponectin, plasma IL-6, and TNFR1 and did not modify the associations between fat measures and cardiometabolic risk factors. Lack of longitudinal data and dietary details. Various measures of adiposity are associated with cardiometabolic risk factors. Physical function was also associated with the cardiometabolic risk factors studied and does not modify associations between fat measures and cardiometabolic risk factors. Longitudinal studies of the relationship between body fat and aerobic fitness with cardiovascular and kidney disease progression are warranted.

Impact of chain flexibility of copolymer gelators on performance of ion gel electrolytes for functional electrochemical devices

In this study, rationally designed random copolymers containing highly flexible, low glass transition temperature (Tg) segments are suggested as effective polymeric gelators for high-performance ion gel electrolytes. To this end, a series of poly(styrene-ran-butyl acrylate) copolymers (PS-r-PBAs) is prepared by a one-pot reversible additional-fragmentation chain transfer polymerization. Physically crosslinked ion gel electrolytes are produced by self-assembly when blended with ionic liquids of 1-butyl-3-methylimidazolium bis(trifluoromethyl sulfonyl)imide ([BMI][TFSI]). The properties of gels based on PS-r-PBAs and PS-ran-poly(methyl methacrylate)s (PS-r-PMMAs) are compared at similar molecular conditions. As a result, the effectiveness of the high chain flexibility of butyl acrylate is shown by higher ionic conductivity. The gels with PS-r-PBAs are further optimized in terms of the molecular characteristics of copolymers (e.g., the content of Sty and total molecular weight) and gel composition. The versatility of PS-r-PBA-containing gels as practical electrolyte platforms is demonstrated by preparing all-in-one type electrochromic devices, for which electrochromic ion gels are prepared by incorporating chromophores into the gels. To extend the functionality of the electrochromic devices, dot-shaped electrochromic gel arrays are fabricated for actively controllable smart windows that can reduce the window strike of birds.

Cell Wall Saturation Limit and Selected Properties of Thermally Modified Oak Wood and Cellulose

The interaction of water and oak wood is common in outdoor expositions and will remain a probable occurrence in the future. New insights into the recognition of a cell wall saturation limit are presented by a double-weighing method at 20 °C. The cell wall saturation limit, as the property of thermally modified oak wood, is significantly influenced by different treatment temperatures (20, 160, 180, 210 and 240 °C) on a 5% alpha level. A significantly higher equilibrium moisture content was reached by thermally modified oak wood at a temperature of 20 °C and relative humidity of 65% after its equilibrium in the water-in-reservoir. Moreover, the results are used in the treatment of woodchips to produce cellulose or decomposition of thermally modified wood to its basic chemical components. The investigated properties of cellulose revealed its relationship with water. The number of water molecules bonded to a cellulose chain was correlated with other measured compositions: average molecular weight, total crystalline index, lateral order index and polydispersity index. Analyses showed that there was a strong negative correlation between lateral order index and average molecular weight. The same was true between total crystalline index and average molecular weight. The rest of the properties were positively correlated with the number of water molecules bonded to glucopyranose. The results revealed the possible regeneration of a wood sorption ability after heat treatment and the stability of cellulose in such process.

Association of Total and High Molecular Weight Adiponectin with Components of Metabolic Syndrome in Mexican Children

Objective:Childhood obesity linked to metabolic alterations, tend to appear simultaneously with altered adipocytokines, suggesting a role in pathogenetic development. Low circulating level of total and high molecular weight (HMW) adiponectin have been associated with components of the metabolic syndrome (MetS) and could represent an independent risk factor with potential use as a biomarker. To examine the prevalence of MetS in Mexican school children and to investigate the association of total and HMW adiponectin levels with biochemical parameters related to MetS.Methods:The study included a population of boys and girls, from 8 to 11 years old. Anthropometric and biochemical parameters were evaluated according to weight and MetS status. A correlation analysis was fitted to establish an association between adiponectin concentrations and metabolic indicators.Results:One-hundred and fifty five children participated (59.4% females) from 8-11 years of age. The prevalence of MetS was of 10.3%. Impaired biochemical parameters, including total and HMW adiponectin, were associated with obesity. The adiponectin level was significantly lower in MetS than in non-MetS subjects (4.5 vs. 5.4 μg/mL). Total- but not HMW adiponectin concentration was negatively correlated with blood pressure, fasting insulin, fasting blood sugar and Homeostatic Model Assessment for Insulin Resistance.Conclusion:In young children, the total adiponectin level is associated with impaired biochemical parameters of carbohydrate metabolism and could be an excellent early predictor of metabolic complications.

The Relationship of Plasma Linoleic Acid and Oleic Acid Levels with Markers of Inflammation and Glycemia in Healthy Adults

Abstract Objectives Higher blood levels of the essential fatty acid, linoleic acid (LA), are associated with a decreased risk of type 2 diabetes. However, many dietary oils once high in LA are now low in LA and high in oleic acid (OA). We have previously shown in healthy adults that supplementation with a high LA oil can increase plasma LA levels and decrease plasma OA levels. The current study examines the relationship of habitual levels of plasma LA and OA with markers of body composition, inflammation and glycemia in healthy adults. Methods Data from baseline visit were analyzed from 127 health adults participating in a 2-week study of the effect of dietary oils on blood fatty acid profiles. Plasma fatty acid composition was measured by gas chromatography. Insulin, glucose, total and high molecular weight (HMW) adiponectin, tumor necrosis factor receptor 2 (TNF-r2) and lipopolysaccharide binding protein (LBP) were measured in fasting plasma samples. Body mass index (BMI) and sagittal diameter (SAD) were measured as markers of body composition. Grip strength was measured as a marker of muscle strength and gait speed was measured as a marker of muscle function. Linear regression was used to assess the association of study measurements to plasma LA or OA. Results were adjusted for sex, age, physical activity and BMI. Results Plasma LA was negatively associated with both BMI and SAD while plasma OA was positively associated with both insulin and grip strength. In males, but not females, higher plasma LA was associated with higher HMW adiponectin while higher plasma OA was positively associated with fasting glucose. Neither plasma LA or OA were associated with total adiponectin, TNF-r2, LBP or gait speed. Conclusions Higher levels of plasma LA predicted for lower measures of adiposity in both males and females and higher HMW adiponectin levels in males. Higher levels of plasm OA predicted for increased grip strength and higher glycemia, particularly in men. To our knowledge no randomized controlled trial has compared LA or OA supplementation on body composition, glycemia, and adiponectin in healthy men and women. Funding Sources Funding was provided by the Carol S. Kennedy Professorship and the Ohio Agriculture Research and Development Center.

Polycyclic aromatic hydrocarbon exposure and atherosclerotic cardiovascular disease risk in urban adults: The mediating role of oxidatively damaged DNA

Polycyclic aromatic hydrocarbon (PAH) exposure has been considered a risk factor for cardiovascular diseases (CVD), whereas possible mechanisms for this association have not been fully understood. This study focused on exploring the potential effect of oxidatively damaged DNA on the relationships between PAH exposure and the 10-year atherosclerotic CVD (ASCVD) risk. Urinary levels of monohydroxy PAH metabolites (OH-PAHs) and 8-oxo-7,8-dihydro-2′-deoxyguanosine (8-oxodG, the typical biomarker for oxidatively damaged DNA) were measured among 3052 subjects in the baseline of the Wuhan-Zhuhai cohort. The relationships between urinary OH-PAHs, 8-oxodG and 10-year risk of ASCVD were analyzed by linear mixed models and logistic regression models, respectively. The mediation analysis was further applied to explore the role of 8-oxodG in the relationship between urinary OH-PAHs and 10-year ASCVD risk. After controlling for potential confounders, the log-transformed level of total urinary low molecular weight OH-PAHs (∑LMW OH-PAHs) was significantly associated with an elevated risk of 10-year ASCVD [odds ratio (OR) = 1.222, 95% confidence interval (CI): 1.065–1.402]. More specifically, significantly positive dose-response relationships between total urinary hydroxynaphthalene (∑OHNa), hydroxyfluorene (∑OHFlu), hydroxyphenanthrene (∑OHPh) and 10-year ASCVD risk were observed (all P for trend <0.05). We also found positive relationships between urinary OH-PAH levels and 8-oxodG, as well as between urinary 8-oxodG levels and 10-year risk of ASCVD. Moreover, mediation analyses indicated that urinary 8-oxodG mediated 14.49%, 12.62% and 10.55% of the associations between urinary ∑LMW OH-PAHs, ∑OHNa, ∑OHFlu and 10-year ASCVD risk, respectively. These findings suggest that the oxidatively damaged DNA pathway may be a possible mechanism underlying PAH-associated ASCVD risk elevation.

Mechanically robust and thermally stable electrochemical devices based on star-shaped random copolymer gel-electrolytes

We synthesized 6-arm star-shaped polystyrene-ran-poly(methyl methacrylate) copolymers ((S-r-M)6) for mechanically robust and thermally stable ion gels containing an ionic liquid of 1-ethyl-3-methylimidazolium bis(trifluoromethyl sulfonyl)imide ([EMI][TFSI]). The (S-r-M)6-based gels exhibited higher elastic modulus (E∼1.67×105Pa), which is more than five-times that (∼0.29×105Pa) of linear PS-r-PMMA-based ion gels at the same Sty content (∼29mol%), irrespective of applied mechanical strains (stretching and compression). In addition, they showed outstanding thermal stability. For example, the gel-sol transition temperature (Tgel) of (S-r-M)6 gels was ∼72°C, compared with that (∼56°C) of linear PS-r-PMMA-based ion gels. These physical properties of gels were further improved by increasing total molecular weight and the fraction of styrene, giving E of ∼3.8×105Pa and Tgel of ∼163°C. The resulting gels were functionalized by introducing electrochemiluminescence luminophores (tris(2,2′-bipyridyl)ruthenium(II) hexafluorophosphate). By utilizing the mechanical robustness of the (S-r-M)6 gels, we fabricated emissive electrochemical displays through ‘cut-and-stick’ process. Moreover, the thermally stable (S-r-M)6 gels indicated good dimensional stability, offering a chance to demonstrate ECL devices that operate even at high temperatures.

Desorption process and morphological analysis of real polycyclic aromatic hydrocarbons contaminated soil by the heterogemini surfactant and its mixed systems

Surfactant-enhanced remediation (SER) is an efficient and low-cost technology for polycyclic aromatic hydrocarbons (PAHs) contaminated sites. This study assessed the desorption processes and effects of Heterogemini surfactant (Dodecyldimethylammonium bromide/tetradecyldimethylammonium bromide, DBTB), two traditional surfactants (Hexadecyl trimethyl ammonium bromide, CTAB; Sorbitan monolaurate, Span 20) and their mixed systems on the real PAHs-contaminated soil from an abandoned coking plant, as well they were analyzed micro morphologically. DBTB had greater desorption capability for PAHs and favorable interaction with the traditional surfactants confirmed by reaction parameters βm and Gibbs. Whether for total PAHs (TPAHs) or different molecular weight PAHs, the mixed system Span 20/DBTB had larger molar solubilization ratio (MSR) and partition coefficient (Km) than CTAB/DBTB, the highest desorption rate for TPAHs reaching 68.83%. Additionally, microscopic morphology showed micelles of Span 20/DBTB were more dispersed and formed strings easily, explaining its good desorption capability. What resulted demonstrated the feasibility of DBTB, a novel Heterogemini surfactant, and its mixed systems remediating PAHs-contaminated soil of abandoned industrial site.

Variations of dissolved organic matter and Cu fractions in rhizosphere soil induced by the root activities of castor bean

The root soil interaction affects metal bioavailability in the rhizosphere, thus impacting the uptake and accumulation of metals by plants. In this study, a greenhouse experiment using a root-bag technique for castor bean plants was conducted to determine the i) rhizosphere effect on the fractions of Cu, and ii) the characteristics of dissolved organic matter (DOM) in the rhizosphere soil. Results showed that the Cu concentration in the leaves, stems, and roots was 15.41, 6.71, and 47.85 mg kg−1, respectively, in the control and reached up to 96.5, 254.9, and 3204 mg kg−1 in Cu400 treatment, respectively. After cultivating castor bean plants, the concentration of acid exchangeable Cu in rhizosphere soil was higher than that in the bulk soil for the same Cu addition, whereas the concentrations of reducible Cu, oxidizable Cu, and residual Cu in the rhizosphere soil were all lower than those in the bulk soil, respectively. In comparison to the bulk soil, the pH decreased while the total nitrogen and total carbon concentrations both increased in the rhizosphere soil. Moreover, the concentrations of total low molecular weight organic acids (LMWOAs) and total amino acids in the rhizosphere soil of the Cu treatments increased by between 15.18% to 47.17% and 36.35%–200%, respectively with respect to the control. The less complex DOM with a high LMWOAs concentration in the rhizosphere soil shifted the soil Cu from a relative stable fraction to available fractions.

Exercise improves adiposopathy, insulin sensitivity and metabolic syndrome severity independent of intensity.

What is the central question of this study? What are the effects of work-matched continuous versus high-intensity interval training for 2weeks on adiposopathy and cardiometabolic risk in obese adults with prediabetes? What is the main finding and its importance? Independent of intensity, short-term exercise improves adiposopathy and insulin sensitivity. While both exercise intensities reduced fasting leptin concentrations and metabolic syndrome severity, only interval training elevated total adiponectin. In contrast to previous work, neither condition altered high-molecular weight adiponectin. Collectively, these data suggest that short-term exercise can improve adipokine profiles, which may aid in reducing cardiometabolic risk prior to clinically meaningful weight loss in adults with prediabetes. Individuals with prediabetes who are overweight and obese are at an increased risk of developing endocrine disruption of fat tissue, known as adiposopathy. While short-term exercise improves adipokine profiles, the effects of exercise intensity when matched for energy expenditure on adiposopathy are unknown. We hypothesized that high-intensity exercise would elicit greater changes in adiposopathy compared to moderate exercise. Twenty-eight overweight and obese adults (age: 60.9±8.4years; BMI: 33.0±5.4kgm-2 ) with prediabetes were randomized to twelve 60-min sessions of either moderate-continuous (CONT; n=14) or high-intensity interval (INT; n=14) exercise training. Total and high molecular weight (HMW) adiponectin and leptin were collected to assess adiposopathy (ratio of total adiponectin to leptin; A/L). Insulin sensitivity (SIIS ) was determined using a 75goral glucose tolerance test before and after training. Cardiometabolic risk factors were measured and a z-score was calculated to determine metabolic syndrome (MetS) severity. CONT and INT increased A/L (P<0.01) and decreased leptin (P<0.01) and MetS severity (P=0.04). Neither intervention altered circulating levels of HMW adiponectin (P=0.76) and only INT increased total adiponectin levels (P=0.02). Both intensities increased insulin sensitivity (P<0.01), which was associated with improvements in A/L (r=0.47, P=0.01). Additionally, increases in A/L tended to relate to decreased MetS severity (r=-0.36, P=0.09). Short-term exercise intensity, when matched for energy expenditure, does not differentially affect improvements in adiposopathy in overweight and obese adults with prediabetes. Further, 12 bouts of exercise improved insulin sensitivity and MetS severity, suggesting that improving adipokine profiles may aid in reducing cardiometabolic risk.