Total Knee Arthroplasty Designs Research Articles

Computational Lower Limb Simulator Boundary Conditions to Reproduce Measured TKA Loading in a Cohort of Telemetric Implant Patients.

Recent advancements in computational modeling offer opportunities to refine total knee arthroplasty (TKA) design and treatment strategies. This study developed patient-specific simulator external boundary conditions (EBCs) using a PID-controlled lower limb finite element (FE) model. Calibration of the external actuation required to achieve measured patient-specific joint loading and motion was completed for nine patients with telemetric implants during gait, stair descent, and deep knee bend. The study also compared two EBC scenarios: activity-specific hip AP motion and pelvic rotation (that was averaged across all patients for an activity) and patient-specific hip AP motion and pelvic rotation. Including patient-specific data significantly improved reproduction of joint-level loading, reducing root mean squared error between the target and achieved loading by 28.7% and highlighting the importance of detailed patient data in replicating joint kinematics and kinetics. The principal component analysis (PCA) of the EBCs for the patient dataset showed that one component represented 77.8% of the overall variation, while the first three components represented 97.8%. Given the significant loading variability within the patient cohort, this group of patient-specific models can be run individually to provide insight into expected TKA mechanics variability, and the PCA can be utilized to further create reasonable EBCs that expand the variability evaluated.

TOTAL KNEE ARTHROPLASTY REVISION RATES IN MOBILE- VERSUS FIXED-BEARING IMPLANTS: A NEW ZEALAND JOINT REGISTRY STUDY

IntroductionThe mobile-bearing (MB) total knee arthroplasty (TKA) design was introduced with the aim of reducing polyethylene wear and component loosening seen in the fixed-bearing (FB) design. A recent joint registry study has revealed increased risk for all-cause revision, but not revision for infection, in MB-TKA. We used the New Zealand Joint Registry (NZJR) to compare all-cause revision rates, and revision rates for aseptic loosening of MB-TKA compared with fixed bearing (FB) TKA.MethodsAll patients who underwent a primary TKA registered in the NZJR between the 1st January 1999 to 31st December 2021 were identified. Analysis compared MB to FB designs, with sub analysis of implants from a single company. We identified 135,707 primary TKAs, with 104,074 (76.7%) FB-TKAs and 31,633 (23.3%) MB-TKAs recorded. We examined all-cause revision rates, reasons for revision and performed survival analyses.ResultsFor all-comers, MB-TKA had an all-cause revision rate of 0.43/100-component-years (OCY) compared with 0.42/OCY for FB-TKA (p=0.09). The all-cause revision rate was higher for those age < 65 years (MB TKA 0.60/OCY vs. FB-TKA 0.59/OCY) compared to those > 65 years at time of primary TKA (MB-TKA 0.29/OCY vs. FB-TKA 0.32/OCY), however there was no statistically significant difference between implant design in either age group (p=0.16 and p=0.64; respectively). Similarly, there was no difference in revision rates for aseptic loosening between implant designs. Kaplan-Meier survival analysis demonstrates no statistically significant difference in revision-free survival of implants, with both MB-TKA and FB-TKA demonstrating ∼93% revision free survival at 23 years.ConclusionsBoth FB- and MB-TKA demonstrated excellent survivorship, with no significant difference in all-cause revision rates or revision for aseptic loosening between implant designs.

Performance of medial pivot, posterior stabilized and rotating platform total knee arthroplasty based on anteroposterior stability and patient-reported outcome measures; a multicentre double-blinded randomized controlled trial of 210 knees.

Despite advancements in total knee arthroplasty (TKA), 10-20% of patients remain dissatisfied after surgery. Improved anteroposterior (AP) stability provided by medial pivot (MP) implants may theoretically lead to higher patient satisfaction. AP stability and patient-reported outcome measures (PROMs) at one-year postsurgery were compared between patients who underwent TKA with MP- (n = 121), posterior stabilized (PS; n = 53) and rotating platform (RP; n = 57) implants in a double-blind multicentre randomized controlled trial (Dutch Trial Register: NL6856, 21-02-2018). AP stability was assessed at 30°, 60° and 90° of knee flexion using a KT-2000 arthrometer. PROMs were measured preoperative and one-year postsurgery. MP-TKA provided significant better AP stability at early flexion (30°) compared to PS- and RP-TKA (median [IQR]; 1.79 [1.14-2.77] mm vs. 3.31 [2.51-4.08] mm vs. 2.82 [1.80-4.03] mm, p < 0.001). Additionally, MP-TKA provided significant better AP stability at mid-flexion (60°) compared to PS-TKA (1.75 [1.23-2.36] mm vs. 2.14 [1.49-2.83] mm, p = 0.014). PROM improvements were comparable between implant designs. AP laxity of ≥ 4mm at early flexion was independently of implant design associated with significantly worse Kujala scores. The incidence of ≥ 4mm AP laxity at any knee angle was however not significantly different between implant designs. MP-, PS- and RP-TKA all provide excellent and comparable results. Although MP-TKA provided better AP stability at early flexion compared to PS- and RP-TKA, this was found to be unrelated to improved PROMs in favour of MP-TKA. More studies focusing on early and mid-flexion performance based differences between MP and other TKA designs are required to confirm our findings. Other non-implant related factors may play a more important role in the performance of TKA and are potentially worthwhile examining.

Bi-cruciate retaining total knee arthroplasty is here to stay: A consecutive series transitioning from manual instrumentation to enabling technologies.

Bicruciate-retaining (BCR) total knee arthroplasty (TKA) has seen renewed interest due to the potential for more natural knee kinematics with anterior cruciate ligament (ACL) retention. The present study attempts to determine differences in the 2-year survivorship and patient-reported outcomes between two surgical strategies (traditional instrumentation versus robotics) applied to the extensive use of a modern, 2nd generation BCR TKA design. We performed a retrospective study with prospectively collected data of 113 patients who underwent primary TKA between 2018 and 2020 using a 2nd generation BCR TKA implant. Patient demographics, PROMS, and intra/post-operative complications were collected. Patients were also evaluated according to the use or not of robotics. A Kaplan-Meier analysis was used to evaluate revision-free survival at follow up. 102 patients were enrolled: 90 received traditional surgery and 12 robotic-assisted surgery. The mean age was 68years (SD 7.76) with an average BMI of 29.6 kg/m2 (SD 3.56). The mean follow up (FU) was 32.4 ± 6.2 months (range 24-45months). Survivorship at 2 years was 98% (95% CI: 92.4-99.5). Revisions/reoperations were performed for anterior cruciate ligament (ACL) tear (1/4), pain (1/4), arthrofibrosis (1/4) and acute periprosthetic joint infection (PJI) (1/4). At final FU, 92 patients (90.2%) considered themselves satisfied, showing a mean OKS of 40.6 (SD 5.1) and a mean FKS of 76.7 (SD 11.8). No differences in the outcome were found between traditional and robotic-assisted procedures. The modern BCR design evaluated in this study achieved excellent results in terms of implant survivorship, low rate of reoperation and clinical results, independently from the use of enabling technologies.

Comparison of the Kinematics and Laxity of Total Knee Arthroplasty Bearing Designs Stabilized With Specimen-Specific Virtual Ligaments on a Joint Motion Simulator.

A variety of total knee arthroplasty (TKA) designs offer increased congruency bearing options, primarily to compensate for a loss of posterior cruciate ligament (PCL) function. However, their efficacy in providing sufficient stability under different circumstances requires further investigation. The preclinical testing of prosthesis components on joint motion simulators is useful for quantifying how design changes affect joint stability. However, this type of testing may not be clinically relevant because surrounding ligaments are either ignored or greatly simplified. This study aimed to assess the kinematics and stability of TKA joints during various motions using condylar-stabilized (CS) bearings without a PCL versus cruciate-retaining (CR) bearings with an intact PCL. TKA prosthetic components were tested on a joint motion simulator while being stabilized with five different sets of specimen-specific virtual ligament envelopes. In comparison to CR knees, CS knees without a PCL exhibited a greater amount of posterior tibial displacement laxity, with a mean increase of 2.7±2.1 mm (p = 0.03). Additionally, significant differences were observed in the anterior-posterior kinematics of the knee joint during activities of daily living (ADL) between the two designs. These results were consistent with previous cadaveric investigations, which indicated that CS knees without a PCL are less resistant to posterior tibial displacement than CR knees with one. This study employing virtual ligaments confirms previous findings that the raised anterior lip of some CS bearings may not completely compensate for the absence of the PCL; however, as both studies used reduced joint contact forces, the contributions of this design feature may be attenuated.

The primary stability of a cementless PEEK femoral component is sensitive to BMI: A population-based FE study

The use of polyetheretherketone (PEEK) for cementless femoral total knee arthroplasty (TKA) components is of interest due to several potential advantages, e.g. the use in patients with metal hypersensitivity. Additionally, the stiffness of PEEK closer resembles the stiffness of bone, and therefore, peri-prosthetic stress-shielding may be avoided. When introducing a new implant material for cementless TKA designs, it is important to study its effect on the primary fixation, which is required for the long-term fixation. Finite element (FE) studies can be used to study the effect of PEEK as implant material on the primary fixation, which may be dependent on patient factors such as age, gender and body weight index (BMI). Therefore, the research objectives of this study were to investigate the effect of PEEK vs cobalt-chrome (CoCr) and patient characteristics on the primary fixation of a cementless femoral component. 280 FE models of 70 femora were created with varying implant material and gait and squat activity. Overall, the PEEK models generated larger peak micromotions than the CoCr models. Distinct differences were seen in the micromotion distributions between the PEEK and CoCr models for both the gait and squat models. The micromotions of all femoral models significantly increased with BMI. Neither gender nor age of the patients had a significant effect on the micromotions. This population study gives insights into the primary fixation of a cementless femoral component in a cohort of FE models with varying implant material and patient characteristics.

Gap patterns and radiographic follow-up of newer-generation cementless total knee arthroplasty designs.

Interest in cementless total knee arthroplasty (TKA) has increased with advancement of biomaterials and implant design and associated improved longevity. We sought to evaluate the gap patterns and radiolucent zones radiographically for 2 newer-generation cementless TKA designs. We retrospectively reviewed our single-institution database between January 2017 and December 2019. We identified patients with a porous keeled tibia base-plate with 4-bullet cruciform spikes and peri-apatite coated femoral component (study group 1) and patients who received a cementless porous coated femoral component and rotating platform tibia baseplate with 4 peripheral porous coated pegs around a central cone (study group 2). We identified gap patterns at 6 weeks and at 1 year or more postoperatively on radiographs, noting indications for reoperation. We identified 228 patients in study group 1 and 41 patients in study group 2. At 1-year follow-up, we found evidence of resolved femoral gaps in 52 (72.2%) of 72 patients in study group 1 and 10 (58.8%) of 17 patients in study group 2 (p = 0.124). We identified 27 (84.3%) of 32 patients in study group 1 and 7 (70.0%) of 10 patients in study group 2 with resolved tibia gaps (p = 0.313). After 1 year, there were significantly more Zone 3a femoral zonal radiolucent gaps (p = 0.001) and Zone 8 tibia zonal radiolucent gaps (p = 0.002) in study group 2 than in study group 1. There were 4 reoperations for study group 1 and 0 reoperations for study group 2. The modern cementless TKA systems have varied gap patterns in postoperative radiographs, which may be attributed to the implant design. Most radiolucent gaps resolve radiographically on follow-up.

Excellent 2-Year Outcomes of a Midlevel Constrained Liner Used in Stemless Primary TKA

Introduction: Instability after total knee arthroplasty (TKA) remains a leading cause of revision TKA and can lead to patient dissatisfaction. While many companies have developed midlevel constrained (MLC) polyethylene inserts in primary TKAs, there is little data on their outcomes. Purpose: We sought to analyze short-term outcomes including survivorship, rates of manipulation under anesthesia (MUA), and improvements in patient-reported outcome measures (PROMs) preoperatively to postoperatively in one design of MLC TKA. Methods: We prospectively followed consecutive primary TKA patients who received constrained inserts (Journey II or Legion Genesis II, Smith and Nephew) from 5 surgeons, 2019 to 2020, at a single academic institution. We analyzed revision-free survivorship, MUA rates, and PROMs, preoperatively to postoperatively. Results: A total of 356 patients were included with a mean age of 64 years; 49% were male and the mean body mass index (BMI) was 31 kg/m2. Sixteen patients (4.5%) underwent MUA and 3 patients (0.8%) underwent revision. Two patients underwent polyethylene exchange and patellar resection for patellar loosening. One patient underwent liner exchange for instability. The 2-year revision-free survivorship was 98.5% (95% confidence interval [CI]: 96.6%–100%). Survivorship free from revision for tibial or femoral aseptic loosening was 100% at 2 years. The 2-year survivorship free from MUA was 92.3% (95% CI: 88.6%–96.1%). The mean Knee Osteoarthritis and Injury Outcomes Score Joint Replacement (KOOS JR) was 81 at 2 years follow-up, while the Lower Extremity Activity Score (LEAS) score was 10.5. Conclusion: At a mean of 3 years follow-up, 2 types of MLCs used in primary TKA were associated with a low rate of early revision, low rate of MUA, and reliable improvement in functional outcomes. These MLCs were not associated with early loosening or unique failure modes.

Effect of Surgical Technique, Implant Design, and Time of Examination on Contact Kinematics: A Study of Bicruciate-Stabilized and Posterior-Stabilized Total Knee Arthroplasty

BackgroundBicruciate-stabilized (BCS) total knee arthroplasty (TKA) designs attempt to approximate natural knee mechanics. Multiple surgical techniques, including gap balancing (GB) and measured resection (MR), have been developed to provide optimal implant positioning and soft-tissue balance. The goal of this study was to determine the effect of surgical technique on BCS TKA contact kinematics. Secondary goals included investigating the change of kinematics over time and comparing BCS TKA kinematics to a posterior-stabilized (PS) design. MethodsThe study included the BCS-GB, BCS-MR, and PS-MR groups. The BCS-GB and BCS-MR groups underwent weight-bearing radiostereometric analysis for multiple knee flexion angles at 3 months and 1 year postoperatively, whereas the PS-MR group was imaged at 1 year postoperatively. The medial and lateral contact kinematics were determined from implant poses. ResultsThere were no differences in BCS TKA kinematics between the GB and MR techniques. There were differences in the mid-flexion ranges when comparing the 3-month and 1-year kinematics of the BCS design; however, they were less than 1.5 mm. Differences existed between the kinematics of the BCS and PS designs at all flexion angles for the medial condyle (P < .0006) and at 0° of flexion on the lateral condyle (P < .0001). ConclusionsContact kinematics for a BCS design were similar for both surgical techniques, suggesting both are appropriate for this design. Small, likely clinically insignificant differences were found between 3-month and 1-year kinematics. The BCS TKA kinematics differed from the PS design; however, it is unclear whether these differences improve clinical outcomes.

Achieving Specified Laxity in a Noncruciate Total Knee: A Laboratory Design Study

BackgroundNoncruciate total knee arthroplasty designs, including ultracongruent, medially congruent, and medial pivot, are gaining increasing attention in total knee arthroplasty surgery. However, there is no consensus for the bearing surface design, whether there should be different medial, lateral, anterior, and posterior laxities, or whether the medial side should be a medial pivot. This study proposes the criterion of reproducing the laxity of the anatomic knee, defined as the displacements and rotations of the femur on the tibia in the loaded knee when shear and torque are applied. The purpose of this study was to determine the ideal tibial radii to achieve that goal. MethodsThe femoral component was based on the average knee from 100 mild arthritic knee scans. There were 8 tibial components that were designed with different sagittal radii: antero-medial, antero-lateral, postero-medial, and postero-lateral. Radii were defined as the percent height reduction from full conformity with the femoral profile. Components were 3-dimensional–printed. A test rig was constructed where the tibial component was fixed and shear and torque were applied to the femoral component. Displacements and rotations of the femoral component were measured at 0 and 45° of flexion, the latter representing any flexion angle due to the constant femoral sagittal radius. ResultsDisplacements ranged from 0 to 11 mm, and rotations ranged from 1 to 11°. Anterior femoral displacements were higher than posterior due to the shallow distal-anterior femoral profile. The final femoral and tibial components with the most closely matched anatomic laxity values were designed and tested. ConclusionsA steeper distal-anterior femoral radius was an advantage. High medial-anterior tibial conformity was important. However, on the lateral side, the posterior sagittal tibial radius had to be shallower than ideal to allow femoral rollback in high flexion. This meant that the posterior laxity displacements on the lateral side were higher than anatomic, and there was no guidance for lateral femoral rollback.

Mid-term outcomes of a kinematically designed cruciate retaining total knee arthroplasty.

Advances in implant material and design have allowed for improvements in total knee arthroplasty (TKA) outcomes. A cruciate retaining (CR) TKA provides the least constraint of TKA designs by preserving the native posterior cruciate ligament. Limited research exists that has examined clinical outcomes or patient reported outcome measures (PROMs) of a large cohort of patients undergoing a CR TKA utilizing a kinematically designed implant. It was hypothesized that the studied CR Knee System would demonstrate favorable outcomes and a clinically significant improvement in pain and functional scores. To assess both short-term and mid-term clinical outcomes and PROMs of a novel CR TKA design. A retrospective, multi-surgeon study identified 255 knees undergoing a TKA utilizing a kinematically designed CR Knee System (JOURNEY™ II CR; Smith and Nephew, Inc., Memphis, TN) at an urban, academic medical institution between March 2015 and July 2021 with a minimum of two-years of clinical follow-up with an orthopedic surgeon. Patient demographics, surgical information, clinical outcomes, and PROMs data were collected via query of electronic medical records. The PROMs collected in the present study included the Knee Injury and Osteoarthritis Outcome Score for Joint Replacement (KOOS JR) and Patient-Reported Outcomes Measurement Information System (PROMIS®) scores. The significance of improvements in mean PROM scores from preoperative scores to scores collected at six months and two-years postoperatively was analyzed using Independent Samples t-tests. Of the 255 patients, 65.5% were female, 43.8% were White, and patients had an average age of 60.6 years. Primary osteoarthritis (96.9%) was the most common primary diagnosis. The mean surgical time was 105.3 minutes and mean length of stay was 2.1 d with most patients discharged home (92.5%). There were 18 emergency department (ED) visits within 90 d of surgery resulting in a 90 d ED visit rate of 7.1%, including a 2.4% orthopedic-related ED visit rate and a 4.7% non-orthopedic-related ED visit rate. There were three (1.2%) hospital readmissions within 90 d postoperatively. With a mean time to latest follow-up of 3.3 years, four patients (1.6%) required revision, two for arthrofibrosis, one for aseptic femoral loosening, and one for peri-prosthetic joint infection. There were significant improvements in KOOS JR, PROMIS Pain Intensity, PROMIS Pain Interference, PROMIS Mobility, and PROMIS Physical Health from preoperative scores to six month and two-year postoperative scores. The evaluated implant is an effective, novel design offering excellent outcomes and low complication rates. At a mean follow up of 3.3 years, four patients required revisions, three aseptic and one septic, resulting in an overall implant survival rate of 98.4% and an aseptic survival rate of 98.8%. The results of our study demonstrate the utility of this kinematically designed implant in the setting of primary TKA.

Four-Year Outcomes of Cementless Versus Cemented Fixation of a Newly Introduced Total Knee Arthroplasty Design.

Aseptic loosening continues to be a major cause of failure of total knee arthroplasty (TKA). Although cemented fixation remains the gold standard, there is renewed interest in cementless fixation as a means of decreasing this risk via biologic fixation. The purpose of this study was to evaluate the clinical outcomes of cemented and cementless versions of a newly introduced TKA design at an average of 4 years postoperatively. This was a retrospective case-control study of 100 primary TKAs comparing cementless vs cemented TKAs using the same cruciate-retaining implant design (ATTUNE Knee System; DePuy Synthes). Fifty patients undergoing cementless TKA with a mean age of 60.8 years (range, 48-71 years) and body mass index (BMI) of 31.6 kg/m2 (range, 23.7-41.9 kg/m2) were matched to 50 patients undergoing primary cemented TKA with a mean age of 62.7 years (range, 51-73 years) and BMI of 30.1 kg/m2 (range, 24.6-43.9 kg/m2). The mean follow-up was 4.2 years (range, 4.0-4.4 years) in the cementless group and 7.6 years (range, 7.5-7.7 years) in the cemented group. Complications, clinical outcomes using the Knee Society Score (KSS), and radiographic analyses were evaluated at final follow-up. Student's t tests were used for statistical analyses. There was no statistical difference in age, BMI, and preoperative KSS between the two groups (P=.12, P=.15, and P=.55, respectively). There were no complications or reoperations in either cohort. There were no statistical differences in range of motion and total KSS at final follow-up between the two groups. Final total KSS had a mean of 91.1 for the cementless group and 93.7 for the cemented group. There was no radiographic evidence of component subsidence or loosening in either cohort. When compared with its cemented counterpart, the newly introduced cementless TKA design had similar excellent clinical improvements and radiologic results at an average of 4 years of follow-up. [Orthopedics. 2024;47(3):161-166.].

Can Asymmetry in Total Knee Arthroplasty Design Lead to More Normal-Like Postoperative Kinematics? A Multi-Implant Evaluation

BackgroundFew studies have evaluated the effects of symmetrical versus asymmetrical implant designs, more specifically the femoral condyles, trochlear groove, joint line, and bearing surfaces. The objective of this study was to investigate multiple posterior cruciate-retaining (PCR) total knee arthroplasty (TKA) designs influencing factors related to TKA asymmetry, and to investigate whether asymmetry can improve postoperative knee kinematics. MethodsIn vivo tibio-femoral kinematics for 99 subjects was evaluated in this retrospective study. Overall, 10 subjects had a nonimplanted, normal knee, and 89 subjects had 1 of 3 PCR TKAs with varying degrees of asymmetry within their femoral and tibial components (PCR #1 = 30, PCR #2 = 29, PCR #3 = 30). All TKAs were implanted by the same surgeon and were analyzed using fluoroscopy during a deep knee bend. ResultsAt full extension, all 3 PCR TKAs experienced a more posteriorized position of the femoral condyles compared to the normal knee, with the 2 asymmetrical PCR TKAs experiencing more anteriorization compared to the third, symmetrical PCR TKA. Both the normal knee and the PCR TKA with greatest amount of asymmetry experienced statistically more posterior femoral rollback of the lateral condyle than the other 2 PCR TKAs. The PCR TKA with greater asymmetry also experienced statistically greater range of motion than the other 2 PCR TKAs. ConclusionsWith increasing flexion, the design with the most asymmetry also experienced the most posterior femoral rollback, axial rotation, and greatest range of motion. The results in this study seem to suggest that the inclusion of asymmetry in a TKA could be beneficial for achieving more normal-like kinematics and greater weight-bearing knee flexion.

Effect of single-radius design on in vivo kinematics during stair activities after total knee arthroplasty.

The single-radius design is one of the major total knee arthroplasty (TKA) designs and widely used all over the world. The objective of this study was to compare in vivo kinematics between the anteroposterior (AP) single-radius design with mediolateral (ML) single-radius (Non Restricted Geometry; NRG) and ML dual-radius (Triathlon) during stair activities. A total of 21 knees in 18 patients (NRG group: 10 knees in 7 patients, Triathlon group: 11 knees in 11 patients) with a clinically successful posterior stabilized TKA were examined. Under fluoroscopic surveillance, each patient performed stair ascending and descending motions. In vivo kinematics were analyzed using 2D/3D registration technique. The knee flexion angle, rotation angle, varus-valgus angle, AP translation of the femorotibial contact point for both the medial and lateral sides of the knee, and post-cam engagement were evaluated. There were no significant differences between the two groups in rotation angle and AP translation at each flexion angle. Examining the varus-valgus angle, the NRG group showed varus position at an early flexion angle during both stair activities.Post-cam engagement was observed in both groups during both stair activities. The mean flexion angle of engagement in the NRG group, the post of which was located anterior to the Triathlon, was larger than that in the Triathlon group during both stair activities. Despite the same AP single-radius TKA, ML single-radius might affect varus motion at an early flexion angle.

Variations in Trochlear Morphology of Contemporary and Legacy Total Knee Arthroplasty Prostheses: A Review of 22 Designs

BackgroundThe morphology of the trochlear compartment of total knee arthroplasty (TKA) prostheses is a major determinant of postoperative patello-femoral kinematics, particularly with unresurfaced patellae. The objective of this study was to quantify and compare the trochlear morphology of a large series of contemporary and legacy TKA designs. MethodsThe 3-dimensional surface models of 22 femoral components (13 contemporary and 9 legacy) were created using high-resolution laser scanning. The trochlear profile of each component was analyzed from proximal to distal in 15° increments around the trochlear axis. In each profile, the following variables were measured: sulcus angle, medio-lateral deviation of the sulcus, the height and width of the facets, and the trochlear groove orientation. ResultsIn the contemporary group, the sulcus angle decreased progressively along the trochlear arc to varying degrees, except for 2 symmetrical designs, whereas the sulcus angle of the legacy designs showed considerable variability. The height of the medial facet was very strongly correlated with that of the lateral facet in the contemporary group (R2 = 0.89), whereas the correlation was weak for the legacy designs (R2 = 0.36). Moreover, the trochlear sulcus deviated laterally from distal to proximal in 10 contemporary designs and 7 legacy designs, resulting in a trochlear groove orientation of 4.2 to 11.1° and 4.3 to 10.5°, respectively. In the remaining 5 designs (3 contemporary and 2 legacy), the sulcus was vertical. ConclusionsThere is more consistency in trochlear morphology of contemporary TKA designs compared to that of legacy designs, yet there are still large variations between different designs.

Cementless medial pivot design demonstrates equal or better outcomes compared to cementless cruciate-retaining design following total knee arthroplasty

IntroductionTraditional total knee arthroplasty (TKA) designs fail to reproduce physiologic knee kinematics, which can contribute to patient dissatisfaction. In an attempt to restore more normal knee kinematics, the medial pivot (MP) design may improve knee function and stability as well as patient satisfaction. A limited number of studies have compared postoperative outcomes of exclusively cementless Cruciate-Retaining (CR) TKAs to cementless MP TKAs. We aimed to compare: (1) 90-day, 1-year, and 2-year complications and revisions, (2) preoperative and postoperative range of motion (ROM), (3) Knee Injury and Osteoarthritis Outcome (KOOS-JR), and (4) visual analog scale (VAS) pain scores at 3-month, 6-month, 1-year, and 2-years. MethodsA retrospective analysis was performed to identify all patients who had previously undergone a TKA at our institution and compare a cementless CR system to a cementless MP design. Categorical variables, including demographics, comorbidities, and complications utilized Chi-square tests in bivariable analysis. Continuous variables, such as age, were compared using Student's t-tests. Significance was defined as p < 0.05. ResultsCementless CR and cementless MP cohorts showed low profiles of postoperative complications and favorable patient-reported outcome measures (PROMs). The MP cohort had lower VAS pain at 1-year (1.70 vs. 3.76, p < 0.001) and 2-years (1.43 vs. 2.60, p < 0.001) and higher ROM at 3-months (118 vs. 100, p < 0.001), 6-months (113 vs. 103, p < 0.0001), and 1-year (117 vs. 110, p = 0.02), respectively. ConclusionThis study is the first comparison of postoperative outcomes between a cementless CR TKA and cementless MP TKA designs. Implant design and fixation type are vital components influencing patient satisfaction after TKA. Pain scores and range of motion favored the cementless MP cohort in comparison to the cementless CR cohort.

Cementless metal-backed patellar components in primary total knee arthroplasty using an implant of modern design.

The use of cementless total knee arthroplasty (TKA) components has increased during the past decade. The initial design of cementless metal-backed patellar components had shown high failure rates due to many factors. The aim of this study was to evaluate the clinical results of a second-generation cementless, metal-backed patellar component of a modern design. This was a retrospective review of 707 primary TKAs in 590 patients from a single institution, using a cementless, metal-backed patellar component with a mean follow-up of 6.9 years (2 to 12). A total of 409 TKAs were performed in 338 females and 298 TKAs in 252 males. The mean age of the patients was 63 years (34 to 87) and their mean BMI was 34.3 kg/m2 (18.8 to 64.5). The patients were chosen to undergo a cementless procedure based on age and preoperative radiological and intraoperative bone quality. Outcome was assessed using the Knee Society knee and function scores and range of motion (ROM), complications, and revisions. A total of 24 TKAs (3.4%) in 24 patients failed and required revision surgery, of which five were due to patellar complications (0.71%): one for aseptic patellar loosening (0.14%) and four for polyethylene dissociation (0.57%). A total of 19 revisions (2.7%) were undertaken in 19 patients for indications which did not relate to the patella: four for aseptic tibial loosening (0.57%), one for aseptic femoral loosening (0.14%), nine for periprosthetic infection (1.3%), one for popliteus impingement (0.14%), and four for instability (0.57%). Knee Society knee and function scores, and ROM, improved significantly when comparing pre- and postoperative values. Survival of the metal-backed patellar component for all-cause failure was 97.5% (95% confidence interval 94.9% to 100%) at 12 years. The second-generation cementless TKA design of metal-backed patellar components showed a 97.5% survival at 12 years, with polyethylene dissociation from the metal-backing being the most common cause of patellar failure. In view of the increased use of TKA, especially in younger, more active, or obese patients, these findings are encouraging at mean follow-up of seven years.

Prediction of Total Knee Arthroplasty Sizes with Demographics, including Hand and Foot Sizes.

Introduction Anticipating implant sizes before total knee arthroplasty (TKA) allows the surgical team to streamline operations and prepare for potential difficulties. This study aims to determine the correlation and derive a regression model for predicting TKA sizes using patient-specific demographics without using radiographs. Methods We reviewed the demographics, including hand and foot sizes, of 1339 primary TKAs. To allow for comparison across different TKA designs, we converted the femur and tibia sizes into their anterior-posterior (AP) and medial-lateral (ML) dimensions. Stepwise multivariate regressions were performed to analyze the data. Results Regarding the femur component, the patient's foot, gender, height, hand circumference, body-mass-index, and age was the significant demographic factors in the regression analysis (R-square 0.541, p-value <0.05). For the tibia component, the significant factors in the regression analysis were the thee patient's foot size, gender, height, hand circumference, and age (R-square 0.608, p-value <0.05). The patient's foot size had the highest correlation coefficient for both femur (0.670) and tibia (0.697) implant sizes (p-value <0.05). We accurately predicted the femur component size exactly, within one and two sizes in 49.5%, 94.2%, and 99.9% of cases, respectively. Regarding the tibia, the prediction was exact, within one and two sizes in 53.0%, 96.0%, and 100% of cases, respectively. Conclusion The regression model, utilizing patient-specific characteristics, such as foot size and hand circumference, accurately predicted TKA femur and tibia sizes within one component size. This provides a more efficient alternative for preoperative planning.

Simultaneous Evaluation of Tibiofemoral and Patellofemoral Mechanics in Total Knee Arthroplasty: A Combined Experimental and Computational Approach.

Contemporary total knee arthroplasty (TKA) has not fully restored natural patellofemoral (P-F) mechanics across the patient population. Previous experimental simulations have been limited in their ability to create dynamic, unconstrained, muscle-driven P-F articulation while simultaneously controlling tibiofemoral (T-F) contact mechanics. The purpose of this study was to develop a novel experimental simulation and validate a corresponding finite element model to evaluate T-F and P-F mechanics. A commercially available wear simulator was retrofitted with custom fixturing to evaluate whole-knee TKA mechanics with varying patella heights during a simulated deep knee bend. A corresponding dynamic finite element model was developed to validate kinematic and kinetic predictions against experimental measurements. Patella alta reduced P-F reaction forces in early and midflexion, corresponding with an increase in T-F forces that indicated an increase in extensor mechanism efficiency. Due to reduced wrapping of the extensor mechanism in deeper flexion for the alta condition, peak P-F forces in flexion increased from 101% to 135% of the applied quadriceps load for the baja and alta conditions, respectively. Strong agreement was observed between the experiment and model predictions with root-mean-square errors (RMSE) for P-F kinematics ranging from 0.8 deg to 3.3 deg and 0.7 mm to 1.4 mm. RMSE for P-F forces ranged from 7.4 N to 53.6 N. By simultaneously controlling dynamic, physiological loading of the T-F and P-F joint, this novel experimental simulation and validated model will be a valuable tool for investigation of future TKA designs and surgical techniques.

12-Year clinical and radiological results of a double-blind randomized controlled trial comparing posterior cruciate-retaining versus posterior-stabilized total knee arthroplasty

BackgroundA subject of ongoing debate among orthopedic surgeons is the importance of preserving the posterior cruciate ligament in total knee arthroplasty (TKA), but long-term survival studies are scarce. The aim of this study was to compare long-term survival rates, and clinical and radiological follow up of a double-blind randomized controlled trial comparing posterior cruciate-retaining (PCR) versus posterior-stabilizing (PS) implant design of an AGC TKA. MethodsA total of 114 patients were included in the survival analysis (PCR n = 61; PS n = 53). Forty-five patients (PCR n = 25; PS n = 20) participated in the long-term follow up using patient-reported outcome measures (Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), Short-Form Health Survey (SF-36) and Kujala score (measuring anterior knee pain)). Thirty-one patients were assessed with a physical test (Knee Society Score (KSS)) and radiographs. ResultsOverall survival rate was 95.6% (PCR 98.4% vs. PS 92.5%), with five patients having a major revision (PCR n = 1 vs. PS n = 4, respectively). Satisfying outcome scores for both groups were described at on average 12-year follow up with no significant differences in KSS knee and function scores, WOMAC, SF-36, or Kujala scores between groups. Radiographically, there were no findings of femoral or tibial loosening or polyethylene wear in either group. ConclusionsGood long-term survival rates were described for the PCR and the PS design of an AGC TKA. There were no significant differences in clinical and radiological outcomes between a PCR and a PS design 12 years postoperatively.