Total Coupling Efficiency Research Articles

Power Enhancement and Spot Homogenization Design for Arrayed Semiconductor Lasers.

Improving the spot brightness and uniformity of arrangement of the array laser is conducive to ensuring the beam quality of the fiber laser. Based on the light tracing principle, the optical model performance of two common fiber lasers was first analyzed. Then, a novel rotationally polarized optical model with high power and spot uniformity was designed and optimized on the basis of the aforementioned analysis. The results of the evaluation metrics of the multi-indicator optical model show that the spot uniformity of our proposed model improved by 24.03%, the power improved by 0.55%, and the maximum light distance was shortened from 120 mm to 82.58 mm. Further, the results of the coupling tolerance analysis of the optical elements show that the total coupling efficiency was 89.04%. The coupling power and tolerance relationships did not produce degradation compared with the traditional model. Extensive comparative results show that the designed rotationally polarized optical path model can effectively improve the optical coupling efficiency and spot uniformity of arrayed semiconductor lasers.

High performance DFB laser array combiner enabled by all-dielectric metalens array

Metalens have the advantages of ultra-thin, low loss, easy integration and flexible phase control mechanism, which have attracted intensive attention in the field of on-chip photonic chips. By designing Si nanocylinder meta-atom on SiO2 substrate, the structure size is optimized to achieve the optimal light transmittance and phase change covers the range of 2π. In order to achieve the effect of coupling Distributed Feedback Laser (DFB) array into a fiber, it is necessary to accurately arrange the above optimized Si nanocylinder according to a certain phase profile to achieve the effect of off-axis focusing. Here, we designed an off-axis focusing metalens array to efficiently couple the parallel 4-channel DFB laser array into the few-mode fiber (FMF), and the total coupling efficiency reaches 56.48 %. This result provides a new idea for compact, low loss on-chip light sources.

High-accuracy measurement system for rotor-stator axial clearance in narrow spaces based on all-fiber microwave photonic mixing.

In this paper, a high-accuracy measurement method for rotor-stator axial clearance in narrow spaces is proposed. The optical path structure based on all-fiber microwave photonic mixing is established. To improve the accuracy and expand the measurement range, the total coupling efficiency over the entire measurement range at different working distances of fiber probe was evaluated by Zemax analysis tool and theoretical model. The performance of the system was verified by experiments. The experimental results show that the measurement accuracy of axial clearance is better than 10.5 um within the range of 0.5-20.5 mm. The measurement accuracy has been effectively improved compared to previous methods. Additionally, the probe size is reduced to a mere diameter of 2.78 mm, which is more suitable for axial clearance measurement in narrow spaces inside rotating machines.

Accurate dipole radiation model for waveguide grating couplers

An analytical theoretical model for the waveguide grating coupler is developed and applicable to practical deep gratings. The grating-assisted input coupling efficiency is calculated by considering the reciprocal out-coupling problem. The deep grating structure is modelled as an optical layer filled with polarization dipole sources, and the scattered fields are then calculated using the associated Green’s functions and taking into account the multiple reflections and interference from the adjacent layers. The joint loss between the grating region and the waveguide is also considered. Comparison with numerical simulations shows very good agreement and validates the accuracy of the analytical model. The model explicitly describes the importance of multilayer interference of the scattered fields and guided-mode joint loss on the total grating-assisted coupling efficiency and can be used for practical waveguide grating coupler design with negligible computation workload.

High-Efficiency Directional Excitation of Spoof Surface Plasmon Under Arbitrary Illumination

Recent advances in spoof surface plasmon (SSP) have offered enormous opportunities for engineering electromagnetic waves at the subwavelength scale. However, the fundamental limitation of the extremely finite space channels on exciting SSP challenges their practical applications. Here, to the best of our knowledge, a new method that can realize high-efficiency infinite-channel SSP excitation based on hyperbolic plasmonic metasurfaces is proposed. Free-space propagating waves impinging from arbitrary directions can be coupled to SSP owing to the theoretical perfect wave vector match between the modulated incident waves and the hyperbolic plasmonic metasurfaces. A proof-of-method metacoupler working at 8 GHz is designed and fabricated with the novel functionality numerically and experimentally verified by the consistent guide wavelength with theory. Further experimental investigation reveals a total coupling efficiency exceeding 50% for the impinging waves with incidence angles ranging from -44° to 44°. The proposed methodology provides a new route to design multichannel antennas and detectors.

Optimal Deployment of Antenna for Field Coverage in Coal Mine Tunnels

A deployment strategy for antennas is proposed to enhance the field coverage of wireless devices in underground coal mines, which uses the multimodal approach. Based on the attenuation coefficient of each mode, the propagation loss of the vertically polarized modes with n = 1, 2, and 3 and that of the horizontally polarized modes with m = 1, 2, and 3 are less. For the signal propagation in the near-field region of the source, these modes play significant role. According to the coupling of the antenna to the modes, the significant modes can be effectively excited by mounting horizontally polarized antenna on the ceiling or the vertically polarized antenna on the sidewall. For the signal propagation in the far-field region, the (1, 1) mode is significant, and the horizontally polarized excitation is preferred due to smaller attenuation. By comparing the total coupling efficiency of the antenna-radiated power, stronger excitation power can be obtained by mounting the antenna near the center of the ceiling or that of the sidewall. The field strength in the near-field and far-field region coverage can be maximized by optimizing the antenna polarization and position. For verification, a grid-based test system was designed and a series of measurements inside an underground coal mine tunnel were conducted. The measured results have a good agreement with the theoretical ones. In addition, the EM interference caused by the infrastructure in real mines on the signal received by the antennas at different positions was also measured and compared. Results show that the influences of cables with long-term stable loads, such as power cables and communication cables, can be neglected.

Optimizing free space to few-modefiber coupling efficiency.

We evaluate the coupling efficiency from free space to few-mode fibers (FMF). A theoretical coupling model is developed based on the imaging properties of free-space modes and the inner products between the free-space modes and the FMF modes. Numerical results for six- and ten-mode free-space-to-FMF coupling are presented. It is found that in order to maximize the total coupling efficiency, the size of the highest-order free-space and fiber modes should be approximately matched, and there is an optimum value for the V number of the FMF. In addition, the axial alignment tolerance for free-space-to-FMF coupling is more stringent than for single-mode cases.

Loss mechanism of all-fiber cascaded side pumping combiner

Compared with end pumping fiber combiner, one of the advantages for side pumping combiner is the unlimited pumping points, which means multi-point or cascaded side pumping can be realized. However, the loss mechanism of the cascaded structure is rarely discussed. In this paper, we present the numerical and experimental investigation about the loss mechanism of a two-stage-cascaded side pumping combiner based on tapered-fused technique. The influence of loss mechanism on the coupling efficiency and thermal load of the fiber coating is analyzed according to simulations and experiments with different tapering ratios for the first stage. Based on the analysis, a cascaded component with total pump coupling efficiency of 96.4% handling a pump power of 1088 W is achieved by employing 1018 nm fiber laser as the pump source. Future work to further improve the performance of a cascaded side pumping combiner is discussed and prospected.

Design of 20 W fiber-coupled green laser diode by Zemax**Project supported by the National Key R& D Program of China (No. 2016YFB0402105), the Key Deployment Program of the Chinese Academy of Sciences (No. KGZD-SW-T01-2), and the National Natural Science Foundation of China (No. 61404135).

We represent a design of a 20 W, fiber-coupled diode laser module based on 26 single emitters at 520 nm. The module can produce more than 20 W output power from a standard fiber with core diameter of 400 μm and numerical aperture (NA) of 0.22. To achieve a 20 W laser beam, the spatial beam combination and polarization beam combination by polarization beam splitter are used to combine output of 26 single emitters into a single beam, and then an aspheric lens is used to couple the combined beam into an optical fiber. The simulation shows that the total coupling efficiency is more than 95%.

Grating Couplers With an Integrated Power Splitter for High-Intensity Optical Power Distribution

In this letter, we present a fiber grating coupler with an integrated 16-way power splitter. The incoming light from the fiber is split immediately over 16 channels, and therefore, the total optical power is never confined in a single waveguide. This is of particular interest for silicon photonics platforms, because, here, high optical intensities can cause significant non-linear losses. The device has a total coupling efficiency that is similar to standard focusing grating couplers. Furthermore, a channel non-uniformity below 1.1 dB has been obtained. By studying the alignment sensitivity, we found that for high splitting uniformity, a careful positioning of the fiber is necessary. We also experimentally demonstrate that this device is indeed capable of handling high optical powers without introducing additional non-linear losses.

Quasi-distributed and wavelength selective addressing of optical micro-resonators based on long period fiber gratings.

A novel all-in-fiber method for coupling light to high-Q silica whispering gallery mode (WGM) optical micro-resonators is presented, which is based on a pair of long period fiber gratings (LPGs) written in the same silica fiber, along with a thick fiber taper (15-18 μm in waist) in between the LPGs. The proposed coupling structure is robust and can be replicated many times along the same fiber simply cascading LPGs with different bands. Typical Q-factors of the order of 10(8) and total coupling efficiency up to 60% were measured collecting the resonances of microspheres or microbubbles at the fiber end. This approach uniquely allows quasi-distributed and wavelength selective addressing of different micro-resonators along the same fiber.

Comparison of Structure, Morphology, and Properties of Miktoarms Star Styrene-Butadiene Rubber and Star-Shaped Styrene-Butadiene Rubbe/Polybutadiene Rubber Blends

Four miktoarms star-shaped polybutadiene-Sn-poly(styrene-butadiene) rubber (MSS-PB-PSBR) with 1,1-diphenylhexyl at the ends of the arms were prepared by two different coupling techniques. One technique was a one-step technology, from which two miktoarms star styrene-butadiene rubbers, called AMSS-PB-PSBR, were obtained in which the four arm stars had varying ratios of PB:PSBR arms; another was a two-step technology, from which another two miktoarms star styrene-butadiene rubbers, called BMSS-PB-PSBR, were obtained in which all consisted of PB-Sn-(PSBR)3 stars. The molecular structure parameters and morphology-properties of the four MSS-PB-PSBR were determined and studied, and compared with that of a star-shaped styrene-butadiene rubber (S-SSBR)/poly butadiene rubber (PBR) blend. The results showed that the total coupling efficiency (the ratio of the total number of polymer chains (arms) coupled by SnCl4 to that of the total number of polymer chains) of the MSS-PB-PSBR was higher than 60%. However, the coupling efficiency of the polybutadiene arms of BMSS-PB-PSBR was obviously higher than that of the AMSS-PB-PSBR. Compared with the S-SSBR/PBR blend, MSS-PB-PSBR had a more uniform distribution of the PB phase and a smaller phase size of PB. It was found that MSS-PB-PSBR composites filled with carbon black (CB) had a lower Payne effect than the S-SSBR/PBR/CB composite, with the BMSS-PB-PSBR/CB composites being especially lower. The BMSS-PB-PSBR/CB composites had higher mechanical properties and lower rolling resistance than the AMSS-PB-PSBR/CB composites due to the high coupling efficiency of the polybutadiene arms; the results indicated that the two-step technology was better than the one-step technology for preparing the tread material of “green” tires.

Efficient coupling of propagating broadband terahertz radial beams to metal wires

Bare metal wires have recently been demonstrated as waveguides for transporting terahertz (THz) radiation, where the guiding mode is radially polarized surface Sommerfeld waves. In this study, we demonstrate high-efficiency coupling of a broadband radially polarized THz pulsed beam, which is generated with a polarization-controlled beam by a segmented half-wave-plate mode converter, to bare copper wires. A total coupling efficiency up to 16.8% is observed, and at 0.3 THz, the maximum coupling efficiency is 66.3%. The results of mode-overlap calculation and numerical simulation support the experimental data well.

Optimal VIA Placement in Under Filled Embedded Multimode Waveguides

The self-imaging property of multimode waveguides creates a challenging problem when finding the optimal placement position of an out-of-plane coupler for embedded waveguides. This problem is compounded when the waveguides are coupled using a small input such as a vertical cavity surface emitting laser (VCSEL) or a single mode fiber where only some of the modes are generated. When the waveguide system is under filled, the coupling efficiency for the optical vertical interconnect assembly (VIA) can vary by as much as 6.2 dB depending on the length of the proceeding waveguide due to different output fields from the self-imaging property. This requires sweeping each individual VIA over the entire range of possible coupler positions to find the total maximum coupling efficiency. This process increases in complexity when a VIA supports several parallel channels all having a different optical path length. If a VIA can be placed in a calculated position from the end of a terminated embedded waveguide dependent upon the modal structure then blind pick and place methods may be used. The optimal coupler placement was determined based on smallest average VIA attenuation, smallest attenuation variance, and worse-case alignment scenario.

Silicon based plasmonic coupler

Plasmonics is a field in which the light matter interaction can be controlled at the nanoscale by patterning the material surface to achieve enhanced optical effects. Realisation of micron sized silicon based plasmonic devices will require efficient coupling of light from an optical fibre grating coupler into silicon compatible plasmonic waveguides. In this paper we have investigated a silicon based plasmonic coupler with a very short taper length, which confines and focuses light from a broad input fibre opening into a plasmonic waveguide at the apex of the structure. A simple transfer matrix model was also developed to analyse the transmission performance of the coupler with respect to its key physical parameters. The proposed plasmonic coupler was optimised with respect to its different structural parameters using finite element simulations. A maximum coupling efficiency of 72% for light coupling from a 6.2 μm wide input opening into a 20 nm slit width was predicted. The simulated result also predicted an insertion loss of ≈ 2.0 dB for light coupling into a 300 nm single mode SOI waveguide from a plasmonic structure with a 10.4 μm input opening width and a taper length of only 3.15 μm. Furthermore, the application of the optimised plasmonic coupler as a splitter was investigated, in which the structure simultaneously splits and couples light with a predicted coupling efficiency of ≈ 37 % (or a total coupling efficiency of 73%) from a 6.22 μm input opening into two 50 nm wide plasmonic waveguides.

Integrated fiber-coupled launcher for slow plasmon-polariton waves

We propose and numerically demonstrate an integrated fiber-coupled launcher for slow surface plasmon-polaritons. The device is based on a novel plasmonic mode-converter providing efficient power transfer from the fast to the slow modes of a metallic nanostripe. Total coupling efficiency with standard single-mode fiber approaching 30% (including ohmic losses) has been numerically predicted for a 25-µm long gold-based device operating at 1.55 µm telecom wavelength.

Tapered fused fiber bundle coupler capable of 1 kW laser combining and 300 W laser splitting

A high efficiency 7 × 1 multimode fiber coupler using the method of fusion and tapering is reported. This coupler can be applied to combine laser power, ad it can be used as a 1 × 7 splitter with reversible simultaneously. In the experiment, for combiner, coupling output power of 1032 W is obtained with the input power of 1066 W. The total coupling efficiency is 96.8%. The average insertion loss of each input fiber is 0.14 dB at ∼150 W input power. To splitter, the sum of 7 output ports power is 294 W with the input power of 341 W, and the insertion loss is about 13.8%. This fiber coupler can be applied in pumping all-fiber double clad fiber laser, as well as power combination and splitting of fiber lasers.

Two dimensional silicon waveguide chirped grating couplers for vertical optical fibers

Shallow etched two dimensional gratings for coupling light between silicon-on-insulator nanophotonic waveguides and vertical optical fibers were designed and experimentally characterized. We show that the large second order back reflection could be suppressed effectively by applying a linear chirp in the grating period for two dimensional grating couplers. The total coupling efficiency from an optical fiber to two orthogonal silicon waveguides is independent of the input polarization. An almost linear relationship between the average effective index of the grating region and the fill factor for 1D grating is obtained and verified. We also show that the average effective index for the two dimensional grating is similar to the one dimensional grating with the same fill factor in the light propagation direction, when the fill factor of the etched holes was larger than 0.5.

Design of optical coupling systems between two-dimensional quasi-stadium laser diodes and single-mode optical fibers

Optical coupling systems between a two-dimensional quasi-stadium laser diode and single-mode optical fibers using gradient-index rod lenses are designed for both stable and unstable laser resonators for the first time. A novel numerical approach using a combination of the extended Fox-Li calculation method and Gaussian beam transformations is proposed. In the case of a stable laser resonator, two kinds of beam propagation modes appear, namely the axis mode, in which an optical beam propagates along the cavity axis, and the ring mode, in which optical beams propagate along the diamond-shaped trajectory. The coupling efficiencies are found to be 54% for the axis mode and 52% for the ring mode. In contrast, an unstable laser resonator exhibits complicated modes, in which several highly directional beams are emitted from the end mirrors. The total coupling efficiency for these output beams is calculated to be 9.6%. The 3-dB tolerances for the lens pitch and alignment angles of the gradient-index rod lenses are also discussed.

A high-efficiency in-plane splitting coupler for planar photonic Crystal self-collimation devices

In this letter, we present the design, fabrication, and characterization of a high-efficiency in-plane splitting coupler for planar photonic crystal self-collimation devices. This splitting coupler consists of multiple concatenated in-plane reflective lenses and is capable of efficiently splitting and coupling a wide input beam into multiple narrow self-collimated beams. As an example, a one-to-two splitting coupler is simulated using the two-dimensional finite-difference time-domain method with an effective index used to account for the third dimension. The simulation shows a total coupling efficiency of 86% and a splitting ratio of two channels is 0.51 to 0.49. This device is also experimentally validated and the measured splitting ratio is 0.57 to 0.43.