Total Absorption Research Articles

A fully enclosed wave energy converter and effects of cable-based PTO on power absorption

Abstract Existing wave energy converters (WECs) are limited by high unit energy costs, narrow bandwidths and vulnerability to seawater corrosion, making it difficult for wave energy to compete with solar and wind energy. This paper presents a fully enclosed WEC based on cable-driven parallel mechanisms, which absorbs energy from multiple directions to enhance the total energy absorption efficiency and bandwidth. The configuration of the inner cable-parallel mechanism (CDPM) is the key to this improved absorption efficiency. A configuration synthesis method of cable-driven parallel mechanisms is proposed to generate more configurations for the fully enclosed WEC. The motion equation of the fully enclosed WEC is derived to evaluate the power absorption performance. Moreover, a configuration synthesis method for realizing n-DOF configurations in the fully constrained CDPMs is proposed, and the configurations of these n-DOF fully-constrained CDPMs with (n + 1) cables are acquired. Then, the power absorption performance under different PTO parameters and wave frequencies is calculated, and the effects of the CDPM configuration are investigated. The results indicate that the proposed WECs exhibit excellent performance in mean absorbed power and bandwidth. Several principles for configuration selection are provided to further improve the performance of the CDPM-based fully enclosed WEC.

Ground-state β-feeding determination using total-absorption spectrometers

The determination of the β intensity probability between the ground states of parent and daughter nuclei has traditionally been a difficult task with standard γ-spectroscopy approaches due to the lack of the associated γ emission. In the last years, the total absorption γ-ray spectroscopy technique has successfully proven its ability to deal with this problem by means of different procedures. This article discusses the potential of these methods, and a new approach for segmented total-absorption γ-ray spectrometers is also introduced. An overview of applications is presented based on past, present, and future β-decay experiments.

Total resonant terahertz absorption enabled by a large-scale adjustable admittance inverse matching in a metal groove with graphene

Abstract We propose a tunable terahertz (THz) perfect absorber based on a metal groove with graphene-loaded dielectric resonator and theoretically study its basic properties. The proposed absorber allows switching between the regimes of perfect absorption at the Fabry-Perot resonance excited near the cut-off frequency of the metal groove and almost total reflection away from the resonance by changing the Fermi energy in graphene. For this purpose, we propose a “bottom up” approach which is based on tuning the admittance of input line (the metal groove in our case) instead of the structure admittance in order to reach the perfect admittance matching condition. We demonstrate that this effect can be realized at arbitrary selected frequency in the entire THz range due to the dispersion of incoming wave in metal groove, which ensures a large-scale tunability of its characteristic admittance. As a result, the total absorption can be realized in the Fabry-Perot resonance even in a simple graphene-loaded dielectric cavity for any admittance of graphene layer, which is advantageous as compared to majority of existing THz absorbers with more complicated design.

State primary standard for units of absorbed dose and absorbed dose rate of photon, electron, proton radiation and in carbon ion beams, quantity, fuence, fux density and energy of particles in proton beams and heavy charged particles GET 38-2024

The problem of ensuring the accuracy and traceability of the measurement results of the absorbed dose in carbon ion beams, as well as the measurement results of the amount, fluence, flux density and energy of particles in proton and heavy charged particles beams is considered. Until now, in practice, these values have been measured only by indirect methods. The lack of approved measuring instruments for the quantities under consideration and the metrological traceability of measurement results of these quantities to standards did not allow achieving consistency of measurement methods used in practice and confirming the reliability of the results obtained. To solve this problem, three measuring complexes have been developed and created, which are included in the State Primary Standard of units of absorbed dose and absorbed dose rate of photon, electron, proton radiation and in carbon ion beams, quantity, fluence, flux density and energy of particles in proton and heavy charged particles beams GET 38-2024. The measuring complex for reproducing the unit of absorbed dose in carbon ion beams consists of an adiabatic calorimeter, a thermostating system, a data collection and processing system and a vacuum pumping station. To reproduce the unit of energy of protons and heavy charged particles, a complex has been implemented, which includes a total absorption calorimeter, a data collection and processing system, a vacuum pumping station and a particle count determination system based on the use of a Faraday cup. To reproduce the units of fluence and particle flux density in proton and heavy charged particles beams, a measuring complex has been created containing a Faraday cup, a set of collimators and a low current meter. The schemes, the principles and the results of studies of the metrological characteristics of the developed measuring complexes are described. The results are relevant for the field of radiation therapy and radiation resistance tests of the electronic component base used in the space industry.

Hydrogen Spillover-Bridged Interfacial Water Activation of WCx and Hydrogen Recombination of Ru as Dual Active Sites for Accelerating Electrocatalytic Hydrogen Evolution.

Tungsten carbide (WCx) is a promising alternative to platinum catalysts for hydrogen evolution reaction (HER). However, strong tungsten-hydrogen bond hinders hydrogen desorption while favoring H+ reduction, thus limiting HER kinetics. Inspired by the phenomenon of hydrogen spillover in heterogeneous catalysis, a ruthenium (Ru) doped-driven activated hydrogen migration from WCx surface to Ru is reported. This approach achieved high activity with an ultralow overpotential of 9.0mV at 10 mA·cm-2 and superior stability at an industrial-grade current density of 1.0 A·cm-2 @ 1.65V. In situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS)and operando electrochemical impedance spectra revealed that this exceptional hydrogen production-which surpasses that of previously reported Pt/C catalysts-is attributable to the outstanding ability of WCx to induce water dissociation and hydrogen spillover from WCx to Ru surface. During the HER process, the rigid interfacial water network negatively affected the HER efficiency under alkaline conditions. The WCx sites disrupted this rigid structure, facilitating the contact between activated hydrogen (H*) and WCx sites. Subsequently, H* migrates to Ru surface, where hydrogen recombination occurs to produce H2. This work paves a new avenue for the construction of coupled catalysts at the atomic scale to facilitate HER electrocatalysis.

Influence of rubber aggregates from the recycled tires on the physico-mechanical and durability properties of compressed earth blocks

To meet sustainable development goals, global policies are strongly oriented toward valorizing alternative resources such as local materials and waste from different sectors of activity. This study aims to evaluate the influence of adding rubber aggregates from used/recycled tires (GPU) on the physico-mechanical and durability properties of compressed earth bricks (CEB). The CEB were made with an earthen matrix containing 8% cement, and 0 to 2% mass of GPU. The CEB were cured under ambient conditions (30±5°C) for 28 days. The results showed a real improvement in physical and mechanical performance and durability indicators of CEB with increasing GPU content. The apparent density changed slightly from 1697 kg/m3 to 1733 kg/m3. Total water absorption decreased from 21% to 19% with a slight decrease in water-accessible porosity from 35.7% to 33.1%. The capillary absorption coefficient at 10 minutes also decreased from 14 g/cm2.min1/2 to 10 g/cm2.min1/2 The increase of 29% was noted on the compressive strength in the dry state ranging from 3.5 to 4.5 MPa and of 60% on the compressive strength in the wet state ranging from 1.1 MPa to 1.7 MPa. This resulted in the improvement of the structural efficiency coefficient by 27% ranging from 2080 to 2651 Pa.m3/kg. Abrasion resistance coefficient increased more than 50% ranging from 10.8 to 16.9 cm2/g. By comparing the results to the normative references, the CEB containing GPU can be classified as CEB usable in load-bearing walls in a dry environment and resistant to abrasion.

Light Absorption Properties of Brown Carbon Aerosol During Winter at a Polluted Rural Site in the North China Plain

Brown carbon aerosols (BrC), a subfraction of organic aerosols, significantly influence the atmospheric environment, climate and human health. The North China Plain (NCP) is a hotspot for BrC research in China, yet our understanding of the optical properties of BrC in rural regions is still very limited. In this study, we characterize the chemical components and light absorption of BrC at a rural site during winter in the NCP. The average mass concentration of PM1 is 135.1 ± 82.3 μg/m3; organics and nitrate are the main components of PM1. The absorption coefficient of BrC (babs,BrC) is 53.6 ± 45.7 Mm−1, accounting for 39.5 ± 10.2% of the total light absorption at 370 nm. Diurnal variations reveal that the babs,BrC and organics are lower in the afternoon, attributed to the evolution of planetary boundary layers. BrC is mainly emitted locally, and both the aqueous phase and the photooxidation reactions can increase babs,BrC. Notably, the babs,BrC is reduced when RH > 65%. During foggy conditions, reactions in the aqueous phase facilitate the formation of secondary components and contribute to the bleaching of BrC. This process ultimately causes a decrease in both the absorption Ångström exponent (AAE) and the mass absorption efficiency (MAE). In contrast, the babs,BrC, along with AAE and MAE, rise significantly due to substantial primary emissions. This study enhances our understanding of the light absorption of BrC in rural polluted regions of the NCP.

Nanostructures/TiN layer/Al2O3 layer/TiN substrate configuration-based high-performance refractory metasurface solar absorber

Metasurface solar absorber serves as a kind of important component for green energy devices to convert solar electromagnetic waves into thermal energy. In this work, we design a new solar light absorber configuration that incorporates the titanium nitride substrate, aluminum oxide layer, titanium nitride layer, and the topmost refractory nanostructures. The metasurface absorber based on this configuration can achieve an average spectral absorption of over 91% and a total solar radiation absorption of 91.5% at ultra-wide wavelengths of 300–2500 nm. It is discovered that the excellent performance of the proposed metasurface absorber is attributed to the synergistic effects of surface plasmonic effect and Fabry–Pérot (FP) cavity resonance by comprehensive analysis of the simulated field distributions. Furthermore, the effect of geometrical parameter of the proposed configuration on absorber performance is studied, indicating the proposed configuration possesses a large fabrication tolerance. Moreover, the proposed configuration is not sensitive to the polarization direction and the angle of incident light. It is also found that the use of other refractory metal materials and other shapes as the topmost absorbent nanostructures also have good results with this configuration. This work can offer a universal platform for constructing and guiding the design of refractory metasurface solar absorbers.

Broadband Light Harvesting from Scalable Two-Dimensional Semiconductor Multi-Heterostructures.

Broadband absorption in the visible spectrum is essential in optoelectronic applications that involve power conversion such as photovoltaics and photocatalysis. Most ultrathin broadband absorbers use parasitic plasmonic structures that maximize absorption using surface plasmons and/or Fabry-Perot cavities, which limits the weight efficiency of the device. Here, we show the theoretical and experimental realization of an unpatterned/planar semiconductor thin-film absorber based on monolayer transition-metal dichalcogenides. We experimentally demonstrate an average total absorption in the visible range (450-700 nm) of >70% using <4 nm of semiconductor absorbing materials scalable over large areas with vapor phase growth techniques. Our analysis suggests that a power conversion efficiency of 15.54% and a specific power >300 W g-1 may be achieved in a photovoltaic cell based on this metamaterial absorber.

The Effect of Adding Banana Fibers on the Physical and Mechanical Properties of Mortar for Paving Block Applications

Paving blocks might encounter diverse environmental conditions during their lifespan. The durability of paving blocks is determined by their capacity to endure various exposure conditions. Synthetic fibers have been used in mortar and concrete to improve their properties. This research investigates the influence of including banana fiber (BF) on the physical and mechanical characteristics of mortar. Five different mortar mixes were developed, with varying amounts of BF ranging from 0 to 2% by volume. Testing included ultrasonic pulse velocity, compressive strength, flexural strength, total water absorption, and sorptivity. Specimens were cured for up to 90 days. The results indicate that using 0.5% BF resulted in an improvement in compressive and flexural strength compared to the control mix. There was an increase in total water absorption and the water absorption coefficient in the presence of fibers. There appeared to be good correlations between the compressive strength and the other properties examined.

Gulf toadfish (Opsanus beta) urinary bladder ion and water transport is enhanced by acclimation to higher salinity to serve water balance.

Marine teleosts experience ion gain and water loss in their natural habitats. Among other tissues, the urinary bladder epithelium of marine fishes has been shown to actively transport ions to facilitate water absorption. However, transport properties of the urinary bladder epithelium of marine fishes and its plasticity in altered ambient salinities is relatively under-investigated. We describe urinary bladder epithelium electrophysiology, water flux, and expressions of ion transporters in urinary bladder tissue of Gulf toadfish (Opsanus beta) acclimated to either 35 ppt or 60 ppt seawater. Water absorption in bladder sac preparations increased ~ 350% upon acclimation to 60 ppt. Increases in water transport coincided with a significant ~ 137% increase in urinary bladder tissue mucosal-to-serosal short circuit current (Isc) and a ~ 56% decrease in tissue membrane resistance. Collectively, these metrics indicate that an active electrogenic system facilitates water absorption via Na+ (and Cl-) transport in urinary bladder tissue. Furthermore, pharmacological inhibition of urinary bladder tissue Isc and expression of a suite of ion transporters and channels previously unidentified in this tissue provide mechanistic insights into the transport processes responsible for water flux. Analysis of water transport to overall Gulf toadfish water balance reveals a modest water conservation role for the urinary bladder of ~ 0.5% of total water absorption in 35 ppt and 1.9% in 60 ppt acclimated toadfish. These results emphasize that electrogenic ion transport facilitates water-absorptive properties of the urinary bladder in Gulf toadfish - a process that is regulated to facilitate water homeostasis.

Natural radioactivity and technological properties of kaolinized granite from the Motajica mine, Bosnia and Herzegovina

For the production of ceramic tiles, it is necessary to use high-quality and economical raw materials, which will optimize the properties of the final product and meet the prescribed standards. For this reason, it is necessary to examine the properties of each potential raw material. This paper examines radioactivity and technological properties of kaolinized granite from the Motajica mine, in Bosnia and Herzegovina. Chemical analysis, X-ray diffraction (XRD), and thermal analysis (DTA) were carried out. In order to examine the technological (ceramic) properties of this raw material, ignition tests of the composite obtained by introducing kaolinized granite (with a content of 25 %) into the standard factory series of ceramic tiles were conducted at four selected temperatures (1050, 1100, 1120, and 1150 ℃). Total linear shrinkage, flexural strength, and water absorption were determined for the produced biscuit. Using gamma spectrometry, the activity concentrations of radionuclides 226Ra, 232Th and, 40K were measured, and then the radiation risk for external exposure of workers in the industry was assessed using hazard indices and doses. The radiation risk from the use of manufactured unglazed ceramic tiles in houses was also assessed. Statistical analysis of radionuclides for 100 samples of kaolinized granite was performed using descriptive statistics and hierarchical cluster analysis (HCA). It was observed that the average values of 226Ra, 232Th, and 40K are above the average for building materials in the world and amount respectively to 122 Bq kg−1, 96 Bq kg−1, and 1068 Bq kg−1. All other obtained values indicate that it is a quality raw material that, despite having an increased content of radioactive elements compared to the world average, does not represent a radiological hazard for workers and people who stay indoors on an annual basis. The tested raw material satisfies all technological criteria for further use and can be considered a desirable ingredient of ceramic composites because it can partially or completely replace feldspar.

Investigation of Improving Stability in Desulfurized-Rubber-Modified Asphalt Using Cerium-Stearate Incorporation

To enhance the compatibility of high-content desulfurized-rubber-modified asphalt (DRMA), the innovative selection of cerium hard acid is employed in this study to investigate its impact on the compatibility of DRMA. The results indicate that when the optimal content of cerium stearate is 1%, the compatibility of the modified asphalt is improved. On the microscopic level, it is observed that the total heat absorption of the modified asphalt decreases and thermal storage stability is enhanced as measured by differential scanning calorimetry. On the macroscopic level, it gives the smallest difference in softening point, optimal storage stability, and best compatibility of the modified asphalt. Additionally, dissolution tests and adhesion tests demonstrate that the inclusion of cerium stearate increases the solubility of desulfurized rubber in asphalt and reduces the stripping rate of desulfurized-rubber particles on the asphalt surface, thereby decreasing phase separation and promoting the compatibility of DRMA. Furthermore, rheological tests indicate that cerium stearate improves both high-temperature and low-temperature performance of the modified asphalt. The addition of cerium stearate increases the dynamic shear modulus of the modified asphalt, maintaining good stability and elasticity under shear loading, with minimal change in low-temperature rheological properties and lower temperature sensitivity, indicating the best compatibility at this point. Finally, molecular-dynamics simulation data indicate that the addition of cerium stearate decreases the parameter difference in the dissolution of modified asphalt and enhances the binding energy of the modified asphalt, demonstrating the feasibility of cerium stearate in promoting the compatibility of modified asphalt.

New Eco-Cements Made with Marabou Weed Biomass Ash

Biomass ash is currently attracting the attention of science and industry as an inexhaustible eco-friendly alternative to pozzolans traditionally used in commercial cement manufacture (fly ash, silica fume, natural/calcined pozzolan). This paper explores a new line of research into Marabou weed ash (MA), an alternative to better-known conventional agro-industry waste materials (rice husk, bagasse cane, bamboo, forest waste, etc.) produced in Cuba from an invasive plant harvested as biomass for bioenergy production. The study entailed full characterization of MA using a variety of instrumental techniques, analysis of pozzolanic reactivity in the pozzolan/lime system, and, finally its influence on the physical and mechanical properties of binary pastes and mortars containing 10% and 20% MA replacement content. The results indicate that MA has a very low acid oxide content and a high loss on ignition (30%) and K2O content (6.9%), which produces medium–low pozzolanic activity. Despite an observed increase in the blended mortars’ total and capillary water absorption capacity and electrical resistivity and a loss in mechanical strength approximately equivalent to the replacement percentage, the 10% and 20% MA blended cements meet the regulatory chemical, physical, and mechanical requirements specified. Marabou weed ash is therefore a viable future supplementary cementitious material.

Investigation on the microstructure and compressive behavior of open-cell copper- Al2O3 composite foams

The objective of this study is to evaluate the mechanical behavior and energy absorption characteristics of open-cell copper- Al2O3 composite foams fabricated using polyurethane foam with an average pore size of 1.2 mm and a combination of electroless and electrodeposition methods. During electroplating process, the composite foams were fabricated with varying amounts of Al2O3 particles (0.1, 0.6, 0.8, and 1 g/l) in electrolyte solution. To assess mechanical properties of the fabricated foams, uniaxial compression test was conducted to determine the maximum compressive strength, energy absorption density, efficiency, and specific energy absorption. The content of Al2O3 in the fabricated composite foams was evaluated using energy dispersive X-ray (EDX) analysis, and the microstructure was examined using scanning electron microscopy (SEM). The results indicate that the incorporation of Al2O3 particles significantly improves the mechanical properties of the copper-Al2O3 composite foam. Specifically, in the composite foam with 9.34 vol% of Al2O3 particles, the maximum compressive strength, total energy absorption, specific energy absorption, and energy absorption efficiency reach 1.03 MPa, 6.48 MJ m−3, 1.9 J g−1, and 75%, respectively. This amount of alumina particles enhances the maximum compressive strength and total energy absorption of open-cell copper foam by approximately 30% and 100%, respectively. However, the mentioned parameters slightly decreased with an increasing amount of Al2O3 particles up to 16.32 vol%. These significant improvements in the mechanical properties of these foams make them well-suited for high-strength applications.

Characteristics of Spatiotemporal Changes in China's Carbon Budget at Different Administrative Scales

Currently, scientifically and reasonably specifying carbon emission reduction measures in the context of "double carbon" has become a common concern worldwide. China's administrative divisions have a notable impact on the formulation and implementation of relevant policies. Therefore the carbon emissions must be calculated accurately under China's administrative divisions at different scales. The spatiotemporal change characteristics of absorption and carbon emissions can provide scientific basis for the formulation of reasonable and differentiated carbon emission reduction policies in different administrative regions in China. To this end, this study used multi-source data such as remote sensing and statistics and integrated ecological models, statistics, and GIS space analysis and other methods to analyze the spatiotemporal dynamic change characteristics of carbon emissions and carbon absorption at different administrative scales （provinces, cities, and counties） in China. The results showed that： ① The total carbon absorption of vegetation in China continued to increase from 2000 to 2021 and the average value gradually increased. Differences were observed in spatiotemporal changes in carbon emissions at different administrative scales. The spatiotemporal changes at smaller scales were more evident. Carbon emissions showed obvious spatial differences of "high in the north and low in the south, high in the east and low in the west." ② The spatiotemporal distribution of CPI at the administrative scale was similar to that of carbon emissions and the overall trend was increasing annually. The pressure of carbon emissions on carbon absorption gradually weakened from the east to the central and western regions. ③ Spatiotemporal hotspot analysis showed that the overall spatial distribution of cold and hot spots in China's carbon absorption was as follows： In the spatial pattern of "hot in the east and cold in the west," the spatial distribution of cold and hot spots of carbon emissions showed agglomeration characteristics. The provincial scale was primarily oscillating hotspot whereas municipal and county scales were majorly continuous hot spots. Further results revealed that： ① Carbon absorption in different regions and periods in China showed significant variability, especially in the central and eastern regions. The possibility of offsetting carbon emissions by increasing carbon absorption remains. ② At the same scale, administrative regions （such as different provinces） and lower-level administrative regions at another scale （such as different cities in the same province） showed varying degrees of variability in carbon absorption and carbon emissions. Therefore, taking provincial administrative regions as an example for subsequent formulation considering carbon trading, emission reduction, and other policies, we should first consider the coordination of emissions between different cities in the province and then consider the coordination between provinces, which is expected to better promote the implementation of relevant policies.

Mechanism insights for impedance matching in split-ring resonator topologies under bio-medical scenarios

The utilization of microwave radiation has gained increasing importance in various biological applications. However, a significant challenge remains in the interaction between the microwaves and the human skin, primarily due to the impedance mismatch. Recently, the employment of split-ring resonator (SRR) topologies has become increasingly prevalent for addressing such a problem. Despite this, most existing literatures lack a comprehensive understanding of the underlying mechanisms. In this study, we follow Babinet’s principle and numerically study the dispersion relations of a single-split-ring resonator (S-SRR) and its complementary topology, single-complementary-split-ring resonator (S-CSRR). We focus on conducting the impedance analysis, along with far-field and near-field excitation characterizations. The results indicate that S-CSRR ensures an improved impedance matching, thereby significantly enhancing microwave power flow within the bio-tissue. A 2 × 2 array of S-CSRR is experimentally examined for validation. We demonstrate that the S-CSRR array enhances the total specific absorption rate (SAR) of a deeply-implanted-tumor-phantom by a factor of 1.95. Our work may provide a broader understanding towards impedance matching, which may facilitate the design of more efficient diagnostic tools in bio-medical field.

Unveiling the Structure and Dissociation of Interfacial Water on RuO2 for Efficient Acidic Oxygen Evolution Reaction.

Understanding the structure and dynamic process of interfacial water molecules at the catalyst-electrolyte interface on acidic oxygen evolution reaction (OER) kinetics is highly desirable for the development of proton exchange membrane water electrolyzers. Herein, we construct a series of p-block metallic elements (Ga, In, Sn) doped RuO2 catalysts with manipulated electronic structure and Ru-O covalency to investigate the effect of electrochemical interfacial engineering on the improvement of acidic OER activity. Associated with operando attenuated total reflectance surface-enhanced infrared absorption spectroscopy measurements and theoretical analysis, we uncover the free-H2O enriched local environment and dynamic evolution from 4-coordinated hydrogen-bonded water and 2-coordinated hydrogen-bonded water to free-H2O on the surface of Ga-RuO2, are responsible for the optimized connectivity of hydrogen bonding network in the electrical double layer by promoting solvent reorganization. In addition, the structurally ordered interfacial water molecules facilitate high-efficiency proton-coupled electron transfer across the interface, leading to reduced energy barrier of the follow-up dissociation process and enhanced acidic OER performance. This work highlights the key role of structure and dynamic process of interfacial water for acidic OER, and demonstrates the electrochemical interfacial engineering as an efficient strategy to design high-performance electrocatalysts.

Optimizing and investigating the charging time of phase change materials in a compact-latent heat storage using pareto front analysis, artificial neural networks, and numerical simulations

There's a growing emphasis on adopting eco-friendly energy sources to mitigate greenhouse gas emissions and foster sustainability. While renewable energy sources like solar power offer numerous benefits, they have some limitations. Additionally, storing electricity generated from solar panels can be costly and challenging due to limitations in battery technology and storage capacity. Therefore, phase change material-based thermal energy storage systems offer a promising solution to these challenges. These systems also play a crucial role in enhancing buildings' energy efficiency and sustainability. The dimensionality of these systems affects their performance. Traditional systems often rely on fixed dimensions, leading to non-uniform thermal conditions within the storage medium. To address these challenges, adopting a compact-latent heat storage (C-LHS) mechanism was recommended herein. Besides, some fins were inserted into the C-LHS system to alter the heat transfer dynamics within the device. Three of the critical parameters of the fins were changed to examine their impact on the charging time. Artificial neural networks and genetic algorithms were employed to determine the optimal positioning of fins to minimize the duration of material to get both part (melt fraction of 0.8) and full (melt fraction of 1) melting capacities. Here, the primary aim was to present a predictive model capable of accurately forecasting the charging time of the material. In all the presented finned samples, the entire PCM melted in less than 15,110 s (4 h and 12 min) and was able to fully utilize the energy absorption capacity in latent form, whereas in the non-finned system, only 68.6 % of the material managed to melt within the entire duration of the investigation (5 h). After analyzing the data, two optimal configurations of OS1 and OS2 with the minimum time for melt fractions of 0.8 and 1 were introduced. In the OS2 configuration, it took 16,200 s (4 h and 30 min) to absorb 4929 kJ of energy. The non-finned sample absorbed only 3250 kJ of energy during the same period. In General, OS2 achieved total energy absorption 51.6 % faster than the non-finned sample. Therefore, the introduced system has the potential to increase absorbed energy in the rest of the daylight hours to further amounts by increasing the number of units and employing a larger volume of material.

The frame around a test specimen and its influence on the measured sound absorption coefficient

For most practical cases of reverberation room measurements of sound absorption coefficient according to ISO 354:2003, the standard requires the edges of the test specimen to be covered by a reflective frame. The purpose of this requirement is to keep the edges of the test specimen from absorbing sound. While this statement is consistent with practical measurement results at medium to high frequencies, it has been shown that the low frequency performance of a high-absorbing test specimen worsens when a frame is not in place. To further investigate this phenomenon, a series of reverberation room measurements have been carried out on several variations of a porous absorber test specimen. The goal of the measurements has been to determine whether the size and dimensions of the test specimen affect the test results, and if any such affections are dependent on the presence of a frame. Additionally, the sound absorption area of the frame itself has been measured to elucidate whether the frame is likely to give a significant contribution to the total sound absorption area of a framed test specimen. The results will be presented and discussed in this paper.