Tomography Scanning Techniques Research Articles

A Miniature Raspberry Shaped UWB Monopole Antenna based on Microwave Imaging Scanning Technique for Kidney Stone Early Detection

A Miniature Raspberry Shaped UWB Monopole Antenna based on Microwave Imaging Scanning Technique for Kidney Stone Early Detection

Foreign Object Impact Damage in Ceramic Matrix Composites: Experiments and Computational Predictions

Abstract Foreign object impact of ceramic matrix composite (CMC) materials and components in a gas turbine engine environment could be detrimental to engine performance and hence must be accounted for in the design of such components. This paper is concerned with experiments and computational modeling of foreign object impact phenomenon in silicon carbide (SiC)-based CMC. Controlled impact experiments were conducted on the CMC material using a gas-gun apparatus with spherical hardened steel projectile. The internal damage state within the CMC specimens was assessed using X-ray computed tomography scan technique. The computational modeling involved explicit dynamic finite element (FE) simulation of the impact process wherein either delamination mechanism is modeled or both ply damage and delamination mechanisms are modeled in a coupled manner. The delamination mechanism is modeled explicitly using cohesive-zone (CZ) fracture mechanics approach, whereas, the ply-damage mechanisms are modeled implicitly using simplified continuum damage mechanics approach. The simulation results were found to be in reasonable qualitative and quantitative agreement with the experimental results. Furthermore, it is shown that modeling both the ply damage and delamination mechanisms are essential to predict the correct delamination pattern even for intermediate velocity impacts that leads to predominantly delamination damage. The predictive nature of the modeling approach is demonstrated and approaches to enhance the models are also discussed.

On anisotropic fracture and energy evolution of marble subjected to triaxial fatigue cyclic-confining pressure unloading conditions

To exam the anisotropic deformation and energy evolution characteristics of interbedded marble, cylindrical marble samples cored along angles of 0°, 30°, 60°, and 90° with respect to interbeds were subjected to a triaxial compression experiencing disturbance of the fatigue cyclic-confining pressure unloading (FC-CPU) condition. The triaxial stress disturbance process is divided into three stages: a primary static loading stage, a secondary fatigue cyclic loading stage with the same stress amplitude of 120 MPa, and a confining pressure unloading stage. The deformation, crack pattern and energy conversion were studied using the GCTS RTR 2000 rock mechanical system, post-test X-ray computed tomography (CT) scanning technique, and energy mechanism analysis. Results showthat the interbed orientation has an obvious effect on the deformation and crack pattern of marble. Four kinds of crack patterns are revealed from the CT images, and the crack morphology is the simplest for a sample with a 30° orientation. The interbed structure affects the damage accumulation at the fatigue cyclic stage that controls the final failure behavior. The dissipated energy used to drive the crack propagation is relatively large for marble samples undergoing the stress disturbance test compared to those under conventional triaxial tests. The energy dissipation result is in good agreement with the crack pattern, and it is found that the formation of a curved crack consumes much more energy than straight cracks. Through a series of triaxial compression tests under stress disturbance paths, the mechanism of the effect of interbed orientation on fracture behavior and energy evolution of marble are documented.

In Vivo Measurement of the Human Vitreous Chamber Volume Using Computed Tomography Imaging of 100 Eyes.

PurposeTo accurately measure the vitreous chamber volume (VCV) in humans using high-resolution computed tomography (CT) scanning techniques combined with three-dimensional analysis software. Potential relationships between age, axial length, and VCVs were also explored.MethodsIn this retrospective study, the eyes of 100 healthy individuals were studied. Scans were acquired during clinical care and did not show any signs of orbital pathology. Exclusion criteria included any ocular history. CT scans were acquired with a slice thickness of 0.7 mm, and volumetric analysis was carried out using the MIMICS image analysis software version 19.0 (Materialise, Leuven, Belgium).ResultsThe final sample included 100 eyes from 50 patients (30 women, 20 men). The mean age was 48.67 ± 20.72 years, and the age range was 18 to 91 years. The mean VCV was 4.649.99 ± 0.426.54 mm3 for women and 4.969.0 ± 0.465.20 mm3 for men. We found a significant correlation between age and VCV (P < 0.001), axial length and VCV (P < 0.001), and age and axial length (P < 0.005).ConclusionsThe VCV appears to be greater than the current consensus suggests. This work also suggests that the VCV is associated with age and axial length, indicating that it is dynamic and may change throughout adulthood.Translational RelevanceThis information regarding the volume of the vitreous chamber is useful for our understanding of proper dosage and behavior of agents we commonly insert into the vitreous chamber.

Alteration of Metabolic Profile and Potential Biomarkers in the Plasma of Alzheimer's Disease.

The expending of elderly population worldwide has resulted in a dramatic rise in the incidence of chronic diseases such as Alzheimer’s disease (AD). Inadequate understanding of the mechanisms underlying AD has hampered the development of efficient tools for definitive diagnosis and curative interventions. Previous studies have attempted to discover reliable biomarkers of AD, but these biomarkers can only be measured through invasive (neuropathological markers in cerebrospinal fluid) or expensive (positron emission tomography scanning or magnetic resonance imaging) techniques. Metabolomics is a high-throughput technology that can detect and catalog large numbers of small metabolites and may be a useful tool for characterization of AD and identification of biomarkers. In this study, we used ultra-performance liquid chromatography-mass spectrometry based untargeted metabolomics to measure the concentrations of plasma metabolites in a cohort of subjects with AD (n=44) and cognitively normal controls (Ctrl, n=94). The AD group showed marked reductions in levels of polyunsaturated fatty acids, acyl-carnitines, degradation products of tryptophan, and elevated levels of bile acids compared to the Ctrl group. We then validated the results using an independent cohort that included subjects with AD (n=30), mild cognitive impairment (MCI, n=13), healthy controls (n=43), and non-AD neurological disease controls (NDC, n=31). We identified five metabolites comprising cholic acid, chenodeoxycholic acid, allocholic acid, indolelactic acid, and tryptophan that were able to distinguish patients with AD from both Ctrl and NDC with satisfactory sensitivity and specificity. The concentrations of these metabolites were significantly correlated with disease severity. Our results also suggested that altered bile acid profiles in AD and MCI might indicate early risk for the development of AD. These findings may allow for development of new approaches for diagnosis of AD and may provide novel insights into AD pathogenesis.

Mapping the near-field spin angular momenta in the structured surface plasmon polariton field.

Optical spin angular momenta in a confined electromagnetic field exhibit a remarkable difference with their free space counterparts; in particular, the optical transverse spin that is locked with the energy propagating direction lays the foundation for many intriguing physical effects such as unidirectional transportation, quantum spin Hall effects, photonic Skyrmions, etc. In order to investigate the underlying physics behind the spin-orbit interactions as well as to develop the optical spin-based applications, it is crucial to uncover the spin texture in a confined field, yet it faces challenges due to their chiral and near-field vectorial features. Here, we propose a scanning imaging technique which can map the near-field distributions of the optical spin angular momenta with an achiral dielectric nanosphere. The spin angular momentum component normal to the interface can be uncovered experimentally by employing the proposed scanning imaging technique and the three-dimensional spin vector can be reconstructed theoretically with the experimental results. The experiment is demonstrated on the example of surface plasmon polaritons excited with various vector vortex beams under a tight-focusing configuration, where the spin-orbit interaction emerges clearly. The proposed method, which can be utilized to reconstruct the photonic Skyrmion and other photonic topological structures, is straightforward and of high precision, and hence it is expected to be valuable for the study of near-field spin optics and topological photonics.

All-Glass, Large Metalens at Visible Wavelength Using Deep-Ultraviolet Projection Lithography.

Metalenses, planar lenses realized by placing subwavelength nanostructures that locally impart lenslike phase shifts to the incident light, are promising as a replacement for refractive optics for their ultrathin, lightweight, and tailorable characteristics, especially for applications where payload is of significant importance. However, the requirement of fabricating up to billions of subwavelength structures for centimeter-scale metalenses can constrain size-scalability and mass-production for large lenses. In this Letter, we demonstrate a centimeter-scale, all-glass metalens capable of focusing and imaging at visible wavelength, using deep-ultraviolet (DUV) projection stepper lithography. Here, we show size-scalability and potential for mass-production by fabricating 45 metalenses of 1 cm diameter on a 4 in. fused-silica wafer. The lenses show diffraction-limited focusing behavior for any homogeneously polarized incidence at visible wavelengths. The metalens' performance is quantified by the Strehl ratio and the modulation transfer function (MTF), which are then compared with commercial refractive spherical and aspherical singlet lenses of similar size and focal length. We further explore the imaging capabilities of our metalens using a color-pixel sCMOS camera and scanning-imaging techniques, demonstrating potential applications for virtual reality (VR) devices or biological imaging techniques.

Paleoneurology, auditory region, and associated soft tissue inference in the late Oligocene notoungulates Mendozahippus fierensis and Gualta cuyana (Toxodontia) from central-western Argentina

ABSTRACT Noninvasive computed tomography (CT) scanning techniques performed on the high-quality preserved holotypes of Mendozahippus fierensis (grouped within the paraphyletic ‘Notohippidae’) and Gualta cuyana (Leontiniidae) allowed a thorough description of both endocasts, not only associated with the brain but also with closely related endocranial spaces, which proved to be highly diagnostic among Notoungulata and relevant from a paleobiological perspective. The specimens come from Quebrada Fiera (Mendoza, Argentina), an upper Oligocene locality extensively studied, especially during the last decade. Regarding brain endocast proportions and neocortical complexity, M. fierensis shows morphological affinities to coeval ‘notohippids,’ whereas G. cuyana resembles Leontinia gaudryi. An acute olfaction is inferred from the large olfactory bulbs and piriform lobes. Conversely, evidence concerning the development (and implications) of some necortical areas (i.e., somatosensory cortex and auditory cortex) were inconclusive. The encephalization quotients are around those previously reported for ‘notohippids’ and Toxodontidae Nesodontinae, and slightly lower than in Typotheria (except for Mesotheriidae). Other endocranial traits previously unexplored (such as the transverse diploic communication between the temporal sinuses in M. fierensis and the large temporal sinuses inferred for G. cuyana) show that there is relevant variability within Toxodontia that deserves further research. Extending similar approaches to early diverging taxa will certainly contribute to a better understanding of the morphological evolution of the brain, special sense organs, and associated blood circulation pattern in toxodontians and notoungulates in general.

The Investigation of Permeability Calculation Using Digital Core Simulation Technology

Digital core simulation technology, as an emerging numerical simulation method, has gradually come to play a significant role in the study of petrophysical properties. By using this numerical simulation method, the influence of micro factors on seepage properties of reservoir rock is taken into consideration, making up the shortcomings of the traditional physical experiment. Three-dimensional core images are reconstructed by a computed tomography scanning technique. Different sizes of the sub-region were simulated by three methods including the direct computation of Navier-Stokes equations, the simulation of the pore network model, and the lattice Boltzmann method. The permeability computed by each simulation was compared. After comparison between these three methods, the results of the direct computation method based on Navier-Stokes equations were found to be higher than the other two methods. The pore network model simulation has an obvious advantage on the computation speed and the simulation area. The lattice Boltzmann method shows the low efficiency due to the time-consuming process. At last, the permeability calculated by the three methods is matched by the Kozeny-Carman equation. A more accurate formula can be obtained by a series of numerical simulations, which can be applied to marco-scale simulation.

The radiologist's guide to duplex ultrasound assessment of chronic mesenteric ischemia.

This article reviews the relevant anatomy and physiology of the mesenteric vasculature, familiarizes the radiologist with the accepted diagnostic criteria for mesenteric artery stenosis and its role in the diagnosis of chronic mesenteric ischemia, describes Doppler imaging techniques, and provides protocols for the assessment and surveillance of the mesenteric vasculature before and after revascularization. It also discusses expected changes following revascularization and reviews common post-procedural complications. Duplex sonography plays an important role in the diagnosis and management of chronic mesenteric ischemia (CMI). Establishing a successful diagnosis is dependent upon knowledge of mesenteric arterial anatomy and physiology as well as sufficient expertise in image optimization and scanning techniques. Although there has been a trend toward utilization of other noninvasive [computed tomographic angiography (CTA), magnetic resonance angiography (MRA), and invasive (digital subtraction angiography (DSA)] imaging modalities for assessment of the mesenteric vasculature, a new era of "imaging wisely" raises legitimate concerns about the effects of ionizing radiation as well as potential effects of CT and MR contrast agents. These concerns are obviated by the use of ultrasound, and recently developed techniques, such as contrast-enhanced ultrasound and vascular applications focused on the evaluation of slow flow, have revealed the vast potential of vascular ultrasound in the evaluation of chronic mesenteric ischemia. Duplex sonography is a cost-effective and powerful tool that can be utilized for the accurate assessment of mesenteric vascular pathology, specifically mesenteric arterial stenosis, and for the evaluation of mesenteric arterial system post revascularization.

Evaluation of Different Dialyzers and the Impact of Predialysis Albumin Priming in Intermittent Hemodialysis With Reduced Anticoagulation

IntroductionSystemic anticoagulation is widely used in routine clinical hemodialysis, but can be contraindicated in specific settings. Anticoagulant-free treatment regimens are prone to failure even in chronic intermittent hemodialysis. We quantified fiber blocking in settings of reduced anticoagulation to assess performance of different dialyzers and the potential benefit of albumin priming.MethodsThis crossover study included 10 patients performing 4 hours of hemodialysis at midweek in 7 different settings: that is, using Solacea 19H and FX800, both with regular and half dose of anticoagulation, Evodial 1.3 without systemic anticoagulation, and FX800 (half dose) and Evodial (no anticoagulation) when primed with a human albumin solution. Dialyzer fiber blocking was visualized in the dialyzer outlet potting using a 3-dimensional computed tomography (CT) scanning technique on micrometer resolution.ResultsNo sessions had to be prematurely interrupted because of circuit clotting. The relative number of open fibers post dialysis was not influenced by the reduction of anticoagulation in the Solacea making this dialyzer superior in fiber patency in this setting above both the FX800 with reduced anticoagulation and the Evodial with no anticoagulation. Furthermore, no differences in relative number of open fibers were found in the FX800 and Evodial dialyzers with versus without albumin priming.ConclusionIn situations in which reduced anticoagulation is indicated, the asymmetric triacetate ATA Solacea dialyzer outperforms a dialyzer with a conventional polysulfone membrane (FX800) or with the heparin-coated polyacrylonitrile membrane (Evodial). The use of human albumin to prime the dialysis circuit did not improve dialyzer patency.

Low temperature self-healing character of asphalt mixtures under different fatigue damage degrees

The primary objective of this study is to advance the understanding of the low temperature self-healing character of asphalt mixtures under different damage degrees, thus to determine the effective strategy of asphalt pavement maintenance. Firstly, three kinds of asphalt mixtures are selected to conduct the indirect tensile (IDT) fatigue test to a certain fatigue damage degree at low temperatures, and then the resilient modulus (Mr) at different rest time is measured to quantify the healing potential. Next, the fatigue loading with different intermittent time (0 s, 1 s and 3 s) is applied to determine the impact of intermittent time on healing potential. The results indicate that the descending order of healing potential of asphalt mixtures is: SMA-11 > AC-8 > AC-11 at 5 °C and −5°C. The loading intermittent time has an obvious effect on the fatigue damage state of asphalt mixtures, while the longer the intermittent time, the less the effect on fatigue damage healing. Besides, the fatigue damage state has great influence on its healing potential of asphalt mixture. Under the low damage conditions, the initial healing rate is greater than the long term healing rate. However, the low temperature (−5°C) dramatically reduces the healing rate of asphalt mixtures, and causes their long-term healing rate to stabilize gradually to a very low level. Especially under the high fatigue damage conditions, the healing potential of asphalt mixtures will almost disappear at −5°C. Furthermore, together with meso-scale Computed Tomography (CT) scanning technique, it is found that the internal crack distribution characteristics of different graded asphalt mixtures are different even under the same damage degree, which may explain the differences in the healing potential of asphalt mixtures. The use of a fast two-dimensional (2D) scanning technology further confirms that the crack zones inside the asphalt mixture are gradually shrinking after a period of high temperature healing. Finally, the Grey relational analysis reveals that the healing time has the most significant influence on the healing potential of asphalt mixtures. The gradation type and temperature have the similar influence level on the healing potential. The correlation degree between the fatigue damage degree and healing potential is the smallest compared with the other three factors.

Raking Effects on Aggregate Densification and Channelling in Thickening

Thickening performance is greatly influenced by aggregate densification and channelling development; however, the microstructures of aggregates and channelling are unable to directly observe because of high turbidity mud bed during thickening. Computed tomography scan imaging technique has been introduced to investigate the effects of aggregate densification and channelling in the mud bed samples during unclassified tailings thickening. The samples were prepared through deep-freezing and freeze-drying techniques, immediately after sampling from the operation of a pilot thickener. Based on the information of void ratio, pore-size distribution, and permeability, obtained from 3D reconstruction images of the aggregates structure, aggregate densification and channelling development have been characterized. Channelling patterns have been classified by the size and shape of the connection throat of the pore between aggregates. As the aggregate structure broke and densified, the void ratio and pore size of the mud bed were decreased. Thickening performance enhancement was predicted based on solid flux and permeability of mud bed, and the result indicated raking on aggregate densification and channelling apparently improves the unclassified tailings dewatering extent.

Influence of intensification pressures on pores in die-cast ADC12 alloys

Die casting process is widely applied in making Al parts. However, due to high speed of liquid metal flow in the die cavity, gases are prone to be entrapped in the filling, resulting in porosity defects. The X-ray computed tomography scanning technique was used to detect the pores in die-cast ADC12 alloys with different intensification pressures. The three-dimensional features of pores including pore size, number, sphericity have been obtained. The effect of different intensification pressures on two different kinds of pores, namely gas-pores and shrinkage pores, was analyzed. The results show that with increasing the pressure, the pore fractions and quantity gradually decrease. When the pressure increased to 85 MPa, the pores from gas entrapment during the mold filling were compressed, leading to a lower porosity fraction. The pressure cannot affect the pores in the samples with a thin wall (2 mm) due to a great solidification rate.

Lobithelphusa mexicana Rodriguez, 1982 (Decapoda: Pseudothelphusidae): a reassessment of key characters and systematics.

Lobithelphusa Rodriguez, 1982 is endemic to southern Mexico. Assigned to this monotypic genus is the freshwater pseudothelphusid crab, L. mexicana Rodriguez, 1982. The original description based on an old, dry, male specimen in the collections of the Natural History Museum, London, is brief and the crab was only partially figured. Lobithelphusa mexicana has subsequently never been recorded from Mexico and, consequently, the conservation status of this species is unknown. The type specimen has a complete, but detached left chela; is devoid of the left ambulatory pereiopods 1-3, with the fourth missing the carpus, propodus and dactylus; and its left first gonopod detached but retained in a glass tube kept adjacent to the crab. In spite of this damage the crab is still in remarkably good condition for a specimen registered in 1860. The purpose of this study is to apply computed tomography (CT) scanning techniques on the extant type, including its first gonopod, in order to provide detailed illustrations of the crab. These, in turn, shall be used to re-describe the species in order to help establish the current distribution status of L. mexicana in Mexico, and clarify its systematic position within the Pseudothelphusidae Ortmann, 1893.

Observation on time-effect for the stimulating at Zusanli (ST 36) with minimally invasive embedding with PGLA in the healthy person

To explore the objectivity and time-effect of stimulating effect at acupoint with PGLA in the healthy person, and to provide a basis for the rational interval of minimally invasive embedding of PGLA. Before embedding, 8 h, 3rd, 7th, 10th, 14th day after embedding, medical imaging magnetic resonance imaging (MRI) scanning technique was used to collect local T2WI pressure-lowering and T2-Mapping 8 echoes sequence image of left Zusanli (ST 36) in 8 cases of healthy person. The T2-Mapping 8 echoes sequence image was generated by the relevant software to the T2-Mapping image and the local T2 value was measured. The characteristics of local T2WI pressure-fat image signal intensity and the change of T2 value at left Zusanli (ST 36) with minimally invasive embedding with PGLA were observed and analyzed. ①There was no abnormal signal on the T2WI pressure-fat image on the left Zusanli (ST 36) point before the embedding. The high-signal was seen on the local T2WI pressure-fat image at each time point after embedding, there was no significant difference in local signal intensity between 8 h, 3rd and 7th day after embedding. The local signal intensity decreased on the 10th day after embedding, and the local signal intensity decreased significantly on the 14th day after embedding.②The T2 value at each time point after embedding increased significantly compared with that before embedding (all P<0.01); there was no significant difference in T2 value among the 8 h, 3rd and 7th day after embedding (all P>0.05); there was no significant difference between the T2 value on the 7th and the 10th day after embedding (P>0.05)，the T2 value on the 14th day after embedding was significantly lower than that on the 7th day after embedding (P<0.01). It has a stimulating effect on the local acupoints with minimally invasive embedding with PGLA in the healthy person, and the stimulating effect has certain time-effect. The effective stimulation time is about 2 weeks. The rational interval period for the minimally invasive embedding with the PGLA of the same specification type should be about 2 weeks.

Analysis on meso-damage processes in concrete by X-ray computed tomographic scanning techniques based on divisional zones

Concrete damage characteristics were investigated by X-ray computed tomography (CT) under uniaxial compression. CT imaging was performed to study concrete crack generation, propagation, coalescence, and failure under uniaxial compression. A damage-fracture divisional zone theory was proposed to quantitatively analyze the damage evolution of concrete by CT. The criteria of the divisional zones based on CT images were determined to define the safety, damage, and damage-fracture zones of a concrete specimen. The different region damage evolutions were revealed and analyzed, which lead to descriptions of concrete deterioration mechanisms.

Development of a Homogenous Cement Slurry Using Synthetic Modified Phyllosilicate while Cementing HPHT Wells

Cement slurry segregation has a detrimental impact on the cement matrix efficiency in term of zonal isolation. In this study, synthetic modified phyllosilicate (SMP) dispersant, which is known as laponite RD is suggested to reduce the slurry segregation and enhance the vertical homogeneity of the cement matrix in term of density distribution. Seven cement slurries were prepared with different SMP concentrations using molds with different dimensions based on the targeted test, then cured for 24 h at 140 °C and 3000 psi using a high-pressure and high-temperature curing chamber. After that, the samples’ density distribution was evaluated using a direct density measurement and computer tomography (CT) scan imaging technique, and the effect of SMP on the cement rheological parameters, permeability, and compressive strength and were also evaluated. The performance of SMP was then compared with a commercial dispersant. As a result, 0.3% by weight of cement (BWOC) of SMP is found to considerably reduce the vertical density variation along the cement column to 0.46% compared with a density variation of 4.78% for the slurry with the commercial dispersant. The CT scan images confirmed the vertical homogeneity of the slurry with 0.3% BWOC of SMP. Addition of 0.3% BWOC of SMP increased the yield point of the cement slurry to 60.6 MPa compared with 20.5 MPa for the slurry with 0.25% of the commercial dispersant. Adding 0.3% BWOC of SMP into the cement formulation decreased the permeability by 37.1% compared with the commercial dispersant. The sample with 0.3% BWOC of SMP has a compressive strength of 43.9 MPa.

The accuracy of computed tomography scans for rapid prototyping of canine skulls.

This study’s objective was to determine the accuracy of using current computed tomography (CT) scan and software techniques for rapid prototyping by quantifying the margin of error between CT models and laser scans of canine skull specimens. Twenty canine skulls of varying morphology were selected from an anatomy collection at a veterinary school. CT scans (bone and standard algorithms) were performed for each skull, and data segmented (testing two lower threshold settings of 226HU and -650HU) into 3-D CT models. Laser scans were then performed on each skull. The CT models were compared to the corresponding laser scan to determine the error generated from the different types of CT model parameters. This error was then compared between the different types of CT models to determine the most accurate parameters. The mean errors for the 226HU CT models, both bone and standard algorithms, were not significant from zero error (p = 0.1076 and p = 0.0580, respectively). The mean errors for both -650HU CT models were significant from zero error (p < 0.001). Significant differences were detected between CT models for 3 CT model comparisons: Bone (p < 0.0001); Standard (p < 0.0001); and -650HU (p < 0.0001). For 226HU CT models, a significant difference was not detected between CT models (p = 0.2268). Independent of the parameters tested, the 3-D models derived from CT imaging accurately represent the real skull dimensions, with CT models differing less than 0.42 mm from the real skull dimensions. The 226HU threshold was more accurate than the -650HU threshold. For the 226HU CT models, accuracy was not dependent on the CT algorithm. For the -650 CT models, bone was more accurate than standard algorithms. Knowing the inherent error of this procedure is important for use in 3-D printing for surgical planning and medical education.

An execution in medieval Sicily: Computerised tomography scan analysis and 3D reconstruction of an ancient forensic context

AbstractThe bioarchaeological and forensic approach is increasingly applied in the study of funerary contexts in archaeology. Here, we present a case of an atypical medieval burial recently discovered in Piazza Armerina (Sicily), in which the integrated use of traditional bioarchaeological and forensic anthropology methods was crucial. The skeleton was lying in a prone position and was characterised by a peculiar injury pattern. We recorded six clear stab wound marks on the posterior surface of the sternum. The use of computerised tomography scan and 3D modelling techniques has made it possible to obtain a reliable reconstruction of the cause and modality of death, pointing to the execution of the individual. The importance of this case study is twofold. First, the injury pattern recorded currently constitutes a unicum in the bioarchaeological record. Second, it represents the first well‐documented case of an atypical burial in Sicily.