Titration Experiments Research Articles

A Near-Infrared Fluorescent Probe for Live-Cell Imaging of RNA in the Cancer Cells.

Ribonucleic acid (RNA), a biomolecular compound polymerized by many riboside monomers, is one of the most essential substances in life. Monitoring RNA changes within organisms will play an important role in the diagnosis and treatment of major genetically related diseases. Herein, we synthesized a novel compound QOT-NA as near-infrared probe for imaging RNA in cancer cells. The synthesis method and photophysical properties of the probe were presented. The titration and selectivity experiments demonstrated that the probe detected RNA in vitro. Moreover, the RNA imaging experiments indicated that the near-infrared RNA probe QOT-NA can locate RNA within cancer cells.

Proximity Effects and Aggregation of Hamilton-Receptor Barbiturate Host-Guest Complexes Probed by Cross-Metathesis and ESI MS Analysis.

The molecular environment around supramolecular bonding systems significantly affects their stability and the assembly of host-guest complexes, most prominent for hydrogen bonds (H-bonds). Hamilton receptor-barbiturate host-guest complexes are well-known in solution, typically forming a 1:1 molar ratio complex. However, within a polymer matrix, these complexes can form higher-order assemblies, deviating from the standard 1:1 complex, which are challenging to characterize and often require lab-intensive methods. In this study, a novel Hamilton receptor (H) was equipped with cyclopentene moieties and used as a host to form host-guest complexes (H-B) with allobarbital (B), followed by covalent crosslinking. UV-Vis spectroscopy titration experiments in different solvents and at various temperatures revealed that polar solvents containing additional H-bonding sites significantly reduce the formation of the 1:1 H-B complex, as indicated by a reduced association constant. Higher-order aggregates (HH-dimer, HHH-trimer) were subsequently detected via an alkene cross-metathesis (CM) reaction to fix the assemblies covalently, followed by analysis via electrospray ionization mass spectrometry (ESI MS). This two-step method, firstly via CM fixation followed by ESI MS, was extended to study the H-B model complex within a polyisobutylene (PIB) matrix, presenting a direct method to analyze the complex host-guest assembly in solvent-free (polymer) environments.

Gadolinium-Sensitive Artificial Nanochannel Membrane for Information Encryption.

Inspired from ion channels in the myelinated axon of Xenopus laevis found to be affected by gadolinium on axonal currents, we present a solid nanochannel membrane sensitive to gadolinium (Gd3+), which can be achieved via the use of the macrocyclic triacetic acid derivative in the host-guest chemistry approach. The macrocyclic nanochannel has good responsiveness toward Gd3+, even at the nanomolar concentration level, evidenced by discernible changes in rectification, ionic conductance, and XPS analyses. Notably, the Gd3+-sensitive nanochannel membrane can be switched by the addition of a diethylenetriaminepentaacetic acid (DTPA) derivative. Further studies have indicated that the gated behavior of Gd3+ in the nanochannel can be attributed to the strong binding strength between DO3A and Gd3+, which induces a surface charge reversal within the nanochannel. The mechanism has been confirmed through several experimental techniques, including isothermal titration calorimetry (ITC) experiments, fluorescence titration experiments, and finite element analysis. Based on its Gd3+ responsiveness of the constructed ion channel, we successfully developed an advanced multilevel information encryption application of the artificial solid nanochannel membrane. Furthermore, it is anticipated that a more effective encryption system will be built by utilizing the bionic ion channel system's ease of use and straightforward functionalization.

Heterocyclic-based Optical Responsive Chemosensors for the detection of Arsenite and Phosphate in semi-aqueous medium: Application in Logic gate operations, RGB tool, and DFT studies

Highly selective and sensitive organic chemosensors S2R1-S2R3 were synthesized using thienyl-substituted pyridine derivative and characterized by various spectroscopic techniques. The effect of substituents on selectivity is observed in the chemosensors S2R1 through S2R3, with the rate of reactivity toward ions following the trend as -NO2 > -CN > -OCH3 group. The chemosensor S2R1 exhibited selectivity towards arsenite and phosphate, achieving a Limit of Detection (LOD) of 0.2672 ppm and 0.5042 ppm, respectively, in 30% aq. (CH3)2SO solution. It was also observed that S2R2 was selective for PO43− ions in 100% (CH3)2SO solution with an LOD of 0.521 ppm. The spectral redshifts observed in the organo-aqueous media potentializes the sensor to be colorimetrically active. The probe S2R1 showed the lowest LOD and high binding constant with AsO2− and PO43− ions. Other characterization techniques, such as electrochemical studies, 1H-NMR titration, UV-visible titration, and DFT experiments, demonstrated the sensing mechanism of arsenite and phosphate ions with the chemosensors through an intermolecular hydrogen bonding and intermolecular charge transfer (ICT) process followed by its practical applicability for real world-sensing.

Novel quinoline-based chemosensor as specific fluorescence sensing of copper ions in cancer cells and for organelle-specific imaging application

This work reports a simple synthesis of a quinoline-based organic molecule, (E)-N′-((6-methoxy-2-oxo-1,2-dihydroquinolin-3-yl)methylene) picolinohydrazide (PHMQ), and its ability to distinguish Cu2+ ion. Through the use of spectroscopic and photometric titration techniques, PHMQ’s selectivity toward various cations and anions was examined. In just two minutes, PHMQ showed fast detection of Cu2+ ions, and clear spectral fluctuations proposed persistent PHMQ-Cu2+ complex formation. The calculated emission quenching constant (1.46 × 105 L/mol) and binding constant (1.25 × 104 L/mol) values suggested that strong emission quenching occurs between the PHMQ and Cu2+ ions. A linear reduction in fluorescence response was noted for Cu2+ ions concentrations between 2–26 μM, with a detection limit of 43.4 nM. Job’s plot, ESI-mass, NMR titration experiments, and density functional theory (DFT) simulations established a 1:1 stoichiometry for the PHMQ-Cu2+ complex. Additionally, PHMQ was efficaciously utilized to quantify Cu2+ ions in drinking and tap water samples and HeLa cells, illustrating durable cellular penetrability and a fluorescence ’Turn-Off’ response to Cu2+ ions. This sensor also established usefulness in mitochondrial-targeted imaging. For the detection of Cu2+ ions in biological and environmental environments, PHMQ is a promising detector due to its high sensitivity, selectivity, and quick response.

A Terbium‐Based MOF as fluorescent probe for selective sensing of nitrobenzene and Fe3+

A three‐dimensional metal‐organic framework named as [TbL(OH)2](COOH)3·(solvent)x (Tb‐MOF), was successfully obtained by using Tb(NO3)3·6H2O and 1,1′,1″‐(2,4,6‐trimethylbenzene‐1,3,5‐triyl)tris(methylene)‐tris(4‐carboxy‐pyridinium)tribromide (H3LBr3) as raw materials. A series of fluorescence detection experiments demonstrate that Tb‐MOF shows a fluorescence quenching effect on NB. Moreover, Tb‐MOF also exhibits a very fast fluorescence quenching response to trace Fe3+ ions, which is unaffected by the existence of other competitive metal cations. The linear curve between the fluorescence intensity of Tb‐MOF and the concentration of Fe3+ was plotted by the fluorescence titration experiments data. The calculated LOD for Fe3+ ions is 2.86 × 10‐6 M. Therefore, based on the characteristics of Tb‐MOF, it can be regarded as a luminescent sensor for detecting NB and Fe3+. We have also explored the quenching mechanism of Tb‐MOF as a fluorescent sensing material.

Aromatic Ring-Fused Amidine Based Allosteric Receptors Activated by Guest-Induced π-Conjugation Switching.

Amidine-substituted allosteric receptors 2a and 2b for benzenediols were synthesized. Receptor 2a with five-membered amidines exhibited greater allostericity than the amide-substituted receptor 1, while 2b with six-membered amidines exhibited less allostericity. NMR titration experiments revealed that a significant enthalpic factor was involved in the allostericity of these receptors. X-ray and DFT optimized structures of 2a and 2b revealed that 2a adopted a coplanar conformation with π-conjugation between the amidines and the phenylene ring of the hydrindacene framework, resulting in high allostericity due to inactivation of the initial binding.

Conjugated Polymers Based on Carbazole and Tridentate Ligands as the "On-Off-On" Fluorescent Probes for Detection of Ni (II) Ion and Lysine.

Two novel conjugated polymers (polymer 1 and polymer 2) containing trisheterocyclic systemsand carbazole as the copolymerization unit were synthesized by the Suzuki coupling reaction and characterized using NMR spectroscopy and other methods. 4'-(3,5-Dibromophenyl)-2,2':6',2''-terpyridine and 2,2'-(4-(3,5-dibromophenyl)pyridine-2,6-diyl)dithiazole were used as the recognizing units of the two polymers respectively. The polymers show blue-violet fluorescence when dissolved in THF. The ability of the polymers to identify anions and metal ions was investigated by fluorescence sensing tests. It was found that I- not only quenched the fluorescence but also undergone some redshift. Ni (II) efficiently quenched the fluorescence of the polymers, and polymer 2 recognized Ni2+ with higher specificity. UV-visible absorption titration experiments showed that Ni2+ formed complexes with the polymers. In addition, the formation of complexes between Ni2+ and polymers were used for the detection of amino acids, and it was found that lysine could regenerate the fluorescence of [polymer 1-Ni2+] and [polymer 2-Ni2+] with 99% fluorescence recovery.

On the Replicability of the Thermodynamic Modeling of Spectroscopic Titration Data in the Nickel(II) En System

ABSTRACTCharacterizing complicated solution phase systems in situ requires advanced modeling techniques to capture the intricate balances between the many chemical species. Due to the error inherent in any scientific measurement, a spectrophotometric titration experiment with nickel(II) and ethylenediamine (en) was repeated six times using an autotitrator to test the replicability of the data and the consistency of the resulting thermodynamic model. All six datasets could be modeled very tightly (R2 > 99.9999%) with the following eight complexes: [Ni]2+, [Ni2en]4+, [Nien]2+, [Ni2en3]4+, [Nien2]2+, [Ni2en5]4+, [Nien3]2+, and [Nien6]2+. The logK values for the stepwise associative reactions agree with existing literature values for the majority species ([Nienn = 1–3]2+) and matched expectations for the minority species; 95% confidence intervals for each logK value were determined via bootstrapping, which quantifies the variability in the binding constant value that is supported by a given dataset. The repeated experiments, which could not be successfully concatenated together, demonstrate that replication is crucial to capturing all the variability in the logK values. Conversely, bootstrapped confidence intervals across multiple experiments can be readily combined to generate an appropriate range for an experimentally determined binding constant.

Co(II), Ni(II), and Cu(II) Ternary Complexes With 2,6‐Pyridinedicarboxylic Acid and 2,2′‐Bipyridyl: Synthesis, Characterization, DNA Binding, Photo‐Cleavage, and Antimicrobial Studies

ABSTRACTThe interaction of 2,6‐pyridinedicarboxylicacid (PDA) and 2,2′‐bipyridyl (Bipy) with Co(II), Ni(II), and Cu(II) ions produced new ternary complexes [M (PDA)(Bipy)(H2O)] (M = Co(II), Ni(II), and Cu(II)), which were studied by elemental, spectral (FT‐IR, Mass, UV–Vis), and thermal analysis, and their interaction with Ct‐DNA was thoroughly studied using various methods, including absorption spectroscopy, fluorescence spectroscopy, and viscosity measurements. Spectrophotometric titration and viscosity measurements indicated that all the complexes bind to DNA via the groove mode of binding. The salt‐dependent binding of ternary metal complexes to Ct‐DNA has been studied by a UV–Vis spectrophotometric titration experiment. Furthermore, photocleavage studies were used to examine how the metal complexes interacted with the pBR322 DNA, and the results proved that these compounds have obvious photo cleavage properties. The biological effects were studied by antibacterial activity.

A Turn‐On Fluorescence Probe Based on a New Salamo‐Co (II) Coordination Polymer for Tyrosine Detection and Its Application in Water Samples

ABSTRACTA novel salamo‐Co (II) coordination polymer probe CP was synthesized firstly, and its crystal structure, [Co3(L)2(PTA)(H2O)2]n·4nDMF, was determined by X‐ray diffraction analysis. The probe has a rare aggregation‐induced luminescence enhancement (AIEE) effect. When applied to amino acid detection, it was found to have a high selective recognition of tyrosine. With the increase of tyrosine, the fluorescent strength of the probe was enhanced in a short period of time. In addition, the binding ratio of probe to Tyr was determined by fluorescence titration experiment, and the detection limit LOD of probe CP for Tyr was calculated to be 2.57 × 10−9 M, and the binding constant Ka was 2.96 × 105 M−1. According to UV absorption spectrum, FT‐IR spectra, ESI mass spectrometry, and DFT calculation, it was speculated that Tyr can bind to the probe after adding Tyr into the probe solution, triggering FRET and ICT effects, resulting in increased fluorescence intensity and blue shift, and finally achieving the specific recognition of tyrosine by probe CP. Finally, the practical application of probe CP was studied. Through strip test and real water sample test, it was found that the probe can be used for qualitative and quantitative analysis of tyrosine.

Water-Based Polyurethane Dispersions: A Detailed Analysis of the Particle Charge Using Soft and Hard Particle Model.

Water-based polyurethane dispersions (PUDs) show a characteristic dependency of the electrophoretic mobility on the electrolyte concentration, which can be investigated by hard and soft particle models. For this purpose, additional information can be obtained by determining particle charges and electrostatic potentials. PUDs with different contents of an intrinsic ionic stabilizer and various polyol components were synthesized according to the acetone process. The particle charge was characterized by potentiometric acid-base titration, and the data of the titration curve were fitted assuming multiple functional groups with adaptable acid strengths. To investigate the electrostatic potentials, electrophoretic mobilities were measured as a function of electrolyte concentration and analyzed by soft and hard particle theory. Acid-base titration experiments indicated that not all detected ionic groups are located on the surface but are partly arranged inside the polymer particle, as evidenced by a significant decrease of the corresponding effective dissociation constant. The evaluation of the titration data and the electrokinetic experiments showed that the soft particle model of Ohshima is not suitable to reflect the actual particle charge. In contrast, the hard particle model can describe the measured electrophoretic mobility of the dispersions very well if the relaxation effect is taken into account. The dependency of the corresponding zeta potentials on the electrolyte concentration can be excellently modeled assuming a constant surface potential ψ0 and distance of the shear plane xs. Reasonable results are obtained for both parameters with only minor differences between the PUD series. Nonetheless, the electrokinetic surface charge densities calculated with respect to the surface potential are lower than expected from the titration results. Although our results indicate a more complex charge distribution in a peripheral layer, the hard particle model currently shows the best description of the electrokinetic behavior of the PUDs.

Investigation of cytotoxic indoleninyl-thiobarbiturate zwitterions as DNA targeting agents

A series of indoleninyl-thiobarbiturate zwitterions were synthesized in up to 83 % yields from the Knoevenagel condensation between N-substituted diformyl indolenine and thiobarbiturate. The structures were characterized by spectroscopic methods such as NMR (1H, 13C), FT-IR, high-resolution mass spectrometry (HR-MS) and elemental analysis. However, their physicochemical properties and biological activities remain elusive. Herein, results from in silico ADMET calculations and cytotoxicity predictions suggest that all zwitterions are likely to exhibit a higher bioavailability and more specific cytotoxicity than doxorubicin. The notably high predicted cytotoxicity of 2d and drug-likeness score of 2f may be linked to the position of the fused benzene ring and methoxy groups, respectively. The initial biological assessment of these compounds began with in vitro DNA-binding studies because the treatment of numerous diseases such as cancer and bacterial infections is linked to DNA interactions. Zwitterion 2f demonstrated the most significant spectral change in DNA binding studies, suggesting a possible role of the methoxy group in inducing DNA binding activity. The hypothesis that 2f interacts with DNA through groove binding was confirmed by observations made during salt-back titration and DNA denaturation experiments. It was anticipated that the non-zwitterionic 2f would interact more stably with DNA (PDB code: 453D) at the minor groove than its zwitterionic form based on molecular docking calculations and molecular dynamic (MD) simulations. Additionally, the MTT assay demonstrates that 2f is moderately cytotoxic to the human breast cancer cell line MDA-MD-231, most probably as a result of the previously stated DNA binding mechanisms. Overall, the computational and in vitro data suggest the potential application of 2f as a cytotoxic DNA-targeting agent.

Synthesis and spectroscopic studies of triazole-based macroheterocycles containing eudesmane-type sesquiterpenoid moieties

Chiral recognition is one of the most important and fascinating areas in supramolecular chemistry. Chiral macrocycles, especially chiral macrocyclic hosts, having stable structures, adjustable internal cavities to encapsulate and complexation have been developed during the last decade. Attention has been paid on the synthesis of covalently linked of rigid units on the side chain of macrocycles with active binding motifs. In this study, new synthetic protocols has been developed for preparation of optically active triazole-based macrocyclic compounds in which eudesmane-type sesquiterpene lactones act as pendent moieties by the implementation of the copper(I)-catalyzed azid-alkyne cycloaddition strategies. The described protocols provided mild reaction conditions, high yields and high atom- and step-economy. New macrocycles with hanging dihydroisoalantolactone units, different combinations of heteroatoms, and ring sizes in the range of 16–36 atoms were characterized by NMR and UV–vis spectroscopy and mass spectrometry analysis. The molecular structures and intermolecular interactions of two new macrocyclic compounds were elucidated using single-crystal X-ray crystallography. Upon addition of Mg(II) or Zn(II) cations to these novel ligands, using titration experiments we observed the formation of 1:1 (16:Mg2+) complexes and 1:1 to 2:1 (16:Zn2+) complexes, respectively, according to stoichiometry. The result suggests that dihydriisoalantolactone and triazole units within the molecules formed complexes with Mg (II) and Zn (II) ions in solution.

Deep-Saddle-Shaped Nanographene Induced by Four Heptagons: Efficient Synthesis and Properties.

The construction of multiple heptagonal rings in nanographene is the key step for obtaining exotic carbon nanostructures with a negative curvature and intriguing properties. Herein, a novel saddle-shaped nanographene (1) with four embedded heptagons is synthesized via a highly efficient one-shot Scholl reaction from a predesigned oligophenylene precursor. Notably, a quadruple [6]helicene intermediate was also obtained and isolated by controlling the Scholl reaction conditions. Interestingly, the single crystal structures of 1 display a saddle geometry induced by the four embedded heptagons, resulting in a deep curvature with a width of 16.5 Å and a depth of 8.0 Å. Theoretical calculations at the molecular level suggest a weak antiaromatic character of the heptagons in 1. Remarkably, compound 1 exhibits dual fluorescence from S1 and S2. The deep-saddle-shaped geometry in 1 defines host-guest interactions with fullerenes, which were explored in titration experiments and by theoretical methods. The resulting 1@C60 are stable and are subject to an electron transfer from photoexcited 1 to C60. Our current study underscores the influence of heptagon rings on the photophysical, self-assembly, and electron-donating properties of NGs.

Human CSTF2 RNA Recognition Motif Domain Binds to a U-Rich RNA Sequence through a Multistep Binding Process.

The RNA recognition motif (RRM) is a conserved and ubiquitous RNA-binding domain that plays essential roles in mRNA splicing, polyadenylation, transport, and stability. RRM domains exhibit remarkable diversity in binding partners, interacting with various sequences of single- and double-stranded RNA, despite their small size and compact fold. During pre-mRNA cleavage and polyadenylation, the RRM domain from CSTF2 recognizes U- or G/U-rich RNA sequences downstream from the cleavage and polyadenylation site to regulate the process. Given the importance of alternative cleavage and polyadenylation in increasing the diversity of mRNAs, the exact mechanism of binding of RNA to the RRM of CSTF2 remains unclear, particularly in the absence of a structure of this RRM bound to a native RNA substrate. Here, we performed a series of NMR titration and spin relaxation experiments, which were complemented by paramagnetic relaxation enhancement measurements and rigid-body docking, to characterize the interactions of the CSTF2 RRM with a U-rich ligand. Our results reveal a multistep binding process involving differences in ps-ns time scale dynamics and potential structural changes, particularly in the C-terminalα-helix. These results provide insights into how the CSTF2 RRM domain binds to U-rich RNA ligands and offer a greater understanding for the molecular basis of the regulation of pre-mRNA cleavage and polyadenylation.

A Bis(Acridino)-Crown Ether for Recognizing Oligoamines in Spermine Biosynthesis.

Oligoamines in cellular metabolism carry extremely diverse biological functions (i.e., regulating Ca2+-influx, neuronal nitric oxide synthase, membrane potential, Na+, K+-ATPase activity in synaptosomes, etc.). Furthermore, they also act as longevity agents and have a determinative role in autophagy, cell growth, proliferation, and death, while oligoamines dysregulation is a key in a variety of cancers. However, many of their mechanisms of actions have just begun to be understood. In addition to the numerous biosensing methods, only a very few simple small molecule-based tests are available for their selective but reversible tracking or fluorescent labeling. Motivated by this, we present herein a new fluorescent bis(acridino)-crown ether as a sensor molecule for biogenic oligoamines. The sensor molecule can selectively distinguish oligoamines from aliphatic mono- and diamino-analogues, while showing a reversible 1:2 (host:guest) complexation with a stepwise binding process accompanied by a turn-on fluorescence response. Both computational simulations on molecular docking and regression methods on titration experiments were carried out to reveal the oligoamine-recognition properties of the sensor molecule. The new fluorescent chemosensor molecule has a high potential for molecular-level functional studies on the oligoamine systems in cell processes (cellular uptake, transport, progression in cancers, etc.).

A naphthalimide-based bifunctional fluorescent probe for detecting CN− and alkaline pH and its application in food samples and living cells imaging

Cyanide (CN−), as one of the most deadly toxic substances, has further promoted the development of fluorescent probes for identifying it, but the fluorescent probes capable of simultaneously identifying cyanide and alkaline pH have always been a problem. Herein, we have synthesized a novel bifunctional fluorescent probe NCCQ for detecting CN− and alkaline pH. After the reaction of probe NCCQ with CN−, the fluorescence quenching phenomenon occurred obviously, and the quenching efficiency reached 82.7 %. NCCQ is sensitive to CN− (LOD = 44.5 nm), has good selectivity and excellent anti-interference, and can realize rapid response to CN− (50 s). Due to the uncertainty of CN− addition, we further determined the product structure after CN− addition through theoretical calculation. In alkaline pH environment, the fluorescence intensity was further enhanced and red shifted by 14 nm, and the color changed from cyan to bright green. Through mass spectrometry titration experiment, 1HNMR titration experiment and theoretical calculation, the mechanism of detecting CN− and alkaline pH with NCCQ is fully and multi-dimensionally proved. To our surprise, NCCQ can not only be used to detect CN− in real water samples and food samples, but also be used to make bifunctional fluorescent test strips with good results. Due to its good biocompatibility, NCCQ has been successfully applied to the biological imaging of exogenous CN− in Hela, which further proves its great application potential in the fields of environment, food and biological analysis.

Constructing ESIPT-Capable α-Cyanostilbene Luminogens: Influence of Different Aromatic Substitutions Tethered to H-Acceptor (CH = N) on Photophysical Properties, Cu2+ and Fe3+ Detection.

Herein, two excited-state intramolecular proton transfer (ESIPT)-capable α-cyanostilbene luminogens were synthesized by Schiff base reaction of salicylaldehyde-like α-cyanostilbene candidate with 1-naphthylamine and 3-biphenylamine, respectively. We systematically analyzed their photophysical properties compared with their analogue, and demonstrated that their fluorescence behaviors could be elaborately modulated by different aromatic substitutions tethered to H-acceptor (CH = N). In virtue of the outstanding solid fluorescence, the 3-biphenylamine-decorated fluorophore was applied for monitoring Cu2+/Fe3+ qualitatively on the TLC-based test strip in real time and sensing Cu2+/Fe3+ quantitatively in the THF/H2O medium (fw = 90%, pH = 7.4). When the probe chelated with Cu2+/Fe3+, similar "turn-off" fluorescence signal outputs were triggered. From the fluorescence titration experiments, the detection limits were evaluated as 7.97 × 10- 8 M for Cu2+ and 8.24 × 10- 8 M for Fe3+, and the binding constant (Kα) values of the complexes were found to be 7.80 × 104 M-1 for Cu2+ and 9.06 × 104 M-1 for Fe3+. Job's plots indicated that probe complexed with Cu2+/Fe3+ in a 2:1 binding stoichiometry ratio. Furthermore, the probe was used to accurately quantify the Fe3+ spiked in real water specimens. This study offered a new perspective to construct ESIPT-capable α-cyanostilbene luminogen as the potential luminescent probe.

Enhanced Efficiency of Amide‐Substituted Quinuclidine‐Boranes as Hydridic Hydrogen Atom Transfer Catalysts for Photoinduced Hydroalkylation of Unactivated Olefins†

Comprehensive SummaryAn amide‐substituted quinuclidine‐borane has been identified as a more efficient hydridic hydrogen atom transfer (HAT) catalyst for the hydroalkylation of unactivated olefins under visible‐light irradiation. 1H NMR titration experiments reveal that the amide moiety of the quinuclidine‐borane catalyst forms stronger hydrogen bonds with the carbonyl substrates, thereby improving the reaction yields. Furthermore, it was found that the reaction yields correlate well with the association constant between the quinuclidine‐borane catalyst and the carbonyl substrate. A scale‐up reaction using a continuous‐flow photoreactor has also been demonstrated.