Tissue Material Research Articles

Platelet Proteome Reveals Novel Targets for Hypercoagulation in Pseudoexfoliation Syndrome.

Pseudoexfoliation syndrome (PEX) is characterized by the accumulation of abnormal extracellular matrix material in ocular and non-ocular tissues, including blood vessel walls. Clot-forming dysfunction might be responsible for venous thrombosis in PEX. We investigated global coagulation, the proteome, and functions of platelets in PEX patients and aimed to determine prognostic biomarkers for thrombosis risk in PEX. Peripheral blood was collected from PEX and retinal vein occlusion (RVO) patients, and age-sex matched controls. Viscoelastic hemostasis was evaluated by rotational thromboelastometry (ROTEM). Platelet markers (CD41, CD42, CD61, and CD62p) and endothelial markers (P-selectin, E-selectin, and von Willebrand factor) were investigated by flow cytometry and ELISA, respectively. The platelet proteome was analyzed by 2D fluorescence difference gel electrophoresis followed by mass spectrometry. Clot formation time (CFT) is significantly reduced in PEX patients compared to the controls (p < 0.05). P-selectin levels were higher in PEX patients than in controls (p < 0.05); E-selectin and von Willebrand factor remained unchanged. The monitorization of CFT by ROTEM, and soluble P-selectin, may help assess thrombotic risk in PEX patients. Proteomic analysis revealed differential expression of Profilin-1 in platelets. Profilin-1 regulates the stability of actin-cytoskeleton and may contribute to impaired platelet hemostatic functions. Increased P-selectin levels together with impaired coagulation dynamics might be responsible for the thrombotic events in PEX disease.

Recognition of pseudoinvasion in colorectal adenoma using spatial glycomics.

Pseudoinvasion (PI) is a benign lesion in which cancer is mimicked in the colon by misplacement of dysplastic glands in the submucosa. Although there are morphological clues, the discrimination of PI from true invasion can be a challenge during pathological evaluation of colon adenomas. Both overdiagnosis and underdiagnosis can result in inadequate clinical decisions. This calls for novel tools to aid in cases where conventional methods do not suffice. We performed mass spectrometry imaging (MSI)-based spatial glycomics analysis on a cohort of formalin-fixed paraffin-embedded tissue (FFPE) material from 16 patients who underwent polypectomy. We used this spatial glycomic data to reconstruct the molecular histology of the tissue section using spatial segmentation based on uniform manifold approximation and projection for dimension reduction (UMAP). We first showed that the spatial glycomic phenotypes of the different morphological entities separated as distinct clusters in colon tissues, we separated true invasion from the other morphological entities. Then, we found that the glycomic phenotype in areas with suspected PI in the submucosa was strongly correlating with the corresponding glycomic phenotype of the adenomatous colon epithelium from the same tissue section (Pearson correlation distance average = 0.18). These findings suggest that using spatial glycomics, we can distinguish PI as having a molecular phenotype similar to the corresponding surface epithelium and true invasion as having a different phenotype even when compared to high-grade dysplasia. Therefore, when a novel molecular phenotype is found in the deepest submucosal region, this may be used as an argument in favor of true invasion.

Finite element analysis of the cervical spine: dynamic characteristics and material property sensitivity study

The study aimed to investigate the dynamic characteristics of the cervical spine and determine the effect of the material properties of the cervical spinal components on it. A finite element model of the head-cervical spine was developed based on CT scan data, and the first six orders of modes (e.g. flexion-extension, lateral bending, and vertical, etc.) were verified by experimental and simulation studies. The material sensitivity study was conducted by varying elasticity modulus of cervical hard tissues (cortical bone, cancellous bone, endplates, and posterior elements) and soft tissues (intervertebral disc and ligaments). The results showed that increasing the elastic modulus of ligaments by 4 times increased the natural frequency by 77%, while increasing that of cancellous bone by 4 times only increased the natural frequency by 6%. In the axial mode, the cervical spine had not only axial deformation but also anterior-posterior deformation, with the largest deformation located at the intervertebral disc C6-C7. Decreasing the elastic modulus of a component in soft tissues by 80% increased modal displacement by up to 62%. The material properties of the intervertebral discs and ligaments had opposite effects on the modal displacement and deformation of the cervical spine. Low cervical discs were more susceptible to injury in a vertical vibration environment. Cervical spine dynamics were more sensitive to soft tissue material properties than to hard tissue material properties. Disc degeneration could reduce the range of vibratory motion of the cervical spine, thereby reducing the ability of the cervical spine to cushion head impacts.

Native ChIP: Studying the Genome-Wide Distribution of Histone Modifications in Cells and Tissue.

For the genome-wide mapping of histone modifications, chromatin immunoprecipitation (ChIP) followed by high-throughput sequencing remains the benchmark method. While crosslinked ChIP can be used for all kinds of targets, native ChIP is predominantly used for strong and direct DNA interactors like histones and their modifications. Here we describe a native ChIP protocol that can be used for cells and tissue material.

Biochanin A restored the blood-brain barrier in cerebral ischemia-reperfusion in rats.

Blood-brain barrier is a protective layer that regulates the influx and efflux of biological materials for cerebral tissue. The aim of this study was to investigate the effects of Biochanin A on cerebral histopathology and blood-brain barrier immunohistochemically. A total of 24 rats were assigned to three groups: sham, ischemia-reperfusion, and ischemia-reperfusion+Biochanin A. Ischemia-reperfusion was performed by occluding the left carotid artery for 2/24 h. Notably, 20 mg/kg Biochanin A was administered to rats for 7 days after ischemia-reperfusion. Blood was collected for malondialdehyde and total oxidant/antioxidant status analysis. Cerebral tissues were processed for histopathology and further for immunohistochemical analysis. Malondialdehyde content with total oxidant status value was significantly increased and total antioxidant status values were significantly decreased in the ischemia-reperfusion group compared with the sham group. Biochanin A treatment significantly improved scores in the ischemia-reperfusion+Biochanin A group. The normal histological appearance was recorded in the cerebral sections of the sham group. Degenerated neurons and vascular structures with disrupted integrity of the cerebral cortex were observed after ischemia-reperfusion. Biochanin A alleviated the histopathology in the cerebrum in the ischemia-reperfusion+Biochanin A group. Ischemia-reperfusion injury decreased the expression of blood-brain barrier in the ischemia-reperfusion group compared to the sham group. Administration of Biochanin A upregulated the blood-brain barrier immunoreactivity in the cerebrum by restoring blood-brain barrier. Cerebral ischemia-reperfusion caused an increase in oxidative stress and pathological lesions in the cerebrum. Biochanin A treatment restored the adverse effects of ischemia-reperfusion injury by restoring blood-brain barrier.

GENERAL REQUIREMENTS FOR THE ORGANIZATION OF MEALS FOR CHILDREN AND ADOLESCENTS IN RESTAURANTS

The article is devoted to the consideration of the organization of food for children and adolescents in restaurants. General requirements for the organization of nutrition for children and adolescents have been established, that the organization of nutrition for children and adolescents involves rational nutrition, a variety of dishes, taking into account dietary needs and restrictions, as well as creating comfortable conditions for their reception. Maintaining these requirements contributes to the formation of healthy eating habits and ensures the normal growth and development of children and adolescents. The peculiarities of children’s nutrition at different age periods are given, which indicate the need to adapt the diet and food products to the agerelated needs and capabilities of the child’s body, their eating habits, the ability to digest various products, as well as the specifics of growth and development. The relevance of the topic of nutrition among children and adolescents in modern conditions has been studied. The main factors affecting the nutritional disorders of children older than 1-2 years and adolescents of older age groups are considered. Recommendations were provided on the distribution of calories per day for older children and adolescents with 4 meals a day. Features of nutrition of children and adolescents in different age periods and daily physiological norms of nutrition for children of different ages are given. It has been established that in order to ensure healthy nutrition for children and adolescents, special attention should be paid to the composition of food, in particular to the presence of essential amino acids, which are the main building material for new cells and tissues. Recommendations are provided that are important for ensuring proper physical and mental development, health and well-being of this population category. In addition, it is important to teach children and adolescents the basics of healthy eating. Understanding the importance of a balanced diet and a healthy lifestyle can contribute to the formation of good habits that will be beneficial for their future. The practical significance of the obtained results lies in the opportunity to provide and help restaurants serving the younger generation and improve their conditions.

Stable Isotope Analysis of Antipatharian Diets from the Northwestern Gulf of Mexico

Antipatharians, or black corals, form a key component of the benthic fauna found throughout the Gulf of Mexico (GOM). In the northwestern GOM, they are a common member of the communities found on the natural relic coral—algal banks known as the South Texas Banks as well as on artificial reefs. They are known to provide important habitat for many ecologically and economically important species in the area but are relatively understudied. Here we present a study on their trophic ecology using stable isotope analysis of carbon and nitrogen from 2 species, Antipathes atlantica and Stichopathes luetkeni from a mesophotic artificial reef in close proximity to the South Texas Banks. We observed that a large proportion of the 2 coral’s diets was composed of detrital matter, likely driven by the continuous disturbance of the benthos by high velocity benthic currents common to the region that support a persistent nepheloid layer below 30 m. Both species also show a reliance on different members of the planktonic community, with A. atlantica consuming more micro and mesozooplankton compared to S. luetkeni. Comparative analysis between soft tissue and skeletal material also indicates that A. atlantica may change its diet on a seasonal basis, while S. luetkeni appears to rely on detrital matter consistently. This study represents the first assessment of the diets of these organisms and provides valuable insight on the trophic ecology of 2 common antipatharian corals in the GOM on natural and artificial reef ecosystems.

Tumor mineralization-based cancer diagnosis and therapy

Biomineralization is a phenomenon that involves the deposition of inorganic ions onto organic substrates, resulting in the formation of hard tissue materials. Tumor mineralization, on the other hand, encompasses two key aspects: tumor calcification and tumor iron mineralization. The occurrence of spontaneous tumor calcification and regional lymph node calcification in colorectal cancer, lung cancer, and glioblastoma has been established as a favorable prognostic factor in clinical settings. Building upon this understanding, we propose the concept and advance the development of a compound that artificially induces bionic mineralization around the surface of cancer cells. This process has demonstrated exceptional efficacy in inhibiting the growth and metastasis of cervical, breast, and lung tumors. Moreover, it has exhibited outstanding performance in the early-stage diagnosis of cancer. Consequently, we anticipate that this concept holds significant potential for cancer-targeted mineralization therapy and diagnosis, offering a novel avenue for the development of anticancer drugs.

Three-dimensional dynamic homogenous modeling: The biomechanical influences of leg tissue stiffness on pressure performance of compression biomedical therapeutic textiles.

Patient compliance and therapeutic precision of compression textiles (CTs) are frequently limited by the inaccurate pressure distributions along biological bodies in physical-based compression therapy. Therefore, the biomechanical influences of physiological tissue material characteristics of lower extremities on compression generations of CTs need to be explored systematically to improve pressure management efficacy. In this study, we developed three-dimensional (3D) homogenous finite element (FE) CT-leg systems to qualitatively compare the pressure diversities along lower limbs with different biomaterial tissue properties under each external compression level. Simultaneously, through the obtained leg circumferential displacement, a contact analysis model was applied to quantitatively explore the impact mechanisms of soft leg indentations on the pressure performance of CTs. Based on the experimental validation study, the proposed FE systems could be efficiently utilized for compression performance prediction (error ratio: 7.45%). Through the biomechanical simulation and theoretical calculations, the tissue stiffness characteristics of applied bodies showed significant correlations (p < 0.05) with the body circumferential displacements but no correlations (p > 0.05) with pressure delivery differences of CTs. This study facilitates the pressure fit design principle and leg mannequin material selection guidance for the development and experimental assessment of CTs. It also provides effective simulation methods for pressure prediction and property parametric optimization of compression materials.

Development and validation of the low-cost pregnant female physical phantom for fetal dosimetry in MV photon radiotherapy.

Monte Carlo (MC) simulations or measurements in anthropomorphic phantoms are recommended for estimating fetal dose in pregnant patients in radiotherapy. Among the many existing phantoms, there is no commercially available physical phantom representing the entire pregnant woman. In this study, the development of a low-cost, physical pregnant female phantom was demonstrated using commercially available materials. This phantom is based on the previously published computational phantom. Three tissue substitution materials (soft tissue, lung and bone tissue substitution) were developed. To verify Tena's substitution tissue materials, their radiation properties were assessed and compared to ICRP and ICRU materials using MC simulations in MV radiotherapy beams. Validation of the physical phantom was performed by comparing fetal doses obtained by measurements in the phantom with fetal doses obtained by MC simulations in computational phantom, during an MV photon breast radiotherapy treatment. Materials used for building Tena phantom are matched to ICRU materials using physical density, radiation absorption properties and effective atomic number. MC simulations showed that percentage depth doses of Tena and ICRU material comply within 5% for soft and lung tissue, up to 25cm depth. In the bone tissue, the discrepancy is higher, but again within 5% up to the depth of 5cm. When the phantom was used for fetal dose measurements in MV photon breast radiotherapy, measured fetal doses complied with fetal doses calculated using MC simulation within 15%. Physical anthropomorphic phantom of pregnant patient can be manufactured using commercial materials and with low expenses. The files needed for 3D printing are now freely available. This enables further studies and comparison of numerical and physical experiments in diagnostic radiology or radiotherapy.

Local Defense Factors in Cleft-Affected Palate in Children before and during Milk Dentition Age: A Pilot Study.

One of the most frequent congenital orofacial defects is the cleft lip and palate. Local tissue defense factors are known to be important in immune response and inflammatory and healing processes in the cleft tissue; however, they have only been researched in older children during mixed dentition. Thus, the aim of this study is to assess the distribution of LL-37, CD-163, IL-10, HBD-2, HBD-3, and HBD-4 in children before and during milk dentition. The unique and rare material of palate tissue was obtained from 13 patients during veloplastic surgeries during the time span of 20 years. Immunohistochemistry, light microscopy, semi-quantitative evaluation, and non-parametric statistical analysis were used. A significant decrease in HBD-3 and HBD-4 in the connective tissue was found, as well as several mutual statistically significant and strong correlations between HBD-2, HBD-3, HBD-4, and LL-37. Deficiency of HBD-3 and HBD-4 suggests promotion of chronic inflammation. The scarcity of HBD-4 could be connected to the different signaling pathways of dental pulp cells. Mutual correlations imply changes in the epithelial barrier, amplified healing efficiency, and increased antibacterial line of defense. Deprivation of changes in IL-10 quantity points to possible suppression of the factor. The presence of similar CD-163 immunoreactive substances produced by M2 macrophages was also observed.

Highly Reinforced Acrylic Resins for Hard Tissue Engineering and Their Suitability to Be Additively Manufactured through Nozzle-Based Photo-Printing.

Mineralized connective tissues represent the hardest materials of human tissues, and polymer based composite materials are widely used to restore damaged tissues. In particular, light activated resins and composites are generally considered as the most popular choice in the restorative dental practice. The first purpose of this study is to investigate novel highly reinforced light activated particulate dental composites. An innovative additive manufacturing technique, based on the extrusion of particle reinforced photo-polymers, has been recently developed for processing composites with a filler fraction (w/w) only up to 10%. The second purpose of this study is to explore the feasibility of 3D printing highly reinforced composites. A variety of composites based on 2,2-bis(acryloyloxymethyl)butyl acrylate and trimethylolpropane triacrylate reinforced with silica, titanium dioxide, and zirconia nanoparticles were designed and investigated through compression tests. The composite showing the highest mechanical properties was processed through the 3D bioplotter AK12 equipped with the Enfis Uno Air LED Engine. The composite showing the highest stiffness and strength was successfully processed through 3D printing, and a four-layer composite scaffold was realized. Mechanical properties of particulate composites can be tailored by modifying the type and amount of the filler fraction. It is possible to process highly reinforced photopolymerizable composite materials using additive manufacturing technologies consisting of 3D fiber deposition through extrusion in conjunction with photo-polymerization.

Analysis of transcriptome differences between subcutaneous and intramuscular adipose tissue of Ningxiang pigs.

To compare and analyze the molecular mechanisms of adipose deposition in subcutaneous fat (SAF)and intramuscular fat (IMF) tissues in Ningxiang pigs, differential gene expression profiles in SAF and IMF tissues of Ningxiang pigs were identified and analysed using RNA-seq technology. Six healthy 250-day-old male Ningxiang pigs with similar body weights (approximately 85 kg) of intraspecific individuals were selected as experimental material and samples of SAF and IMF tissues were collected. Differential genes associated with fat deposition and lipid metabolism were obtained by sequencing two adipose tissue transcriptomes and performing GO (Gene Ontology) functional annotation and KEGG (Kyoto Encyclopedia of Genes and Genomes) pathway enrichment analysis. To verify the reliability of the sequencing results, six differential genes were randomly selected to validate using qRT-PCR. The results showed that we identified 2406 DEGs, with 1422 up-regulated and 984 down-regulated genes in two tissues. GO functional annotation analysis revealed that the differentially expressed genes were mainly involved in lipid metabolism related pathways, such as steroid biosynthesis, unsaturated fatty acid biosynthesis, glycerophospholipid metabolism and autophagy pathway. KEGG pathway enrichment showed that the differentially expressed genes were mainly enriched in the biological processes related to lipid binding, fatty acid metabolism, glycol ester metabolism, lipid biosynthesis and other biological processes related to lipid metabolism. Genes related to lipid metabolism, such as TCAP, NR4A1, ACACA, LPL, ELOVL6, DGAT1, PRKAA1, ATG101, TP53INP2, FDFT1, ACOX1 and SCD were identified by bioinformatic analyses and verified by qRT-PCR. Our results indicated that these genes may play important roles in the regulation of fat deposition and metabolism in the SAF and IMF tissue, providing the further mechanistic investigation of fat deposition in Ningxiang pigs.

Development and Validation of a Method for Hydrolysis and Analysis of Amino Acids in Ruminant Feeds, Tissue, and Milk Using Isotope Dilution Z-HILIC Coupled with Electrospray Ionization Triple Quadrupole LC-MS/MS.

Current analytical methods for amino acid (AA) analysis in ruminant nutrition are time-consuming and expensive. This study aimed to develop a method for AA analysis that is faster, more efficient, rugged, and accessible. Four representative matrixes were selected for method development and validation: milk, tissue, feed, and soy flour standard reference material from National Institute of Standards and Technology. Acid and alkaline hydrolysis were used to analyze 18 AA. Separation of AA was performed using a Z-HILIC column in an 18-min run coupled to a triple quadrupole LC/MS system in positive and negative electrospray ionization for identification and quantitation. The method was evaluated for recovery, precision, calibration curve linearity, and limits of detection (LODs) and limits of quantitation (LOQs) and applied to other feed samples. Good quantitation results were achieved for all AA, with coefficients of determination (R2) over 0.995; LODs at 0.2-28.2 and LOQs at 0.7-94.1 ng/mL; intraday and interday precision <14.9% relative standard deviation; blank recovery between 75.6 and 116.2%; and sample recovery between 75.6 and 118.0%. Overall, AA concentrations were similar to literature values, and there was a tendency for higher N recovery as AA. In conclusion, an efficient and robust method was validated to routinely analyze AA for appropriate characterization in diet formulation for dairy cattle.

The Role of Pentraxin 3 in Gastrointestinal Cancers.

Gastrointestinal cancers have become a huge problem worldwide as the number of new cases continues to increase. Due to the growing need to explore new biomarkers and therapeutic targets for the detection and treatment of cancerous lesions, we sought to elucidate the role of Pentraxin-3 in the progression of cancerous lesions, as it is involved in the process of angiogenesis and inflammation. Statistically significant changes in the concentration of this parameter have emerged in many gastrointestinal cancer patients. Moreover, it is related to the advancement of cancer, as well as processes leading to the development of those changes. In the case of studies concerning tissue material, both increased and decreased tissue expression of the tested parameter were observed and were dependent on the type of cancer. In the case of cell lines, both human and animal, a significant increase in Pentraxin 3 gene expression was observed, which confirmed the changes observed at the protein level. In conclusion, it can be assumed that PTX3, both at the level of gene expression and protein concentrations, is highly useful in the detection of gastrointestinal cancers, and its use as a biomarker and/or therapeutic target may be useful in the future.

Adherens junctions as molecular regulators of emergent tissue mechanics.

Tissue and organ development during embryogenesis relies on the collective and coordinated action of many cells. Recent studies have revealed that tissue material properties, including transitions between fluid and solid tissue states, are controlled in space and time to shape embryonic structures and regulate cell behaviours. Although the collective cellular flows that sculpt tissues are guided by tissue-level physical changes, these ultimately emerge from cellular-level and subcellular-level molecular mechanisms. Adherens junctions are key subcellular structures, built from clusters of classical cadherin receptors. They mediate physical interactions between cells and connect biochemical signalling to the physical characteristics of cell contacts, hence playing a fundamental role in tissue morphogenesis. In this Review, we take advantage of the results of recent, quantitative measurements of tissue mechanics to relate the molecular and cellular characteristics of adherens junctions, including adhesion strength, tension and dynamics, to the emergent physical state of embryonic tissues. We focus on systems in which cell-cell interactions are the primary contributor to morphogenesis, without significant contribution from cell-matrix interactions. We suggest that emergent tissue mechanics is an important direction for future research, bridging cell biology, developmental biology and mechanobiology to provide a holistic understanding of morphogenesis in health and disease.

Biomechanical behavior of deep anterior lamellar keratoplasty: a finite element analysis

Deep Anterior Lamellar Keratoplasty (DALK) is a surgical procedure used to restore sight and manage corneal diseases by replacing cloudy corneal tissue with allogeneic normal corneal tissue or artificial corneal material. However, the limited availability and mechanical defects of artificial corneal materials pose challenges in DALK. To predicting postoperative mechanical behavior of Deep Anterior Lamellar Keratoplasty (DALK), a three-dimensional finite element model of the postoperative DALK cornea with suture holes was developed. The postoperative corneal displacement and von Mises (VM) stress changes were also simulated under varying depths of cut (DOC: 0.16-0.26 μm), intraocular pressure (IOP: 12, 15, 18 mmHg), and central corneal thickness (CCT: 420-620 μm). The model indicated that higher IOP and CCT were associated with improved postoperative corneal stability. The postoperative corneal displacement increased from the edge to the center, while the maximum VM stress value occurs at the corneal suture hole. Corneal displacement and VM stress decrease with increasing CCT and decreasing IOP. DOC has a slight effect on corneal displacement and VM stress, with an overall positive relationship. The model has potential application in the preoperative assessment of risk in keratoplasty.

Elasticity and Viscoelasticity Imaging Based on Small Particles Exposed to External Forces

Particle-mediated elasticity/viscoelasticity imaging has the potential to expand the elasticity imaging field, as it can provide accurate and local tissue elastic properties as well as density and viscosity. Here, we investigated elasticity imaging based on small particles located within the tissue and at the tissue interface exposed to static/dynamic external loads. First, we discuss elasticity/viscoelasticity imaging methods based on the use of particles (bubbles and rigid spheres) placed within the tissue. Elasticity/viscoelasticity imaging techniques based on the use of particles (bubbles, rigid, and soft spheres) located at the tissue interface are then presented. Based on new advances, we updated some of the models for the responses of the particles placed within the tissue and at the tissue interface available in the literature. Finally, we compared the mathematical models for the particles located within the tissue and at the tissue interface and evaluated the elasticity/viscoelasticity imaging methods based on the use of small particles. This review summarized the methods for measuring the elasticity and viscosity of material using particles exposed to external forces. Remote viscoelasticity imaging can be used to improve material characterization in both medical and industrial applications and will have a direct impact on our understanding of tissue properties or material defects.

Ultrasound examination of various dental materials and foreign bodies

Purpose To provide information on the sonographic properties of different foreign bodies and dental materials to help with diagnosis. Materials &amp;amp; Methods The investigation contained 10 various dental materials and foreign bodies that were consisting of composite, glass ionomer cement, gutta percha, suture, wooden, stone, canal file, acrylic, alginate, and silicone impression material. The objects were embedded to chicken meat and imaged using ultrasonography (USG). Their visibility and posterior acoustic behaviors were evaluated by both hockey and linear transducers. The actual sizes of this objects and measured dimensions by transducers were compared. Results Only gutta percha could not be distinguished in chicken meat. No difference was observed between the measurements made with the hockey and linear transducers and the actual size. Conclusion USG is a useful method for detecting and measuring foreign bodies and dental materials in soft tissues.

Mechanical testing and comparison of porcine tissue, silicones and 3D-printed materials for cardiovascular phantoms.

Background: Cardiovascular phantoms for patient education, pre-operative planning, surgical training, haemodynamic simulation, and device testing may help improve patient care. However, currently used materials may have different mechanical properties compared to biological tissue. Methods/Aim: The aim of this study was to investigate the mechanical properties of 3D-printing and silicone materials in comparison to biological cardiovascular tissues. Uniaxial cyclic tension testing was performed using dumbbell samples from porcine tissue (aorta, pulmonary artery, right and left ventricle). Flexible testing materials included 15 silicone (mixtures) and three 3D-printing materials. The modulus of elasticity was calculated for different deformation ranges. Results: The modulus of elasticity (0%-60%) for the aorta ranged from 0.16 to 0.18N/mm2, for the pulmonary artery from 0.07 to 0.09N/mm2, and for the right ventricle as well as the left ventricle short-axis from 0.1 to 0.16N/mm2. For silicones the range of modulus of elasticity was 0.02-1.16N/mm2, and for the 3D-printed materials from 0.85 to 1.02N/mm2. The stress-strain curves of all tissues showed a non-linear behaviour in the cyclic tensile testing, with a distinct toe region, followed by exponential strain hardening behaviour towards the peak elongation. The vessel samples showed a more linear behaviour comparted to myocardial samples. The silicones and 3D printing materials exhibited near-linearity at higher strain ranges, with a decrease in stiffness following the initial deformation. All samples showed a deviation between the loading and unloading curves (hysteresis), and a reduction in peak force over the first few cycles (adaptation effect) at constant deformation. Conclusion: The modulus of elasticity of silicone mixtures is more in agreement to porcine cardiovascular tissues than 3D-printed materials. All synthetic materials showed an almost linear behaviour in the mechanical testing compared to the non-linear behaviour of the biological tissues, probably due to fibre recruitment mechanism in the latter.