Tissue Engineering Chamber Research Articles

Seeding of Pancreatic Islets into Prevascularized Tissue Engineering Chambers

Transplantation of islets into the portal vein of diabetic patients has emerged as a promising procedure for the treatment of type 1 diabetes. However, shortages of donors and adverse effects leading to graft impairment and/or rejection have prevented this procedure from achieving widespread clinical application. The aim of this study was to develop a method that could support the survival and function of transplanted islets using a prevascularized tissue engineering chamber. Islets were transplanted into tissue engineering chambers established on the epigastric pedicle in the groin of diabetic mice. Islets were transplanted at the time of chamber implantation or with 21 days prevascularization of the chamber. Transplantation of islets into prevascularized chambers into diabetic RIP-K(b) mice resulted in a significant reduction in blood glucose levels that became evident in the third week and improved glycemic control as measured by a glucose tolerance test. This study highlights that islet survival and function are potentiated by allowing a period of prevascularization within tissue engineering chambers before islet transplantation. This novel prevascularized chamber may be an improved method of islet transplantation. It can be easily accessed for islet seeding, easily retrieved, and transplanted to alternative anatomical sites by microvascular methods.

Endothelial Precursor Cells Home to a Vascularized Tissue Engineering Chamber by Application of the Angiogenic Chemokine CXCL12

Tissue engineering of vascularized constructs has great utility in reconstructive surgery. While we have been successful in generating vascularized granulation-like tissue and adipose tissue in an in vivo tissue engineering chamber, production of other differentiated tissues in a stable construct remains a challenge. One approach is to utilize potent differentiation factors, which can influence the base tissue. Endothelial precursor cells (EPCs) have the ability to both carry differentiation factors and home to developing vasculature. In this study, proof-of-principle experiments demonstrate that such cells can be recruited from the circulation into an in vivo tissue engineering chamber. CXC chemokine ligand 12 (CXCL12)/stromal cell-derived factor 1 was infused into the chamber through Alzet osmotic pumps and chamber cannulation between days 0 and 7, and facilitated recruitment of systemically inoculated exogenous human EPCs injected on day 6. CXCL12 infusion resulted in an eightfold increase in EPC recruitment, 2 (p = 0.03) and 7 days postinfusion (p = 0.008). Delivery of chemotactic/proliferation and/or differentiation factors and appropriately timed introduction of effective cells may allow us to better exploit the regenerative potential of the established chamber construct.

Neovascularization in an arterio‐venous loop‐containing tissue engineering chamber: role of NADPH oxidase

Using an in vivo arterio-venous loop-containing tissue-engineering chamber, we have created a variety of vascularized tissue blocks, including functional myocardium. The viability of the transplanted cells is limited by the rate of neovascularization in the chamber. A Nox2-containing nicotinamide adenine dinucleotide phosphate (NADPH) oxidase is thought to have a critical role in ischaemic angiogenesis. In this study we investigated whether NADPH oxidase is involved in the neovascularization process in the tissue-engineering chamber. New blood vessels originating from the venous and the arterial ends of the loop could be identified after 3 days, and the vessel density (by lectin staining) peaked after 7 days and was maintained for at least 14 days. This was accompanied by granulation tissue formation and concomitant increase in the mRNA level of Nox4 NADPH oxidase. Although the total level of Nox2 mRNA in the chamber tissue decreased from day 3 to day 7, immunohistochemistry identified a strong expression of Nox2 in the endothelial cells of the new vessels. In human microvascular endothelial cells, the NADPH oxidase inhibitor apocynin reduced NADPH oxidase activity and inhibited the angiogenic responses in vitro. Local treatment with the NADPH oxidase inhibitors apocynin or gp91ds-tat peptide significantly suppressed the vessel growth in the chamber. In conclusion, NADPH oxidase-dependent redox signalling is important for neovascularization in this novel tissue-engineering chamber in vivo, and boosting this signalling might be a new approach to extending vascularization and tissue growth.

Role of NADPH oxidase in tissue growth in a tissue engineering chamber in rats

Previously we described a subcutaneous arteriovenous loop (AVL)-based tissue engineering chamber system, which contains an intrinsic circulation circuit created by joining the proximal ends of the femoral artery and vein with a venous graft. We showed that nicotinamide adenine dinucleotide phosphate (NADPH) oxidase was involved in mediating neovascularization inside the chamber. However, the role of NADPH oxidase in tissue formation in the chamber is unknown. In this study, we examined the effects of gp91ds-tat, a peptidyl inhibitor of NADPH oxidase, on the growth of engineered tissue blocks, using a rat chamber model. Chambers containing the AVL were filled with Matrigel mixed with gp91ds-tat (100 microM) or the scrambled control peptide. At 14 days, in control chambers, most of the Matrigel was replaced by granulation tissues; gp91ds-tat treatment significantly reduced the level of reactive oxygen species and retarded the tissue formation process. Although the total number of blood vessels per unit cellularized area was not different between two groups, most vessels in gp91ds-tat-treated tissues had smaller lumens as compared to control. The total area occupied by vessel lumens was much less in gp91ds-tat-treated tissues (10.3 +/- 1.3% in control vs. 1.7 +/- 0.5% in gp91ds-tat group; p < 0.001). In vitro, gp91ds-tat treatment reduced proliferation and migration of cultured microvascular endothelial cells. Our data suggest that inhibition of NADPH oxidase function retards tissue formation in the tissue engineering chamber, which may be related to the malformed new blood vessels in the engineered tissue.

Angiogenic Growth Factor Synergism in a Murine Tissue Engineering Model of Angiogenesis and Adipogenesis

De novo tissue generation stimulated by three angiogenic growth factors administered in a factorial design was studied in an in vivo murine tissue engineering chamber. A silicone chamber was implanted around the epigastric pedicle and filled with Matrigel with 100 ng/ml of recombinant mouse vascular endothelial growth factor-120 (VEGF120), recombinant human basic fibroblastic growth factor (FGF-2), or recombinant rat platelet-derived growth factor-BB (PDGF-BB) added as single, double, or triple combinations. Angiogenesis, supporting tissue ingrowth, and adipogenesis were assessed at 2 and 6 weeks by immunohistochemistry and morphometry. At 2 weeks angiogenesis was synergistically enhanced by VEGF120 + FGF-2 (P = 0.019). FGF-2 (P = 0.008) and PDGF-BB (P = 0.01) significantly increased connective tissue/inflammatory cell infiltrate (macrophages, pericytes, and preadipocytes) in double and triple combinations compared with control. At 6 weeks sequential addition of growth factors increased the percent volume of adipose tissue (P < 0.0005, each main effect), with a synergistic increase in adipose tissue in combination treatments (P < 0.0005). Groups containing 300 ng/ml of single growth factors produced significantly less adipose tissue than the triple growth factor combination (P < 0.0005, VEGF120 and PDGF-BB; P < 0.001, FGF-2). In conclusion, angiogenic growth factor combinations increased early angiogenesis and cell infiltration resulting in synergistically increased adipose tissue growth at 6 weeks. Two way and higher level synergies are likely to be important in therapeutic applications of angiogenic growth factors.

Host Rather than Graft Origin of Matrigel-Induced Adipose Tissue in the Murine Tissue-Engineering Chamber

We have recently shown that Matrigel-filled chambers containing fibroblast growth factor-2 (FGF2) and placed around an epigastric pedicle in the mouse were highly adipogenic. Contact of this construct with pre-existing tissue or a free adipose graft was required. To further investigate the mechanisms underpinning formation of new adipose tissue, we seeded these chambers with human adipose biopsies and human adipose-derived cell populations in severe combined immunodeficient mice and assessed the origin of the resultant adipose tissue after 6 weeks using species-specific probes. The tissues were negative for human-specific vimentin labeling, suggesting that the fat originates from the murine host rather than the human graft. This was supported by the strong presence of mouse-specific Cot-1 deoxyribonucleic acid labeling, and the absence of human Cot-1 labeling in the new fat. Even chambers seeded with FGF2/Matrigel containing cultured human stromal-vascular fraction (SVF) labeled strongly only for human vimentin in cells that did not have a mature adipocyte phenotype; the newly formed fat tissue was negative for human vimentin. These findings indicate that grafts placed in the chamber have an inductive function for neo-adipogenesis, rather than supplying adipocyte-precursor cells to generate the new fat tissue, and preliminary observations implicate the SVF in producing inductive factors. This surprising finding opens the door for refinement of current adipose tissue-engineering approaches.

Cardiac Tissue Engineering in an In Vivo Vascularized Chamber

Cardiac tissue engineering offers the prospect of a novel treatment for acquired or congenital heart defects. We have created vascularized pieces of beating cardiac muscle in the rat that are as thick as the adult rat right ventricle wall. Neonatal rat cardiomyocytes in Matrigel were implanted with an arteriovenous blood vessel loop into a 0.5-mL patented tissue-engineering chamber, located subcutaneously in the groin. Chambers were harvested 1, 4, and 10 weeks after insertion. At 4 and 10 weeks, all constructs that grew in the chambers contracted spontaneously. Immunostaining for alpha-sarcomeric actin, troponin, and desmin showed that differentiated cardiomyocytes present in tissue at all time points formed a network of interconnected cells within a collagenous extracellular matrix. Constructs at 4 and 10 weeks were extensively vascularized. The maximum thickness of cardiac tissue generated was 1983 microm. Cardiomyocytes increased in size from 1 to 10 weeks and were positive for the proliferation markers Ki67 and PCNA. Connexin-43 stain indicated that gap junctions were present between cardiomyocytes at 4 and 10 weeks. Echocardiograms performed between 4 and 10 weeks showed that the tissue construct contracted spontaneously in vivo. In vitro organ bath experiments showed a typical cardiac muscle length-tension relationship, the ability to be paced from electrical field pulses up to 3 Hz, positive chronotropy to norepinephrine, and positive inotropy in response to calcium. In summary, the use of a vascularized tissue-engineering chamber allowed generation of a spontaneously beating 3-dimensional mass of cardiac tissue from neonatal rat cardiomyocytes. Further development of this vascularized model will increase the potential of cardiac tissue engineering to provide suitable replacement tissues for acquired and congenital defects.

Transplantable, Beating Cardiac Tissue Grown and Supported by NADPH Oxidase‐Dependent Angiogenesis in Tissue Engineering Chambers in vivo.

The growth of cardiac tissue in tissue engineering (TE) chambers is limited by the rate of vascularisation of the chamber. We investigated the role of NADPH oxidase in spontaneous vascularisation of the tissue that forms in a novel TE chamber, used to grow cardiac tissue from neonatal rat cardiomyocytes. A short video will be shown of how we construct the chamber, and how in 4 weeks spontaneously beating cardiac tissue grows as a syncytium from implanted myocytes suspended in matrix, with integrated artery and vein attached ready for transplantation. An AV loop is constructed within the TE chamber and implanted under the skin in the groin. New vessels sprout from the loop after 3 days and extend into remote areas producing a vascular network. Vessel density peaked after 7 d, remaining stable beyond 14 d. Superoxide production increased from day 3 to 7 and this was accompanied by increases in Nox4 mRNA in parallel with the number of new vessels. Although the overall expression of Nox2, relative to a housekeeping gene, fell from day 3 to 7, immunohistochemistry identified that in endothelial cells of the new vessels Nox2 was expressed strongly. Importantly, local treatment with the NADPH oxidase inhibitor apocynin blocked vessel growth. Thus NADPH oxidase-dependent redox signaling promotes neovascularization inside the TE chamber. NADPH oxidase has a key role angiogenesis, with significant implications for creating viable engineered tissues, as well as for therapeutic angiogenesis for ischemic diseases such as heart attack, stroke, and limb ischaemia.

Adipose Tissue Engineering Based on the Controlled Release of Fibroblast Growth Factor-2 in a Collagen Matrix

Adipose tissue forms when basement membrane extract (Matrigel) and fibroblast growth factor-2 (FGF-2) are added to our mouse tissue engineering chamber model. A mouse tumor extract, Matrigel is unsuitable for human clinical application, and finding an alternative to Matrigel is essential. In this study we generated adipose tissue in the chamber model without using Matrigel by controlled release of FGF-2 in a type I collagen matrix. FGF-2 was impregnated into biodegradable gelatin microspheres for its slow release. The chambers were filled with these microspheres suspended in 60 microL collagen gel. Injection of collagen containing free FGF-2 or collagen containing gelatin microspheres with buffer alone served as controls. When chambers were harvested 6 weeks after implantation, the volume and weight of the tissue obtained were higher in the group that received collagen and FGF-2 impregnated microspheres than in controls. Histologic analysis of tissue constructs showed the formation of de novo adipose tissue accompanied by angiogenesis. In contrast, control groups did not show extensive adipose tissue formation. In conclusion, this study has shown that de novo formation of adipose tissue can be achieved through controlled release of FGF-2 in collagen type I in the absence of Matrigel.

Adipose Tissue Engineering Based on the Controlled Release of Fibroblast Growth Factor-2 in a Collagen Matrix

Adipose tissue forms when basement membrane extract (Matrigel™) and fibroblast growth factor-2 (FGF-2) are added to our mouse tissue engineering chamber model. A mouse tumor extract, Matrigel is unsuitable for human clinical application, and finding an alternative to Matrigel is essential. In this study we generated adipose tissue in the chamber model without using Matrigel by controlled release of FGF-2 in a type I collagen matrix. FGF-2 was impregnated into biodegradable gelatin microspheres for its slow release. The chambers were filled with these microspheres suspended in 60 μL collagen gel. Injection of collagen containing free FGF-2 or collagen containing gelatin microspheres with buffer alone served as controls. When chambers were harvested 6 weeks after implantation, the volume and weight of the tissue obtained were higher in the group that received collagen and FGF-2 impregnated microspheres than in controls. Histologic analysis of tissue constructs showed the formation of de novo adipose tissue accompanied by angiogenesis. In contrast, control groups did not show extensive adipose tissue formation. In conclusion, this study has shown that de novo formation of adipose tissue can be achieved through controlled release of FGF-2 in collagen type I in the absence of Matrigel.

Matrigel-induced adipogenesis is host rather than graft derived in the murine tissue engineering chamber

Matrigel-induced adipogenesis is host rather than graft derived in the murine tissue engineering chamber

The use of pimonidazole to characterise hypoxia in the internal environment of an in vivo tissue engineering chamber

The distribution of hypoxic cells in an in vivo tissue engineering chamber was investigated up to 28 days post-implantation. Arteriovenous loops were constructed and placed into bi-valved polycarbonate chambers containing 2 x 10(6) rat fibroblasts in basement membrane gel (BM gel). Chambers were inserted subcutaneously in the groin of male rats and harvested at 3 (n = 6), 7 (n = 6), 14 (n = 4) or 28 (n = 4) days. Ninety minutes before harvest, pimonidazole (60 mg/kg) was injected intraperitoneally. Chamber tissue was removed, immersion fixed, paraffin embedded, sectioned and stained immunohistochemically using hypoxyprobe-1 Mab that detects reduced pimonidazole adducts forming in cells, where pO2 < 10 mmHg. At 3 days a fibrin clot/BM gel framework filled the chamber. Seeded fibroblasts had largely died. The majority of 3 day chambers did not demonstrate tissue growth from the AV loop nor was pimonidazole binding present in these chambers. In one chamber in which tissue growth had occurred strong pimonidazole binding was evident within the new tissue. In four out of six 7 day chambers a broader proliferative zone existed extending up to 0.4 mm (approximately) from the AV loop endothelium which demonstrated intense pimonidazole binding. The two remaining 7 day chambers displayed even greater tissue growth (leading edge > 0.7 mm from the AV loop endothelium), but very weak or no pimonidazole binding. At 14 and 28 days the fibrin/BM gel matrix was replaced by mature vascularised connective tissue that did not bind pimonidazole. Employing a tissue engineering chamber, new tissue growth extending up to 0.4 mm from the AV loop endothelium (chambers < or = 7 days) demonstrated intense pimonidazole binding and, therefore, hypoxia. Tissue growth greater than 0.5 mm from the AV loop endothelium (7-28 days chambers) did not exhibit pimonidazole binding due to a significant increase in the number of new blood vessels and was, therefore, adequately oxygenated.