Tissue-engineered Blood Vessels Research Articles

Development of the Nude Rabbit Model.

SummaryLoss-of-function mutations in the forkhead box N1 (FOXN1) gene lead to nude severe combined immunodeficiency, a rare inherited syndrome characterized by athymia, severe T cell immunodeficiency, congenital alopecia, and nail dystrophy. We recently produced FOXN1 mutant nude rabbits (NuRabbits) by using CRISPR-Cas9. Here we report the establishment and maintenance of the NuRabbit colony. NuRabbits, like nude mice, are hairless, lack thymic development, and are immunodeficient. To demonstrate the functional applications of NuRabbits in biomedical research, we show that they can successfully serve as the recipient animals in xenotransplantation experiments using human induced pluripotent stem cells or tissue-engineered blood vessels. Our work presents the NuRabbit as a new member of the immunodeficient animal model family. The relatively large size and long lifespan of NuRabbits offer unique applications in regenerative medicine, cancer research, and the study of a variety of other human conditions, including immunodeficiency.

Development and Application of Endothelial Cells Derived From Pluripotent Stem Cells in Microphysiological Systems Models.

The vascular endothelium is present in all organs and blood vessels, facilitates the exchange of nutrients and waste throughout different organ systems in the body, and sets the tone for healthy vessel function. Mechanosensitive in nature, the endothelium responds to the magnitude and temporal waveform of shear stress in the vessels. Endothelial dysfunction can lead to atherosclerosis and other diseases. Modeling endothelial function and dysfunction in organ systems in vitro, such as the blood–brain barrier and tissue-engineered blood vessels, requires sourcing endothelial cells (ECs) for these biomedical engineering applications. It can be difficult to source primary, easily renewable ECs that possess the function or dysfunction in question. In contrast, human pluripotent stem cells (hPSCs) can be sourced from donors of interest and renewed almost indefinitely. In this review, we highlight how knowledge of vascular EC development in vivo is used to differentiate induced pluripotent stem cells (iPSC) into ECs. We then describe how iPSC-derived ECs are being used currently in in vitro models of organ function and disease and in vivo applications.

Effect of electrospinning parameters on the mechanical and morphological characteristics of small diameter PCL tissue engineered blood vessel scaffolds having distinct micro and nano fibre populations – A DOE approach

Electrospinning is a widely used technique in tissue engineered blood vessel (TEBV) scaffold research. Successful TEBV scaffolds must be produced in a way that balances tissue-like mechanical characteristics with morphologies that promote cellularity by supporting cell attachment whilst also permitting cell infiltration. Electrospun tubular poly (ε-caprolactone) (PCL) scaffolds combining interspersed nano and micro fibre morphologies have shown promise in this regard. A comprehensive design of experiments (DOE) approach examines the effect of production parameters on the mechanical and morphological properties of small diameter PCL vascular scaffolds created using a single-step electrospinning process and comprised of multi-modal fibre populations. Mechanical properties of the vessels are assessed using a modified uniaxial ringlet tensile test method while morphological properties, including mean fibre diameter, degree of fibre alignment and porosity, are also captured.Regression analysis showed that a diverse range of mechanical properties could be achieved through the careful adjustment of processing conditions. Constructs with a broad range of ultimate tensile strengths (~4–10 MPa) and Young's moduli (~1.5–3 MPa) were prepared. The speed of the rotating collector system was found to be a dominant factor influencing both the mechanical and morphological attributes of the fabricated scaffolds. Several other main effects and interactions terms were found to influence the scaffold attributes, including degree of fibre orientation and mean fibre diameter.The potential applicability of particular tubular scaffolds for vascular applications were then evaluated by comparison with literature obtained mechanical property values for human coronary arteries and the great saphenous vein. This study demonstrates an important step towards a readily available and tailorable set of multi-modal PCL scaffold designs for further biological and clinical investigation.

Effect of all-trans retinoic acid and pentagalloyl glucose on smooth muscle cell elastogenesis.

The main objective of tissue engineering is to fabricate a tissue construct that mimics native tissue both biologically and mechanically. A recurring problem for tissue-engineered blood vessels (TEBV) is deficient elastogenesis from seeded smooth muscle cells. Elastin is an integral mechanical component in blood vessels, allowing elastic deformation and retraction in response to the shear and pulsatile forces of the cardiac system. The goal of this research is to assess the effect of the vitamin A derivative all-trans retinoic acid (RA) and polyphenol pentagalloyl glucose (PGG) on the expression of elastin in human aortic smooth muscle cells (hASMC). A polycaprolactone (PCL) and the gelatin polymer composite was electrospun and doped with RA and PGG. The scaffolds were subsequently seeded with hASMCs and incubated for five weeks. The resulting tissue-engineered constructs were evaluated using qPCR and Fastin assay for their elastin expression and deposition. All treatments showed an increased elastin expression compared to the control, with PGG treatments showing a significant increase in gene expression and elastin deposition.

Microfluidic-directed biomimetic Bulbine torta-like microfibers based on inhomogeneous viscosity rope-coil effect.

Helical structures are attracting increasing attention owing to their unique typical physical and chemical properties. However, it remains a challenge to construct atypical helical structures at the microscale. This paper proposes a continuous spinning method with a microfluidic-chip-based spinning device to engineer atypical helical microfibers. The strategy causes polymer fluid to form the biomimetic Bulbine torta (BT)-like shape with the aid of the inhomogeneous viscosity rope-coil effect. In particular, the structure parameter of the BT microfibers could be optimized through the synchronous regulation of the microfluidic flow and reaction kinetics, and the obtained microfibers exhibit ultrahigh strain sensitivity, indicating great promise as exceptional candidates for constructing ideal strain sensors. In addition, single- and double-hollow BT microfibers are also prepared by introducing the core flow channel into the microfluidic chip and demonstrate high structural similarity to irregular blood vessels (e.g. varicose veins), which is promising for the actual application of blood vessel tissue engineering.

Soft Substrate Induces Endothelial Cell Inflammation and Disrupts Endothelium Integrity

Atherosclerosis (AS) is the main cause of death and disability all over the world. A lot of efforts have been devoted to treat AS, among which tissue engineering blood vessel materials, including artificial blood vessels, stents and vascular patches, have brought hope to ameliorate the symptoms in AS patients. However, there remains a large percentage of implantation failure due to the incompatibility of the material with the body. AS is a multi-factor related disease, and chronic inflammation is a major event that involves with its pathogenesis and development. Since previous studies suggested that the stiffness of the blood vessel might affect the inflammatory conditions, in this paper, we investigate the mechanism of how substrate stiffness could affect the inflammation response of the endothelial cells (ECs). Polyacrylamide (PA) based hydrogels at different concentrations were used as the culture substrate for ECs. The mRNA expression level of VCAM-1 and ICAM-1 was determined by qRT-PCR. EC chemotactic effect was evaluated by the number of THP-1 adhered to EC monolayer. The protein levels of IκBα and NF-κB were determined by western blotting analysis. The expression and localization of the major adherens junctions (AJs) proteins, VE-cadherin and β-catenin, were evaluated by western blotting and immunofluorescence staining. Our results showed that ECs cultured on soft substrate (1 kPa) demonstrated more chemotactic effect and the amount of the monocytes adhered to them was higher than that on harder substrate (20 kPa, p < 0.05). Moreover, NF-κB signaling pathway in ECs on 1 kPa substrate was more activated compared to those on 20 kPa substrate, with the IκBα protein expression level in the cytoplasm decreasing and NF-κB translocating more into the nuclear. In addition, the AJs of the endothelial monolayer changed with the substrate stiffness. Compared with ECs on normal substrate (20 kPa), the protein expression level of β-catenin decreased (p < 0.05), and immunofluorescence staining of VE-cadherin and β-catenin showed the AJs between the ECs on soft substrate (1 kPa) were punctuated. Taken together, our results suggested the stiffness of the substrate was important in regulating inflammation of the ECs and the integrity of the cell-cell junction. Therefore, the stiffness of the tissue engineering blood vessel material should be considered as an important criterium to avoid EC inflammation.

Design and characterization of small-diameter tissue-engineered blood vessels constructed by electrospun polyurethane-core and gelatin-shell coaxial fiber

ABSTRACT Substitution or bypass is the most effective treatment for vascular occlusive diseases. The demand for artificial blood vessels has seen an unprecedented rise due to the limited supply of autologous blood vessels. Tissue engineering is the best approach to provide artificial blood vessels. In this study, a new type of small-diameter artificial blood vessel with good mechanical and biological properties was designed by using electrospinning coaxial fibers. Four groups of coaxial fibers vascular membranes having polyurethane/gelatin core-shell structure were cross-linked by the EDC-NHS system and characterized. The core-shell structure of the coaxial vascular fibers was observed by transmission electron microscope. After the crosslinking, the stress and elastic modulus increased and the elongation decreased, burst pressure of 0.11 group reached the maximum (2844.55 ± 272.65 mmHg) after cross-linking, which acted as the experimental group. Masson staining identified blue-stained ring or elliptical gelatin ingredients in the vascular wall. The cell number in the vascular wall of the coaxial group was found in muscle embedding experiment significantly higher than that of the non-coaxial group at all time points(p < 0.001). Our results showed that the coaxial vascular graft with the ratio of 0.2:0.11 had better mechanical properties (burst pressure reached 2844.55 ± 272.65 mmHg); Meanwhile its biological properties were also outstanding, which was beneficial to cell entry and offered good vascular remodeling performance. Polyurethane (PU); Gelatin (Gel); Polycaprolactone (PCL); polylactic acid (PLA);1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC); N-Hydroxy succinimide (NHS); 4-Morpholine-ethane-sulfonic (MES); phosphate buffered saline (PBS); fetal calf serum (FCS); Minimum Essential Medium (MEM); Dimethyl sulfoxide (DMSO); hematoxylin-eosin (HE).

Studying endothelial cell shedding and orientation using adaptive perfusion-culture in a microfluidic vascular chip.

Most tissue-engineered blood vessels are endothelialized by static cultures in vitro. However, it has not been clear whether endothelial cell-shedding and local damage may occur in an endothelial layer formed by static cultures under the effect of blood flow shear postimplantation. In this study, we report a bionic and cost-effective vascular chip platform, and proved that a static culture of endothelialized tissue-engineered blood vessels had the problem of a large number of endothelial cells falling off under the condition imitating the human arterial blood flow, and we addressed this challenge by regulating the flow field in a vascular chip. Electrospun membranes made of highly oriented or randomly distributed poly(ε-caprolactone) fibers were used as the vascular scaffolds, on which endothelial cells proliferated well and eventually formed dense intima layers. We noted that the monolayers gradually adapted to the artery-like microenvironment through the regulation of chip flow field, which also revealed improved cellular orientations. In conclusion, we have proposed a vascular chip with adaptive flow patterns to gradually accommodate the statically cultured vascular endothelia to the shear environment of arterial flow field and enhanced the orientation of the endothelial cells. This strategy may find numerous potential applications such as screening of vascular engineering biomaterials and maturation parameters, studying of vascular biology and pathology, and construction of vessel-on-a-chip models for drug analysis, among others.

Cyborg Vessel

Cyborg Vessel

Preparation of PU/Fibrin Vascular Scaffold with Good Biomechanical Properties and Evaluation of Its Performance in vitro and in vivo.

PurposeThe development of tissue-engineered blood vessels provides a new source of donors for coronary artery bypass grafting and peripheral blood vessel transplantation. Fibrin fiber has good biocompatibility and is an ideal tissue engineering vascular scaffold, but its mechanical property needs improvement.MethodsWe mixed polyurethane (PU) and fibrin to prepare the PU/fibrin vascular scaffolds by using electrospinning technology in order to enhance the mechanical properties of fibrin scaffold. We investigated the morphological, mechanical strength, hydrophilicity, degradation, blood and cell compatibility of PU/fibrin (0:100), PU/fibrin (5:95), PU/fibrin (15:85) and PU/fibrin (25:75) vascular scaffolds. Based on the results in vitro, PU/fibrin (15:85) was selected for transplantation in vivo to repair vascular defects, and the extracellular matrix formation, vascular remodeling, and immune response were evaluated.ResultsThe results indicated that the fiber diameter of the PU/fibrin (15:85) scaffold was about 712nm. With the increase of PU content, the mechanical strength of the composite scaffolds increased, however, the degradation rate decreased gradually. The PU/fibrin scaffold showed good hydrophilicity and hemocompatibility. PU/fibrin (15:85) vascular scaffold could promote the adhesion and proliferation of mesenchymal stromal cells (MSCs). Quantitative RT-PCR experimental results showed that the expression of collagen, survivin and vimentin genes in PU/fibrin (15:85) was higher than that in PU/fibrin (25:75). The results in vivo indicated the mechanical properties and compliance of PU/fibrin grafts could meet clinical requirements and the proportion of thrombosis or occlusion was significantly lower. The graft showed strong vasomotor response, and the smooth muscle cells, endothelial cells, and ECM deposition of the neoartery were comparable to that of native artery after 3 months. At 3 months, the amount of macrophages in PU/fibrin grafts was significantly lower, and the secretion of pro-inflammatory and anti-inflammatory cytokines decreased.ConclusionPU/fibrin (15:85) vascular scaffolds had great potential to be used as small-diameter tissue engineering blood vessels.

Modeling early stage atherosclerosis in a primary human vascular microphysiological system

Novel atherosclerosis models are needed to guide clinical therapy. Here, we report an in vitro model of early atherosclerosis by fabricating and perfusing multi-layer arteriole-scale human tissue-engineered blood vessels (TEBVs) by plastic compression. TEBVs maintain mechanical strength, vasoactivity, and nitric oxide (NO) production for at least 4 weeks. Perfusion of TEBVs at a physiological shear stress with enzyme-modified low-density-lipoprotein (eLDL) with or without TNFα promotes monocyte accumulation, reduces vasoactivity, alters NO production, which leads to endothelial cell activation, monocyte accumulation, foam cell formation and expression of pro-inflammatory cytokines. Removing eLDL leads to recovery of vasoactivity, but not loss of foam cells or recovery of permeability, while pretreatment with lovastatin or the P2Y11 inhibitor NF157 reduces monocyte accumulation and blocks foam cell formation. Perfusion with blood leads to increased monocyte adhesion. This atherosclerosis model can identify the role of drugs on specific vascular functions that cannot be assessed in vivo.

Direct extrusion of individually encapsulated endothelial and smooth muscle cells mimicking blood vessel structures and vascular native cell alignment

Cardiovascular diseases (CVDs) are considered the principal cause of worldwide death, being atherosclerosis the main etiology. Up to now, the predominant treatment for CVDs has been bypass surgery from autologous source. However, due to previous harvest or the type of disease, this is not always an option. For this reason, tissue engineered blood vessels (TEBV) emerged as an alternative graft source for blood vessel replacement. In order to develop a TEBV, it should mimic the architecture of a native blood vessel encapsulating the specific vascular cells in their respective layers with native alignment, and with appropriate mechanical stability. Here, we propose the extrusion of two different cell encapsulating hydrogels, mainly alginate and collagen, and a sacrificial polymer, through a triple coaxial nozzle, which in contact with a crosslinking solution allows the formation of bilayered hollow fibers, mimicking the architecture of native blood vessels. Prior to extrusion, the innermost cell encapsulating hydrogel was loaded with human umbilical vein endothelial cells (HUVECs), whereas the outer hydrogel was loaded with human aortic smooth muscle cells (HASMCs). The size of the TEVB could be controlled by changing the injection speed, presenting homogeneity between the constructs. The obtained structures were robust, allowing its manipulation as well as the perfusion of liquids. Both cell types presented high rates of survival after the extrusion process as well as after 20 d in culture (over 90%). Additionally, a high percentage of HASMC and HUVEC were aligned perpendicular and parallel to the TEBV, respectively, in their own layers, resembling the physiological arrangement found in vivo. Our approach enables the rapid formation of TEBV-like structures presenting high cell viability and allowing proliferation and natural alignment of vascular cells.

Electronic Blood Vessel

Summary Advances in bioelectronics have great potential to address unsolved biomedical problems in the cardiovascular system. By using poly(L-lactide-co-ϵ-caprolactone), which encapsulates liquid metal to make flexible and biodegradable electrical circuitry, we develop an electronic blood vessel that can integrate flexible electronics with three layers of blood-vessel cells, to mimic and go beyond the natural blood vessel. It can improve the endothelialization process through electrical stimulation and can enable controlled gene delivery into specific parts of the blood vessel via electroporation. The electronic blood vessel has excellent biocompatibility in the vascular system and shows great patency 3 months post-implantation in a rabbit model. The electronic blood vessel would be an ideal platform to enable diagnostics and treatments in the cardiovascular system and can greatly empower personalized medicine by creating a direct link of the vascular tissue-machine interface.

Evaluation of remodeling and regeneration of electrospun PCL/fibrin vascular grafts in vivo.

The success of artificial vascular graft in the host to obtain functional tissue regeneration and remodeling is a great challenge in the field of small diameter tissue engineering blood vessels. In our previous work, poly(ε-caprolactone) (PCL)/fibrin vascular grafts were fabricated by electrospinning. It was proved that the PCL/fibrin vascular graft was a suitable small diameter tissue engineering vascular scaffold with good biomechanical properties and cell compatibility. Here we mainly examined the performance of PCL/fibrin vascular graft in vivo. The graft showed randomly arranged nanofiber structure, excellent mechanical strength, higher compliance and degradation properties. At 9 months after implantation in the rat abdominal aorta, the graft induced the regeneration of neoarteries, and promoted ECM deposition and rapid endothelialization. More importantly, the PCL/fibrin vascular graft showed more microvessels density and fewer calcification areas at 3 months, which was beneficial to improve cell infiltration and proliferation. Moreover, the ratio of M2/M1macrophage in PCL/fibrin graft had a higher expression level and the secretion amount of pro-inflammatory cytokines started to increase, and then decreased to similar to the native artery. Thus, the electrospun PCL/fibrin tubular vascular graft had great potential to become a new type of artificial blood vessel scaffold that can be implanted in vivo for long term.

Fabrication of Hollow Structures in Photodegradable Hydrogels Using a Multi-Photon Excitation Process for Blood Vessel Tissue Engineering.

Engineered blood vessels generally recapitulate vascular function in vitro and can be utilized in drug discovery as a novel microphysiological system. Recently, various methods to fabricate vascular models in hydrogels have been reported to study the blood vessel functions in vitro; however, in general, it is difficult to fabricate hollow structures with a designed size and structure with a tens of micrometers scale for blood vessel tissue engineering. This study reports a method to fabricate the hollow structures in photodegradable hydrogels prepared in a microfluidic device. An infrared femtosecond pulsed laser, employed to induce photodegradation via multi-photon excitation, was scanned in the hydrogel in a program-controlled manner for fabricating the designed hollow structures. The photodegradable hydrogel was prepared by a crosslinking reaction between an azide-modified gelatin solution and a dibenzocyclooctyl-terminated photocleavable tetra-arm polyethylene glycol crosslinker solution. After assessing the composition of the photodegradable hydrogel in terms of swelling and cell adhesion, the hydrogel prepared in the microfluidic device was processed by laser scanning to fabricate linear and branched hollow structures present in it. We introduced a microsphere suspension into the fabricated structure in photodegradable hydrogels, and confirmed the fabrication of perfusable hollow structures of designed patterns via the multi-photon excitation process.

Control of vessel diameters mediated by flow-induced outward vascular remodeling in vitro

Vascular networks consist of hierarchical structures of various diameters and are necessary for efficient blood distribution. Recent advances in vascular tissue engineering and bioprinting have allowed us to construct large vessels, such as arteries, small vessels, such as capillaries and microvessels, and intermediate-scale vessels, such as arterioles, individually. However, little is known about the control of vessel diameters between small vessels and intermediate-scale vessels. Here, we focus on vascular remodeling, which creates lasting structural changes in the vessel wall in response to hemodynamic stimuli, to regulate vessel diameters in vitro. The purpose of this study is to control the vessel diameter at an intermediate scale by inducing outward remodeling of microvessels in vitro. Human umbilical vein endothelial cells and mesenchymal stem cells were cocultured in a microfluidic device to construct microvessels, which were then perfused with a culture medium to induce outward vascular remodeling. We successfully constructed vessels with diameters of 40–150 μm in perfusion culture, whereas vessels with diameters of <20 μm were maintained in static culture. We also revealed that the in vitro vascular remodeling was mediated by NO pathways and MMP-9. These findings provide insight into the regulation of diameters of tissue-engineered blood vessels. This is an important step toward the construction of hierarchical vascular networks within biofabricated three-dimensional systems.

Human hair follicle-derived mesenchymal stem cells: Isolation, expansion, and differentiation.

Hair follicles are easily accessible skin appendages that protect against cold and potential injuries. Hair follicles contain various pools of stem cells, such as epithelial, melanocyte, and mesenchymal stem cells (MSCs) that continuously self-renew, differentiate, regulate hair growth, and maintain skin homeostasis. Recently, MSCs derived from the dermal papilla or dermal sheath of the human hair follicle have received attention because of their accessibility and broad differentiation potential. In this review, we describe the applications of human hair follicle-derived MSCs (hHF-MSCs) in tissue engineering and regenerative medicine. We have described protocols for isolating hHF-MSCs from human hair follicles and their culture condition in detail. We also summarize strategies for maintaining hHF-MSCs in a highly proliferative but undifferentiated state after repeated in vitro passages, including supplementation of growth factors, 3D suspension culture technology, and 3D aggregates of MSCs. In addition, we report the potential of hHF-MSCs in obtaining induced smooth muscle cells and tissue-engineered blood vessels, regenerated hair follicles, induced red blood cells, and induced pluripotent stem cells. In summary, the abundance, convenient accessibility, and broad differentiation potential make hHF-MSCs an ideal seed cell source of regenerative medical and cell therapy.

Improvement of Endothelial Cell Performance in an Optimized Electrospun Pre-polyglycerol Sebacate-Poly Lactic Acid Scaffold for Reconstruction of Intima in Coronary Arteries

A most important parameter in tissue engineering of blood vessels is the restoration of the endothelium in small-diameter vascular grafts. Not only the mechanical properties of the inner layer of the synthetic graft but also its physical and chemical properties play important roles in both the response of the endothelial cells and the successful reconstruction of the lumen layer. This study was conducted to develop an optimized scaffold of pre-polyglycerol sebacate-poly lactic acid (pre-PGS-PLLA) polymeric blend and to determine the relevant electrospinning parameters that guarantee the required tensile strength, failure strain, and Young’s modulus of the graft. A second aspect of the study involved evaluation of the suture strength, burst strength, water contact angle, degradation rate, and the response of Human Umbilical Vein Endothelial Cells to the fabricated scaffold. The pre-PGS-PLLA blend showed a tensile strength of 0.420 ± 0.23 MPa, a Young’s modulus of 2.05 ± 0.27 MPa, a suture strength with a failure strain of 67.6 ± 10.97%, and a burst strength of 90.2 ± 0.95 kPa, all of which were mechanically consistent with the artery intima characteristics. Moreover, a contact angle of > 10° with water was recorded. The scaffold was found capable of maintaining 40.14% of its initial weight after 60 days while also retaining its structural integrity. Based on the HUVEC cell response examination, the scaffold had no toxicity and the cells showed satisfactory morphology and proliferation. Given the proper imitation of the mechanical properties as well as the survival and proliferation of the endothelial cells, the synthesized scaffold may be recommended for the reconstruction of coronary artery intima and the treatment of vascular tissue disorders.

Application of Oxidative Stress to a Tissue-Engineered Vascular Aging Model Induces Endothelial Cell Senescence and Activation.

Clinical studies have established a connection between oxidative stress, aging, and atherogenesis. These factors contribute to senescence and inflammation in the endothelium and significant reductions in endothelium-dependent vasoreactivity in aged patients. Tissue-engineered blood vessels (TEBVs) recapitulate the structure and function of arteries and arterioles in vitro. We developed a TEBV model for vascular senescence and examined the relative influence of endothelial cell and smooth muscle cell senescence on vasoreactivity. Senescence was induced in 2D endothelial cell cultures and TEBVs by exposure to 100 µM H2O2 for one week to model chronic oxidative stress. H2O2 treatment significantly increased senescence in endothelial cells and mural cells, human neonatal dermal fibroblasts (hNDFs), as measured by increased p21 levels and reduced NOS3 expression. Although H2O2 treatment induced senescence in both the endothelial cells (ECs) and hNDFs, the functional effects on the vasculature were endothelium specific. Expression of the leukocyte adhesion molecule vascular cell adhesion molecule 1 (VCAM-1) was increased in the ECs, and endothelium-dependent vasodilation decreased. Vasoconstriction and endothelium-independent vasodilation were preserved despite mural cell senescence. The results suggest that the functional effects of vascular cell senescence are dominated by the endothelium.

Cellular attachment behavior on biodegradable polymer surface immobilizing endothelial cell-specific peptide

Small-caliber artificial blood vessels with inner diameters of smaller than 4 mm have not been put into practical use because of early thrombus formation and graft occlusion. To realize small-caliber artificial blood vessels with anti-thrombus property and long-term patency, one of the promising approaches is endothelialization of the lumen by tissue engineering approaches. Integrin α4β1 on the endothelial cell membrane is known to act as a receptor for Arg-Glu-Asp-Val (REDV) tetra-peptide, and this peptide can be used as a specific ligand to introduce endothelial cell attachment onto the surfaces of polymer scaffold. In this study, biodegradable polymer surface immobilizing REDV peptide were prepared, and the specific attachment of endothelial cells on it was investigated as a preliminary study for tissue-engineered small-caliber blood vessels in a future application. We synthesized copolymer of ε-caprolactone and depsipeptide having reactive carboxylic acid side-chain groups (PGDCL), and REDV peptide was attached to the copolymer to give PGDCL-REDV. The attachment of human umbilical vein endothelial cells (HUVECs) were investigated for the blend polymer film prepared by mixing PGDCL and PGDCL-REDV. The obtained blend polymer films exhibited sequence- and cell-specific HUVECs attachment through REDV peptide recognition. This technique should be useful not only to obtain artificial blood vessels which induce endothelialization and but also to provide biodegradable scaffolds with specific ligands immobilized surfaces for tissue regeneration.