Small-diameter Tissue-engineered Vascular Grafts Research Articles

Composite Tissue-Engineered Small-Diameter Vascular Grafts Based on Polycaprolactone and Polyurethane with Growth Factors and Atrombogenic Drug Coatings: Surface Ultrastructure, Physical and Mechanical Properties

Composite Tissue-Engineered Small-Diameter Vascular Grafts Based on Polycaprolactone and Polyurethane with Growth Factors and Atrombogenic Drug Coatings: Surface Ultrastructure, Physical and Mechanical Properties

Macromolecular Crowding Enhances Matrix Protein Deposition in Tissue-Engineered Vascular Grafts.

Successful in vitro culture of small-diameter tissue-engineered vascular grafts (TEVGs) requires rapid deposition of biomacromolecules secreted by vascular smooth muscle cells in a polyglycolic acid mesh scaffold's three-dimensional (3D) porous environment. However, common media have lower crowding conditions than in vivo tissue fluids. In addition, during the early stages of construction, most of the biomolecules secreted by the cells into the medium are lost, which negatively affects the TEVG culture process. In this study, we propose the use of macromolecular crowding (MMC) to enhance medium crowding to improve the deposition and self-assembly efficiency of major biomolecules in the early stages of TEVG culture. The addition of carrageenan significantly increased the degree of MMC in the culture medium without affecting cell viability, proliferation, and metabolic activity. Protein analysis demonstrated that the deposition of collagen types I and III and fibronectin increased significantly in the cell layers of two-dimensional and 3D smooth muscle cell cultures after the addition of a MMC agent. Collagen type I in the culture medium decreased significantly compared with that in the medium without a MMC agent. Scanning electron microscopy demonstrated that MMC agents considerably enhanced the formation of matrix protein structures during the early stages of 3D culture. Hence, MMC modifies the crowding degree of the culture medium, resulting in the rapid formation of numerous matrix proteins and fiber structures. Impact Statement Small-diameter tissue-engineered vascular grafts (TEVGs) are one of the most promising means of treating cardiovascular diseases; however, the in vitro construction of TEVGs has some limitations, such as slow deposition of extracellular matrix (ECM), long culture period, and poor mechanical properties. We hypothesized that macromolecular crowding can increase the crowding of the culture medium to construct a more bionic microenvironment, which enhances ECM deposition in the medium to the cell layer and reduces collagen loss, accelerating and enhancing TEVG culture and construction in vitro.

Histologic and genetic features of remodeling of tissue-engineered small-diameter vascular grafts: outcomes of six-month implantation in a sheep model

Surface modification of polymeric scaffolds with drugs to avoid thrombus formation and infection is a promising area in tissue engineering, which also makes it possible to accelerate the remodeling of such scaffolds and improve long-term patency.The objective of this paper is to study the histologic and genetic features of remodeling of tissue-engineered small-diameter vascular grafts (SDVGs) with antithrombogenic drug-coated and reinforced external scaffolds, implanted into a sheep carotid artery.Materials and methods. Poly(ε-caprolactone) (PCL) matrices, ∅4 mm in diameter, were fabricated via electrospinning, followed by creation of a reinforcing spiral PCL scaffold on their outer surface by extrusion. To prevent thrombus formation and infection, the fabricated grafts were modified with iloprost and cationic amphiphile by complexation through polyvinylpyrrolidone (PVP). The work was carried out to evaluate, by infrared spectroscopy, the formation of PVP-based coating, to study the physical and mechanical properties of the grafts in longitudinal and transverse directions, and to implant the vascular grafts (VGs) into a sheep carotid artery. To assess and control the patency of the implanted grafts, Doppler ultrasound was performed at days 1 and 5, then at 1, 3 and 6 months. The explanted samples were studied via histological and immunofluorescent analyses; gene expression profile was evaluated.Results. Ultrasound on days 1 and 5 after implantation showed the patency of vascular grafts to be 100%. At 1 month, the patency decreased to 83.3%; patency was 50% by the end of the implantation period (6 months), without aneurysm formation and detachment of the reinforcing scaffold. Histological and immunofluorescence studies of patent grafts showed the formation of a newly formed three-layer vascular tissue structure on their basis, without signs of inflammation and calcification. However, despite the structural similarity between the newly formed vascular tissue and the native tissue of a sheep carotid artery, analysis of the gene expression profile revealed some differences in terms of genetic profile: CNN and SNA12 expression levels in the neotissue decreased, and those of CTSB, TNFa, and TGFb increased.Conclusion. Modified polymeric vascular scaffolds showed good remodeling of the prosthetic wall, without aneurysm formation. The identified genetic differences between newly formed tissue and native tissue are logical in view of formation on the basis of the artificial polymeric scaffold. Further research on reinforced polymeric scaffolds will be aimed at improving the inner surface in order to improve their thromboresistance.

A small-diameter vascular graft promotes rapid and benign remodeling of the neointima through dual release of nitric oxide and hydrogen sulfide

Coronary artery bypass grafting often requires autologous veins as alternatives. The limited source and problem of over-expansion are major obstacles for vein grafts, which could be solved by small-diameter artificial vascular graft. However, their clinical application is limited by thrombosis and restenosis caused by incomplete endothelialization and abnormal smooth muscle cells (SMCs) proliferation. Nitric oxide (NO) and hydrogen sulfide (H2S) are crucial signaling molecules in the cardiovascular system, known to regulate endothelial cells(ECs) and SMCs proliferation, migration, reduce oxidative stress, and inhibit inflammation to prevent intimal hyperplasia. In this study, we developed a new method to prepare a keratin based H2S donor(KAT) complexed with copper ions and electrospun it with PCL to prepare PCL/KAT-Cu small-diameter tissue-engineered vascular graft, which is capable of dual release of NO and H2S. We investigated the effects of NO and H2S release on human umbilical vein endothelial cells (HUVECs) and human umbilical arterial smooth muscle cells(HUASMCs) proliferation and migration, evaluated the graft's selectivity for HUVECs, and assessed its effects on macrophage phenotypic transitions and its protective effect on HUVECs under reactive oxygen species (ROS) conditions. Additionally, we tested the graft's ability to rapidly endothelialize under shear force using an in vitro 3D-perfusion system. After one month of in situ transplantation in rat abdominal aorta, the PCL/KAT-Cu small-diameter tissue-engineered vascular grafts demonstrated satisfactory intimal remodeling, comparable to natural blood vessels. In conclusion, our study presents a promising new strategy for remodeling small-diameter vascular grafts.

Construction of tissue-engineered vascular grafts with enhanced patency by integrating heparin, cell-adhesive peptide, and carbon monoxide nanogenerators into acellular blood vessels

Small-diameter tissue-engineered vascular grafts (sdTEVGs) have garnered significant attention as a potential treatment modality for vascular bypass grafting and replacement therapy. However, the intimal hyperplasia and thrombosis are two major complications that impair graft patency during transplantation. To address this issue, we fabricated the covalent-organic framework (COF)-based carbon monoxide (CO) nanogenerator-and co-immobilized with LXW-7 peptide and heparin to establish a multifunctional surface on TEVGs constructed from acellular blood vessels for preventing thrombosis and stenosis. The cell-adhesive peptide LXW-7 could capture endothelial-forming cells (EFCs) to promote endothelialization, while the antithrombotic molecule heparin prevented thrombus formation. The reactive oxygen species (ROS)-triggered CO release suppressed the adhesion and activation of macrophages, leading to the reduction of ROS and inflammatory factors. As a result, the endothelial-to-mesenchymal transition (EndMT) triggered by inflammation was restricted, facilitating the maintenance of the homeostasis of the neo-endothelium and preventing pathological remodeling in TEVGs. When transplanted in vivo, these vascular grafts exhibited negligible intimal hyperplasia and remained patent for 3 months. This achievement provided a novel approach for constructing antithrombotic and anti-hyperplastic TEVGs.

Highly compliant biomimetic scaffolds for small diameter tissue-engineered vascular grafts (TEVGs) produced via melt electrowriting (MEW)

Biofabrication approaches toward the development of tissue-engineered vascular grafts (TEVGs) have been widely investigated. However, successful translation has been limited to large diameter applications, with small diameter grafts frequently failing due to poor mechanical performance, in particular mismatched radial compliance. Herein, melt electrowriting (MEW) of poly(ϵ-caprolactone) has enabled the manufacture of highly porous, biocompatible microfibre scaffolds with physiological anisotropic mechanical properties, as substrates for the biofabrication of small diameter TEVGs. Highly reproducible scaffolds with internal diameter of 4.0 mm were designed with 500 and 250 µm pore sizes, demonstrating minimal deviation of less than 4% from the intended architecture, with consistent fibre diameter of 15 ± 2 µm across groups. Scaffolds were designed with straight or sinusoidal circumferential microfibre architecture respectively, to investigate the influence of biomimetic fibre straightening on radial compliance. The results demonstrate that scaffolds with wave-like circumferential microfibre laydown patterns mimicking the architectural arrangement of collagen fibres in arteries, exhibit physiological compliance (12.9 ± 0.6% per 100 mmHg), while equivalent control geometries with straight fibres exhibit significantly reduced compliance (5.5 ± 0.1% per 100 mmHg). Further mechanical characterisation revealed the sinusoidal scaffolds designed with 250 µm pores exhibited physiologically relevant burst pressures of 1078 ± 236 mmHg, compared to 631 ± 105 mmHg for corresponding 500 µm controls. Similar trends were observed for strength and failure, indicating enhanced mechanical performance of scaffolds with reduced pore spacing. Preliminary in vitro culture of human mesenchymal stem cells validated the MEW scaffolds as suitable substrates for cellular growth and proliferation, with high cell viability (>90%) and coverage (>85%), with subsequent seeding of vascular endothelial cells indicating successful attachment and preliminary endothelialisation of tissue-cultured constructs. These findings support further investigation into long-term tissue culture methodologies for enhanced production of vascular extracellular matrix components, toward the development of the next generation of small diameter TEVGs.

Biomimetic Antithrombotic Tissue-Engineered Vascular Grafts for Converting Cholesterol and Free Radicals into Nitric Oxide.

Small-diameter tissue-engineered vascular grafts (sdTEVGs) are essential materials used in bypass or replacement surgery for cardiovascular diseases; however, their application efficacy is limited because of patency rates, especially under hyperlipidemia, which is also clinically observed in patients with cardiovascular diseases. In such cases, improving sdTEVG patency is challenging because cholesterol crystals easily cause thrombosis and impede endothelialization. Here, the development of a biomimetic antithrombotic sdTEVG incorporating cholesterol oxidase and arginine into biomineralized collagen-gold hydrogels on a sdTEVG surface is described. Biomimetic antithrombotic sdTEVGs represent a multifunctional substrate for the green utilization of hazardous substances and can convert cholesterol into hydrogen peroxide, which can react with arginine to generate nitric oxide (NO). NO is a vasodilator that can simulate the antithrombotic action of endothelial cells under hyperlipidemic conditions. In vivo studies show that sdTEVGs can rapidly produce large amounts of NO via a cholesterol catalytic cascade to inhibit platelet aggregation, thereby improving the blood flow velocity and patency rates 60 days after sdTEVG transplantation. A practical and reliable strategy for transforming "harmful" substances into "beneficial" factors at early transplantation stages is presented, which can also promote vascular transplantation in patients with hyperlipidemia.

Tissue-engineered small-diameter vascular grafts containing novel copper-doped bioactive glass biomaterials to promote angiogenic activity and endothelial regeneration.

Small-diameter vascular grafts frequently fail because of obstruction and infection. Despite the wide range of commercially available vascular grafts, the anatomical uniqueness of defect sites demands patient-specific designs. This study aims to increase the success rate of implantation by fabricating bilayer vascular grafts containing bioactive glasses (BGs) and modifying their composition by removing hemostatic ions to make them blood-compatible and to enhance their antibacterial and angiogenesis properties. The porous vascular graft tubes were 3D printed using polycaprolactone, polyglycerol sebacate, and the modified BGs. The polycaprolactone sheath was then wrapped around the 3D-printed layer using the electrospinning technique to prevent blood leakage. The results demonstrated that the incorporation of modified BGs into the polymeric matrix not only improved the mechanical properties of the vascular graft but also significantly enhanced its antibacterial activity against both gram-negative and gram-positive strains. In addition, no hemolysis or platelet activity was detected after incorporating modified BGs into the vascular grafts. Copper-releasing vascular grafts significantly enhanced endothelial cell proliferation, motility, and VEGF secretion. Additionally, In vivo angiogenesis (CD31 immunofluorescent staining) and gene expression experiments showed that copper-releasing vascular grafts considerably promoted the formation of new blood vessels, low-grade inflammation (decreased expression of IL-1β and TNF-α), and high-level angiogenesis (increased expression of angiogenic growth factors including VEGF, PDGF-BB, and HEBGF). These observations indicate that the use of BGs with suitable compositional modifications in vascular grafts may promote the clinical success of patient-specific vascular prostheses by accelerating tissue regeneration without any coagulation problems.

Modulation of Smooth Muscle Cell Phenotype for Translation of Tissue-Engineered Vascular Grafts.

Translation of small-diameter tissue-engineered vascular grafts (TEVGs) for the treatment of coronary artery disease (CAD) remains an unfulfilled promise. This is largely due to the limited integration of TEVGs into the native vascular wall-a process hampered by the insufficient smooth muscle cell (SMC) infiltration and extracellular matrix deposition, and low vasoactivity. These processes can be promoted through the judicious modulation of the SMC toward a synthetic phenotype to promote remodeling and vascular integration; however, the expression of synthetic markers is often accompanied by a decrease in the expression of contractile proteins. Therefore, techniques that can precisely modulate the SMC phenotypical behavior could have the potential to advance the translation of TEVGs. In this review, we describe the phenotypic diversity of SMCs and the different environmental cues that allow the modulation of SMC gene expression. Furthermore, we describe the emerging biomaterial approaches to modulate the SMC phenotype in TEVG design and discuss the limitations of current techniques. In addition, we found that current studies in tissue engineering limit the analysis of the SMC phenotype to a few markers, which are often the characteristic of early differentiation only. This limited scope has reduced the potential of tissue engineering to modulate the SMC toward specific behaviors and applications. Therefore, we recommend using the techniques presented in this review, in addition to modern single-cell proteomics analysis techniques to comprehensively characterize the phenotypic modulation of SMCs. Expanding the holistic potential of SMC modulation presents a great opportunity to advance the translation of living conduits for CAD therapeutics.

Multifunctional nanoparticle-VEGF modification for tissue-engineered vascular graft to promote sustained anti-thrombosis and rapid endothelialization.

Purpose: The absence of a complete endothelial cell layer is a well-recognized reason leading to small-diameter tissue-engineered vascular graft failure. Here we reported a multifunctional system consisting of chitosan (CS), Arg-Glu-Asp-Val (REDV) peptide, heparin, and vascular endothelial growth factor (VEGF) to achieve sustained anti-thrombosis and rapid endothelialization for decellularized and photo-oxidized bovine internal mammary arteries (DP-BIMA). Methods: CS-REDV copolymers were synthesized via a transglutaminase (TGase) catalyzed reaction. CS-REDV-Hep nanoparticles were formed by electrostatic self-assembly and loaded on the DP-BIMA. The quantification of released heparin and vascular endothelial growth factor was detected. Hemolysis rate, platelets adhesion, endothelial cell (EC) adhesion and proliferation, and MTT assay were performed in vitro. The grafts were then tested in a rabbit abdominal aorta interposition model for 3months. The patency rates were calculated and the ECs regeneration was investigated by immunofluorescence staining of CD31, CD144, and eNOS antibodies. Results: The nanoparticle-VEGF system (particle size: 61.8 ± 18.3nm, zeta-potential: +13.2mV, PDI: .108) showed a sustained and controlled release of heparin and VEGF for as long as 1month and exhibited good biocompatibility, a lower affinity for platelets, and a higher affinity for ECs in vitro. The nanoparticle-VEGF immobilized BIMA achieved 100% and 83.3% patency in a rabbit abdominal interposition model during 1 and 3months, respectively, without any thrombogenicity and showed CD31, CD144, eNOS positive cell adhesion as early as 1day. After 3months, CD31, CD144, and eNOS positive cells covered almost the whole luminal surface of the grafts. Conclusion: The results demonstrated that the multifunctional nanoparticle-VEGF system can enhance the anti-thrombosis property and promote rapid endothelialization of small-diameter tissue-engineered vascular grafts. Utilizing nanoparticles to combine different kinds of biomolecules is an appropriate technology to improve the long-term patency of small-diameter tissue-engineered vascular grafts.

Application of decellularized vascular matrix in small-diameter vascular grafts.

Coronary artery bypass grafting (CABG) remains the most common procedure used in cardiovascular surgery for the treatment of severe coronary atherosclerotic heart disease. In coronary artery bypass grafting, small-diameter vascular grafts can potentially replace the vessels of the patient. The complete retention of the extracellular matrix, superior biocompatibility, and non-immunogenicity of the decellularized vascular matrix are unique advantages of small-diameter tissue-engineered vascular grafts. However, after vascular implantation, the decellularized vascular matrix is also subject to thrombosis and neoplastic endothelial hyperplasia, the two major problems that hinder its clinical application. The keys to improving the long-term patency of the decellularized matrix as vascular grafts include facilitating early endothelialization and avoiding intravascular thrombosis. This review article sequentially introduces six aspects of the decellularized vascular matrix as follows: design criteria of vascular grafts, components of the decellularized vascular matrix, the changing sources of the decellularized vascular matrix, the advantages and shortcomings of decellularization technologies, modification methods and the commercialization progress as well as the application prospects in small-diameter vascular grafts.

Controlled and Synchronised Vascular Regeneration upon the Implantation of Iloprost- and Cationic Amphiphilic Drugs-Conjugated Tissue-Engineered Vascular Grafts into the Ovine Carotid Artery: A Proteomics-Empowered Study.

Implementation of small-diameter tissue-engineered vascular grafts (TEVGs) into clinical practice is still delayed due to the frequent complications, including thrombosis, aneurysms, neointimal hyperplasia, calcification, atherosclerosis, and infection. Here, we conjugated a vasodilator/platelet inhibitor, iloprost, and an antimicrobial cationic amphiphilic drug, 1,5-bis-(4-tetradecyl-1,4-diazoniabicyclo [2.2.2]octan-1-yl) pentane tetrabromide, to the luminal surface of electrospun poly(ε-caprolactone) (PCL) TEVGs for preventing thrombosis and infection, additionally enveloped such TEVGs into the PCL sheath to preclude aneurysms, and implanted PCLIlo/CAD TEVGs into the ovine carotid artery (n = 12) for 6 months. The primary patency was 50% (6/12 animals). TEVGs were completely replaced with the vascular tissue, free from aneurysms, calcification, atherosclerosis and infection, completely endothelialised, and had clearly distinguishable medial and adventitial layers. Comparative proteomic profiling of TEVGs and contralateral carotid arteries found that TEVGs lacked contractile vascular smooth muscle cell markers, basement membrane components, and proteins mediating antioxidant defense, concurrently showing the protein signatures of upregulated protein synthesis, folding and assembly, enhanced energy metabolism, and macrophage-driven inflammation. Collectively, these results suggested a synchronised replacement of PCL with a newly formed vascular tissue but insufficient compliance of PCLIlo/CAD TEVGs, demanding their testing in the muscular artery position or stimulation of vascular smooth muscle cell specification after the implantation.

Development of a vascular substitute produced by weaving yarn made from human amniotic membrane

Because synthetic vascular prostheses perform poorly in small-diameter revascularization, biological vascular substitutes are being developed as an alternative. Although their in vivo results are promising, their production involves long, complex, and expensive tissue engineering methods. To overcome these limitations, we propose an innovative approach that combines the human amniotic membrane (HAM), which is a widely available and cost-effective biological raw material, with a rapid and robust textile-inspired assembly strategy. Fetal membranes were collected after cesarean deliveries at term. Once isolated by dissection, HAM sheets were cut into ribbons that could be further processed by twisting into threads. Characterization of the HAM yarns (both ribbons and threads) showed that their physical and mechanical properties could be easily tuned. Since our clinical strategy will be to provide an off-the-shelf allogeneic implant, we studied the effects of decellularization and/or gamma sterilization on the histological, mechanical, and biological properties of HAM ribbons. Gamma irradiation of hydrated HAMs, with or without decellularization, did not interfere with the ability of the matrix to support endothelium formation in vitro. Finally, our HAM-based, woven tissue-engineered vascular grafts (TEVGs) exhibited clinically relevant mechanical properties. Thus, this study demonstrates that human, completely biological, allogeneic, small-diameter TEVGs can be produced from HAM, thereby avoiding costly cell culture and bioreactors.

Tubular TPU/SF nanofibers covered with chitosan-based hydrogels as small-diameter vascular grafts with enhanced mechanical properties

Native grafts such as internal mammary artery and saphenous vein are the main choice for coronary artery bypass graft. However, due to the limitations associated with their availability and rapid failure caused by hyperplasia, small diameter tissue-engineered vascular grafts (TEVGs) with sufficient post-implantation patency are urgently demanded as artificial alternatives. In our previous work, we innovatively fabricated a bilayer vascular graft providing appropriate structural and biological properties using electrospinning and freeze-drying methods. It was proved that the mechanical properties of the proposed graft enhanced in comparison with using either of methods individually. Here, we adopted the same methods and incorporated an anticoagulant internal layer (inner diameter 4 mm), comprised of co-electrospun fibers of silk fibroin (SF) and heparinized thermoplastic polyurethane (TPU), and an external highly porous hydrogel fabricated by freeze-drying method. The electrospun layer exhibited strong mechanical properties including superior elastic modulus (4.92 ± 0.11 MPa), suture retention force (6.73 ± 0.83 N), elongation at break (196 ± 4%), and comparable burst pressure (1140 ± 12 mmHg) while the external hydrogel provided SMCs viability. The heparin was released in a sustain manner over 40 days, and the cytocompatibility and blood compatibility of scaffold were approved using MTT assay and platelet adhesion test. Thus, the proposed graft has a potential to be used as an artificial blood vessel scaffold for later in-vivo transplantation.

The crescendo pulse frequency of shear stress stimulates the endothelialization of bone marrow mesenchymal stem cells on the luminal surface of decellularized scaffold in the bioreactor

ABSTRACT A completely confluent endothelial cell (EC) monolayer is required to maintain proper vascular function in small diameter tissue-engineered vascular graft (TEVG). However, the most effective method for EC attachment to the luminal surface and formation of an entire endothelium layer that works in vitro remains a complicated challenge that requires urgent resolution. Although pulsatile flow has been shown to be better suited for the generation of functional endothelium, the optimal frequency setting is unknown. Several pulsatile flow frequencies were used to implant rat bone mesenchymal stem cells (MSC) into the lumen of decellularized porcine carotid arteries. The endothelium's integrity and cell activity were investigated in order to determine the best pulse frequency settings. The results showed that MSC were maximally preserved and exhibited maximal morphological changes with improved endothelialization performance in response to increased pulse stimulation frequency. Increased pulse frequency stimulation stimulates the expression of mechanoreceptor markers, cytoskeleton reorganization in the direction of blood flow, denser skeletal proteins fibronectin, and stronger intercellular connections when compared to constant pulse frequency stimulation. MSC eventually develops an intact endothelial layer with anti-thrombotic properties on the inner wall of the decellularized tubular lumen. Conclusion: The decellularized vessels retain the three-dimensional structure of the vasculature, have a surface topography suitable for MSC growth, and have good mechanical properties. By increasing the frequency of pulsed stimulation, MSC endothelialize the lumen of the decellularized vasculature. It is expected to have anti-thrombotic and anti-neointimal hyperplasia properties after implantation, ultimately improving the patency of TEVG.

Bioactive coating for tissue-engineered smalldiameter vascular grafts

Objective: to develop a method for modifying composite small-diameter porous tubular biopolymer scaffolds based on bacterial copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and gelatin modified with a double-layered bioactive coating based on heparin (Hp) and platelet lysate (PL) that promote adhesion and proliferation of cell cultures.Materials and methods. Composite porous tubular biopolymer scaffolds with 4 mm internal diameter were made by electrospinning from a 1 : 2 (by volume) mixture of a 10% solution of poly(3-hydroxybutyrateco- 3-hydroxyvalerate) copolymer, commonly known as PHBV, and a 10% solution of gelatin, respectively, in hexafluoro-2-propanol. The structure of the scaffolds was stabilized with glutaraldehyde vapor. The scaffolds were modified with a bioactive Hp + PL-based coating. The surface morphology of the samples was analyzed using scanning electron microscopy. Biological safety of the modified scaffolds in vitro (hemolysis, cytotoxicity) was evaluated based on the GOST ISO 10993 standard. Interaction with cultures of human endothelial cell line (EA. hy926) and human adipose-derived mesenchymal stem cells (hADMSCs) was studied using vital dyes.Results. We developed a method for modifying small-diameter composite porous tubular biopolymer scaffolds obtained by electrospinning from a mixture of PHBV and gelatin modified with double-layered bioactive coating based on covalently immobilized Hp and human PL. The modified scaffold was shown to have no cytotoxicity and hemolytic activity in vitro. It was also demonstrated that the developed coating promotes hADMSC adhesion and proliferation on the external surface and EA.hy926 on the internal surface of the composite porous tubular biopolymer scaffolds in vitro.Conclusion. The developed coating can be used for the formation of in vivo tissueengineered small-diameter vascular grafts.

Fabrication of a Completely Biological and Anisotropic Human Mesenchymal Stem Cell-Based Vascular Graft.

Tissue-engineered small-diameter vascular grafts are required to match mechanical properties as well as cellular and extracellular architecture of native blood vessels. Although various engineering technologies have been developed, the most reliable strategy highlights the needs for incorporating completely biological components and anisotropic cellular and biomolecular organization into the tissue-engineered vascular graft (TEVG). Based on the antithrombogenic, immunoregulatory, and regenerative properties of human mesenchymal stem cells (hMSCs), this chapter provides a step-by-step protocol for generating a completely biological and anisotropic TEVG that comprises of hMSCs and highly aligned extracellular matrix (ECM) nanofibers. The hMSCs were grown on an aligned nanofibrous ECM scaffold derived from an oriented human dermal fibroblast (hDF) sheet and then wrapped around a temporary mandrel to form a tubular assembly, followed by a maturation process in a rotating wall vessel (RWV) bioreactor. The resulting TEVG demonstrates anisotropic structural and mechanical properties similar to that of native blood vessels. A completely biological, anisotropic, and mechanically strong TEVG that incorporates immunoregulatory hMSCs is promising to meet the urgent needs of a surgical intervention for bypass grafting.

Small-Diameter Vessels Reconstruction Using Cell Tissue-Engineering Graft Based on the Polycaprolactone

Polycaprolactone (PCL) is widely applied for the construction of small-diameter tissue-engineered vascular grafts (TEGs) due to its biomechanical properties, slow degradation, and good biocompatibility. In the present study the TEG based on a tubular scaffold seeded with smooth muscle aortic cells (SMCs) in a rat abdominal aorta replacement model was tested. Polyester tubular scaffolds were generated by thermally induced phase separation and seeded with rat SMCs. To track the implanted SMCs in vivo, cells were labeled with superparamagnetic iron oxide nanoparticles (SPIONs). Histological evaluation of the migration of autologous endothelial cells (ECs) and formation of the endothelial lining was performed 4, 8, and 12 weeks after graft interposition. TEG demonstrated a high patency rate without any complications at the end of the 12-week period. The migration of ECs into the lumen of the implanted TEG and formation of the cell monolayer were already present at 4 weeks, as confirmed by histological analysis. The architecture of both neointima and neoadventitia were similar to those of the native vessel. SPION-labeled SMCs were detected throughout the TEG, indicating the role of these cells in the endothelization of scaffolds. The SMC-seeded scaffolds demonstrated improved patency and biointegrative properties when compared to the acellular grafts.

Programmable dual responsive system reconstructing nerve interaction with small-diameter tissue-engineered vascular grafts and inhibiting intimal hyperplasia in diabetes

Small-diameter tissue-engineered vascular grafts (sdTEVGs) with hyperglycemia resistance have not been constructed. The intimal hyperplasia caused by hyperglycemia remains problem to hinder the patency of sdTEVGs. Here, inspired by bionic regulation of nerve on vascular, we found the released neural exosomes could inhibit the abnormal phenotype transformation of vascular smooth muscle cells (VSMCs). The transformation was a prime culprit causing the intimal hyperplasia of sdTEVGs. To address this concern, sdTEVGs were modified with an on-demand programmable dual-responsive system of ultrathin hydrogels. An external primary Reactive Oxygen Species (ROS)-responsive Netrin-1 system was initially triggered by local inflammation to induce nerve remolding of the sdTEVGs overcoming the difficulty of nerve regeneration under hyperglycemia. Then, the internal secondary ATP-responsive DENND1A (guanine nucleotide exchange factor) system was turned on by the neurotransmitter ATP from the immigrated nerve fibers to stimulate effective release of neural exosomes. The results showed nerve fibers grow into the sdTEVGs in diabetic rats 30 days after transplantation. At day 90, the abnormal VSMCs phenotype was not detected in the sdTEVGs, which maintained long-time patency without intima hyperplasia. Our study provides new insights to construct vascular grafts resisting hyperglycemia damage.

Sonication-Assisted Method for Decellularization of Human Umbilical Artery for Small-Caliber Vascular Tissue Engineering.

Decellularized vascular grafts are useful for the construction of biological small-diameter tissue-engineered vascular grafts (≤6 mm). Traditional chemical decellularization requires a long treatment time, which may damage the structure and alter the mechanical properties. Decellularization using sonication is expected to solve this problem. The aim of this study was to develop an effective decellularization method using ultrasound followed by washing. Different power values of sonication at 40 kHz were tested for 2, 4, and 8 h followed by a washing procedure. The efficacy of sonication of decellularized human umbilical artery (sDHUA) was evaluated via DNA content, histological staining, mechanical properties, and biocompatibility. The sDHUAs were further implanted into rats for up to 90 days and magnetic resonance angiography (MRA) was performed for the implanted grafts. The results demonstrated that treatment of human umbilical artery (HUA) by sonication at ultrasonic power of 204 W for 4 h followed by washing for 24 h in 2% SDS buffer could eliminate more than 90% of cells and retain similar mechanical properties of the HUA. Recellularization was assessed by scanning electron microscopy (SEM), which indicated that sDHUA provided niches for human umbilical vein endothelial cells (HUVECs) to reside, indicating in vitro cytocompatibility. Further implantation tests also indicated the fitness of the sonication-treated HUA as a scaffold for small-caliber tissue engineering vascular grafts.