Tissue-engineered Products Research Articles

Issues with Tissues: Trends in Tissue-Engineered Products in Clinical Trials in the European Union.

Tissue-engineered products (TEPs) consist of engineered cells or tissues produced to regenerate, repair, or replace a dysfunctional, diseased, or absent human tissue. TEPs make up <5% of all advanced therapeutic medicinal products (ATMPs) in clinical trials and received 5.1% of ATMP-designated funding in trials in the European Union (EU) in 2019, highlighting the relatively low proportion of TEPs being developed. The realization of TEPs being marketed has yet to be fulfilled, with few products being approved. Since 2009, 90 TEP-based clinical trials have been undertaken in the EU. Of these 90, 25 were Phase I/II trials, 35 were Phase II, 28 were Phase III, and two were Phase IV trials. This review provides an overview of TEPs in development, identifying musculoskeletal, cardiovascular, and skin/connective tissue disorders as the main therapeutic areas of interest. Commercial sponsors have funded most trials, and a significantly higher proportion of late-phase trials. Furthermore, this study has identified a shift toward the use of allogeneic cells in TEPs and increased activity in the proportion of early phase trials listed. This indicates a renewed interest in TEP development as sponsors adapt to the new regulation, with prospects of more TEP market authorization applications in the future. Impact Statement Tissue-engineered products (TEPs) consist of engineered cells or tissues produced to regenerate, repair, or replace a dysfunctional, diseased, or absent human tissue. This article evaluates the regulatory landscape of TEPs and identifies the trends in clinical trial activity in the European Union (EU) since the introduction of Regulation (EC) No 1394/2007. This article identifies trends in TEP development, highlighting the most active member states, commercial involvement, a shift toward the use of allogeneic cells and a renewed interest in TEP development in recent years.

Encapsulation of rat bone marrow-derived mesenchymal stem cells (rBMMSCs) in collagen type I containing platelet-rich plasma for osteoarthritis treatment in rat model.

Osteoarthritis (OA) is the most common form of degenerative joint disease, affecting more than 25% of the adults despite its prevalence in the elderly population. Most of the current therapeutic modalities aim at symptomatic treatment which lingers the disease progression. In recent years, regenerative medicine such as stem cell transplantation and tissue engineering has been suggested as a potential curative intervention for OA. The objective of this current study was to assess the safety and efficacy of an injectable tissue-engineered construct composed of rat bone marrow mesenchymal stem cells (rBMMSCs), platelet-rich plasma (PRP), and collagen type I in rat model of OA. To produce collagen type I, PRP and rBMMSCs, male Wistar rats were ethically euthanized. After isolation, culture, expansion and characterization of rBMMSCs, tissue-engineered construct was formed by a combination of appropriate amount of collagen type I, PRP and rBMMSCs. In vitro studies were conducted to evaluate the effect of PRP on chondrogenic differentiation capacity of encapsulated cells. In the following, the tissue-engineered construct was injected in knee joints of rat models of OA (24 rats in 4 groups: OA, OA + MSC, OA + collagen + MSC + PRP, OA + MSC + collagen). After 6weeks, the animals were euthanized and knee joint histopathology examinations of knee joint samples were performed to evaluate the effect of each treatment on OA. Tissue-engineered construct was successfully manufactured and in vitro assays demonstrated the relevant chondrogenic genes and proteins expression were higher in PRP group than that of others. Histopathological findings of the knee joint samples showed favorable regenerative effect of rBMMSCs + PRP + collagen group compared to others. We introduced an injectable tissue-engineered product composed of rBMMSCs + PRP + collagen with potential regenerative effect on cartilage that has been damaged by OA.

The success of biomaterial-based tissue engineering strategies for peripheral nerve regeneration.

Peripheral nerve injury is a clinically common injury that causes sensory dysfunction and locomotor system degeneration, which seriously affects the quality of the patients' daily life. Long gapped defects in large nerve are difficult to repair via surgery and limited donor source of autologous nerve greatly challenges the successful nerve repair by transplantation. Significantly, remarkable progress has been made in repairing the peripheral nerve injury using artificial nerve grafts and a variety of products for peripheral nerve repair have emerged been approved globally in recent years. The raw materials of these commercial products includes natural/synthetic polymers, extracellular matrix. Despite a lot of effort, the desirable functional recovery still remains great challenges in long gapped nerve defects. Thus this review discusses the recent development of tissue engineering products for peripheral nerve repair and the design of bionic grafts improving the local microenvironment for accelerating nerve regeneration against locomotor disorder, which may provide potential strategies for the repair of long gaps or thick nerve defects by multifunctional biomaterials.

The potential of functionalized dressing releasing flavonoids facilitates scar-free healing.

Scars are pathological marks left after an injury heals that inflict physical and psychological harm, especially the great threat to development and aesthetics posed by oral and maxillofacial scars. The differential expression of genes such as transforming growth factor-β, local adherent plaque kinase, and yes-related transcriptional regulators at infancy or the oral mucosa is thought to be the reason of scarless regenerative capacity after tissue defects. Currently, tissue engineering products for defect repair frequently overlook the management of postoperative scars, and inhibitors of important genes alone have negative consequences for the organism. Natural flavonoids have hemostatic, anti-inflammatory, antioxidant, and antibacterial properties, which promote wound healing and have anti-scar properties by interfering with the transmission of key signaling pathways involved in scar formation. The combination of flavonoid-rich drug dressings provides a platform for clinical translation of compounds that aid in drug disintegration, prolonged release, and targeted delivery. Therefore, we present a review of the mechanisms and effects of flavonoids in promoting scar-free regeneration and the application of flavonoid-laden dressings.

Ion modulatory treatments toward functional self-assembled neocartilage

Signals that recapitulate in vitro the conditions found in vivo, such as hypoxia or mechanical forces, contribute to the generation of tissue-engineered hyaline-like tissues. The cell regulatory processes behind hypoxic and mechanical stimuli rely on ion concentration; iron is required to degrade the hypoxia inducible factor 1a (HIF1α) under normoxia, whereas the initiation of mechanotransduction requires the cytoplasmic increase of calcium concentration. In this work, we propose that ion modulation can be used to improve the biomechanical properties of self-assembled neocartilage constructs derived from rejuvenated expanded minipig rib chondrocytes. The objectives of this work were 1) to determine the effects of iron sequestration on self-assembled neocartilage constructs using two doses of the iron chelator deferoxamine (DFO), and 2) to evaluate the performance of the combined treatment of DFO and ionomycin, a calcium ionophore that triggers cytoplasmic calcium accumulation. This study employed a two-phase approach. In Phase I, constructs treated with a high dose of DFO (100 µM) exhibited an 87% increase in pyridinoline crosslinks, a 57% increase in the Young's modulus, and a 112% increase in the ultimate tensile strength (UTS) of the neotissue. In Phase II, the combined use of both ion modulators resulted in 150% and 176% significant increases in the Young's modulus and UTS of neocartilage constructs, respectively; for the first time, neocartilage constructs achieved a Young's modulus of 11.76±3.29 MPa and UTS of 4.20±1.24 MPa. The results of this work provide evidence that ion modulation can be employed to improve the biomechanical properties in engineered neotissues. Statement of significanceThe translation of tissue-engineered products requires the development of strategies capable of producing biomimetic neotissues in a replicable, controllable, and cost-effective manner. Among other functions, Fe2+ and Ca2+ are involved in the control of the hypoxic response and mechanotransduction, respectively. Both stimuli, hypoxia and mechanical forces, are known to favor chondrogenesis. This study utilized ion modulators to improve the mechanical properties self-assembled neocartilage constructs derived from expanded and rejuvenated costal chondrocytes via Fe2+ sequestration and Ca2+ influx, alone or in combination. The results indicate that ion modulation induced tissue maturation and a significant improvement of the mechanical properties, and holds potential as a tool to mitigate the need for bioreactors and engineer hyaline-like tissues.

A versatile approach for temporary storage and shipping of in vitro cultured cells, cell sheets and tissue engineered constructs – a preliminary report

• Device was made with readily available raw materials and can be used with ease in a DIY manner. • Device offers leak-proof and aseptic containment of the contents during storage and shipping process. • Device is versatile in its use where dishes having cell monolayers, cell sheets, cell encapsulated gels and cell seeded scaffolds can be stored or shipped. • Device is scalable, simple to handle, can be made for a single or multi-use purpose, and can be resizable to load other culture vessels. Temporary storage/ shipping of cell/ tissue engineering products from bench to bedside is a key aspect of regenerative medicine. The current proof-of-concept study presents a multipurpose device for temporary storage/ shipping of cell culture dishes containing cell/ tissue constructs. The device, made with readily available raw materials, contains three elements viz. a specialized lid, polymeric plates having grooves and a set of nuts and bolts. As part of the performance evaluation, the device was first subjected to a simulated storage/ shipping process, wherein the leak-proof and aseptic containment of the contents was demonstrated. Subsequently, the setup was used for temporary storage/ shipping of dishes having (a) L929 cell monolayers cultured on treated surfaces, (b) SIRC, HaCaT and A549 cell sheets cultured on thermo-responsive surfaces, (c) HOS-cell encapsulated agar gels and (d) HOS-cell seeded silk fibroin mats. The results showed that the health of cell monolayers/ cell sheets/ tissue constructs after the process was comparable to that before the process. The device was scalable, simple to handle, can be made for a single or multi-use purpose, and can be resizable to load other culture vessels. The design of the storage/ shipping device described in this report thus offers versatile features and applications.

Long-term and short-term preservation strategies for tissue engineering and regenerative medicine products: state of the art and emerging trends.

There is an ever-growing need of human tissues and organs for transplantation. However, the availability of such tissues and organs is insufficient by a large margin, which is a huge medical and societal problem. Tissue engineering and regenerative medicine (TERM) represent potential solutions to this issue and have therefore been attracting increased interest from researchers and clinicians alike. But the successful large-scale clinical deployment of TERM products critically depends on the development of efficient preservation methodologies. The existing preservation approaches such as slow freezing, vitrification, dry state preservation, and hypothermic and normothermic storage all have issues that somehow limit the biomedical applications of TERM products. In this review, the principles and application of these approaches will be summarized, highlighting their advantages and limitations in the context of TERM products preservation.

The Advanced Therapies Treatment Centers and Their Network: A Model for the Accelerated Adoption of Advanced Therapies.

Emerging advanced therapies that include cell and gene therapies and tissue-engineered products offer substantial therapeutic benefits. They also present challenges for health services in their modes of delivery to patients. Funding was made available in the United Kingdom to establish three advanced therapies treatment centers and a network to coordinate their activities, supported by the Cell and Gene Therapy Catapult. The aim of this initiative was to grow the advanced therapies sector in the United Kingdom by enhancing access to the National Health Service for patients and industry through close collaboration between advanced therapy companies and publicly funded services and regulators. In this study, we describe the initiative's antecedents, its collaborative structures and management, and its activities. A guiding concept in shaping and assessing progress has been the idea of <i>institutional readiness</i>, an idea developed in the context of social sciences that defines and so can measure movement toward an organization's full competence in delivering new technologies and approaches. We also report the initiative's outcomes and impacts as assessed by ourselves and by third parties. As the initiative has progressed, it has excited increasing interest from advanced therapy companies who were not aware of or engaged in it at the outset and from health care systems that wished to learn from its practices. It is to further that end that we present our study.

Vascularization in Bioartificial Parenchymal Tissue: Bioink and Bioprinting Strategies.

Among advanced therapy medicinal products, tissue-engineered products have the potential to address the current critical shortage of donor organs and provide future alternative options in organ replacement therapy. The clinically available tissue-engineered products comprise bradytrophic tissue such as skin, cornea, and cartilage. A sufficient macro- and microvascular network to support the viability and function of effector cells has been identified as one of the main challenges in developing bioartificial parenchymal tissue. Three-dimensional bioprinting is an emerging technology that might overcome this challenge by precise spatial bioink deposition for the generation of a predefined architecture. Bioinks are printing substrates that may contain cells, matrix compounds, and signaling molecules within support materials such as hydrogels. Bioinks can provide cues to promote vascularization, including proangiogenic signaling molecules and cocultured cells. Both of these strategies are reported to enhance vascularization. We review pre-, intra-, and postprinting strategies such as bioink composition, bioprinting platforms, and material deposition strategies for building vascularized tissue. In addition, bioconvergence approaches such as computer simulation and artificial intelligence can support current experimental designs. Imaging-derived vascular trees can serve as blueprints. While acknowledging that a lack of structured evidence inhibits further meta-analysis, this review discusses an end-to-end process for the fabrication of vascularized, parenchymal tissue.

Natural Soybean Milk-Derived Bioactive Coatings for Enhanced Wound Healing.

Foodborne biomaterials, derived from diets, comprise selfassembled collections of many micro- or nanoscale units with abundant nutrients and active substances. In this study, soybean milk (SBM) was selected as a tissue engineering product for simple and feasible wound repair. SBM is a common drink prepared from soybeans and is rich in soy protein, soy isoflavones, and other bioactive components. Thus, SBM has substantial potential for antioxidation and tissue remodeling. Here, the multifunctional effect of SBM as a bioactive coating for promoting wound healing was studied. The results showed that SBM has good biocompatibility and biological activity. It efficiently scavenges intracellular reactive oxygen species, significantly enhances epithelial cell migration, and improves angiogenesis, thereby accelerating tissue remodeling. The results of animal experiments further confirmed that the SBM-bioinspired coating has promising applications for cutaneous wound regeneration.

Insight and Recent Advances into the Role of Topography on the Cell Differentiation and Proliferation on Biopolymeric Surfaces.

It is well known that surface topography plays an important role in cell behavior, including adhesion, migration, orientation, elongation, proliferation and differentiation. Studying these cell functions is essential in order to better understand and control specific characteristics of the cells and thus to enhance their potential in various biomedical applications. This review proposes to investigate the extent to which various surface relief patterns, imprinted in biopolymer films or in polymeric films coated with biopolymers, by utilizing specific lithographic techniques, influence cell behavior and development. We aim to understand how characteristics such as shape, dimension or chemical functionality of surface relief patterns alter the orientation and elongation of cells, and thus, finally make their mark on the cell proliferation and differentiation. We infer that such an insight is a prerequisite for pushing forward the comprehension of the methodologies and technologies used in tissue engineering applications and products, including skin or bone implants and wound or fracture healing.

Exploiting Nonlinear Fiber Patterning to Control Tubular Scaffold Mechanical Behavior

AbstractMelt electrowriting is an additive manufacturing technique capable of fabricating highly biomimetic polymer scaffolds with high‐resolution microarchitecture for a range of tissue engineering applications. The use of a rotating mandrel to fabricate tubular scaffolds using this technique is increasing in popularity; however, the translation of many novel scaffold designs that have been explored on flat collectors has yet to be realized using mandrels. This study reports novel tools to automatically generate scaffold gcode for several new tubular scaffold designs, investigating a range of auxetic pore geometries and open unit cell designs. Through optimization of printing parameters, the novel scaffold designs are successfully printed and mechanically tested to assess tensile properties. Open unit cells significantly reduce the tensile stiffness of scaffolds manufactured with closed pores. Auxetic scaffolds could also be widely tuned using the novel gcode generator tool to exhibit similar stress–strain profiles to typical crosshatch scaffolds but could be made to expand to desired radial dimensions. Finally, heterogeneous auxetic constructs are also fabricated with regions of various radial compliances. This study presents several, mechanically validated novel scaffold designs that are of interest for future applications in targeted tissue engineering product development as well as in soft robotic actuation.

Progress and prospect of technical and regulatory challenges on tissue-engineered cartilage as therapeutic combination product.

Hyaline cartilage plays a critical role in maintaining joint function and pain. However, the lack of blood supply, nerves, and lymphatic vessels greatly limited the self-repair and regeneration of damaged cartilage, giving rise to various tricky issues in medicine. In the past 30 years, numerous treatment techniques and commercial products have been developed and practiced in the clinic for promoting defected cartilage repair and regeneration. Here, the current therapies and their relevant advantages and disadvantages will be summarized, particularly the tissue engineering strategies. Furthermore, the fabrication of tissue-engineered cartilage under research or in the clinic was discussed based on the traid of tissue engineering, that is the materials, seed cells, and bioactive factors. Finally, the commercialized cartilage repair products were listed and the regulatory issues and challenges of tissue-engineered cartilage repair products and clinical application would be reviewed.

Cryogenically structured gelatin-based hydrogel as a resorbable macroporous matrix for biomedical technologies

Objective: to investigate the biological properties of a matrix made of cryogenically structured hydrogel in the form of a macroporous gelatin sponge, as well as the possibility of creating cell-engineered constructs (CECs) on its basis. Materials and methods. The main components of the cryogenically structured hydrogel were gelatin (type A) obtained from porcine skin collagen, N-(3-dimethylaminopropyl)-N’-ethylcarbodiimide, (EDC) and urea (all from Sigma-Aldrich, USA). Surface morphology was examined using scanning electron microscopy (SEM). The degree of swelling in water of the samples was determined by gravimetric method. Cytotoxicity was studied on NIH3T3, a fibroblast cell line isolated from a mouse, and on human adipose-derived mesenchymal stem/stromal cells (hAMSCs) using IncuCyte ZOOM (EssenBioscience, USA). The metabolic activity of hAMSCs was assessed using PrestoBlue™ reagents (Invitrogen™, USA). To create CECs, we used hAMSCs, human hepatocellular carcinoma cell line HepG2 or human umbilical vein endothelial cell lines EA.hy926. Albumin content in the culture medium was determined by enzyme immunoassay. Ammonia metabolism rate was assessed after 90 minutes of incubation with 1 mM ammonium chloride (Sigma-Aldrich, USA) diluted in a culture medium on day 15 of the experiment. Results. Obtaining a cryogenically structured hydrogel scaffold in the form of macroporous gelatin sponge included freezing an aqueous solution of a gelatin+urea mixture, removal of polycrystals of frozen solvent by lyophilization, extraction of urea with ethanol and treatment of the cryostructurate with an ethanol solution of EDC. Scanning electron microscopy identified three types of pores on the carrier surface: large (109 ± 17 μm), medium (39 ± 10 μm), and small (16 ± 6 μm). The degree of swelling in water of the matrix samples was 3.8 ± 0.2 g H2O per 1 g of dry polymer. The macroporous gelatin sponge as a part of CEC was found to have the ability to support adhesion and proliferation of hAMSCs, EA.hy926 and HepG2 for 28, 15 and 9 days, respectively. Albumin secretion and ammonia metabolism when HepG2 cells were cultured on the gelatin sponge were detected. Conclusion. The use of a matrix made from macroporous cryogenically structured gelatin-based hydrogel for tissue engineering products is shown to be promising using a cell-engineered liver construct as a case.

Electrospun Membrane Surface Modification by Sonocoating with HA and ZnO:Ag Nanoparticles-Characterization and Evaluation of Osteoblasts and Bacterial Cell Behavior In Vitro.

Guided tissue regeneration and guided bone regeneration membranes are some of the most common products used for bone regeneration in periodontal dentistry. The main disadvantage of commercially available membranes is their lack of bone cell stimulation and easy bacterial colonization. The aim of this work was to design and fabricate a new membrane construct composed of electrospun poly (D,L-lactic acid)/poly (lactic-co-glycolic acid) fibers sonocoated with layers of nanoparticles with specific properties, i.e., hydroxyapatite and bimetallic nanocomposite of zinc oxide–silver. Thus, within this study, four different variants of biomaterials were evaluated, namely: poly (D,L-lactic acid)/poly (lactic-co-glycolic acid) biomaterial, poly(D,L-lactic acid)/poly (lactic-co-glycolic acid)/nano hydroxyapatite biomaterial, poly (D,L-lactic acid)/poly (lactic-co-glycolic acid)/nano zinc oxide–silver biomaterial, and poly (D,L-lactic acid)/poly (lactic-co-glycolic acid)/nano hydroxyapatite/nano zinc oxide–silver biomaterial. First, it was demonstrated that the wettability of biomaterials—a prerequisite property important for ensuring desired biological response—was highly increased after the sonocoating process. Moreover, it was indicated that biomaterials composed of poly (D,L-lactic acid)/poly (lactic-co-glycolic acid) with or without a nano hydroxyapatite layer allowed proper osteoblast growth and proliferation, but did not have antibacterial properties. Addition of a nano zinc oxide–silver layer to the biomaterial inhibited growth of bacterial cells around the membrane, but at the same time induced very high cytotoxicity towards osteoblasts. Most importantly, enrichment of this biomaterial with a supplementary underlayer of nano hydroxyapatite allowed for the preservation of antibacterial properties and also a decrease in the cytotoxicity towards bone cells, associated with the presence of a nano zinc oxide–silver layer. Thus, the final structure of the composite poly (D,L-lactic acid)/poly (lactic-co-glycolic acid)/nano hydroxyapatite/nano zinc oxide–silver seems to be a promising construct for tissue engineering products, especially guided tissue regeneration/guided bone regeneration membranes. Nevertheless, additional research is needed in order to improve the developed construct, which will simultaneously protect the biomaterial from bacterial colonization and enhance the bone regeneration properties.

Automatic Programmable Bioreactor with pH Monitoring System for Tissue Engineering Application.

Tissue engineering technology has been advanced and applied to various applications in the past few years. The presence of a bioreactor is one key factor to the successful development of advanced tissue engineering products. In this work, we developed a programmable bioreactor with a controlling program that allowed each component to be automatically operated. Moreover, we developed a new pH sensor for non-contact and real-time pH monitoring. We demonstrated that the prototype bioreactor could facilitate automatic cell culture of L929 cells. It showed that the cell viability was greater than 80% and cell proliferation was enhanced compared to that of the control obtained by a conventional cell culture procedure. This result suggests the possibility of a system that could be potentially useful for medical and industrial applications, including cultured meat, drug testing, etc.

Dual-Layered Approach of Ovine Collagen-Gelatin/Cellulose Hybrid Biomatrix Containing Graphene Oxide-Silver Nanoparticles for Cutaneous Wound Healing: Fabrication, Physicochemical, Cytotoxicity and Antibacterial Characterisation.

Tissue engineering products have grown rapidly as an alternative solution available for chronic wound and burn treatment. However, some drawbacks include additional procedures and a lack of antibacterial properties that can impair wound healing, which are issues that need to be tackled effectively for better wound recovery. This study aimed to develop a functionalized dual-layered hybrid biomatrix composed of collagen sponge (bottom layer) to facilitate cell proliferation and adhesion and gelatin/cellulose hydrogel (outer layer) incorporated with graphene oxide and silver nanoparticles (GC-GO/AgNP) to prevent possible external infections post-implantation. The bilayer hybrid scaffold was crosslinked with 0.1% (w/v) genipin for 6 h followed by advanced freeze-drying technology. Various characterisation parameters were employed to investigate the microstructure, biodegradability, surface wettability, nanoparticles antibacterial activity, mechanical strength, and biocompatibility of the bilayer bioscaffold towards human skin cells. The bilayer bioscaffold exhibited favourable results for wound healing applications as it demonstrated good water uptake (1702.12 ± 161.11%), slow rate of biodegradation (0.13 ± 0.12 mg/h), and reasonable water vapour transmission rate (800.00 ± 65.85 gm−2 h−1) due to its porosity (84.83 ± 4.48%). The biomatrix was also found to possess hydrophobic properties (48.97 ± 3.68°), ideal for cell attachment and high mechanical strength. Moreover, the hybrid GO-AgNP promoted antibacterial properties via the disk diffusion method. Finally, biomatrix unravelled good cellular compatibility with human dermal fibroblasts (>90%). Therefore, the fabricated bilayer scaffold could be a potential candidate for skin wound healing application.

A Mini-Pig Mandibular Defect Model for Evaluation of Craniomaxillofacial Bone Regeneration.

Craniomaxillofacial bone defects represent a clinical challenge in the fields of maxillofacial surgery and (implant) dentistry. Regeneration of these bone defects requires the application of bone graft materials that facilitate new bone formation in a safe, reliable, and predictive manner. In addition to autologous bone graft, several types of (synthetic) bone substitute materials have become clinically available, and still major efforts are focused on improving such bone substitute materials by optimizing their properties. Given the regulatory necessity to evaluate the performance of new bone substitute materials for craniomaxillofacial bone regeneration in a large animal model with similarity to human bone before clinical application, we here describe a mini-pig mandibular bone defect model that allows for the creation of multiple (critical-size) bone defects within the mandibular body of a single animal. As examples of bone substitute materials, we utilize both the clinically used BioOss granules and an experimental calcium phosphate cement for filling the created defects. Regarding the latter, its advantages are the injectable application within the defect site, in which the material rapidly sets, and the tailorable degradation properties via the inclusion of hydrolytically degrading polymeric particles. For both bone substitute materials, we show the suitability of the bone defect model to assess bone regeneration via histology and micro-computed tomography. Impact statement Given the regulatory necessity to evaluate the performance of new bone substitute materials for craniomaxillofacial bone regeneration in a large animal model with similarity to the human bone before clinical application, we here describe a mini-pig mandibular bone defect model that allows for the creation of multiple (critical-size) bone defects within the mandibular body of a single animal that can be used for the evaluation of the bone regenerative capacity of new bone grafting materials as well as tissue-engineered products for alveolar bone regeneration.

Construction and Biocompatibility Evaluation of Fibroin/Sericin-Based Scaffolds.

Because tissue responses to implants determine the success or failure of tissue engineering products, fibroin/sericin-based scaffolds including bionic silk scaffolds, native silk fibers, fibroin fibers, and regenerated fibroin have been fabricated, and their biocompatibility was investigated. Fibroin/sericin-based scaffolds were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Bionic silk scaffolds were beneficial to silk fiber formation through self-assembly. Histological and immunofluorescent staining analysis demonstrated that bionic silk scaffolds did not show significant inflammatory responses. Immunization analysis showed that soluble fibroin and sericin did not show obvious immunogenicity. This work supplied an effective approach to design fibroin/sericin-based scaffolds for tissue engineering and drug delivery.

Mesenchymal Stem Cell Seeding on 3D Scaffolds.

Evaluation of mesenchymal stem cell seeding efficiency in three-dimensional (3D) scaffolds is a critical step for constructing a potent and useful tissue engineering product for regenerative medicine. To determine the quantity of cells seeded on a scaffold, their condition and viability, and/or to confirm cell adhesion to the scaffold surface, a number of cellular assays are used. The assays are most often based on a direct or indirect colorimetric-, fluorimetric-, bioluminescent-, or isotope-based measurement of changes reflecting the activity of cellular processes. This chapter presents a selection of assays measuring the efficiency of cell seeding on scaffolds, that is, the MTS (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium)) assay, the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay, the ATP (adenosine triphosphate), DAPI (4',6-diamidino-2-phenylindole) assay, the Alamar Blue (7-hydroxy-10-oxidophenoxazin-10-ium-3-one, resazurin) assay and the Pico Green dsDNA (N'-[3-(dimethylamino)propyl]-N,N-dimethyl-N'-[4-[(E)-(3-methyl-1,3-benzothiazol-2-ylidene)methyl]-1-phenylquinolin-1-ium-2-yl]propane-1,3-diamine) assay. These assays monitor the number of viable cells, sometimes in conjunction with specifying cell membrane integrity, determine enzymatic activity associated with cell metabolism, measure cell proliferation rate, and assess the total protein or DNA content in the cell-scaffold construct. The choice of the appropriate methods and the details for testing 3D cultures are of utmost importance to properly evaluate tissue engineering products. Still, developing standards for assessment of cell-scaffold constructs remains a challenge in tissue engineering.