Anterior Cruciate Ligament Tissue Engineering Research Articles

Could an Anterior Cruciate Ligament Be Tissue-Engineered from Silk?

Silk has a long history as an exclusive textile, but also as a suture thread in medicine; nowadays, diverse cell carriers are manufactured from silk. Its advantages are manifold, including high biocompatibility, biomechanical strength and processability (approved for nearly all manufacturing techniques). Silk's limitations, such as scarcity and batch to batch variations, are overcome by gene technology, which allows for the upscaled production of recombinant "designed" silk proteins. For processing thin fibroin filaments, the sericin component is generally removed (degumming). In contrast to many synthetic biomaterials, fibroin allows for superior cell adherence and growth. In addition, silk grafts demonstrate superior mechanical performance and long-term stability, making them attractive for anterior cruciate ligament (ACL) tissue engineering. Looking at these promising properties, this review focusses on the responses of cell types to silk variants, as well as their biomechanical properties, which are relevant for ACL tissue engineering. Meanwhile, sericin has also attracted increasing interest and has been proposed as a bioactive biomaterial with antimicrobial properties. But so far, fibroin was exclusively used for experimental ACL tissue engineering approaches, and fibroin from spider silk also seems not to have been applied. To improve the bone integration of ACL grafts, silk scaffolds with osteogenic functionalization, silk-based tunnel fillers and interference screws have been developed. Nevertheless, signaling pathways stimulated by silk components remain barely elucidated, but need to be considered during the development of optimized silk cell carriers for ACL tissue engineering.

IN VIVO LIGAMENTOGENESIS IN EMBROIDERED POLY(LACTIC-CO-Ε-CAPROLACTONE) / POLYLACTIC ACID SCAFFOLDS FUNCTIONALIZED BY FLUORINATION AND HEXAMETHYLENE DIISOCYANATE CROSS-LINKED COLLAGEN FOAMS

Although autografts represent the gold standard for anterior cruciate ligament (ACL) reconstruction, tissue-engineered ACLs provide a prospect to minimize donor site morbidity and limited graft availability. This given study characterizes the ligamentogenesis in embroidered poly(L-lactide-co-ε-caprolactone) (P(LA-CL)) / polylactic acid (PLA) constructs using a dynamic nude mice xenograft model. (P(LA-CL))/PLA scaffolds remained either untreated (co) or were functionalized by gas fluorination (F), collagen foam cross-linked with hexamethylene diisocyanate (HMDI) (coll), or gas fluorination combined with the foam (F+coll). Cell free constructs or those seeded for 1 week with lapine ACL ligamentocytes were implanted into nude mice for 12 weeks. Following explantation, biomechanical properties, cell vitality and content, histopathology of scaffolds (including organs: liver, kidney, spleen), sulphated glycosaminoglycan (sGAG) contents and biomechanical properties were assessed.Implantation of the scaffolds did not negatively affect mice weight development and organs, indicating biocompatibility. All scaffolds maintained their size and shape for the duration of the implantation. A high cell viability was detected in the scaffolds prior to and following implantation. Coll or F+coll scaffolds seeded with cells yielded superior macroscopic properties when compared to the controls. Mild signs of inflammation (foreign-body giant cells, hyperemia) were limited to scaffolds without collagen. Microscopical score values and sGAG content did not differ significantly. Although remaining stable in vivo, elastic modulus, maximum force, tensile strength and strain at Fmax were significantly lower in the in vivo compared to the samples cultured 1 week in vitro, but did not differ between scaffold subtypes, except for a higher maximum force in F+coll compared with F samples (in vivo). Scaffold functionalization with fluorinated collagen foam provides a promising approach for ACL tissue engineering.(shared first authorship)Acknowledgement: The study was supported by DFG grants SCHU1979/9-1 and SCHU1979/14-1.

Biologics, Stem Cells, Growth Factors, Platelet-Rich Plasma, Hemarthrosis, and Scaffolds May Enhance Anterior Cruciate Ligament Surgical Treatment

AbstractBiologics including mesenchymal stem cells (MSCs), growth factors, and platelet-rich plasma may enhance anterior cruciate ligament (ACL) reconstruction and even ACL primary repair. In addition, hemarthrosis after acute ACL injury represents a source of biologic factors. MSCs can differentiate into both fibroblasts and osteoblasts, potentially providing a transition between the ligament or graft and bone. MSCs also produce cytokines and growth factors necessary for cartilage, bone, ligament, and tendon regeneration. MSC sources including bone marrow, synovium, adipose tissue, ACL-remnant, patellar tendon, and umbilical cord. Also, scaffolds may represent a tool for ACL tissue engineering. A scaffold should be porous, which allows cell growth and flow of nutrients and waste, should be biocompatible, and might have mechanical properties that match the native ACL. Scaffolds have the potential to deliver bioactive molecules or stem cells. Synthetic and biologically derived scaffolds are widely available. ACL reconstruction with improved outcome, ACL repair, and ACL tissue engineering are promising goals. Level of EvidenceLevel V, expert opinion.

In vivo ligamentogenesis in embroidered poly(lactic-co-ε-caprolactone) / polylactic acid scaffolds functionalized by fluorination and hexamethylene diisocyanate cross-linked collagen foams

Although autografts represent the gold standard for anterior cruciate ligament (ACL) reconstruction, tissue-engineered ACLs provide a prospect to minimize donor site morbidity and limited graft availability. This study characterizes the ligamentogenesis in embroidered poly(L-lactide-co-ε-caprolactone) (P(LA-CL)) / polylactic acid (PLA) constructs using a dynamic nude mice xenograft model. (P(LA-CL))/PLA scaffolds remained either untreated (co) or were functionalized by gas fluorination (F), collagen foam cross-linked with hexamethylene diisocyanate (HMDI) (coll), or F combined with the foam (F + coll). Cell-free constructs or those seeded for 1 week with lapine ACL ligamentocytes were implanted into nude mice for 12 weeks. Following explantation, cell vitality and content, histo(patho)logy of scaffolds (including organs: liver, kidney, spleen), sulphated glycosaminoglycan (sGAG) contents and biomechanical properties were assessed.Scaffolds did not affect mice weight development and organs, indicating no organ toxicity. Moreover, scaffolds maintained their size and shape and reflected a high cell viability prior to and following implantation. Coll or F + coll scaffolds seeded with cells yielded superior macroscopic properties compared to the controls. Mild signs of inflammation (foreign-body giant cells and hyperemia) were limited to scaffolds without collagen. Microscopical score values and sGAG content did not differ significantly. Although remaining stable after explantation, elastic modulus, maximum force, tensile strength and strain at Fmax were significantly lower in explanted scaffolds compared to those before implantation, with no significant differences between scaffold subtypes, except for a higher maximum force in F + coll compared with F samples (in vivo). Scaffold functionalization with fluorinated collagen foam provides a promising approach for ACL tissue engineering.Graphical abstracta Lapine anterior cruciate ligament (LACL): red arrow, posterior cruciate ligament: yellow arrow. Medial anterior meniscotibial ligament: black arrow. b Explant culture to isolate LACL fibroblasts. c Scaffold variants: co: controls; F: functionalization by gas-phase fluorination; coll: collagen foam cross-linked with hexamethylene diisocyanate (HMDI). c1-2 Embroidery pattern of the scaffolds. d Scaffolds were seeded with LACL fibroblasts using a dynamical culturing approach as depicted. e Scaffolds were implanted subnuchally into nude mice, fixed at the nuchal ligament and sacrospinal muscle tendons. f Two weeks after implantation. g Summary of analyses performed. Scale bars 1 cm (b, d), 0.5 cm (c). (sketches drawn by G.S.-T. using Krita 4.1.7 [Krita foundation, The Netherlands]).

Cruciate Ligament Cell Sheets Can Be Rapidly Produced on Thermoresponsive poly(glycidyl ether) Coating and Successfully Used for Colonization of Embroidered Scaffolds.

Anterior cruciate ligament (ACL) cell sheets combined with biomechanically competent scaffolds might facilitate ACL tissue engineering. Since thermoresponsive polymers allow a rapid enzyme-free detachment of cell sheets, we evaluated the applicability of a thermoresponsive poly(glycidyl ether) (PGE) coating for cruciate ligamentocyte sheet formation and its influence on ligamentocyte phenotype during sheet-mediated colonization of embroidered scaffolds. Ligamentocytes were seeded on surfaces either coated with PGE or without coating. Detached ligamentocyte sheets were cultured separately or wrapped around an embroidered scaffold made of polylactide acid (PLA) and poly(lactic-co-ε-caprolactone) (P(LA-CL)) threads functionalized by gas-phase fluorination and with collagen foam. Ligamentocyte viability, protein and gene expression were determined in sheets detached from surfaces with or without PGE coating, scaffolds seeded with sheets from PGE-coated plates and the respective monolayers. Stable and vital ligamentocyte sheets could be produced within 24 h with both surfaces, but more rapidly with PGE coating. PGE did not affect ligamentocyte phenotype. Scaffolds could be colonized with sheets associated with high cell survival, stable gene expression of ligament-related type I collagen, decorin, tenascin C and Mohawk after 14 d and extracellular matrix (ECM) deposition. PGE coating facilitates ligamentocyte sheet formation, and sheets colonizing the scaffolds displayed a ligament-related phenotype.

Potential In Vitro Tissue-Engineered Anterior Cruciate Ligament by Copolymerization of Polyvinyl Alcohol and Collagen.

Suitable tissue-engineered scaffolds to replace human anterior cruciate ligament (ACL) are well developed clinically as the development of tissue engineering. As water-soluble polymer compound, polyvinyl alcohol (PVA) has been wildly used as the materials to replace ACL. The aim of this study was to explore the feasibility of constructing tissue-engineered ACL by the copolymerization of PVA and collagen (PVA/COL). PVA and COL were copolymerized at a mass ratio of 3:1. The pore size and porosity of the scaffold were observed by electron microscope. The maximum tensile strength of the scaffold was determined by electronic tension machine. The cytotoxicity of the scaffold was evaluated by MTT assay. The morphology of ACL cells cultured on the surface of the scaffold was observed by inverted microscope. The degradation of the scaffold was recorded in the rabbit model. The average pore size of the polymer scaffold was 100 to 150 μm and the porosity was about 90%. The maximum tensile strength of the scaffold material was 8.10 ± 0.28 MPa. PVA/COL could promote the proliferation ability of 3T3 cells. ACL cells were successfully cultured on the surface of PVA/COL scaffold, with natural growth rate, differentiation, and proliferation. Twenty-four weeks after the plantation of scaffold, obvious degradations were observed in vivo. The model of in-vitro tissue-engineered ACL was successfully established by PVA/COL scaffolds.

The effect of melt electrospun writing fiber orientation onto cellular organization and mechanical properties for application in Anterior Cruciate Ligament tissue engineering

The effect of melt electrospun writing fiber arrangement on cellular behavior has not yet been thoroughly investigated. Cellular orientation is particularly important in the context of ligament tissue engineering for orthopedic applications whereby a high degree of cell alignment is present in the native tissue. The aim of this study was to investigate the response of human mesenchymal stem cells (hMSC) to three different patterned porous polycaprolactone scaffolds (aligned, crimped and random) fabricated by melt electrospinning writing, resulting in 20 μm diameter electrospun fibers. Cell orientation was investigated over 4 weeks in vitro and it was demonstrated that the aligned pattern was capable of orientating the hMSCs towards the main direction of the fibers and this feature was maintained over the entire culture period whereas the orientation was rapidly lost in the crimped pattern. In order to fabricate a functional scaffold for ligament tissue engineering, the scaffolds were rolled in three bundles, subsequently braided and combined with a bone compartment (consisting of a melt electrospun scaffold seeded with osteogenically induced hMSCs) for the development of a Bone-Ligament-Bone (BLB) construct. The mechanical properties of non-cellularized and cellularized BLB constructs were assessed under both quasi-static and cyclic conditions. This revealed that the in vitro maturation significantly softened the BLB constructs and that the mechanical properties were several fold lower than those of native tissue. The cyclic testing demonstrated that the presence of cell sheets resulted in increased resilience and elasticity, even though the global mechanical properties were decreased for the in vitro matured constructs (regardless of the pattern). In conclusion, we demonstrated that melt electrospinning writing fiber organization can induce spontaneous cell alignment and that large cellularized BLB constructs with complex geometry can achieve mechanical resilience under cyclic stretching.

Viscoelastic Behavior of Embroidered Scaffolds for ACL Tissue Engineering Made of PLA and P(LA-CL) After In Vitro Degradation.

A rupture of the anterior cruciate ligament (ACL) is the most common knee ligament injury. Current applied reconstruction methods have limitations in terms of graft availability and mechanical properties. A new approach could be the use of a tissue engineering construct that temporarily reflects the mechanical properties of native ligament tissues and acts as a carrier structure for cell seeding. In this study, embroidered scaffolds composed of polylactic acid (PLA) and poly(lactic-co-ε-caprolactone) (P(LA-CL)) threads were tested mechanically for their viscoelastic behavior under in vitro degradation. The relaxation behavior of both scaffold types (moco: mono-component scaffold made of PLA threads, bico: bi-component scaffold made of PLA and P(LA-CL) threads) was comparable to native lapine ACL. Most of the lapine ACL cells survived 32 days of cell culture and grew along the fibers. Cell vitality was comparable for moco and bico scaffolds. Lapine ACL cells were able to adhere to the polymer surfaces and spread along the threads throughout the scaffold. The mechanical behavior of degrading matrices with and without cells showed no significant differences. These results demonstrate the potential of embroidered scaffolds as an ACL tissue engineering approach.

Migrating Myofibroblastic Iliotibial Band-Derived Fibroblasts Represent a Promising Cell Source for Ligament Reconstruction.

The iliotibial band (ITB) is a suitable scaffold for anterior cruciate ligament (ACL) reconstruction, providing a sufficient mechanical resistance to loading. Hence, ITB-derived fibroblasts attract interest for ligament tissue engineering but have so far not been characterized. This present study aimed at characterizing ITB fibroblasts before, during, and after emigration from cadaveric ITB explants to decipher the emigration behavior and to utilize their migratory capacity for seeding biomaterials. ITB and, for comparison, ACL tissues were assessed for the content of alpha smooth muscle actin (αSMA) expressing fibroblasts and degeneration. The cell survival and αSMA expression were monitored in explants used for cell isolation, monolayer, self-assembled ITB spheroids, and spheroids seeded in polyglycolic acid (PGA) scaffolds. The protein expression profile of targets typically expressed by ligamentocytes (collagen types I–III, elastin, lubricin, decorin, aggrecan, fibronectin, tenascin C, CD44, β1-integrins, vimentin, F-actin, αSMA, and vascular endothelial growth factor A [VEGFA]) was compared between ITB and ACL fibroblasts. A donor- and age-dependent differing percentage of αSMA positive cells could be detected, which was similar in ITB and ACL tissues despite the grade of degeneration being significantly higher in the ACL due to harvesting them from OA knees. ITB fibroblasts survived for several months in an explant culture, continuously forming monolayers with VEGFA and an increased αSMA expression. They shared their expression profile with ACL fibroblasts. αSMA decreased during the monolayer to spheroid/scaffold transition. Using self-assembled spheroids, the migratory capacity of reversible myofibroblastic ITB cells can be utilized for colonizing biomaterials for ACL tissue engineering and to support ligament healing.

Transient Scleraxis Overexpression Combined with Cyclic Strain Enhances Ligament Cell Differentiation.

Efforts to generate tissue-engineered anterior cruciate ligament replacements are limited by a lack of methods to derive mature ligament cells. Viral overexpression of the tendon/ligament marker scleraxis (Scx) can drive cell differentiation; however, the use of viral vectors hampers translation to clinical use. In this study, C3H10T1/2 cells were transiently transfected with expression vectors containing the full-length murine Scx cDNA and cultured in three-dimensional collagen hydrogels under static or cyclic strain for up to 14 days. β-galactosidase (LacZ) transfected cells served as controls. Cell morphology and gene expression for ligament-related genes, in addition to contraction (hydrogel width), mechanical properties, and glycosaminoglycan (GAG) and DNA content of hydrogels, were quantified and compared over time, between Scx and LacZ groups, and between static and cyclically strained constructs. Increased Scx expression was maintained for the entire 14-day study in both static and cyclically strained constructs. In static culture, overexpression of Scx resulted in greater cell elongation and construct contraction compared to LacZ controls. There were no differences in gene expression, DNA, or GAG content between Scx and LacZ constructs cultured under static conditions and no differences in DNA content between Scx and LacZ constructs. When exposed to cyclic strain, Scx-overexpressing cells maintained the elongated phenotype exhibited in static constructs, increased GAG production compared to static culture, and increased expression of the ligament-related genes collagen type I, decorin, and tenascin-C compared to strained LacZ controls. Cyclically strained constructs containing Scx-overexpressing cells had increased maximum load and stiffness compared to LacZ controls. The maintenance of increased Scx expression throughout the 14 day study and subsequent increases in ligament marker gene expression and mechanical properties with cyclic, but not static strain, suggest that transient transfection may be a viable alternative to viral transduction of Scx for ligament engineering studies and support a synergistic effect of Scx and mechanical strain on driving early ligament cell differentiation.

Suitability of a PLCL fibrous scaffold for soft tissue engineering applications: A combined biological and mechanical characterisation.

Poly(lactide-co-ε-caprolactone) (PLCL) has been reported to be a good candidate for tissue engineering because of its good biocompatibility. Particularly, a braided PLCL scaffold (PLL/PCL ratio = 85/15) has been recently designed and partially validated for ligament tissue engineering. In the present study, we assessed the in vivo biocompatibility of acellular and cellularised scaffolds in a rat model. We then determined its in vitro biocompatibility using stem cells issued from both bone marrow and Wharton Jelly. From a biological point of view, the scaffold was shown to be suitable for tissue engineering in all these cases. Secondly, while the initial mechanical properties of this scaffold have been previously reported to be adapted to load-bearing applications, we studied the evolution in time of the mechanical properties of PLCL fibres due to hydrolytic degradation. Results for isolated PLCL fibres were extrapolated to the fibrous scaffold using a previously developed numerical model. It was shown that no accumulation of plastic strain was to be expected for a load-bearing application such as anterior cruciate ligament tissue engineering. However, PLCL fibres exhibited a non-expected brittle behaviour after two months. This may involve a potential risk of premature failure of the scaffold, unless tissue growth compensates this change in mechanical properties. This combined study emphasises the need to characterise the properties of biomaterials in a pluridisciplinary approach, since biological and mechanical characterisations led in this case to different conclusions concerning the suitability of this scaffold for load-bearing applications.

* Hierarchically Structured Electrospun Scaffolds with Chemically Conjugated Growth Factor for Ligament Tissue Engineering.

The anterior cruciate ligament (ACL) of the knee is vital for proper joint function and is commonly ruptured during sports injuries or car accidents. Due to a lack of intrinsic healing capacity and drawbacks with allografts and autografts, there is a need for a tissue-engineered ACL replacement. Our group has previously used aligned sheets of electrospun polycaprolactone nanofibers to develop solid cylindrical bundles of longitudinally aligned nanofibers. We have shown that these nanofiber bundles support cell proliferation and elongation and the hierarchical structure and material properties are similar to the native human ACL. It is possible to combine multiple nanofiber bundles to create a scaffold that attempts to mimic the macroscale structure of the ACL. The goal of this work was to develop a hierarchical bioactive scaffold for ligament tissue engineering using connective tissue growth factor (CTGF)-conjugated nanofiber bundles and evaluate the behavior of mesenchymal stem cells (MSCs) on these scaffolds in vitro and in vivo. CTGF was immobilized onto the surface of individual nanofiber bundles or scaffolds consisting of multiple nanofiber bundles. The conjugation efficiency and the release of conjugated CTGF were assessed using X-ray photoelectron spectroscopy, assays, and immunofluorescence staining. Scaffolds were seeded with MSCs and maintained in vitro for 7 days (individual nanofiber bundles), in vitro for 21 days (scaled-up scaffolds of 20 nanofiber bundles), or in vivo for 6 weeks (small scaffolds of 4 nanofiber bundles), and ligament-specific tissue formation was assessed in comparison to non-CTGF-conjugated control scaffolds. Results showed that CTGF conjugation encouraged cell proliferation and ligament-specific tissue formation in vitro and in vivo. The results suggest that hierarchical electrospun nanofiber bundles conjugated with CTGF are a scalable and bioactive scaffold for ACL tissue engineering.

Imaging of the Postoperative Anterior Cruciate Ligament: Emphasis on New Surgical and Imaging Methods.

The aim of anterior cruciate ligament (ACL) reconstruction is to restore normal function of the knee, but unfortunately abnormal kinematics and a predisposition to knee osteoarthritis occur in a significant percentage of patients. So there is an ongoing need to improve treatment options and long-term outcome of patients with a ruptured ACL. With the recent advancements in the field of ACL tissue engineering, the focus of treatment for ACL injuries is changing from resection and reconstruction toward repair and regeneration. Several new ACL repair methods were recently introduced as an alternative to traditional ACL reconstructive procedures. Radiologists must become familiar with these new surgical methods to interpret their appearance correctly on postoperative imaging studies. This article provides an overview of the latest advancements in ACL surgical methods and discusses the role of imaging to assess the postoperative ACL including both standard and advanced imaging methods.

Anterior Cruciate Ligament Tissue Engineering: A Review of Current Investigations

Anterior Cruciate Ligament Tissue Engineering: A Review of Current Investigations

Evaluation of polycaprolactone scaffold with basic fibroblast growth factor and fibroblasts in an athymic rat model for anterior cruciate ligament reconstruction.

Anterior cruciate ligament (ACL) rupture is a common ligamentous injury often necessitating surgery. Current surgical treatment options include ligament reconstruction with autograft or allograft, which have their inherent limitations. Thus, there is interest in a tissue-engineered substitute for use in ACL regeneration. However, there have been relatively few in vivo studies to date. In this study, an athymic rat model of ACL reconstruction was used to evaluate electrospun polycaprolactone (PCL) grafts, with and without the addition of basic fibroblast growth factor (bFGF) and human foreskin fibroblasts. We examined the regenerative potential of tissue-engineered ACL grafts using histology, immunohistochemistry, and mechanical testing up to 16 weeks postoperatively. Histology showed infiltration of the grafts with cells, and immunohistochemistry demonstrated aligned collagen deposition with minimal inflammatory reaction. Mechanical testing of the grafts demonstrated significantly higher mechanical properties than immediately postimplantation. Acellular grafts loaded with bFGF achieved 58.8% of the stiffness and 40.7% of the peak load of healthy native ACL. Grafts without bFGF achieved 31.3% of the stiffness and 28.2% of the peak load of healthy native ACL. In this in vivo rodent model study for ACL reconstruction, the histological and mechanical evaluation demonstrated excellent healing and regenerative potential of our electrospun PCL ligament graft.

Athymic rat model for evaluation of engineered anterior cruciate ligament grafts.

Anterior cruciate ligament (ACL) rupture is a common ligamentous injury that often requires surgery because the ACL does not heal well without intervention. Current treatment strategies include ligament reconstruction with either autograft or allograft, which each have their associated limitations. Thus, there is interest in designing a tissue-engineered graft for use in ACL reconstruction. We describe the fabrication of an electrospun polymer graft for use in ACL tissue engineering. This polycaprolactone graft is biocompatible, biodegradable, porous, and is comprised of aligned fibers. Because an animal model is necessary to evaluate such a graft, this paper describes an intra-articular athymic rat model of ACL reconstruction that can be used to evaluate engineered grafts, including those seeded with xenogeneic cells. Representative histology and biomechanical testing results at 16 weeks postoperatively are presented, with grafts tested immediately post-implantation and contralateral native ACLs serving as controls. The present study provides a reproducible animal model with which to evaluate tissue engineered ACL grafts, and demonstrates the potential of a regenerative medicine approach to treatment of ACL rupture.

A biodegradable tri-component graft for anterior cruciate ligament reconstruction.

Bone-patellar tendon-bone (BPTB) autografts are the gold standard for anterior cruciate ligament (ACL) reconstruction because the bony ends allow for superior healing and anchoring through bone-to-bone regeneration. However, the disadvantages of BPTB grafts include donor site morbidity and patellar rupture. In order to incorporate bone-to-bone healing without the risks associated with harvesting autogenous tissue, a biodegradable and synthetic tri-component graft was fabricated, consisting of porous poly(1,8-octanediol-co-citric acid)-hydroxyapatite nanocomposites (POC-HA) and poly(l-lactide) (PLL) braids. All regions of the tri-component graft were porous and the tensile properties were in the range of the native ACL. When these novel grafts were used to reconstruct the ACL of rabbits, all animals after 6 weeks were weight-bearing and showed good functionality. Histological assessment confirmed tissue infiltration throughout the entire scaffold and tissue ingrowth and interlocking within the bone tunnels, which is favourable for graft fixation. In conclusion, this pilot study suggests that a tri-component, biodegradable graft is a promising strategy to regenerate tissue types necessary for ACL tissue engineering, and provides a basis for developing an off-the-shelf graft for ACL repair. Copyright © 2014 John Wiley & Sons, Ltd.

In vitro and in vivo evaluation of heparin mediated growth factor release from tissue-engineered constructs for anterior cruciate ligament reconstruction.

Anterior cruciate ligament (ACL) rupture is a common injury often necessitating surgical treatment with graft reconstruction. Due to limitations associated with current graft options, there is interest in a tissue-engineered substitute for use in ACL regeneration. While they represent an important step in translation to clinical practice, relatively few in vivo studies have been performed to evaluate tissue-engineered ACL grafts. In the present study, we immobilized heparin onto electrospun polycaprolactone scaffolds as a means of incorporating basic fibroblast growth factor (bFGF) onto the scaffold. In vitro, we demonstrated that human foreskin fibroblasts (HFFs) cultured on bFGF-coated scaffolds had significantly greater cell proliferation. In vivo, we implanted electrospun polycaprolactone grafts with and without bFGF into athymic rat knees. We analyzed the regenerated ACL using histological methods up to 16 weeks post-implantation. Hematoxylin and eosin staining demonstrated infiltration of the grafts with cells, and picrosirius red staining demonstrated aligned collagen fibers. At 16 weeks postop, mechanical testing of the grafts demonstrated that the grafts had approximately 30% the maximum load to failure of the native ACL. However, there were no significant differences observed between the graft groups with or without heparin-immobilized bFGF. While this study demonstrates the potential of a regenerative medicine approach to treatment of ACL rupture, it also demonstrates that in vitro results do not always predict what will occur in vivo.

In vitro characterization of self-assembled anterior cruciate ligament cell spheroids for ligament tissue engineering.

Tissue engineering of an anterior cruciate ligament (ACL) implant with functional enthesis requires site-directed seeding of different cell types on the same scaffold. Therefore, we studied the suitability of self-assembled three-dimensional spheroids generated by lapine ACL ligament fibroblasts for directed scaffold colonization. The spheroids were characterized in vitro during 14 days in static and 7 days in dynamic culture. Size maintenance of self-assembled spheroids, the vitality, the morphology and the expression pattern of the cells were monitored. Additionally, we analyzed the total sulfated glycosaminoglycan, collagen contents and the expression of the ligament components type I collagen, decorin and tenascin C on protein and for COL1A1, DCN and TNMD on gene level in the spheroids. Subsequently, the cell colonization of polylactide-co-caprolactone [P(LA-CL)] and polydioxanone (PDS) polymer scaffolds was assessed in response to a directed, spheroid-based seeding technique. ACL cells were able to self-assemble spheroids and survive over 14 days. The spheroids decreased in size but not in cellularity depending on the culture time and maintained or even increased their differentiation state. The area of P[LA-CL] scaffolds, colonized after 14 days by the cells of one spheroid, was in average 4.57 ± 2.3 mm(2). Scaffolds consisting of the polymer P[LA-CL] were more suitable for colonization by spheroids than PDS embroideries. We conclude that ACL cell spheroids are suitable as site-directed seeding strategy for scaffolds in ACL tissue engineering approaches and recommend the use of freshly assembled spheroids for scaffold colonization, due to their balanced proliferation and differentiation.

Graphene Oxide Reinforced Degradable Polyurethane for Anterior Cruciate Ligament Tissue Engineering

Here we report the development of Poly Urethane (PU)/ graphene oxide composite used as the scaffold of anterior cruciate ligament tissue engineering. The influences of the GO on the composite were studied by FTIR, SEM and XRD. The Youngs modulus of the composite is 30.6 MPa compared to that of PU`s 6.8 MPa. The GO induced heterogeneous crystal increasing should be the reason for the composite modulus improving, as well as the interaction between the GO and PU. The good biocompatibility of the composite testified by cell viability experiment indicates the promising candidates of the material as the ACL tissue engineering scaffold.