Tissue Culture-treated Polystyrene Research Articles

Human mesenchymal stromal cell adhesion and expansion on fluoropolymer surfaces modified with oxygen and nitrogen-rich plasma polymers

Fluorinated ethylene propylene (FEP) vessels are of significant interest for therapeutic cell biomanufacturing applications due to their chemical inertness, hydrophobic surface, and high oxygen permeability. However, these properties also limit the adhesion and survival of anchorage-dependent cells. Here, we develop novel plasma polymer coatings to modify FEP surfaces, enhancing the adhesion and expansion of human mesenchymal stromal cells (hMSCs). Similar to commercially available tissue culture polystyrene vessels, oxygen-rich or nitrogen-rich surface chemistries can be achieved using this approach. While steam sterilization increased the roughness of the coatings and altered the surface chemistry, the overall wettability and oxygen or nitrogen-rich nature of the coatings were maintained. In the absence of proteins during initial cell attachment, cells adhered to surfaces even in the presence of chelators, whereas adhesion was abrogated with chelator in a protein-containing medium, suggesting that integrin-mediated adhesion predominates over physicochemical tethering in normal protein-containing cell seeding conditions. Albumin adsorption was more elevated on nitrogen-rich coatings compared to the oxygen-rich coatings, which was correlated with a higher extent of hMSC expansion after 3 days. Both the oxygen and nitrogen-rich coatings significantly improved hMSC adhesion and expansion compared to untreated FEP. FEP surfaces with nitrogen-rich coatings were practically equivalent to commercially available standard tissue culture-treated polystyrene surfaces in terms of hMSC yields. Plasma polymer coatings show significant promise in expanding the potential usage of FEP-based culture vessels for cell therapy applications.

Efficient material-induced activation of monocyte-derived dendritic cells releasing surface molecules, matrix metalloproteinases, and growth factors needed for regenerative tissue remodeling

New experimental approaches for tissue repair have recently been proposed and include the application of natural or synthetic biomaterials and immune cells. Herein, fully synthetic poly(glycidyl ether) (PGE) copolymer coatings are evaluated as bioinstructive materials for the in vitro culture and intrinsic activation of human immune cells. Immature monocyte-derived dendritic cells (moDCs) are exposed to PGE brush and gel coatings of varying copolymer composition, wettability, and deformability immobilized on polystyrene culture dishes. Compared to moDCs cultured on standard tissue culture-treated polystyrene, activation marker levels on the cell surface are strongly enhanced on PGE substrates. Thereby, moDCs undergo a distinct morphological change and reach levels of activation comparable to those achieved by toll-like receptor (TLR) ligand liposaccharide (LPS), specifically for the expression of costimulatory molecules CD86 and CD40 as well as human leukocyte antigen (HLA)-DR. In addition, PGE coatings induce a significantly enhanced level of programmed cell death ligands 1 and 2 (PD-L1/-L2) on the moDC surface, two molecules crucially involved in maintaining immune tolerance. In addition, an increased release of matrix metalloproteinases MMP-1 and MMP-7, as well as transforming growth factor (TGF)-β1 and epidermal growth factor (EGF) was observed in moDCs cultured on PGE substrates. As fully synthetic biomaterials, PGE coatings demonstrate intrinsic functional competence in instructing immature human moDCs for phenotypic activation in vitro, accompanied by the secretion of bioactive molecules, which are known to be crucial for tissue regeneration. Hence, PGE coatings hold strong potential for immune-modulating implant coatings, while PGE-activated moDCs are promising candidates for future clinical cell-based immunoengineering therapies.

HIGH ANTIOXIDATION-CAPACITY STEM CELLS ENHANCE CARTILAGE REGENERATION

Stem cells are known to have low levels of intracellular reactive oxygen species (ROS) and high levels of glutathione. ROS are thought to interact with several pathways that affect the transcription machinery required for stem cell differentiation, and are critical for maintaining stem cell function. In this study, we are developing a new fluorescent probe that rapidly and reversibly reacts with glutathione (GSH), the most abundant non-protein thiol in living cells that acts as an antioxidant and redox regulator.Multipotent perivascular progenitor cells derived from human ESCs (hESC-PVPCs): Differentiated ESCs as embryoid bodies in the presence of BMP4 to induce mesoderm differentiation followed by a simple cell selection strategy using attachment of single cells onto collagen-coated dishes. Differential gene expression profiling was performed among H9 hESCs, EBs induced by BMP4 and naturally selected CD140B+CD44+ population at Day 7 (PVPCs). Colony-forming assay: GSHhigh and GSHlow PVPCs were plated on 10-cm tissue culture-treated polystyrene dishes in triplicate in growth medium and cultured for 14 days. Transwell migration assay: GSHhigh and GSHlow PVPCs at passage 4 were resuspended at 1 × 106/mL in the migration medium and seeded in the upper chamber. The following human recombinant SDF-1 and PDGF-AA proteins were used as chemoattractants in the lower compartment.Probe-GSH conjugate shows shifts in fluorescence excitation and emission spectra that enables ratiometric measurement of GSH levels. Using these properties, stem cells can be purified by FACS-based technology according to intracellular GSH level. We are developing a protocol both for comparing GSH level in stem cell from different culture conditions and for preparing stem cells with high-GSH level . Our results reveal that GSHhigh PVPC purified by FACS show increased colony forming ability compared with that GSHlow PVPC, indicating that intracellular GSH contributes to the maintenance of stemness. Moreover, transplantation of GSHlow PVPC is more effective than that of GSHlow PVPC for cartilage regeneration in osteochondral defect.This technique enable FACS-based sorting of stem cells according to intracellular GSH levels and thus investigation of functional role of GSH (high antioxidant capacity) in the stem cell maintenance and chondrogenic differentiation.

Establishing Neurospheres in vitro by a 3D Suspension Culture System and Evaluating Neurite Growth to Facilitate Nerve Repair

The overall goal of this research is to promote nerve repair through applications of carbon‐based nanoparticles and mesenchymal stem cells in a synthetic extracellular matrix. We hypothesize that this combination of nerve tissue engineering technologies will provide us with the optimal environment for neuronal growth. Towards this end, we assess the suitability of neurospheres to be used as an in vitro model to evaluate axonal outgrowth and for the production of cell‐free extracellular matrices to facilitate neuronal growth. Here we employ a new commercial, high throughput 3D culture system to establish neurospheres. A single 3D bioreactor provides a stress‐free environment to produce a 10‐fold increase in the number of neurospheres compared to the conventional 96‐well U‐bottom plate. This in vitro method alleviates the challenges of a co‐culture process, producing neurospheres with a more efficient and cost‐effective approach. Neurospheres were established using primary neurons isolated from 1 to 3‐day old rat hippocampi. Reactors were coated with no‐stick reagents to prevent cell adhesion to the reactor chamber during neurosphere assembly. After 48 hours in the bioreactor, seeded neurospheres were transferred to substrate‐coated (laminin + poly‐D‐lysine (PDL), PDL only) and tissue culture plates (tissue culture treated polystyrene (TCPS)). Immunochemistry and microscopy were used to identify and quantify the neurosphere size and neurite length. The data shows that laminin provides superior neurite outgrowth for neurospheres compared to non‐biological (TCPS) and conventional (PDL) synthetic substrates. Our next steps are to incorporate mesenchymal stem cell and endothelial cell populations to develop an in vitro organoid for nerve repair studies with nanoparticles and synthetic extracellular matrices. The long‐term goal of this project is to generate a regenerative medicine strategy to treat peripheral nerve injuries.

Non-coating method for non-adherent cell culture using high molecular weight dextran sulfate and bovine serum albumin

Non-adherent cell culture surface has been widely used for producing cell spheroids and cell aggregates. The purpose of this study was to formulate a new method for non-adherent cell culture without coating or surface-modification that has been needed. We found that high-molecular-weight dextran sulfate (DS) and bovine serum albumin (BSA) synergistically prevented cell adhesion in media supplemented with no or low serum. This method worked on tissue culture-treated polystyrene surfaces as well as on commercially available low-attachment- and untreated polystyrene surfaces. Further investigation revealed that BSA may mediate the adsorption of DS to the surface. In addition, as the adsorption of fluorescently labeled fibronectin was inhibited by BSA alone, it appears that protein adsorption and cell adhesion do not always correlate. Finally, we demonstrated the successful formation of HepG2 spheroids and cardiomyocyte aggregates using this method. In conclusion, cell adhesion can be effectively suppressed by simply adding DS and BSA to the culture medium without coating or surface modification, and it may be useful for generating cell spheroids and aggregates.

Thermoresponsive Poly(glycidyl ether) Brush Coatings on Various Tissue Culture Substrates-How Block Copolymer Design and Substrate Material Govern Self-Assembly and Phase Transition.

Thermoresponsive poly(glycidyl ether) brushes can be grafted to applied tissue culture substrates and used for the fabrication of primary human cell sheets. The self-assembly of such brushes is achieved via the directed physical adsorption and subsequent UV immobilization of block copolymers equipped with a short, photo-reactive benzophenone-based anchor block. Depending on the chemistry and hydrophobicity of the benzophenone anchor, we demonstrate that such block copolymers exhibit distinct thermoresponsive properties and aggregation behaviors in water. Independent on the block copolymer composition, we developed a versatile grafting-to process which allows the fabrication of poly(glycidyl ether) brushes on various tissue culture substrates from dilute aqueous-ethanolic solution. The viability of this process crucially depends on the chemistry and hydrophobicity of, both, benzophenone-based anchor block and substrate material. Utilizing these insights, we were able to manufacture thermoresponsive poly(glycidyl ether) brushes on moderately hydrophobic polystyrene and polycarbonate as well as on rather hydrophilic polyethylene terephthalate and tissue culture-treated polystyrene substrates. We further show that the temperature-dependent switchability of the brush coatings is not only dependent on the cloud point temperature of the block copolymers, but also markedly governed by the hydrophobicity of the surface-bound benzophenone anchor and the subjacent substrate material. Our findings demonstrate that the design of amphiphilic thermoresponsive block copolymers is crucial for their phase transition characteristics in solution and on surfaces.

Blockade of macrophage adhesion to CD200-treated polystyrene culture surface.

CD200 is an anti-inflammatory transmembrane glycoprotein in the immunoglobulin superfamily. The interaction of CD200 and its receptor CD200R has shown to inhibit inflammatory response of myeloid cells to foreign materials. The purpose of this study is to create a CD200 immobilized biomaterial surface through polydopamine coating to suppress macrophage cell adhesion and reduce inflammatory cytokine secretion accordingly by macrophages. In this study, tissue-culture treated polystyrene (TCPS) surface was modified with biotin through polydopamine coating. Purified CD200-streptavidin fusion protein was then immobilized onto the biotinylated TCPS surface through the high affinity between biotin and streptavidin. Mouse J774A.1 macrophages were seeded on CD200-immobilized TCPS surface to evaluate the effect of CD200 on preventing macrophage attachment. The effects of CD200-immobilized TCPS surface on pro-inflammatory cytokine secretion from J774A.1 macrophages were measured by enzyme-linked immunosorbent assay. As a result, CD200-immobilized TCPS surface suppressed macrophage attachment for up to 9 hr. The level of IL-6 and TNF-α secreted from J774A.1 macrophages interacted with CD200-coated TCPS surface was reduced by 36.3% and 32.4%, respectively.

Radiopaque Scaffolds Based on Electrospun Iodixanol/Polycaprolactone Nanofibrous Composites

Grafts based on biodegradable polymer scaffolds are increasingly used in tissue-engineering applications as they facilitate natural tissue regeneration. However, monitoring the position and integrity of these scaffolds over time is challenging due to radiolucency. In this study, we used an electrospinning method to fabricate biodegradable scaffolds based on polycaprolactone (PCL) and iodixanol, a clinical contrast agent. Scaffolds were implanted subcutaneously into C57BL/6 mice and monitored in vivo using longitudinal X-ray imaging and micro-computed tomography (CT). The addition of iodixanol altered the physicochemical properties of the PCL scaffold; notably, as the iodixanol concentration increased, the fiber diameter decreased. Radiopacity was achieved with corresponding signal enhancement as iodine concentration increased while exhibiting a steady time-dependent decrease of 0.96% per day in vivo. The electrospun scaffolds had similar performance with tissue culture-treated polystyrene in supporting the attachment, viability, and proliferation of human mesenchymal stem cells. Furthermore, implanted PCL-I scaffolds had more intense acute inflammatory infiltrate and thicker layers of maturing fibrous tissue. In conclusion, we developed radiopaque, biodegradable, biocompatible scaffolds whose position and integrity can be monitored noninvasively. The successful development of other imaging enhancers may further expand the use of biodegradable scaffolds in tissue engineering applications.

Impact of composite scaffold degradation rate on neural stem cell persistence in the glioblastoma surgical resection cavity.

Tumoricidal neural stem cells (NSCs) are an emerging therapy to combat glioblastoma (GBM). This therapy employs genetically engineered NSCs that secrete tumoricidal agents to seek out and kill tumor foci remaining after GBM surgical resection. Biomaterial scaffolds have previously been utilized to deliver NSCs to the resection cavity. Here, we investigated the impact of scaffold degradation rate on NSC persistence in the brain resection cavity. Composite acetalated dextran (Ace-DEX) gelatin electrospun scaffolds were fabricated with two distinct degradation profiles created by changing the ratio of cyclic to acyclic acetal coverage of Ace-DEX. In vitro, fast degrading scaffolds were fully degraded by one week, whereas slow degrading scaffolds had a half-life of >56days. The scaffolds also retained distinct degradation profiles in vivo. Two different NSC lines readily adhered to and remained viable on Ace-DEX gelatin scaffolds, in vitro. Therapeutic NSCs secreting tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) had the same TRAIL output as tissue culture treated polystyrene (TCPS) when seeded on both scaffolds. Furthermore, secreted TRAIL was found to be highly potent against the human derived GBM cell line, GBM8, in vitro. Firefly luciferase expressing NSCs were seeded on scaffolds, implanted in a surgical resection cavity and their persistence in the brain was monitored by bioluminescent imaging (BLI). NSC loaded scaffolds were compared to a direct injection (DI) of NSCs in suspension, which is the current clinical approach to NSC therapy for GBM. Fast and slow degrading scaffolds enhanced NSC implantation efficiency 2.87 and 3.08-fold over DI, respectively. Interestingly, scaffold degradation profile did not significantly impact NSC persistence. However, persistence and long-term survival of NSCs was significantly greater for both scaffolds compared to DI, with scaffold implanted NSCs still detected by BLI at day 120 in most mice. Overall, these results highlight the benefit of utilizing a scaffold for application of tumoricidal NSC therapy for GBM.

Enhanced Hepatic Differentiation of Human Induced Pluripotent Stem Cells Using Gas-Permeable Membrane.

Although oxygen is a vital nutrient for the hepatocytes in vitro, few reports have focused on its effect during hepatic differentiation of induced pluripotent stem cells (iPSCs). In this report, we performed the hepatic differentiation of human iPSCs (hiPSCs) under different atmospheric oxygen concentrations and oxygen supply fluxes to investigate the effects of oxygen in terms of both the concentration and the supply flux. Results demonstrate that direct oxygenation through a polydimethylsiloxane (PDMS) membrane enhances the maturation and efficient production of hiPSC-derived hepatocyte-like cells (iHeps). Thus, direct oxygenation through a PDMS membrane is a better alternative culture method over conventional tissue culture-treated polystyrene (TCPS) plates for the maturation of hiPSC-derived hepatocytes in vitro.

Laminin functionalized biomimetic apatite to regulate the adhesion and proliferation behaviors of neural stem cells.

BackgroundFunctionalizing biomaterial substrates with biological signals shows promise in regulating neural stem cell (NSC) behaviors through mimicking cellular microenvironment. However, diverse methods for immobilizing biological molecules yields promising results but with many problems. Biomimetic apatite is an excellent carrier due to its non-toxicity, good biocompatibility, biodegradability, and favorable affinity to plenty of molecules. Therefore, it may provide a promising alternative in regulating NSC behaviors.MethodsBiomimetic apatite immobilized with the extracellular protein – laminin (LN) was prepared through coprecipitation process in modified Dulbecco’s phosphate-buffered saline (DPBS) containing LN. The amount of coprecipitated LN and their release kinetics were examined. The adhesion and proliferation behaviors of NSC on biomimetic apatite immobilized with LN were investigated.ResultsThe coprecipitation approach provided well retention of LN within biomimetic apatite up to 28 days, and supported the adhesion and proliferation of NSCs without cytotoxicity. For long-term cultivation, NSCs formed neurosphere-like aggregates on non-functionalized biomimetic apatite. A monolayer of proliferated NSCs on biomimetic apatite with coprecipitated LN was observed and even more stable than the positive control of LN coated tissue-culture treated polystyrene (TCP).ConclusionThe simple and reproducible method of coprecipitation suggests that biomimetic apatite is an ideal carrier to functionalize materials with biological molecules for neural-related applications.

Osteogenic Differentiation of Bone Marrow-Derived Mesenchymal Stem Cells in Electrospun Silica Nonwoven Fabrics.

Silica nonwoven fabrics (SNFs) with enough mechanical strength are candidates as implantable scaffolds. Culture of cells therein is expected to affect the proliferation and differentiation of the cells through cell–cell and cell–SNF interactions. In this study, we examined three-dimensional (3D) SNFs as a scaffold of mesenchymal stem cells (MSCs) for bone tissue engineering applications. The interconnected highly porous microstructure of 3D SNFs is expected to allow omnidirectional cell–cell interactions, and the morphological similarity of a silica nanofiber to that of a fibrous extracellular matrix can contribute to the promotion of cell functions. 3D SNFs were prepared by the sol–gel process, and their mechanical properties were characterized by the compression test and rheological analysis. In the compression test, SNFs showed a compressive elastic modulus of over 1 MPa and a compressive strength of about 200 kPa. These values are higher than those of porous polystyrene disks used for in vitro 3D cell culture. In rheological analysis, the elastic modulus and fracture stress were 3.27 ± 0.54 kPa and 25.9 ± 8.3 Pa, respectively. Then, human bone marrow-derived MSCs were cultured on SNFs, and the effects on proliferation and osteogenic differentiation were evaluated. The MSCs seeded on SNF proliferated, and the thickness of the cell layer became over 80 μm after 14 days of culture. The osteogenic differentiation of MSCs on SNFs was induced by the culture in the commercial osteogenic differentiation medium. The alkaline phosphatase activity of MSCs on SNFs increased rapidly and remained high up to 14 days and was much higher than that on two-dimensional tissue culture-treated polystyrene. The high expression of RUNX2 and intense staining by alizarin red s after differentiation supported that SNFs enhanced the osteogenic differentiation of MSCs. Furthermore, permeation analysis of SNFs using fluorescein isothiocyanate-dextran suggested a sufficient permeability of SNFs for oxygen, minerals, nutrients, and secretions, which is important for maintaining the cell viability and vitality. These results suggested that SNFs are promising scaffolds for the regeneration of bone defects using MSCs, originated from highly porous and elastic SNF characters.

Differential and Interactive Effects of Substrate Topography and Chemistry on Human Mesenchymal Stem Cell Gene Expression.

Variations in substrate chemistry and the micro-structure were shown to have a significant effect on the biology of human mesenchymal stromal cells (hMSCs). This occurs when differences in the surface properties indirectly modulate pathways within numerous signaling networks that control cell fate. To understand how the surface features affect hMSC gene expression, we performed RNA-sequencing analysis of bone marrow-derived hMSCs cultured on tissue culture-treated polystyrene (TCP) and poly(l-lactide) (PLLA) based substrates of differing topography (Fl: flat and Fs: fibrous) and chemistry (Pr: pristine and Am: aminated). Whilst 80% of gene expression remained similar for cells cultured on test substrates, the analysis of differentially expressed genes (DEGs) revealed that surface topography significantly altered gene expression more than surface chemistry. The Fl and Fs topologies introduced opposite directional alternations in gene expression when compared to TCP control. In addition, the effect of chemical treatment interacted with that of topography in a synergistic manner with the Pr samples promoting more DEGs than Am samples in all gene ontology function groups. These findings not only highlight the significance of the culture surface on regulating the overall gene expression profile but also provide novel insights into cell-material interactions that could help further design the next-generation biomaterials to facilitate hMSC applications. At the same time, further studies are required to investigate whether or not the observations noted correlate with subsequent protein expression and functionality of cells.

An optimized culture system for notochordal cell expansion with retention of phenotype.

BackgroundNotochordal (NC) cells display therapeutic potential in treating degeneration of the intervertebral disc. However, research on their phenotype and function is limited by low‐cell yields and a lack of appropriate methodology for cell expansion. Utilizing porcine cells, this study aimed to develop an optimized culture system which allows expansion of NC cell populations with retention of phenotype.MethodsPost‐natal porcine and foetal human nucleus pulposus tissue was compared histologically and expression of known NC cell marker genes by porcine NC cells was analyzed. Porcine NC cells were isolated from six‐week post‐natal discs and cultured in vitro under varied conditions: (1) DMEM vs αMEM; (2) laminin‐521, fibronectin, gelatin and uncoated tissue culture‐treated polystyrene (TCP); (3) 2% O2 vs normoxia; (4) αMEM (300 mOsm/L) vs αMEM (400 mOsm/L); (5) surface stiffness of 0.5 and 4 kPa and standard TCP. Adherence, proliferation, morphology and expression of NC cell markers were assessed over a 14‐day culture period.ResultsNative porcine nucleus pulposus tissue demonstrated similar morphology to human foetal tissue and porcine NC cells expressed known notochordal markers (CD24, KRT8, KRT18, KRT19, and T). Use of αMEM media and laminin‐521‐coated surfaces showed the greatest cell adherence, proliferation and retention of NC cell morphology and phenotype. Proliferation of NC cell populations was further enhanced in hypoxia (2%) and phenotypic retention was improved on 0.5 kPa culture surfaces.DiscussionOur model has demonstrated an optimized system in which NC cell populations may be expanded while retaining a notochordal phenotype. Application of this optimized culture system will enable NC cell expansion for detailed phenotypic and functional study, a major advantage over current culture methods described in the literature. Furthermore, the similarities identified between porcine and human NC cells suggest this system will be applicable in human NC cell culture for investigation of their therapeutic potential.

A Novel Fragment Derived from Laminin-411 Facilitates Proliferation and Differentiation of Odontoblast-Like Cells.

The aim for the present study was to evaluate the in vitro effects of iMatrix-411 in odontoblast-like cells. To that end, iMatrix-411 was coated to both nontissue culture treated- (Non-PS) and tissue culture treated-polystyrene (TCPS) multiwells. MDPC-23 cells were seeded into noncoated (control) or coated wells. Optimal coating density and cell proliferation were assessed by cell counting kit-8 (CCK-8) at day two, day three, and day five. Osteo/odontogenic differentiation was evaluated by real-time RT-PCR and alkaline phosphatase (ALP) activity at days seven and eight, respectively. Calcific deposition of cells was visualized by alizarin red staining. Data were analyzed with post hoc Tukey HSD test (p < 0.05). Optimal coating density for iMatrix-411 was 8 μg/cm2. Exposure of MDPC-23 cells to iMatrix-411 in either non-PS or TCPS significantly enhanced proliferative activity. iMatrix-411 elevated ALP activity in both types of culture plates. iMatrix-411 significantly increased the mRNA level of OCN, BSP, OPN, ALP, and DMP-1. Meanwhile, it enhanced the expression of several integrin subunits: ITGA1, ITGA5, ITGAV, ITGB1, and ITGB5. Finally, iMatrix-411 also accelerated the mineralization at day eight in Non-PS. The results indicated iMatrix-411 stimulates proliferation and favours differentiation of odontoblast-like cells.

Osteogenic Potential of Pre-Osteoblastic Cells on a Chitosan-graft-Polycaprolactone Copolymer.

A chitosan-graft-polycaprolactone (CS-g-PCL) copolymer synthesized via a multi-step process was evaluated as a potential biomaterial for the adhesion and growth of MC3T3-E1 pre-osteoblastic cells. A strong adhesion of the MC3T3-E1 cells with a characteristic spindle-shaped morphology was observed from the first days of cell culture onto the copolymer surfaces. The viability and proliferation of the cells on the CS-g-PCL surfaces, after 3 and 7 days in culture, were significantly higher compared to the cells cultured on the tissue culture treated polystyrene (TCPS) control. The osteogenic potential of the pre-osteoblastic cells cultured on CS-g-PCL surfaces was evaluated by determining various osteogenic differentiation markers and was compared to the TCPS control surface. Specifically, alkaline phosphatase activity levels show significantly higher values at both time points compared to TCPS, while secreted collagen into the extracellular matrix was found to be higher on day 7. Calcium biomineralization deposited into the matrix is significantly higher for the CS-g-PCL copolymer after 14 days in culture, while the levels of intracellular osteopontin were significantly higher on the CS-g-PCL surfaces compared to TCPS. The enhanced osteogenic response of the MC3T3-E1 pre-osteoblasts cultured on CS-g-PCL reveals that the copolymer underpins the cell functions towards bone tissue formation and is thus an attractive candidate for use in bone tissue engineering.

Effect of protein adsorption layers and solution treatments on hydroxyapatite deposition on polystyrene plate surfaces in simulated body fluids.

We have developed a method to functionalize polystyrene (PS) cell culture plates with hydroxyapatite (HAp) via protein adsorption layers such as human serum albumin (HSA) in simulated body fluids (SBFs). In order to investigate the versatility the method, in this study the effect of protein adsorption layers on HAp deposition on PS plate surfaces in SBF was evaluated. Pretreatments with alternate soaking process (ASP) using solutions containing calcium ions and phosphate ions followed by incubation with SBF for 24 h resulted in HAp deposition on PS plates with adsorption layers of HSA, type I collagen, hen egg white lysozyme, and poly L-glutamic acid, an acidic protein analogue: the deposition behaviors were correlated with adsorption ability and charge state of proteins. We also demonstrated that commercially available tissue culture-treated PS (TCPS) were directly coated with bone-like HAp using the same ASP and SBF processes. Human mesenchymal stem cells adhered and stretched on the HAp-coated TCPS plates in a similar manner to the case of the HAp-coated PS plates prepared via HSA adsorption layers. The results indicate that the present methods are useful for preparing bone-like HAp-coated cell culture plates that can be utilized function of adsorbed proteins and that are obtainable conveniently and at low-cost.

Immobilization of vitronectin-binding heparan sulfates onto surfaces to support human pluripotent stem cells.

Functionalizing medical devices with polypeptides to enhance their performance has become important for improved clinical success. The extracellular matrix (ECM) adhesion protein vitronectin (VN) is an effective coating, although the chemistry used to attach VN often reduces its bioactivity. In vivo, VN binds the ECM in a sequence-dependent manner with heparan sulfate (HS) glycosaminoglycans. We reasoned therefore that sequence-based affinity chromatography could be used to isolate a VN-binding HS fraction (HS9) for use as a coating material to capture VN onto implant surfaces. Binding avidity and specificity of HS9 were confirmed by enzyme-linked immunosorbent assay (ELISA) and surface plasmon resonance (SPR)-based assays. Plasma polymerization of allylamine (AA) to tissue culture-treated polystyrene (TCPS) was then used to capture and present HS9 as determined by radiolabeling and ELISA. HS9-coated TCPS avidly bound VN, and this layered surface supported the robust attachment, expansion, and maintenance of human pluripotent stem cells. Compositional analysis demonstrated that 6-O- and N-sulfation, as well as lengths greater than three disaccharide units (dp6) are critical for VN binding to HS-coated surfaces. Importantly, HS9 coating reduced the threshold concentration of VN required to create an optimally bioactive surface for pluripotent stem cells. We conclude that affinity-purified heparan sugars are able to coat materials to efficiently bind adhesive factors for biomedical applications. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1887-1896, 2018.

Surface functionalization of tissue culture polystyrene plates with hydroxyapatite under body fluid conditions and its effect on differentiation behaviors of mesenchymal stem cells

The surfaces of polystyrene (PS) cell culture plates were functionalized with hydroxyapatite (HAp) under body fluid conditions utilizing protein adsorption layers and a pretreatment with an alternate soaking process (ASP) using solutions containing calcium and phosphate ions. Adsorption layers of human serum albumin (HSA) formed on the surface of each well of commercial 24-well PS plates by solution processes. CaCl2 and K2HPO4 solutions were alternately added to the wells, the plates were incubated to form the precursors, and this was followed by the addition of simulated body fluid (SBF) and a further incubation for 24h. These treatments resulted in the surfaces of the PS cell culture plates being completely covered with bone-like HAp. The coating of PS plates with HAp promoted the adhesion of mesenchymal stem cells (MSCs) and maintained cell growth that was as fast as that on tissue culture-treated PS (TCPS) plates. Osteogenic differentiation was greater, whereas adipogenic and chondrogenic differentiation was less in the culture on HAp-coated PS plates than in that on TCPS plates. The present method is useful for preparing HAp-coated PS plates at clean benches without the need for any expensive apparatus. HAp coated on PS plates by this method was a bone-like apatite with high bioactivity; therefore, the present HAp-coated PS plates are promising materials for assays of bone-related cells in the bone remodeling process.

Effect of polystyrene and fluoropolymer-based culture vessels on monocyte-based immunotherapy products

Effect of polystyrene and fluoropolymer-based culture vessels on monocyte-based immunotherapy products