Tissue Culture Plastic Research Articles

Accelerated maturation of ARPE-19 cells for the translational assessment of gene therapy.

The human retinal pigment epithelium (RPE) cell line ARPE-19 is widely used as an alternative to primary RPE despite losing many features of primary RPE. We aimed to determine whether a combination of RPE-specific laminin (LN) and nicotinamide (NAM) could improve ARPE-19 redifferentiation to resemble mature RPE and improve the assessment of RPE-specific gene therapy strategies. ARPE-19 cells were propagated on tissue culture plastic supplemented with NAM and human recombinant LN521-coating. RPE maturation was performed by immunocytochemistry and gene expression by qPCR. Viral transduction experiments with adeno-associated virus (AAV)1 or AAV2, carrying a VMD2-driven GFP, were assessed at 2- and 4-weeks post-plating in the different culturing conditions with a low multiplicity of infection. The combination of LN521 coating with NAM supplementation promoted cytoskeletal and tight junction protein reorganization. The expression of maturation markers bestrophin-1 and RPE 65 was promoted concomitantly with a reduction of several epithelial-mesenchymal transition markers, such as TNF-α, TGF-β, CDH2, and vimentin. Redifferentiated ARPE-19 transduced at low multiplicity of infection of both AAV1- and AAV2-VMD2-GFP. Expression of GFP was detected at 2 weeks and increased at 4 weeks post-plating. AAV1 exhibited a greater expression efficacy compared to AAV2 in maturated ARPE-19 cells already after 2 weeks with increased efficiency after 4 weeks. Our study demonstrates an improved maturation protocol for ARPE-19 cells invitro, mimicking an invivo phenotype with the expression of signature genes and improved morphology. Viral-mediated RPE-specific gene expression demonstrates that the combination cultures mimic invivo AAV tropism essential to test new gene therapies for RPE-centered diseases.

Tailored environments for directed mesenchymal stromal cell proliferation and differentiation using decellularized extracellular matrices in conjunction with substrate modulus

Decellularised extracellular matrix (dECM) produced by mesenchymal stromal cells (MSCs) is a promising biomaterial for improving the ex vivo expansion of MSCs. The dECMs are often deposited on high modulus surfaces such as tissue culture plastic or glass, and subsequent differentiation assays often bias towards osteogenesis. We tested the hypothesis that dECM deposited on substrates of varying modulus will produce cell culture environments that are tailored to promote the proliferation and/or lineage-specific differentiation of MSCs. dECM was produced on type I collagen-functionalised polyacrylamide hydrogels with discrete moduli (∼4, 10, and 40 kPa) or in a linear gradient of modulus that spans the same range, and the substrates were used as culture surfaces for MSCs. Fluorescence spectroscopy and mass spectrometry characterization revealed structural compositional changes in the dECM as a function of substrate modulus. Softer substrates (4 kPa) with dECM supported the largest number of MSCs after 7 days (∼1.6-fold increase compared to glass). Additionally, osteogenic differentiation was greatest on high modulus substrates (40 kPa and glass) with dECM. Nuclear translocation of YAP1 was observed on all surfaces with a modulus of 10 kPa or greater and may be a driver for the increased osteogenesis on the high modulus surfaces. These data demonstrate that dECM technology can be integrated with environmental parameters such as substrate modulus to improve/tailor MSC proliferation and differentiation during ex vivo culture. These results have potential impact in the improved expansion of MSCs for tailored therapeutic applications and in the development of advanced tissue engineering scaffolds. Statement of significanceMesenchymal stromal cells (MSCs) are extensively used in tissue engineering and regenerative medicine due to their ability to proliferate, differentiate, and modulate the immune environment. Controlling MSC behavior is critical for advances in the field. Decellularised extracellular matrix (dECM) can maintain MSC properties in culture, increase their proliferation rate and capacity, and enhance their stimulated differentiation. Substrate stiffness is another key driver of cell function, and previous reports have primarily looked at dECM deposition and function on stiff substrates such as glass. Herein, we produce dECM on substrates of varying stiffness to create tailored environments that enhance desired MSC properties such as proliferation and differentiation. Additionally, we complete mechanistic studies including quantitative mass spec of the ECM to understand the biological function.

Osteosarcoma growth on trabecular bone mimicking structures manufactured via laser direct write

 This paper describes the direct laser write of a photocurable acrylate-based PolyHIPE (High Internal Phase Emulsion) to produce scaffolds with both macro- and microporosity, and the use of these scaffolds in osteosarcoma-based 3D cell culture. The macroporosity was introduced via the application of stereolithography to produce a classical “woodpile” structure with struts having an approximate diameter of 200 μm and pores were typically around 500 μm in diameter. The PolyHIPE retained its microporosity after stereolithographic manufacture, with a range of pore sizes typically between 10 and 60 μm (with most pores between 20 and 30 μm). The resulting scaffolds were suitable substrates for further modification using acrylic acid plasma polymerisation. This scaffold was used as a structural mimic of the trabecular bone and in vitro determination of biocompatibility using cultured bone cells (MG63) demonstrated that cells were able to colonise all materials tested, with evidence that acrylic acid plasma polymerisation improved biocompatibility in the long term. The osteosarcoma cell culture on the 3D printed scaffold exhibits different growth behaviour than observed on tissue culture plastic or a flat disk of the porous material; tumour spheroids are observed on parts of the scaffolds. The growth of these spheroids indicates that the osteosarcoma behave more akin to in vivo in this 3D mimic of trabecular bone. It was concluded that PolyHIPEs represent versatile biomaterial systems with considerable potential for the manufacture of complex devices or scaffolds for regenerative medicine. In particular, the possibility to readily mimic the hierarchical structure of native tissue enables opportunities to build in vitro models closely resembling tumour tissue.

Pre-clinical evaluation of advanced nerve guide conduits using a novel 3D in vitro testing model.

Autografts are the current gold standard for large peripheral nerve defects in clinics despite the frequently occurring side effects like donor site morbidity. Hollow nerve guidance conduits (NGC) are proposed alternatives to autografts, but failed to bridge gaps exceeding 3 cm in humans. Internal NGC guidance cues like microfibres are believed to enhance hollow NGCs by giving additional physical support for directed regeneration of Schwann cells and axons. In this study, we report a new 3D in vitro model that allows the evaluation of different intraluminal fibre scaffolds inside a complete NGC. The performance of electrospun polycaprolactone (PCL) microfibres inside 5 mm long polyethylene glycol (PEG) conduits were investigated in neuronal cell and dorsal root ganglion (DRG) cultures in vitro. Z-stack confocal microscopy revealed the aligned orientation of neuronal cells along the fibres throughout the whole NGC length and depth. The number of living cells in the centre of the scaffold was not significantly different to the tissue culture plastic (TCP) control. For ex vivo analysis, DRGs were placed on top of fibre-filled NGCs to simulate the proximal nerve stump. In 21 days of culture, Schwann cells and axons infiltrated the conduits along the microfibres with 2.2 ± 0.37 mm and 2.1 ± 0.33 mm, respectively. We conclude that this in vitro model can help define internal NGC scaffolds in the future by comparing different fibre materials, composites and dimensions in one setup prior to animal testing.

How to Keep Myofibroblasts under Control: Culture of Mouse Skin Fibroblasts on Soft Substrates

During the physiological healing of skin wounds, fibroblasts recruited from the uninjured adjacent dermis and deeper subcutaneous fascia layers are transiently activated into myofibroblasts to first secrete and then contract collagen-rich extracellular matrix into a mechanically resistant scar. Scar tissue restores skin integrity after damage but comes at the expense of poor esthetics and loss of tissue function. Stiff scar matrix also mechanically activates various precursor cells into myofibroblasts in a positive feedback loop. Persistent myofibroblast activation results in pathologic accumulation of fibrous collagen and hypertrophic scarring, called fibrosis. Consequently, the mechanisms of fibroblast-to-myofibroblast activation and persistence are studied to develop antifibrotic and prohealing treatments. Mechanistic understanding often starts in a plastic cell culture dish. This can be problematic because contact of fibroblasts with tissue culture plastic or glass surfaces invariably generates myofibroblast phenotypes in standard culture. We describe a straight-forward method to produce soft cell culture surfaces for fibroblast isolation and continued culture and highlight key advantages and limitations of the approach. Adding a layer of elastic silicone polymer tunable to the softness of normal skin and the stiffness of pathologic scars allows to control mechanical fibroblast activation while preserving the simplicity of conventional 2-dimensional cell culture.

Quantifying and Controlling the Proteolytic Degradation of Cell Adhesion Peptides.

Peptides are widely used within biomaterials to improve cell adhesion, incorporate bioactive ligands, and enable cell-mediated degradation of the matrix. While many of the peptides incorporated into biomaterials are intended to be present throughout the life of the material, their stability is not typically quantified during culture. In this work, we designed a series of peptide libraries containing four different N-terminal peptide functionalizations and three C-terminal functionalizations to better understand how simple modifications can be used to reduce the nonspecific degradation of peptides. We tested these libraries with three cell types commonly used in biomaterials research, including mesenchymal stem/stromal cells (hMSCs), endothelial cells, and macrophages, and quantified how these cell types nonspecifically degraded peptides as a function of terminal amino acid and chemistry. We found that peptides in solution which contained N-terminal amines were almost entirely degraded by 48 h, irrespective of the terminal amino acid, and that degradation occurred even at high peptide concentrations. Peptides with C-terminal carboxylic acids also had significant degradation when cultured with the cells. We found that simple modifications to the termini could significantly reduce or completely abolish nonspecific degradation when soluble peptides were added to cells cultured on tissue culture plastic or within hydrogel matrices, and that functionalizations which mimicked peptide conjugations to hydrogel matrices significantly slowed nonspecific degradation. We also found that there were minimal differences in peptide degradation across cell donors and that sequences mimicking different peptides commonly used to functionalize biomaterials all had significant nonspecific degradation. Finally, we saw that there was a positive trend between RGD stability and hMSC spreading within hydrogels, indicating that improving the stability of peptides within biomaterial matrices may improve the performance of engineered matrices.

Macrophage variance: investigating how macrophage origin influences responses to soluble and physical cues with immortalized vs. primary cells in 2D and 3D culture

Macrophages are phagocytic innate immune cells capable of phenotypical switching in response to the local microenvironment. Studies often use either primary macrophages or immortalized cell lines for hypothesis testing, therapeutic assessment, and biomaterial evaluation without carefully considering the potential effects of cell source and tissue of origin, which strongly influence macrophage response. Surprisingly, limited information is available about how, under similar stimuli, immortalized cell lines and primary cells respond in both phenotypical and functional changes. To address this need, in this work, we cultured immortalized macrophage cell lines derived from different origins (i.e., blood, lung, peritoneal) to understand and compare macrophage phenotypical responses, including polarization and plasticity, morphological changes, and phagocytic functionalities, as well as compared primary macrophages extracted from peritoneal and bone marrow to their immortalized cell line counterparts. We found significant differences in baseline expression of different markers (e.g., CD86, MHCII, CD206, and EGR2) amongst different cell lines, which further influence both polarization and repolarization of the cells, in addition to their phagocytic functionality. Additionally, we observed that, while RAW 264.7 cells behave similarly to the primary bone marrow-derived macrophages, there are noticeable phenotypical and functional differences in cell line (IC-21) and primary peritoneal macrophages, highlighting tissue-specific differences in macrophage response amongst cell lines and primary cells. Moving to three-dimensional (3D) culture in well-defined biomaterials, blood-derived primary and cell line macrophages were encapsulated within hydrogel-based synthetic extracellular matrices and their polarization profiles and cell morphologies were compared. Macrophages exhibited less pronounced polarization during 3D culture in these compliant, soft materials compared to two-dimensional (2D) culture on rigid, tissue culture plastic plates. Overall, our findings highlight origin-specific differences in macrophage response, and therefore, careful considerations must be made to identify the appropriate cell source for the application of interest.

Development of alginate-collagen interpenetrating network for osteoarthritic cartilage by in situ softening

This study presents an alginate-collagen interpenetrating network (IPN) matrix of incorporating collagen fibrils into an alginate hydrogel by physical mixing and controlled gelation. The resulting matrix closely mimics the physiological and pathological stiffness range of the chondrocyte pericellular matrix (PCM). Chondrocytes were cultured within three-dimensional (3D) alginate-collagen IPN matrices with varying stiffness, namely Firm, Medium, and Soft. Alginate lyase was introduced to study the effects of the changes in stiffness of the Firm on chondrocyte response by in situ softening. The developed alginate-collagen IPN matrix displayed good cell-biocompatibility. Compared with stiffer tissue culture plastic (TCP), chondrocytes grown within Firm displayed a stabilized differentiated phenotype characterized by higher expression levels of aggrecan, collagen II, and SOX-9. Moreover, the developed alginate-collagen IPN matrix exhibited a gradually increased percentage of propidium iodide (PI)-positive dead cells with decreasing stiffness. Softer matrices directed cells towards higher proliferation rates and spherical morphologies while stimulating chondrocyte cluster formation. Furthermore, reducing Firm stiffness by in situ softening decreased aggrecan expression, contributing to matrix degradation similar to that seen in osteoarthritis (OA). Hence, the 3D alginate-collagen IPN constructs hold significant potential for in vitro replicating PCM stiffness changes observed in OA cartilage.

A novel, microfluidic high-throughput single-cell encapsulation of human bone marrow mesenchymal stromal cells

The efficacy of stem-cell therapy depends on the ability of the transplanted cells to escape early immunological reactions and to be retained at the site of transplantation. The use of tissue engineering scaffolds or injectable biomaterials as carriers has been proposed, but they still present limitations linked to a reliable manufacturing process, surgical practice and clinical outcomes. Alginate microbeads are potential candidates for the encapsulation of mesenchymal stromal cells with the aim of providing a delivery carrier suitable for minimally-invasive and scaffold-free transplantation, tissue-adhesive properties and protection from the immune response. However, the formation of stable microbeads relies on the cross-linking of alginate with divalent calcium ions at concentrations that are toxic for the cells, making control over the beads’ size and a single-cell encapsulation unreliable. The present work demonstrates the efficiency of an innovative, high throughput, and reproducible microfluidic system to produce single-cell, calcium-free alginate coatings of human mesenchymal stromal cells. Among the various conditions tested, visible light and confocal microscopy following staining of the cell nuclei by DAPI showed that the microfluidic system yielded an optimal single-cell encapsulation of 2000 cells/min in 2% w/v alginate microcapsules of reproducible morphology and an average size of 28.2 ± 3.7 µm. The adhesive properties of the alginate microcapsules, the viability of the encapsulated cells and their ability to escape the alginate microcapsule were demonstrated by the relatively rapid adherence of the beads onto tissue culture plastic and the cells’ ability to gradually disrupt the microcapsule shell after 24 h and proliferate. To mimic the early inflammatory response upon transplantation, the encapsulated cells were exposed to proliferating macrophages at different cell seeding densities for up to 2 days and the protection effect of the microcapsule on the cells assessed by time-lapse microscopy showing a shielding effect for up to 48 h. This work underscores the potential of microfluidic systems to precisely encapsulate cells by good manufacturing practice standards while favouring cell retention on substrates, viability and proliferation upon transplantation.Graphical

Abstract 6896: Biomimetic hydrogels at physiological stiffness reprogram patient derived melanoma cells

Abstract Melanoma is a uniquely difficult cancer to treat due to complex tumor heterogeneity and resistance, where upon dissemination, survival drops to less than 17%. Drug resistance has arisen for the current standard of care and combinatorial therapies, expediting the need for new efficacious agents. The lack of physiologically relevant preclinical models has impeded the development of these therapeutics. Potential melanoma drugs are typically assayed using cell lines on tissue culture plastic, then tested for in vivo efficacy and side effects in animals. This paradigm is inherently unsuitable for the generation of effective therapies as typical cell culture platforms fail to replicate the complex microenvironments known to play critical roles in tumor pathology and rodent models are prohibitively expensive for optimizing novel and combination therapies. Thus, our goal is to synthesize tissue-engineered melanoma models using biomimetic polymers that recapitulate patient tumor characteristics to assess combination and novel therapies that attenuate resistance and disrupt metastatic processes. In this study, patient melanoma cells, which were unable to recapitulate drug responses on traditional cell culture platforms, were cultured in a controlled spatial and temporal manner on polyacrylamide hydrogels. The hydrogel scaffolds feature stiffnesses spanning that of physiological tissue, with microcontact printed human fibronectin for biomimetic protein presentation to create a microtumor array. Cells cultured on the hydrogel showed a 2.5-fold increase in expression of the cancer stem cell biomarkers, CD271 and ABCB5, which play a key role in melanoma survival and recurrence, compared to cells cultured on plastic or glass substrates. Further study identified BRAF mutant, drug resistant patient cells, regained resistance to standard of care targeted therapies, trametinib and dabrafenib. Through hydrogel microarrays featuring physiological similarities, the technology has enabled the exploration of heterogeneous cell populations with novel and combinatorial therapeutics. Citation Format: Yi L. Liu, Justyna Gleba, Chantal Kopecky, Matthew Pawlush, John A. Copland, Kristopher A. Kilian. Biomimetic hydrogels at physiological stiffness reprogram patient derived melanoma cells [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 6896.

Abstract 6971: The impact of lecithin retinol acyltransferase in squamous cell carcinoma: Tissue formation, cell mechanics, and gene transcription

Abstract Squamous cell carcinoma, along with several other cancers, has been found to lack expression of lecithin retinol acyltransferase (LRAT), a protein which catalyzes retinol esterification and thereby mediates retinoic acid biosynthesis. When expression of LRAT was reintroduced in squamous cell carcinoma, the protein promoted cell differentiation in addition to retinoid status normalization—whether this effect was dependent on the known enzymatic activity of LRAT in retinol esterification, versus another function, has not yet been established. Cell elasticity differences have also been reported between squamous cell carcinoma and normal keratinocytes. In this study, the role of LRAT expression and activity was evaluated in human squamous cell carcinoma cell line SCC13. LRAT was integrated into the genome of SCC13 via retroviral transduction, both as wild-type LRAT and LRAT with a cysteine-to-serine mutation at the active site for retinol esterification (C161-S). In these transformed cell lines, LRAT promoted formation of a cohesive sheet of tissue which remained intact after its removal from the tissue culture plastic surface, as evaluated at two weeks post-confluence. SCC13 alone produced tissue which easily fragmented during this scraping assay. In an evaluation of cell elasticity with shear modulation force microscopy, relative cell modulus measurements of pre-confluent SCC13 with LRAT expression were found to be significantly greater and consistent with the cell modulus of human keratinocytes (DO33). These effects persisted with mutation of the retinol esterification active site, suggesting that LRAT possesses an additional function which has yet to be described. Variation in transcription levels of multiple genes—urokinase-type plasminogen activator, plasminogen activator inhibitor 1, tissue inhibitor of metalloproteinases 1, and kallikrein 5—was also found based on LRAT expression and level of confluence. These findings suggest that the presence of LRAT influences tissue formation, cell elasticity, and gene transcription in SCC13. Citation Format: Emily Peterson, Kuan-Che Feng, Jay Gao, Miriam Rafailovich, Marcia Simon. The impact of lecithin retinol acyltransferase in squamous cell carcinoma: Tissue formation, cell mechanics, and gene transcription [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 6971.

Integrated Experimental and Mathematical Exploration of Modular Tissue Cultures for Developmental Engineering.

Developmental engineering (DE) involves culturing various cells on modular scaffolds (MSs), yielding modular tissues (MTs) assembled into three-dimensional (3D) tissues, mimicking developmental biology. This study employs an integrated approach, merging experimental and mathematical methods to investigate the biological processes in MT cultivation and assembly. Human dermal fibroblasts (HDFs) were cultured on tissue culture plastics, poly(lactic acid) (PLA) discs with regular open structures, or spherical poly(methyl methacrylate) (PMMA) MSs, respectively. Notably, HDFs exhibited flattened spindle shapes when adhered to solid surfaces, and complex 3D structures when migrating into the structured voids of PLA discs or interstitial spaces between aggregated PMMA MSs, showcasing coordinated colonization of porous scaffolds. Empirical investigations led to power law models simulating density-dependent cell growth on solid surfaces or voids. Concurrently, a modified diffusion model was applied to simulate oxygen diffusion within tissues cultured on solid surfaces or porous structures. These mathematical models were subsequently combined to explore the influences of initial cell seeding density, culture duration, and oxygen diffusion on MT cultivation and assembly. The findings underscored the intricate interplay of factors influencing MT design for tissue assembly. The integrated approach provides insights into mechanistic aspects, informing bioprocess design for manufacturing MTs and 3D tissues in DE.

Substrate elasticity does not impact DNA methylation changes during differentiation of pluripotent stem cells

Background aimsSubstrate elasticity may direct cell-fate decisions of stem cells. However, it is largely unclear how matrix stiffness affects the differentiation of induced pluripotent stem cells (iPSCs) and whether this is also reflected by epigenetic modifications. MethodsWe cultured iPSCs on tissue culture plastic (TCP) and polydimethylsiloxane (PDMS) with different Young's modulus (0.2 kPa, 16 kPa or 64 kPa) to investigate the sequel on growth and differentiation toward endoderm, mesoderm and ectoderm. ResultsImmunofluorescence and gene expression of canonical differentiation markers were hardly affected by the substrates. Notably, when we analyzed DNA methylation profiles of undifferentiated iPSCs or after three-lineage differentiation, we did not see any significant differences on the three different PDMS elasticities. Only when we compared DNA methylation profiles on PDMS-substrates versus TCP we did observe epigenetic differences, particularly on mesodermal differentiation. ConclusionsStiffness of PDMS substrates did not affect directed differentiation of iPSCs, whereas the moderate epigenetic differences on TCP might also be attributed to other chemical parameters.

The Effect of Substrate Properties on Cellular Behavior and Nanoparticle Uptake in Human Fibroblasts and Epithelial Cells.

The delivery of nanomedicines into cells holds enormous therapeutic potential; however little is known regarding how the extracellular matrix (ECM) can influence cell-nanoparticle (NP) interactions. Changes in ECM organization and composition occur in several pathophysiological states, including fibrosis and tumorigenesis, and may contribute to disease progression. We show that the physical characteristics of cellular substrates, that more closely resemble the ECM in vivo, can influence cell behavior and the subsequent uptake of NPs. Electrospinning was used to create two different substrates made of soft polyurethane (PU) with aligned and non-aligned nanofibers to recapitulate the ECM in two different states. To investigate the impact of cell-substrate interaction, A549 lung epithelial cells and MRC-5 lung fibroblasts were cultured on soft PU membranes with different alignments and compared against stiff tissue culture plastic (TCP)/glass. Both cell types could attach and grow on both PU membranes with no signs of cytotoxicity but with increased cytokine release compared with cells on the TCP. The uptake of silica NPs increased more than three-fold in fibroblasts but not in epithelial cells cultured on both membranes. This study demonstrates that cell-matrix interaction is substrate and cell-type dependent and highlights the importance of considering the ECM and tissue mechanical properties when designing NPs for effective cell targeting and treatment.

P035 3D bioprinting of gelatin derivatives: towards novel small intestinal in vitro models

Abstract Background Despite significant progress achieved in the field of inflammatory bowel disease research, the precise cause of the disease has yet to be elucidated. Intestinal in vitro models can provide a fast and inexpensive alternative for in vivo studies. Nonetheless, many in vitro models lack the crypt or crypt-villus architecture as seen in the large and small intestine respectively and therefore fail to mimic the complexity of the gut. In this study, we aim to improve the physiology of small intestinal in vitro models by the development of hydrogels that mirror the villi and crypts of the digestive tract. Methods This study focused on the development of gelatin-methacryloyl-aminoethyl-methacrylate (gel-MA-AEMA)-, and gelatin-methacryloyl-norbornene (gel-MA-NB)-based biomaterial inks to fabricate 3D constructs, mimicking villi or a combination of villi and crypts, with digital light processing. The constructs were mechanically and morphologically evaluated with parallel plate rheology and cryo-scanning electron microscopy respectively. To assess the biocompatibility of the 3D constructs, a Caco-2/HT29-MTX co-culture in a 9:1 ratio was maintained for 21 days and confluency was confirmed with immunofluorescence. Gene expression, transepithelial electrical resistance (TEER) and paracellular permeability of the cells cultured on the constructs were compared to cells cultured on flat gel-MA-AEMA and gel-MA-NB hydrogels, a collagen type I coating or uncoated tissue culture plastic. Results Both gel-MA-AEMA and gel-MA-NB hydrogels exhibited physiologically relevant stiffness (1.9 ± 0.63 kPa and 1.64 ± 0.63 kPa respectively), but only the gel-MA-AEMA based biomaterial ink could be successfully utilized for printing constructs with villi and crypts. On all construct designs, confluency was reached and paracellular permeability of small sized marker molecules in combination with TEER measurements suggested the formation of a functional barrier over time, which was further confirmed by immunofluorescence and increased gene expression of tight junction proteins, occludin and ZO-1. The gene expression of enterocyte differentiation markers, villin-1, sucrase isomaltase and alkaline phosphatase, suggested the superior differentiation of Caco-2 cells on the ‘only villi’ and ‘villi and crypts’ constructs compared to flat hydrogels, collagen type I coating or uncoated tissue culture plastic. Conclusion Although both hydrogels promoted functional barrier formation and enterocyte differentiation, gel-MA-AEMA was more suited for DLP than gel-MA-NB. In addition, culturing intestinal epithelial cells on the 3D constructs ameliorated cell differentiation compared to conventional 2D setups.

A Protein-Adsorbent Hydrogel with Tunable Stiffness for Tissue Culture Demonstrates Matrix-Dependent Stiffness Responses.

Although tissue culture plastic has been widely employed for cell culture, the rigidity of plastic is not physiologic. Softer hydrogels used to culture cells have not been widely adopted in part because coupling chemistries are required to covalently capture extracellular matrix (ECM) proteins and support cell adhesion. To create an in vitro system with tunable stiffnesses that readily adsorbs ECM proteins for cell culture, we present a novel hydrophobic hydrogel system via chemically converting hydroxyl residues on the dextran backbone to methacrylate groups, thereby transforming non-protein adhesive, hydrophilic dextran to highly protein adsorbent substrates. Increasing methacrylate functionality increases the hydrophobicity in the resulting hydrogels and enhances ECM protein adsorption without additional chemical reactions. These hydrophobic hydrogels permit facile and tunable modulation of substrate stiffness independent of hydrophobicity or ECM coatings. Using this approach, we show that substrate stiffness and ECM adsorption work together to affect cell morphology and proliferation, but the strengths of these effects vary in different cell types. Furthermore, we reveal that stiffness mediated differentiation of dermal fibroblasts into myofibroblasts is modulated by the substrate ECM. Our material system demonstrates remarkable simplicity and flexibility to tune ECM coatings and substrate stiffness and study their effects on cell function.

Effect of exogenous genistein on osteogenic differentiation of adipose-derived mesenchymal stem cells in laying hens

Previous literature revealed that genistein might play a preventive role in osteoporosis. Therefore, we aimed to evaluate the effect of genistein on the osteogenic potency of laying hens’ adipose-derived stem cells (LHASCs). The viability of LHASCs after isolation was investigated on tissue culture plastic (TCP) under exposure to genistein up to 50 μg/mL by MTT assay. Our preliminary result revealed that LHASCs cultured under genistein exposure up to 20 μg/mL are feasible. Then, we evaluated the osteogenic induction of LHASCs under exposure to 0, 10, and 20 μg/mL genistein. The Alizarin Red staining confirmed the calcium deposition. Our findings showed that osteogenic differentiation under exposure to 20 μg/mL genistein led to higher ALP activity and more calcium content. We then tried to see the probable additive effect of the genistein-plus Poly-L-lactic acid (PLLA) scaffold on the cell viability and osteogenic capacity of LHASCs. For this, cells were cultured on a PLLA scaffold and exposed to 20 μg/mL genistein. Cell growth rate, as indicated by the MTT assay, revealed no differences between the groups. LHASCs cultured on a genistein-plus PLLA scaffold showed higher ALP activity and more calcium content. The expressions of Osteocalcin, COL1A2, ALP, and Runx2 genes were increased in the genistein-plus PLLA group as compared with PLLA and TCP groups. Adequate proliferation rates and higher expression of osteogenic markers provide genistein as a suitable substrate to support the proliferation and differentiation of LHASCs. Genistein supports osteogenic induction as a further positive effect if such a PLLA scaffold is available.

HUMAN MONOCYTES AND MESENCHYMAL STEM/STROMAL CELLS CO-CULTURED IN FIBRIN HAVE A PRO-REPAIR PHENOTYPE THAT INFLUENCES CHONDROCYTE ACTIVITY

Tissue repair is believed to rely on tissue-resident progenitor cell populations proliferating, migrating, and undergoing differentiation at the site of injury. During these processes, the crosstalk between mesenchymal stromal/stem cells (MSCs) and macrophages has been shown to play a pivotal role. However, the influence of extracellular matrix (ECM) remodelling in this crosstalk, remains elusive.Human MSCs cultured on tissue culture plastic (TCP) and encased within fibrin in vitro were treated with/without TNFα and IFNγ. Human monocytes were cocultured with untreated/pretreated MSCs on TCP or within fibrin. After seven days, the conditioned media (CM) were collected. Human chondrocytes were exposed to CM in a migration assay. The impact of TGFβ was assessed by adding an inhibitor (TGFβRi). Cell activity was assessed using RT-qPCR and XL-protein-profiler-array.Previously, we demonstrated that culturing human MSCs within 3D-environments significantly enhances their immunoregulatory activity in response to pro-inflammatory stimuli. In this study, monocytes were co-cultured with MSCs within fibrin, acquiring a distinct M2-like repair macrophage phenotype in contrast to TCP co-cultures. MSC/macrophage CM characterization using a protein array demonstrated differences in release of several factors, including chemokines, growth factors and ECM components. Chondrocyte migration was significantly reduced in CM from untreated MSC/monocytes co-cultures in fibrin compared to CM of untreated MSCs/monocytes on TCP. This impact on migration was not seen with chondrocytes cultured in CM of monocytes co-cultured with pretreated MSCs in fibrin. The CM of monocytes co-cultured with pretreated MSCs in fibrin up-regulates COL2A1 and SOX9 compared to TCP. Chondrogenesis and migration were TGFβ dependent.MSC/macrophage crosstalk and responsiveness to cytokines are influenced by the ECM environment, which subsequently impacts tissue-resident cell migration and chondrogenesis. The direct effects of ECM on MSC/macrophage secretory phenotype is complemented by the dynamic ECM binding and release of growth factors such as TGFβ.

SENESCENCE OR APOPTOSIS: CHONDROCYTE RESPONSE TO INFLAMMATION IN VITRO IS DEPENDENT ON ITS DIMENSIONAL ENVIRONMENT

Cell culture on tissue culture plastic (TCP) is widely used across biomedical research to understand the in vivo environment of a targeted biological system. However, growing evidence indicates that the characteristics of cells investigated in this way differ substantially from their characteristics in the human body. The limitations of TCP monolayer cell cultures are especially relevant for chondrocytes, the cell population responsible for producing cartilage matrix, because their zonal organization in hyaline cartilage is not preserved in a flattened monolayer assay. Here, we contrast the response of primary human chondrocytes to inflammatory cytokines, tumor necrosis factor-alpha and interferon-gamma, via transcriptional, translational, and histological profiling, when grown either on TCP or within a 3D cell pellet (scaffold-less). We focus on anti-apoptotic (Bcl2), pro-apoptotic (Bax, Mff, Fis1), and senescent (MMP13, MMP1, PCNA, p16, p21) markers. We find that the 3D environment of the chondrocyte has a profound effect on the behavior and fate of the cell; in TCP monolayer cultures, chondrocytes become anti-apoptotic and undergo senescence in response to inflammatory cytokines, whereas in 3D cell pellet cultures, they exhibit a pro-apoptotic response. Our findings demonstrate that chondrocyte culture environment plays a pivotal role in cell behavior, which has important implications for the clinical applicability of in vitro research of cartilage repair. Although there are practical advantages to 2D cell cultures, our data suggest researchers should be cautious when drawing conclusions if they intend to extrapolate findings to in vivo phenomena. Our data demonstrates opposing chondrocyte responses in relation to apoptosis and senescence, which appear to be solely reliant on the environment of the culture system. This biological observation highlights that proper experimental design is crucial to increase the clinical utility of cartilage repair experiments and streamline their translation to therapy development.

Using diffusion tensor imaging to depict myocardial changes after matured pluripotent stem cell-derived cardiomyocyte transplantation

BackgroundNovel treatment strategies are needed to improve the structure and function of the myocardium post-infarction. In vitro-matured pluripotent stem cell-derived cardiomyocytes (PSC-CMs) have been shown to be a promising regenerative strategy. We hypothesized that mature PSC-CMs will have anisotropic structure and improved cell alignment when compared to immature PSC-CMs using cardiovascular magnetic resonance (CMR) in a guinea pig model of cardiac injury. MethodsGuinea pigs (n = 16) were cryoinjured on day −10, followed by transplantation of either 108 polydimethylsiloxane (PDMS)-matured PSC-CMs (n = 6) or 108 immature tissue culture plastic (TCP)-generated PSC-CMs (n = 6) on day 0. Vehicle (sham-treated) subjects were injected with a pro-survival cocktail devoid of cells (n = 4), while healthy controls (n = 4) did not undergo cryoinjury or treatment. Animals were sacrificed on either day +14 or day +28 post-transplantation. Animals were imaged ex vivo on a 7T Bruker MRI. A 3D diffusion tensor imaging (DTI) sequence was used to quantify structure via fractional anisotropy (FA), mean diffusivity (MD), and myocyte alignment measured by the standard deviation of the transverse angle (TA). ResultsMD and FA of mature PDMS grafts demonstrated anisotropy was not significantly different than the healthy control hearts (MD = 1.1 ± 0.12 × 10−3 mm2/s vs 0.93 ± 0.01 × 10−3 mm2/s, p = 0.4 and FA = 0.22 ± 0.05 vs 0.26 ± 0.001, p = 0.5). Immature TCP grafts exhibited significantly higher MD than the healthy control (1.3 ± 0.08 × 10−3 mm2/s, p < 0.05) and significantly lower FA than the control (0.12 ± 0.02, p < 0.05) but were not different from mature PDMS grafts in this small cohort. TA of healthy controls showed low variability and was not significantly different than mature PDMS grafts (p = 0.4) while immature TCP grafts were significantly different (p < 0.001). DTI parameters of mature graft tissue trended toward that of the healthy myocardium, indicating the grafted cardiomyocytes may have a similar phenotype to healthy tissue. Contrast-enhanced magnetic resonance images corresponded well to histological staining, demonstrating a non-invasive method of localizing the repopulated cardiomyocytes within the scar. ConclusionsThe DTI measures within graft tissue were indicative of anisotropic structure and showed greater myocyte organization compared to the scarred territory. These findings show that MRI is a valuable tool to assess the structural impacts of regenerative therapies.