Tissue Culture Plastic Surfaces Research Articles

How to Keep Myofibroblasts under Control: Culture of Mouse Skin Fibroblasts on Soft Substrates

During the physiological healing of skin wounds, fibroblasts recruited from the uninjured adjacent dermis and deeper subcutaneous fascia layers are transiently activated into myofibroblasts to first secrete and then contract collagen-rich extracellular matrix into a mechanically resistant scar. Scar tissue restores skin integrity after damage but comes at the expense of poor esthetics and loss of tissue function. Stiff scar matrix also mechanically activates various precursor cells into myofibroblasts in a positive feedback loop. Persistent myofibroblast activation results in pathologic accumulation of fibrous collagen and hypertrophic scarring, called fibrosis. Consequently, the mechanisms of fibroblast-to-myofibroblast activation and persistence are studied to develop antifibrotic and prohealing treatments. Mechanistic understanding often starts in a plastic cell culture dish. This can be problematic because contact of fibroblasts with tissue culture plastic or glass surfaces invariably generates myofibroblast phenotypes in standard culture. We describe a straight-forward method to produce soft cell culture surfaces for fibroblast isolation and continued culture and highlight key advantages and limitations of the approach. Adding a layer of elastic silicone polymer tunable to the softness of normal skin and the stiffness of pathologic scars allows to control mechanical fibroblast activation while preserving the simplicity of conventional 2-dimensional cell culture.

Injectable biodegradable microcarriers for iPSC expansion and cardiomyocyte differentiation.

Cell therapy is a potential novel treatment for cardiac regeneration and numerous studies have attempted to transplant cells to regenerate the myocardium lost during myocardial infarction. To date, only minimal improvements to cardiac function have been reported. This is likely to be the result of low cell retention and survival following transplantation. This study aimed to improve the delivery and engraftment of viable cells by using an injectable microcarrier that provides an implantable, biodegradable substrate for attachment and growth of cardiomyocytes derived from induced pluripotent stem cells (iPSC). We describe the fabrication and characterisation of Thermally Induced Phase Separation (TIPS) microcarriers and their surface modification to enable iPSC-derived cardiomyocyte attachment in xeno-free conditions is described. The selected formulation resulted in iPSC attachment, expansion, and retention of pluripotent phenotype. Differentiation of iPSC into cardiomyocytes on the microcarriers is investigated in comparison with culture on 2D tissue culture plastic surfaces. Microcarrier culture is shown to support culture of a mature cardiomyocyte phenotype, be compatible with injectable delivery, and reduce anoikis. The findings from this study demonstrate that TIPS microcarriers provide a supporting matrix for culturing iPSC and iPSC-derived cardiomyocytes in vitro and are suitable as an injectable cell-substrate for cardiac regeneration.

Abstract 6971: The impact of lecithin retinol acyltransferase in squamous cell carcinoma: Tissue formation, cell mechanics, and gene transcription

Abstract Squamous cell carcinoma, along with several other cancers, has been found to lack expression of lecithin retinol acyltransferase (LRAT), a protein which catalyzes retinol esterification and thereby mediates retinoic acid biosynthesis. When expression of LRAT was reintroduced in squamous cell carcinoma, the protein promoted cell differentiation in addition to retinoid status normalization—whether this effect was dependent on the known enzymatic activity of LRAT in retinol esterification, versus another function, has not yet been established. Cell elasticity differences have also been reported between squamous cell carcinoma and normal keratinocytes. In this study, the role of LRAT expression and activity was evaluated in human squamous cell carcinoma cell line SCC13. LRAT was integrated into the genome of SCC13 via retroviral transduction, both as wild-type LRAT and LRAT with a cysteine-to-serine mutation at the active site for retinol esterification (C161-S). In these transformed cell lines, LRAT promoted formation of a cohesive sheet of tissue which remained intact after its removal from the tissue culture plastic surface, as evaluated at two weeks post-confluence. SCC13 alone produced tissue which easily fragmented during this scraping assay. In an evaluation of cell elasticity with shear modulation force microscopy, relative cell modulus measurements of pre-confluent SCC13 with LRAT expression were found to be significantly greater and consistent with the cell modulus of human keratinocytes (DO33). These effects persisted with mutation of the retinol esterification active site, suggesting that LRAT possesses an additional function which has yet to be described. Variation in transcription levels of multiple genes—urokinase-type plasminogen activator, plasminogen activator inhibitor 1, tissue inhibitor of metalloproteinases 1, and kallikrein 5—was also found based on LRAT expression and level of confluence. These findings suggest that the presence of LRAT influences tissue formation, cell elasticity, and gene transcription in SCC13. Citation Format: Emily Peterson, Kuan-Che Feng, Jay Gao, Miriam Rafailovich, Marcia Simon. The impact of lecithin retinol acyltransferase in squamous cell carcinoma: Tissue formation, cell mechanics, and gene transcription [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 6971.

TiO2 Nanostructures That Reduce the Infectivity of Human Respiratory Viruses Including SARS-CoV-2.

The rapid emergence and global spread of the COVID-19 causing Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) and its subsequent mutated strains has caused unprecedented health, economic, and social devastation. Respiratory viruses such as SARS-CoV-2 can be transmitted through both direct and indirect channels, including aerosol respiratory droplets, contamination of inanimate surfaces (fomites), and direct person-to-person contact. Current methods of virus inactivation on surfaces include chemicals and biocides, and while effective, continuous and repetitive cleaning of all surfaces is not always viable. Recent work in the field of biomaterials engineering has established the antibacterial effects of hydrothermally synthesized TiO2 nanostructured surfaces against both Gram-negative and -positive bacteria. The current study investigates the effectiveness of said TiO2 nanostructured surfaces against two enveloped human coronaviruses, SARS-CoV-2 and HCoV-NL63, and nonenveloped HRV-16 for surface-based inactivation. Results show that structured surfaces reduced infectious viral loads of SARS-CoV-2 (5 log), HCoV-NL63 (3 log), and HRV-16 (4 log) after 5 h, compared to nonstructured and tissue culture plastic control surfaces. Interestingly, infectious virus remained present on control tissue culture plastic after 7 h exposure. These encouraging results establish the potential use of nanostructured surfaces to reduce the transmission and spread of both enveloped and nonenveloped respiratory viruses, by reducing their infectious period on a surface. The dual antiviral and antibacterial properties of these surfaces support their potential application in a wide variety of settings such as hospitals and healthcare environments, public transport and community hubs.

Evaluation of different protocols for culturing mesenchymal stem cells derived from murine bone marrow

IntroductionCulturing bone marrow mesenchymal stem cells (BM-MSCs) is a key point in different fields of research, including tissue engineering and regenerative medicine and studies of the bone marrow microenvironment. However, isolating and expanding murine BM-MSCs in vitro has challenged researchers due to the low purity and yield of obtained cells. In this study, we aimed to evaluate five different protocols to culture murine BM-MSCs in vitro.MethodsAll protocols were based on the adhesion capacity of BM-MSCs to the tissue culture plastic surface and varied in the types of plate, culture media, serum, additional supplementation and initial cell density. Flow cytometry analysis was used to investigate lineage purity after expansion.ResultsThe expression of CD45 and CD11b was detected in the cultures generated according to all protocols, indicating low purity with the presence of hematopoietic cells and macrophages. The cellular growth rate and morphology varied between the cultures performed according to each protocol. Cells cultured according to protocol 5 (8 × 107cells/plate, Roswell Park Memorial Institute (RPMI) culture medium during first passage and then Iscove's Modified Delbecco's Medium (IMDM) culture medium, both supplemented with 9% fetal bovine serum, 9% horse serum, 12µM L-glutamine) presented the best performance, with a satisfactory growth rate and spindle-shape morphology.ConclusionOur results point out that the purity and satisfactory growth rate of murine BM-MSC cultures are not easily achieved and additional approaches must be tested for a proper cell expansion.

Culture Substrates for Improved Manufacture of Mesenchymal Stromal Cell Therapies.

Recent developments in mesenchymal stromal cell (MSC) therapies have increased the demand for tools to improve their manufacture, including the selection of optimal culture substrate materials. While many clinical manufacturers use planar tissue culture plastic (TCP) surfaces for MSC production, others have begun exploring the use of alternative culture substrates that present a variety of spatial, mechanical, and biochemical cues that influence cell expansion and resulting cell quality. In this review, the effects of culture and material properties distinct from traditional planar TCP surfaces on MSC proliferation, surface marker expression, and commonly used indications for therapeutic potency are examined. The different properties summarized include the use of alternative culture formats such as cellular aggregates or 3D scaffolds, as well as the effects of culture substrate stiffness and presentation of specific adhesive ligands and topographical cues. Specific substrate properties can be related to greater cell expansion and improvement in specific therapeutic functionalities, demonstrating the utility of culture materials in further improving the clinical-scale manufacture of highly secretory MSC products.

Hydrogel Culture Surface Stiffness Modulates Mesenchymal Stromal Cell Secretome and Alters Senescence.

Current cell culture surfaces used for the expansion and production of mesenchymal stromal cells (MSCs) are not optimized for the production of highly secretory and nonsenescent cells. In this study, we used poly (ethylene glycol) hydrogel substrates with tunable mechanical and biochemical properties to screen the effect of culture surfaces on pro-regenerative secretome by multiplex enzyme-linked immunosorbent assay, proliferation by PicoGreen DNA analysis, and senescence by senescence-associated β-galactosidase activity. We demonstrate that MSCs cultured on 30 kPa hydrogels, regardless of biochemical functionalization, broadly enhanced the secretion of immunomodulatory and regenerative factors versus stiffer 100 kPa or tissue culture plastic surfaces, but did not support robust proliferation. In contrast, culture on 100 kPa hydrogel surfaces promoted proliferation at a similar level and did not substantially alter the amount of secreted factors as compared with tissue culture plastic. Culture on integrin-engaging, cadherin-engaging, and hyaluronic acid-containing 30 kPa substrates enhanced MSC-conditioned media (CM) angiogenic activity in a human umbilical vein endothelial cell tube formation assay and human THP-1 monocyte chemoattraction in a transwell assay. However, 30 kPa substrate culture did not impact the myogenic activity of MSC CM in a C2C12 myoblast tube formation assay. Culture on selected 100 kPa surfaces enhanced CM angiogenic activity and monocyte chemotaxis, but not myogenic activity. Serial culture on 100 kPa RGD hydrogel surfaces significantly reduced senescence in MSCs versus tissue culture plastic, while maintaining the capacity of the cells to enhance their secretome in response to 30 kPa surfaces. Thus, hydrogel substrates that exhibit stiffness orders of magnitude lower than standard tissue culture plastic can serve as novel surfaces for the production of MSCs with an improved therapeutic secretory capacity and reduced senescence. Impact statement The success of mesenchymal stromal cell (MSC)-based therapies is dependent on the manufacture of a large number of cells with high therapeutic potency. Among the culture surfaces tested in this study, we demonstrate that substrate stiffness rather than biochemical functionalization predominantly guides changes in MSC proliferation and secretory capacity. We have identified substrate parameters to support MSC proliferation, enhance secretion of paracrine factors, and to reduce replicative senescence. By maximizing secretory capacity and reducing senescence through the choice of hydrogel culture materials, these findings have great potential to improve the large-scale production of therapeutic MSCs.

Extracellular matrix mimicking polycaprolactone-chitosan nanofibers promote stemness maintenance of mesenchymal stem cells via spheroid formation

The development of clinical applications has led to a perpetual increase in the demand for mesenchymal stem cells (MSCs). However, the ex vivo expansion of MSCs while maintaining their stemness and differentiation potential remains an immense challenge. MSCs require high cell density for their intercellular communication and specific physico-chemical cues from the surrounding environment for spheroid formation in order to maintain their stemness. Inadequacy of the traditional in vitro cell culture method (tissue culture plastic surface) to fulfill any of these special requirements is responsible for inducing the loss of stem cell properties of the MSCs over time. In this study, we propose that glucosaminoglycan (GAG) mimicking ultrafine nanofibers could support the spheroid culture for in vitro human MSC expansion. The geometrical and biochemical properties of nanofibers provide biomimicking cues to MSCs, as well as enhance cell-cell interactions and stimulate spheroid formation in MSCs, which subsequently result in increased cell proliferation, enhanced expression of stem cell markers and maintenance of their multilineage differentiation potential. Furthermore, close monitoring of the behavior of MSCs on nanofibers serves as the key to understand their mode of action in niche formation. Interestingly, GAG mimicking substrate stimulated MSCs for long-distance intercellular communication via ‘tunneling tubes’, their subsequent migration and niche formation. These kinds of cellular interactions over long distances have rarely been observed in MSCs to provide better insight for future studies on MSC niche. Furthermore, PCL-CHT nanofibers were observed to be as conducive to use as tissue culture polystyrene for stem cell expansion. Overall, these polymeric nanofibers provide a more relevant, convenient and more suitable substrate than the conventional monolayer culture for in vitro MSC expansion.

Cell derived extracellular matrix-rich biomimetic substrate supports podocyte proliferation, differentiation and maintenance of native phenotype.

Current technologies and available scaffold materials do not support long-term cell viability, differentiation and maintenance of podocytes, the ultra-specialized kidney resident cells that are responsible for the filtration of the blood. We developed a new platform which imitates the native kidney microenvironment by decellularizing fibroblasts grown on surfaces with macromolecular crowding. Human immortalized podocytes cultured on this platform displayed superior viability and metabolic activity up to 28 days compared to podocytes cultured on tissue culture plastic surfaces. The new platform displayed a softer surface and an abundance of growth factors and associated molecules. More importantly it enabled podocytes to display molecules responsible for their structure and function and a superior development of intercellular connections/interdigitations, consistent with maturation. The new platform can be used to study podocyte biology, test drug toxicity and determine whether sera from patients with podocytopathies are involved in the expression of glomerular pathology.

Cell adhesion and culture medium dependent changes in the high frequency mechanical vibration induced proliferation, osteogenesis, and intracellular organization of human adipose stem cells

High frequency (HF) mechanical vibration appears beneficial for in vitro osteogenesis of mesenchymal stem cells (MSCs). However, the current mechanobiological understanding of the method remains insufficient. We designed high-throughput stimulators to apply horizontal or vertical high magnitude HF (HMHF; 2.5 Gpeak, 100 Hz) vibration on human adipose stem cells (hASCs). We analyzed proliferation, alkaline phosphatase (ALP) activity, mineralization, and effects on the actin cytoskeleton and nuclei using immunocytochemical stainings. Proliferation was studied on a standard tissue culture plastic (sTCP) surface and on an adhesion supporting tissue culture plastic (asTCP) surface in basal (BM) and osteogenic (OM) culture medium conditions. We discovered that the improved cell adhesion was a prerequisite for vibration induced changes in the proliferation of hASCs. Similarly, the adhesion supporting surface enabled us to observe vibration initiated ALP activity and mineralization changes in OM condition. The horizontal vibration increased ALP activity, while vertical stimulation reduced ALP activity. However, mineralization was not enhanced by the HMHF vibration. We performed image-based analysis of actin and nuclei to obtain novel data of the intracellular-level responses to HF vibration in BM and OM conditions. Our quantitative results suggest that actin organizations were culture medium and stimulation direction dependent. Both stimulation directions decreased OM induced changes in nuclear size and elongation. Consequently, our findings of the nuclear deformations provide supportive evidence for the involvement of the nuclei in the mechanocoupling of HF vibration. Taken together, the results of this study enhanced the knowledge of the intracellular mechanisms of HF vibration induced osteogenesis of MSCs.

Effect of physical cues of altered extract media from biodegradable magnesium implants on human gingival fibroblasts

Volume stable barrier membranes made of magnesium are very promising in Guided Bone Regeneration (GBR) to treat periodontal bone defects in dentistry due to their excellent biocompatibility and biodegradability. During the degradation process the cells are exposed to the alteration of various parameters, so called physical cues, involving surface alterations due to the formed corrosion layer and medium alterations arising from the dissolved corrosion products. Cell migration of human gingival fibroblasts (HGF), as a crucial parameter for optimal healing process in GBR, has been investigated on magnesium membranes and revealed that medium alterations by dissolved corrosion products have a higher impact on cell migration than surface alterations. However, the effect of each altered medium parameter on cell migration has not been adequately studied, but their roles are crucial to explain the slower migration rate on magnesium surfaces compared to titanium and tissue culture plastic surfaces. Our study investigates the single effect of Mg2+, Ca2+, H2 and increased osmolality as well as the effect of magnesium extracts, which contain a dynamic mixture of previous parameters on cell migration, proliferation and viability of HGF. We showed that at 75 mM Mg2+ concentration and at 0 mM Ca2+, respectively, the cell migration rate is greatly reduced. In complex magnesium extract media, we found that a temporarily increased ratio of Mg2+ to Ca2+ conditioned a slow HGF migration rate. Based on these findings and the characterization of supernatants from HGF migration assays on Mg membranes, we propose, that the slower migration rate of HGF can be explained by the altered ratio of Mg2+ to Ca2+, caused by increasing concentrations of Mg2+ and decreasing concentrations of Ca2+ in the vicinity of the corroding Mg implant, combined with a constantly increased molecular hydrogen concentration in the supernatant. These results are cell type specific and should be checked carefully, if necessary, for Mg implant performance. Statement of SignificanceThe study is providing a systematic approach to explain the main effects of extract medium parameters (physical cues) such as magnesium or calcium ion concentration, osmolality and dissolved molecular hydrogen and CO2 in cell culture media modified by co-incubating with corroding magnesium implants on the migration rate of human gingival fibroblasts (HGF). This study uncovers for the first time the combinatory effect of slightly increased molecular hydrogen and the change in Mg2+/Ca2+ ratio on HGF cell migration.

The role of macrophage polarization on fibroblast behavior-an in vitro investigation on titanium surfaces.

This study investigated the effect of smooth and rough titanium surface topographies on macrophage polarization and their influence on gingival fibroblast behavior cultured on titanium surfaces. RAW 264.7 macrophages were seeded on smooth (pickled titanium (PT)) and rough Sand-blasted with Large grit particles followed by Acid-etching (SLA) titanium surfaces and first investigated for macrophage polarization towards tissue-inflammatory M1 macrophages or wound-healing M2 macrophages. Thereafter, culture media collected from macrophages on both surfaces were cultured with gingival fibroblasts seeded on their respective topographies. All experiments were performed in triplicate with three independent experiments. Macrophages seeded on SLA surfaces polarized towards tissue-inflammatory M1 macrophages at early time points. Immunofluorescent staining and RT-PCR analysis demonstrated higher levels of iNOS and gene expression of IL-1β, IL-6, and TNF-alpha on SLA surfaces at 3days when compared to both tissue culture plastic (TCP) and PT surfaces (p<0.001). Very little differences were found between smooth PT surfaces and TCP. Interestingly, proliferation assay (CCK-8) suggested that conditioned media (CM) from macrophages seeded on SLA surfaces drastically inhibited gingival fibroblast proliferation at 3 and 5days (p<0.001). Meanwhile, CM from macrophages cultured on SLA surfaces also significantly reduced collagen 1 synthesis on SLA surfaces at 14days as assessed by immunofluorescent staining (p<0.001). The results from this study demonstrate that the polarization of macrophages towards a pro-inflammatory (M1) phenotype on SLA surfaces may have a negative impact on gingival fibroblast behavior on titanium surfaces. Future strategies to better modulate macrophage polarization should be investigated to support a favorable immune response and encourage tissue integration. As SLA surfaces have a potential to shift macrophages towards tissue-inflammatory M1 macrophages, this might be a negative impact for soft tissue healing. Therefore, SLA surfaces should be kept within the bone, as when in contact with soft tissue, they are prone to support a lack of soft tissue integration leading to inflammation.

Umbilical cord blood-derived non-hematopoietic stem cells retrieved and expanded on bone marrow-derived extracellular matrix display pluripotent characteristics.

BackgroundUmbilical cord blood (UCB) not only contains hematopoietic stem cells (HSCs), but also non-hematopoietic stem cells (NHSCs) that are able to differentiate into a number of distinct cell types. Based on studies published to date, the frequency of NHSCs in UCB is believed to be very low. However, the isolation of these cells is primarily based on their adhesion to tissue culture plastic surfaces.Methods and resultsIn the current study, we demonstrate that this approach overlooks some of the extremely immature NHSCs because they lack the ability to adhere to plastic. Using a native extracellular matrix (ECM), produced by bone marrow (BM) stromal cells, the majority of the UCB-NHSCs attached within 4 h. The colony-forming unit fibroblast frequency of these cells was 1.5 × 104/108 mononuclear cells, which is at least 4000-fold greater than previously reported for UCB-NHSCs. The phenotype of these cells was fibroblast-like and different from those obtained by plastic adhesion; they formed embryonic body-like clusters that were OCT4-positive and expressed other human embryonic stem cell-related markers. Importantly, when implanted subcutaneously for 8 weeks into immunocompromised mice, these ECM-adherent and expanded NHSCs generated three germ layer-derived human tissues including muscle, fat, blood vessel, bone, gland, and nerve. Moreover, injection of these cells into muscle damaged by cryoinjury significantly accelerated muscle regeneration.ConclusionsThese results indicate that UCB may be a virtually unlimited source of NHSCs when combined with isolation and expansion on ECM. NHSCs may be a practical alternative to embryonic stem cells for a number of therapeutic applications.

Application of Graphene as Candidate Biomaterial for Synthetic Keratoprosthesis Skirt.

Synthetic keratoprostheses are required for visual rehabilitation in patients with end-stage corneal blindness. This study aimed to assess the biocompatibility of graphene material and its potential as a novel synthetic keratoprosthesis skirt material for corneal tissue engineering. Human corneal stromal fibroblasts were cultured on material surfaces including pristine graphene film, graphene foam, pristine titanium (Ti) discs, and tissue culture plastic surface (TCPS). Cell attachment was assayed by immunostaining of paxillin and vinculin. Cell viability and proliferation were assessed by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) and Click iT 5-ethynyl-2'-deoxyuridine (EdU) assays. The growth of fibroblasts on three-dimensional graphene foam was examined by scanning electron microscopy, and cytokine release was analyzed by enzyme-linked immunosorbent assay. Graphene films were implanted into rabbit corneal stromal pockets and examined by slit-lamp biomicroscopy, anterior segment optical coherence tomography, in vivo confocal microscopy, and histology. Pristine graphene demonstrated good biocompatibility with human stromal fibroblasts in terms of cell adhesion, viability, and proliferation. Cells on graphene films showed higher number than on TCPS control. Cells grown on graphene had 10% more proliferation than on Ti. The expression levels of IL-6 and IL-8 were reduced when cells were seeded on graphene foam as compared to Ti and graphene film. Implantation of graphene film into rabbit stroma (n = 6) did not show any signs of infection, neovascularization, or inflammation. Graphene displayed excellent short-term biocompatibility with corneal cells and tissue. This demonstrates that graphene can be developed as a tissue engineering material for use in cornea.

HiPS-MSCs differentiation towards fibroblasts on a 3D ECM mimicking scaffold.

Fibroblasts are ubiquitous cells that constitute the stroma of virtually all tissues and play vital roles in homeostasis. The poor innate healing capacity of fibroblastic tissues is attributed to the scarcity of fibroblasts as collagen-producing cells. In this study, we have developed a functional ECM mimicking scaffold that is capable to supply spatial allocation of stem cells as well as anchorage and storage of growth factors (GFs) to direct stem cells differentiate towards fibroblasts. Electrospun PCL fibers were embedded in a PEG-fibrinogen (PF) hydrogel, which was infiltrated with connective tissue growth factor (CTGF) to form the 3D nanocomposite PFP-C. The human induced pluripotent stem cells derived mesenchymal stem cells (hiPS-MSCs) with an advance in growth over adult MSCs were applied to validate the fibrogenic capacity of the 3D nanocomposite scaffold. The PFP-C scaffold was found not only biocompatible with the hiPS-MSCs, but also presented intriguingly strong fibroblastic commitments, to an extent comparable to the positive control, tissue culture plastic surfaces (TCP) timely refreshed with 100% CTGF. The novel scaffold presented not only biomimetic ECM nanostructures for homing stem cells, but also sufficient cell-approachable bio-signaling cues, which may synergistically facilitate the control of stem cell fates for regenerative therapies.

A 3D in vitro model of differentiated HepG2 cell spheroids with improved liver-like properties for repeated dose high-throughput toxicity studies

Immortalized hepatocyte cell lines show only a weak resemblance to primary hepatocytes in terms of gene expression and function, limiting their value in predicting drug-induced liver injury (DILI). Furthermore, primary hepatocytes cultured on two-dimensional tissue culture plastic surfaces rapidly dedifferentiate losing their hepatocyte functions and metabolic competence. We have developed a three-dimensional in vitro model using extracellular matrix-based hydrogel for long-term culture of the human hepatoma cell line HepG2. HepG2 cells cultured in this model stop proliferating, self-organize and differentiate to form multiple polarized spheroids. These spheroids re-acquire lost hepatocyte functions such as storage of glycogen, transport of bile salts and the formation of structures resembling bile canaliculi. HepG2 spheroids also show increased expression of albumin, urea, xenobiotic transcription factors, phase I and II drug metabolism enzymes and transporters. Consistent with this, cytochrome P450-mediated metabolism is significantly higher in HepG2 spheroids compared to monolayer cultures. This highly differentiated phenotype can be maintained in 384-well microtiter plates for at least 28days. Toxicity assessment studies with this model showed an increased sensitivity in identifying hepatotoxic compounds with repeated dosing regimens. This simple and robust high-throughput-compatible methodology may have potential for use in toxicity screening assays and mechanistic studies and may represent an alternative to animal models for studying DILI.

Receptor Kinase AXL is Modulated in the Osteogenic Differentiation of Human Mesenchymal Stromal Cells on Modified Titanium Implant Surfaces

Titanium (Ti) implants with micro-rough topography and high surface free energy promote osseointegration, which in vitro analyses suggest is due to a novel enhancement in cellular osteogenic differentiation and function. The AXL receptor tyrosine kinase (AXL) is expressed on mesenchymal stromal cells (MSCs) and is implicated with its ligand, Growth arrest-specific 6 (GAS6), in the negative regulation of osteogenic differentiation, and may be modulated in the enhanced osteogenic differentiation of MSCs on modified Ti surfaces. This hypothesis was tested by culturing human MSCs on tissue culture plastic (TCP), polished (P), micro-rough-hydrophobic (SLA) and micro-rough hydrophilic (modSLA) Ti surfaces for seven days. Total RNA and protein levels of AXL and GAS6 were examined by real time PCR and ELISA, respectively. The effects of deregulating the signalling pathway in hMSCs with either receptor agonist or antagonist were investigated by analysing calcium mineralisation and soluble osteoblastic marker synthesis. The MSCs were found to significantly down-regulate AXL and GAS6 earlier on rough surfaces compared to smooth over seven days. Addition of the receptor agonist caused a relative decrease in calcium mineralisation that was most marked for TCP compared to any Ti surface. The antagonist did not affect mineralisation but caused a relative increase in osteoblastic soluble protein levels on rough surfaces only. Gene expression data showed an up-regulation of RUNX2 and beta-catenin with the receptor antagonist. These findings suggest that a down-regulation of AXL correlates with increased cellular mineralisation on the modified surfaces and that it might be a putative biomarker for assessing the clinical efficacy of endosseous implants.

Cells Isolated from Human Periapical Cysts Express Mesenchymal Stem Cell-like Properties

We provide a detailed description of mesenchymal stem cells (MSCs) isolated from human periapical cysts, which we have termed hPCy-MSCs. These cells have a fibroblast-like shape and adhere to tissue culture plastic surfaces. hPCy-MSCs possess high proliferative potential and self-renewal capacity properties. We characterised the immunophenotype of hPCy-MSCs (CD73+, CD90+, CD105+, CD13+, CD29+, CD44+, CD45-, STRO-1+, CD146+) by flow cytometry and immunofluorescence. hPCy-MSCs possess the potential to differentiate into osteoblast- and adipocyte-like cells in vitro. Multi-potentiality was evaluated with culture-specific staining and quantitative reverse transcription-polymerase chain reaction (qRT-PCR) analysis for osteo/odontogenic and adipogenic markers. This is the first report to indicate that human periapical cysts contain cells with MSC-like properties. Taken together, our findings indicate that human periapical cysts could be a rich source of MSCs.

Increased matrix synthesis by fibroblasts with decreased proliferation on synthetic chitosan–gelatin porous structures

Influence of mechanical characteristics and matrix architecture of substrates used in cell culture is an important issue to tissue engineering. Chitosan-based materials have been processed into porous structures, injectable gels and membranes, and are investigated to regenerate various tissues. However, the effect of these structures on cell growth and matrix production in accordance with each of the differing scaffolds has not been examined. We investigated the influence of porous structures, hydrogels, and membranes on the growth of normal human fibroblasts and their matrix production in a serum-free system. We used chitosan alone and in combination with gelatin. Injectable hydrogels were prepared using 2-glycerol phosphate. From the same solution, porous scaffolds and membranes were formed using controlled rate freezing and lyophilization, and air-drying, respectively. Fibroblast growth was evaluated on the 4th and 10th days using flow cytometry and CFDA-SE pre-staining. Cell morphology was assessed using actin and nucleus staining. Total protein content, collagen, tropoelastin, and MMP2/MMP-9 activity in the media supernatant were assessed by BCA, Sircol™, Fastin Elastin, and fluorogeneic peptide assays. Collagen accumulated in the matrix was assessed by Sircol™ assay after pepsin/acetic acid digestion and by Masson's Trichrome staining. These results showed increased viability of fibroblasts on chitosan-gelatin porous scaffold with decreased proliferation relative to tissue culture plastic (TCP) surface despite the cells showing spindle shape. The total protein, collagen, and tropoelastin contents were higher in the spent media from chitosan-gelatin porous scaffolds compared to other conditions. MMP2/MMP9 activity was comparable to TCP. An increase in collagen content was also observed in the matrix, suggesting increased matrix deposition. In summary, matrix production is influenced by the form of chitosan structures, which significantly affects the regenerative process.

The enhanced modulation of key bone matrix components by modified Titanium implant surfaces

Modifications to Titanium (Ti) implant surfaces enhance osseointegration by promoting bone-implant contact and peri-implant bone accrual; which in vitro analyses of osteoblastic cells suggest is due to an enhancement in cellular phenotypic maturation and function. To evaluate these effects on uncommitted cells, this study examined the osteogenic mineralisation and phenotypic marker expression of human marrow derived stromal cells (hBMSCs) from three unrelated donors cultured on tissue culture plastic (TCP), polished (P), rough-hydrophobic (SLA) and rough-hydrophilic (modSLA) Ti surfaces over the course of 21 days. Transcriptional analyses indicated a significant early up-regulation of both Runx2 (p<0.05) and Osteopontin (OP) (p<0.05) but not Bone Sialoprotein 2 (BSP2) (p<0.05) by rough surfaces 1 day post seeding. The phenotypic analyses showed that whilst cellular proliferation was relatively restricted and slower on the rough substrates; osteogenic mineralisation, assessed by quantifying extracellular matrix calcium deposition, collagen formation and the ratio of collagen to mineral deposited were significantly higher (p<0.05); as was alkaline phosphatase (ALP) activity (p<0.05). The rough surfaces caused an increase of secreted osteoblastic markers Osteoprotegrin (OPG) (p<0.05), growth differentiation factor 15 (GDF-15) (p<0.05) and Osteocalcin (OC) (p<0.05). These findings suggest that modified Ti surfaces induce an enhancement in osteogenic commitment and differentiation, which likely underlie the deposition of more stable bone matrix early in the healing process in vivo.