Tissue Culture Grade Research Articles

Does The Use of Ethyl Chloride Improve Patient-Reported Pain Scores With Negative Pressure Wound Therapy Dressing Changes? A Prospective, Randomized Controlled Trial.

Negative pressure wound therapy (NPWT) is commonly used for surgical incisions and large wounds, particularly in the context of trauma. Research has shown that patients report that the most painful aspect of NPWT is related to foam dressing changes. This study aimed to determine whether topical use of the vapocoolant anesthetic ethyl chloride would impact patient-reported pain during these procedures. This study was a single-blinded, placebo-controlled randomized trial in patients who were undergoing NPWT foam dressing change following surgery performed by the orthopedic trauma team. A total of 100 patients were randomized to receive ethyl chloride topical anesthetic spray or placebo (tissue culture grade water) during dressing change. The outcome measure specified prior to enrollment was a mean decrease in patient-reported pain of 1.7 points using a numeric rating scale. Baseline and procedural characteristics were collected to investigate contributions to patient-reported pain. We hypothesized that the use of ethyl chloride would decrease patient reported pain scores. Significantly more females were randomized to the receive vapocoolant; remaining baseline and procedural characteristics were similar between groups. The median time for NPWT drape removal was 2.0 minutes in both groups (p = 0.66). The postprocedural pain reported by patients was significantly lower in the experimental group compared with placebo (median, 5.0 vs. 7.0; p = 0.03). Multivariate analysis adjusting for potential confounders showed treatment group to be the strongest predictor of postprocedure pain (p = 0.002). Additionally, a generalized linear model suggests that treatment group was the strongest predictor of change in pain score as reported by patients prior to and immediately following dressing change. Use of vapocoolant spray during NPWT dressing change for orthopedic trauma wounds and surgical incisions was feasible and resulted in significant reduction in patient-reported pain associated with the procedure. Therapeutic, Level I.

Evidence, origin and impact of liquid flows in plasma medicine in vitro treatments with APPJs

Plasma jets are being intensively studied for biomedicine applications but their fine control remains challenging due to the mutual interactions between plasma and target. Even considering one of the simplest scenario in a research laboratory, using a plasma jet to treat a 2D cells culture in a plastic multi-well plate, it is not known in detail how the physical environment of the micro-well may influence the nature of the plasma jet treatment. This study aims to shed light by investigating for the first time the liquid flows induced by the plasma treating a biologically-relevant liquid (e.g. PBS) in standard tissue culture grade multi well plates (i.e. 96, 24, 12 and 6 wells). Evaporation, induced by the anhydrous gas flow, is demonstrated to govern the thermal effect and be at the origin of the observed liquid cooling. Moreover, the formation of stable vortexes in the liquid induces a non-uniform distribution of plasma generated reactive species. This phenomenon, reported for various vessels and volumes of liquid, does not originate from thermal gradients but is instead the likely result of a combination of electrohydrodynamic forces and gas flow tangential components induced by the plasma impinging on the liquid surface.

Cardiovascular Effects of Polychlorinated Biphenyls and Their Major Metabolites.

Background:Xenobiotic metabolism is complex, and accounting for bioactivation and detoxification processes of chemicals remains among the most challenging aspects for decision making with in vitro new approach methods data.Objectives:Considering the physiological relevance of human organotypic culture models and their utility for high-throughput screening, we hypothesized that multidimensional chemical-biological profiling of chemicals and their major metabolites is a sensible alternative for the toxicological characterization of parent molecules vs. metabolites in vitro.Methods:In this study, we tested 25 polychlorinated biphenyls (PCBs) [PCB 3, 11, 52, 126, 136, and 153 and their relevant metabolites (hydroxylated, methoxylated, sulfated, and quinone)] in concentration–response () for effects in human induced pluripotent stem cell (iPSC)-derived cardiomyocytes (CMs) and endothelial cells (ECs) (iPSC-derived and HUVECs). Functional phenotypic end points included effects on beating parameters and intracellular flux in CMs and inhibition of tubulogenesis in ECs. High-content imaging was used to evaluate cytotoxicity, mitochondrial integrity, and oxidative stress.Results:Data integration of a total of 19 physicochemical descriptors and 36 in vitro phenotypes revealed that chlorination status and metabolite class are strong predictors of the in vitro cardiovascular effects of PCBs. Oxidation of PCBs, especially to di-hydroxylated and quinone metabolites, was associated with the most pronounced effects, whereas sulfation and methoxylation of PCBs resulted in diminished bioactivity.Discussion:Risk characterization analysis showed that although in vitro derived effective concentrations exceeded the levels measured in the general population, risks cannot be ruled out due to the potential for population variability in susceptibility and the need to fill data gaps using read-across approaches. This study demonstrated a strategy for how in vitro data can be used to characterize human health risks from PCBs and their metabolites. https://doi.org/10.1289/EHP7030

Normal Human Thyrocytes in Culture.

In order to study functions of normal human thyrocytes, we developed a protocol to obtain these cells in primary culture. Thyrocytes are obtained from normal tissue obtained at surgery for removal of thyroid neoplasms. Under sterile conditions, specimens are minced into small pieces, mono-dispersed cells are generated by digestion with collagenase type IV and the cells plated in tissue culture grade dishes in Dulbecco's modified Eagle's medium (DMEM) containing 10% fetal bovine serum (FBS). After 24h of incubation at 37°C in a humidified 5% CO2 incubator, the supernatant containing non-adherent cells is removed and the adherent cells are propagated in DMEM with 10% FBS, 100IU/mL penicillin, and 10μg/mL streptomycin. Cells proliferate with a doubling time of 72-94h and retain functional characteristics for 9-12 doublings. We have used them successfully in studies to elucidate the signaling by thyrotropin (TSH) and insulin-like growth factor 1.

The use of substrate materials and topography to modify growth patterns and rates of differentiation of muscle cells.

Cells are cultured on platforms made of a variety of materials with selected topographies during studies of cell response and behavior. Understanding the effects of substrates is essential for such applications as developing effective interfaces between body cells and implanted materials and devices. In this study, the effects of substrate surface properties on cell differentiation and alignment on C2C12 myoblasts cultured on conventional or fabricated polymeric cell culture substrates were investigated. Comparisons were made between cells cultured on tissue culture grade polystyrene (TCPS), glass, Permanox, and cured polydimethylsiloxane (PDMS) substrates. Fluorescent immunohistochemistry of cell markers was used to analyse the extent of differentiation. Alignment and guidance of cell growth and spread were studied using patterned platforms. Gratings were made on polystyrene (PS) and PDMS and differentiation was facilitated after 5 days by media exchange. Differences in cell morphology were observed between cells cultured on TCPS and PDMS substrates. Fully differentiated myotubes were observed in highest numbers on TCPS substrates and were non-detectable on PDMS substrates in the time frame of 144 h. Muscle cell alignment and their differentiation followed along the grating patterns on PS and elongated along the pattern length. On the other hand, on PDMS cells formed sheets of tissue and peeled from the substrate. We have revealed the potential for the combinations of surface materials and topography on cell behavior to induce accelerated differentiation and coordinated alignment. The results demonstrate that culture environment can be designed or engineered to modify or regulate muscle cell functions. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1638-1645, 2016.

RCW: Day 0

smb, h stc, h chtm, h rodi, h stc, vg smb, vg chtm, vg rodi, vg Notice for this trial there is no sample with no seeds. Here’s some nomenclature for you: rodi – Easypure RoDI water purified in the lab chtm – deionized water produced in house at CHTM smb – purchased commerical water from Sigma that is molecular biology grade stc – purchased commerical water from Sigma that is tissue culture grade h – havanna tobacco seeds vg – virginia gold #1 tobacco seeds

Biohydrogels Interpenetrated with Hydroxyethyl Cellulose and Wooden Pulp for Biocompatible Materials

Biohydrogel interpenetrated films of wooden pulp cellulose and hydroxyethyl cellulose (HEC) were prepared, and their biomedical properties were investigated. Our purpose was to obtain new material combining the nontoxicity and biocompatibility in wooden pulp cellulose films by interpenetration of HEC. It was found that the increment of HEC content affects the mechanical properties of the hydrogel from 10 to 50 wt % content of HEC. In vitro biocompatibility tests showed that protein adsorption, clotting time, and platelet adhesion were affected with the increment of HEC. All of the obtained hydrogels showed better cytocompatibility than the reference on a tissue culture grade polystyrene dish. However, HEC content seemed to decrease fibroblast cell densities due to its effect on the film properties, showing different pulp aggregation. In conclusion, the cell densities on hydrogel were significantly changed depending upon the HEC interpenetration.

Mediatory role of interleukin‐6 in α smooth muscle actin induction and myofibroblast formation around silicone tissue expander

Materials used for medical devices are usually tested for their biocompatibility, before use. However, it is known that long-term implantation in the body may lead to degradation of the material leading to an adverse tissue response. The failure of silicone breast implants due to excessive fibrosis and contracture has led to studies to delineate the cause of fibrosis around this material. To detect the biological moieties involved, conditioned media from RAW 264.7 macrophages seeded over commercially available silicone tissue expander material was added to L929 fibroblasts. Ultrahigh-molecular-weight polyethylene and tissue culture grade polystyrene served as the control materials. The gene expression of fibrogenic cytokines, interleukin-6 (IL-6), and transforming growth factor beta (TGFβ) in the RAW macrophages and myofibroblast marker alpha smooth muscle actin (αSMA) in L929 cells were quantitated by real time polymerase chain reaction. Protein expression analysis of αSMA was carried out by immunocytochemical staining and confocal microscopy. An in vitro degradation study of silicone expander material in pseudoextracellular fluid (PECF) and the αSMA expression in fibroblasts incubated with the silicone extract containing PECF has revealed the role of silicone leachants in induction of myofibroblasts. This in vitro expression study revealed the additional profibrotic role of IL-6 in fibroblast to myofibroblast transition and the synergy between material aspects and biomolecules in regulating fibrosis around Silicone implants. These findings may help in targeting newer biological moieties in the profibrotic pathway and in devising better manufacturing processes aiding the life of millions of patients.

A novel conserved targeting motif found in ABCA transporters mediates trafficking to early post-Golgi compartments

The ATP binding cassette, class A (ABCA) proteins are homologous polytopic transmembrane transporters that function as lipid pumps at distinct subcellular sites in a variety of cells. Located within the N terminus of these transporters, there exists a highly conserved xLxxKN motif of unknown function. To define its role, human ABCA3 was employed as a primary model representing ABCA transporters, while mouse ABCA1 was utilized to support major findings. Transfection studies showed colocalization of both transporters with surfactant protein C (SP-C), a marker peptide for successful protein targeting to lysosomal-like organelles. In contrast, alanine mutation of xLxxKN resulted in endoplasmic reticulum retention. As proof of principle, swapping xLxxKN for the known lysosomal targeting motif of SP-C resulted in post-Golgi targeting of the SP-C chimera. However, these products failed to reach their terminal processing compartments, suggesting that the xLxxKN motif only serves as a Golgi exit signal. We propose a model whereby an N-terminal signal sequence, xLxxKN, directs ABCA transporters to a post-Golgi vesicular sorting station where additional signals may be required for selective delivery of individual transporters to final subcellular destinations.

The pro-myogenic environment provided by whole organ scale acellular scaffolds from skeletal muscle

In the pursuit of a transplantable construct for the replacement of large skeletal muscle defects arising from traumatic or pathological conditions, several attempts have been made to obtain a highly oriented, vascularized and functional skeletal muscle. Acellular scaffolds derived from organ decellularization are promising, widely used biomaterials for tissue engineering. However, the acellular skeletal muscle extra cellular matrix (ECM) has been poorly characterized in terms of production, storage and host–donor interactions. We have produced acellular scaffolds at the whole organ scale from various skeletal muscles explanted from mice. The acellular scaffolds conserve chemical and architectural features of the tissue of origin, including the vascular bed. Scaffolds can be sterilely stored for weeks at +4 °C or +37 °C in tissue culture grade conditions. When transplanted in wt mice, the grafts are stable for several weeks, whilst being colonized by inflammatory and stem cells. We demonstrate that the acellular scaffold per se represents a pro-myogenic environment supporting de novo formation of muscle fibers, likely derived from host cells with myogenic potential. Myogenesis within the implant is enhanced by immunosuppressive treatment. Our work highlights the fundamental role of this niche in tissue engineering application and unveils the clinical potential of allografts based on decellularized tissue for regenerative medicine.

Photo-Cross-Linkable Thermoresponsive Star Polymers Designed for Control of Cell-Surface Interactions

Star polymers with thermoresponsive arms, consisting of 2-(2-methoxyethoxy)ethyl methacrylate (MEO₂MA) and oligo(ethylene glycol) methacrylate with ~4 ethylene oxide units (OEOMA₃₀₀, M(n) = 300), were synthesized via atom transfer radical polymerization (ATRP). 25% of the arms contained benzophenone chain-end functionality at the star periphery. A mixture of linear poly(MEO₂MA-co-OEOMA₃₀₀)-Br macroinitiators without and with benzophenone end-group macroinitiators were (MI and Bzp-MI, respectively) cross-linked with ethylene glycol dimethacrylate to form star polymers. Formation of star polymers was monitored by GPC, and the presence of benzophenone functionality in the stars was confirmed by ¹H NMR. The UV-vis spectroscopy revealed that the star polymers exhibit the low critical solution temperature (LCST) at 27 °C, slightly lower than LCST of either MI or Bzp-MI. Commercially available tissue culture grade polystyrene surface was modified by depositing a thin film of functionalized stars and UV cross-linking (λ = 365 nm). The star polymers covalently attached onto surfaces allowed a control of cell shrinkage and attachment in response to temperature changes.

MiR-146a Is Critical for Endotoxin-induced Tolerance

The human toll-like receptor 4 (TLR4) pathway is activated in response to lipopolysaccharide (LPS), and subsequent signal transductions lead to the production of cytokines such as tumor necrosis factor-α (TNF-α) by innate immune cells. Defects in innate immune response may contribute to the overproduction of TNF-α leading to systemic inflammation and diseases. Thus, the innate immune response needs to be tightly regulated by elaborate mechanisms to control its onset and termination. LPS tolerance is a state of hyporesponsiveness to subsequent LPS challenge and is achieved by monocytic cells after prolonged exposure to LPS. In this report, kinetics of endotoxin-responsive microRNAs expression analysis revealed a unique pattern of gradual increase for miR-146a starting 4 h after LPS stimulation in THP-1 cells and continued up to 35-fold over 24 h. Conversely, TNF-α increased up to 4 h and then decreased gradually implicating a negative correlation with miR-146a progression. The characteristic up-regulation of miR-146a toward subsequent LPS challenge in THP-1 cells was studied. Strikingly, microRNA expression analysis during the tolerized state of THP-1 cells showed only miR-146a overexpression suggesting its important role in LPS tolerance. In addition, LPS tolerance was dependent on a LPS-priming dose and associated miR-146a up-regulation. LPS-tolerized cells were observed to regain responsiveness in TNF-α production 22 h after LPS removal correlating with a decrease in miR-146a level. Transfection of miR-146a into THP-1 cells mimicked LPS priming, whereas transfection of miR-146a inhibitor largely abolished LPS tolerance. Thus our studies demonstrated that miR-146a is critical for the in vitro monocytic cell-based endotoxin tolerance.

Is Cell Culture Stressful? Effects of Degradable and Nondegradable Culture Surfaces On U937 Cell Function

In vitro cell culture has become one of the most widely used techniques in biological and health sciences research, with the most common culture supports being either tissue culture grade polystyrene (TCPS) or polydimethylsiloxane (PDMS). It has previously been shown that monocyte-derived macrophages (MDMs) respond to material surface chemistry, synthesizing and releasing degradative activities that could produce products, which alter the cell's response. In this study, functional parameters of differentiated U937 macrophage-like cells were compared when cultured on nondegradable standard control surfaces versus models of biomaterials (polycarbonate-based polyurethanes) used in the manufacture of medical devices previously shown to degrade and/or elicit pathways of inflammation. Although the influence of PDMS and TCPS on cell function is often underappreciated by investigators, both surfaces elicited enzyme markers of inflammation. Cells on TCPS had the highest intracellular and released esterase activities and protein levels. Cells on PDMS had the most released acid phosphatase activity and protein (P < 0.001), as well as de novo 57- and 59-kDa released proteins. The criteria for defining an activated cell phenotype become critically important when materials such as PDMS and TCPS are used as standard control surfaces whether in experiments for research in elucidating metabolic pathways or in screening drugs and materials for therapeutic uses.

Phenotype and gene expression pattern of osteoblast‐like cells cultured on polystyrene and hydroxyapatite with pre‐adsorbed type‐I collagen

Hydroxyapatite and type-I collagen are major components of bone matrix. We compared phenotype and gene expression pattern of osteoblast-like cells cultured on HAp and HAp with pre-adsorbed type-I collagen from neutral solutions (HAp/NCs) with those of tissue culture grade polystyrene (TCPS) and TCPS with the collagen (TCPS/NCs). In initial cell attachment, the cells tensely spread on TCPS, while loosely spread on TCPS/NCs, HAp, and HAp/NCs. The levels of expressed integrin alpha2 and alpha5 subunits were not significantly different among any surfaces. Although the cells on HAp/NCs directly attached with the same collagen molecules as TCPS/NCs, mineralization was observed in only TCPS/NCs. The basal substrates (TCPS and HAp) greatly influenced osteoblast maturation even in the surfaces with pre-adsorbed collagen, since mineralization was induced by TCPS, but not by HAp. Gene expression pattern analyzed with DNA microarray also supported greater influence of basal substrates than pre-adsorbed collagen. In addition, comprehensive gene expression analyses revealed that HAp and HAp/NCs specifically up-regulated Ly6a and Tmem37 genes, while down-regulated Ifitm5 gene.

Glow discharge modified tissue culture polystyrene: role of surface chemistry in cellular attachment and proliferation

A radio frequency glow discharge has been used to selectively deposit non-polar hydrocarbon films onto tissue culture grade polystyrene surfaces. The resulting surfaces have been studied using X-ray photoelectron spectroscopy, contact angle analysis and atomic force microscopy. Regions with differing surface chemistry and polarity have been produced on the same substrate using a simple masking technique and allowed the spatially controlled attachment of mammalian cells. The attachment of cells to plasma modified tissue culture polystyrene surfaces has been correlated to the concentration of specific oxygen functional groups.

Organogenesis on Root, Leaf, Stem-Disc, and Scape Explants of Eryngium foetidum L., a Rare Medicinal Plant

ABSTRACT A single medium-based plant regeneration protocol via organogenesis from root, leaf, stem-disc, and scape explants of Eryngium foetidum L. was established on Murashige and Skoog (MS) medium supplemented with growth regulators. Shoot and root induction on media prepared with tap water and commercial sugar did not differ from that prepared with double-distilled water and tissue culture grade sucrose. Both the type of explant tissue and the growth regulator added to the media significantly influenced the number of shoots. Kinetin was more effective than benzyladenine in inducing shoot formation. A combination of 4.65 μM Kn and 2.22 μM BA induced the greatest number of shoots on all types of explants. Scape explants were the best for shoot formation and developed a mean of 37.2 shoots per explant on the combination of Kn and BA. Callus formation was a characteristic of the BA supplemented medium. Shoot initiation/multiplication media (MS with 4.65 μMKn and 2.22 μMBA) facilitated development of roots from the base of 70 percent of the shoots. Rootless shoots transferred onto half-strength MS basal medium developed a mean of 16.2 roots per shoot. Upon transfer to the field, 90 percent of the plantlets survived and exhibited morphological characters identical to those of the source plant.

Pre-adsorbed type-I collagen structure-dependent changes in osteoblastic phenotype

Type-I collagen is the most abundant extracellular matrix in bones and modulates various functions of osteoblasts. We prepared two different structures of type-I collagen on tissue culture grade polystylene (TCPS) surfaces, one is feltwork structure of filamentous molecules from acid solutions (ACs) and the other is network structure of fibrils from neutral solutions (NCs), to examine effects of the structures on the maturation process of osteoblast-like cells. No significant differences of cell proliferation were observed between TCPS and ACs, but NCs delayed the proliferation. In initial cell attachment, the cells on ACs had tense lamellipodia with sharp tips, while those on NCs had loose lamellipodia. No detectable differences in levels of expressed integrin α 2- and α 5-subunits were observed between the structures. Although the matrix mineralization in NCs was also delayed in comparison with TCPS and ACs, fully mineralized levels in NCs were the same as those of TCPS and ACs. In addition, although we examined the effects of densities of pre-adsorbed collagen molecules on osteoblast maturation, the effects were less serious than those of the structures. This study suggests that the structures of collagen affect proliferation and mineralization of osteoblast-like cells.

The human macrophage response during differentiation and biodegradation on polycarbonate-based polyurethanes: Dependence on hard segment chemistry

Human monocytes, isolated from whole blood, were seeded onto tissue culture grade polystyrene (PS) and three polycarbonate-based polyurethanes (PCNUs) (synthesized with either 1,6-hexane diisocyanate (HDI) or 4,4′-methylene bis-phenyl diisocyanate (MDI), poly(1,6-hexyl 1,2-ethyl carbonate) diol (PCN) and 1,4-butanediol (BD) in different stoichiometric ratios (HDI:PCN:BD 4:3:1 or 3:2:1 and MDI:PCN:BD 3:2:1) (referred to as HDI431, HDI321 and MDI321, respectively). Following their differentiation to monocyte-derived macrophages (MDMs) the cells were trypsinized and reseeded onto each of the PCNUs synthesized with either 14C-HDI or 14C-BD and degradation was measured by radiolabel release (RR). When the differentiation surface was MDI321, there was more RR from 14C-HDI431 than from any other surface ( p < 0.0001 ) whereas the amount of esterase (identified by immunoblotting) as well as the esterase activity was the greatest in MDM differentiated on PS, reseeded on 14C-HDI431 ( p < 0.0001 ). The effect of potential degradation products (methylene dianiline (MDA) and BD) from the PCNUs was carried out to determine possible links between products and substrate-induced activation of MDM. MDA was found to inhibit RR 60% from MDM seeded on 14C-MDI321B ( p < 0.0001 ), ∼20% from 14C-HDI431 ( p = 0.002 ) and no effect from 14C-HDI321B. MDA inhibited esterase activity 30% from MDM only on 14C-MDI321B ( p = 0.003 ), but no effect on esterase activity was observed for the other two polymers. BD had no inhibitory effect on RR from any PCNU, but did inhibit esterase activity in MDM on 14C-HDI431 ( p = 0.025 ). This study indicates that the degradation of a specific material is a multi-factorial process, dictated by its susceptibility to hydrolysis, the effect of specific products generated during this course of action, and perhaps not as well appreciated, the material's inherent ability to influence enzyme synthesis and release.

Dkk-1-derived Synthetic Peptides and Lithium Chloride for the Control and Recovery of Adult Stem Cells from Bone Marrow

It is established that human mesenchymal stem cells (hMSCs) from bone marrow are a source of osteoblast progenitors in vivo and under appropriate conditions, differentiate into osteoblasts ex vivo. Because hMSCs are recovered by iliac crest aspirate and enriched by virtue of their adherence to tissue culture plastic, the cells provide a convenient ex vivo model for the study of osteogenic tissue repair in an experimentally accessible system. Recent advances in the field of skeletal development and osteogenesis have demonstrated that signaling through the canonical wingless (Wnt) pathway is critical for the differentiation of progenitor cell lines into osteoblasts. Inhibition of such signals can predispose MSCs to cell cycle entry and inhibit osteogenesis. Here, we report that synthetic peptides derived from the second cysteine-rich domain of the canonical Wnt inhibitor Dickkopf-1 (Dkk-1) have utility in controlling the growth and recovery of hMSCs from bone marrow stroma. Three peptides corresponding to residues 217-269 in Dkk-1 were each found to enhance the proliferation of hMSCs in culture over 2 days. The most active peptide exhibited agonistic characteristics in that it ablated the proliferation lag observed when cultures of hMSCs receive fresh medium. It also reduced the expression of endogenous Dkk-1 (Gregory, C. A., Singh, H., and Prockop, D. J. (2003) J. Biol. Chem. 278, 28067-28078). When the cytosolic level of beta-catenin was elevated by addition of LiCl to cultures of hMSCs, the peptide also accelerated degradation of beta-catenin on withdrawal of lithium. A second peptide, corresponding to residues 184-204 had preferential and high affinity for hMSCs in the log phase of proliferation. Peptide overlay assays on hMSC lysates confirmed that the peptide bound to a 184-kDa protein corresponding to the molecular mass of LRP6. Cells recovered by this peptide had enhanced osteogenic potential but less chondrogenic potential compared with controls. Because Wnt antagonists increase the number of non-committed hMSCs in culture, they may be of use in increasing the rate of osseous wound healing in vivo by increasing the level of systemically migrating hMSCs. Therefore, such molecules could contribute to the development of a novel family of pharmaceutical agents for the improvement of the healing process in humans.

The effect of biomimetic apatite structure on osteoblast viability, proliferation, and gene expression

The conventional biomimetic apatite coating process can be accelerated by immersing substrates into concentrated simulated body fluid (5× SBF) at 37°C to form an initial coating of apatite precursor spheres, and transform the precursors into plate-like apatite structures. Depending on processing parameters, different apatite structures can be created over the same substrate. The purpose of this study is to investigate the effects of the different apatite microenvironment on cell spreading, viability, proliferation, and gene expression. MC3T3-E1 preosteoblasts were cultured on five surfaces: conventional apatite (CA), precursor apatite spheres (PreA), large plate-like apatites (LgA), small plate-like apatites (SmA), and tissue culture grade polystyrene (TCPS). PreA induced significantly higher cell death during the first two weeks. TCPS supported more uniform spreading (1 day) and higher proliferation (2 weeks) than CA, LgA, and SmA. Apatites restricted spreading and promoted the extension of cellular projections along the textured surfaces under confocal microscopy observation. By 3 weeks, LgA induced highest expression of mature osteogenic markers osteocalcin (OCN) and bone sialoprotein (BSP) in both regular and osteogenic culture media based on quantitative real-time RT-PCR. The results of this study suggest differential cell responses to subtle changes in apatite microenvironment.