Tip-enhanced Raman Spectroscopy Research Articles

Single-molecule tip-enhanced Raman spectroscopy of C60 on the Si(111)-(7 × 7) surface.

Tip-enhanced Raman spectroscopy (TERS), combined with low-temperature scanning tunnelling microscopy (STM), has emerged as a highly sensitive method for chemical characterization, offering even sub-molecular resolution. However, its exceptional sensitivity is generally limited to molecules adsorbed onto plasmonic surfaces. Here we demonstrate single-molecule TERS for fullerene (C60) adsorbed on the Si(111)-(7 × 7) reconstructed surface. Distinct adsorption geometries of C60 are manifested in the TERS spectra. In addition, we reveal that formation of a molecular-point-contact (MPC) drastically enhances Raman scattering and leads to the emergence of additional vibrational peaks, including overtones and combinations. In the MPC regime, the anti-Stokes peaks are observed, revealing that vibrationally excited states are populated through optical excitation of the MPC junction, whereas showing no significant vibrational heating by current flow via inelastic electron-vibration scattering. Our results will open up the possibility of applying TERS for semiconducting surfaces and studying microscopic mechanisms of vibrational heating in metal-molecule-semiconductor nanojunctions.

Ultralow-Frequency Tip-Enhanced Raman Scattering Discovers Nanoscale Radial Breathing Mode on Strained 2D Semiconductors.

Collective excitations including plasmons, magnons, and layer-breathing vibration modes emerge at an ultralow frequency (<1 THz) and are crucial for understanding van der Waals materials. Strain at the nanoscale can drastically change the property of van der Waals materials and create localized states like quantum emitters. However, it remains unclear how nanoscale strain changes collective excitations. Herein, ultralow-frequency tip-enhanced Raman spectroscopy (TERS) with sub-10nm resolution under ambient conditions is developed to explore the localized collective excitation on monolayer semiconductors with nanoscale strains. A new vibrational mode is discovered at around 12 cm-1 (0.36 THz) on monolayer MoSe2 nanobubbles and it is identified as the radial breathing mode (RBM) of the curved monolayer. The correlation is determined between the RBM frequency and the strain by simultaneously performing deterministic nanoindentation and TERS measurement on monolayer MoSe2. The generality of the RBM in nanoscale curved monolayer WSe2 and bilayer MoSe2 is demonstrated. Using the RBM frequency, the strain of the monolayer MoSe2 on the nanoscale can be mapped. Such an ultralow-frequency vibration from curved van der Waals materials provides a new approach to study nanoscale strains and points to more localized collective excitations to be discovered at the nanoscale.

A feasibility study on scanning imaging of tip-enhanced Raman spectroscopy using a spiral plasmonic lens

A feasibility study on scanning imaging of tip-enhanced Raman spectroscopy using a spiral plasmonic lens

Insights into Heterogeneous Catalysis by Tip‐Enhanced Raman Spectroscopy

AbstractHeterogeneous catalysis is immensely important in the chemical industry. Understanding the molecular mechanism of heterogeneous catalytic processes is fundamental to the design of high‐performance catalysts and the development of energy conversion technology. Tip‐enhanced Raman spectroscopy (TERS) provides invaluable topographic and chemical information with nanometer‐scale spatial resolution, thus making it a promising tool for the in‐depth characterization of heterogeneous catalytic processes. In this perspective, we first introduce the background of heterogeneous catalysis and TERS, and then we systematically discuss the application of TERS in heterogeneous catalysis. Key insights related to catalyst configurations, catalytically active sites, reacting species, spillover of active species, and structure‐reactivity relationship were summarized. Finally, we discuss the challenges and future development in the field.

Insights into the LiMn2O4 Cathode Stability in Aqueous Electrolytes

Insights into the LiMn₂O₄ Cathode Stability in Aqueous Electrolytes

Imaging spatial plasmon mode of nanocavity formed by Au tip and Au nanorod lattice in tip-enhanced Raman spectroscopy

The integration of Au nanorods in tip-enhanced Raman spectroscopy (TERS) presents a significant increase in the enhancement factor, primarily due to the gap-mode effect. By aligning Au nanorods in parallel, we construct an Au nanorod lattice, referred to as the Au nanolattice, which further amplifies the advantages of TERS imaging due to the induced inter-nanorod surface plasmon resonance. A critical aspect in this research involves investigating the distribution of hotspots within the nanolattice during TERS measurements. Additionally, we demonstrate that the tip–lattice nanocavity is a predominant factor in determining both the intensity and spatial distribution of these hotspots. Employing the experimental and simulation results, we illustrate the enhancement effect of the tip–lattice cavity and elucidate the connection between the hotspot intensity and cavity size. This comprehensive approach contributes to our understanding of the nano-lattice’s role in TERS and offers valuable insights for optimizing nanophotonic applications.

Modification of transition pathways in polarized resonance Raman spectroscopy for carbon nanotubes by highly confined near-field light

We observed a modification of transition pathways in polarized resonance Raman spectroscopy during tip-enhanced Raman spectroscopy (TERS) analysis of metallic carbon nanotubes (CNTs). At a spatial resolution reaching up to the sub-nanometer regime, the signal intensity of the typical D-band is observed to be even higher than the intensity of the G-band all over the probed CNTs in TERS imaging. The measured D-band is attributed to the non-vertical transitions of electrons in k-space that are facilitated by highly confined near-field light at the tip–sample junction of our scanning tunneling microscope based TERS system. The D-band signal was observed even when the CNTs were excited by light polarized perpendicular to the tube axis that corresponds to electronic excitations between different cutting line numbers of a CNT. By combining the electron pathways brought about by both the near-field light and its polarization, we found a unique optical transition of electrons of CNTs in near-field Raman spectroscopy.

Resonant Tip-Enhanced Raman Spectroscopy of a Single-Molecule Kondo System.

Tip-enhanced Raman spectroscopy (TERS) under ultrahigh vacuum and cryogenic conditions enables exploration of the relations between the adsorption geometry, electronic state, and vibrational fingerprints of individual molecules. TERS capability of reflecting spin states in open-shell molecular configurations is yet unexplored. Here, we use the tip of a scanning probe microscope to lift a perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) molecule from a metal surface to bring it into an open-shell spin one-half anionic state. We reveal a correlation between the appearance of a Kondo resonance in differential conductance spectroscopy and concurrent characteristic changes captured by the TERS measurements. Through a detailed investigation of various adsorbed and tip-contacted PTCDA scenarios, we infer that the Raman scattering on suspended PTCDA is resonant with a higher excited state. Theoretical simulation of the vibrational spectra enables a precise assignment of the individual TERS peaks to high-symmetry Ag modes, including the fingerprints of the observed spin state. These findings highlight the potential of TERS in capturing complex interactions between charge, spin, and photophysical properties in nanoscale molecular systems and suggest a pathway for designing single-molecule spin-optical devices.

Fabrication of plasmonic probes for reproducible nanospectroscopic investigation of lipid monolayers – The electrochemical etching with DC-pulsed voltage

Tip-enhanced Raman spectroscopy (TERS) is a label-free analytical technique that characterizes molecular systems, potentially even with a nanometric resolution. In principle, the metallic plasmonic probe is illuminated with a laser beam generating the localized surface plasmons, which induce a strong local electric field enhancement in close proximity to the probe. Such field enhancement improves the Raman scattering cross-section from the sample volume localized near the probe apex. TERS provides a high spatial resolution and a great sensitivity, however, it is rather rarely used due to technical limitations causing unstable enhancement and the relative lack of data reproducibility. Despite many scientific efforts for the fabrication of effective TER probes providing robust TER enhancement still requires further investigations. In this work, we explore new possibilities based on preparation of scanning tunnelling microscopy (STM) plasmonic probes, since by nature of the tunnelling effect, they potentially could offer a very high spatial resolution in STM guided TERS experiments. Here we compare two methods of STM-TERS probe preparation for effective spectra acquisition. Our results strongly indicate that an application of square pulse voltage upon the etching procedure significantly improves the quality of the TER data over those obtained with a constant voltage one. To demonstrate the efficiency of our probes we present the results of hyperspectral TER mapping of the 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) monolayer deposited on an ultra-pure and atomically flat gold substrate.

Nano-Raman Spectroscopy of 2D Materials

Abstract The use of nano-Raman spectroscopy to study two-dimensional (2D) systems is presented here. The nano (tip-enhanced) Raman spectroscopy (TERS) technique is briefly introduced, addressing some new theoretical aspects for Raman spectroscopy in the near-field regime, including field coherence, field distribution and the relevance of atomic description and quenching effects. State-of-the-art results in graphene and transition metal dichalcogenides are presented, exploring the connection between micro- and nano-Raman metrology. Various aspects such as defects, homojunctions, twisted-bilayer structures, localized emissions at bubbles, wrinkles, and borders, as well as substrate and coherence effects are addressed in detail. The paper concludes by outlining the perspectives for nano-Raman spectroscopy in 2D systems, highlighting its potential for advancing our understanding of nanoscale phenomena and facilitating further breakthroughs in materials science and characterization.&amp;#xD;

Direct Observation of Carbonate Chemisorption on Barium Titanate Surfaces by Tip‐Enhanced Raman Spectroscopy

AbstractSurface chemistry significantly influences the physicochemical and functional properties of nanoparticles, thus necessitating the investigation of surfaces, especially when subjected to chemisorption. Seeking a method that delivers both high‐resolution imaging and precise chemical information, tip‐enhanced Raman spectroscopy (TERS) emerges as a critical technique. By the combination of scanning probe microscopy with Raman spectroscopy, TERS effectively addresses the limitations of traditional optical microscopes in the study of nanoparticles. The results provide detailed nanoscale structural insights, shed light on surface chemistry, and enable the detection of Raman‐forbidden modes caused by the substantial electric field at the tip apex (≈3 × 108 V m−1). This electric field plays a crucial role in altering selection rules, thereby broadening the scope of TERS beyond merely detecting Raman modes. By combining topographical with TERS mapping, the presence of a carbonate monolayer on the barium titanate (BaTiO3) nanoparticle surface is unveiled – an observation elusive to common characterization techniques.

Strained Silicon Technology: Non-Destructive High-Lateral-Resolution Characterization Through Tip-Enhanced Raman Spectroscopy

Strained Silicon Technology: Non-Destructive High-Lateral-Resolution Characterization Through Tip-Enhanced Raman Spectroscopy

Spring constant of an AFM cantilever with a thin-film plasmonic waveguide formed at its end

Abstract Atomic-force-microscope (AFM)-based tip-enhanced Raman spectroscopy (TERS) is a promising analytical technique that can identify the physical and chemical properties of a sample’s surface. In the conventional TERS setup, the tip is directly irradiated by an incident light, which causes degradation of the contrast of the TERS signal due to the Raman scattered light from the surface area around the tip. We recently developed an AFM cantilever for indirect illumination AFM-TERS by milling the tip of the conventional cantilever to form a thin-film waveguide. Since the thin-film waveguide is considered as another cantilever attached at the end of the original cantilever, the waveguide cantilever can be treated as cantilevers connected in series. We then analyzed the static spring constant of the waveguide cantilever by both analytical and numerical methods and found that the static spring constant of the waveguide cantilever is lower than that of the original cantilever, which is advantageous in reducing the contact damage during the TERS measurements. We also proposed procedures to experimentally calibrate the static spring constant of the waveguide cantilever.

Mechanistic Understanding of Oxygen Activation on Bulk Au(111) Surface Using Tip-Enhanced Raman Spectroscopy.

Gaining mechanistic understanding of oxygen activation on metal surfaces is a topical area of research in surface science. However, direct investigation of on-surface oxidation processes at the nanoscale and the empirical validation of oxygen activation pathways remain challenging for the conventional analytical tools. In this study, we applied tip-enhanced Raman spectroscopy (TERS) to gain mechanistic insights into oxygen activation on bulk Au(111) surface. Specifically, oxidation of 4-aminothiophenol (4-ATP) to 4-nitrothiophenol (4-NTP) on Au(111) surface was investigated using hyperspectral TERS imaging. Nanoscale TERS images revealed a markedly higher oxidation efficiency in disordered 4-ATP adlayers compared to the ordered adlayers signifying that the oxidation of 4-ATP molecules proceeds via interaction with the on-surface oxidative species. These results were further validated via direct oxidation of the 4-ATP adlayers with H2O2 solution. Finally, TERS measurements of oxidized 4-ATP adlayers in the presence of H2O18 provided the first empirical evidence for the generation of oxidative species on bulk Au(111) surface via water-mediated activation of molecular oxygen. This study expands our mechanistic understanding of oxidation chemistry on bulk Au surface by elucidating the oxygen activation pathway.

Nanoscale Chemical Probing of Metal-Supported Ultrathin Ferrous Oxide via Tip-Enhanced Raman Spectroscopy and Scanning Tunneling Microscopy.

Metal-supported ultrathin ferrous oxide (FeO) has attracted immense interest in academia and industry due to its widespread applications in heterogeneous catalysis. However, chemical insight into the local structural characteristics of FeO, despite its critical importance in elucidating structure-property relationships, remains elusive. In this work, we report the nanoscale chemical probing of gold (Au)-supported ultrathin FeO via ultrahigh-vacuum tip-enhanced Raman spectroscopy (UHV-TERS) and scanning tunneling microscopy (STM). For comparative analysis, single-crystal Au(111) and Au(100) substrates are used to tune the interfacial properties of FeO. Although STM images show distinctly different moiré superstructures on FeO nanoislands on Au(111) and Au(100), TERS demonstrates the same chemical nature of FeO by comparable vibrational features. In addition, combined TERS and STM measurements identify a unique wrinkled FeO structure on Au(100), which is correlated to the reassembly of the intrinsic Au(100) surface reconstruction due to FeO deposition. Beyond revealing the morphologies of ultrathin FeO on Au substrates, our study provides a thorough understanding of the local interfacial properties and interactions of FeO on Au, which could shed light on the rational design of metal-supported FeO catalysts. Furthermore, this work demonstrates the promising utility of combined TERS and STM in chemically probing the structural properties of metal-supported ultrathin oxides on the nanoscale.

Nanoscale Chemical Analysis of Thin Film Solar Cell Interfaces Using Tip-Enhanced Raman Spectroscopy.

Interfacial regions play a key role in determining the overall power conversion efficiency of thin film solar cells. However, the nanoscale investigation of thin film interfaces using conventional analytical tools is challenging due to a lack of required sensitivity and spatial resolution. Here, we surmount these obstacles using tip-enhanced Raman spectroscopy (TERS) and apply it to investigate the absorber (Sb2Se3) and buffer (CdS) layers interface in a Sb2Se3-based thin film solar cell. Hyperspectral TERS imaging with 10 nm spatial resolution reveals that the investigated interface between the absorber and buffer layers is far from uniform, as TERS analysis detects an intermixing of chemical compounds instead of a sharp demarcation between the CdS and Sb2Se3 layers. Intriguingly, this interface, comprising both Sb2Se3 and CdS compounds, exhibits an unexpectedly large thickness of 295 ± 70 nm attributable to the roughness of the Sb2Se3 layer. Furthermore, TERS measurements provide compelling evidence of CdS penetration into the Sb2Se3 layer, likely resulting from unwanted reactions on the absorber surface during chemical bath deposition. Notably, the coexistence of ZnO, which serves as the uppermost conducting layer, and CdS within the Sb2Se3-rich region has been experimentally confirmed for the first time. This study underscores TERS as a promising nanoscale technique to investigate thin film inorganic solar cell interfaces, offering novel insights into intricate interface structures and compound intermixing.

Mechanistic Understanding of Oxygen Activation on Bulk Au(111) Surface Using Tip‐Enhanced Raman Spectroscopy

AbstractGaining mechanistic understanding of oxygen activation on metal surfaces is a topical area of research in surface science. However, direct investigation of on‐surface oxidation processes at the nanoscale and the empirical validation of oxygen activation pathways remain challenging for the conventional analytical tools. In this study, we applied tip‐enhanced Raman spectroscopy (TERS) to gain mechanistic insights into oxygen activation on bulk Au(111) surface. Specifically, oxidation of 4‐aminothiophenol (4‐ATP) to 4‐nitrothiophenol (4‐NTP) on Au(111) surface was investigated using hyperspectral TERS imaging. Nanoscale TERS images revealed a markedly higher oxidation efficiency in disordered 4‐ATP adlayers compared to the ordered adlayers signifying that the oxidation of 4‐ATP molecules proceeds via interaction with the on‐surface oxidative species. These results were further validated via direct oxidation of the 4‐ATP adlayers with H2O2 solution. Finally, TERS measurements of oxidized 4‐ATP adlayers in the presence of H2O18 provided the first empirical evidence for the generation of oxidative species on bulk Au(111) surface via water‐mediated activation of molecular oxygen. This study expands our mechanistic understanding of oxidation chemistry on bulk Au surface by elucidating the oxygen activation pathway.

Electrochemical Tip-Enhanced Raman Spectroscopy for the Elucidation of Complex Electrochemical Reactions

Electrochemical Tip-Enhanced Raman Spectroscopy for the Elucidation of Complex Electrochemical Reactions

Electro-optical properties of a graphene device on a tip-enhanced Raman spectroscopy system.

This paper investigates the impact of graphene on tip-enhanced Raman spectroscopy (TERS) by developing an electromagnetic characterization of the TERS-graphene device system. The study focuses on the interaction between the tip, the gate voltage, and the sample, specifically examining the electromagnetic effects in the system. Employing a finite element method (FEM)-based simulation model, we meticulously dissect the electric field distribution and the Raman amplification when graphene is introduced into the system. Our findings reveal that including graphene results in a marginal reduction in Raman amplification and a negligible variation in the induced charges within the system. To reinforce our simulations, we employ a simplified capacitor model, which corroborates our results, showcasing negligible induced charges and validating the obtained capacitance values. In this manuscript, we also explore the influence of the setup on the electro-optical properties of graphene, revealing a slight variation in conductivity despite strong changes in chemical potential. Overall, this work contributes to understanding TERS's electromagnetic aspects in the presence of graphene.

Photoluminescence emission and Raman enhancement in TERS: an experimental and analytic revisiting

Abstract An analytic model is used to calculate the Raman and fluorescence enhancement of a molecule in between two closely spaced gold nanospheres. Instead of using the conventional approach that only the dipolar plasmonic mode is considered, we calculate the electric field enhancement in the nanometre sized gap, by taking account of the higher order modes in one gold sphere, which couples to the dipolar mode of the other sphere. The experimental confirmation is performed by gap-dependent tip-enhanced Raman spectroscopy (TERS) measurements. The photoluminescence and Raman enhancement are both observed with different growing trends as the gap width decreases. Red-shift of the background spectra is observed and implies the increasing coupling between the nanospheres. This analytic model is shown to be able to interpret the enhancement mechanisms underlying gap-dependent TERS experimental results.