Time Domain Passivity Control Research Articles

Time Domain Passivity Control for Position-Position Teleoperation Architectures

This article presents a method for passivating the communication channel of a symmetric position-position teleoperation architecture on the time domain. The time domain passivity control approach has recently gained appeal in the context of timedelayed teleoperation because passivity is not established as a design constraint, which often forces conservative rules, but rather as a property which the system must preserve during operation. Since passivity is a network property, the first design rule within this framework is to represent consistent and comprehensible circuit (i.e., network) representations of the mechanical teleoperation system. In particular, the energetic behavior of these networks is interesting because it allows straightforward conclusions about system stability. By means of so-called passivity observers (PO) and passivity controllers (PC) (Hannaford & Ryu, 2001), the energetic response of a delayed communication channel is captured and modulated over time so that the network in question never becomes nonpassive. The case analyzed in this paper tackles a communication channel that conveys position data back and forth. This type of channel does not offer intuitive network representation since only flows are actually being transmitted. Although energy clearly travels from one side to the other, port power identification, as defined by the correlated pair flow and effort, is not evident. This work first investigates how this kind of channel can be represented by means of circuit networks even with the lack of physical effort being transmitted through the channel, and identifies which networks are susceptible to become nonpassive due to the channel characteristics (i.e., time delay, discretization or package loss). Once achieved, a distributed control structure is presented based on a PC series that keeps the system at the verge of passivity (and therefore stability) independent from the channel properties. The results obtained by the simulation and by experiment sustain the presented approach.

Humanoid Robot System, HanSaRam-VII for RoboMarathon in HuroCup

This paper presents the recent development of small-sized humanoid robot, HSR (HanSaRam)-VII, which is developed to participate in HuroCup which is one of the game categories of FIRA (www.FIRA.net). As HuroCup is composed of seven kinds of competitions, humanoid robots participating in this league have to be capable of various tasks such as weight lifting, basketball, marathon, etc. HSR-VII is designed to have high degrees of freedom, distributed planner-reactor architecture using PDA and embedded computer. This distributed control architecture includes vision processing, navigation and on-line walking pattern generation algorithm. In addition, time-domain passivity control algorithm is introduced to guarantee the stable walking pattern generation. The performance of the system is demonstrated through the RoboMarathon.

Landing Force Control for Humanoid Robot by Time-Domain Passivity Approach

This paper proposes a control method to absorb the landing force or the ground reaction force for a stable dynamic walking of a humanoid robot. Humanoid robot may become unstable during walking due to the impulsive contact force of the sudden landing of its foot. Therefore, a control method to decrease the landing force is required. In this paper, time-domain passivity control approach is applied for this purpose. Ground and the foot of the robot are modeled as two one-port network systems that are connected, and exchange energy with each other. The time-domain passivity controller with admittance causality is implemented, which has the landing force as input and foot's position to trim off the force as output. The proposed landing force controller can enhance the stability of the walking robot from simple computation. The small-sized humanoid robot, HanSaRam-VII that has 27 DOFs, is developed to verify the proposed scheme through dynamic walking experiments.

변형 가능한 작업환경에 대한 시간영역 수동제어 방법

Recently proposed control scheme for a stable teleoperation, which was based on two-port time-domain passivity approach[21], has been successful for a contact with high stiffness environments. However, we found several conservatisms during the contact with deformable environments and unconstrained motion. The two-port time-domain passivity controller was excessively dissipating energy even though it was not necessary for some cases of an unconstrained motion and soft contact. The main reason of those conservatisms was on the fact that the two-port time-domain passivity controller was activated without considering the amount of energy dissipation at the master and slave manipulators. Especially, the exclusion of the slave manipulator from the two-port was the dominant reason of the conservatisms. In this paper, we consider the amount of energy dissipation at slave manipulator for designing the time-domain passivity observer and controller. The measured interaction force between slave manipulator and environment allow the time-domain passivity observer to include the amount of energy dissipation at the slave manipulator. Based on the modified passivity observer, reference energy following method[24] is applied to satisfy the passivity condition in real-time. The feasibility of the developed methods is proved with experiments. Improved performance is obtained for an interaction with deformable environments and an unconstrained motion.

시간영역 수동제어기의 미세떨림현상 제거

A noisy behavior of the time domain passivity controller during the period of low velocity is analyzed. Main reasons of the noisy behavior are investigated through a simulation with a one-DOF (Degree of Freedom) haptic interface model. It is shown that the PO/PC is ineffective in dissipating the produced energy when the sign of the velocity, which is numerically calculated from the measured position, is suddenly changed, and when this velocity is zero. These cases happen during the period of low velocity due to the limited resolution of the position sensor. New methods, ignoring the produced energy from the velocity sign change, and holding the control force while the velocity is zero, are proposed for removing the noisy behavior. The feasibility of the developed methods is proved with both a simulation and a real experiment.

Time domain passivity control with reference energy following

A recently proposed method for stabilizing haptic interfaces and teleoperation systems was tested with a PHANToM commercial haptic device. The passivity observer (PO) and passivity controller (PC) stabilization method was applied to stabilize the system but also excited a high-frequency mode in the device. To solve this problem, we propose a method to use a time-varying desired energy threshold instead of fixed zero energy threshold for the PO, and make the actual energy input follow the time-varying energy threshold. With the time-varying energy threshold, we make the PC control action smooth without sudden impulsive behavior by distributing the dissipation. The proposed new PO/PC approach is applied to PHANToM with high stiffness (K=5000N/m), and stable and smooth contact is guaranteed. Resetting and active environment display problems also can be solved with the reference energy following idea.

A simulation/experimental study of the noisy behavior of the time-domain passivity controller

A noisy behavior of the time-domain passivity controller during the period of low velocity is analyzed. Main reasons of the noisy behavior are investigated through a simulation with a one-DOF haptic interface model. It is shown that the PO/PC is ineffective in dissipating the produced energy when the sign of the velocity, which is numerically calculated from the measured position, is suddenly changed, and when this velocity is zero. These cases happen during the period of low velocity due to the limited resolution of the position sensor. New methods, ignoring the produced energy from the velocity sign change, and holding the control force while the velocity is zero, are proposed for removing the noisy behavior. The feasibility of the developed methods is proved with both a simulation and a real experiment.

Stability Guaranteed Control: Time Domain Passivity Approach

A general framework for expanding the time-domain passivity control approach, to large classes of control systems is proposed. We show that large classes of control systems can be described from a network point of view. Based on the network presentation, the large classes of control systems are analyzed in a unified framework. In this unified network model, we define input energy, which is a virtual source of for control, and real output energy that is physically transferred to a plant to allow the concept of passivity to be used to study the stability of large classes of control systems. For guaranteeing the stability condition, the time-domain passivity controller for two-port is applied. Design procedure is demonstrated for a motion control system. The developed method is tested with numerical simulation in the regulation of a single link flexible manipulator. Totally stable control is achieved under wide variety of operating condition and uncertainties without any model information.