Time-dependent Density Functional Theory Approach Research Articles

Two-Photon Absorption Strengths of Small Molecules: Reference CC3 Values and Benchmarks.

We present a large dataset of highly accurate two-photon transition strengths (δTPA) determined for standard small molecules. Our reference values have been calculated using the quadratic response implementation of the third-order coupled cluster method including iterative triples (Q-CC3). The aug-cc-pVTZ atomic basis set is used for molecules with up to five non-hydrogen atoms, while larger molecules are assessed with aug-cc-pVDZ; the differences due to the basis sets are discussed. This dataset, encompassing 82 singlet transitions of various characters (Rydberg, valence, and double excitations), enables a comprehensive benchmark of smaller basis sets and alternative wavefunction methods when Q-CC3 calculations become beyond reach as well as time-dependent density functional theory (TD-DFT) approaches. The evaluated wavefunction methods include quadratic response and equation-of-motion CCSD approximations, Q-CC2, and second-order algebraic diagrammatic construction in its intermediate state representation (I-ADC2). In the TD-DFT framework, a set of five commonly used exchange-correlation functionals are evaluted. This extensive analysis provides a quantitative assessment of these methods, revealing how different system sizes, response intensities, and types of transitions affect their performances.

Crystal Growth, Structural Elucidation, Chemical Reactivity, Topology Exploration (ELF, LOL, AIM, RDG) and NLO Activity of 4-Cumyl Phenol Crystal Using Quantum Chemical Calculation

The main objective of the study is to analyze the structural behavior and NLO activity of 4-cumyl phenol by experimental and theoretical spectroscopic techniques. Its computational result is compared with the cumene compound. The optimized structural parameters of the title compound were computationally obtained at the B3LYP/6-31G (d, p) basis set. The fundamental modes of vibration were examined by experimental FT-IR, and FT-Raman techniques. The distribution of the vibrational bands was carried out with the help of normal coordinate analysis (NCA). The resulting harmonic wavenumbers were scaled by using NCA method. Topological analysis, such as Electron localization function (ELF), natural bond orbital analysis (NBO), reduced density gradient (RDG) and atoms in molecule (AIM) analysis, molecular electrostatic potential (MEP) have been used to evaluate the intermolecular interaction, especially the hydrogen bonds. UV-visible spectrum of the compound was recorded in the region 200–900 nm and the electronic properties and HOMO-LUMO energies were calculated by time dependent density functional theory approach.

Tuning optoelectronic properties of indandione-based D-A materials by malononitrile group acceptors: A DFT and TD-DFT approach.

Indandione-based materials are promising candidates for organic electronics, offering high electron mobility and tunable optoelectronic properties. In this study, we explore the optoelectronic and photovoltaic properties of indandione-based donor-acceptor (D-A) materials, specifically (R1) and (R2), by introducing malononitrile group acceptors into their molecular structure. These strong electron-withdrawing acceptors are designed to enhance charge transfer and overall material performance. The designed molecules (DM1-DM4) exhibit a low optical band gap of approximately 1.77eV, significantly lower than the reference materials (R1 and R2) at around 2.24eV in a solvent environment. Among the designed molecules, DM4 stands out with superior photovoltaic parameters, including a narrow optical band gap (1.77eV), higher electron affinity (3.49eV), an extended excited state lifetime (10.0ns) owing to its low electron and hole reorganization energies (λe ~ 0.13eV and λh ~ 0.24eV), and improved short-circuit current density (Jsc) of ~ 15.73mA/cm2. Notably, DM4 achieves a power conversion efficiency (PCE) of ~ 18.5%, making it an excellent candidate for device applications. A comprehensive computational investigation was carried out on indandione-based D-A materials with malononitrile group acceptors (DM1-DM4) using density functional theory (DFT) and time-dependent DFT (TD-DFT) methods, as implemented in Gaussian 16 software. We examined the electronic and optical properties of the proposed molecules through frontier molecular orbital (FMO) analysis, UV-Vis absorption spectra, density of states (DOS), exciton binding energy (Eb), and transition density matrix (TDM) analysis, utilizing GaussView 6.0 and Multiwfn 3.8 software. The photovoltaic parameters and power conversion efficiency (PCE) were evaluated using the Scharber and Alharbi models.

Synthesis, Crystal Structure, and Theoretical Screening of Solvatochromism and Light-Harvesting Performance of Hexamine V-Substituted Lindqvist-Based Photosensitizer for Photovoltaic Solar Cells.

In this paper, we employ density functional theory (DFT) and time-dependent DFT (TD-DFT) approaches to predict the solvatochromism and light-harvesting properties of a newly synthesized hybrid hexamine (HMTA) vanadium-substituted Lindqvist-type (V 2 W 4 ) polyoxometalate (POM), (C7H15N4O)2(C6H13N4)2[V2W4O19]·6H2O, (HMTA-V 2 W 4 ) for application in dye-sensitized solar cells (DSSCs). Single crystal X-ray diffraction (XRD) and noncovalent interaction (NCI) analyses show a 3D-supramolecular packing stabilized by means of hydrogen bonds and van der Waals (vdW) and ionic interactions between highly nucleophilic cage-like HMTA surfactant, lattice water, and electrophilic V 2 W 4 polyanions. Experimental and theoretical UV/vis absorption spectra show large absorption in the visible region, which is strongly solvent polarity dependent. This solvatochromic behavior can be attributed to hydrogen bonding interactions between the V 2 W 4 polyanion and protic solvents. Furthermore, the energy level of semiconductor-like nature of HMTA-V 2 W 4 with high LUMO level matches well with the conduction band (CB) of TiO2, which is beneficial for the photovoltaic device performance. The photovoltaic empirical parameters are theoretically predicted to demonstrate a remarkably high open-circuit voltage (Voc) value (1.805 eV) and a photoelectric conversion efficiency (PCE) value up to 8.7% (FF = 0.88) along with superior light-harvesting efficiency (LHE) (0.7921), and therefore, the studied compound is expected to be a potential candidate as a photosensitizer dye for applications in DSSCs. The aim of this work was to broaden the range of applications of POMs, owing to their low-cost fabrication, leveraging and flourishing optoelectronic properties, and ever-improving efficiency and stability for use in future technology pointed to the development of clean and green renewable energy sources to solve the current energy crisis.

Investigation of the molecular structure of CHBP, biological activities and SARS-CoV-2 protein binding interaction by molecular and biomolecular spectroscopy approaches

The objective of this investigation is to learn more about the structural, electrical, spectroscopic, and physiochemical characteristics of biologically active cyano-4′-hydroxybiphenyl (CHBP). The title molecule’s optimized conformational analysis was computed using the DFT/B3LYP/6–311++G (d, p) level of theory. The observed wavenumbers were compared with theoretical FT-IR and FT-Raman spectra. 1H and 13C NMR experimental spectra in CDCl3 solution (solvent phase) were recorded and the chemical shift was calculated. NBO analysis was used to examine the transfer of charge as well as the intermolecular and intramolecular bonding of orbitals. The TD-DFT (time-dependent DFT) approach was used to estimate theoretical values for both the gas and solvent (ethanol) in the corresponding transitional research, which was conducted using UV–Vis’s spectra. Energy gap (Eg = 0.26764 eV) implies that the strong potential for charge transfer, and the stability of the CHBP compound. CHBP compound’s has bioactive nature, its drug-likeness and biological properties were evaluated. The predicted topological polar surface area of 44.02 \\AA2 for the molecule falls within the permissible range of < 140 \\AA2. Based on the docking results, the most stable docking score value is −6.84 kcal/mol. In that interaction, MET 165 affects both phenyl rings in a pi-sulphur fashion and a single bond hydrogen with protein moieties GLN 192. This suggests that the pi-alkyl in PRO 168 is a hydroxyl substitutional ring. Our findings demonstrate the CHBP compound is a good inhibitor against the SAR COVID-19 viral protein.

Exploring the Cs[formula omitted]LiLuCl[formula omitted] elpasolite scintillator for thermal-neutron detection: A comprehensive DFT and TD-DFT studies

In this study, we investigate the halide perovskite material Cs2LiLuCl6 using both density functional theory (DFT) and time-dependent density functional theory (TD-DFT) approaches. Our analysis focuses on the structural, electronic, and optical properties of the material, conducted with the Quantum Espresso code. In order to confirm the structural stability of the material, we performed various tests including analysis of elastic constants, formation energy, tolerance factor, and phonon dispersion. Employing the generalized gradient approximation (GGA) and GGA+U, we determine that the material behaves as an insulator with a direct band gap of 5.3042 eV and 5.4245 eV, respectively. Additionally, DFT+U calculations were performed to study the dielectric function, reflectivity, absorption coefficient, and refractive index, revealing a high transmittance rate exceeding 90%. Under ideal conditions, the upper light yield (LYsc) is estimated to be 75411 ph/MeV and 73739 ph/MeV for the DFT and DFT+U methods, respectively. These results, along with the presence of lithium in Cs2LiLuCl6, highlight its potential for use in scintillation-based thermal-neutron detection applications.

New conjugated copolymer MEH-PPV-P3HT with donor-acceptor system for organic optoelectronics applications: Experimental and theoretical study

Donor-acceptor architecture was designed of new diblocks copolymer MEH-PPV-P3HT synthesis. The new copolymer was elaborated through oxidative pathway. The correlation structure-properties and their potential photophysical characteristics of the obtained material were reported utilizing several characterization analyses (InfraRed, Raman, TGA, UV visible spectroscopy, as well as PL and TRPL). To define the model's geometric structure, vibrational, and optoelectronic properties of the studied copolymer, Density Functional Theory DFT and Time-dependent Density Functional Theory TD-DFT approach were carried out. The obtained copolymer exhibits great thermal stability and substantial absorption in the visible range. An energy gap lower than the original materials by the amount of 1.74 eV which proves the presence of the charge transfer process. In addition, due to Forster energy transfer from the MEH-PPV to the P3HT an enhancement of the exciton average lifetime was detected. The obtained results from the copolymer characterization suggest a potential for application in organic optoelectronic devices. A good accordance between experimental and theoretical results based DFT calculations is obtained.

Real-Time Simulation of Ultrafast Electronic Dynamics of Nanoscale Systems Involving an Organic Molecule and a Nanoparticle Dimer.

Understanding and predicting the behavior of nanomaterials composed of plasmons interacting with quantum emitters at ultrafast timescales is crucial for the better manipulation of light at the nanoscale and advancing technologies like ultrafast communication and computing. Here we perform a simulation of the "real-time" electronic dynamics of a coupled molecule-metal nanoparticle dimer interacting with an ultrashort resonant laser pulse by combining the real-time time-dependent density functional theory (RT-TDDFT) approach with the time-domain frequency-dependent fluctuating charge (TD-ωFQ) model, an atomistic electromagnetic (AEM) model for the dynamic plasmonic response of nanoparticles. It is shown that the induced dipoles evolve from an exponential decay pattern to a beat pattern with an increase in coupling strength, which is altered by changing the molecular orientation relative to the dimer axis. It is further shown that in the strong coupling regime, both the excited molecule and the plasmon relax rapidly due to the molecule-plasmon interaction, and the efficient coherent energy exchange between the interacting molecule and plasmon modes occurs on a femtosecond (fs) timescale. This work provides guidance on manipulating light-matter interaction and studying molecular plasmonics at extremely fast timescales.

Theoretical, structural, and electronic analyses of pyridin-based dyes for dye-sensitized solar cells applications.

The new series of donor-π-acceptor dyes have been designed using pyridine derivatives as a donor group and thienothiophene as a π-spacer group, which were linked via 10acceptor groups. The highest occupied molecular orbital energies range from - 6.177 to - 5.786eV, whereas the lowest unoccupied molecular orbital energies range from - 2.181 to - 3.664eV. A6 dye has smaller energy gap, lower hardness, higher electrophilicity index, and good photovoltaic performance than other sensitizers. The lowest dihedral angle is observed in A1, A2, A6, A7, and A8 which are appropriate for intramolecular charge transfer between the molecules. The A8 has higher light harvesting efficiency, which increases the photovoltaic efficiency of the designed dye. The A6, A7, and A8 dyes spend less time in the excited state, which means they emit photons more efficiently than other dyes. The interaction between donor to π-spacer (red line) parts of the dyes has the bonding interaction (positive), and π-spacer to acceptor (blue line) parts of the dyes have the bonding and antibonding (negative) behaviours. The dyes A5 and A9 have 305.79 and 357.71 times higher β0 values than urea (0.781 × 10-30 esu) molecules. The spectral properties of the A6 dye strongly affect the structural modification. The density functional theory (DFT) and time-dependent DFT (TD-DFT) approach B3LYP/6-311G (d,p) basic set were used to optimize the designed dyes. All the calculations are performed using Gauss view 6.0 and Gaussian 09 software. The density of state spectrum is plotted using Gauss sum 2.6.

Time-dependent Kohn-Sham electron dynamics coupled with nonequilibrium plasmonic response via atomistic electromagnetic model.

Computational modeling of plasmon-mediated molecular photophysical and photochemical behaviors can help us better understand and tune the bound molecular properties and reactivity and make better decisions to design and control nanostructures. However, computational investigations of coupled plasmon-molecule systems are challenging due to the lack of accurate and efficient protocols to simulate these systems. Here, we present a hybrid scheme by combining the real-time time-dependent density functional theory (RT-TDDFT) approach with the time-domain frequency dependent fluctuating charge (TD-ωFQ) model. At first, we transform ωFQ in the frequency-domain, an atomistic electromagnetic model for the plasmonic response of plasmonic metal nanoparticles (PMNPs), into the time-domain and derive its equation-of-motion formulation. The TD-ωFQ introduces the nonequilibrium plasmonic response of PMNPs and atomistic interactions to the electronic excitation of the quantum mechanical (QM) region. Then, we combine TD-ωFQ with RT-TDDFT. The derived RT-TDDFT/TD-ωFQ scheme allows us to effectively simulate the plasmon-mediated "real-time" electronic dynamics and even the coupled electron-nuclear dynamics by combining them with the nuclear dynamics approaches. As a first application of the RT-TDDFT/TD-ωFQ method, we study the nonradiative decay rate and plasmon-enhanced absorption spectra of two small molecules in the proximity of sodium MNPs. Thanks to the atomistic nature of the ωFQ model, the edge effect of MNP on absorption enhancement has also been investigated and unveiled.

Exploration of promising photovoltaic properties of bisisoindigo-based heterocyclic chromophores for organic solar cells: A DFT/TD-DFT study

In the current study, a series of A1–π–A2–π–A1 type bisisoindigo-based organic compounds (BTIND1–BTIND9) were designed via the structural tailoring of the reference compound (BTINR) at terminal acceptors for the organic solar cells (OSCs). Density functional theory (DFT) and time-dependent density functional theory (TD-DFT) approaches were utilized to estimate the influence of end-capped engineering over their photovoltaic properties of BTIND1–BTIND9. After their structural optimization, various analyses like, open circuit voltage (Voc), absorption spectra (λmax), frontier molecular orbitals (FMOs), density of states (DOS), binding energy (Eb) and transition density matrix (TDM) were performed at the B3LYP/6-311G(d,p) level. The band gaps range of the engineered molecules was observed as 1.776–1.649 eV, lesser than the BTINR reference (1.812 eV). Their TDM and DOS details further revealed electronic charge transfer in the designed derivatives. The higher λmax values were found in the visible and near-infrared regions i.e., 666.904–701.149 nm in the chloroform solvent and 661.778–895.581 nm in the gaseous phase. Furthermore, their open-circuit voltage (Voc) was determined with PTB7 donor polymer and showed significant values. Among all, BTIND5, BTIND7 and BTIND8 compounds were investigated with remarkable photovoltaic properties. These chromophores possessed least energy gaps (1.649, 1.668 and 1.664 eV) and bathochromic shifts (698.070, 699.646 and 701.149 nm) with least binding energies and prominent Voc results. The above-mentioned outcomes demonstrate that the end-capped modification of bisisoindigo-based molecule is an effective strategy to obtain highly efficient OSCs.

Influence of Solvents and Halogenation on ESIPT of Benzimidazole Derivatives for Designing Turn-on Fluorescence Probes.

This work reports a theoretical investigation of the solvent polarity as well as the halogenation of benzimidazole derivatives during excited state intramolecular proton transfer (ESIPT). It details how the environment and halogen substitution may contribute to the efficiency of ESIPT upon keto-enol tautomerism and exploits this effect to design fluorescence sensing. For this purpose, we first examine the conformational equilibrium of benzimidazole derivatives containing different halogen atoms, which results in intramolecular proton transfer, using density-functional theory (DFT) combined with the polarizable continuum model (PCM). Then we evaluate the fluorescence of the benzimidazole derivatives in different dielectric constants within time-dependent DFT (TD-DFT) approaches. Our results quantitatively allow the determination of large Stokes shifts in nonpolar solvents around 100 nm. These theoretical results are in agreement with experimental solvatochromism studies of benzimidazoles. The effect of halogenation, with fluorine, chlorine, and bromine, is less important than solvent polarization when ESIPT takes place. Thus, halogenation can be properly chosen depending on the interest of the synthesis of benzimidazole-based turn-on fluorescence in appropriate solvents.

Orbital-Optimized Versus Time-Dependent Density Functional Calculations of Intramolecular Charge Transfer Excited States.

The performance of time-independent, orbital-optimized calculations of excited states is assessed with respect to charge transfer excitations in organic molecules in comparison to the linear-response time-dependent density functional theory (TD-DFT) approach. A direct optimization method to converge on saddle points of the electronic energy surface is used to carry out calculations with the local density approximation (LDA) and the generalized gradient approximation (GGA) functionals PBE and BLYP for a set of 27 excitations in 15 molecules. The time-independent approach is fully variational and provides a relaxed excited state electron density from which the extent of charge transfer is quantified. The TD-DFT calculations are generally found to provide larger charge transfer distances compared to the orbital-optimized calculations, even when including orbital relaxation effects with the Z-vector method. While the error on the excitation energy relative to theoretical best estimates is found to increase with the extent of charge transfer up to ca. -2 eV for TD-DFT, no correlation is observed for the orbital-optimized approach. The orbital-optimized calculations with the LDA and the GGA functionals provide a mean absolute error of ∼0.7 eV, outperforming TD-DFT with both local and global hybrid functionals for excitations with a long-range charge transfer character. Orbital-optimized calculations with the global hybrid functional B3LYP and the range-separated hybrid functional CAM-B3LYP on a selection of states with short- and long-range charge transfer indicate that inclusion of exact exchange has a small effect on the charge transfer distance, while it significantly improves the excitation energy, with the best-performing functional CAM-B3LYP providing an absolute error typically around 0.15 eV.

Effect of spirocyclization of xanthene dyes on linear and nonlinear optical properties by considering D-π-A and D-A-D Systems: DFT and TD-DFT approach

Spirocyclization, a unique feature of xanthene dyes, makes it a promising candidate for developing fluorescent ratiometric probes for sensing, imaging, tracking, and labeling. How will this feature of xanthene dyes influence the linear and nonlinear optical properties? To examine the effect of spirocyclization of xanthene dyes, we have selected both the open-close form of rhodamine B and π-extended xanthene dyes substituted with thienyl and thieno[3,2-b]thienyl group at position 3 and 6. Here, rhodamine B will serve as the (Donor)D-π-A(Acceptor) system and thiophene-substituted xanthene dyes will serve as the D-A-D system. The geometry optimization of the close-open form of xanthene dyes at B3LYP/6–311++G(d,p) and CAM-B3LYP/6–311++G(d,p) revealed that the open form is energetically more stable in the S0 state than the closed form. The vertical excitation energy (ΔE), from Time-Dependent-Density Functional Theory (TD-DFT) calculation at B3LYP/6–311++G(d,p), CAM-B3LYP/6–311++G(d,p), ωB97XD/6–311++G(d,p) revealed that (ΔE)open < (ΔE)close. Further, the open form of xanthene dyes displays red-shifted absorption compared to the closed form. The λVt of xanthene dyes (open-close forms) is mainly assigned to HOMO → LUMO transition (S0 → S1) with % orbital contribution for open form ∼ 90 % and close form ∼ 60 %. The oscillator strength of xanthene dyes is obtained in the range of 0.01 – 1.74. The λVt of xanthene dyes is in agreement with experimental absorption. The static polarizability (α0), first-order hyperpolarizability (β0), second-order hyperpolarizability (γ), molecular hyperpolarizability (µβ0), and frequency-dependent hyperpolarizability (β1064), of the open form of xanthene dyes, were found to be higher than the close form. Thus, the open form of xanthene dyes will show superior linear and nonlinear optical properties than the closed form. The thienyl[3, 2-b] thieno substituted xanthene dye with red-shifted absorption shows higher α0, β0, γ, µβ0, β1064, and γ values, show better linear and NLO properties than thienyl and diethylamine substituted xanthene dyes.

Synthesis, solvent role, absorption and emission studies of cytosine derivative

The (E)-4-((4-hydroxy-3-methoxy-5-nitrobenzylidene) amino) pyrimidin-2(1H)-one (C5NV) was synthesized from cytosine and 5-nitrovanilline by simple straightforward condensation reaction. The structural characteristics of the compound was determined and optimized by WB97XD/cc-pVDZ basis set. The vibrational frequencies were computed and subsequently compared to the experimental frequencies. We investiated the electronic properties of the synthesized compound in gas and solvent phases using the time-dependent density functional theory (TD-DFT) approach, and compared them to experimental values. The fluorescence study showed three different wavelengths indicating the nature of the optical material properties. Frontier molecular orbital (FMO) and molecular electrostatic potential (MEP) analyses were conducted for the title compound, and electron localized functions (ELF) and localized orbital locators (LOL) were used to identify the orbital positions of localized and delocalized atoms. Non-covalent interactions (H-bond interactions) were investigated using reduced density gradients (RDGs). The objective of the study was to determine the physical, chemical, and biological properties of the C5NV. The molecular docking study was conducted between C5NV and 2XNF protein, its lowest binding energy score is −7.92 kcal/mol.

Adjusting UV-Vis Spectrum of Alizarin by Insertion of Auxochromes.

First synthesized in 1868, alizarin became one of the first synthetic dyes and was widely used as a red dye in the textile industry, making it more affordable and readily available than the traditional red dyes derived from natural sources. Despite extensive both experimental and computational analyses on the electronic effects of substituents on the shape of the visible spectrum of alizarin and alizarin Red S, no previous systematic work has been undertaken with the aim to fine tune the dominant absorption region defining its color by introducing other electron-withdrawing or electron-donor groups. For such, we have performed a comprehensive study of electronic effects of substituents in position C3 of alizarin by means of a time dependent DFT approach. These auxochromes attached to the chromophore are proven to alter both the wavelength and intensity of absorption. It is shown that the introduction of an electron-donor group in alizarin causes the transition bands to be significantly red-shifted whereas electron-withdrawing groups cause a minor blue-shifting.

Geometrical factor, bond order analysis, vibrational energies, electronic properties (gas and solvent phases), topological and molecular docking analysis on Ipriflavone-osteoporosis diseases

Abstract In this research project, a computational assessment of the molecular structure of Ipriflavone (IP) in the gaseous phase was done based on density functional theory (DFT). In the realm of theory, the standard basis set B3LYP is a collection of functions used with linear combinations to produce molecular orbitals, making it simple to compute the molecular structure related to the given compound. With the time-dependent DFT approach, the UV spectra obtained for various solvents were used for examining the electronic transport features. A three-dimensional representation of the molecules that shows the charge distributions and charge-related characteristics of the molecule has the acronym the electrostatic potential map. The frontier molecular orbitals (FMO) confirmed the compound’s stability and good reactivity. Hyperpolarizability calculations were performed with good non-linear optical (NLO) potent. Natural bond orbital (NBO) analysis was used to explore charge delocalization and the compound’s stability. Topological investigations have been identified to clarify the bonding zones, weakest contacts, and electron energy density. Drug likeness studies were used to promote bioactivities. The outcome of docking tests shows that the ligand under investigation is beneficial at preventing bone loss-osteoporosis. To sum up, this work provides a comprehensive analysis that combines spectroscopic and quantum computational techniques to assess the effect of specific medicinal compounds on solvation and metabolic activity. Strategies for subsequent studies can thus greatly benefit from the knowledge obtained.

Structural tailoring via end-capped acceptors of thiophene-based C-shaped non-fullerene compounds with A-π-A backbone for the exploration of photovoltaic response

In the current era, non-fullerene based electron acceptors show remarkable contribution to develop organic solar cells (OSCs) with maximum possible efficiency via improving their optoelectronic properties. Thus, in current report, eight novel A-π-A type dithieno[3,2-b:2′,3′-d]thiophene (DTh) core-based C-shaped non-fullerene acceptors (ETMM1–ETMM8) were designed theoretically by taking ETMMR as reference to achieve highly proficient photovoltaic materials. Hence, a comprehensive density functional theory (DFT) analysis was accomplished by employing B3LYP level in conjunction with 6-311G(d,p) basis set to determine the enhancement of optical as well as photochemical response. Whereas time-dependent density functional theory (TD-DFT) approach was used for excited state calculations of all the investigated chromophores (ETMMR and ETMM1–ETMM8). So, the influence of structural tailoring via end-capped acceptors modifications was explored by utilizing various quantum chemical analyses such as: transition density matrix (TDM), HOMO–LUMO band gap, density of states (DOS), UV–Vis, binding energy (Eb), global reactivity parameters (GRPs), molecular electrostatic potential (MEP) and open circuit voltage (Voc). Remarkably, all the derivatives (ETMM1–ETMM8) exhibited comparable results with that of the reference chromophore (ETMMR). The results of UV–Vis analysis in chloroform solvent fall in the following order for all the modified chromophores: ETMM5 > ETMM3 > ETMM8 > ETMM4 > ETMM7 > ETMM2 > ETMM6 > ETMM1, which demonstrated maximum red shift in ETMM5 (785.257 eV). Fascinatingly, lowest excitation energy (1.579 eV) as well as binding energy (0.319 eV) along with minimum HOMO/LUMO band gap (1.898 eV) suggested ETMM5 as an excellent candidate for high performance OSCs. Concludingly, all the results indicated that modification of end-capped acceptors is an effective alternative approach to obtain desirable optoelectronic properties.

Wigner-Seitz truncated time-dependent density functional theory approach for the calculation of exciton binding energies in solids

Wigner-Seitz truncated time-dependent density functional theory approach for the calculation of exciton binding energies in solids

A theoretical study of ferrocene based on combined configuration interaction singles (CIS) and time-dependent density functional theory (TDDFT) approach

The state-of-the art density functional theory (DFT) is used to clearly resolve the two parallel cyclopentadienyl rings of ferrocene, which are either staggered (D5d symmetry) or eclipsed (D5h symmetry), in their ground-state conformation. Present result revealed that the eclipsed conformer with D5h point group represents the true minimum ground state structure of ferrocene. Natural population analysis is used to determine how atomic charge is distributed across different atoms of ferrocene D5h conformer and also the distribution of electrons in the core, valence, and Rydberg sub-shells. It is further investigated in potential energy scan that the rotation of the dihedral angle δ from 0° to 3π/5 will reproduce three times D5h or D5d conformers periodically as the period of 2π/5 due to the pentagonal structure of the CP ring. Further to examine optical spectra in the ultraviolet-visible (UV–vis) range, configuration interaction single (CIS) and time-dependent density functional theory (TDDFT) have conducted which help in locating the significant electronic shifts between different energy levels. Absorption spectra for high spin states were also generated in order to comprehend the characteristics of low-lying spin excitation. According to our estimates, the greatest absorption intensity is restricted to an energy range of 4–6 eV. Knowledge of ferrocene conformers will improve the research on other metallocenes and their derivatives, which have applications in biotechnology, nanotechnology, and solar technology.