Tiller Angle Control Research Articles

Phylogenetic and functional analysis of tiller angle control homeologs in allotetraploid cotton.

Plants can adapt their growth to optimize light capture in competitive environments, with branch angle being a crucial factor influencing plant phenotype and physiology. Decreased branch angles in cereal crops have been shown to enhance productivity in high-density plantings. The Tiller Angle Control (TAC1) gene, known for regulating tiller inclination in rice and corn, has been found to control branch angle in eudicots. Manipulating TAC1 in field crops like cotton offers the potential for improving crop productivity. Using a homolog-based methodology, we examined the distribution of TAC1-related genes in cotton compared to other angiosperms. Furthermore, tissue-specific qPCR analysis unveiled distinct expression patterns of TAC1 genes in various cotton tissues. To silence highly expressed specific TAC1 homeologs in the stem, we applied CRISPR-Cas9 gene editing and Agrobacterium-mediated transformation, followed by genotyping and subsequent phenotypic validation of the mutants. Gene duplication events of TAC1 specific to the Gossypium lineage were identified, with 3 copies in diploid progenitors and 6 copies in allotetraploid cottons. Sequence analysis of the TAC1 homeologs in Gossypium hirsutum revealed divergence from other angiosperms with 1-2 copies, suggesting possible neo- or sub-functionalization for the duplicated copies. These TAC1 homeologs exhibited distinct gene expression patterns in various tissues over developmental time, with elevated expression of A11G109300 and D11G112200, specifically in flowers and stems, respectively. CRISPR-mediated loss of these TAC1 homeologous genes resulted in a reduction in branch angle and altered petiole angles, and a 5 to 10-fold reduction in TAC1 expression in the mutants, confirming their role in controlling branch and petiole angles. This research provides a promising strategy for genetically engineering branch and petiole angles in commercial cotton varieties, potentially leading to increased productivity.

IGT/LAZY genes are differentially influenced by light and required for light-induced change to organ angle

BackgroundPlants adjust their growth orientations primarily in response to light and gravity signals. Considering that the gravity vector is fixed and the angle of light incidence is constantly changing, plants must somehow integrate these signals to establish organ orientation, commonly referred to as gravitropic set-point angle (GSA). The IGT gene family contains known regulators of GSA, including the gene clades LAZY, DEEPER ROOTING (DRO), and TILLER ANGLE CONTROL (TAC).ResultsHere, we investigated the influence of light on different aspects of GSA phenotypes in LAZY and DRO mutants, as well as the influence of known light signaling pathways on IGT gene expression. Phenotypic analysis revealed that LAZY and DRO genes are collectively required for changes in the angle of shoot branch tip and root growth in response to light. Single lazy1 mutant branch tips turn upward in the absence of light and in low light, similar to wild-type, and mimic triple and quadruple IGT mutants in constant light and high-light conditions, while triple and quadruple IGT/LAZY mutants show little to no response to changing light regimes. Further, the expression of IGT/LAZY genes is differentially influenced by daylength, circadian clock, and light signaling.ConclusionsCollectively, the data show that differential expression of LAZY and DRO genes are required to enable plants to alter organ angles in response to light-mediated signals.

Functional characterization of the IGT gene family in wheat reveals conservation and variation in root architecture under drought condition

Plant architecture traits are a pivotal component in crop improvement and one of the key aspects of breeding programs for centuries. Among architecture traits, leaves and roots angle are most important whereas roots angle is considered to play a vital role in plant response to drought avoidance. Several genes regulating drought response reported in plants, such as LAZY1, Deeper Rooting 1 (DRO1), and Tiller angle control 1 (TAC1), belong to the IGT family. The wheat (Triticum aestivum L.) genome is complex because it consists of three subgenomes A, B, and D. A genome-wide (A, B, and D) identification and characterization of IGT family genes in wheat was reported in this study. A total of 12 IGT genes were identified and categorized based on phylogenetic reconstruction and gene structure analysis. These genes were distributed on chromosomes 2, 5, and 6 corresponding to the A, B, and D genomes of wheat. Most of the genes showed similar structures. Cis-regulatory elements in the promoter regions interpreted the presence of light, stress, development, and hormone-related elements. Five miRNAs (tae-miR9773, tae-miR531, tae-miR9678–3p, tae-miR9781, and tae-miR5049–3p) were predicted which target these TaIGT. Both the RNA-seq-based transcriptomic and real-time gene expression analysis suggested that all the genes are strongly expressed in roots, thus showing function conservation. 3D models and molecular docking of TaIGT were also carried out systematically, and binding patterns and the orientation of ligands in the active site of proteins were predicted. This study delves further into TaIGT genes and their expression patterns. The findings of this work are important for understanding the molecular control of root development and for future functional characterization of wheat root architecture genes. Key messageIGT gene family has not been identified and characterized and we identified 12 genes strongly expressing in roots. Furthermore, five miRNAs were predicted and could have a role in root conservation.

Photoperiod and gravistimulation-associated Tiller Angle Control 1 modulates dynamic changes in rice plant architecture.

TAC1 is involved in photoperiodic and gravitropic responses to modulate rice dynamic plant architecture likely by affecting endogenous auxin distribution, which could explain TAC1 widespread distribution in indica rice. Plants experience a changing environment throughout their growth, which requires dynamic adjustments of plant architecture in response to these environmental cues. Our previous study demonstrated that Tiller Angle Control 1 (TAC1) modulates dynamic changes in plant architecture in rice; however, the underlying regulatory mechanisms remain largely unknown. In this study, we show that TAC1 regulates plant architecture in an expression dose-dependent manner, is highly expressed in stems, and exhibits dynamic expression in tiller bases during the growth period. Photoperiodic treatments revealed that TAC1 expression shows circadian rhythm and is more abundant during the dark period than during the light period and under short-day conditions than under long-day conditions. Therefore, it contributes to dynamic plant architecture under long-day conditions and loose plant architecture under short-day conditions. Gravity treatments showed that TAC1 is induced by gravistimulation and negatively regulates shoot gravitropism, likely by affecting auxin distribution. Notably, the tested indica rice containing TAC1 displayed dynamic plant architecture under natural long-day conditions, likely explaining the widespread distribution of TAC1 in indica rice. Our results provide new insights into TAC1-mediated regulatory mechanisms for dynamic changes in rice plant architecture.

LAZY3 interacts with LAZY2 to regulate tiller angle by modulating shoot gravity perception in rice.

Starch biosynthesis in gravity-sensing tissues of rice shoot determines the magnitude of rice shoot gravitropism and thus tiller angle. However, the molecular mechanism underlying starch biosynthesis in rice gravity-sensing tissues is still unclear. We characterized a novel tiller angle gene LAZY3 (LA3) in rice through map-based cloning. Biochemical, molecular and genetic studies further demonstrated the essential roles of LA3 in gravity perception of rice shoot and tiller angle control. The shoot gravitropism and lateral auxin transport were defective in la3 mutant upon gravistimulation. We showed that LA3 encodes a chloroplast-localized tryptophan-rich protein associated with starch granules via Tryptophan-rich region (TRR) domain. Moreover, LA3 could interact with the starch biosynthesis regulator LA2, determining starch granule formation in shoot gravity-sensing tissues. LA3 and LA2 negatively regulate tiller angle in the same pathway acting upstream of LA1 to mediate asymmetric distribution of auxin. Our study defined LA3 as an indispensable factor of starch biosynthesis in rice gravity-sensing tissues that greatly broadens current understanding in the molecular mechanisms underlying the starch granule formation in gravity-sensing tissues, and provides new insights into the regulatory mechanism of shoot gravitropism and rice tiller angle.

The Citrus sinensis TILLER ANGLE CONTROL 1 (CsTAC1) gene regulates tree architecture in sweet oranges by modulating the endogenous hormone content

Citrus is a major fruit crop cultivated on a global scale. Citrus trees are long lived perennials with a large canopy. Understanding the genetic control of tree architecture could provide tools for breeding and selection of citrus cultivars suitable for high density planting with improved light exposure. Tree architecture is modulated by the TILLER ANGLE CONTROL 1 (TAC1) gene which plays an important role in the regulation of the shoot angle. Herein, we used CRISPR/Cas9 technology to knockout the CsTAC1 gene for the biochemical and molecular analysis of its function. Nine transgenic lines were obtained, and five edited plants were confirmed based on T7EI mismatch detection assay and Sanger sequencing. The transgenic citrus lines exhibited pleiotropic phenotypes, including differences in branch angle and stem growth. Additionally, silencing CsTAC1 led to enhanced CsLAZY1 transcript levels in the tested lines. Analysis of the phytohormonal profile revealed that TAC1-edited plants exhibited lower auxin contents and increased cytokinin levels in the leaves compared to the wild-type plants. The GA7 gibberellin level was enhanced in most of the edited lines. Collectively, TAC1 affects branch angle in association with hormone signals in citrus.

Tiller Angle Control 1 Is Essential for the Dynamic Changes in Plant Architecture in Rice.

Plant architecture is dynamic as plants develop. Although many genes associated with specific plant architecture components have been identified in rice, genes related to underlying dynamic changes in plant architecture remain largely unknown. Here, we identified two highly similar recombinant inbred lines (RILs) with different plant architecture: RIL-Dynamic (D) and RIL-Compact (C). The dynamic plant architecture of RIL-D is characterized by ‘loosetiller angle (tillering stage)–compact (heading stage)–loosecurved stem (maturing stage)’ under natural long-day (NLD) conditions, and ‘loosetiller angle (tillering and heading stages)–loosetiller angle and curved stem (maturing stage)’ under natural short-day (NSD) conditions, while RIL-C exhibits a compact plant architecture both under NLD and NSD conditions throughout growth. The candidate locus was mapped to the chromosome 9 tail via the rice 8K chip assay and map-based cloning. Sequencing, complementary tests, and gene knockout tests demonstrated that Tiller Angle Control 1 (TAC1) is responsible for dynamic plant architecture in RIL-D. Moreover, TAC1 positively regulates loose plant architecture, and high TAC1 expression cannot influence the expression of tested tiller-angle-related genes. Our results reveal that TAC1 is necessary for the dynamic changes in plant architecture, which can guide improvements in plant architecture during the modern super rice breeding.

Functional Characterization of MdTAC1a Gene Related to Branch Angle in Apple (Malus x domestica Borkh.).

The Tiller Angle Control 1 (TAC1) gene belongs to the IGT family, which mainly controls plant branch angle, thereby affecting plant form. Two members of MdTAC1 are identified in apple; the regulation of apple branch angle by MdTAC1 is still unclear. In this study, a subcellular localization analysis detected MdTAC1a in the nucleus and cell membrane, but MdTAC1b was detected in the cell membrane. Transgenic tobacco by overexpression of MdTAC1a or MdTAC1b showed enlarged leaf angles, the upregulation of several genes, such as GA 2-oxidase (GA2ox), and a sensitive response to light and gravity. According to a qRT-PCR analysis, MdTAC1a and MdTAC1b were strongly expressed in shoot tips and vegetative buds of weeping cultivars but were weakly expressed in columnar cultivars. In the MdTAC1a promoter, there were losses of 2 bp in spur cultivars and 6 bp in weeping cultivar compared with standard and columnar cultivars. An InDel marker specific to the MdTAC1a promoter was developed to distinguish apple cultivars and F1 progeny. We identified a protein, MdSRC2, that interacts with MdTAC1a, whose encoding gene which was highly expressed in trees with large branch angles. Our results indicate that differences in the MdTAC1a promoter are major contributors to branch-angle variation in apple, and the MdTAC1a interacts with MdSRC2 to affect this trait.

Targeted CRISPR/Cas9-Based Knock-Out of the Rice Orthologs TILLER ANGLE CONTROL 1 (TAC1) in Poplar Induces Erect Leaf Habit and Shoot Growth

Pyramidal-, erect- or upright-growing plant forms are characterized by narrow branch angles of shoots and leaves. The putative advantage of upright-leaf and shoot habit could be a more efficient penetration of light into lower canopy layers. Pyramidal genotypes have already been reported for various tree genotypes including peach. The paralogous rice ortholog TILLER ANGLE CONTROL 1 (TAC1) has been proposed to be the responsible gene for upright growth. However, it has not really been demonstrated for any of the pyramidal tree genotypes that a knock-out mutation of the TAC1 gene is causing pyramidal plant growth. By in silico analyses, we have identified a putative rice TAC1 ortholog (Potri.014G102600, “TAC-14”) and its paralog (Potri.002G175300, “TAC-2”) in the genome of P. trichocarpa. Two putative PcTAC1 orthologs in the P. × canescens clone INRA 717-1B4 were successfully knocked-out by applying a transgenic CRISPR/Cas9-approach. The mutants were molecularly analyzed and phenotyped over a period of three years in a glasshouse. Our results indicate that the homozygous knock-out of “TAC-14” is sufficient to induce pyramidal plant growth in P. × canescens. If up to twice as many pyramidal individuals were planted on short rotation coppices (SRCs), this could lead to higher wood yield, without any breeding, simply by increasing the number of trees on a default field size.

A single-cell analysis of the Arabidopsis vegetative shoot apex.

The shoot apical meristem allows for reiterative formation of new aerial structures throughout the life cycle of a plant. We use single-cell RNA sequencing to define the cellular taxonomy of the Arabidopsis vegetative shoot apex at the transcriptome level. We find that the shoot apex is composed of highly heterogeneous cells, which can be partitioned into 7 broad populations with 23 transcriptionally distinct cell clusters. We delineate cell-cycle continuums and developmental trajectories of epidermal cells, vascular tissue, and leaf mesophyll cells and infer transcription factors and gene expression signatures associated with cell fate decisions. Integrative analysis of shoot and root apical cell populations further reveals common and distinct features of epidermal and vascular tissues. Our results, thus, offer a valuable resource for investigating the basic principles underlying cell division and differentiation in plants at single-cell resolution.

Genome-Wide Identification and Characterization of the IGT Gene Family in Allotetraploid Rapeseed (Brassica napus L.).

IGT family genes function critically to regulate lateral organ orientation in plants. However, little information is available about this family of genes in Brassica napus. In this study, 27 BnIGT genes were identified on 16 chromosomes and divided into seven clades, namely LAZY1∼LAZY6 and TAC1 (Tiller Angle Control 1), based on their phylogenetic relationships. Duplication analysis revealed that 91.1% of the gene pairs were derived from whole-genome duplication. Most BnIGT genes had a similar structural pattern with one or two very short exons followed by a long and a shorter exon. Common and specific motifs were identified among the seven clades, and motif 1, containing the family-specific GφL(A/T)IGT sequence, was observed in all clades except LAZY5. Three types of cis-elements pertinent to transcription factor binding, light responses, and hormone signaling were detected in the BnIGT promoters. Intriguingly, more than half of the BnIGT genes exhibited no or very low expression in various tissues, and the LAZY1 and TAC1 clade members showed distinct tissue expression preferences. Coexpression analysis revealed that the LAZY1 members had strong associations with cell wall biosynthesis genes. This analysis provides a deeper understanding of the BnIGT gene family and will facilitate further deduction of their role in regulating plant architecture in B. napus.

LAZY1 Controls Tiller Angle and Shoot Gravitropism by Regulating the Expression of Auxin Transporters and Signaling Factors in Rice.

Tiller angle is a key factor determining rice plant architecture, planting density, light interception, photosynthetic efficiency, disease resistance and grain yield. However, the mechanisms underlying tiller angle control are far from clear. In this study, we identified a mutant, termed bta1-1, with an enlarged tiller angle throughout its life cycle. A detailed analysis reveals that BTA1 has multiple functions because tiller angle, shoot gravitropism and tolerance to drought stress are changed in bta1-1 plants. Moreover, BTA1 is a positive regulator of shoot gravitropism in rice. Shoot responses to gravistimulation are disrupted in bta1-1 under both light and dark conditions. Gene cloning reveals that bta1-1 is a novel mutant allele of LA1 renamed la1-SN. LA1 is able to rescue the tiller angle and shoot gravitropism defects observed in la1-SN. The nuclear localization signal of LA1 is disrupted by la1-SN, causing changes in its subcellular localization. LA1 is required to regulate the expression of auxin transporters and signaling factors that control shoot gravitropism and tiller angle. High-throughput mRNA sequencing is performed to elucidate the molecular and cellular functions of LA1. The results show that LA1 may be involved in the nucleosome and chromatin assembly, and protein-DNA interactions to control gene expression, shoot gravitropism and tiller angle. Our results provide new insight into the mechanisms whereby LA1 controls shoot gravitropism and tiller angle in rice.

TAC4 controls tiller angle by regulating the endogenous auxin content and distribution in rice.

Tiller angle, an important component of plant architecture, greatly influences the grain yield of rice (Oryza sativa L.). Here, we identified Tiller Angle Control 4 (TAC4) as a novel regulator of rice tiller angle. TAC4 encodes a plant‐specific, highly conserved nuclear protein. The loss of TAC4 function leads to a significant increase in the tiller angle. TAC4 can regulate rice shoot gravitropism by increasing the indole acetic acid content and affecting the auxin distribution. A sequence analysis revealed that TAC4 has undergone a bottleneck and become fixed in indica cultivars during domestication and improvement. Our findings facilitate an increased understanding of the regulatory mechanisms of tiller angle and also provide a potential gene resource for the improvement of rice plant architecture.

TILLER ANGLE CONTROL 1 modulates plant architecture in response to photosynthetic signals.

Light serves as an important environmental cue in regulating plant architecture. Previous work had demonstrated that both photoreceptor-mediated signaling and photosynthesis play a role in determining the orientation of plant organs. TILLER ANGLE CONTROL 1 (TAC1) was recently shown to function in setting the orientation of lateral branches in diverse plant species, but the degree to which it plays a role in light-mediated phenotypes is unknown. Here, we demonstrated that TAC1 expression was light dependent, as expression was lost under continuous dark or far-red growth conditions, but did not drop to these low levels during a diurnal time course. Loss of TAC1 in the dark was gradual, and experiments with photoreceptor mutants indicated this was not dependent upon red/far-red or blue light signaling, but partially required the signaling integrator CONSTITUTIVE PHOTOMORPHOGENESIS 1 (COP1). Overexpression of TAC1 partially prevented the narrowing of branch angles in the dark or under far-red light. Treatment with the carotenoid biosynthesis inhibitor norflurazon or the PSII inhibitor 3-(3,4-dichlorophenyl)-1,1-dimethylurea (DCMU) led to loss of TAC1 expression similar to dark or far-red conditions, but expression increased in response to the PSI inhibitor paraquat. Treatment of adult plants with norflurazon resulted in upward growth angle of branch tips. Our results indicate that TAC1 plays an important role in modulating plant architecture in response to photosynthetic signals.

Alteration of TAC1 expression in Prunus species leads to pleiotropic shoot phenotypes

Prunus persica (peach) trees carrying the “Pillar” or “Broomy” trait (br) have vertically oriented branches caused by loss-of-function mutations in a gene called TILLER ANGLE CONTROL 1 (TAC1). TAC1 encodes a protein in the IGT gene family that includes LAZY1 and DEEPER ROOTING 1 (DRO1), which regulate lateral branch and root orientations, respectively. Here we found that some of the native TAC1 alleles in the hexaploid plum species Prunus domestica, which has a naturally more upright stature, contained a variable length trinucleotide repeat within the same exon 3 region previously found to be disrupted in pillar peach trees. RNAi silencing of TAC1 in plum resulted in trees with severely vertical branch orientations similar to those in pillar peaches but with an even narrower profile. In contrast, PpeTAC1 overexpression in plum led to trees with wider branch angles and more horizontal branch orientations. Pillar peach trees and transgenic plum lines exhibited pleiotropic phenotypes, including differences in trunk and branch diameter, stem growth, and twisting branch phenotypes. Expression profiling of pillar peach trees revealed differential expression of numerous genes associated with biotic and abiotic stress, hormone responses, plastids, reactive oxygen, secondary, and cell wall metabolism. Collectively, the data provide important clues for understanding TAC1 function and show that alteration of TAC1 expression may have broad applicability to agricultural and ornamental tree industries.

A Novel Tiller Angle Gene, TAC3, together with TAC1 and D2 Largely Determine the Natural Variation of Tiller Angle in Rice Cultivars.

Tiller angle is one of the most important components of the ideal plant architecture that can greatly enhance rice grain yield. Understanding the genetic basis of tiller angle and mining favorable alleles will be helpful for breeding new plant-type varieties. Here, we performed genome-wide association studies (GWAS) to identify genes controlling tiller angle using 529 diverse accessions of Oryza sativa including 295 indica and 156 japonica accessions in two environments. We identified 7 common quantitative trait loci (QTLs), including the previously reported major gene Tiller Angle Control 1 (TAC1), in the two environments, 10 and 13 unique QTLs in Hainan and Wuhan, respectively. More QTLs were identified in indica than in japonica, and three major QTLs (qTA3, qTA1b/DWARF2 (D2) and qTA9c/TAC1) were fixed in japonica but segregating in indica, which explained the wider variation observed in indica compared with that in japonica. No common QTLs were identified between the indica and japonica subpopulations. Mutant analysis for the candidate gene of qTA3 on chromosome 3 indicated a novel gene, Tiller Angle Control 3 (TAC3), encoding a conserved hypothetical protein controlling tiller angle. TAC3 is preferentially expressed in the tiller base. The ebisu dwarf (d2) mutant exhibited a decreased tiller angle, in addition to its previously described abnormal phenotype. A nucleotide diversity analysis revealed that TAC3, D2 and TAC1 have been subjected to selection during japonica domestication. A haplotype analysis identified favorable alleles of TAC3, D2 and TAC1, which may be used for breeding plants with an ideal architecture. In conclusion, there is a diverse genetic basis for tiller angle between the two subpopulations, and it is the novel gene TAC3 together with TAC1, D2, and other newly identified genes in this study that controls tiller angle in rice cultivars.

PpeTAC1 promotes the horizontal growth of branches in peach trees and is a member of a functionally conserved gene family found in diverse plants species

Trees are capable of tremendous architectural plasticity, allowing them to maximize their light exposure under highly competitive environments. One key component of tree architecture is the branch angle, yet little is known about the molecular basis for the spatial patterning of branches in trees. Here, we report the identification of a candidate gene for the br mutation in Prunus persica (peach) associated with vertically oriented growth of branches, referred to as 'pillar' or 'broomy'. Ppa010082, annotated as hypothetical protein in the peach genome sequence, was identified as a candidate gene for br using a next generation sequence-based mapping approach. Sequence similarity searches identified rice TAC1 (tiller angle control 1) as a putative ortholog, and we thus named it PpeTAC1. In monocots, TAC1 is known to lead to less compact growth by increasing the tiller angle. In Arabidopsis, an attac1 mutant showed more vertical branch growth angles, suggesting that the gene functions universally to promote the horizontal growth of branches. TAC1 genes belong to a gene family (here named IGT for a shared conserved motif) found in all plant genomes, consisting of two clades: one containing TAC1-like genes; the other containing LAZY1, which contains an EAR motif, and promotes vertical shoot growth in Oryza sativa (rice) and Arabidopsis through influencing polar auxin transport. The data suggest that IGT genes are ancient, and play conserved roles in determining shoot growth angles in plants. Understanding how IGT genes modulate branch angles will provide insights into how different architectural growth habits evolved in terrestrial plants.

Molecular Evolution of the TAC1 Gene from Rice (Oryza sativa L.)

Tiller angle is a key feature of the architecture of cultivated rice (Oryza sativa), since it determines planting density and influences rice yield. Our previous work identified Tiller Angle Control 1 (TAC1) as a major quantitative trait locus that controls rice tiller angle. To further clarify the evolutionary characterization of the TAC1 gene, we compared a TAC1-containing 3164-bp genomic region among 113 cultivated varieties and 48 accessions of wild rice, including 43 accessions of O. rufipogon and five accessions of O. nivara. Only one single nucleotide polymorphism (SNP), a synonymous substitution, was detected in TAC1 coding regions of the cultivated rice varieties, whereas one synonymous and one nonsynonymous SNP were detected among the TAC1 coding regions of wild rice accessions. These data indicate that little natural mutation and modification in the TAC1 coding region occurred within the cultivated rice and its progenitor during evolution. Nucleotide diversities in the TAC1 gene regions of O. sativa and O. rufipogon of 0.00116 and 0.00112, respectively, further indicate that TAC1 has been highly conserved during the course of rice domestication. A functional nucleotide polymorphism (FNP) of TAC1 was only found in the japonica rice group. A neutrality test revealed strong selection, especially in the 3'-flanking region of the TAC1 coding region containing the FNP in the japonica rice group. However, no selection occurred in the indica and wild-rice groups. A phylogenetic tree derived from TAC1 sequence analysis suggests that the indica and japonica subspecies arose independently during the domestication of wild rice.

TAC1, a major quantitative trait locus controlling tiller angle in rice

A critical step during rice (Oryza sativa) cultivation is dense planting: a wider tiller angle will increase leaf shade and decrease photosynthesis efficiency, whereas a narrower tiller angle makes for more efficient plant architecture. The molecular basis of tiller angle remains unknown. This research demonstrates that tiller angle is controlled by a major quantitative trait locus, TAC1 (Tiller Angle Control 1). TAC1 was mapped to a 35-kb region on chromosome 9 using a large F(2) population from crosses between an indica rice, IR24, which displays a relatively spread-out plant architecture, and an introgressed line, IL55, derived from japonica rice Asominori, which displays a compact plant architecture with extremely erect tillers. Genetic complementation further identified the TAC1 gene, which harbors three introns in its coding region and a fourth 1.5-kb intron in the 3'-untranslated region. A mutation in the 3'-splicing site of this 1.5-kb intron from 'AGGA' to 'GGGA' decreases the level of tac1, resulting in a compact plant architecture with a tiller angle close to zero. Further sequence verification of the mutation in the 3'-splicing site of the 1.5-kb intron revealed that the tac1 mutation 'GGGA' was present in 88 compact japonica rice accessions and TAC1 with 'AGGA' was present in 21 wild rice accessions and 43 indica rice accessions, all with the spread-out form, indicating that tac1 had been extensively utilized in densely planted rice grown in high-latitude temperate areas and at high altitudes where japonica rice varieties are widely cultivated.

95/00109 Black powder — An explosion in market demand

Tiller angle is a key feature of the architecture of cultivated rice (Oryza sativa), since it determines planting density and influences rice yield. Our previous work identified Tiller Angle Control 1 (TAC1) as a major quantitative trait locus that controls rice tiller angle. To further clarify the evolutionary characterization of the TAC1 gene, we compared a TAC1-containing 3164-bp genomic region among 113 cultivated varieties and 48 accessions of wild rice, including 43 accessions of O. rufipogon and five accessions of O. nivara. Only one single nucleotide polymorphism (SNP), a synonymous substitution, was detected in TAC1 coding regions of the cultivated rice varieties, whereas one synonymous and one nonsynonymous SNP were detected among the TAC1 coding regions of wild rice accessions. These data indicate that little natural mutation and modification in the TAC1 coding region occurred within the cultivated rice and its progenitor during evolution. Nucleotide diversities in the TAC1 gene regions of O. sativa and O. rufipogon of 0.00116 and 0.00112, respectively, further indicate that TAC1 has been highly conserved during the course of rice domestication. A functional nucleotide polymorphism (FNP) of TAC1 was only found in the japonica rice group. A neutrality test revealed strong selection, especially in the 3′-flanking region of the TAC1 coding region containing the FNP in the japonica rice group. However, no selection occurred in the indica and wild-rice groups. A phylogenetic tree derived from TAC1 sequence analysis suggests that the indica and japonica subspecies arose independently during the domestication of wild rice.